msm8916-openwrt/target/linux/mediatek/dts
Dirk Buchwalder 9e49593ff7 mediatek: filogic: add support for TP-LINK RE6000XD
This commit adds support for TP-LINK RE6000XD.
The device is quite similar to the Mercusys MR90X V1,
except only 3 LAN ports and more LEDs.
So thanks to csharper2005 for doing all the groundwork.

Device specification
--------------------
SoC Type:   MediaTek MT7986BLA, Cortex-A53, 64-bit
RAM:        MediaTek MT7986BLA (512MB)
Flash:      SPI NAND GigaDevice (128 MB)
Ethernet:   MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8)
Ethernet:   1x2.5Gbe (LAN3 2.5Gbps), 2xGbE (LAN 1Gbps, LAN1,
            LAN2)
WLAN 2g:    MediaTek MT7975N, b/g/n/ax, MIMO 4x4
WLAN 5g:    MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4
LEDs:       8 LEDs, 1 status blue, 2x WIFI blue, 2x signal
	    blue/red, 3 LAN blue gpio-controlled
Button:     2 (Reset, WPS)
USB ports:  No
Power:      12 VDC, 2 A
Connector:  Barrel
Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, ubi0
            partition contain "seconduboot" (also U-Boot 2022.01-rc4)

Serial console (UART), unpopulated
---------------------
                            V
+-------+-------+-------+-------+
| +3.3V |  GND  |  TX   |  RX   |
+---+---+-------+-------+-------+
    |
    +--- Don't connect

Disassemble: rm the 2 screws at the bottom and the one at the backside.
            un-clip the case starting at the edge above the LEDs.

Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot openwrt-mediatek-filogic-tplink_re6000xd-initramfs-kernel.bin bootm
4. Run 'sysupgrade -n' with the sysupgrade OpenWrt image

Notice: while I was successfull at activating ssh (as described
        here:
        https://www.lisenet.com/2023/gaining-ssh-access-to-tp-link-re200-wi-fi-range-extender/)

        Unfortunately I haven't found the correct root password.
        Looks like they are using a static password
        (md5crypt, salt + 21 characters) that is not the web
        interface admin password.

        The TP-LINK RE900XD looks like the very same device,
        according to the pictures and the firmware.
        But I haven't checked if the OpenWrt firmware works as well
        on that device.

        The second ubi partition (ubi1) is empty and there is no known
        dual-partition mechanism, neither in u-boot nor in the stock firmware.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
2024-07-04 22:14:32 +02:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-netgear-wax206.dts mediatek: correct address of MT753x switch IC 2024-05-09 19:43:54 +02:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: correct address of MT753x switch IC 2024-05-09 19:43:54 +02:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981a-edgecore-eap111.dts mediatek: filogic: add support for Edgecore EAP111 2024-04-11 13:25:11 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-cetron-ct3003.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: add CMCC RAX3000M support 2023-10-28 19:05:07 +02:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-cmcc-rax3000m.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-confiabits-mt7981.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: filogic: prevent faulty mac address assignment 2024-05-25 12:41:26 +02:00
mt7981b-cudy-re3000-v1.dts mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
mt7981b-cudy-tr3000-v1.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: filogic: Cudy WR3000 v1 wps button fix 2024-02-26 11:26:22 +01:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts filogic: Add support for D-Link AQUILA PRO AI M30 2024-03-31 19:01:20 +02:00
mt7981b-glinet-gl-mt2500.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-glinet-gl-mt3000.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-jcg-q30-pro.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-nokia-ea0326gmp.dts mediatek: fix wps button for nokia ea0326gmp 2024-06-07 14:19:39 +02:00
mt7981b-openembed-som7981.dts mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
mt7981b-openwrt-one.dts mediatek/filogic: add OpenWrt One support 2024-05-21 11:35:38 +02:00
mt7981b-qihoo-360t7.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-routerich-ax3000.dts mediatek: fixes typo for spi properties 2024-01-14 23:11:57 +00:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01-nand.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01.dtsi mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: filogic: Add support for Wavlink WL-WN586X3 2024-06-09 14:58:25 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: add support for Zbtlink ZBT-Z8103AX 2023-12-26 00:02:19 +01:00
mt7981b-zyxel-nwa50ax-pro.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-acelink-ew-7886cax.dts mediatek: filogic: add Acelink EW-7886CAX support 2023-12-05 09:06:47 +01:00
mt7986a-acer-predator-w6.dts mediatek: fix DTS defining mt7530 switch phys but not referencing them 2024-04-13 18:49:30 +01:00
mt7986a-asus-rt-ax59u.dts mediatek: filogic: asus-rt-ax59u: use NVMEM-on-UBI 2024-02-23 14:35:00 +00:00
mt7986a-asus-tuf-ax4200.dts mediatek: fix DTS defining mt7530 switch phys but not referencing them 2024-04-13 18:49:30 +01:00
mt7986a-asus-tuf-ax6000.dts mediatek: ASUS TUF-AX6000: fix phy-handle numbering 2024-05-08 22:19:09 +01:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: filogic: bpi-r3-mini: fix power on M.2 slot 2024-02-16 13:56:01 +00:00
mt7986a-glinet-gl-mt6000.dts mediatek: filogic: convert GL.iNet MT-6000 to NVMEM-on-MMC 2024-02-18 03:26:15 +00:00
mt7986a-jdcloud-re-cp-03.dts mediatek: convert eeprom/macaddr to nvmem format for jdcloud re-cp-03 2024-06-10 10:08:19 +02:00
mt7986a-netcore-n60.dts mediatek: filogic: add Netcore N60 support 2024-03-29 22:54:28 +01:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: add support for Ruijie RG-X60 Pro 2024-06-05 17:44:11 +01:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-tl-xdr4288.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: filogic: switch TP-LINK XDR series to fitblk 2024-04-09 15:07:41 +01:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts 2024-03-08 16:51:35 +08:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-zyxel-ex5700-telenor.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: remove deprecated led "label" properties 2024-01-06 00:46:15 +01:00
mt7986b-netgear-wax220.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986b-tplink-re6000xd.dts mediatek: filogic: add support for TP-LINK RE6000XD 2024-07-04 22:14:32 +02:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00