forked from Openwrt/openwrt
eb13076e77
The upstream solution to define the MDIO bus in DT is a bit more strict than our previous downstream solution doing the same thing and now requires switch PHYs to be referenced in DT as well. Arınç Ünal told us in #15141: "With [the now upstream patch written by him which we backported], the switch MDIO bus won't be assigned to ds->user_mii_bus when the switch MDIO bus is defined on the device tree anymore. This was not the case with the downstream patch. When ds->user_mii_bus is populated, DSA will 1:1 map the port with PHY. Meaning port with address 1 will be mapped to PHY with address 1. Because that ds->user_mii_bus is not populated when the switch MDIO bus is defined on the device tree, on every port node, the PHY address must be supplied by the phy-handle property." Add those phy-handles to affected devices' DT. Fixes: 4354b34f6f ("generic: 6.6: sync mt7530 DSA driver with upstream") Fixes: 401a6ccfaf ("generic: 6.1: sync mt7530 DSA driver with upstream") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
508 lines
9.6 KiB
Plaintext
508 lines
9.6 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "Acer Predator W6";
|
|
compatible = "acer,predator-w6", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
led-boot = &led_status;
|
|
led-failsafe = &led_status;
|
|
led-running = &led_status;
|
|
led-upgrade = &led_status;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs = "dm-mod.create=\"dm-verity,,,ro,0 31544 verity 1 PARTLABEL=rootfs PARTLABEL=rootfs 4096 4096 3943 3944 sha256 2f969fa9e9e4e20b37746f22633e85b178f5db7c143e11f92733a704299cc933 2dd56e34b15c6c84573cf26c4392028421061d2c808975217b45e9a5b49d2087\" rootfstype=squashfs,ext4 rootwait root=/dev/mmcblk0p6 fstools_ignore_partname=1";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x20000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
factory {
|
|
label = "factory";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_status: led@0 {
|
|
label = "ant0:red";
|
|
gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@1 {
|
|
label = "ant0:green";
|
|
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@2 {
|
|
label = "ant0:blue";
|
|
gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@3 {
|
|
label = "ant1:red";
|
|
gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@4 {
|
|
label = "ant1:green";
|
|
gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@5 {
|
|
label = "ant1:blue";
|
|
gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@6 {
|
|
label = "ant2:red";
|
|
gpios = <&pio 38 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@7 {
|
|
label = "ant2:green";
|
|
gpios = <&pio 37 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@8 {
|
|
label = "ant2:blue";
|
|
gpios = <&pio 26 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@9 {
|
|
label = "ant3:red";
|
|
gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@10 {
|
|
label = "ant3:green";
|
|
gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@11 {
|
|
label = "ant3:blue";
|
|
gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@12 {
|
|
label = "ant4:red";
|
|
gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@13 {
|
|
label = "ant4:green";
|
|
gpios = <&pio 27 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@14 {
|
|
label = "ant4:blue";
|
|
gpios = <&pio 32 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@15 {
|
|
label = "ant5:red";
|
|
gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@16 {
|
|
label = "ant5:green";
|
|
gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led@17 {
|
|
label = "ant5:blue";
|
|
gpios = <&pio 43 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
/* LAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
/* WAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
|
|
/* LED0: nc ; LED1: nc ; LED2: Amber ; LED3: Green */
|
|
mxl,led-config = <0x0 0x0 0x370 0x80>;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
mmc0_pins_default: mmc0-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0-uhs-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
};
|
|
|
|
pcie_pins: pcie-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie_pereset";
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
wf_dbdc_pins: wf-dbdc-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_dbdc";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "game";
|
|
phy-handle = <&swphy0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
phy-handle = <&swphy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-handle = <&swphy2>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
phy-handle = <&swphy3>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
swphy0: phy@0 {
|
|
reg = <0>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0xc001 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy1: phy@1 {
|
|
reg = <1>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0xc001 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy2: phy@2 {
|
|
reg = <2>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0xc001 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy3: phy@3 {
|
|
reg = <3>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0xc001 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
pinctrl-names = "default", "dbdc";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
pinctrl-1 = <&wf_dbdc_pins>;
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
bus-width = <0x08>;
|
|
max-frequency = <200000000>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
hs400-ds-delay = <0x14014>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|