xx530v Algar custom firmware bootlog #1

New Issue

Closed

opened 2026-02-08 18:47:47 +00:00 by kvn193 · 6 comments

kvn193 commented 2026-02-08 18:47:47 +00:00

Copy Link

Copy Source

EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1e, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=512MB


U-Boot 2014.04-rc1 (Jan 09 2025 - 07:27:55)

DRAM:  496 MiB
EN7529CT
Now running in RAM - U-Boot at: 9edff000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash :  _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In:    serial
Out:   serial
Err:   serial
CPU0: found redistributor 0 region 0:9ee3d9d8
Net:   ecnt_eth
               Uip activated
use flash mac: BC: 7:1D:7A:B2:B8
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 465:  CPE init
[ cp_initCommProto ] 277:  g_commProtoConfig.myMac: bc:07:1d:7a:b2:b8
Boot flag csum incorrect, return image0
[ os_initCPEInfo ] 279:  hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 280:  sw ver: 0.5.0 3.0.0 v6096
[ os_initCPEInfo ] 287:  sn: 22515X8006387
[ os_initCPEInfo ] 290:  pin: 70041675
[ os_initCPEInfo ] 297:  endian: 0
[ os_initCPEInfo ] 300:  acFlag: 0
[ CPEinit ] 489:  CPE is idle
Hit any key to stop autoboot:  0
Boot flag csum incorrect, return image0
Prepare to boot image0
Boot flag csum incorrect, return image0
bootm flag=0, states=70f
## Loading kernel from FIT Image at 81800200 ...
   Using 'conf@1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ECONET Linux kernel
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x818022a4
     Data Size:    2602809 Bytes = 2.5 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80088000
     Entry Point:  0x80088000
     Hash algo:    sha1
     Hash value:   c0ce34b56f1492e563f4555d788913627dbecd8f
## Loading fdt from FIT Image at 81800200 ...
   Using 'conf@1' configuration
   Trying 'fdt@1' fdt subimage
     Description:  ECONET Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x818002fc
     Data Size:    7913 Bytes = 7.7 KiB
     Architecture: ARM
     Hash algo:    sha1
     Hash value:   73fbebcf3dfc0e0007752bdeff8c7c0f35611f24
   Booting using the fdt blob at 0x818002fc
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 9cdf2000, end 9cdf6ee8 ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.115 (compile@3afbd4ef4a54) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Thu Jan 9 07:30:07 UTC 2025
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: econet,en7523
bootconsole [uart0] enabled
Memory policy: Data cache writealloc
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
[c05142b8]npu_pkt_buf_addr=9ddf1fc0:9ddf1fc0
npu_pkt_buffer memblock_alloc:9ddf1fc0,buf_size=1600000

PERCPU: Embedded 12 pages/cpu @dddd7000 s18048 r8192 d22912 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129728
Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=BC:07:1D:7A:B2:B8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 480204K/523008K available (4796K kernel code, 168K rwdata, 1548K rodata, 244K init, 638K bss, 42804K reserved, 0K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbec00000 - 0xbfe00000   (  18 MB)
      .text : 0xc0088000 - 0xc06ba468   (6346 kB)
      .init : 0xc06bb000 - 0xc06f8000   ( 244 kB)
      .data : 0xc06f8000 - 0xc0722140   ( 169 kB)
       .bss : 0xc0725000 - 0xc07c4be0   ( 639 kB)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
NR_IRQS:64 nr_irqs:64 64
CPU0: found redistributor 0 region 0:0x09080000
Architected cp15 timer(s) running at 25.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 40ns
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [uart0] disabled
bootconsole [uart0] disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys debug
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80088280 - 0x800882d8
CPU1: found redistributor 1 region 0:0x090a0000
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (100.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.

l2c_sram_size:0x0
Initializing Ecnt Event Netlink Socket
Initializing Econet Event Netlink Socket nl_sk = dd577800
ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
sgmii probe init start
sgmii:int_name: sgmii_pcie0
sgmii:int_id: 0
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= e087c100
sgmii:sgmii->pcs2_base= e087ea00
sgmii:sgmii->an_base=   e0944000
sgmii:sgmii->ra_base=   e0946600
sgmii:sgmii->phya_base=   e0948c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=e087ea20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_pcie1
sgmii:int_id: 1
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= e094a100
sgmii:sgmii->pcs2_base= e094ca00
sgmii:sgmii->an_base=   e094e000
sgmii:sgmii->ra_base=   e0950600
sgmii:sgmii->phya_base=   e0952c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=e094ca20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_usb0
sgmii:int_id: 2
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= e0954100
sgmii:sgmii->pcs2_base= e0956a00
sgmii:sgmii->an_base=   e0958000
sgmii:sgmii->ra_base=   e095a600
sgmii:sgmii->phya_base=   e095cc00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=e0956a20, val=0
sgmii: sync_int exit
sgmii probe init exit
TC3162 hardware watchdog module loaded.
irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe
[crypto_k] res->name:/crypto_k@1fb70000
[crypto_k] res->start:0x1fb70000 ===
[crypto_k] res->end:0x1fb70803 ===
[crypto_k] ecnt_crypto_k->base:0xe09dc000
[trng] ecnt_trng_drv_probe
test_uc:e0826000 test_c:dd4c0000 cpu_top->base:e09e6800
[apb_timer] ecnt_timer_drv_probe
[timer] ecnt_timer->irq: 80
[timer] res->name:/apb_timer1@1fbf0100

i2c_slave init(ecnt_i2c_slave_drv_probe) done
[i2s] ecnt_i2s_drv_probe
7523 Thermal Sensor address probe done
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
io scheduler noop registered (default)
PCIe driver version: 7523.0.20210201
PCIe ref clk init.
===EN7523 PCIe init
mtk-pcie 1fa91000.pcie: pcie rc 0 linkup success
mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success

===============PCIe check===tmp_reg=========81014c3===========
mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
PCI: bus2: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit]
pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref]
pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit]
pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0:   bridge window [mem 0x20200000-0x203fffff]

 mt7512_pcie_fixup: 0x1438 = 20000015
 mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12
RC0 Link Traing Result: 10120008
===========RC0 set conf space INTx=============

 mt7512_pcie_fixup: 0x2438 = 20200015
 mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12
RC1 Link Traing Result: 10120008
===========RC1 set conf space INTx=============
ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162
ECNT ring buffer init success
brd: module loaded

SPI Flash Init Start
Found no SPI flash device
IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6)
Set SPI Clock to 50 Mhz
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash :  _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
spi nand flash
tc3162: flash device 0x02000000 at 0x00000000
EN7512 mtd init: spi nand probe enter
[spi_nand_setup] : Enter
nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01
nand: Unknown  _SPI_NAND_DEVICE_ID_F50L1G41LB
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand_scan_ident ok
[spi_nand_setup]: chip size =  0x8000000, erase_shift=0x11
bmt pool size: 81
BMT & BBT Init Success
Creating 11 MTD partitions on "EN7512-SPI_NAND":
0x000000000000-0x000004a00000 : "whole"
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x0000000a0000 : "romfile"
0x0000000a0000-0x0000002a0000 : "misc"
0x0000002a0000-0x000000aa0000 : "kernel"
0x000000aa0000-0x000002500000 : "rootfs"
0x0000002a0000-0x000002500000 : "firmware"
0x000002500000-0x000002d00000 : "kernel_slave"
0x000002d00000-0x000004760000 : "rootfs_slave"
0x000002500000-0x000004760000 : "firmware_slave"
0x0000049e0000-0x000004a00000 : "reserve"

rootfs
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
USB driver version: 7523.3.20210202
port 0 u2_slew_rate_cal_7523
FM_OUT value = 109(0x0000006D)
SR calibration value = 5
port 1 u2_slew_rate_cal_7523
FM_OUT value = 109(0x0000006D)
SR calibration value = 5
xhci-hcd 1fab0000.xhci: xHCI Host Controller
xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1
xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci-hcd 1fab0000.xhci: xHCI Host Controller
xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver cypress_m8
usbserial: USB Serial support registered for DeLorme Earthmate USB
usbserial: USB Serial support registered for HID->COM RS232 Adapter
usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (7503 buckets, 30012 max)
ludewei add module
gre: GRE over IPv4 demultiplexor driver
IPv4 over IPsec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Ebtables v2.0 registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
Registering SWP/SWPB emulation handler
tc3162ser_startup
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Freeing unused kernel memory: 244K
busybox init and set aff
starting pid 439, tty '': '/etc/init.d/rcS'
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directory
usbcore: registered new interface driver usb-storage
insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory
tp_board: loading out-of-tree module taints kernel.
Register flash device: flash0
rcS (439): drop_caches: 3
start XPON related APP
/tmp/cfg_load is not exist,left time 30
svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so
svchost_parse_print_conf: Entry = svc_cfg_main
svchost_parse_print_conf: Param = 111
random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
shm_pool_init: base[20000000]  size[00200000]]
shm_pool_init: Init Done!
random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
svc_cfg_start: ........
Load cfg from file [/var/romfile.cfg] .....
tar: invalid mag[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
ic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use backup romfile to check!
Couldn't open mtd:reservearea!
mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288
Unlocking reservearea ...
Could not open mtd device: reservearea
[BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea
tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
agic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use default romfile to check!
mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432
Unlocking reservearea ...
Could not open mtd device: reservearea
[DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea
tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
agic
tar: short read
cp: can't st[check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
at '/tmp/ctromfile.cfg': No such file or directory
/tmp/cfg_load is not exist,left time 29
Use usrfs romfile to check!
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
ctromfile.cfg

<<call handle_proline_paras>>
mtd[readflash]:device=[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea

 handle_proline_paras 1564 SSID:ChinaNet-AP.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.

 ha[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ndle_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
roline[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
_paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
 1564 [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
WPAPSK[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
:123456[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
78.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.

 handrandom: ubusd: uninitialized urandom read (4 bytes read, 54 bits of entropy available)
le_proli[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ne_pa[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ras 1[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
564 Srandom: ubusd: uninitialized urandom read (4 bytes read, 58 bits of entropy available)
SID:ChinaNet-AP.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.

 handle_proline_paras 1564 WPAPSK:12345678.

 handrandom: ubusd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
le_proline_paras 1564 SSID:ChinaNet-AP.

 handle_proline_paras 1564 WPAPSK:12345678.

 handle_proline_paras 1564 SSID:ChinaNet-AP.

 handle_proline_paras 1564 WPAPSK:12345678.

 handle_proline_paras 1564 web_passwd:1234.

 handle_proline_paras 1564 SerialNumber:FHTT12345678.

parse proline para Password fail.
parse proline para Password fail.
 handle_proline_paras 1564 Mode:GPON.

root.mesh.apclibh.entry.1:BhProfileSsid not found.
root.mesh.apclibh.entry.1:BhProfileWpaPsk not found.
root.mesh.apclibh.entry.2:BhProfileSsid not found.
root.mesh.apclibh.entry.2:BhProfileWpaPsk not found.
 handle_proline_paras 1564 (null):1.
cfg_save_object: open file [/tmp/var/romfile.cfg] fail

----> Load config file fail.
svc_cfg_start: ........ ok [20001030]!
svchost_get_event_val: get param fail [0]
start omci
svchost_prandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available)
arse_print_conrandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available)
f: Path = /lib/random: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available)
libpon_svc.so
svchost_parse_print_conf: Entry = svc_pon_main
svchost_parse_print_conf: Param = 111
svchost_parse_print_conf: Path = /lib/libother_svc.so
svchost_parse_print_conf: Entry = svc_other_main
svchost_parse_print_conf: Param = 111
svchost_parse_print_conf: Path = /lib/libcentral_ctrl_svc.so
svchost_parse_print_conf: Entry = svc_central_ctrl_main
svchost_parse_print_conf: Param = 111
module_sel: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
ecnt_register_cpu_interrupts
random: ubusd: uninitialized urandom read (4 bytes read, 81 bits of entropy available)
svc_pon_int: ...... reg event ok
svc_pon_int: ...... reg method ok
cfg svc load done, 0 ms
[svc_cfg_load_special_random: ubusd: uninitialized urandom read (4 bytes read, 82 bits of entropy available)
info][581]SET [omci_lib_set_max_ports_list] Result=0
CouldTC3162 LED Manager 0.1 init

tcledctrl version: tcledctrl V1.1.0.0 (Jan  9 2025-07:33:29).
nled path:/userfs/7529_62led.conf
't open mtd:reservearea!
svc_other_init: ...... reg event ok
svchost_get_event_val: get param fail [0]
svchost_get_event_val: get param fail [0]
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.cosvc_centrl_ctrl_init: ...... reg event ok
nf
Can't opdev mount  is start!
config
0
en /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
svchost_get_event_val: get param fail [0]
PID=547 event receive pthread_create OK, keep gonlksock_create:nlksock create err:Protocol not supported!
inactive_notify_handler: nlksock_create fail
g......
[svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
mtd[readflash]:detccicmd V1.1.0.0 (Jan  9 2025-07:33:31)
ERROR!Create /etc/fwTCver.conf fail!
vice=reservearea tclen=1 tcoffset=2097152
Unlocking reservearea ...
Could not open mtd device: reservearea
mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][661]SET [oam_lib_set_hardware_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
C
SIFMaster 0.1 init
===== Interface 0 is ON =====

Register sifm cmd
an't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking rrandom: nonblocking pool is initialized
eservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0
(gdump_mode_sel): GDUMP sel has switch to 3
ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:3
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:7
ifc_set_action: cpu:1, nbq:8
TP_User Ecnt ponTime:OMCI Startup
macType = 0
flashQdmaInit = 0x33
netif_napi_add() called with weight 256 on device lan_int2_if
ether.c:v1.00-NAPI 29.Mar.2015
eth0: FE MAC Ethernet address: BC:07:1D:7A:B2:B8
Use Internal switch ,type 10
tcPhyVerLookUp 2446 94A1
 7523 Ge,
, port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9
  GE Rext AnaCal Done! (5)(0x25)
  GE Rext AnaCal Done! (5)(0x25)
  GE R45 AnaCal zcal_idx(before table) (dec: 45) (hex: 0x2d)
  GE R45 AnaCal Done! (cnt:13)(after table) ([7][6:0]:0x51) ([6:0]:0xd1)
  GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b)
  GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6)
  GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b)
  GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6)
  GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
  GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
 GE Tx offset AnaCal Done! (3)(0x22)
 GE Tx offset AnaCal Done! (2)(0x2)
 GE Tx offset AnaCal Done! (8)(0x27)
 GE Tx offset AnaCal Done! (5)(0x24)
 GE Tx amp AnaCal Done! (13) (0x2d)
 GE Tx amp AnaCal Done! (22) (0x36)
 GE Tx amp AnaCal Done! (20) (0x34)
 GE Tx amp AnaCal Done! (14) (0x2e)
 [tcPhyInit] in Unlocking config ...
Could not open mtd device: config
 [tcPhyInit] out , r31 = (9, 0x0)
tcPhyVerLookUp 2446 94A1
 7523 Ge,
, port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9
  GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
  GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
  GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
  GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
  GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
  GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
  GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
  GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
 GE Tx offset AnaCal Done! (2)(0x21)
 GE Tx offset AnaCal Done! (5)(0x24)
 GE Tx offset AnaCal Done! (6)(0x25)
 GE Tx offset AnaCal Done! (2)(0x2)
 GE Tx amp AnaCal Done! (6) (0x26)
 GE Tx amp AnaCal Done! (14) (0x2e)
 GE Tx amp AnaCal Done! (19) (0x33)
 GE Tx amp AnaCal Done! (14) (0x2e)
 [tcPhyInit] in  [tcPhyInit] out , r31 = (10, 0x0)
tcPhyVerLookUp 2446 94A1
 7523 Ge,
, port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9
  GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
  GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
  GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28)
  GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde)
  GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28)
  GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde)
  GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
  GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
 GE Tx offset AnaCal Done! (5)(0x24)
 GE Tx offset AnaCal Done! (2)(0x21)
 GE Tx offset AnaCal Done! (4)(0x23)
 GE Tx offset AnaCal Done! (2)(0x21)
 GE Tx amp AnaCal Done! (4) (0x24)
 GE Tx amp AnaCal Done! (9) (0x29)
 GE Tx amp AnaCal Done! (18) (0x32)
 GE Tx amp AnaCal Done! (7) (0x27)
 [tcPhyInit] in  [tcPhyInit] out , r31 = (11, 0x0)
tcPhyVerLookUp 2446 94A1
 7523 Ge,
, port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9
  GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b)
  GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6)
  GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
  GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
  GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
  GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
  GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b)
  GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6)
 GE Tx offset AnaCal Done! (5)(0x24)
 GE Tx offset AnaCal Done! (8)(0x27)
 GE Tx offset AnaCal Done! (2)(0x21)
 GE Tx offset AnaCal Done! (3)(0x3)
 GE Tx amp AnaCal Done! (1) (0x21)
 GE Tx amp AnaCal Done! (9) (0x29)
 GE Tx amp AnaCal Done! (7) (0x27)
 GE Tx amp AnaCal Done! (16) (0x30)
 [tcPhyInit] in  [tcPhyInit] out , r31 = (12, 0x0)
mount: can'not found str : MAP, erase and mount again
t find /dev_mount is ok
eth0: starting interface.
netif_start_queue
dev/mtdblock in /etc/fstab
macType = 0
flashQdmaInit = 0x33
fe resource init start
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
Ralink HW NAT Module Enabled
you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h                  when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512
HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384
IP check use Black List
EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw
[c0514268]isForceToCpu=0:0
copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xe0f00000
copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xe0b80000
[C0]core freq at 333000000 Hz
[C0]timer_init: Timer clk is running at 125 Mhz
[C0]wcid_counter_init:0
[C0]wcid_counter_init:1
[C0][NPU] ba_node_init...
[C0]baNode_array_init
[C0]counter_init:2
[C0][NPU] queue_mutex_init...
[C0]qdma_init
[C1]core1_main
[C2]timer_isr  Store Value 1e903000, val[C2]core2_main
[C3]core3_main
[C3]do npu_enq_deq_init
[c0514244]npu_pkt_buf_addr=9ddf1fc0
npu_wifi_offload_get_pkt_buf_addr=9ddf1fc0
[c0514244]npu_pkt_buf_addr=9ddf1fc0
[C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=9ddf1fc0, 9ddf1fc0
npu_wifi_offload_get_force_to_cpu_flag=0
isForceToCpu=0
[C0](core0_main) just return, because QDMA driver for ARM is not ready
mt_whnat: Unknown symbol glb_var_wed_ring (err 0)
mt_whnat: Unknown symbol hc_get_chip_ops (err 0)
mt_whnat: Unknown symbol mt_wlan_hook_unregister (err 0)
mt_whnat: Unknown symbol glb_var_wdma_ring (err 0)
mt_whnat: Unknown symbol mt_wlan_hook_register (err 0)
mt_whnat: Unknown symbol hc_get_hif_ctrl (err 0)
mt_whnat: Unknown symbol glb_var_whnat_fbuf (err 0)
mt_whnat: Unknown symbol wlan_operate_get_frag_thld (err 0)
mt_whnat: Unknown symbol hc_get_chip_tx_token_nums (err 0)
mt_whnat: Unknown symbol hc_get_chip_sw_tx_token_nums (err 0)
insmod: can't insert '/lib/modules/mt_whnat.ko': unknown symbol in module, or unknown parameter
tso_lan: tso_v2.c [201]: dscpDmaAddr =9ad20000
tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0
tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0
tso_proc_init.
val_string:add v4 - 445 - -

dport:0, sport:445, daddr:0, saddr:0
---- 7570_bob.conf ----
---- cp -f /etc/7570_bob.conf /tmp/ ----
do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=7d data[1]=04 data[2]=bb data[3]=04
do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success!
---- flashtool readflashtobob ----


______ XPON_PHY init ______
little endian
NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0
xPON PHY initialization done
E3 patched
EN7571 found!
FLASH matrix got
PWRADC offset = 0x34be
PWRADC ready
BG 1.76V = 0x289
BG 0.875V = 0x141
RSSI_Vref = 0x214
RSSI_V = 0x2a0
eFuse value = 0xfd
eFuse offset = 0.9'C
Start GPON Tx Calibration
CDR disabled
RGS_T0C = 0x4c
RGS_T1C = 0x50
CDR enabled
APD initialization done
en7571_reg_init
Initial current loaded
PWR/ER loaded
TIASD = 0x2e
Rx LOS is set
Internal DDMI Enabled
KT Enabled
EN7571 Initialization Done!
PON PHY driver version is 2100825.116.11
xPON driver initialization
Alloc data struct memory successful, 36508
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
VoIPBasic_Commo
[1970-1-1 Thu 00:00:12.892911]omci start!
XPON Mapping Module init OK!
n SIPPr
[1970-1-1 Thu 00:00:12.900127]main gponOmciCmsgsrvInit
ot
[1970-1-1 Thu 00:00:12.905810]OMCI wait for DM init...
ocol is SIP
prevSipStatus: 0, curSipStatus: 0
voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0
vtag_drv_init

tc_multiwan version: tcsmux V1.1.0.0 (Jan  9 2025-07:33:33).
pon_vlan_init

Multi Lan port

 initilize xpon igmp module....done!
pon_mac_filter_init

Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon_multicast.ko': No such file or directory

device eth0 entered promiscuous mode
device eth0.1 is not a slave of br0
device eth0.2 is not a slave of br0
device eth0.3 is not a slave of br0
device eth0.4 is not a slave of br0
device eth0 is already a member of a bridge; can't enslave it to bridge br0.
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
device eth0.1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
device eth0.2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
device eth0.3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready
device eth0.4 entered promiscuous mode
ifconfig: ioctl 0x8913 failed: No such device
interface eth0.5 does not exist!
insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory
insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory
insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory
insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory
ifconfig: SIOCSIFMTU: Invalid argument
ifconfig: SIOCSIFMTU: Novlan tag restore switch : enable
 such device
insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory
start ponmgr_cfg
MTK DSP support
rcS (439): drop_caches: 3
rcS.sdk init done!
creat_domain_proc  ok
tp_domain init ok
device recognition register success
status:
DSPCore[Ver:TVB1.0.23.800-1]
[1] PCM V2.4 (Jun 29 2021 03:11:21)
bind irq-113 to CPU1
PCM_INT=28
pcm[Ver:TVB1.0.23.800-1]
lec[Ver:TVB1.0.23.800-1]
SYS_HCLK=250
Major Num:233, device: spi
spi[Ver:TVB1.0.23.800-1]
[14.529][cos]  415 - ERROR: before cpu mask 00000003
[14.529][cos]  430 - ERROR: after cpu mask 00000001
========fxs3 init start========
========fxs3 init complete========
.
init mod-slic3
slic3[Ver:TVB1.0.23.800-1]
mode=
ISI
init mod-ksocket
ksocket[Ver:TVB1.0.23.800-1]
ortp[Ver:TVB1.0.23.800-1]
monitor value xxxxxxx
init mod-acodec
acodec[Ver:TVB1.0.23.800-1]
ponTime:ONU Ready
init mod-foip3
foip3[Ver:TVB1.0.23.800-1]
Interface name length cannot exceed 15 characters.
Interface name length cannot exceed 15 characters.

Silabs SLIC type selected by SW makefile compile option

[4294938864][slic][INFO][gpio_clocksrc_init:L2399]ISI
[4294938865][spi][INFO][SPI_Reset:L473]
 SPI_Reset 2
[15.752][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml

slic deviceVerify ProSLIC_Version 9.1.0

Silabs SLIC Reset
REG_0  = 0xaa ,device[0], Part_num 0x5, Revision 0x2
device[0]:deviceVerify Success!

SPI Reset times:1
pcm1 ch num:1 pcm2 ch num:0
fxs[Ver:TVB1.0.23.800-1]
[fxs_init_action](1344)noinit=0
pcm1 ch num:1 pcm2 ch num:0
Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1)
deviceInit on DeviceId = 0
ProSLIC_createControlInterface = 0
ProSLIC_createDevice = 0
get_start_chanid=0
ProSLIC_createChannel = 0
ProSLIC_SWInitChan = 0
device [0] chanPvt[0].chanType 1
device [0] chanPvt[0].chipType 6
Si3218x_Init_with_Options(640) size = 1 init_opt = 0
SiVoice: Channel 0: Type = PROSLIC Rev = 2
ProSLIC:loading patch: 06302015
.
Si3218x: Channel 0 : VBAT Up = 58.849 v
ProSLIC:Starting LB Cal on channel 0
.init mod-vdsp for 1 channels 2 sessions
vdsp[Ver:TVB1.0.23.800-1]

===============================
|| MTK DSP init successfully ||
===============================

pid 2's current affinity mask: 3
pid 882's current affinity mask: 1
___ COUNTRY SETTING ___
ring_idx : 0
 imp_idx : 0

ProSLIC:PCMStart
slic_set_gainLv - fffffffa / 0
pid 882's new affinity mask: 2
fxsSetLine[0]state 0x9 State UNKNOWN !
pid 2's current affinity mask: 3
pid 2's current affinity mask: 3
pid 2's current affinity mask: 3
pid 1090Dump SLIC[0] register:
'=================================
    00 01 02 03 04 05 06 07 08 09
=================================
s00: aa 00 00 1f 00 40 00 a2 e5 ff
10: 25 13 00 00 00 20 00 00 00 00
20: 00 00 00 02 00 00 00 00 00 00
30: 11 00 00 10 00 00 00 02 00 40
40: 1f 00 7d 00 00 59 04 10 66 00
50: 00 00 00 00 00 00 00 00 ff 00
60: 00 00 e4 00 00 00 00 00  f0 00
70: 00 00 00 00 00 00 02 00 00 00
80: 3f 01 b7 03 af 05 0e 0f ed 10
90: 40 07 9f 06 c1 11 24 05 80 05
100:c 00 01 00 00 00 00 00 00 00 00
110: 00 00 47 01 a9 00 02 ff 38 00
120: 87 05 87 05 00 20 03 00
=================================
urrenwrite address(47) value : 0x8
t affinity mask: 1
pid 1090's new affinity mask: 2
rcS (439): drop_caches: 3
rcS init done!

Please press Enter to activate this console. TC3162 hardware watchdog initialized
cpu 1
cpu 0
sleep 90s!
[20.180][cmm] 5547 - ERROR: Read config index:3

[20.315][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002
[20
 xpon_phy NOT start yet!! [pon_phy_set_api_dispatch:1404] gpPhyPriv->is_phy_start = 0
Disable GPON ONU
.318][cos]  642 - ERROR: Disable gpon driver before true SN set

[20.331][cos]  246 - ERROR: COS wait for OMCI init...


[1970-1-1 Thu 00:00:21.10120]DM init use 8 seconds!

[1970-1-1 Thu 00:00:21.15512][main][1127]:Enter OMCI State Machine, OMCI_STATE_START!

[1970-1-1 Thu 00:00:21.167189][omciAddVendorMeToStdMeTable][1142] before DM operation ,totalSize(2)
[ omciAddVen
[1970-1-1 Thu 00:00:21.217436][omciAddVendorMeToStdMeTable][1193] toalTblSize(2) a/b (0)
dorMeToStdM
[1970-1-1 Thu 00:00:21.226433] initFilterMeInfo toalTblSize = 3
eTable ] 1159
[1970-1-1 Thu 00:00:21.233431][main][1145]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE!
:  1#1
[
[1970-1-1 Thu 00:00:21.244536]Cannot open file "/tmp/olt_mode_param"
omc
[1970-1-1 Thu 00:00:21.251154][omciInitCapability][540] omciInitCapability In
iAddVe
[1970-1-1 Thu 00:00:21.258879]pPortList(48,248,47,47,47,47,32)
ndorMe
[1970-1-1 Thu 00:00:21.265172]pPort(48)
ToS
[1970-1-1 Thu 00:00:21.269245]pPort(248)
tdM
[1970-1-1 Thu 00:00:21.273461]pPort(47)
eTab
[1970-1-1 Thu 00:00:21.277634]pPort(47)
le ]
[1970-1-1 Thu 00:00:21.281736]pPort(47)
 116
[1970-1-1 Thu 00:00:21.285967]pPort(47)
3:
[1970-1-1 Thu 00:00:21.289935]pPort(32)
 2#1,1
[ omciAddVendorMeToStdMeTable ] 1159:  1#2
[ omciAddVendorMeToStdMeTable ] 1163:  2#2,1

[1970-1-1 Thu 00:00:21.314401][omciInitCapability][636] getNext Dev2 currGponAuthObj SN(54504C471D7AB2B8),SNtype(1)

[1970-1-1 Thu 00:00:21.325547][omciInitCapability][683] currOmciCapObj.vendorId IS (TPLG)

[1970-1-1 Thu 00:00:21.334257]read_flash:read In - 8 bytes in 77463552

[1970-1-1 Thu 00:00:21.341520]read_flash:read In - 8 bytes in 77463552

[1970-1-1 Thu 00:00:21.362874]Cannot open file "/tmp/olt_mode_param"

[1970-1-1 Thu 00:00:21.369519]read_flash:read In - 512 bytes in 2752512

[1970-1-1 Thu 00:00:21.376994]Cannot open file "/tmp/olt_mode_param"

[1970-1-1 Thu 00:00:21.383490]read_flash:read In - 512 bytes in 38797312
svchost_get_event_val: get param fail [0]

[1970-1-1 Thu 00:00:21.404770]do not config omci intance by file info
ctromfile.cfg

[1970-1-1 Thu 00:00:21.433369][main][1155]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT!
sh: /bin/mv: not found
set olt type: 0
ponTime:Connection Start
working_mode: 1
[42949394420ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0
C[42949394430ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1
[42949394440ms][phy_init.c:1946] PON PHY scu_reset_init mode=1
ouldn't open image file: /tmp/tc_sto[42949394450ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1
re_romfile.conf!

[1970-1-1 Thu 00:00:21.505483][main][1183]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN!
Unlocking reservearea ...
Could not open mtd device: reservearea
Couldn't open image file: /tmp/tc_store_romfile.conf!
[22.350][cos]  252 - ERROR: OMCI init use 2 seconds!

===========>manufacture:0, ISPflag:0
ioctl: No such device
ifconfig: SIOCSIFHWADDR: No such device
IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br0: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
device eth0.1 entered promiscuous mode
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
ifconfig: ioctl 0x8913 failed: No such device
sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory
interface eth0.5 does not exist!
sendto: No such file or directory
line(593) Msg.type(2014) pid(852) errno(2) ret(-1)
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
[25.160][cos]  121 - ERROR: CQC:tm_start:25, tm_end:25
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config

[27.170][cos]  121 - ERROR: CQC:tm_start:25, tm_end:27
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config

[29.180][cos]  121 - ERROR: CQC:tm_start:25, tm_end:29
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config

[31.190][cos]  121 - ERROR: CQC:tm_start:25, tm_end:31
[31.190][cos]  137 - ERROR: CQC:FAILED!
[31.190][cos]  702 - ERROR: Expire time!
device eth0.1 left promiscuous mode
br_agc: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br_agc: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br_agc: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br_agc: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
[31.468][cmm]  591: num of CPU core = 2.
[31.468][cmm]  601: parent pid 852
[31.470][cmm] 6195 - ERROR: read oemID from flash :FB2096B95D3F0E7340FD9A6AA2E93C18
[31.470][cmm] 6257 - ERROR: read zone from flash :BR
[31.479][cmm] 6195 - ERROR: read oemID from flash :FB2096B95D3F0E7340FD9A6AA2E93C18
[31.480][cmm] 6257 - ERROR: read zone from flash :BR
[31.512][cmm] 1443 - ERROR: set serialNumber to gponsn 54504C471D7AB2B8
[31.592][cmm]  608: start creating dropbear RSA key at CPU core 1.
[31.592][cmm]  618: child pre cpu mask 00000001
[31.593][cmm]  632: child post cpu mask 00000002
[31.593][cmm]  636: Try create dropbear RSA key loop=0 ...
Generating 2048 bit rsa key, this may take a while...
ip6tables: No chain/target/match by that name.
[31.892][cmm] 3192 - ERROR: Open TZ file error!
[32.117][cwmp]  528 - ERROR: Set socket opt error.
killall: dnsmasq: no process killed
[32.242][cmm]  158 - WARN: Empty DNSServer()
[32.393][cmm]  158 - WARN: Empty DNSServer()
[32.405][cmm]  158 - WARN: Empty DNSServer()
[32.413][cmm]  158 - WARN: Empty DNSServer()
ip6tables: Bad rule (does a matching rule exist in that chain?).
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
NTP server list:
iptables: Bad rule (does a matching rule exist in that chain?).
ifconfig: SIOCSIFHWADDR: Cannot assign requested address
bridge name br0 has exist
bridge name br0 has exist
device br0 already exists; can't create bridge with the same name
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
done
[32.742][cmm]  203 - ERROR: ifName is eth0, vid is 5
[32.763][cmm]  203 - ERROR: ifName is eth0, vid is 4
vconfig: ioctl error for add: File exists
[32.776][cmm]  203 - ERROR: ifName is eth0, vid is 3
vconfig: ioctl error for add: File exists
[32.789][cmm]  203 - ERROR: ifName is eth0, vid is 2
vconfig: ioctl error for add: File exists
[32.802][cmm]  203 - ERROR: ifName is eth0, vid is 1
vconfig: ioctl error for add: File exists
[32.815][cmm]  203 - ERROR: ifName is eth0, vid is 0
sh: can't create /proc/tplink/eth_vlan: nonexistent directory
device eth0.1 entered promiscuous mode
[32.953][cmm]  284 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName:

Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[32.987][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
iptables: Bad rule (does a matching rule exist in that chain?).
device eth0.2 entered promiscuous mode
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[33.056][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
device eth0.3 entered promiscuous mode
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[33.123][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
br0: port 1(eth0.1) entered disabled state
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
br0: port 2(eth0.2) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
br0: port 3(eth0.3) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 is not a slave of br0
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
device eth0.1 entered promiscuous mode
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
device eth0.5 is not a slave of br0
device eth0.4 is already a member of a bridge; can't enslave it to bridge br0.
device eth0.4 is already a member of a bridge; can't enslave it to bridge br0.
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[33.594][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
[33.621][cmm]  159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public
[33.622][cmm]  169 - ERROR: 2.4GHz radio has created the public apObj, go next.
[33.622][cmm]  159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public
[33.622][cmm]  169 - ERROR: 5GHz radio has created the public apObj, go next.
[33.623][cmm] 2021 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
[35.355][cmm]  648: create dropbear RSA key success.
[35.356][cmm]  655: start creating dropbear DSS key at CPU core 1.
[35.356][cmm]  659: Try create dropbear DSS key loop=0 ...
Generating 1024 bit dss key, this may take a while...
WiFi@C12L1,get_dbg_setting_by_profile() 4428: debug level setting=INDEX0_debug_level not found!!
WiFi@C12L1,get_dbg_setting_by_profile() 4451: debug option setting=INDEX0_debug_option not found!!
pci 0000:00:00.0: enabling device (0140 -> 0142)
mt_pci_slave 0000:01:00.0: enabling device (0140 -> 0142)
!!HIF_RX_EVENT Only
pci 0000:00:01.0: enabling device (0140 -> 0142)
rtpci 0000:02:00.0: enabling device (0140 -> 0142)

npu_offload_mapping     upcount=2
npu_offload_mapping     PCIE_FUNCTION_MAX_NUM=10npu_offload_mapping     chipid=790a

=========retvalue=790a14c3=========
=========chipid=790a=========
npu_offload_mapping  EcntPciePortTypeMask=8
mt7916_init()-->
Use the default iPAiLNA bin image!
<--mt7916_init()
RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128!
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX1
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX2
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX3
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX4
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX5
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX6
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX7
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX8
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX9
WiFi@C12L2,match_index_by_chipname() 518: Not find slot id, back to old rule.
msta_ifname not found
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
whnat_module_init(): module init and register callback for whnat
create whnat_ctrl ok!!!
wed_slot_map_get(): assign slot_id:0 for entry: 0!
wed_slot_map_get(): assign slot_id:1 for entry: 1!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
msta_ifname not found
whnat_cap_support(): chip_id=7906 is in WHNAT support list
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1
wed_init(1): irq=91,base_addr=0xe56fe000
wed_ring_init(): wed ring init result = 0
whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]
create wed ok!!!
wdma_init(): wdma(1) base addr=e584a400
wdma_init(): wdma(1) irq[0]=87
wdma_init(): wdma(1) irq[1]=88
wdma_init(): wdma(1) irq[2]=89
wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_probe(): probe fail since whnat is full!
whnat_dev0: probe of 1fa02000.wed2 failed with error -1
WiFi@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE
WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space
WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space
WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail!
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS0 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS1 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS2 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS3 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS4 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS5 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS6 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS7 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS8 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS9 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS10 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS11 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS12 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS13 PhyMode=177
WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=0, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=1, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=2, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=3, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=4, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=5, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=6, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=7, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=8, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=9, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=10, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=11, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=12, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=13, Desired MFPC=0
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
DriverModel=2
!!!! do phy and virtual address mapping
dramBaEntry_pa=94c00000
PciePortType=3
after :phy_add= 20000000,ring_idx=2
[C0][NPU] npu_set_pcie_base, addr=200d4540, band_idx=0
[C0][npu_set_pcie_base] 2.4G pcieBase 200d4540 mem_base 200d4540, hw_rx_desc=0
after :phy_add= 20200000,ring_idx=0
[C0][NPU] npu_set_pcie_base, addr=202d8550, band_idx=1
[C0][npu_set_pcie_base] 5G pcieBase 202d8550 mem_base 202d8550, hw_rx_desc=0
[C0][NPU] npu_init...
[C0]=======================
[C0]NPU Version: MT7916_NPU_V1.001.testv2
[C0]=======================
[C0]Support NPU Wifi ffload
[C0][NPU]  pkt_queue_init...
[C0]counter_init:1
[C0][NPU] Enter npu_npu_init_rxd_5G, band_idx=1, rx_ring_size=1536
WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000
AllocSize 6000 AllocVa e586e000,  .AllocPa 1e800000
[C0][NPU] npu_init...
[C0]=======================
[C0]NPU Version: MT7916_NPU_V1.001.testv2
[C0]=======================
[C0]Support NPU Wifi ffload
[C0][NPU]  pkt_queue_init...
[C0]counter_init:0
[C0][NPU] Enter(2.4G) npu_npu_init_rxd, band_idx=0, rx_ring_size=1536
WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020
AllocSize 6000 AllocVa e5872020,  .AllocPa 1e806020
register rx data done task d7cf1954
register rx data done task d734d954
register rx data done task d734d954
=====>register 2G
hostdapt_registe_wifitask 0
register rx data done task d734d954
=====>register 5G
hostdapt_registe_wifitask 1
wdma_dma_ctrl(): WDMA_GLO_CFG=40000450
=========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000
using E1 ROM patch
using E1 RAM
current sync CR = 0x1
        Built date: 20230825174652a

        Platform: ALPS
        HW/SW version: 0x8a108a10
        Patch version: 0xffffffff
current sync CR = 0x1
        Chip ID: 0x13
        Eco version: 0x00
        Region number: 0x09
        Format version: 0x02
        Format flag: 0x01
        Ram version: ____000000
        Built date: 20230825174715
        Common crc: 0x5b89c7db
        Release info: header tag = 0, total length = 80
        tag 1, padding length = 1, tag length = 75
        payload: t-neptune-main-2111-7916-imp-MT7916_E1_ASIC_ROM_RAM_REBB_IMP-20230825174602
        Chip ID: 0x00
        Eco version: 0x00
        Region number: 0x03
        Format version: 0x02
        Format flag: 0x01
        Ram version: DEV_000000
        Built date: 20230825174802
        Common crc: 0x7e5821c5
        Release info: header tag = 0, total length = 0
current sync CR = 0x7
efuse_probe: efuse = 100002
flash_read(): read from address:0x120000, len:0x1000!
WiFi@C02L1,is_cal_free_ic() 749: [a-die version:1]
[38.724][cmm]  671: create dropbear DSS key success.
[38.724][cmm]  680: parent pid 852
[38.724][cmm]  688: parent pre cpu mask 00000001
[38.725][cmm]  702: parent post cpu mask 00000003
WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
WiFi@C01L1,AntCfgInit() 3098: Not support for HIF_MT yet!
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku_2g.dat
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku_5g.dat
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku-bf_2g.dat
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku-bf_5g.dat
WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
WiFi@C12L1,SCS_init() 880: INIT SCSEnable [0]= 0
WiFi@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,red_tail_drop_init() 83: red_tail_drop_init: available token:7680, whnat_en:1
WiFi@C00L1,MtCmdCr4RedSet() 917: MtCmdCr4RedSet: (ret = 0)
WiFi@C00L1,SendRedCmd() 1052: SendRedCmd:(ret = 1)
jiffies=ffff9aac, POLLING_MODE_DETECT_INTV=300

==ecnt_wifi_rx_rps_hook===
WiFi@C01L2,RTMP_COM_IoctlHandle() 1482:  -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 0
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](0): get wdev_op_lock.
WiFi@C00L3,BuildChannelList() 518: BandIdx = 0, PhyMode = 78, ChListNum = 13:
WiFi@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G.
WiFi@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=1, band_bw[band_idx]=0
phy_freq_adjust : no prim_ch value for adjust!
WiFi@C23L1,operate_loader_phy() 395: phy_freq_adjust failed!
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId0 = bc:07:1d:7a:b2:b8
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock.
WiFi@C23L1,HcGetBandByChannel() 1056: No hdev parking on channel:0, just return a default band_idx 0!
WiFi@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=0 RadioOn
mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
WiFi@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x21c/0x4d4 [mt7916_ap])!!
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=1, ctrl_ch2=0, cent_ch=1 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=1, ctrl_ch2=0, cent_ch=1, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=6, ctrl_ch2=0, cent_ch=6, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=7, ctrl_ch2=0, cent_ch=7, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=8, ctrl_ch2=0, cent_ch=8, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=9, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=10, ctrl_ch2=0, cent_ch=10, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=11, ctrl_ch2=0, cent_ch=11, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2f8/0x4d4 [mt7916_ap])!!
WiFi@C23L3,SelectClearChannelBusyTime() 1864: ====================================================================
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   1 : Busy Time =  12964, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   2 : Busy Time =  13604, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   3 : Busy Time =  19376, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   4 : Busy Time =  13557, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   5 : Busy Time =   7961, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   6 : Busy Time =   6236, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   7 : Busy Time =  16395, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   8 : Busy Time =  12519, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel   9 : Busy Time =  15526, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel  10 : Busy Time =  13683, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel  11 : Busy Time =  13301, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1873: ====================================================================
WiFi@C23L3,SelectClearChannelBusyTime() 2143: Rule 3 Channel Busy time value : Select Primary Channel 6
WiFi@C23L3,SelectClearChannelBusyTime() 2145: Rule 3 Channel Busy time value : Min Channel Busy = 6236
WiFi@C23L3,SelectClearChannelBusyTime() 2150: Rule 3 Channel Busy time value : BW = 20
WiFi@C23L3,SelectClearChannelBusyTime() 2189: [SelectClearChannelBusyTime] - band0 END
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=6, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=6, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0)
WiFi@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G.
WiFi@C23L3,zero_wait_dfs_switch_ch() 823: outband ch 0, ch_stat 0
WiFi@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:0, CfgMode:0
WiFi@C15L2,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(0)
WiFi@C01L3,wifi_sys_linkup() 1155: wdev idx = 0
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](0): get wdev_op_lock.
WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0
WiFi@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 0 (ra0)
WiFi@C08L3,UpdateBeaconHandler() 1915:  Band0 BcnInitedRnd = 35
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](0): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
Set_Map_Proc current MAP MODE is 0
Set_MapR2_Proc MAP R2 is already disabled
Set_Bh_Bss_Proc ra0 bandIdx = 0 ,DevOwnRole 0x20
Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x0
Set_Fh_Bss_Proc ra4 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Bss_Proc ra4 bandIdx = 0 ,DevOwnRole 0x44
Set_Fh_Bss_Proc ra5 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Bss_Proc ra5 bandIdx = 0 ,DevOwnRole 0x48
Set_Fh_Bss_Proc ra6 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Sta_Proc apcli0 wdev->MAPCfg.DevOwnRole 0x0
7906@C01L2,RTMP_COM_IoctlHandle() 1493:  -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN
WiFi@C08L2,ap_link_down() 7195: (caller:ap_inf_close+0x58/0x170 [mt7916_ap]), wdev(0)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:2, caller:ap_link_down+0x7c/0x130 [mt7916_ap])!!
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 0
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](0): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=0
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](0): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 0
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](0): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=0
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock.
7906@C01L2,RTMP_COM_IoctlHandle() 1516: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT
7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
7906@C13L0,MacTableDeleteEntry() 1655: (caller:MacTableResetWdev+0xac/0x24c [mt7916_ap]): wcid 0 =====
7906@C01L3,wifi_sys_disconn_act() 991:  wdev_idx=0
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_disconn_act+0x64/0x2e8 [mt7916_ap](0): get wdev_op_lock.
7906@C08L3,wifi_sys_op_unlock() 813: wifi_sys_disconn_act+0x8c/0x2e8 [mt7916_ap](0): release wdev_op_lock.
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(0)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(1) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(1)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(2) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(2)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(3) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(3)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(4) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(4)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(5) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(5)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(6) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(6)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(7) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(7)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(8) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(8)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(9) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(9)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(10) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(10)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(11) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(11)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(12) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(12)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(13) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!!
WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(13)
current sync CR = 0x7
current sync CR = 0x7
current sync CR = 0x7
current sync CR = 0x7
current sync CR = 0x7
current sync CR = 0x1
7906@C04L1,RT28xxPciAsicRadioOff() 144: Not support for HIF_MT yet!
7906@C00L1,RTMPDrvClose() 1120: call RT28xxPciAsicRadioOff fail !!
whnat_ring_exit(): cookie=e5981000
unregister rx data done task d7cf1954
=====>unregister 5G
hostdapt_registe_wifitask 1
unregister rx data done task d734d954
=====>unregister 2G
hostdapt_registe_wifitask 0
[Nop_List_Backup] NopList Channel count:0 <----
wifi_chip_remove(): Chang WED IRQ: 91 to CHIP IRQ: 83
wed_ser_task(): wed_ser exist, wed->irq=91!
whnat_remove(): whnat remove done!!
whnat_driver_exit(): whnat entry clear done!!
Set_Cmm_WirelessMode_Proc, wdev =e5d1eb68,wdev(0) wdev->if_up_down_state =0 bss not ready(state:0, caller:RTMPAPPrivIoctlSet+0x1e4/0x388 [mt7916_ap])!!
7906@C12L1,Set_Cmm_WirelessMode_Proc() 856: Set_WirelessMode_Proc::parameters out of range
Interface doesn't accept private ioctl...
set (8BE2): Network is down
7906@C12L1,Set_VhtBw_Proc() 9718: (error Channel = 0)
Interface dowlan_operate_get_prim_ch: op NULL
wlan_operate_get_bw: op NULL
esn't accept private ioctl...
set (8BE2): Invalid argument
7906@C12L1,Set_HtExtcha_Proc() 8396: ra0 interface is down, Set_HtExtcha_Proc() return!!!
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
7906@C12L1,RTMPAPPrivIoctlSet() 3676: IOCTL::(iwpriv) Command not Support [EDCCAEnable=0]
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 9f
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 38
7906@C00L1,MtCmdSetVoWFeatureCtrl() 7832: (rty = 0)
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 38
7906@C00L1,MtCmdSetVoWFeatureCtrl() 7832: (rty = 1)
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 38
7906@C00L1,MtCmdSetVoWFeatureCtrl() 7832: (rty = 2)
set_vow_airtime_fairness_en: set 0.
7906@C00L1,set_vow_airtime_fairness_en() 2331: set command failed.
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 36
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 36
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 36
set_vow_dwrr_max_wait_time: set 1.
7906@C00L1,set_vow_dwrr_max_wait_time() 2991: set command failed.
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
SetPercentageCtrl: ucBandIdx = 0
SetPercentageCtrl: TxPowerPercentEn = 1
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 58
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
SetPowerDropCtrl: ucPowerDrop = 100
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 58
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:Set_BeaconPeriod_Proc+0xbc/0x200 [mt7916_ap])!!
Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:Set_DtimPeriod_Proc+0x170/0x268 [mt7916_ap])!!
interface is down, return!!!
7906@C12L3,Set_DtimPeriod_Proc() 16125: (DtimPeriod=1)
Interface doesn't accept private ioctl...
set (8BE2): Network is down
can't add ra5 to bridge br0: Invalid argument
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[45.565][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
can't add ra4 to bridge br0: Invalid argument
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[45.607][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
can't add ra3 to bridge br0: Invalid argument
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[45.648][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
can't add ra2 to bridge br0: Invalid argument
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[45.690][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
can't add ra1 to bridge br0: Invalid argument
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[45.732][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
device ra0 entered promiscuous mode
device apcli0 entered promiscuous mode
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[45.801][ipv6]  981 - WARN: Could not find pid of dibbler-server with interface name is br0!
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23
WLAN-Start wlNetlinkTool
Waiting for Wireless Events from interfaces...
swWlSetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 60
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
a7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23
nChkAhbErr: netlink to do
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 40
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 20
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23
SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1
SetThermalProtectEnable(): trigger_temp: 119, restore_temp: 114, recheck_time: 1000
7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23
7906@C08L2,mbss_virtual_if_open() 134:  ===> rai0
7906@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
msta_ifname not found
whnat_cap_support(): chip_id=7906 is in WHNAT support list
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1
wed_init(1): irq=91,base_addr=0xe6e86000
wed_ring_init(): wed ring init result = 0
create wed ok!!!
wdma_init(): wdma(1) base addr=e6eba400
wdma_init(): wdma(1) irq[0]=87
wdma_init(): wdma(1) irq[1]=88
wdma_init(): wdma(1) irq[2]=89
wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_probe(): probe fail since whnat is full!
whnat_dev1: probe of 1fa02000.wed2 failed with error -1
7906@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE
WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space
WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space
WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail!
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS0 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS1 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS2 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS3 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS4 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS5 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS6 PhyMode=78
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS7 PhyMode=177
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS8 PhyMode=177
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS9 PhyMode=177
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS10 PhyMode=177
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS11 PhyMode=177
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS12 PhyMode=177
7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS13 PhyMode=177
7906@C23L3,auto_ch_select_set_cfg() 3508: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
7906@C23L3,auto_ch_select_set_cfg() 3508: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
7906@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
7906@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
7906@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=0, Desired MFPC=0

``` EN7523DRAMC V0.6 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1e, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=512MB U-Boot 2014.04-rc1 (Jan 09 2025 - 07:27:55) DRAM: 496 MiB EN7529CT Now running in RAM - U-Boot at: 9edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:9ee3d9d8 Net: ecnt_eth Uip activated use flash mac: BC: 7:1D:7A:B2:B8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: bc:07:1d:7a:b2:b8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 279: hw ver: XX530v v1.0 00000001 [ os_initCPEInfo ] 280: sw ver: 0.5.0 3.0.0 v6096 [ os_initCPEInfo ] 287: sn: 22515X8006387 [ os_initCPEInfo ] 290: pin: 70041675 [ os_initCPEInfo ] 297: endian: 0 [ os_initCPEInfo ] 300: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 0 Boot flag csum incorrect, return image0 Prepare to boot image0 Boot flag csum incorrect, return image0 bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'kernel@1' kernel subimage Description: ECONET Linux kernel Type: Kernel Image Compression: lzma compressed Data Start: 0x818022a4 Data Size: 2602809 Bytes = 2.5 MiB Architecture: ARM OS: Linux Load Address: 0x80088000 Entry Point: 0x80088000 Hash algo: sha1 Hash value: c0ce34b56f1492e563f4555d788913627dbecd8f ## Loading fdt from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: ECONET Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x818002fc Data Size: 7913 Bytes = 7.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24 Booting using the fdt blob at 0x818002fc Uncompressing Kernel Image ... OK Loading Device Tree to 9cdf2000, end 9cdf6ee8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.115 (compile@3afbd4ef4a54) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Thu Jan 9 07:30:07 UTC 2025 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: econet,en7523 bootconsole [uart0] enabled Memory policy: Data cache writealloc psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. [c05142b8]npu_pkt_buf_addr=9ddf1fc0:9ddf1fc0 npu_pkt_buffer memblock_alloc:9ddf1fc0,buf_size=1600000 PERCPU: Embedded 12 pages/cpu @dddd7000 s18048 r8192 d22912 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129728 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=BC:07:1D:7A:B2:B8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 480204K/523008K available (4796K kernel code, 168K rwdata, 1548K rodata, 244K init, 638K bss, 42804K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0088000 - 0xc06ba468 (6346 kB) .init : 0xc06bb000 - 0xc06f8000 ( 244 kB) .data : 0xc06f8000 - 0xc0722140 ( 169 kB) .bss : 0xc0725000 - 0xc07c4be0 ( 639 kB) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:64 nr_irqs:64 64 CPU0: found redistributor 0 region 0:0x09080000 Architected cp15 timer(s) running at 25.00MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 40ns console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80088280 - 0x800882d8 CPU1: found redistributor 1 region 0:0x090a0000 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (100.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. l2c_sram_size:0x0 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = dd577800 ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available sgmii probe init start sgmii:int_name: sgmii_pcie0 sgmii:int_id: 0 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= e087c100 sgmii:sgmii->pcs2_base= e087ea00 sgmii:sgmii->an_base= e0944000 sgmii:sgmii->ra_base= e0946600 sgmii:sgmii->phya_base= e0948c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=e087ea20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_pcie1 sgmii:int_id: 1 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= e094a100 sgmii:sgmii->pcs2_base= e094ca00 sgmii:sgmii->an_base= e094e000 sgmii:sgmii->ra_base= e0950600 sgmii:sgmii->phya_base= e0952c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=e094ca20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_usb0 sgmii:int_id: 2 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= e0954100 sgmii:sgmii->pcs2_base= e0956a00 sgmii:sgmii->an_base= e0958000 sgmii:sgmii->ra_base= e095a600 sgmii:sgmii->phya_base= e095cc00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=e0956a20, val=0 sgmii: sync_int exit sgmii probe init exit TC3162 hardware watchdog module loaded. irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [crypto_k] res->name:/crypto_k@1fb70000 [crypto_k] res->start:0x1fb70000 === [crypto_k] res->end:0x1fb70803 === [crypto_k] ecnt_crypto_k->base:0xe09dc000 [trng] ecnt_trng_drv_probe test_uc:e0826000 test_c:dd4c0000 cpu_top->base:e09e6800 [apb_timer] ecnt_timer_drv_probe [timer] ecnt_timer->irq: 80 [timer] res->name:/apb_timer1@1fbf0100 i2c_slave init(ecnt_i2c_slave_drv_probe) done [i2s] ecnt_i2s_drv_probe 7523 Thermal Sensor address probe done squashfs: version 4.0 (2009/01/31) Phillip Lougher exFAT: Version 1.2.9 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) PCIe driver version: 7523.0.20210201 PCIe ref clk init. ===EN7523 PCIe init mtk-pcie 1fa91000.pcie: pcie rc 0 linkup success mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success ===============PCIe check===tmp_reg=========81014c3=========== mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers disabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit] pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit] pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 02] pci 0000:00:01.0: bridge window [mem 0x20200000-0x203fffff] mt7512_pcie_fixup: 0x1438 = 20000015 mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12 RC0 Link Traing Result: 10120008 ===========RC0 set conf space INTx============= mt7512_pcie_fixup: 0x2438 = 20200015 mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12 RC1 Link Traing Result: 10120008 ===========RC1 set conf space INTx============= ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162 ECNT ring buffer init success brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6) Set SPI Clock to 50 Mhz spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x02000000 at 0x00000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01 nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 bmt pool size: 81 BMT & BBT Init Success Creating 11 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000004a00000 : "whole" 0x000000000000-0x000000080000 : "boot" 0x000000080000-0x0000000a0000 : "romfile" 0x0000000a0000-0x0000002a0000 : "misc" 0x0000002a0000-0x000000aa0000 : "kernel" 0x000000aa0000-0x000002500000 : "rootfs" 0x0000002a0000-0x000002500000 : "firmware" 0x000002500000-0x000002d00000 : "kernel_slave" 0x000002d00000-0x000004760000 : "rootfs_slave" 0x000002500000-0x000004760000 : "firmware_slave" 0x0000049e0000-0x000004a00000 : "reserve" rootfs PPP generic driver version 2.4.2 PPP BSD Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 USB driver version: 7523.3.20210202 port 0 u2_slew_rate_cal_7523 FM_OUT value = 109(0x0000006D) SR calibration value = 5 port 1 u2_slew_rate_cal_7523 FM_OUT value = 109(0x0000006D) SR calibration value = 5 xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (7503 buckets, 30012 max) ludewei add module gre: GRE over IPv4 demultiplexor driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler tc3162ser_startup VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Freeing unused kernel memory: 244K busybox init and set aff starting pid 439, tty '': '/etc/init.d/rcS' insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directory usbcore: registered new interface driver usb-storage insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory tp_board: loading out-of-tree module taints kernel. Register flash device: flash0 rcS (439): drop_caches: 3 start XPON related APP /tmp/cfg_load is not exist,left time 30 svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so svchost_parse_print_conf: Entry = svc_cfg_main svchost_parse_print_conf: Param = 111 random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) shm_pool_init: base[20000000] size[00200000]] shm_pool_init: Init Done! random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) svc_cfg_start: ........ Load cfg from file [/var/romfile.cfg] ..... tar: invalid mag[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> ic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use backup romfile to check! Couldn't open mtd:reservearea! mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288 Unlocking reservearea ... Could not open mtd device: reservearea [BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> agic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use default romfile to check! mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432 Unlocking reservearea ... Could not open mtd device: reservearea [DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> agic tar: short read cp: can't st[check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> at '/tmp/ctromfile.cfg': No such file or directory /tmp/cfg_load is not exist,left time 29 Use usrfs romfile to check! mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea ctromfile.cfg <<call handle_proline_paras>> mtd[readflash]:device=[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea handle_proline_paras 1564 SSID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ha[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ndle_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. roline[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. _paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 1564 [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. WPAPSK[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. :123456[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 78. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. handrandom: ubusd: uninitialized urandom read (4 bytes read, 54 bits of entropy available) le_proli[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ne_pa[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ras 1[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 564 Srandom: ubusd: uninitialized urandom read (4 bytes read, 58 bits of entropy available) SID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. handle_proline_paras 1564 WPAPSK:12345678. handrandom: ubusd: uninitialized urandom read (4 bytes read, 60 bits of entropy available) le_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 web_passwd:1234. handle_proline_paras 1564 SerialNumber:FHTT12345678. parse proline para Password fail. parse proline para Password fail. handle_proline_paras 1564 Mode:GPON. root.mesh.apclibh.entry.1:BhProfileSsid not found. root.mesh.apclibh.entry.1:BhProfileWpaPsk not found. root.mesh.apclibh.entry.2:BhProfileSsid not found. root.mesh.apclibh.entry.2:BhProfileWpaPsk not found. handle_proline_paras 1564 (null):1. cfg_save_object: open file [/tmp/var/romfile.cfg] fail ----> Load config file fail. svc_cfg_start: ........ ok [20001030]! svchost_get_event_val: get param fail [0] start omci svchost_prandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available) arse_print_conrandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available) f: Path = /lib/random: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available) libpon_svc.so svchost_parse_print_conf: Entry = svc_pon_main svchost_parse_print_conf: Param = 111 svchost_parse_print_conf: Path = /lib/libother_svc.so svchost_parse_print_conf: Entry = svc_other_main svchost_parse_print_conf: Param = 111 svchost_parse_print_conf: Path = /lib/libcentral_ctrl_svc.so svchost_parse_print_conf: Entry = svc_central_ctrl_main svchost_parse_print_conf: Param = 111 module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint ecnt_register_cpu_interrupts random: ubusd: uninitialized urandom read (4 bytes read, 81 bits of entropy available) svc_pon_int: ...... reg event ok svc_pon_int: ...... reg method ok cfg svc load done, 0 ms [svc_cfg_load_special_random: ubusd: uninitialized urandom read (4 bytes read, 82 bits of entropy available) info][581]SET [omci_lib_set_max_ports_list] Result=0 CouldTC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Jan 9 2025-07:33:29). nled path:/userfs/7529_62led.conf 't open mtd:reservearea! svc_other_init: ...... reg event ok svchost_get_event_val: get param fail [0] svchost_get_event_val: get param fail [0] mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.cosvc_centrl_ctrl_init: ...... reg event ok nf Can't opdev mount is start! config 0 en /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf svchost_get_event_val: get param fail [0] PID=547 event receive pthread_create OK, keep gonlksock_create:nlksock create err:Protocol not supported! inactive_notify_handler: nlksock_create fail g...... [svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf mtd[readflash]:detccicmd V1.1.0.0 (Jan 9 2025-07:33:31) ERROR!Create /etc/fwTCver.conf fail! vice=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][661]SET [oam_lib_set_hardware_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf C SIFMaster 0.1 init ===== Interface 0 is ON ===== Register sifm cmd an't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking rrandom: nonblocking pool is initialized eservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0 (gdump_mode_sel): GDUMP sel has switch to 3 ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:3 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:7 ifc_set_action: cpu:1, nbq:8 TP_User Ecnt ponTime:OMCI Startup macType = 0 flashQdmaInit = 0x33 netif_napi_add() called with weight 256 on device lan_int2_if ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: BC:07:1D:7A:B2:B8 Use Internal switch ,type 10 tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9 GE Rext AnaCal Done! (5)(0x25) GE Rext AnaCal Done! (5)(0x25) GE R45 AnaCal zcal_idx(before table) (dec: 45) (hex: 0x2d) GE R45 AnaCal Done! (cnt:13)(after table) ([7][6:0]:0x51) ([6:0]:0xd1) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE Tx offset AnaCal Done! (3)(0x22) GE Tx offset AnaCal Done! (2)(0x2) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (5)(0x24) GE Tx amp AnaCal Done! (13) (0x2d) GE Tx amp AnaCal Done! (22) (0x36) GE Tx amp AnaCal Done! (20) (0x34) GE Tx amp AnaCal Done! (14) (0x2e) [tcPhyInit] in Unlocking config ... Could not open mtd device: config [tcPhyInit] out , r31 = (9, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE Tx offset AnaCal Done! (2)(0x21) GE Tx offset AnaCal Done! (5)(0x24) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (2)(0x2) GE Tx amp AnaCal Done! (6) (0x26) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (19) (0x33) GE Tx amp AnaCal Done! (14) (0x2e) [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (5)(0x24) GE Tx offset AnaCal Done! (2)(0x21) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (2)(0x21) GE Tx amp AnaCal Done! (4) (0x24) GE Tx amp AnaCal Done! (9) (0x29) GE Tx amp AnaCal Done! (18) (0x32) GE Tx amp AnaCal Done! (7) (0x27) [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE Tx offset AnaCal Done! (5)(0x24) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (2)(0x21) GE Tx offset AnaCal Done! (3)(0x3) GE Tx amp AnaCal Done! (1) (0x21) GE Tx amp AnaCal Done! (9) (0x29) GE Tx amp AnaCal Done! (7) (0x27) GE Tx amp AnaCal Done! (16) (0x30) [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) mount: can'not found str : MAP, erase and mount again t find /dev_mount is ok eth0: starting interface. netif_start_queue dev/mtdblock in /etc/fstab macType = 0 flashQdmaInit = 0x33 fe resource init start 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left Ralink HW NAT Module Enabled you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512 HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384 IP check use Black List EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw [c0514268]isForceToCpu=0:0 copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xe0f00000 copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xe0b80000 [C0]core freq at 333000000 Hz [C0]timer_init: Timer clk is running at 125 Mhz [C0]wcid_counter_init:0 [C0]wcid_counter_init:1 [C0][NPU] ba_node_init... [C0]baNode_array_init [C0]counter_init:2 [C0][NPU] queue_mutex_init... [C0]qdma_init [C1]core1_main [C2]timer_isr Store Value 1e903000, val[C2]core2_main [C3]core3_main [C3]do npu_enq_deq_init [c0514244]npu_pkt_buf_addr=9ddf1fc0 npu_wifi_offload_get_pkt_buf_addr=9ddf1fc0 [c0514244]npu_pkt_buf_addr=9ddf1fc0 [C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=9ddf1fc0, 9ddf1fc0 npu_wifi_offload_get_force_to_cpu_flag=0 isForceToCpu=0 [C0](core0_main) just return, because QDMA driver for ARM is not ready mt_whnat: Unknown symbol glb_var_wed_ring (err 0) mt_whnat: Unknown symbol hc_get_chip_ops (err 0) mt_whnat: Unknown symbol mt_wlan_hook_unregister (err 0) mt_whnat: Unknown symbol glb_var_wdma_ring (err 0) mt_whnat: Unknown symbol mt_wlan_hook_register (err 0) mt_whnat: Unknown symbol hc_get_hif_ctrl (err 0) mt_whnat: Unknown symbol glb_var_whnat_fbuf (err 0) mt_whnat: Unknown symbol wlan_operate_get_frag_thld (err 0) mt_whnat: Unknown symbol hc_get_chip_tx_token_nums (err 0) mt_whnat: Unknown symbol hc_get_chip_sw_tx_token_nums (err 0) insmod: can't insert '/lib/modules/mt_whnat.ko': unknown symbol in module, or unknown parameter tso_lan: tso_v2.c [201]: dscpDmaAddr =9ad20000 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_proc_init. val_string:add v4 - 445 - - dport:0, sport:445, daddr:0, saddr:0 ---- 7570_bob.conf ---- ---- cp -f /etc/7570_bob.conf /tmp/ ---- do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=7d data[1]=04 data[2]=bb data[3]=04 do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success! ---- flashtool readflashtobob ---- ______ XPON_PHY init ______ little endian NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0 xPON PHY initialization done E3 patched EN7571 found! FLASH matrix got PWRADC offset = 0x34be PWRADC ready BG 1.76V = 0x289 BG 0.875V = 0x141 RSSI_Vref = 0x214 RSSI_V = 0x2a0 eFuse value = 0xfd eFuse offset = 0.9'C Start GPON Tx Calibration CDR disabled RGS_T0C = 0x4c RGS_T1C = 0x50 CDR enabled APD initialization done en7571_reg_init Initial current loaded PWR/ER loaded TIASD = 0x2e Rx LOS is set Internal DDMI Enabled KT Enabled EN7571 Initialization Done! PON PHY driver version is 2100825.116.11 xPON driver initialization Alloc data struct memory successful, 36508 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 VoIPBasic_Commo [1970-1-1 Thu 00:00:12.892911]omci start! XPON Mapping Module init OK! n SIPPr [1970-1-1 Thu 00:00:12.900127]main gponOmciCmsgsrvInit ot [1970-1-1 Thu 00:00:12.905810]OMCI wait for DM init... ocol is SIP prevSipStatus: 0, curSipStatus: 0 voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0 vtag_drv_init tc_multiwan version: tcsmux V1.1.0.0 (Jan 9 2025-07:33:33). pon_vlan_init Multi Lan port initilize xpon igmp module....done! pon_mac_filter_init Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon_multicast.ko': No such file or directory device eth0 entered promiscuous mode device eth0.1 is not a slave of br0 device eth0.2 is not a slave of br0 device eth0.3 is not a slave of br0 device eth0.4 is not a slave of br0 device eth0 is already a member of a bridge; can't enslave it to bridge br0. device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready device eth0.1 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready device eth0.2 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready device eth0.3 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready device eth0.4 entered promiscuous mode ifconfig: ioctl 0x8913 failed: No such device interface eth0.5 does not exist! insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory ifconfig: SIOCSIFMTU: Invalid argument ifconfig: SIOCSIFMTU: Novlan tag restore switch : enable such device insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory start ponmgr_cfg MTK DSP support rcS (439): drop_caches: 3 rcS.sdk init done! creat_domain_proc ok tp_domain init ok device recognition register success status: DSPCore[Ver:TVB1.0.23.800-1] [1] PCM V2.4 (Jun 29 2021 03:11:21) bind irq-113 to CPU1 PCM_INT=28 pcm[Ver:TVB1.0.23.800-1] lec[Ver:TVB1.0.23.800-1] SYS_HCLK=250 Major Num:233, device: spi spi[Ver:TVB1.0.23.800-1] [14.529][cos] 415 - ERROR: before cpu mask 00000003 [14.529][cos] 430 - ERROR: after cpu mask 00000001 ========fxs3 init start======== ========fxs3 init complete======== . init mod-slic3 slic3[Ver:TVB1.0.23.800-1] mode= ISI init mod-ksocket ksocket[Ver:TVB1.0.23.800-1] ortp[Ver:TVB1.0.23.800-1] monitor value xxxxxxx init mod-acodec acodec[Ver:TVB1.0.23.800-1] ponTime:ONU Ready init mod-foip3 foip3[Ver:TVB1.0.23.800-1] Interface name length cannot exceed 15 characters. Interface name length cannot exceed 15 characters. Silabs SLIC type selected by SW makefile compile option [4294938864][slic][INFO][gpio_clocksrc_init:L2399]ISI [4294938865][spi][INFO][SPI_Reset:L473] SPI_Reset 2 [15.752][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml slic deviceVerify ProSLIC_Version 9.1.0 Silabs SLIC Reset REG_0 = 0xaa ,device[0], Part_num 0x5, Revision 0x2 device[0]:deviceVerify Success! SPI Reset times:1 pcm1 ch num:1 pcm2 ch num:0 fxs[Ver:TVB1.0.23.800-1] [fxs_init_action](1344)noinit=0 pcm1 ch num:1 pcm2 ch num:0 Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1) deviceInit on DeviceId = 0 ProSLIC_createControlInterface = 0 ProSLIC_createDevice = 0 get_start_chanid=0 ProSLIC_createChannel = 0 ProSLIC_SWInitChan = 0 device [0] chanPvt[0].chanType 1 device [0] chanPvt[0].chipType 6 Si3218x_Init_with_Options(640) size = 1 init_opt = 0 SiVoice: Channel 0: Type = PROSLIC Rev = 2 ProSLIC:loading patch: 06302015 . Si3218x: Channel 0 : VBAT Up = 58.849 v ProSLIC:Starting LB Cal on channel 0 .init mod-vdsp for 1 channels 2 sessions vdsp[Ver:TVB1.0.23.800-1] =============================== || MTK DSP init successfully || =============================== pid 2's current affinity mask: 3 pid 882's current affinity mask: 1 ___ COUNTRY SETTING ___ ring_idx : 0 imp_idx : 0 ProSLIC:PCMStart slic_set_gainLv - fffffffa / 0 pid 882's new affinity mask: 2 fxsSetLine[0]state 0x9 State UNKNOWN ! pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 1090Dump SLIC[0] register: '================================= 00 01 02 03 04 05 06 07 08 09 ================================= s00: aa 00 00 1f 00 40 00 a2 e5 ff 10: 25 13 00 00 00 20 00 00 00 00 20: 00 00 00 02 00 00 00 00 00 00 30: 11 00 00 10 00 00 00 02 00 40 40: 1f 00 7d 00 00 59 04 10 66 00 50: 00 00 00 00 00 00 00 00 ff 00 60: 00 00 e4 00 00 00 00 00 f0 00 70: 00 00 00 00 00 00 02 00 00 00 80: 3f 01 b7 03 af 05 0e 0f ed 10 90: 40 07 9f 06 c1 11 24 05 80 05 100:c 00 01 00 00 00 00 00 00 00 00 110: 00 00 47 01 a9 00 02 ff 38 00 120: 87 05 87 05 00 20 03 00 ================================= urrenwrite address(47) value : 0x8 t affinity mask: 1 pid 1090's new affinity mask: 2 rcS (439): drop_caches: 3 rcS init done! Please press Enter to activate this console. TC3162 hardware watchdog initialized cpu 1 cpu 0 sleep 90s! [20.180][cmm] 5547 - ERROR: Read config index:3 [20.315][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002 [20 xpon_phy NOT start yet!! [pon_phy_set_api_dispatch:1404] gpPhyPriv->is_phy_start = 0 Disable GPON ONU .318][cos] 642 - ERROR: Disable gpon driver before true SN set [20.331][cos] 246 - ERROR: COS wait for OMCI init... [1970-1-1 Thu 00:00:21.10120]DM init use 8 seconds! [1970-1-1 Thu 00:00:21.15512][main][1127]:Enter OMCI State Machine, OMCI_STATE_START! [1970-1-1 Thu 00:00:21.167189][omciAddVendorMeToStdMeTable][1142] before DM operation ,totalSize(2) [ omciAddVen [1970-1-1 Thu 00:00:21.217436][omciAddVendorMeToStdMeTable][1193] toalTblSize(2) a/b (0) dorMeToStdM [1970-1-1 Thu 00:00:21.226433] initFilterMeInfo toalTblSize = 3 eTable ] 1159 [1970-1-1 Thu 00:00:21.233431][main][1145]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE! : 1#1 [ [1970-1-1 Thu 00:00:21.244536]Cannot open file "/tmp/olt_mode_param" omc [1970-1-1 Thu 00:00:21.251154][omciInitCapability][540] omciInitCapability In iAddVe [1970-1-1 Thu 00:00:21.258879]pPortList(48,248,47,47,47,47,32) ndorMe [1970-1-1 Thu 00:00:21.265172]pPort(48) ToS [1970-1-1 Thu 00:00:21.269245]pPort(248) tdM [1970-1-1 Thu 00:00:21.273461]pPort(47) eTab [1970-1-1 Thu 00:00:21.277634]pPort(47) le ] [1970-1-1 Thu 00:00:21.281736]pPort(47) 116 [1970-1-1 Thu 00:00:21.285967]pPort(47) 3: [1970-1-1 Thu 00:00:21.289935]pPort(32) 2#1,1 [ omciAddVendorMeToStdMeTable ] 1159: 1#2 [ omciAddVendorMeToStdMeTable ] 1163: 2#2,1 [1970-1-1 Thu 00:00:21.314401][omciInitCapability][636] getNext Dev2 currGponAuthObj SN(54504C471D7AB2B8),SNtype(1) [1970-1-1 Thu 00:00:21.325547][omciInitCapability][683] currOmciCapObj.vendorId IS (TPLG) [1970-1-1 Thu 00:00:21.334257]read_flash:read In - 8 bytes in 77463552 [1970-1-1 Thu 00:00:21.341520]read_flash:read In - 8 bytes in 77463552 [1970-1-1 Thu 00:00:21.362874]Cannot open file "/tmp/olt_mode_param" [1970-1-1 Thu 00:00:21.369519]read_flash:read In - 512 bytes in 2752512 [1970-1-1 Thu 00:00:21.376994]Cannot open file "/tmp/olt_mode_param" [1970-1-1 Thu 00:00:21.383490]read_flash:read In - 512 bytes in 38797312 svchost_get_event_val: get param fail [0] [1970-1-1 Thu 00:00:21.404770]do not config omci intance by file info ctromfile.cfg [1970-1-1 Thu 00:00:21.433369][main][1155]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT! sh: /bin/mv: not found set olt type: 0 ponTime:Connection Start working_mode: 1 [42949394420ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0 C[42949394430ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1 [42949394440ms][phy_init.c:1946] PON PHY scu_reset_init mode=1 ouldn't open image file: /tmp/tc_sto[42949394450ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1 re_romfile.conf! [1970-1-1 Thu 00:00:21.505483][main][1183]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN! Unlocking reservearea ... Could not open mtd device: reservearea Couldn't open image file: /tmp/tc_store_romfile.conf! [22.350][cos] 252 - ERROR: OMCI init use 2 seconds! ===========>manufacture:0, ISPflag:0 ioctl: No such device ifconfig: SIOCSIFHWADDR: No such device IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 left promiscuous mode br0: port 4(eth0.4) entered disabled state interface eth0.5 does not exist! device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode ifconfig: ioctl 0x8913 failed: No such device sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory interface eth0.5 does not exist! sendto: No such file or directory line(593) Msg.type(2014) pid(852) errno(2) ret(-1) [ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf [25.160][cos] 121 - ERROR: CQC:tm_start:25, tm_end:25 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [27.170][cos] 121 - ERROR: CQC:tm_start:25, tm_end:27 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [29.180][cos] 121 - ERROR: CQC:tm_start:25, tm_end:29 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [31.190][cos] 121 - ERROR: CQC:tm_start:25, tm_end:31 [31.190][cos] 137 - ERROR: CQC:FAILED! [31.190][cos] 702 - ERROR: Expire time! device eth0.1 left promiscuous mode br_agc: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br_agc: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br_agc: port 3(eth0.3) entered disabled state device eth0.4 left promiscuous mode br_agc: port 4(eth0.4) entered disabled state interface eth0.5 does not exist! [31.468][cmm] 591: num of CPU core = 2. [31.468][cmm] 601: parent pid 852 [31.470][cmm] 6195 - ERROR: read oemID from flash :FB2096B95D3F0E7340FD9A6AA2E93C18 [31.470][cmm] 6257 - ERROR: read zone from flash :BR [31.479][cmm] 6195 - ERROR: read oemID from flash :FB2096B95D3F0E7340FD9A6AA2E93C18 [31.480][cmm] 6257 - ERROR: read zone from flash :BR [31.512][cmm] 1443 - ERROR: set serialNumber to gponsn 54504C471D7AB2B8 [31.592][cmm] 608: start creating dropbear RSA key at CPU core 1. [31.592][cmm] 618: child pre cpu mask 00000001 [31.593][cmm] 632: child post cpu mask 00000002 [31.593][cmm] 636: Try create dropbear RSA key loop=0 ... Generating 2048 bit rsa key, this may take a while... ip6tables: No chain/target/match by that name. [31.892][cmm] 3192 - ERROR: Open TZ file error! [32.117][cwmp] 528 - ERROR: Set socket opt error. killall: dnsmasq: no process killed [32.242][cmm] 158 - WARN: Empty DNSServer() [32.393][cmm] 158 - WARN: Empty DNSServer() [32.405][cmm] 158 - WARN: Empty DNSServer() [32.413][cmm] 158 - WARN: Empty DNSServer() ip6tables: Bad rule (does a matching rule exist in that chain?). ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. NTP server list: iptables: Bad rule (does a matching rule exist in that chain?). ifconfig: SIOCSIFHWADDR: Cannot assign requested address bridge name br0 has exist bridge name br0 has exist device br0 already exists; can't create bridge with the same name IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready done [32.742][cmm] 203 - ERROR: ifName is eth0, vid is 5 [32.763][cmm] 203 - ERROR: ifName is eth0, vid is 4 vconfig: ioctl error for add: File exists [32.776][cmm] 203 - ERROR: ifName is eth0, vid is 3 vconfig: ioctl error for add: File exists [32.789][cmm] 203 - ERROR: ifName is eth0, vid is 2 vconfig: ioctl error for add: File exists [32.802][cmm] 203 - ERROR: ifName is eth0, vid is 1 vconfig: ioctl error for add: File exists [32.815][cmm] 203 - ERROR: ifName is eth0, vid is 0 sh: can't create /proc/tplink/eth_vlan: nonexistent directory device eth0.1 entered promiscuous mode [32.953][cmm] 284 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName: Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [32.987][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! iptables: Bad rule (does a matching rule exist in that chain?). device eth0.2 entered promiscuous mode Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [33.056][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! device eth0.3 entered promiscuous mode Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [33.123][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! br0: port 1(eth0.1) entered disabled state device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state br0: port 2(eth0.2) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state br0: port 3(eth0.3) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 device eth0 entered promiscuous mode br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode device eth0.5 is not a slave of br0 device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [33.594][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! [33.621][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public [33.622][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next. [33.622][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public [33.622][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next. [33.623][cmm] 2021 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0 [ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf [35.355][cmm] 648: create dropbear RSA key success. [35.356][cmm] 655: start creating dropbear DSS key at CPU core 1. [35.356][cmm] 659: Try create dropbear DSS key loop=0 ... Generating 1024 bit dss key, this may take a while... WiFi@C12L1,get_dbg_setting_by_profile() 4428: debug level setting=INDEX0_debug_level not found!! WiFi@C12L1,get_dbg_setting_by_profile() 4451: debug option setting=INDEX0_debug_option not found!! pci 0000:00:00.0: enabling device (0140 -> 0142) mt_pci_slave 0000:01:00.0: enabling device (0140 -> 0142) !!HIF_RX_EVENT Only pci 0000:00:01.0: enabling device (0140 -> 0142) rtpci 0000:02:00.0: enabling device (0140 -> 0142) npu_offload_mapping upcount=2 npu_offload_mapping PCIE_FUNCTION_MAX_NUM=10npu_offload_mapping chipid=790a =========retvalue=790a14c3========= =========chipid=790a========= npu_offload_mapping EcntPciePortTypeMask=8 mt7916_init()--> Use the default iPAiLNA bin image! <--mt7916_init() RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128! WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX1 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX2 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX3 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX4 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX5 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX6 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX7 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX8 WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX9 WiFi@C12L2,match_index_by_chipname() 518: Not find slot id, back to old rule. msta_ifname not found !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only whnat_module_init(): module init and register callback for whnat create whnat_ctrl ok!!! wed_slot_map_get(): assign slot_id:0 for entry: 0! wed_slot_map_get(): assign slot_id:1 for entry: 1! ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT msta_ifname not found whnat_cap_support(): chip_id=7906 is in WHNAT support list wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 wed_init(1): irq=91,base_addr=0xe56fe000 wed_ring_init(): wed ring init result = 0 whnat_dma_buf_alloc for glb_var_whnat_fbuf[1] create wed ok!!! wdma_init(): wdma(1) base addr=e584a400 wdma_init(): wdma(1) irq[0]=87 wdma_init(): wdma(1) irq[1]=88 wdma_init(): wdma(1) irq[2]=89 wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91 wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_probe(): probe fail since whnat is full! whnat_dev0: probe of 1fa02000.wed2 failed with error -1 WiFi@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail! WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS0 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS1 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS2 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS3 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS4 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS5 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS6 PhyMode=78 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS7 PhyMode=177 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS8 PhyMode=177 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS9 PhyMode=177 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS10 PhyMode=177 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS11 PhyMode=177 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS12 PhyMode=177 WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS13 PhyMode=177 WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0 WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=0, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=1, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=2, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=3, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=4, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=5, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=6, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=7, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=8, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=9, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=10, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=11, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=12, Desired MFPC=0 WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=13, Desired MFPC=0 WscKeyASCII=8 WscKeyASCII=8 WscKeyASCII=8 WscKeyASCII=8 WscKeyASCII=8 WscKeyASCII=8 WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect DriverModel=2 !!!! do phy and virtual address mapping dramBaEntry_pa=94c00000 PciePortType=3 after :phy_add= 20000000,ring_idx=2 [C0][NPU] npu_set_pcie_base, addr=200d4540, band_idx=0 [C0][npu_set_pcie_base] 2.4G pcieBase 200d4540 mem_base 200d4540, hw_rx_desc=0 after :phy_add= 20200000,ring_idx=0 [C0][NPU] npu_set_pcie_base, addr=202d8550, band_idx=1 [C0][npu_set_pcie_base] 5G pcieBase 202d8550 mem_base 202d8550, hw_rx_desc=0 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7916_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:1 [C0][NPU] Enter npu_npu_init_rxd_5G, band_idx=1, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000 AllocSize 6000 AllocVa e586e000, .AllocPa 1e800000 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7916_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:0 [C0][NPU] Enter(2.4G) npu_npu_init_rxd, band_idx=0, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020 AllocSize 6000 AllocVa e5872020, .AllocPa 1e806020 register rx data done task d7cf1954 register rx data done task d734d954 register rx data done task d734d954 =====>register 2G hostdapt_registe_wifitask 0 register rx data done task d734d954 =====>register 5G hostdapt_registe_wifitask 1 wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 using E1 ROM patch using E1 RAM current sync CR = 0x1 Built date: 20230825174652a Platform: ALPS HW/SW version: 0x8a108a10 Patch version: 0xffffffff current sync CR = 0x1 Chip ID: 0x13 Eco version: 0x00 Region number: 0x09 Format version: 0x02 Format flag: 0x01 Ram version: ____000000 Built date: 20230825174715 Common crc: 0x5b89c7db Release info: header tag = 0, total length = 80 tag 1, padding length = 1, tag length = 75 payload: t-neptune-main-2111-7916-imp-MT7916_E1_ASIC_ROM_RAM_REBB_IMP-20230825174602 Chip ID: 0x00 Eco version: 0x00 Region number: 0x03 Format version: 0x02 Format flag: 0x01 Ram version: DEV_000000 Built date: 20230825174802 Common crc: 0x7e5821c5 Release info: header tag = 0, total length = 0 current sync CR = 0x7 efuse_probe: efuse = 100002 flash_read(): read from address:0x120000, len:0x1000! WiFi@C02L1,is_cal_free_ic() 749: [a-die version:1] [38.724][cmm] 671: create dropbear DSS key success. [38.724][cmm] 680: parent pid 852 [38.724][cmm] 688: parent pre cpu mask 00000001 [38.725][cmm] 702: parent post cpu mask 00000003 WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now! WiFi@C01L1,AntCfgInit() 3098: Not support for HIF_MT yet! MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku_5g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku-bf_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku-bf_5g.dat WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet! WiFi@C12L1,SCS_init() 880: INIT SCSEnable [0]= 0 WiFi@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0 WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0) WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0) WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited! WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0) WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0) WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap] WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap] WiFi@C00L2,red_tail_drop_init() 83: red_tail_drop_init: available token:7680, whnat_en:1 WiFi@C00L1,MtCmdCr4RedSet() 917: MtCmdCr4RedSet: (ret = 0) WiFi@C00L1,SendRedCmd() 1052: SendRedCmd:(ret = 1) jiffies=ffff9aac, POLLING_MODE_DETECT_INTV=300 ==ecnt_wifi_rx_rps_hook=== WiFi@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP WiFi@C01L3,wifi_sys_open() 845: wdev idx = 0 WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](0): get wdev_op_lock. WiFi@C00L3,BuildChannelList() 518: BandIdx = 0, PhyMode = 78, ChListNum = 13: WiFi@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G. WiFi@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=1, band_bw[band_idx]=0 phy_freq_adjust : no prim_ch value for adjust! WiFi@C23L1,operate_loader_phy() 395: phy_freq_adjust failed! WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap] wdev_attr_update(): wdevId0 = bc:07:1d:7a:b2:b8 WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0 WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0 WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock. WiFi@C23L1,HcGetBandByChannel() 1056: No hdev parking on channel:0, just return a default band_idx 0! WiFi@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok WiFi@C00L2,ApAutoChannelAtBootUp() 341: -----------------> WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0) WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0) WiFi@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x21c/0x4d4 [mt7916_ap])!! WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=1, ctrl_ch2=0, cent_ch=1 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=1, ctrl_ch2=0, cent_ch=1, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=6, ctrl_ch2=0, cent_ch=6, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=7, ctrl_ch2=0, cent_ch=7, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=8, ctrl_ch2=0, cent_ch=8, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=9, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=10, ctrl_ch2=0, cent_ch=10, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=11, ctrl_ch2=0, cent_ch=11, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) WiFi@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2f8/0x4d4 [mt7916_ap])!! WiFi@C23L3,SelectClearChannelBusyTime() 1864: ==================================================================== WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 1 : Busy Time = 12964, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 2 : Busy Time = 13604, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 3 : Busy Time = 19376, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 4 : Busy Time = 13557, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 5 : Busy Time = 7961, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 6 : Busy Time = 6236, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 7 : Busy Time = 16395, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 8 : Busy Time = 12519, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 9 : Busy Time = 15526, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 10 : Busy Time = 13683, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 11 : Busy Time = 13301, Skip Channel = FALSE, BwCap = TRUE WiFi@C23L3,SelectClearChannelBusyTime() 1873: ==================================================================== WiFi@C23L3,SelectClearChannelBusyTime() 2143: Rule 3 Channel Busy time value : Select Primary Channel 6 WiFi@C23L3,SelectClearChannelBusyTime() 2145: Rule 3 Channel Busy time value : Min Channel Busy = 6236 WiFi@C23L3,SelectClearChannelBusyTime() 2150: Rule 3 Channel Busy time value : BW = 20 WiFi@C23L3,SelectClearChannelBusyTime() 2189: [SelectClearChannelBusyTime] - band0 END WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=6, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0) WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=6, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0) WiFi@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G. WiFi@C23L3,zero_wait_dfs_switch_ch() 823: outband ch 0, ch_stat 0 WiFi@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:0, CfgMode:0 WiFi@C15L2,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0 WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap] WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(0) WiFi@C01L3,wifi_sys_linkup() 1155: wdev idx = 0 WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](0): get wdev_op_lock. WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0 WiFi@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 0 (ra0) WiFi@C08L3,UpdateBeaconHandler() 1915: Band0 BcnInitedRnd = 35 WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](0): release wdev_op_lock. PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 Set_Map_Proc current MAP MODE is 0 Set_MapR2_Proc MAP R2 is already disabled Set_Bh_Bss_Proc ra0 bandIdx = 0 ,DevOwnRole 0x20 Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x0 Set_Fh_Bss_Proc ra4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra4 bandIdx = 0 ,DevOwnRole 0x44 Set_Fh_Bss_Proc ra5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra5 bandIdx = 0 ,DevOwnRole 0x48 Set_Fh_Bss_Proc ra6 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Sta_Proc apcli0 wdev->MAPCfg.DevOwnRole 0x0 7906@C01L2,RTMP_COM_IoctlHandle() 1493: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN WiFi@C08L2,ap_link_down() 7195: (caller:ap_inf_close+0x58/0x170 [mt7916_ap]), wdev(0) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:2, caller:ap_link_down+0x7c/0x130 [mt7916_ap])!! 7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 0 7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](0): get wdev_op_lock. 7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=0 7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](0): release wdev_op_lock. WiFi@C01L3,wifi_sys_close() 934: wdev idx = 0 7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](0): get wdev_op_lock. 7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=0 7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock. 7906@C01L2,RTMP_COM_IoctlHandle() 1516: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT 7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! 7906@C13L0,MacTableDeleteEntry() 1655: (caller:MacTableResetWdev+0xac/0x24c [mt7916_ap]): wcid 0 ===== 7906@C01L3,wifi_sys_disconn_act() 991: wdev_idx=0 7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_disconn_act+0x64/0x2e8 [mt7916_ap](0): get wdev_op_lock. 7906@C08L3,wifi_sys_op_unlock() 813: wifi_sys_disconn_act+0x8c/0x2e8 [mt7916_ap](0): release wdev_op_lock. WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(0) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(1) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(1) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(2) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(2) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(3) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(3) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(4) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(4) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(5) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(5) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(6) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(6) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(7) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(7) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(8) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(8) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(9) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(9) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(10) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(10) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(11) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(11) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(12) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(12) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(13) bss not ready (state:0, caller:APStopByBss+0x100/0x4b8 [mt7916_ap])!! WiFi@C08L2,ap_link_down() 7195: (caller:APStopByBss+0x180/0x4b8 [mt7916_ap]), wdev(13) current sync CR = 0x7 current sync CR = 0x7 current sync CR = 0x7 current sync CR = 0x7 current sync CR = 0x7 current sync CR = 0x1 7906@C04L1,RT28xxPciAsicRadioOff() 144: Not support for HIF_MT yet! 7906@C00L1,RTMPDrvClose() 1120: call RT28xxPciAsicRadioOff fail !! whnat_ring_exit(): cookie=e5981000 unregister rx data done task d7cf1954 =====>unregister 5G hostdapt_registe_wifitask 1 unregister rx data done task d734d954 =====>unregister 2G hostdapt_registe_wifitask 0 [Nop_List_Backup] NopList Channel count:0 <---- wifi_chip_remove(): Chang WED IRQ: 91 to CHIP IRQ: 83 wed_ser_task(): wed_ser exist, wed->irq=91! whnat_remove(): whnat remove done!! whnat_driver_exit(): whnat entry clear done!! Set_Cmm_WirelessMode_Proc, wdev =e5d1eb68,wdev(0) wdev->if_up_down_state =0 bss not ready(state:0, caller:RTMPAPPrivIoctlSet+0x1e4/0x388 [mt7916_ap])!! 7906@C12L1,Set_Cmm_WirelessMode_Proc() 856: Set_WirelessMode_Proc::parameters out of range Interface doesn't accept private ioctl... set (8BE2): Network is down 7906@C12L1,Set_VhtBw_Proc() 9718: (error Channel = 0) Interface dowlan_operate_get_prim_ch: op NULL wlan_operate_get_bw: op NULL esn't accept private ioctl... set (8BE2): Invalid argument 7906@C12L1,Set_HtExtcha_Proc() 8396: ra0 interface is down, Set_HtExtcha_Proc() return!!! Interface doesn't accept private ioctl... set (8BE2): Invalid argument 7906@C12L1,RTMPAPPrivIoctlSet() 3676: IOCTL::(iwpriv) Command not Support [EDCCAEnable=0] Interface doesn't accept private ioctl... set (8BE2): Invalid argument 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 9f 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 38 7906@C00L1,MtCmdSetVoWFeatureCtrl() 7832: (rty = 0) 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 38 7906@C00L1,MtCmdSetVoWFeatureCtrl() 7832: (rty = 1) 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 38 7906@C00L1,MtCmdSetVoWFeatureCtrl() 7832: (rty = 2) set_vow_airtime_fairness_en: set 0. 7906@C00L1,set_vow_airtime_fairness_en() 2331: set command failed. Interface doesn't accept private ioctl... set (8BE2): Invalid argument 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 36 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 36 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 36 set_vow_dwrr_max_wait_time: set 1. 7906@C00L1,set_vow_dwrr_max_wait_time() 2991: set command failed. Interface doesn't accept private ioctl... set (8BE2): Invalid argument SetPercentageCtrl: ucBandIdx = 0 SetPercentageCtrl: TxPowerPercentEn = 1 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 58 Interface doesn't accept private ioctl... set (8BE2): Invalid argument SetPowerDropCtrl: ucPowerDrop = 100 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 58 Interface doesn't accept private ioctl... set (8BE2): Invalid argument 7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:Set_BeaconPeriod_Proc+0xbc/0x200 [mt7916_ap])!! Set_FragThreshold_Proc::set wdev0 FragThreshold=2346) 7906@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:Set_DtimPeriod_Proc+0x170/0x268 [mt7916_ap])!! interface is down, return!!! 7906@C12L3,Set_DtimPeriod_Proc() 16125: (DtimPeriod=1) Interface doesn't accept private ioctl... set (8BE2): Network is down can't add ra5 to bridge br0: Invalid argument Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [45.565][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! can't add ra4 to bridge br0: Invalid argument Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [45.607][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! can't add ra3 to bridge br0: Invalid argument Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [45.648][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! can't add ra2 to bridge br0: Invalid argument Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [45.690][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! can't add ra1 to bridge br0: Invalid argument Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [45.732][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! device ra0 entered promiscuous mode device apcli0 entered promiscuous mode Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [45.801][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0! SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23 WLAN-Start wlNetlinkTool Waiting for Wireless Events from interfaces... swWlSetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 60 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD a7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23 nChkAhbErr: netlink to do SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 40 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 20 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23 SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 119, restore_temp: 114, recheck_time: 1000 7906@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD 7906@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 23 7906@C08L2,mbss_virtual_if_open() 134: ===> rai0 7906@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT msta_ifname not found whnat_cap_support(): chip_id=7906 is in WHNAT support list wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 wed_init(1): irq=91,base_addr=0xe6e86000 wed_ring_init(): wed ring init result = 0 create wed ok!!! wdma_init(): wdma(1) base addr=e6eba400 wdma_init(): wdma(1) irq[0]=87 wdma_init(): wdma(1) irq[1]=88 wdma_init(): wdma(1) irq[2]=89 wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91 wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_probe(): probe fail since whnat is full! whnat_dev1: probe of 1fa02000.wed2 failed with error -1 7906@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail! 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS0 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS1 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS2 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS3 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS4 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS5 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS6 PhyMode=78 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS7 PhyMode=177 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS8 PhyMode=177 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS9 PhyMode=177 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS10 PhyMode=177 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS11 PhyMode=177 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS12 PhyMode=177 7906@C12L1,RTMPWirelessModeCfg() 592: Init: BSS13 PhyMode=177 7906@C23L3,auto_ch_select_set_cfg() 3508: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 7906@C23L3,auto_ch_select_set_cfg() 3508: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0: 7906@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0 7906@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0 7906@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=0, Desired MFPC=0 ```

Sirherobrine23 commented 2026-02-08 19:21:13 +00:00

Owner

Copy Link

Copy Source

@kvn193, por enquando vc vai escrever o rootfs, o kernel provalvelmente dever ser igual, mas assim que eu localizar direito aqui ja te mando direitinho como vc dever escrever na nand, voce dever enviar esse arquivo para o roteado tftp, vc vai colocar seu computador com o ip estatico, 192.168.1.100, mascara 255.255.255.0, vai vai iniciar o servidor tftp com esse arquivo que esta aqui em baixo

vc vai carregar o rootfs com esse comando tftpboot 192.168.1.100 rootfs.bin

depois voce vai gravar na nand com esse comando no u-boot:

flash write 0xaa0000 0x$filesize $loadaddr

e reinicia o roteador

@kvn193, por enquando vc vai escrever o rootfs, o kernel provalvelmente dever ser igual, mas assim que eu localizar direito aqui ja te mando direitinho como vc dever escrever na nand, voce dever enviar esse arquivo para o roteado tftp, vc vai colocar seu computador com o ip estatico, `192.168.1.100`, mascara `255.255.255.0`, vai vai iniciar o servidor tftp com esse arquivo que esta aqui em baixo vc vai carregar o rootfs com esse comando `tftpboot 192.168.1.100 rootfs.bin` depois voce vai gravar na nand com esse comando no u-boot: ``` flash write 0xaa0000 0x$filesize $loadaddr ``` e reinicia o roteador

rootfs.bin

23 MiB

Sirherobrine23 commented 2026-02-08 19:28:27 +00:00

Owner

Copy Link

Copy Source

<video src="/attachments/869347b8-d3da-4380-be48-2947fa5da6ea" title="Gravação da tela 2026_02_08 16-26-03.mp4" controls></video>

Gravação da tela 2026_02_08 16-26-03.mp4

4.9 MiB

kvn193 commented 2026-02-08 21:13:29 +00:00

Author

Copy Link

Copy Source

Huawei MA5671A OpenWRT firmware pack (SFP XPON ONU)

Huawei MA5671A OpenWRT firmware pack (SFP XPON ONU)

Files.fm_MA5671A、ALCATEL及NOKIA固件.zip

475 MiB

kvn193 commented 2026-02-09 00:45:25 +00:00

Author

Copy Link

Copy Source

EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=512MB


U-Boot 2014.04-rc1 (Sep 02 2025 - 02:26:44)

DRAM:  496 MiB
EN7529CT
Now running in RAM - U-Boot at: 9edf7000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash :  _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In:    serial
Out:   serial
Err:   serial
CPU0: found redistributor 0 region 0:9ee3dba0
Net:   ecnt_eth
               Uip activated
use flash mac: BC: 7:1D:7A:B2:B8
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 489:  CPE init
[ cp_initCommProto ] 277:  g_commProtoConfig.myMac: bc:07:1d:7a:b2:b8
[ os_initCPEInfo ] 382:  hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 383:  sw ver: 0.8.0 3.0.0 v6096
[ os_initCPEInfo ] 390:  sn: 22515X8006387
[ os_initCPEInfo ] 393:  pin: 70041675
[ os_initCPEInfo ] 400:  endian: 0
[ os_initCPEInfo ] 403:  acFlag: 0
[ os_getFullResetAndReconfigPermission ] 288:  no vaild isp config, allow to fullreset of con                         fig
[ CPEinit ] 513:  CPE is idle
Hit any key to stop autoboot:  0
ECNT> setenv loadaddr 0x84fc8f18
ECNT> tftpboot 192.168.1.100:openwrt.bin
use flash mac: BC: 7:1D:7A:B2:B8
use flash mac: BC: 7:1D:7A:B2:B8
Using ecnt_eth device
TFTP from server 192.168.1.100; our IP address is 192.168.1.1
                                                             Filename 'openwrt.bin'.
                                                                                    Load addr                         ess: 0x84fc8f18
Loading: T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T                          T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #                         T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T #T T T #T T T T T T T T T T #T T T T T                          T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T                          T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T
         T #T T T T T T T T T T #T T T T T T T #T #T T T #T T #T T T #T T #T T T #T T #T T #T                          T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T T #T T                          T T T T T T T T T #T T T T T T #T T T #T T #T T #T #T T T T T T #T T #T T T #T T #T T T #T T                          #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T                          T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T                          T #T T T #T T #T T T #T T
         #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T #                         T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T T T #T T #T T T #T T #T T T #T T #T T                          T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T                          T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T T #T T #T T #T T T                          #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T                          #T T T T T #T T
         #T T T #T T T T T #T T T T T T T T T T #T T T T T T T #T #T T T #T T #T T T #T T #T                          T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T T #T T #T T T #T T #T T #T T                          T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T T #T T #T T                          T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T                          T #T T #T T T #T #T T #T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T T T #T T                          #T T T #T T #T T #T T T
         #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T                          T #T T T #T #T T #T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T T T #T T T #T T #                         T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T                          #T T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T #T T T T T #T T #T                          T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T                          T
         T #T T #T T T #T T T #T T T T T T T T T T #T T T T T T T T T T #T #T T T #T T #T T #                         T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T                          T #T T T #T T #T T T #T T #T T T #T T #T T T T T #T T T T T T T T T #T T #T T T T #T T T T T                          T T T T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T                          T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T T #T T T T T T T T #T T T T                          T T T #T T T T T T T T T #T T #T T
         #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T                          T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T #T T T #T T T T T T T #T T T T T                          T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T                          T #T T #T T T #T T #T T #T T T #T T #T T T T T T #T T T T T #T T T T T #T T T T T T T T T T                          #T T T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T
         #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T T T #T T T T T #T T T T T #T                          T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T There is no data available in                          IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:2
There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:1
There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:0
#T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T                          #T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T #T T #T T T #T T #T T                          T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T                          T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T
         #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T                          T T #T T #T T #T T T #T T #T T T #T T #T T T T #T T #T #T T #T T T #T T T #T T T T T T #T T                          T T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T                          #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T T T T #T T #T #T T T T T T T #T T                          T T T T T T T T #T T T T T #T #T T T #T T #T T T #T T #T T #T T T #T T
         #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T                          T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T #                         T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T                          #T T T T #T T T T T #T T T T T #T T T #T T #T T T T T T T T T T #T T T T T #T T T #T T #T T T                          #T T #T T T #T T #T T #T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T                          T T #T T
         #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T T #T T T T #T T #                         T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T                          #T T T #T T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T                          #T T #T T T #T T #T There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9ee                         c7a30 TIMEs:2
There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:1
There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:0
T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T                          T #T T T T #T T T T #T T #T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T                          T #T T #T T #T T T #T T #T T
         T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T                          #T T T T T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T                          T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T                          T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T T #T T #T T #T T                          T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T                          T #T T #T T T T T T T T
         T #T T T T T T T T T T #T T T T T #T T T T T T #T T T T #T T #T T T #T T #T T T #T T                          #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T T #T T #T T T #T T #T T                          T #T T #T T T T T T T T #T T T T T T T #T T T T T T T T #T T T T T T #T T #T T #T T T #T T #T                          T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #                         T T #T T #T T #T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T #T T #T T #T T                          T #T T #T T T #T T #T T
         T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T                          T T T #T T T T T T #T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T #T T T                          #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T                          T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #                         T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T                          #T T T# T T T #T T T T T T T T T
         T T #T T T T T T T T T T #T T T T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T                          #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T                          #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T T #T T #T T #T T T #                         T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T #T T T #T T #T T T #T #                         T T T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T T #T T #T T T #T T #T T T                          #T T #T T #T T #T T #T T T #T T
         #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T T T T #T                          T T T T T #T T T T T T T T T #T T T T T T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T                          #T T T #T T #T T #T T T #T T #T T T #T #T T T #T T #T T T #T #T T T #T T T #T T #T T T #T T T                          T T T T T T T #T T T T T T #T T T T T T T T T #T T T #T T T #T T T T #T T #T T #T T T #T T #                         T T T #T T #T T T #T T T #T T T #T T #T T #T T T #T T T #T T T #T T T #T T T T #T T #T T T #T                          T T T T T T #T T T T T T T T #T T T T T T T T T
         T #T T T #T T #T T T T T #T T #T #T T T T #T T T #T T #T T #T T T #T T #T #T T T #T                          T T #T T T #T T #T T T #T T #T T T T #T T T #T T T #T T T T #T T #T #T T T T #T T T T T T T T                          T T #T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T #T T T #T T T T #T T #T T #                         T T #T T T #T #T T #T T T #T T #T T T #T T #T T #T #T T T T #T T T #T #T T T #T T T T T T T #                         T T T T T T T T T T #T T T T T T T T T T #T T T T #T T T #T T #T T T #T T #T T T #T T #T T T                          T #T T #T T #T T T T
         T #T T #T T T T #T T #T T T #T T T #T T #T T T #T T #T #T T T T T T #T T T T T #T T                          #T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T T #T T T #T T #T T T #T T #T T T                          #T T #T T #T T T #T T T #T T T #T #T T T #T T #T T T #T T #T T T #T T T #T #T T T T T T T #T                          T T T T T T T T T #T T T T T T T T T T #T T T T T #T #T T T T #T T T #T T #T T #T T T T #T T                          #T T #T T T #T T #T T #T T #T T T #T T #T T #T T T T #T T #T T T #T T #T T T #T T #T T #T T                          T #T T #T T T T T T T T T T #T T T T T T T T T
         T #T T T T T T T T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T                          T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T T #                         T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T                          T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T #T T                          T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #                         T T #T T T #T
         514.6 KiB/s
done
Bytes transferred = 18108224 (1144f40 hex)
get filesize 0x1144f40
ECNT> bootm
bootm flag=0, states=70f
## Loading kernel from FIT Image at 84fc8f18 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM OpenWrt Linux-6.12.69
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x84fc8ffc
     Data Size:    18090116 Bytes = 17.3 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   97fc8164
     Hash algo:    sha1
     Hash value:   e160aeee9669e62f30e71c4d8031664feeee82a4
## Loading fdt from FIT Image at 84fc8f18 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM OpenWrt tplink_xx230v device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x861099b8
     Data Size:    16735 Bytes = 16.3 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   708e7995
     Hash algo:    sha1
     Hash value:   186c1570a6ee96891027d012a7777c8cd807f734
   Booting using the fdt blob at 0x861099b8
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 9cde8000, end 9cdef15e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.12.69 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnu                         eabi-gcc (OpenWrt GCC 14.3.0 r32986-9259a541a4) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Su                         n Feb  8 02:36:17 2026
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link xx230v
[    0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[    0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8')
[    0.000000] printk: legacy bootconsole [ns16550] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'npu_bina                         ry@84000000': base 0x84000000, size 10 MiB
[    0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'qdma0-bu                         f@86206800': base 0x84a00000, size 8 MiB
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080200000-0x000000009fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080200000-0x00000000851fffff]
[    0.000000]   node   0: [mem 0x0000000085200000-0x0000000086ffffff]
[    0.000000]   node   0: [mem 0x0000000087000000-0x000000009fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff]
[    0.000000] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@8000                         0000
[    0.000000] OF: reserved mem: 0x84000000..0x849fffff (10240 KiB) nomap non-reusable npu_bi                         nary@84000000
[    0.000000] OF: reserved mem: 0x84a00000..0x851fffff (8192 KiB) nomap non-reusable qdma0-b                         uf@86206800
[    0.000000] OF: reserved mem: 0x85200000..0x859fffff (8192 KiB) nomap non-reusable qdma1-b                         uf@86a06800
[    0.000000] OF: reserved mem: 0x85a00000..0x86ffffff (22528 KiB) nomap non-reusable npu-pk                         t@84a00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344
[    0.000000] Kernel command line: console=ttyS0,115200 earlycon
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130560
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task                         _cpu_ids=2.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5,                          max_idle_ns: 440795202646 ns
[    0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.008800] Switching to timer-based delay loop, resolution 40ns
[    0.015569] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.                         00 BogoMIPS (lpj=250000)
[    0.026958] CPU: Testing write buffer coherency: ok
[    0.032349] pid_max: default: 32768 minimum: 301
[    0.044087] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.052138] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.063670] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.070882] Setting up static identity map for 0x80300000 - 0x80300060
[    0.078240] rcu: Hierarchical SRCU implementation.
[    0.083511] rcu:     Max phase no-delay instances is 1000.
[    0.089526] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.098728] smp: Bringing up secondary CPUs ...
[    0.118780] GICv3: CPU1: found redistributor 1 region 0:0x090a0000
[    0.118836] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.118983] smp: Brought up 1 node, 2 CPUs
[    0.136489] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.143389] CPU: All CPU(s) started in SVC mode.
[    0.148897] Memory: 407540K/522240K available (7863K kernel code, 601K rwdata, 2056K rodat                         a, 66560K init, 220K bss, 113568K reserved, 0K cma-reserved)
[    0.168598] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19                         112604462750000 ns
[    0.179460] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.190338] pinctrl core: initialized pinctrl subsystem
[    0.197867] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.204666] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.212972] thermal_sys: Registered thermal governor 'step_wise'
[    0.213054] cpuidle: using governor menu
[    0.226333] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-contro                         ller
[    0.236193] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-contro                         ller
[    0.256319] SCSI subsystem initialized
[    0.260660] usbcore: registered new interface driver usbfs
[    0.266768] usbcore: registered new interface driver hub
[    0.272633] usbcore: registered new device driver usb
[    0.278345] Advanced Linux Sound Architecture Driver Initialized.
[    0.286481] clocksource: Switched to clocksource arch_sys_counter
[    0.299281] NET: Registered PF_INET protocol family
[    0.304848] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.313780] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear                         )
[    0.323040] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.331569] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.340120] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.348065] TCP: Hash tables configured (established 4096 bind 4096)
[    0.355424] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.363647] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.370868] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.378977] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.385233] PCI: CLS 0 bytes, default 64
[    0.390994] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.400000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.406485] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2                         006 Red Hat, Inc.
[    0.423975] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges:
[    0.431291] mtk-pcie 1fa91000.pcie:      MEM 0x0020000000..0x0021ffffff -> 0x0020000000
[    0.965006] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00
[    0.971865] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.977934] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff]
[    0.985716] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port
[    0.993948] pci 0000:00:00.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000)
[    1.002860] pci 0000:00:00.0: BAR 0 [mem size 0x00000001 64bit pref disabled]
[    1.010779] pci 0000:00:00.0: PCI bridge to [bus 00]
[    1.016297] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.026147] PCI: bus0: Fast back to back transfers disabled
[    1.032334] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.041787] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 PCIe Endpoint
[    1.049941] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref]
[    1.057651] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
[    1.064828] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref]
[    1.073101] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.080154] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCI                         e x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    1.097146] PCI: bus1: Fast back to back transfers disabled
[    1.103273] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.110636] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]: assigned
[    1.118887] pci 0000:00:00.0: BAR 0 [mem 0x20200000 64bit pref disabled]: assigned
[    1.127268] pci 0000:00:00.0: BAR 0: error updating (0x2020000c != 0x0000000c)
[    1.135244] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff 64bit pref]: assigned
[    1.143844] pci 0000:01:00.0: BAR 2 [mem 0x20100000-0x20107fff 64bit]: assigned
[    1.151961] pci 0000:01:00.0: BAR 4 [mem 0x20108000-0x20108fff 64bit pref]: assigned
[    1.160565] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.166055] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
[    1.173590] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff]
[    1.180488] pci_bus 0000:01: resource 1 [mem 0x20000000-0x201fffff]
[    1.187593] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.195038] pcieport 0000:00:00.0: PME: Signaling with IRQ 30
[    1.202319] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges:
[    1.209597] mtk-pcie 1fa92000.pcie:      MEM 0x0022000000..0x0023ffffff -> 0x0022000000
[    1.367397] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00
[    1.374205] pci_bus 0001:00: root bus resource [bus 00-ff]
[    1.380269] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff]
[    1.388178] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port
[    1.396392] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000)
[    1.405303] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled]
[    1.413227] pci 0001:00:01.0: PCI bridge to [bus 00]
[    1.418760] pci 0001:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.428602] PCI: bus0: Fast back to back transfers disabled
[    1.434751] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.444275] pci 0001:01:00.0: [14c3:7906] type 00 class 0x028000 PCIe Endpoint
[    1.452442] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref]
[    1.460119] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
[    1.467303] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref]
[    1.475562] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    1.482618] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCI                         e x1 link at 0001:00:01.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[    1.499647] PCI: bus1: Fast back to back transfers disabled
[    1.505773] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    1.513127] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned
[    1.521376] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned
[    1.529750] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c)
[    1.537744] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned
[    1.546334] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22107fff 64bit]: assigned
[    1.554455] pci 0001:01:00.0: BAR 4 [mem 0x22108000-0x22108fff 64bit pref]: assigned
[    1.563054] pci 0001:00:01.0: PCI bridge to [bus 01]
[    1.568547] pci 0001:00:01.0:   bridge window [mem 0x22000000-0x221fffff]
[    1.576072] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff]
[    1.582965] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff]
[    1.590077] pcieport 0001:00:01.0: enabling device (0140 -> 0142)
[    1.597586] pcieport 0001:00:01.0: PME: Signaling with IRQ 32
[    1.605402] airoha_hsdma 1fa01800.hsdma: Airoha HSDMA driver registered
[    1.613142] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.621073] printk: legacy console [ttyS0] disabled
[    1.627049] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 34, base_baud = 115200) is a                          16550
[    1.636698] printk: legacy console [ttyS0] enabled
[    1.636698] printk: legacy console [ttyS0] enabled
[    1.646777] printk: legacy bootconsole [ns16550] disabled
[    1.646777] printk: legacy bootconsole [ns16550] disabled
[    1.660028] random: crng init done
[    1.661413] spi-nand spi0.0: ESMT SPI NAND was found.
[    1.668565] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[    1.689475] 7 fixed-partitions partitions found on MTD device spi0.0
[    1.695862] Creating 7 MTD partitions on "spi0.0":
[    1.700726] 0x000000000000-0x000000080000 : "bootloader"
[    1.707754] 0x000000080000-0x000000120000 : "romfile"
[    1.715282] 0x0000000a0000-0x000000240000 : "misc"
[    1.723314] 0x0000001a0000-0x0000011a0000 : "kernel"
[    1.762061] 0x0000011a0000-0x0000011a0001 : "rootfs_dummy"
[    1.768743] 0x0000011a0000-0x000007500000 : "rootfs"
[    1.986619] mtd: setting mtd5 (rootfs) as root device
[    1.992051] mtdsplit: no squashfs found in "rootfs"
[    1.996998] 0x000007500000-0x000008000000 : "reserved_bmt"
[    2.108763] airoha-npu 1e900000.npu: L2C sram size: 0x00
[    2.114096] airoha-npu 1e900000.npu: FPGA Stage: 1
[C1]core freq at 333000000 Hz
[C1]timer_init: Timer clk is run[ing at 125 Mhz
[C1]core1_main
    2.443048] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibrati                         on.
[    2.459377] xhci-mtk 1fab0000.usb: xHCI Host Controller
[    2.464636] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1
[    2.476035] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x000000                         0000200010
[    2.485253] xhci-mtk 1fab0000.usb: irq 47, io mem 0x1fab0000
[    2.491082] xhci-mtk 1fab0000.usb: xHCI Host Controller
[    2.496321] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2
[    2.503759] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    2.511518] hub 1-0:1.0: USB hub found
[    2.515429] hub 1-0:1.0: 2 ports detected
[    2.520228] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.529041] hub 2-0:1.0: USB hub found
[    2.532953] hub 2-0:1.0: 1 port detected
[    2.537734] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz
[    2.556008] en7523-audio 1fbe2200.audio-controller: mtk_afe_combine_sub_dai(), num of dai                          2
[    2.564919] debugfs: Directory '1fbe2200.audio-controller' with parent 'en7523-i2s' alread                         y present!
[    2.574919] NET: Registered PF_INET6 protocol family
[    2.581157] Segment Routing with IPv6
[    2.584880] In-situ OAM (IOAM) with IPv6
[    2.588940] NET: Registered PF_PACKET protocol family
[    2.594255] 8021q: 802.1Q VLAN Support v1.8
[    2.598605] Registering SWP/SWPB emulation handler
[    2.690815] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode
[    2.698611] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Ai                         roha EN7523 PHY] (irq=POLL)
[    2.710160] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Ai                         roha EN7523 PHY] (irq=POLL)
[    2.721651] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Ai                         roha EN7523 PHY] (irq=POLL)
[    2.733110] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Air                         oha EN7523 PHY] (irq=POLL)
[    2.744522] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode
[    2.751311] DSA: tree 0 setup
[    2.754605] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
[    2.763016] clk: Disabling unused clocks
[    2.767044] PM: genpd: Disabling unused power domains
[    2.772119] ALSA device list:
[    2.775092]   #0: en7523-i2s
[    2.844648] Freeing unused kernel image (initmem) memory: 66560K
[    2.850978] Run /init as init process
[    3.502455] init: Console is alive
[    3.506092] init: - watchdog -
[    3.521972] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.538440] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    3.562991] usbcore: registered new interface driver usb-storage
[    3.578478] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.592007] init: - preinit -
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    4.961930] procd: - early -
[    4.964971] procd: - watchdog -
[    5.499959] procd: - watchdog -
[    5.503349] procd: - ubus -
[    5.559601] procd: - init -
Please press Enter to activate this console.
[    5.944612] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.270788] i2c_dev: i2c /dev entries driver
[    6.282309] ntfs3: Enabled Linux POSIX ACLs support
[    6.301248] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357
[    6.308534] Backport generated by backports.git c8a37ce
[    6.428559] usbcore: registered new interface driver ums-alauda
[    6.435558] usbcore: registered new interface driver ums-cypress
[    6.467721] usbcore: registered new interface driver ums-datafab
[    6.474819] usbcore: registered new interface driver ums-freecom
[    6.507611] usbcore: registered new interface driver ums-isd200
[    6.515170] usbcore: registered new interface driver ums-jumpshot
[    6.537560] usbcore: registered new interface driver ums-karma
[    6.545287] usbcore: registered new interface driver ums-sddr09
[    6.564347] urngd: v1.0.2 started.
[    6.569170] usbcore: registered new interface driver ums-sddr55
[    6.576795] usbcore: registered new interface driver ums-usbat
[    6.628499] xt_time: kernel timezone is -0000
[    6.753219] mt7915e_hif 0000:01:00.0: enabling device (0140 -> 0142)
[    6.760063] mt7915e 0001:01:00.0: enabling device (0140 -> 0142)
[    6.947452] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240823172725a
[    6.970313] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240823172                         741
[    7.054381] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240823172                         837
[    7.397498] mt7915e 0001:01:00.0: eeprom load fail, use default bin
[    7.403872] mt7915e 0001:01:00.0: Direct firmware load for mediatek/mt7916_eeprom.bin fail                         ed with error -2
[    7.413566] mt7915e 0001:01:00.0: Falling back to sysfs fallback for: mediatek/mt7916_eepr                         om.bin
[    7.434071] mt7915e 0001:01:00.0: probe with driver mt7915e failed with error -12
[    7.466054] PPP generic driver version 2.4.2
[    7.471788] NET: Registered PF_PPPOX protocol family
[    7.487206] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    7.495050] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All R                         ights Reserved.
[    7.516317] kmodloader: done loading kernel modules from /etc/modules.d/*
[   23.348343] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode
[   23.361483] br-lan: port 1(lan1) entered blocking state
[   23.366846] br-lan: port 1(lan1) entered disabled state
[   23.372172] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode
[   23.378941] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode
[   23.386039] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode
[   23.417848] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode
[   23.427267] br-lan: port 2(lan2) entered blocking state
[   23.432544] br-lan: port 2(lan2) entered disabled state
[   23.438003] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode
[   23.444998] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode
[   23.458295] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode
[   23.467462] br-lan: port 3(lan3) entered blocking state
[   23.472725] br-lan: port 3(lan3) entered disabled state
[   23.478088] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode
[   23.485051] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode
[   23.525919] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode
[   27.517925] mt7530-mmio 1fb58000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   27.527059] br-lan: port 1(lan1) entered blocking state
[   27.532303] br-lan: port 1(lan1) entered forwarding state

``` EN7523DRAMC V0.6 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=512MB U-Boot 2014.04-rc1 (Sep 02 2025 - 02:26:44) DRAM: 496 MiB EN7529CT Now running in RAM - U-Boot at: 9edf7000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:9ee3dba0 Net: ecnt_eth Uip activated use flash mac: BC: 7:1D:7A:B2:B8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 489: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: bc:07:1d:7a:b2:b8 [ os_initCPEInfo ] 382: hw ver: XX530v v1.0 00000001 [ os_initCPEInfo ] 383: sw ver: 0.8.0 3.0.0 v6096 [ os_initCPEInfo ] 390: sn: 22515X8006387 [ os_initCPEInfo ] 393: pin: 70041675 [ os_initCPEInfo ] 400: endian: 0 [ os_initCPEInfo ] 403: acFlag: 0 [ os_getFullResetAndReconfigPermission ] 288: no vaild isp config, allow to fullreset of con fig [ CPEinit ] 513: CPE is idle Hit any key to stop autoboot: 0 ECNT> setenv loadaddr 0x84fc8f18 ECNT> tftpboot 192.168.1.100:openwrt.bin use flash mac: BC: 7:1D:7A:B2:B8 use flash mac: BC: 7:1D:7A:B2:B8 Using ecnt_eth device TFTP from server 192.168.1.100; our IP address is 192.168.1.1 Filename 'openwrt.bin'. Load addr ess: 0x84fc8f18 Loading: T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T # T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T #T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T T #T T T T T T T T T T T #T T T T T T #T T T #T T #T T #T #T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T # T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T T T #T T #T T T #T T T T T #T T T T T T T T T T #T T T T T T T #T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T #T T #T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T T T #T T T #T T # T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T #T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T #T T T T T T T T T T #T T T T T T T T T T #T #T T T #T T #T T # T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T #T T T T T T T T T #T T #T T T T #T T T T T T T T T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T T #T T T T T T T T #T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T #T T T #T T T T T T T #T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:2 There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:1 There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:0 #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T #T T #T #T T #T T T #T T T #T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T T T T #T T #T #T T T T T T T #T T T T T T T T T T #T T T T T #T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T # T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T #T T T T T #T T T T T #T T T #T T #T T T T T T T T T T #T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T T #T T T T #T T # T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9ee c7a30 TIMEs:2 There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:1 There is no data available in IRQ queue. irq value:ffffffff, irq ptr:9eec7a30 TIMEs:0 T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T #T T T T #T T #T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T T T T #T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T T T T #T T T T T T T #T T T T T T T T #T T T T T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T # T T #T T #T T #T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T #T T T T T T #T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T # T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T# T T T #T T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T T #T T #T T #T T T # T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T #T T T #T T #T T T #T # T T T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T T #T T #T T T #T T #T T T #T T #T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T T T T #T T T T T T #T T T T T T T T T #T T T T T T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T #T T T #T T #T T T #T #T T T #T T T #T T #T T T #T T T T T T T T T T #T T T T T T #T T T T T T T T T #T T T #T T T #T T T T #T T #T T #T T T #T T # T T T #T T #T T T #T T T #T T T #T T #T T #T T T #T T T #T T T #T T T #T T T T #T T #T T T #T T T T T T T #T T T T T T T T #T T T T T T T T T T #T T T #T T #T T T T T #T T #T #T T T T #T T T #T T #T T #T T T #T T #T #T T T #T T T #T T T #T T #T T T #T T #T T T T #T T T #T T T #T T T T #T T #T #T T T T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T #T T T #T T T T #T T #T T # T T #T T T #T #T T #T T T #T T #T T T #T T #T T #T #T T T T #T T T #T #T T T #T T T T T T T # T T T T T T T T T T #T T T T T T T T T T #T T T T #T T T #T T #T T T #T T #T T T #T T #T T T T #T T #T T #T T T T T #T T #T T T T #T T #T T T #T T T #T T #T T T #T T #T #T T T T T T #T T T T T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T #T T T #T #T T T #T T #T T T #T T #T T T #T T T #T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T #T T T T #T T T #T T #T T #T T T T #T T #T T #T T T #T T #T T #T T #T T T #T T #T T #T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T T # T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T # T T #T T T #T 514.6 KiB/s done Bytes transferred = 18108224 (1144f40 hex) get filesize 0x1144f40 ECNT> bootm bootm flag=0, states=70f ## Loading kernel from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.69 Type: Kernel Image Compression: lzma compressed Data Start: 0x84fc8ffc Data Size: 18090116 Bytes = 17.3 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 97fc8164 Hash algo: sha1 Hash value: e160aeee9669e62f30e71c4d8031664feeee82a4 ## Loading fdt from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x861099b8 Data Size: 16735 Bytes = 16.3 KiB Architecture: ARM Hash algo: crc32 Hash value: 708e7995 Hash algo: sha1 Hash value: 186c1570a6ee96891027d012a7777c8cd807f734 Booting using the fdt blob at 0x861099b8 Uncompressing Kernel Image ... OK Loading Device Tree to 9cde8000, end 9cdef15e ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.69 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnu eabi-gcc (OpenWrt GCC 14.3.0 r32986-9259a541a4) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Su n Feb 8 02:36:17 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TP-Link xx230v [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'npu_bina ry@84000000': base 0x84000000, size 10 MiB [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'qdma0-bu f@86206800': base 0x84a00000, size 8 MiB [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x00000000851fffff] [ 0.000000] node 0: [mem 0x0000000085200000-0x0000000086ffffff] [ 0.000000] node 0: [mem 0x0000000087000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@8000 0000 [ 0.000000] OF: reserved mem: 0x84000000..0x849fffff (10240 KiB) nomap non-reusable npu_bi nary@84000000 [ 0.000000] OF: reserved mem: 0x84a00000..0x851fffff (8192 KiB) nomap non-reusable qdma0-b uf@86206800 [ 0.000000] OF: reserved mem: 0x85200000..0x859fffff (8192 KiB) nomap non-reusable qdma1-b uf@86a06800 [ 0.000000] OF: reserved mem: 0x85a00000..0x86ffffff (22528 KiB) nomap non-reusable npu-pk t@84a00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task _cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008800] Switching to timer-based delay loop, resolution 40ns [ 0.015569] Calibrating delay loop (skipped), value calculated using timer frequency.. 50. 00 BogoMIPS (lpj=250000) [ 0.026958] CPU: Testing write buffer coherency: ok [ 0.032349] pid_max: default: 32768 minimum: 301 [ 0.044087] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052138] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063670] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070882] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.078240] rcu: Hierarchical SRCU implementation. [ 0.083511] rcu: Max phase no-delay instances is 1000. [ 0.089526] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.098728] smp: Bringing up secondary CPUs ... [ 0.118780] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.118836] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.118983] smp: Brought up 1 node, 2 CPUs [ 0.136489] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.143389] CPU: All CPU(s) started in SVC mode. [ 0.148897] Memory: 407540K/522240K available (7863K kernel code, 601K rwdata, 2056K rodat a, 66560K init, 220K bss, 113568K reserved, 0K cma-reserved) [ 0.168598] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19 112604462750000 ns [ 0.179460] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.190338] pinctrl core: initialized pinctrl subsystem [ 0.197867] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.204666] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.212972] thermal_sys: Registered thermal governor 'step_wise' [ 0.213054] cpuidle: using governor menu [ 0.226333] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-contro ller [ 0.236193] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-contro ller [ 0.256319] SCSI subsystem initialized [ 0.260660] usbcore: registered new interface driver usbfs [ 0.266768] usbcore: registered new interface driver hub [ 0.272633] usbcore: registered new device driver usb [ 0.278345] Advanced Linux Sound Architecture Driver Initialized. [ 0.286481] clocksource: Switched to clocksource arch_sys_counter [ 0.299281] NET: Registered PF_INET protocol family [ 0.304848] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.313780] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear ) [ 0.323040] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.331569] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.340120] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.348065] TCP: Hash tables configured (established 4096 bind 4096) [ 0.355424] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.363647] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.370868] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.378977] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.385233] PCI: CLS 0 bytes, default 64 [ 0.390994] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.400000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.406485] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2 006 Red Hat, Inc. [ 0.423975] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.431291] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 0.965006] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 0.971865] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.977934] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 0.985716] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port [ 0.993948] pci 0000:00:00.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.002860] pci 0000:00:00.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.010779] pci 0000:00:00.0: PCI bridge to [bus 00] [ 1.016297] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 1.026147] PCI: bus0: Fast back to back transfers disabled [ 1.032334] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.041787] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 PCIe Endpoint [ 1.049941] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.057651] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.064828] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.073101] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.080154] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCI e x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.097146] PCI: bus1: Fast back to back transfers disabled [ 1.103273] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.110636] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]: assigned [ 1.118887] pci 0000:00:00.0: BAR 0 [mem 0x20200000 64bit pref disabled]: assigned [ 1.127268] pci 0000:00:00.0: BAR 0: error updating (0x2020000c != 0x0000000c) [ 1.135244] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff 64bit pref]: assigned [ 1.143844] pci 0000:01:00.0: BAR 2 [mem 0x20100000-0x20107fff 64bit]: assigned [ 1.151961] pci 0000:01:00.0: BAR 4 [mem 0x20108000-0x20108fff 64bit pref]: assigned [ 1.160565] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.166055] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 1.173590] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.180488] pci_bus 0000:01: resource 1 [mem 0x20000000-0x201fffff] [ 1.187593] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.195038] pcieport 0000:00:00.0: PME: Signaling with IRQ 30 [ 1.202319] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.209597] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.367397] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.374205] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.380269] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.388178] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.396392] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.405303] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.413227] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.418760] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.428602] PCI: bus0: Fast back to back transfers disabled [ 1.434751] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.444275] pci 0001:01:00.0: [14c3:7906] type 00 class 0x028000 PCIe Endpoint [ 1.452442] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.460119] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.467303] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.475562] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 1.482618] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCI e x1 link at 0001:00:01.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 1.499647] PCI: bus1: Fast back to back transfers disabled [ 1.505773] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.513127] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 1.521376] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 1.529750] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 1.537744] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 1.546334] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22107fff 64bit]: assigned [ 1.554455] pci 0001:01:00.0: BAR 4 [mem 0x22108000-0x22108fff 64bit pref]: assigned [ 1.563054] pci 0001:00:01.0: PCI bridge to [bus 01] [ 1.568547] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 1.576072] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 1.582965] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 1.590077] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 1.597586] pcieport 0001:00:01.0: PME: Signaling with IRQ 32 [ 1.605402] airoha_hsdma 1fa01800.hsdma: Airoha HSDMA driver registered [ 1.613142] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.621073] printk: legacy console [ttyS0] disabled [ 1.627049] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 34, base_baud = 115200) is a 16550 [ 1.636698] printk: legacy console [ttyS0] enabled [ 1.636698] printk: legacy console [ttyS0] enabled [ 1.646777] printk: legacy bootconsole [ns16550] disabled [ 1.646777] printk: legacy bootconsole [ns16550] disabled [ 1.660028] random: crng init done [ 1.661413] spi-nand spi0.0: ESMT SPI NAND was found. [ 1.668565] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 1.689475] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.695862] Creating 7 MTD partitions on "spi0.0": [ 1.700726] 0x000000000000-0x000000080000 : "bootloader" [ 1.707754] 0x000000080000-0x000000120000 : "romfile" [ 1.715282] 0x0000000a0000-0x000000240000 : "misc" [ 1.723314] 0x0000001a0000-0x0000011a0000 : "kernel" [ 1.762061] 0x0000011a0000-0x0000011a0001 : "rootfs_dummy" [ 1.768743] 0x0000011a0000-0x000007500000 : "rootfs" [ 1.986619] mtd: setting mtd5 (rootfs) as root device [ 1.992051] mtdsplit: no squashfs found in "rootfs" [ 1.996998] 0x000007500000-0x000008000000 : "reserved_bmt" [ 2.108763] airoha-npu 1e900000.npu: L2C sram size: 0x00 [ 2.114096] airoha-npu 1e900000.npu: FPGA Stage: 1 [C1]core freq at 333000000 Hz [C1]timer_init: Timer clk is run[ing at 125 Mhz [C1]core1_main 2.443048] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibrati on. [ 2.459377] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 2.464636] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1 [ 2.476035] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x000000 0000200010 [ 2.485253] xhci-mtk 1fab0000.usb: irq 47, io mem 0x1fab0000 [ 2.491082] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 2.496321] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2 [ 2.503759] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 2.511518] hub 1-0:1.0: USB hub found [ 2.515429] hub 1-0:1.0: 2 ports detected [ 2.520228] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.529041] hub 2-0:1.0: USB hub found [ 2.532953] hub 2-0:1.0: 1 port detected [ 2.537734] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz [ 2.556008] en7523-audio 1fbe2200.audio-controller: mtk_afe_combine_sub_dai(), num of dai 2 [ 2.564919] debugfs: Directory '1fbe2200.audio-controller' with parent 'en7523-i2s' alread y present! [ 2.574919] NET: Registered PF_INET6 protocol family [ 2.581157] Segment Routing with IPv6 [ 2.584880] In-situ OAM (IOAM) with IPv6 [ 2.588940] NET: Registered PF_PACKET protocol family [ 2.594255] 8021q: 802.1Q VLAN Support v1.8 [ 2.598605] Registering SWP/SWPB emulation handler [ 2.690815] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode [ 2.698611] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Ai roha EN7523 PHY] (irq=POLL) [ 2.710160] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Ai roha EN7523 PHY] (irq=POLL) [ 2.721651] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Ai roha EN7523 PHY] (irq=POLL) [ 2.733110] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Air oha EN7523 PHY] (irq=POLL) [ 2.744522] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode [ 2.751311] DSA: tree 0 setup [ 2.754605] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx [ 2.763016] clk: Disabling unused clocks [ 2.767044] PM: genpd: Disabling unused power domains [ 2.772119] ALSA device list: [ 2.775092] #0: en7523-i2s [ 2.844648] Freeing unused kernel image (initmem) memory: 66560K [ 2.850978] Run /init as init process [ 3.502455] init: Console is alive [ 3.506092] init: - watchdog - [ 3.521972] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.538440] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.562991] usbcore: registered new interface driver usb-storage [ 3.578478] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.592007] init: - preinit - Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 4.961930] procd: - early - [ 4.964971] procd: - watchdog - [ 5.499959] procd: - watchdog - [ 5.503349] procd: - ubus - [ 5.559601] procd: - init - Please press Enter to activate this console. [ 5.944612] kmodloader: loading kernel modules from /etc/modules.d/* [ 6.270788] i2c_dev: i2c /dev entries driver [ 6.282309] ntfs3: Enabled Linux POSIX ACLs support [ 6.301248] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357 [ 6.308534] Backport generated by backports.git c8a37ce [ 6.428559] usbcore: registered new interface driver ums-alauda [ 6.435558] usbcore: registered new interface driver ums-cypress [ 6.467721] usbcore: registered new interface driver ums-datafab [ 6.474819] usbcore: registered new interface driver ums-freecom [ 6.507611] usbcore: registered new interface driver ums-isd200 [ 6.515170] usbcore: registered new interface driver ums-jumpshot [ 6.537560] usbcore: registered new interface driver ums-karma [ 6.545287] usbcore: registered new interface driver ums-sddr09 [ 6.564347] urngd: v1.0.2 started. [ 6.569170] usbcore: registered new interface driver ums-sddr55 [ 6.576795] usbcore: registered new interface driver ums-usbat [ 6.628499] xt_time: kernel timezone is -0000 [ 6.753219] mt7915e_hif 0000:01:00.0: enabling device (0140 -> 0142) [ 6.760063] mt7915e 0001:01:00.0: enabling device (0140 -> 0142) [ 6.947452] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240823172725a [ 6.970313] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240823172 741 [ 7.054381] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240823172 837 [ 7.397498] mt7915e 0001:01:00.0: eeprom load fail, use default bin [ 7.403872] mt7915e 0001:01:00.0: Direct firmware load for mediatek/mt7916_eeprom.bin fail ed with error -2 [ 7.413566] mt7915e 0001:01:00.0: Falling back to sysfs fallback for: mediatek/mt7916_eepr om.bin [ 7.434071] mt7915e 0001:01:00.0: probe with driver mt7915e failed with error -12 [ 7.466054] PPP generic driver version 2.4.2 [ 7.471788] NET: Registered PF_PPPOX protocol family [ 7.487206] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 7.495050] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All R ights Reserved. [ 7.516317] kmodloader: done loading kernel modules from /etc/modules.d/* [ 23.348343] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode [ 23.361483] br-lan: port 1(lan1) entered blocking state [ 23.366846] br-lan: port 1(lan1) entered disabled state [ 23.372172] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode [ 23.378941] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode [ 23.386039] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode [ 23.417848] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode [ 23.427267] br-lan: port 2(lan2) entered blocking state [ 23.432544] br-lan: port 2(lan2) entered disabled state [ 23.438003] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode [ 23.444998] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode [ 23.458295] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode [ 23.467462] br-lan: port 3(lan3) entered blocking state [ 23.472725] br-lan: port 3(lan3) entered disabled state [ 23.478088] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode [ 23.485051] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode [ 23.525919] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode [ 27.517925] mt7530-mmio 1fb58000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx [ 27.527059] br-lan: port 1(lan1) entered blocking state [ 27.532303] br-lan: port 1(lan1) entered forwarding state ```

kvn193 commented 2026-02-09 00:59:37 +00:00

Author

Copy Link

Copy Source

EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=512MB


U-Boot 2014.04-rc1 (Sep 02 2025 - 02:26:44)

DRAM:  496 MiB
EN7529CT
Now running in RAM - U-Boot at: 9edf7000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash :  _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In:    serial
Out:   serial
Err:   serial
CPU0: found redistributor 0 region 0:9ee3dba0
Net:   ecnt_eth
               Uip activated
use flash mac: BC: 7:1D:7A:B2:B8
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 489:  CPE init
[ cp_initCommProto ] 277:  g_commProtoConfig.myMac: bc:07:1d:7a:b2:b8
[ os_initCPEInfo ] 382:  hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 383:  sw ver: 0.8.0 3.0.0 v6096
[ os_initCPEInfo ] 390:  sn: 22515X8006387
[ os_initCPEInfo ] 393:  pin: 70041675
[ os_initCPEInfo ] 400:  endian: 0
[ os_initCPEInfo ] 403:  acFlag: 0
[ os_getFullResetAndReconfigPermission ] 288:  no vaild isp config, allow to fullreset of config
[ CPEinit ] 513:  CPE is idle
Hit any key to stop autoboot:  0
ECNT> setenv loadaddr 0x84fc8f18
ECNT> tftpboot 192.168.1.100:openwrt.bin
use flash mac: BC: 7:1D:7A:B2:B8
use flash mac: BC: 7:1D:7A:B2:B8
Using ecnt_eth device
TFTP from server 192.168.1.100; our IP address is 192.168.1.1
                                                             Filename 'openwrt.bin'.
                                                                                    Load address: 0x84fc8f18
Loading: #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T #T T T T T T T T T T #T T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T T T T T T T #T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T
         #T T T #T T #T T T #T T #T T T #T #T T #T T #T T T #T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T T #T T
         #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T
         #T T #T T T #T T #T T #T T #T T #T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T
         T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T #T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T
         #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T #T #T T #T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T #T T T T T T T T T T #T T T T T T T
         #T T T #T T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T T T #T T T T #T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T #T T T T T T T #T T T T T T #T T T T T T T T T #T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T
         #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T T T T T T #T T T T T T T T T T T #T T T T T #T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T
         #T T #T #T T T T T T T T T #T T T T T T T T #T T T T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T #T T T #T #T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T T T T T T T T #T #T T #T T T #T T T T T T T T T T #T T T T T T T #T T T #T T #T T T #T T
         #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T
         #T T #T T T #T T #T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T #T #T T T T T T #T T T T T T T T T T #T T T T T T T #T T T T #T T #T T T #T T
         #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T #T T #T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T #T T T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T
         #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T T #T T
         #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T T T T T T #T T T T T T T T #T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T
         #T T #T T T #T T #T T T #T T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T T T #T T T T T T T T T #T #T T #T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T #T T T T T T T T T T #T T T T #T #T T
         #T T T T T T T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T #T T T T T T T #T T T T T T T T T T #T T T T T #T #T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T
         #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T T T T T T #T T T T T T T T T T #T #T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T
         #T T #T T T T T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T #T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T
         T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T
         1.6 GiB/s
done
Bytes transferred = 18108224 (1144f40 hex)
get filesize 0x1144f40
ECNT> bootm
bootm flag=0, states=70f
## Loading kernel from FIT Image at 84fc8f18 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM OpenWrt Linux-6.12.69
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x84fc8ffc
     Data Size:    18090116 Bytes = 17.3 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   97fc8164
     Hash algo:    sha1
     Hash value:   e160aeee9669e62f30e71c4d8031664feeee82a4
## Loading fdt from FIT Image at 84fc8f18 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM OpenWrt tplink_xx230v device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x861099b8
     Data Size:    16735 Bytes = 16.3 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   708e7995
     Hash algo:    sha1
     Hash value:   186c1570a6ee96891027d012a7777c8cd807f734
   Booting using the fdt blob at 0x861099b8
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 9cde8000, end 9cdef15e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.12.69 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 r32986-9259a541a4) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Sun Feb  8 02:36:17 2026
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link xx230v
[    0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[    0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8')
[    0.000000] printk: legacy bootconsole [ns16550] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'npu_binary@84000000': base 0x84000000, size 10 MiB
[    0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'qdma0-buf@86206800': base 0x84a00000, size 8 MiB
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080200000-0x000000009fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080200000-0x00000000851fffff]
[    0.000000]   node   0: [mem 0x0000000085200000-0x0000000086ffffff]
[    0.000000]   node   0: [mem 0x0000000087000000-0x000000009fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff]
[    0.000000] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000
[    0.000000] OF: reserved mem: 0x84000000..0x849fffff (10240 KiB) nomap non-reusable npu_binary@84000000
[    0.000000] OF: reserved mem: 0x84a00000..0x851fffff (8192 KiB) nomap non-reusable qdma0-buf@86206800
[    0.000000] OF: reserved mem: 0x85200000..0x859fffff (8192 KiB) nomap non-reusable qdma1-buf@86a06800
[    0.000000] OF: reserved mem: 0x85a00000..0x86ffffff (22528 KiB) nomap non-reusable npu-pkt@84a00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344
[    0.000000] Kernel command line: console=ttyS0,115200 earlycon
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130560
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.008800] Switching to timer-based delay loop, resolution 40ns
[    0.015570] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.026958] CPU: Testing write buffer coherency: ok
[    0.032350] pid_max: default: 32768 minimum: 301
[    0.044087] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.052139] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.063672] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.070885] Setting up static identity map for 0x80300000 - 0x80300060
[    0.078240] rcu: Hierarchical SRCU implementation.
[    0.083504] rcu:     Max phase no-delay instances is 1000.
[    0.089519] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.098723] smp: Bringing up secondary CPUs ...
[    0.118779] GICv3: CPU1: found redistributor 1 region 0:0x090a0000
[    0.118834] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.118980] smp: Brought up 1 node, 2 CPUs
[    0.136490] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.143389] CPU: All CPU(s) started in SVC mode.
[    0.148915] Memory: 407540K/522240K available (7863K kernel code, 601K rwdata, 2056K rodata, 66560K init, 220K bss, 113568K reserved, 0K cma-reserved)
[    0.168604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.179467] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.190330] pinctrl core: initialized pinctrl subsystem
[    0.197868] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.204669] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.212971] thermal_sys: Registered thermal governor 'step_wise'
[    0.213055] cpuidle: using governor menu
[    0.226315] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller
[    0.236175] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller
[    0.256300] SCSI subsystem initialized
[    0.260645] usbcore: registered new interface driver usbfs
[    0.266747] usbcore: registered new interface driver hub
[    0.272615] usbcore: registered new device driver usb
[    0.278333] Advanced Linux Sound Architecture Driver Initialized.
[    0.286273] clocksource: Switched to clocksource arch_sys_counter
[    0.299025] NET: Registered PF_INET protocol family
[    0.304563] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.313433] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.322689] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.331235] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.339790] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.347742] TCP: Hash tables configured (established 4096 bind 4096)
[    0.355116] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.363325] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.370532] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.378610] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.384860] PCI: CLS 0 bytes, default 64
[    0.390619] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.399783] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.406209] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.429450] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges:
[    0.436794] mtk-pcie 1fa91000.pcie:      MEM 0x0020000000..0x0021ffffff -> 0x0020000000
[    0.964851] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00
[    0.971710] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.977769] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff]
[    0.985553] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port
[    0.993778] pci 0000:00:00.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000)
[    1.002686] pci 0000:00:00.0: BAR 0 [mem size 0x00000001 64bit pref disabled]
[    1.010604] pci 0000:00:00.0: PCI bridge to [bus 00]
[    1.016123] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.025951] PCI: bus0: Fast back to back transfers disabled
[    1.032138] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.041603] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 PCIe Endpoint
[    1.049767] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref]
[    1.057453] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
[    1.064628] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref]
[    1.072899] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.079955] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    1.096966] PCI: bus1: Fast back to back transfers disabled
[    1.103090] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.110458] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]: assigned
[    1.118724] pci 0000:00:00.0: BAR 0 [mem 0x20200000 64bit pref disabled]: assigned
[    1.127106] pci 0000:00:00.0: BAR 0: error updating (0x2020000c != 0x0000000c)
[    1.135080] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff 64bit pref]: assigned
[    1.143680] pci 0000:01:00.0: BAR 2 [mem 0x20100000-0x20107fff 64bit]: assigned
[    1.151806] pci 0000:01:00.0: BAR 4 [mem 0x20108000-0x20108fff 64bit pref]: assigned
[    1.160410] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.165899] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
[    1.173435] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff]
[    1.180332] pci_bus 0000:01: resource 1 [mem 0x20000000-0x201fffff]
[    1.187450] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    1.194893] pcieport 0000:00:00.0: PME: Signaling with IRQ 30
[    1.202167] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges:
[    1.209411] mtk-pcie 1fa92000.pcie:      MEM 0x0022000000..0x0023ffffff -> 0x0022000000
[    1.367204] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00
[    1.374014] pci_bus 0001:00: root bus resource [bus 00-ff]
[    1.380085] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff]
[    1.387987] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port
[    1.396201] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000)
[    1.405121] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled]
[    1.413046] pci 0001:00:01.0: PCI bridge to [bus 00]
[    1.418572] pci 0001:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.428419] PCI: bus0: Fast back to back transfers disabled
[    1.434569] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.444095] pci 0001:01:00.0: [14c3:7906] type 00 class 0x028000 PCIe Endpoint
[    1.452242] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref]
[    1.459942] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
[    1.467141] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref]
[    1.475397] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    1.482445] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link)
[    1.499483] PCI: bus1: Fast back to back transfers disabled
[    1.505617] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    1.512980] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned
[    1.521232] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned
[    1.529612] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c)
[    1.537597] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned
[    1.546187] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22107fff 64bit]: assigned
[    1.554307] pci 0001:01:00.0: BAR 4 [mem 0x22108000-0x22108fff 64bit pref]: assigned
[    1.562906] pci 0001:00:01.0: PCI bridge to [bus 01]
[    1.568400] pci 0001:00:01.0:   bridge window [mem 0x22000000-0x221fffff]
[    1.575925] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff]
[    1.582823] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff]
[    1.589938] pcieport 0001:00:01.0: enabling device (0140 -> 0142)
[    1.597417] pcieport 0001:00:01.0: PME: Signaling with IRQ 32
[    1.605236] airoha_hsdma 1fa01800.hsdma: Airoha HSDMA driver registered
[    1.612945] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.620918] printk: legacy console [ttyS0] disabled
[    1.626875] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 34, base_baud = 115200) is a 16550
[    1.636536] printk: legacy console [ttyS0] enabled
[    1.636536] printk: legacy console [ttyS0] enabled
[    1.646617] printk: legacy bootconsole [ns16550] disabled
[    1.646617] printk: legacy bootconsole [ns16550] disabled
[    1.661433] spi-nand spi0.0: ESMT SPI NAND was found.
[    1.666611] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[    1.667221] random: crng init done
[    1.689398] 7 fixed-partitions partitions found on MTD device spi0.0
[    1.695783] Creating 7 MTD partitions on "spi0.0":
[    1.700643] 0x000000000000-0x000000080000 : "bootloader"
[    1.707693] 0x000000080000-0x000000120000 : "romfile"
[    1.715073] 0x0000000a0000-0x000000240000 : "misc"
[    1.723683] 0x0000001a0000-0x0000011a0000 : "kernel"
[    1.762304] 0x0000011a0000-0x0000011a0001 : "rootfs_dummy"
[    1.768863] 0x0000011a0000-0x000007500000 : "rootfs"
[    1.987243] mtd: setting mtd5 (rootfs) as root device
[    1.992688] mtdsplit: no squashfs found in "rootfs"
[    1.997637] 0x000007500000-0x000008000000 : "reserved_bmt"
[    2.108362] airoha-npu 1e900000.npu: L2C sram size: 0x00
[    2.113697] airoha-npu 1e900000.npu: FPGA Stage: 1
[C0]core freq at 333000000 Hz
[C0]timer_init: Timer clk is running at 32 Mhz
[C0]wcid_counter_init:0
[C0]wcid_counter_init:1
[C0][NPU] ba_node_init...
[C0]baNode_array_init
[C0]counter_init:2
[C0][NPU] queue_mutex_init...
[C0]qdma_init
[C1]core1_main
[    2.442853] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibration.
[    2.456050] xhci-mtk 1fab0000.usb: xHCI Host Controller
[    2.461330] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1
[    2.472738] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x0000000000200010
[    2.481958] xhci-mtk 1fab0000.usb: irq 47, io mem 0x1fab0000
[    2.487796] xhci-mtk 1fab0000.usb: xHCI Host Controller
[    2.493041] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2
[    2.500485] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    2.508254] hub 1-0:1.0: USB hub found
[    2.512166] hub 1-0:1.0: 2 ports detected
[    2.516931] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.525700] hub 2-0:1.0: USB hub found
[    2.529595] hub 2-0:1.0: 1 port detected
[    2.534293] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz
[    2.552438] en7523-audio 1fbe2200.audio-controller: mtk_afe_combine_sub_dai(), num of dai 2
[    2.561281] debugfs: Directory '1fbe2200.audio-controller' with parent 'en7523-i2s' already present!
[    2.571349] NET: Registered PF_INET6 protocol family
[    2.577741] Segment Routing with IPv6
[    2.581449] In-situ OAM (IOAM) with IPv6
[    2.585445] NET: Registered PF_PACKET protocol family
[    2.590753] 8021q: 802.1Q VLAN Support v1.8
[    2.595034] Registering SWP/SWPB emulation handler
[    2.690966] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode
[    2.698761] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Airoha EN7523 PHY] (irq=POLL)
[    2.710288] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Airoha EN7523 PHY] (irq=POLL)
[    2.721767] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Airoha EN7523 PHY] (irq=POLL)
[    2.733243] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Airoha EN7523 PHY] (irq=POLL)
[    2.744651] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode
[    2.751423] DSA: tree 0 setup
[    2.754688] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
[    2.763084] clk: Disabling unused clocks
[    2.767115] PM: genpd: Disabling unused power domains
[    2.772178] ALSA device list:
[    2.775144]   #0: en7523-i2s
[    2.844917] Freeing unused kernel image (initmem) memory: 66560K
[    2.851279] Run /init as init process
[    3.506719] init: Console is alive
[    3.510348] init: - watchdog -
[    3.525930] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.542036] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    3.575563] usbcore: registered new interface driver usb-storage
[    3.582394] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.595125] init: - preinit -
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    4.981767] procd: - early -
[    4.984806] procd: - watchdog -
[    5.517051] procd: - watchdog -
[    5.520441] procd: - ubus -
[    5.576466] procd: - init -
Please press Enter to activate this console.
[    5.960354] kmodloader: loading kernel modules from /etc/modules.d/*
[    6.281926] i2c_dev: i2c /dev entries driver
[    6.293111] ntfs3: Enabled Linux POSIX ACLs support
[    6.302057] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357
[    6.309374] Backport generated by backports.git c8a37ce
[    6.385218] usbcore: registered new interface driver ums-alauda
[    6.409661] usbcore: registered new interface driver ums-cypress
[    6.429233] usbcore: registered new interface driver ums-datafab
[    6.439473] usbcore: registered new interface driver ums-freecom
[    6.449246] usbcore: registered new interface driver ums-isd200
[    6.467576] usbcore: registered new interface driver ums-jumpshot
[    6.477462] usbcore: registered new interface driver ums-karma
[    6.484998] usbcore: registered new interface driver ums-sddr09
[    6.509307] usbcore: registered new interface driver ums-sddr55
[    6.516929] usbcore: registered new interface driver ums-usbat
[    6.561485] xt_time: kernel timezone is -0000
[    6.755199] mt7915e_hif 0000:01:00.0: enabling device (0140 -> 0142)
[    6.762708] mt7915e 0001:01:00.0: enabling device (0140 -> 0142)
[    6.867604] urngd: v1.0.2 started.
[    6.956873] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240823172725a
[    6.987679] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240823172741
[    7.051277] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240823172837
[    7.317111] mt7915e 0001:01:00.0: eeprom load fail, use default bin
[    7.323482] mt7915e 0001:01:00.0: Direct firmware load for mediatek/mt7916_eeprom.bin failed with error -2
[    7.333184] mt7915e 0001:01:00.0: Falling back to sysfs fallback for: mediatek/mt7916_eeprom.bin
[    7.368098] mt7915e 0001:01:00.0: probe with driver mt7915e failed with error -12
[    7.411921] PPP generic driver version 2.4.2
[    7.418172] NET: Registered PF_PPPOX protocol family
[    7.426980] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    7.434824] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    7.497882] kmodloader: done loading kernel modules from /etc/modules.d/*
[   34.108070] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode
[   34.132228] br-lan: port 1(lan1) entered blocking state
[   34.137627] br-lan: port 1(lan1) entered disabled state
[   34.142966] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode
[   34.149703] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode
[   34.156888] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode
[   34.191258] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode
[   34.200631] br-lan: port 2(lan2) entered blocking state
[   34.205900] br-lan: port 2(lan2) entered disabled state
[   34.211278] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode
[   34.218399] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode
[   34.230328] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode
[   34.239591] br-lan: port 3(lan3) entered blocking state
[   34.244868] br-lan: port 3(lan3) entered disabled state
[   34.250281] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode
[   34.257347] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode
[   34.297986] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode
[   38.307741] mt7530-mmio 1fb58000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   38.316888] br-lan: port 1(lan1) entered blocking state
[   38.322137] br-lan: port 1(lan1) entered forwarding state

``` EN7523DRAMC V0.6 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=512MB U-Boot 2014.04-rc1 (Sep 02 2025 - 02:26:44) DRAM: 496 MiB EN7529CT Now running in RAM - U-Boot at: 9edf7000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:9ee3dba0 Net: ecnt_eth Uip activated use flash mac: BC: 7:1D:7A:B2:B8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 489: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: bc:07:1d:7a:b2:b8 [ os_initCPEInfo ] 382: hw ver: XX530v v1.0 00000001 [ os_initCPEInfo ] 383: sw ver: 0.8.0 3.0.0 v6096 [ os_initCPEInfo ] 390: sn: 22515X8006387 [ os_initCPEInfo ] 393: pin: 70041675 [ os_initCPEInfo ] 400: endian: 0 [ os_initCPEInfo ] 403: acFlag: 0 [ os_getFullResetAndReconfigPermission ] 288: no vaild isp config, allow to fullreset of config [ CPEinit ] 513: CPE is idle Hit any key to stop autoboot: 0 ECNT> setenv loadaddr 0x84fc8f18 ECNT> tftpboot 192.168.1.100:openwrt.bin use flash mac: BC: 7:1D:7A:B2:B8 use flash mac: BC: 7:1D:7A:B2:B8 Using ecnt_eth device TFTP from server 192.168.1.100; our IP address is 192.168.1.1 Filename 'openwrt.bin'. Load address: 0x84fc8f18 Loading: #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T #T T T T T T T T T T #T T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T T T T T T T #T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T #T T T #T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T #T T #T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T #T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T #T #T T #T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T #T T T T T T T T T T #T T T T T T T #T T T #T T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T T T #T T T T #T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T #T T T T T T T #T T T T T T #T T T T T T T T T #T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T T T T T T #T T T T T T T T T T T #T T T T T #T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T #T T T T T T T T T #T T T T T T T T #T T T T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T #T T T #T #T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T T T T T T T T T #T #T T #T T T #T T T T T T T T T T #T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T #T #T T T T T T #T T T T T T T T T T #T T T T T T T #T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T #T T #T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T #T T T T T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T #T T T T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T T T T T T #T T T T T T T T #T T T T T T T #T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T T T #T T T T T T T T T #T #T T #T T T #T T T T T T T T T T #T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T #T #T T T T T T T T T T #T T T T #T #T T #T T T T T T T T #T T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T T #T T #T T T T T T T #T T T T T T T T T T #T T T T T #T #T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T #T T #T T T T T T T #T T T T T T T T T T #T #T T T T #T T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T #T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T T T #T T T T T T T T T T #T T T T T #T T T T T T T T T T #T T T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T T #T #T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T #T T #T T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T #T T T #T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T T T T T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T T T T T T T #T T T T T T T T T T #T T T T T T T T T T #T T T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T T #T T T #T T #T T T #T T #T T T #T T #T T #T T T #T 1.6 GiB/s done Bytes transferred = 18108224 (1144f40 hex) get filesize 0x1144f40 ECNT> bootm bootm flag=0, states=70f ## Loading kernel from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.69 Type: Kernel Image Compression: lzma compressed Data Start: 0x84fc8ffc Data Size: 18090116 Bytes = 17.3 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 97fc8164 Hash algo: sha1 Hash value: e160aeee9669e62f30e71c4d8031664feeee82a4 ## Loading fdt from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x861099b8 Data Size: 16735 Bytes = 16.3 KiB Architecture: ARM Hash algo: crc32 Hash value: 708e7995 Hash algo: sha1 Hash value: 186c1570a6ee96891027d012a7777c8cd807f734 Booting using the fdt blob at 0x861099b8 Uncompressing Kernel Image ... OK Loading Device Tree to 9cde8000, end 9cdef15e ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.69 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 r32986-9259a541a4) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Sun Feb 8 02:36:17 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TP-Link xx230v [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'npu_binary@84000000': base 0x84000000, size 10 MiB [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'qdma0-buf@86206800': base 0x84a00000, size 8 MiB [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x00000000851fffff] [ 0.000000] node 0: [mem 0x0000000085200000-0x0000000086ffffff] [ 0.000000] node 0: [mem 0x0000000087000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000 [ 0.000000] OF: reserved mem: 0x84000000..0x849fffff (10240 KiB) nomap non-reusable npu_binary@84000000 [ 0.000000] OF: reserved mem: 0x84a00000..0x851fffff (8192 KiB) nomap non-reusable qdma0-buf@86206800 [ 0.000000] OF: reserved mem: 0x85200000..0x859fffff (8192 KiB) nomap non-reusable qdma1-buf@86a06800 [ 0.000000] OF: reserved mem: 0x85a00000..0x86ffffff (22528 KiB) nomap non-reusable npu-pkt@84a00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008800] Switching to timer-based delay loop, resolution 40ns [ 0.015570] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.026958] CPU: Testing write buffer coherency: ok [ 0.032350] pid_max: default: 32768 minimum: 301 [ 0.044087] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052139] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063672] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070885] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.078240] rcu: Hierarchical SRCU implementation. [ 0.083504] rcu: Max phase no-delay instances is 1000. [ 0.089519] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.098723] smp: Bringing up secondary CPUs ... [ 0.118779] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.118834] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.118980] smp: Brought up 1 node, 2 CPUs [ 0.136490] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.143389] CPU: All CPU(s) started in SVC mode. [ 0.148915] Memory: 407540K/522240K available (7863K kernel code, 601K rwdata, 2056K rodata, 66560K init, 220K bss, 113568K reserved, 0K cma-reserved) [ 0.168604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.179467] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.190330] pinctrl core: initialized pinctrl subsystem [ 0.197868] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.204669] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.212971] thermal_sys: Registered thermal governor 'step_wise' [ 0.213055] cpuidle: using governor menu [ 0.226315] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller [ 0.236175] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller [ 0.256300] SCSI subsystem initialized [ 0.260645] usbcore: registered new interface driver usbfs [ 0.266747] usbcore: registered new interface driver hub [ 0.272615] usbcore: registered new device driver usb [ 0.278333] Advanced Linux Sound Architecture Driver Initialized. [ 0.286273] clocksource: Switched to clocksource arch_sys_counter [ 0.299025] NET: Registered PF_INET protocol family [ 0.304563] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.313433] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.322689] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.331235] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.339790] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.347742] TCP: Hash tables configured (established 4096 bind 4096) [ 0.355116] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.363325] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.370532] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.378610] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.384860] PCI: CLS 0 bytes, default 64 [ 0.390619] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.399783] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.406209] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.429450] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.436794] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 0.964851] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 0.971710] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.977769] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 0.985553] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port [ 0.993778] pci 0000:00:00.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.002686] pci 0000:00:00.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.010604] pci 0000:00:00.0: PCI bridge to [bus 00] [ 1.016123] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 1.025951] PCI: bus0: Fast back to back transfers disabled [ 1.032138] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.041603] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 PCIe Endpoint [ 1.049767] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.057453] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.064628] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.072899] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.079955] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.096966] PCI: bus1: Fast back to back transfers disabled [ 1.103090] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.110458] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]: assigned [ 1.118724] pci 0000:00:00.0: BAR 0 [mem 0x20200000 64bit pref disabled]: assigned [ 1.127106] pci 0000:00:00.0: BAR 0: error updating (0x2020000c != 0x0000000c) [ 1.135080] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff 64bit pref]: assigned [ 1.143680] pci 0000:01:00.0: BAR 2 [mem 0x20100000-0x20107fff 64bit]: assigned [ 1.151806] pci 0000:01:00.0: BAR 4 [mem 0x20108000-0x20108fff 64bit pref]: assigned [ 1.160410] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.165899] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 1.173435] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.180332] pci_bus 0000:01: resource 1 [mem 0x20000000-0x201fffff] [ 1.187450] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.194893] pcieport 0000:00:00.0: PME: Signaling with IRQ 30 [ 1.202167] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.209411] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.367204] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.374014] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.380085] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.387987] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.396201] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.405121] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.413046] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.418572] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.428419] PCI: bus0: Fast back to back transfers disabled [ 1.434569] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.444095] pci 0001:01:00.0: [14c3:7906] type 00 class 0x028000 PCIe Endpoint [ 1.452242] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.459942] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.467141] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.475397] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 1.482445] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 1.499483] PCI: bus1: Fast back to back transfers disabled [ 1.505617] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.512980] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 1.521232] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 1.529612] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 1.537597] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 1.546187] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22107fff 64bit]: assigned [ 1.554307] pci 0001:01:00.0: BAR 4 [mem 0x22108000-0x22108fff 64bit pref]: assigned [ 1.562906] pci 0001:00:01.0: PCI bridge to [bus 01] [ 1.568400] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 1.575925] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 1.582823] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 1.589938] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 1.597417] pcieport 0001:00:01.0: PME: Signaling with IRQ 32 [ 1.605236] airoha_hsdma 1fa01800.hsdma: Airoha HSDMA driver registered [ 1.612945] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.620918] printk: legacy console [ttyS0] disabled [ 1.626875] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 34, base_baud = 115200) is a 16550 [ 1.636536] printk: legacy console [ttyS0] enabled [ 1.636536] printk: legacy console [ttyS0] enabled [ 1.646617] printk: legacy bootconsole [ns16550] disabled [ 1.646617] printk: legacy bootconsole [ns16550] disabled [ 1.661433] spi-nand spi0.0: ESMT SPI NAND was found. [ 1.666611] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 1.667221] random: crng init done [ 1.689398] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.695783] Creating 7 MTD partitions on "spi0.0": [ 1.700643] 0x000000000000-0x000000080000 : "bootloader" [ 1.707693] 0x000000080000-0x000000120000 : "romfile" [ 1.715073] 0x0000000a0000-0x000000240000 : "misc" [ 1.723683] 0x0000001a0000-0x0000011a0000 : "kernel" [ 1.762304] 0x0000011a0000-0x0000011a0001 : "rootfs_dummy" [ 1.768863] 0x0000011a0000-0x000007500000 : "rootfs" [ 1.987243] mtd: setting mtd5 (rootfs) as root device [ 1.992688] mtdsplit: no squashfs found in "rootfs" [ 1.997637] 0x000007500000-0x000008000000 : "reserved_bmt" [ 2.108362] airoha-npu 1e900000.npu: L2C sram size: 0x00 [ 2.113697] airoha-npu 1e900000.npu: FPGA Stage: 1 [C0]core freq at 333000000 Hz [C0]timer_init: Timer clk is running at 32 Mhz [C0]wcid_counter_init:0 [C0]wcid_counter_init:1 [C0][NPU] ba_node_init... [C0]baNode_array_init [C0]counter_init:2 [C0][NPU] queue_mutex_init... [C0]qdma_init [C1]core1_main [ 2.442853] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibration. [ 2.456050] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 2.461330] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1 [ 2.472738] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x0000000000200010 [ 2.481958] xhci-mtk 1fab0000.usb: irq 47, io mem 0x1fab0000 [ 2.487796] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 2.493041] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2 [ 2.500485] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 2.508254] hub 1-0:1.0: USB hub found [ 2.512166] hub 1-0:1.0: 2 ports detected [ 2.516931] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.525700] hub 2-0:1.0: USB hub found [ 2.529595] hub 2-0:1.0: 1 port detected [ 2.534293] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz [ 2.552438] en7523-audio 1fbe2200.audio-controller: mtk_afe_combine_sub_dai(), num of dai 2 [ 2.561281] debugfs: Directory '1fbe2200.audio-controller' with parent 'en7523-i2s' already present! [ 2.571349] NET: Registered PF_INET6 protocol family [ 2.577741] Segment Routing with IPv6 [ 2.581449] In-situ OAM (IOAM) with IPv6 [ 2.585445] NET: Registered PF_PACKET protocol family [ 2.590753] 8021q: 802.1Q VLAN Support v1.8 [ 2.595034] Registering SWP/SWPB emulation handler [ 2.690966] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode [ 2.698761] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Airoha EN7523 PHY] (irq=POLL) [ 2.710288] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Airoha EN7523 PHY] (irq=POLL) [ 2.721767] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Airoha EN7523 PHY] (irq=POLL) [ 2.733243] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Airoha EN7523 PHY] (irq=POLL) [ 2.744651] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode [ 2.751423] DSA: tree 0 setup [ 2.754688] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx [ 2.763084] clk: Disabling unused clocks [ 2.767115] PM: genpd: Disabling unused power domains [ 2.772178] ALSA device list: [ 2.775144] #0: en7523-i2s [ 2.844917] Freeing unused kernel image (initmem) memory: 66560K [ 2.851279] Run /init as init process [ 3.506719] init: Console is alive [ 3.510348] init: - watchdog - [ 3.525930] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.542036] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.575563] usbcore: registered new interface driver usb-storage [ 3.582394] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.595125] init: - preinit - Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 4.981767] procd: - early - [ 4.984806] procd: - watchdog - [ 5.517051] procd: - watchdog - [ 5.520441] procd: - ubus - [ 5.576466] procd: - init - Please press Enter to activate this console. [ 5.960354] kmodloader: loading kernel modules from /etc/modules.d/* [ 6.281926] i2c_dev: i2c /dev entries driver [ 6.293111] ntfs3: Enabled Linux POSIX ACLs support [ 6.302057] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357 [ 6.309374] Backport generated by backports.git c8a37ce [ 6.385218] usbcore: registered new interface driver ums-alauda [ 6.409661] usbcore: registered new interface driver ums-cypress [ 6.429233] usbcore: registered new interface driver ums-datafab [ 6.439473] usbcore: registered new interface driver ums-freecom [ 6.449246] usbcore: registered new interface driver ums-isd200 [ 6.467576] usbcore: registered new interface driver ums-jumpshot [ 6.477462] usbcore: registered new interface driver ums-karma [ 6.484998] usbcore: registered new interface driver ums-sddr09 [ 6.509307] usbcore: registered new interface driver ums-sddr55 [ 6.516929] usbcore: registered new interface driver ums-usbat [ 6.561485] xt_time: kernel timezone is -0000 [ 6.755199] mt7915e_hif 0000:01:00.0: enabling device (0140 -> 0142) [ 6.762708] mt7915e 0001:01:00.0: enabling device (0140 -> 0142) [ 6.867604] urngd: v1.0.2 started. [ 6.956873] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240823172725a [ 6.987679] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240823172741 [ 7.051277] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240823172837 [ 7.317111] mt7915e 0001:01:00.0: eeprom load fail, use default bin [ 7.323482] mt7915e 0001:01:00.0: Direct firmware load for mediatek/mt7916_eeprom.bin failed with error -2 [ 7.333184] mt7915e 0001:01:00.0: Falling back to sysfs fallback for: mediatek/mt7916_eeprom.bin [ 7.368098] mt7915e 0001:01:00.0: probe with driver mt7915e failed with error -12 [ 7.411921] PPP generic driver version 2.4.2 [ 7.418172] NET: Registered PF_PPPOX protocol family [ 7.426980] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 7.434824] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 7.497882] kmodloader: done loading kernel modules from /etc/modules.d/* [ 34.108070] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode [ 34.132228] br-lan: port 1(lan1) entered blocking state [ 34.137627] br-lan: port 1(lan1) entered disabled state [ 34.142966] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode [ 34.149703] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode [ 34.156888] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode [ 34.191258] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode [ 34.200631] br-lan: port 2(lan2) entered blocking state [ 34.205900] br-lan: port 2(lan2) entered disabled state [ 34.211278] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode [ 34.218399] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode [ 34.230328] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode [ 34.239591] br-lan: port 3(lan3) entered blocking state [ 34.244868] br-lan: port 3(lan3) entered disabled state [ 34.250281] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode [ 34.257347] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode [ 34.297986] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode [ 38.307741] mt7530-mmio 1fb58000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.316888] br-lan: port 1(lan1) entered blocking state [ 38.322137] br-lan: port 1(lan1) entered forwarding state ```

Sirherobrine23 closed this issue 2026-02-10 02:33:47 +00:00

Sirherobrine23 reopened this issue 2026-02-11 00:58:20 +00:00

kvn193 commented 2026-02-11 00:58:54 +00:00

Author

Copy Link

Copy Source

EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x17, OCDN:0x1b, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=512MB


U-Boot 2014.04-rc1 (Sep 02 2025 - 02:26:44)

DRAM:  496 MiB
EN7529CT
Now running in RAM - U-Boot at: 9edf7000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash :  _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In:    serial
Out:   serial
Err:   serial
CPU0: found redistributor 0 region 0:9ee3dba0
Net:   ecnt_eth
               Uip activated
use flash mac: 98: 3:8E:33:C9:A8
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 489:  CPE init
[ cp_initCommProto ] 277:  g_commProtoConfig.myMac: 98:03:8e:33:c9:a8
[ os_initCPEInfo ] 382:  hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 383:  sw ver: 0.8.0 3.0.0 v6096
[ os_initCPEInfo ] 390:  sn: 22530A6000984
[ os_initCPEInfo ] 393:  pin: 13063269
[ os_initCPEInfo ] 400:  endian: 0
[ os_initCPEInfo ] 403:  acFlag: 0
[ os_getFullResetAndReconfigPermission ] 288:  no vaild isp config, allow to fullreset of config
[ CPEinit ] 513:  CPE is idle
Hit any key to stop autoboot:  0
Prepare to boot image0
bootm flag=0, states=70f
## Loading kernel from FIT Image at 81800200 ...
   Using 'conf@1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ECONET Linux kernel
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x818022a4
     Data Size:    2605567 Bytes = 2.5 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80088000
     Entry Point:  0x80088000
     Hash algo:    sha1
     Hash value:   38c0c7aaea6ae9e446728eb6d972007ca1a732d6
## Loading fdt from FIT Image at 81800200 ...
   Using 'conf@1' configuration
   Trying 'fdt@1' fdt subimage
     Description:  ECONET Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x818002fc
     Data Size:    7913 Bytes = 7.7 KiB
     Architecture: ARM
     Hash algo:    sha1
     Hash value:   73fbebcf3dfc0e0007752bdeff8c7c0f35611f24
   Booting using the fdt blob at 0x818002fc
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 9cdea000, end 9cdeeee8 ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.115 (compile@5c4df3427238) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Tue Sep 2 02:30:23 UTC 2025
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: econet,en7523
bootconsole [uart0] enabled
Memory policy: Data cache writealloc
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
[c05152b8]npu_pkt_buf_addr=9ddf1fc0:9ddf1fc0
npu_pkt_buffer memblock_alloc:9ddf1fc0,buf_size=1600000

PERCPU: Embedded 12 pages/cpu @dddd7000 s18048 r8192 d22912 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129728
Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=98:03:8E:33:C9:A8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 480188K/523008K available (4800K kernel code, 168K rwdata, 1552K rodata, 252K init, 638K bss, 42820K reserved, 0K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbec00000 - 0xbfe00000   (  18 MB)
      .text : 0xc0088000 - 0xc06bc510   (6354 kB)
      .init : 0xc06bd000 - 0xc06fc000   ( 252 kB)
      .data : 0xc06fc000 - 0xc07261c0   ( 169 kB)
       .bss : 0xc0729000 - 0xc07c8be4   ( 639 kB)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
NR_IRQS:64 nr_irqs:64 64
CPU0: found redistributor 0 region 0:0x09080000
Architected cp15 timer(s) running at 25.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 40ns
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [uart0] disabled
bootconsole [uart0] disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys debug
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80088280 - 0x800882d8
CPU1: found redistributor 1 region 0:0x090a0000
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (100.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.

l2c_sram_size:0x0
Initializing Ecnt Event Netlink Socket
Initializing Econet Event Netlink Socket nl_sk = dd577800
ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
sgmii probe init start
sgmii:int_name: sgmii_pcie0
sgmii:int_id: 0
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= e087c100
sgmii:sgmii->pcs2_base= e087ea00
sgmii:sgmii->an_base=   e0944000
sgmii:sgmii->ra_base=   e0946600
sgmii:sgmii->phya_base=   e0948c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=e087ea20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_pcie1
sgmii:int_id: 1
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= e094a100
sgmii:sgmii->pcs2_base= e094ca00
sgmii:sgmii->an_base=   e094e000
sgmii:sgmii->ra_base=   e0950600
sgmii:sgmii->phya_base=   e0952c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=e094ca20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_usb0
sgmii:int_id: 2
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= e0954100
sgmii:sgmii->pcs2_base= e0956a00
sgmii:sgmii->an_base=   e0958000
sgmii:sgmii->ra_base=   e095a600
sgmii:sgmii->phya_base=   e095cc00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=e0956a20, val=0
sgmii: sync_int exit
sgmii probe init exit
TC3162 hardware watchdog module loaded.
irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe
[crypto_k] res->name:/crypto_k@1fb70000
[crypto_k] res->start:0x1fb70000 ===
[crypto_k] res->end:0x1fb70803 ===
[crypto_k] ecnt_crypto_k->base:0xe09dc000
[trng] ecnt_trng_drv_probe
test_uc:e0826000 test_c:dd4c0000 cpu_top->base:e09e6800
[apb_timer] ecnt_timer_drv_probe
[timer] ecnt_timer->irq: 80
[timer] res->name:/apb_timer1@1fbf0100

i2c_slave init(ecnt_i2c_slave_drv_probe) done
[i2s] ecnt_i2s_drv_probe
7523 Thermal Sensor address probe done
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
io scheduler noop registered (default)
PCIe driver version: 7523.0.20210201
PCIe ref clk init.
===EN7523 PCIe init
mtk-pcie 1fa91000.pcie: pcie rc 0 linkup success
mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success

===============PCIe check===tmp_reg=========81014c3===========
mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
PCI: bus2: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit]
pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref]
pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit]
pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0:   bridge window [mem 0x20200000-0x203fffff]

 mt7512_pcie_fixup: 0x1438 = 20000015
 mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12
RC0 Link Traing Result: 10120008
===========RC0 set conf space INTx=============

 mt7512_pcie_fixup: 0x2438 = 20200015
 mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12
RC1 Link Traing Result: 10120008
===========RC1 set conf space INTx=============
ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162
ECNT ring buffer init success

``` EN7523DRAMC V0.6 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x17, OCDN:0x1b, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=512MB U-Boot 2014.04-rc1 (Sep 02 2025 - 02:26:44) DRAM: 496 MiB EN7529CT Now running in RAM - U-Boot at: 9edf7000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:9ee3dba0 Net: ecnt_eth Uip activated use flash mac: 98: 3:8E:33:C9:A8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 489: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: 98:03:8e:33:c9:a8 [ os_initCPEInfo ] 382: hw ver: XX530v v1.0 00000001 [ os_initCPEInfo ] 383: sw ver: 0.8.0 3.0.0 v6096 [ os_initCPEInfo ] 390: sn: 22530A6000984 [ os_initCPEInfo ] 393: pin: 13063269 [ os_initCPEInfo ] 400: endian: 0 [ os_initCPEInfo ] 403: acFlag: 0 [ os_getFullResetAndReconfigPermission ] 288: no vaild isp config, allow to fullreset of config [ CPEinit ] 513: CPE is idle Hit any key to stop autoboot: 0 Prepare to boot image0 bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'kernel@1' kernel subimage Description: ECONET Linux kernel Type: Kernel Image Compression: lzma compressed Data Start: 0x818022a4 Data Size: 2605567 Bytes = 2.5 MiB Architecture: ARM OS: Linux Load Address: 0x80088000 Entry Point: 0x80088000 Hash algo: sha1 Hash value: 38c0c7aaea6ae9e446728eb6d972007ca1a732d6 ## Loading fdt from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: ECONET Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x818002fc Data Size: 7913 Bytes = 7.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24 Booting using the fdt blob at 0x818002fc Uncompressing Kernel Image ... OK Loading Device Tree to 9cdea000, end 9cdeeee8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.115 (compile@5c4df3427238) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Tue Sep 2 02:30:23 UTC 2025 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: econet,en7523 bootconsole [uart0] enabled Memory policy: Data cache writealloc psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. [c05152b8]npu_pkt_buf_addr=9ddf1fc0:9ddf1fc0 npu_pkt_buffer memblock_alloc:9ddf1fc0,buf_size=1600000 PERCPU: Embedded 12 pages/cpu @dddd7000 s18048 r8192 d22912 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129728 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=98:03:8E:33:C9:A8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 480188K/523008K available (4800K kernel code, 168K rwdata, 1552K rodata, 252K init, 638K bss, 42820K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0088000 - 0xc06bc510 (6354 kB) .init : 0xc06bd000 - 0xc06fc000 ( 252 kB) .data : 0xc06fc000 - 0xc07261c0 ( 169 kB) .bss : 0xc0729000 - 0xc07c8be4 ( 639 kB) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:64 nr_irqs:64 64 CPU0: found redistributor 0 region 0:0x09080000 Architected cp15 timer(s) running at 25.00MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 40ns console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80088280 - 0x800882d8 CPU1: found redistributor 1 region 0:0x090a0000 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (100.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. l2c_sram_size:0x0 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = dd577800 ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available sgmii probe init start sgmii:int_name: sgmii_pcie0 sgmii:int_id: 0 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= e087c100 sgmii:sgmii->pcs2_base= e087ea00 sgmii:sgmii->an_base= e0944000 sgmii:sgmii->ra_base= e0946600 sgmii:sgmii->phya_base= e0948c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=e087ea20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_pcie1 sgmii:int_id: 1 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= e094a100 sgmii:sgmii->pcs2_base= e094ca00 sgmii:sgmii->an_base= e094e000 sgmii:sgmii->ra_base= e0950600 sgmii:sgmii->phya_base= e0952c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=e094ca20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_usb0 sgmii:int_id: 2 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= e0954100 sgmii:sgmii->pcs2_base= e0956a00 sgmii:sgmii->an_base= e0958000 sgmii:sgmii->ra_base= e095a600 sgmii:sgmii->phya_base= e095cc00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=e0956a20, val=0 sgmii: sync_int exit sgmii probe init exit TC3162 hardware watchdog module loaded. irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [crypto_k] res->name:/crypto_k@1fb70000 [crypto_k] res->start:0x1fb70000 === [crypto_k] res->end:0x1fb70803 === [crypto_k] ecnt_crypto_k->base:0xe09dc000 [trng] ecnt_trng_drv_probe test_uc:e0826000 test_c:dd4c0000 cpu_top->base:e09e6800 [apb_timer] ecnt_timer_drv_probe [timer] ecnt_timer->irq: 80 [timer] res->name:/apb_timer1@1fbf0100 i2c_slave init(ecnt_i2c_slave_drv_probe) done [i2s] ecnt_i2s_drv_probe 7523 Thermal Sensor address probe done squashfs: version 4.0 (2009/01/31) Phillip Lougher exFAT: Version 1.2.9 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) PCIe driver version: 7523.0.20210201 PCIe ref clk init. ===EN7523 PCIe init mtk-pcie 1fa91000.pcie: pcie rc 0 linkup success mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success ===============PCIe check===tmp_reg=========81014c3=========== mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers disabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit] pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit] pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 02] pci 0000:00:01.0: bridge window [mem 0x20200000-0x203fffff] mt7512_pcie_fixup: 0x1438 = 20000015 mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12 RC0 Link Traing Result: 10120008 ===========RC0 set conf space INTx============= mt7512_pcie_fixup: 0x2438 = 20200015 mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12 RC1 Link Traing Result: 10120008 ===========RC1 set conf space INTx============= ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162 ECNT ring buffer init success ```

Sirherobrine23 closed this issue 2026-02-11 02:12:32 +00:00

kvn193 referenced this issue 2026-02-14 22:19:01 +00:00

xx530v V1.8 Stock TPLINK bootlog #4

Sign in to join this conversation.

No Branch/Tag Specified

Branches Tags

No results found.

No results found.

Labels

No items

No labels

Milestone

No items

No Milestone

Assignees

Clear assignees

Sirherobrine23 (Matheus Sampaio Queiroga)

No Assignees

2 Participants

Notifications

Subscribe

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: Sirherobrine23/OffTopics#1