Lakka-LibreELEC/projects/Rockchip/README.md
Alex Bee d07974f0cc Rockchip: bootloader: allow ROCKCHIP_LEGACY_BOOT to be passed from command line
Also document that option in README.md and drop the non-required U_BOOT_CONFIG form bootloader/install script
2023-02-11 11:48:39 +01:00

1.9 KiB

Rockchip

This project is for Rockchip SoC devices

Devices

RK3288

RK3328

RK3399

My single-board computer is not listed, will it be added in the future?
If your single-board computer uses a current generation SoC listed on http://opensource.rock-chips.com/wiki_Main_Page the odds are in your favor.

My Android device is not listed, will it be added in the future?
You may have luck if your device vendor is open source friendly, otherwise keep using Android for best support.

My device does not boot and I don't understand why.
If your device has Android or any sort of vendor u-boot preinstalled in EMMC or SPI, make sure to add ROCKCHIP_LEGACY_BOOT=1 when building an image. This is done automatically for supported devices, which are known to come with Android preinstalled.

Useful debug commands

  • cat /sys/kernel/debug/dri/0/state
  • cat /sys/kernel/debug/dri/0/framebuffer
  • cat /sys/kernel/debug/dma_buf/bufinfo
  • cat /sys/kernel/debug/cec/cec0/status
  • hexdump -C /sys/class/drm/card0-HDMI-A-1/edid
  • edid-decode /sys/class/drm/card0-HDMI-A-1/edid
  • cat /sys/kernel/debug/clk/clk_summary
  • cat /sys/kernel/debug/regulator/regulator_summary