xx530v V1.8 Stock TPLINK bootlog #4
kvn193
commented ```
[29.270][cos] 121 - ERROR: CQC:tm_start:25, tm_end:29
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
[31.280][cos] 121 - ERROR: CQC:tm_start:25, tm_end:31
[31.280][cos] 137 - ERROR: CQC:FAILED!
[31.280][cos] 702 - ERROR: Expire time!
device eth0.1 left promiscuous mode
br_agc: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br_agc: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br_agc: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br_agc: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
[31.538][cmm] 591: num of CPU core = 2.
[31.539][cmm] 601: parent pid 850
[31.658][cmm] 608: start creating dropbear RSA key at CPU core 1.
[31.659][cmm] 618: child pre cpu mask 00000001
[31.659][cmm] 632: child post cpu mask 00000002
[31.660][cmm] 636: Try create dropbear RSA key loop=0 ...
Generating 2048 bit rsa key, this may take a while...
ip6tables: No chain/target/match by that name.
[31.965][cmm] 3192 - ERROR: Open TZ file error!
killall: dnsmasq: no process killed
[32.309][cmm] 158 - WARN: Empty DNSServer()
[32.461][cmm] 158 - WARN: Empty DNSServer()
[32.472][cmm] 158 - WARN: Empty DNSServer()
iptables: Bad rule (does a matching rule exist in that chain?).
ifconfig: SIOCSIFHWADDR: Cannot assign requested address
bridge name br0 has exist
bridge name br0 has exist
device br0 already exists; can't create bridge with the same name
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
done
[32.695][cmm] 203 - ERROR: ifName is eth0, vid is 5
[32.716][cmm] 203 - ERROR: ifName is eth0, vid is 4
vconfig: ioctl error for add: File exists
[32.728][cmm] 203 - ERROR: ifName is eth0, vid is 3
vconfig: ioctl error for add: File exists
[32.741][cmm] 203 - ERROR: ifName is eth0, vid is 2
vconfig: ioctl error for add: File exists
[32.753][cmm] 203 - ERROR: ifName is eth0, vid is 1
vconfig: ioctl error for add: File exists
[32.766][cmm] 203 - ERROR: ifName is eth0, vid is 0
sh: can't create /proc/tplink/eth_vlan: nonexistent directory
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
[32.919][cmm] 257 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName:
iptables: Bad rule (does a matching rule exist in that chain?).
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[32.947][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0!
Starting daemon...
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
br0: port 1(eth0.1) entered disabled state
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
br0: port 2(eth0.2) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
br0: port 3(eth0.3) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 is not a slave of br0
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 is not a slave of br0
device eth0.5 is not a slave of br0
device eth0.4 is not a slave of br0
sh: can't create /sys/devices/virtual/net/eth0.4/brport/multicast_router: nonexistent directory
[34.072][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public
[34.073][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next.
[34.073][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public
[34.073][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next.
[34.074][cmm] 2021 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
[36.456][cmm] 648: create dropbear RSA key success.
[36.457][cmm] 655: start creating dropbear DSS key at CPU core 1.
[36.457][cmm] 659: Try create dropbear DSS key loop=0 ...
Generating 1024 bit dss key, this may take a while...
[36.623][ntpc] 785 - ERROR: open DNS error
NTP server list:
[37.255][cmm] 671: create dropbear DSS key success.
[37.255][cmm] 680: parent pid 850
[37.255][cmm] 688: parent pre cpu mask 00000001
[37.256][cmm] 702: parent post cpu mask 00000003
WiFi@C12L1,get_dbg_setting_by_profile() 4428: debug level setting=INDEX0_debug_level not found!!
WiFi@C12L1,get_dbg_setting_by_profile() 4451: debug option setting=INDEX0_debug_option not found!!
pci 0000:00:00.0: enabling device (0140 -> 0142)
mt_pci_slave 0000:01:00.0: enabling device (0140 -> 0142)
!!HIF_RX_EVENT Only
pci 0000:00:01.0: enabling device (0140 -> 0142)
rtpci 0000:02:00.0: enabling device (0140 -> 0142)
npu_offload_mapping upcount=2
npu_offload_mapping PCIE_FUNCTION_MAX_NUM=10npu_offload_mapping chipid=790a
=========retvalue=790a14c3=========
=========chipid=790a=========
npu_offload_mapping EcntPciePortTypeMask=8
mt7916_init()-->
Use the default iPAiLNA bin image!
<--mt7916_init()
RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128!
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX1
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX2
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX3
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX4
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX5
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX6
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX7
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX8
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX9
WiFi@C12L2,match_index_by_chipname() 518: Not find slot id, back to old rule.
msta_ifname not found
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
whnat_module_init(): module init and register callback for whnat
create whnat_ctrl ok!!!
wed_slot_map_get(): assign slot_id:0 for entry: 0!
wed_slot_map_get(): assign slot_id:1 for entry: 1!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
msta_ifname not found
whnat_cap_support(): chip_id=7906 is in WHNAT support list
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1
wed_init(1): irq=91,base_addr=0xd577c000
wed_ring_init(): wed ring init result = 0
whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]
create wed ok!!!
wdma_init(): wdma(1) base addr=d577e400
wdma_init(): wdma(1) irq[0]=87
wdma_init(): wdma(1) irq[1]=88
wdma_init(): wdma(1) irq[2]=89
wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_probe(): probe fail since whnat is full!
whnat_dev0: probe of 1fa02000.wed2 failed with error -1
WiFi@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE
WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space
WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space
WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail!
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS0 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS1 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS2 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS3 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS4 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS5 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS6 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS7 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS8 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS9 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS10 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS11 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS12 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS13 PhyMode=177
WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=0, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=1, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=2, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=3, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=4, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=5, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=6, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=7, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=8, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=9, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=10, Desired MFPC=�
EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=256MB
U-Boot 2014.04-rc1 (Apr 26 2024 - 09:25:48)
DRAM: 240 MiB
EN7529CT
Now running in RAM - U-Boot at: 8edff000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In: serial
Out: serial
Err: serial
CPU0: found redistributor 0 region 0:8ee3d920
Net: ecnt_eth
Uip activated
use flash mac: EC:75: C:3B: 0:68
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 465: CPE init
[ cp_initCommProto ] 277: g_commProtoConfig.myMac: ec:75:0c:3b:00:68
Boot flag csum incorrect, return image0
[ os_initCPEInfo ] 279: hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 280: sw ver: 0.4.0 3.0.0 v6096
[ os_initCPEInfo ] 287: sn: 224C077005350
[ os_initCPEInfo ] 290: pin: 11172246
[ os_initCPEInfo ] 297: endian: 0
[ os_initCPEInfo ] 300: acFlag: 0
[ CPEinit ] 489: CPE is idle
Hit any key to stop autoboot: 0
Boot flag csum incorrect, return image0
Prepare to boot image0
Boot flag csum incorrect, return image0
bootm flag=0, states=70f
## Loading kernel from FIT Image at 81800200 ...
Using 'conf@1' configuration
Trying 'kernel@1' kernel subimage
Description: ECONET Linux kernel
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x818022a4
Data Size: 2603360 Bytes = 2.5 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80088000
Entry Point: 0x80088000
Hash algo: sha1
Hash value: d1c1d958affba6a8a1e6a706ea2b292daf5414b6
## Loading fdt from FIT Image at 81800200 ...
Using 'conf@1' configuration
Trying 'fdt@1' fdt subimage
Description: ECONET Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x818002fc
Data Size: 7913 Bytes = 7.7 KiB
Architecture: ARM
Hash algo: sha1
Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24
Booting using the fdt blob at 0x818002fc
Uncompressing Kernel Image ... OK
Loading Device Tree to 8cdf2000, end 8cdf6ee8 ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.115 (compile@735b0b8fe659) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Fri Apr 26 09:33:09 UTC 2024
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: econet,en7523
bootconsole [uart0] enabled
Memory policy: Data cache writealloc
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
[c05142b8]npu_pkt_buf_addr=8dff37c0:8dff37c0
npu_pkt_buffer memblock_alloc:8dff37c0,buf_size=1600000
PERCPU: Embedded 12 pages/cpu @cdfd9000 s18048 r8192 d22912 u49152
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704
Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=EC:75:0C:3B:00:68 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220308K/260864K available (4796K kernel code, 168K rwdata, 1548K rodata, 244K init, 638K bss, 40556K reserved, 0K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbec00000 - 0xbfe00000 ( 18 MB)
.text : 0xc0088000 - 0xc06ba468 (6346 kB)
.init : 0xc06bb000 - 0xc06f8000 ( 244 kB)
.data : 0xc06f8000 - 0xc0722140 ( 169 kB)
.bss : 0xc0725000 - 0xc07c4be0 ( 639 kB)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:64 nr_irqs:64 64
CPU0: found redistributor 0 region 0:0x09080000
Architected cp15 timer(s) running at 25.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 40ns
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [uart0] disabled
bootconsole [uart0] disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys debug
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80088280 - 0x800882d8
CPU1: found redistributor 1 region 0:0x090a0000
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (100.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
l2c_sram_size:0x0
Initializing Ecnt Event Netlink Socket
Initializing Econet Event Netlink Socket nl_sk = cd577800
ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
sgmii probe init start
sgmii:int_name: sgmii_pcie0
sgmii:int_id: 0
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= d087c100
sgmii:sgmii->pcs2_base= d087ea00
sgmii:sgmii->an_base= d0944000
sgmii:sgmii->ra_base= d0946600
sgmii:sgmii->phya_base= d0948c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=d087ea20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_pcie1
sgmii:int_id: 1
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= d094a100
sgmii:sgmii->pcs2_base= d094ca00
sgmii:sgmii->an_base= d094e000
sgmii:sgmii->ra_base= d0950600
sgmii:sgmii->phya_base= d0952c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=d094ca20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_usb0
sgmii:int_id: 2
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= d0954100
sgmii:sgmii->pcs2_base= d0956a00
sgmii:sgmii->an_base= d0958000
sgmii:sgmii->ra_base= d095a600
sgmii:sgmii->phya_base= d095cc00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=d0956a20, val=0
sgmii: sync_int exit
sgmii probe init exit
TC3162 hardware watchdog module loaded.
irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe
[crypto_k] res->name:/crypto_k@1fb70000
[crypto_k] res->start:0x1fb70000 ===
[crypto_k] res->end:0x1fb70803 ===
[crypto_k] ecnt_crypto_k->base:0xd09dc000
[trng] ecnt_trng_drv_probe
test_uc:d0826000 test_c:cd4c0000 cpu_top->base:d09e6800
[apb_timer] ecnt_timer_drv_probe
[timer] ecnt_timer->irq: 80
[timer] res->name:/apb_timer1@1fbf0100
i2c_slave init(ecnt_i2c_slave_drv_probe) done
[i2s] ecnt_i2s_drv_probe
7523 Thermal Sensor address probe done
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
io scheduler noop registered (default)
PCIe driver version: 7523.0.20210201
PCIe ref clk init.
===EN7523 PCIe init
mtk-pcie 1fa91000.pcie: pcie rc 0 linkup success
mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success
===============PCIe check===tmp_reg=========81014c3===========
mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
PCI: bus2: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit]
pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref]
pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit]
pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [mem 0x20200000-0x203fffff]
mt7512_pcie_fixup: 0x1438 = 20000015
mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12
RC0 Link Traing Result: 10120008
===========RC0 set conf space INTx=============
mt7512_pcie_fixup: 0x2438 = 20200015
mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12
RC1 Link Traing Result: 10120008
===========RC1 set conf space INTx=============
ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162
ECNT ring buffer init success
brd: module loaded
SPI Flash Init Start
Found no SPI flash device
IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6)
Set SPI Clock to 50 Mhz
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
spi nand flash
tc3162: flash device 0x02000000 at 0x00000000
EN7512 mtd init: spi nand probe enter
[spi_nand_setup] : Enter
nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01
nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand_scan_ident ok
[spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11
bmt pool size: 81
BMT & BBT Init Success
Creating 11 MTD partitions on "EN7512-SPI_NAND":
0x000000000000-0x000004a00000 : "whole"
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x0000000a0000 : "romfile"
0x0000000a0000-0x0000002a0000 : "misc"
0x0000002a0000-0x000000aa0000 : "kernel"
0x000000aa0000-0x000002500000 : "rootfs"
0x0000002a0000-0x000002500000 : "firmware"
0x000002500000-0x000002d00000 : "kernel_slave"
0x000002d00000-0x000004760000 : "rootfs_slave"
0x000002500000-0x000004760000 : "firmware_slave"
0x0000049e0000-0x000004a00000 : "reserve"
rootfs
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
USB driver version: 7523.3.20210202
port 0 u2_slew_rate_cal_7523
FM_OUT value = 105(0x00000069)
SR calibration value = 5
port 1 u2_slew_rate_cal_7523
FM_OUT value = 106(0x0000006A)
SR calibration value = 5
xhci-hcd 1fab0000.xhci: xHCI Host Controller
xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1
xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci-hcd 1fab0000.xhci: xHCI Host Controller
xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver cypress_m8
usbserial: USB Serial support registered for DeLorme Earthmate USB
usbserial: USB Serial support registered for HID->COM RS232 Adapter
usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3442 buckets, 13768 max)
ludewei add module
gre: GRE over IPv4 demultiplexor driver
IPv4 over IPsec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Ebtables v2.0 registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
Registering SWP/SWPB emulation handler
tc3162ser_startup
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Freeing unused kernel memory: 244K
busybox init and set aff
starting pid 439, tty '': '/etc/init.d/rcS'
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directory
usbcore: registered new interface driver usb-storage
insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory
tp_board: loading out-of-tree module taints kernel.
Register flash device: flash0
rcS (439): drop_caches: 3
start XPON related APP
/tmp/cfg_load is not exist,left time 30
svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so
svchost_parse_print_conf: Entry = svc_cfg_main
svchost_parse_print_conf: Param = 111
random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
shm_pool_init: base[20000000] size[00200000]]
shm_pool_init: Init Done!
random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
svc_cfg_start: ........
Load cfg from file [/var/romfile.cfg] .....
tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
gic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use backup romfile to check!
Couldn't open mtd:reservearea!
mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288
Unlocking reservearea ...
Could not open mtd device: reservearea
[BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea
tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
gic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use default romfile to check!
mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432
Unlocking reservearea ...
Could not open mtd device: reservearea
[DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea
tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
agic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use usrfs romfile to check!
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
/tmp/cfg_load is not exist,left time 29
ctromfile.cfg
<<call handle_proline_paras>>
mtd[readflash]:device=[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
handle_proline_paras 1564 SSID:ChinaNet-AP.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ha[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ndle_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
roline[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
_paras [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
1564 W[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
PAPSK:[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
1234567[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
8.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
handlrandom: ubusd: uninitialized urandom read (4 bytes read, 54 bits of entropy available)
e_prolin[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
e_pa[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ras 1[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
564 Srandom: ubusd: uninitialized urandom read (4 bytes read, 58 bits of entropy available)
SID:ChinaNet-AP.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
handle_proline_paras 1564 WPAPSK:12345678.
handrandom: ubusd: uninitialized urandom read (4 bytes read, 60 bits of entropy available)
le_proline_paras 1564 SSID:ChinaNet-AP.
handle_proline_paras 1564 WPAPSK:12345678.
handle_proline_paras 1564 SSID:ChinaNet-AP.
handle_proline_paras 1564 WPAPSK:12345678.
handle_proline_paras 1564 web_passwd:1234.
handle_proline_paras 1564 SerialNumber:FHTT12345678.
parse proline para Password fail.
parse proline para Password fail.
handle_proline_paras 1564 Mode:GPON.
root.mesh.apclibh.entry.1:BhProfileSsid not found.
root.mesh.apclibh.entry.1:BhProfileWpaPsk not found.
root.mesh.apclibh.entry.2:BhProfileSsid not found.
root.mesh.apclibh.entry.2:BhProfileWpaPsk not found.
handle_proline_paras 1564 (null):1.
cfg_save_object: open file [/tmp/var/romfile.cfg] fail
----> Load config file fail.
svc_cfg_start: ........ ok [20001030]!
svchost_get_event_val: get param fail [0]
start omci
svchost_prandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available)
arse_print_confrandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available)
: Path = /lib/libother_svc.so
svchost_parse_print_conf: Entry = svc_other_main
svchost_parse_print_conf: Param = 111
svchost_parse_print_conf: Path = /lib/libpon_svc.so
svchost_parse_print_conf: Entry = svc_pon_main
svchost_parse_print_conf: Param = 111
svchost_parse_print_conf: Path = /lib/libcentral_ctrl_svc.so
svchost_parse_print_conf: Entry = svc_central_ctrl_main
svchosrandom: ubusd: uninitialized urandom read (4 bytes read, 80 bits of entropy available)
t_parse_print_conf: Param = 111
module_sel: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
ecnt_register_cpu_interrupts
random: ubusd: uninitialized urandom read (4 bytes read, 82 bits of entropy available)
svc_centrl_ctrl_init: ...... reg event ok
PID=5dev mount is start!
4config
7 0
event receive pthrearandom: ubusd: uninitialized urandom read (4 bytes read, 82 bits of entropy available)
d_create nlksock_create:nlksock create err:Protocol not supported!
OK, keep going......
svchost_get_event_val: get pactive_notify_handler: nlksock_create fail
aram fail [0]
open /proc/tc3162/reset_button faile.
open /proc/tc3162/button_type faile.
open /proc/tc3162/led_switch_button faile.
svc_other_init: ...... reg event ok
svchost_get_event_val: get param fail [0]
mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory
svc_pon_int: ...... reg event ok
svc_pon_int: ...... reg method ok
cfg svc loaTC3162 LED Manager 0.1 init
tcledctrl version: tcledctrl V1.1.0.0 (Apr 26 2024-09:40:40).
d done, 0 ms
[svc_cfg_lled path:/userfs/7529_62led.conf
oad_special_info][581]SET [omci_lib_set_max_ports_list] Result=0
svchost_get_event_val: get param fail [0]
Couldn't open mtd:reservearea!
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152
Unlocking reserveareatccicmd V1.1.0.0 (Apr 26 2024-09:40:46)
ERROR!Create /etc/fwTCver.conf fail!
...
Could not open mtd device: reservearea
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][661]SET [oam_lib_set_hardware_version] Result=0
mtd[readfla
SIFMaster 0.1 init
===== Interface 0 is ON =====
Register sifm cmd
sh]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Crandom: nonblocking pool is initialized
an't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open(gdump_mode_sel): GDUMP sel has switch to 3
ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215
/etc/deviceParaStatic.conf
[svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:3
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:7
ifc_set_action: cpu:1, nbq:8
TP_User Ecnt ponTime:OMCI Startup
macType = 0
flashQdmaInit = 0x33
netif_napi_add() called with weight 256 on device lan_int2_if
ether.c:v1.00-NAPI 29.Mar.2015
eth0: FE MAC Ethernet address: EC:75:0C:3B:00:68
Use Internal switch ,type 10
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9
GE Rext AnaCal Done! (6)(0x26)
GE Rext AnaCal Done! (6)(0x26)
GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b)
GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (1)(0x1)
GE Tx offset AnaCal Done! (5)(0x24)
Unlocking config ...
Could not open mtd GE Tx offset AnaCal Done! (5)(0x24)
device: config
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx amp AnaCal Done! (3) (0x23)
GE Tx amp AnaCal Done! (3) (0x23)
GE Tx amp AnaCal Done! (9) (0x29)
GE Tx amp AnaCal Done! (13) (0x2d)
[tcPhyInit] in [tcPhyInit] out , r31 = (9, 0x0)
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9
GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (1)(0x20)
GE Tx offset AnaCal Done! (5)(0x24)
GE Tx offset AnaCal Done! (2)(0x21)
GE Tx offset AnaCal Done! (2)(0x21)
GE Tx amp AnaCal Done! (10) (0x2a)
GE Tx amp AnaCal Done! (6) (0x26)
GE Tx amp AnaCal Done! (16) (0x30)
GE Tx amp AnaCal Done! (14) (0x2e)
[tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0)
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9
GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx amp AnaCal Done! (8) (0x28)
GE Tx amp AnaCal Done! (13) (0x2d)
GE Tx amp AnaCal Done! (9) (0x29)
GE Tx amp AnaCal Done! (16) (0x30)
[tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0)
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9
GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx amp AnaCal Done! (10) (0x2a)
GE Tx amp AnaCal Done! (4) (0x24)
GE Tx amp AnaCal Done! (4) (0x24)
GE Tx amp AnaCal Done! (10) (0x2a)
[tcPhyInit] in mount: can'
not found str : MAP, erase and mount again
t dev_mount is ok
find /dev/mtdblock in /etc/fstab
[tcPhyInit] out , r31 = (12, 0x0)
eth0: starting interface.
netif_start_queue
macType = 0
flashQdmaInit = 0x33
fe resource init start
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
Ralink HW NAT Module Enabled
you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512
HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384
IP check use Black List
EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw
[c0514268]isForceToCpu=0:0
copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xd0f00000
copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xd0b80000
[C0]core freq at 333000000 Hz
[C0]timer_init: Timer clk is running at 125 Mhz
[C0]wcid_counter_init:0
[C0]wcid_counter_init:1
[C0][NPU] ba_node_init...
[C0]baNode_array_init
[C0]counter_init:2
[C0][NPU] queue_mutex_init...
[C0]qdma_init
[C1]core1_main
[C2]timer_isr Store Value 1e903000, val[C2]core2_main
[C3]core3_main
[C3]do npu_enq_deq_init
[c0514244]npu_pkt_buf_addr=8dff37c0
npu_wifi_offload_get_pkt_buf_addr=8dff37c0
[c0514244]npu_pkt_buf_addr=8dff37c0
[C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=8dff37c0, 8dff37c0
npu_wifi_offload_get_force_to_cpu_flag=0
isForceToCpu=0
[C0](core0_main) just return, because QDMA driver for ARM is not ready
mt_whnat: Unknown symbol glb_var_wed_ring (err 0)
mt_whnat: Unknown symbol hc_get_chip_ops (err 0)
mt_whnat: Unknown symbol mt_wlan_hook_unregister (err 0)
mt_whnat: Unknown symbol glb_var_wdma_ring (err 0)
mt_whnat: Unknown symbol mt_wlan_hook_register (err 0)
mt_whnat: Unknown symbol hc_get_hif_ctrl (err 0)
mt_whnat: Unknown symbol glb_var_whnat_fbuf (err 0)
mt_whnat: Unknown symbol wlan_operate_get_frag_thld (err 0)
mt_whnat: Unknown symbol hc_get_chip_tx_token_nums (err 0)
mt_whnat: Unknown symbol hc_get_chip_sw_tx_token_nums (err 0)
insmod: can't insert '/lib/modules/mt_whnat.ko': unknown symbol in module, or unknown parameter
tso_lan: tso_v2.c [201]: dscpDmaAddr =8acd0000
tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0
tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0
tso_proc_init.
val_string:add v4 - 445 - -
dport:0, sport:445, daddr:0, saddr:0
---- 7570_bob.conf ----
---- cp -f /etc/7570_bob.conf /tmp/ ----
do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=aa data[1]=06 data[2]=cd data[3]=05
do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success!
---- flashtool readflashtobob ----
______ XPON_PHY init ______
little endian
NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0
xPON PHY initialization done
E3 patched
EN7571 found!
FLASH matrix got
PWRADC offset = 0x3093
PWRADC ready
BG 1.76V = 0x28c
BG 0.875V = 0x148
RSSI_Vref = 0x21c
RSSI_V = 0x29b
eFuse value = 0xe
eFuse offset = 4.2'C
Start GPON Tx Calibration
CDR disabled
RGS_T0C = 0x52
RGS_T1C = 0x54
CDR enabled
APD initialization done
en7571_reg_init
Initial current loaded
PWR/ER loaded
TIASD = 0x1d
Rx LOS is set
Internal DDMI Enabled
KT Enabled
EN7571 Initialization Done!
PON PHY driver version is 2100825.116.11
xPON driver initialization
Alloc data struct memory successful, 36508
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
VoIPBasic_Commo
[1970-1-1 Thu 00:00:12.942661]omci start!
n S
[1970-1-1 Thu 00:00:12.946983]main gponOmciCmsgsrvInit
IPProto
[1970-1-1 Thu 00:00:12.952781]OMCI wait for DM init...
col is SIP
prevSipStatus: 0, curSipStatus: 0
voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0
XPON Mapping Module init OK!
vtag_drv_init
tc_multiwan version: tcsmux V1.1.0.0 (Apr 26 2024-09:40:51).
pon_vlan_init
Multi Lan port
initilize xpon igmp module....done!
pon_mac_filter_init
Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon_multicast.ko': No such file or directory
device eth0 entered promiscuous mode
device eth0.1 is not a slave of br0
device eth0.2 is not a slave of br0
device eth0.3 is not a slave of br0
device eth0.4 is not a slave of br0
device eth0 is already a member of a bridge; can't enslave it to bridge br0.
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
device eth0.1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
device eth0.2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
device eth0.3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready
device eth0.4 entered promiscuous mode
ifconfig: ioctl 0x8913 failed: No such device
interface eth0.5 does not exist!
insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory
insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory
insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory
insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory
ifconfig: SIOCSIFMTU: Invalid argument
ifconfig: SIOCSIFMTU: Nvlan tag restore switch : enable
o such device
insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory
start ponmgr_cfg
MTK DSP support
rcS (439): drop_caches: 3
rcS.sdk init done!
creat_domain_proc ok
tp_domain init ok
device recognition register success
status:
DSPCore[Ver:TVB1.0.23.800-1]
[1] PCM V2.4 (Jun 29 2021 03:11:21)
bind irq-113 to CPU1
PCM_INT=28
pcm[Ver:TVB1.0.23.800-1]
lec[Ver:TVB1.0.23.800-1]
SYS_HCLK=250
Major Num:233, device: spi
spi[Ver:TVB1.0.23.800-1]
[14.598][cos] 415 - ERROR: before cpu mask 00000003
[14.598][cos] 430 - ERROR: after cpu mask 00000001
========fxs3 init start========
========fxs3 init complete========
.
init mod-slic3
slic3[Ver:TVB1.0.23.800-1]
mode=
ISI
init mod-ksocket
ksocket[Ver:TVB1.0.23.800-1]
ortp[Ver:TVB1.0.23.800-1]
monitor value xxxxxxx
init mod-acodec
acodec[Ver:TVB1.0.23.800-1]
ponTime:ONU Ready
init mod-foip3
foip3[Ver:TVB1.0.23.800-1]
Interface name length cannot exceed 15 characters.
Interface name length cannot exceed 15 characters.
Silabs SLIC type selected by SW makefile compile option
[4294938870][slic][INFO][gpio_clocksrc_init:L2399]ISI
[4294938871][spi][INFO][SPI_Reset:L473]
SPI_Reset 2
[15.816][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
slic deviceVerify ProSLIC_Version 9.1.0
Silabs SLIC Reset
REG_0 = 0xaa ,device[0], Part_num 0x5, Revision 0x2
device[0]:deviceVerify Success!
SPI Reset times:1
pcm1 ch num:1 pcm2 ch num:0
fxs[Ver:TVB1.0.23.800-1]
[fxs_init_action](1344)noinit=0
pcm1 ch num:1 pcm2 ch num:0
Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1)
deviceInit on DeviceId = 0
ProSLIC_createControlInterface = 0
ProSLIC_createDevice = 0
get_start_chanid=0
ProSLIC_createChannel = 0
ProSLIC_SWInitChan = 0
device [0] chanPvt[0].chanType 1
device [0] chanPvt[0].chipType 6
Si3218x_Init_with_Options(640) size = 1 init_opt = 0
SiVoice: Channel 0: Type = PROSLIC Rev = 2
ProSLIC:loading patch: 06302015
.
Si3218x: Channel 0 : VBAT Up = 59.559 v
ProSLIC:Starting LB Cal on channel 0
.init mod-vdsp for 1 channels 2 sessions
vdsp[Ver:TVB1.0.23.800-1]
===============================
|| MTK DSP init successfully ||
===============================
pid 2's current affinity mask: 3
pid 882's current affinity mask: 1
IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
___ COUNTRY SETTING ___
ring_idx : 0
imp_idx : 0
ProSLIC:PCMStart
slic_set_gainLv - fffffffa / 0
pid 882's new affinity mask: 2
fxsSetLine[0]state 0x9 State UNKNOWN !
pid 2's current affinity mask: 3
pid 2's current affinity mask: 3
pid 2's current affinity mask: 3
pid 1090Dump SLIC[0] register:
=================================
00 01 02 03 04 05 06 07 08 09
=================================
00: aa 00 00 1f 00 40 00 a2 e5 ff
10: 25 13 00 00 00 20 00 00 00 00
20: 00 00 00 02 00 00 00 00 00 00
30: 11 00 00 10 00 00 00 02 00 40
40: 1f 00 7d 00 00 59 04 10 66 00
50: 00 00 00 00 00 00 00 00 ff' 00
60: 00 00 e4 00 00 00 00 00 f0 00
70: 00 00 00 00 00 00 02 00 00 00
80: 3f 01 b7 03 af 05 0e 0f ed 10
90:s 40 07 9f 06 c1 11 24 05 80 05
100: 00 01 00 00 00 00 00 00 00 00
110: 00 00 47 01 ba 00 02 ff 38 00
120: 87 05 87 05 00 20 03 00
=================================
current afwrite address(47) value : 0x8
finity mask: 1
pid 1090's new affinity mask: 2
rcS (439): drop_caches: 3
rcS init done!
Please press Enter to activate this console. TC3162 hardware watchdog initialized
cpu 1
cpu 0
sleep 90s!
[20.161][cmm] 2412 - ERROR: software version is not match, in config, version = 0
[20.182][cmm] 5116 - ERROR: Base config length is too long
[20.182][cmm] 2489 - ERROR: Read ISP config from flash failed. ret = 1
[20.184][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/default_config.xml!, about to open file /etc/default_config.xml
[20.309][cmm] 582 - ERROR: Meet unrecognized object node "X_TP_SysMode", skip the node
[20.309][cmm] 582 - ERROR: Meet unrecognized object node "X_TP_IPTV", skip the node
[20.337][cmm] 582 - ERROR: Meet unrecognized object node "QoS", skip the node
[20.339][cmm] 587 - ERROR: Meet unrecognized parameter node "ToTagMatching", skip the node
[20.352][cmm] 587 - ERROR: Meet unrecognized parameter node "IsDefaultAgent", skip the node
[20.352][cmm] 587 - ERROR: Meet unrecognized parameter node "EncodeType", skip the node
[20.355][cmm] 587 - ERROR: Meet unrecognized parameter node "EncodeType", skip the node
xpon_phy NOT start yet!! [pon_phy_set_api_dispatch:1404] gpPhyPriv->is_phy_start = 0
Disable GPON ONU
[20.357][cmm] 587 - ERROR: Meet unrecognized parameter node "EncodeType", skip the node
[20.362][cmm] 587 - ERROR: Meet unrecognized parameter node "WanNumberOfEntries", skip the node
[20.362][cmm] 587 - ERROR: Meet unrecognized parameter node "NumberOfDetectionThread", skip the node
[20.374][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002
[20.378][cos] 642 - ERROR: Disable gpon driver before true SN set
[20.391][cos] 246 - ERROR: COS wait for OMCI init...
[1970-1-1 Thu 00:00:21.40115]DM init use 8 seconds!
[1970-1-1 Thu 00:00:21.45466][main][1116]:Enter OMCI State Machine, OMCI_STATE_START!
[1970-1-1 Thu 00:00:21.134924][omciAddVendorMeToStdMeTable][1115] before DM operation ,totalSize(2)
[ omciAddVen
[1970-1-1 Thu 00:00:21.185162][omciAddVendorMeToStdMeTable][1166] toalTblSize(2) a/b (0)
dorMeToStdM
[1970-1-1 Thu 00:00:21.194203] initFilterMeInfo toalTblSize = 3
eTable ] 113
[1970-1-1 Thu 00:00:21.201131][main][1134]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE!
2: 1#1
[
[1970-1-1 Thu 00:00:21.212139][omciInitCapability][539] omciInitCapability In
omciAdd
[1970-1-1 Thu 00:00:21.219938]pPortList(48,248,47,47,47,47,32)
Vend
[1970-1-1 Thu 00:00:21.226280]pPort(48)
orMeT
[1970-1-1 Thu 00:00:21.230456]pPort(248)
oStdM
[1970-1-1 Thu 00:00:21.234791]pPort(47)
eT
[1970-1-1 Thu 00:00:21.238840]pPort(47)
able
[1970-1-1 Thu 00:00:21.242967]pPort(47)
] 1
[1970-1-1 Thu 00:00:21.247197]pPort(47)
136
[1970-1-1 Thu 00:00:21.251251]pPort(32)
: 2#1,1
[1970-1-1 Thu 00:00:21.255779][omciInitCapability][635] getNext Dev2 currGponAuthObj SN(),SNtype(1)
[ omc
[1970-1-1 Thu 00:00:21.265451][omciInitCapability][666] omciSaveOnuCapSn_to_lib error
iAddVen
[1970-1-1 Thu 00:00:21.273988][omciInitCapability][682] currOmciCapObj.vendorId IS (TPLG)
dorMeTo
[1970-1-1 Thu 00:00:21.282703]read_flash:read In - 8 bytes in 77463552
StdMeTable
[1970-1-1 Thu 00:00:21.290321]read_flash:read In - 8 bytes in 77463552
] 1132: 1#2
[ omciAddVendorMeToStdMeTable ] 1136: 2#2,1
omciSaveAuth_to_lib_data(352): gponSn should be even
[1970-1-1 Thu 00:00:21.314052]read_flash:read In - 512 bytes in 2752512
[1970-1-1 Thu 00:00:21.321320]read_flash:read In - 512 bytes in 38797312
svchost_get_event_val: get param fail [0]
[1970-1-1 Thu 00:00:21.340352]do not config omci intance by file info
ctromfile.cfg
[1970-1-1 Thu 00:00:21.368606][main][1144]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT!
set olt type: 0
sh: /bin/mv: not found
ponTime:Connection Start
working_mode: 1
[42949394350ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0
[42949394360ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1
[42949394370ms][phy_init.c:1946] PON PHY scu_reset_init mode=1
Couldn't open image file: /tmp/tc_st[42949394380ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1
ore_romfile.conf!
[1970-1-1 Thu 00:00:21.437773][main][1172]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN!
Unlocking reservearea ...
Could not open mtd device: reservearea
Couldn't open image file: /tmp/tc_store_romfile.conf!
[22.420][cos] 252 - ERROR: OMCI init use 2 seconds!
===========>manufacture:0, ISPflag:0
ioctl: No such device
ifconfig: SIOCSIFHWADDR: No such device
IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br0: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
device eth0.1 entered promiscuous mode
br_agc: port 1(eth0.1) entered forwarding state
br_agc: port 1(eth0.1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br_agc: link becomes ready
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
ifconfig: ioctl 0x8913 failed: No such device
sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory
interface eth0.5 does not exist!
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
sendto: No such file or directory
line(593) Msg.type(2014) pid(852) errno(2) ret(-1)
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
[25.240][cos] 121 - ERROR: CQC:tm_start:25, tm_end:25
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
[27.250][cos] 121 - ERROR: CQC:tm_start:25, tm_end:27
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
[29.260][cos] 121 - ERROR: CQC:tm_start:25, tm_end:29
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
[31.270][cos] 121 - ERROR: CQC:tm_start:25, tm_end:31
[31.270][cos] 137 - ERROR: CQC:FAILED!
[31.270][cos] 702 - ERROR: Expire time!
device eth0.1 left promiscuous mode
br_agc: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br_agc: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br_agc: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br_agc: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
[31.559][cmm] 591: num of CPU core = 2.
[31.559][cmm] 601: parent pid 852
[31.662][cmm] 608: start creating dropbear RSA key at CPU core 1.
[31.663][cmm] 618: child pre cpu mask 00000001
[31.663][cmm] 632: child post cpu mask 00000002
[31.663][cmm] 636: Try create dropbear RSA key loop=0 ...
Generating 2048 bit rsa key, this may take a while...
ip6tables: No chain/target/match by that name.
[32.003][cmm] 3192 - ERROR: Open TZ file error!
killall: dnsmasq: no process killed
[32.374][cmm] 158 - WARN: Empty DNSServer()
[32.528][cmm] 158 - WARN: Empty DNSServer()
[32.540][cmm] 158 - WARN: Empty DNSServer()
iptables: Bad rule (does a matching rule exist in that chain?).
ifconfig: SIOCSIFHWADDR: Cannot assign requested address
bridge name br0 has exist
bridge name br0 has exist
device br0 already exists; can't create bridge with the same name
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
done
[32.764][cmm] 203 - ERROR: ifName is eth0, vid is 5
[32.784][cmm] 203 - ERROR: ifName is eth0, vid is 4
vconfig: ioctl error for add: File exists
[32.797][cmm] 203 - ERROR: ifName is eth0, vid is 3
vconfig: ioctl error for add: File exists
[32.809][cmm] 203 - ERROR: ifName is eth0, vid is 2
vconfig: ioctl error for add: File exists
[32.822][cmm] 203 - ERROR: ifName is eth0, vid is 1
vconfig: ioctl error for add: File exists
[32.835][cmm] 203 - ERROR: ifName is eth0, vid is 0
sh: can't create /proc/tplink/eth_vlan: nonexistent directory
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[32.984][cmm] 257 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName:
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[33.007][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0!
iptables: Bad rule (does a matching rule exist in that chain?).
Starting daemon...
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
br0: port 1(eth0.1) entered disabled state
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
br0: port 2(eth0.2) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
br0: port 3(eth0.3) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 is not a slave of br0
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 is not a slave of br0
device eth0.5 is not a slave of br0
device eth0.4 is not a slave of br0
sh: can't create /sys/devices/virtual/net/eth0.4/brport/multicast_router: nonexistent directory
[34.133][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public
[34.133][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next.
[34.133][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public
[34.133][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next.
[34.134][cmm] 2021 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
[36.682][ntpc] 785 - ERROR: open DNS error
NTP server list:
WiFi@C12L1,get_dbg_setting_by_profile() 4428: debug level setting=INDEX0_debug_level not found!!
WiFi@C12L1,get_dbg_setting_by_profile() 4451: debug option setting=INDEX0_debug_option not found!!
pci 0000:00:00.0: enabling device (0140 -> 0142)
mt_pci_slave 0000:01:00.0: enabling device (0140 -> 0142)
!!HIF_RX_EVENT Only
pci 0000:00:01.0: enabling device (0140 -> 0142)
rtpci 0000:02:00.0: enabling device (0140 -> 0142)
npu_offload_mapping upcount=2
npu_offload_mapping PCIE_FUNCTION_MAX_NUM=10npu_offload_mapping chipid=790a
=========retvalue=790a14c3=========
=========chipid=790a=========
npu_offload_mapping EcntPciePortTypeMask=8
mt7916_init()-->
Use the default iPAiLNA bin image!
<--mt7916_init()
RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128!
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX1
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX2
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX3
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX4
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX5
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX6
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX7
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX8
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX9
WiFi@C12L2,match_index_by_chipname() 518: Not find slot id, back to old rule.
msta_ifname not found
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
whnat_module_init(): module init and register callback for whnat
create whnat_ctrl ok!!!
wed_slot_map_get(): assign slot_id:0 for entry: 0!
wed_slot_map_get(): assign slot_id:1 for entry: 1!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
msta_ifname not found
whnat_cap_support(): chip_id=7906 is in WHNAT support list
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1
wed_init(1): irq=91,base_addr=0xd56fe000
wed_ring_init(): wed ring init result = 0
whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]
create wed ok!!!
wdma_init(): wdma(1) base addr=d5864400
wdma_init(): wdma(1) irq[0]=87
wdma_init(): wdma(1) irq[1]=88
wdma_init(): wdma(1) irq[2]=89
wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_probe(): probe fail since whnat is full!
whnat_dev0: probe of 1fa02000.wed2 failed with error -1
WiFi@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE
WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space
WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space
WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail!
EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=256MB
U-Boot 2014.04-rc1 (Apr 26 2024 - 09:25:48)
DRAM: 240 MiB
EN7529CT
Now running in RAM - U-Boot at: 8edff000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In: serial
Out: serial
Err: serial
CPU0: found redistributor 0 region 0:8ee3d920
Net: ecnt_eth
Uip activated
use flash mac: EC:75: C:3B: 0:68
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 465: CPE init
[ cp_initCommProto ] 277: g_commProtoConfig.myMac: ec:75:0c:3b:00:68
Boot flag csum incorrect, return image0
[ os_initCPEInfo ] 279: hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 280: sw ver: 0.4.0 3.0.0 v6096
[ os_initCPEInfo ] 287: sn: 224C077005350
[ os_initCPEInfo ] 290: pin: 11172246
[ os_initCPEInfo ] 297: endian: 0
[ os_initCPEInfo ] 300: acFlag: 0
[ CPEinit ] 489: CPE is idle
Hit any key to stop autoboot: 0
ECNT>
EN7523DRAMC V0.6
dram_type = 5, speed = 1866
Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6
DDR1866 PLL setting init
[Dramc] PCDDR3 AC Timing update
Fire MRW command...
ModeReg.2, value.0x20 done
Fire MRW command...
ModeReg.3, value.0x0 done
Fire MRW command...
ModeReg.1, value.0x6 done
Fire MRW command...
ModeReg.0, value.0x1114 done
Fire MRW command...
ModeReg.1, value.0x86 done
Fire MRW command...
ModeReg.1, value.0x6 done
Calculate size.
DRAM size=256MB
U-Boot 2014.04-rc1 (Apr 26 2024 - 09:25:48)
DRAM: 240 MiB
EN7529CT
Now running in RAM - U-Boot at: 8edff000
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
bmt pool size: 81
BMT & BBT Init Success
In: serial
Out: serial
Err: serial
CPU0: found redistributor 0 region 0:8ee3d920
Net: ecnt_eth
Uip activated
use flash mac: EC:75: C:3B: 0:68
Not found TC Phy
Not found TC Phy
Not found TC Phy
Not found TC Phy
[ CPEinit ] 465: CPE init
[ cp_initCommProto ] 277: g_commProtoConfig.myMac: ec:75:0c:3b:00:68
Boot flag csum incorrect, return image0
[ os_initCPEInfo ] 279: hw ver: XX530v v1.0 00000001
[ os_initCPEInfo ] 280: sw ver: 0.4.0 3.0.0 v6096
[ os_initCPEInfo ] 287: sn: 224C077005350
[ os_initCPEInfo ] 290: pin: 11172246
[ os_initCPEInfo ] 297: endian: 0
[ os_initCPEInfo ] 300: acFlag: 0
[ CPEinit ] 489: CPE is idle
Hit any key to stop autoboot: 0
Boot flag csum incorrect, return image0
Prepare to boot image0
Boot flag csum incorrect, return image0
bootm flag=0, states=70f
## Loading kernel from FIT Image at 81800200 ...
Using 'conf@1' configuration
Trying 'kernel@1' kernel subimage
Description: ECONET Linux kernel
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x818022a4
Data Size: 2603360 Bytes = 2.5 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80088000
Entry Point: 0x80088000
Hash algo: sha1
Hash value: d1c1d958affba6a8a1e6a706ea2b292daf5414b6
## Loading fdt from FIT Image at 81800200 ...
Using 'conf@1' configuration
Trying 'fdt@1' fdt subimage
Description: ECONET Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x818002fc
Data Size: 7913 Bytes = 7.7 KiB
Architecture: ARM
Hash algo: sha1
Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24
Booting using the fdt blob at 0x818002fc
Uncompressing Kernel Image ... OK
Loading Device Tree to 8cdf2000, end 8cdf6ee8 ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.115 (compile@735b0b8fe659) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Fri Apr 26 09:33:09 UTC 2024
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: econet,en7523
bootconsole [uart0] enabled
Memory policy: Data cache writealloc
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
[c05142b8]npu_pkt_buf_addr=8dff37c0:8dff37c0
npu_pkt_buffer memblock_alloc:8dff37c0,buf_size=1600000
PERCPU: Embedded 12 pages/cpu @cdfd9000 s18048 r8192 d22912 u49152
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704
Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=EC:75:0C:3B:00:68 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220308K/260864K available (4796K kernel code, 168K rwdata, 1548K rodata, 244K init, 638K bss, 40556K reserved, 0K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbec00000 - 0xbfe00000 ( 18 MB)
.text : 0xc0088000 - 0xc06ba468 (6346 kB)
.init : 0xc06bb000 - 0xc06f8000 ( 244 kB)
.data : 0xc06f8000 - 0xc0722140 ( 169 kB)
.bss : 0xc0725000 - 0xc07c4be0 ( 639 kB)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:64 nr_irqs:64 64
CPU0: found redistributor 0 region 0:0x09080000
Architected cp15 timer(s) running at 25.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 40ns
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [uart0] disabled
bootconsole [uart0] disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys debug
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x80088280 - 0x800882d8
CPU1: found redistributor 1 region 0:0x090a0000
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (100.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
l2c_sram_size:0x0
Initializing Ecnt Event Netlink Socket
Initializing Econet Event Netlink Socket nl_sk = cd577800
ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
sgmii probe init start
sgmii:int_name: sgmii_pcie0
sgmii:int_id: 0
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= d087c100
sgmii:sgmii->pcs2_base= d087ea00
sgmii:sgmii->an_base= d0944000
sgmii:sgmii->ra_base= d0946600
sgmii:sgmii->phya_base= d0948c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=d087ea20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_pcie1
sgmii:int_id: 1
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= d094a100
sgmii:sgmii->pcs2_base= d094ca00
sgmii:sgmii->an_base= d094e000
sgmii:sgmii->ra_base= d0950600
sgmii:sgmii->phya_base= d0952c00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=d094ca20, val=0
sgmii: sync_int exit
sgmii probe init exit
sgmii probe init start
sgmii:int_name: sgmii_usb0
sgmii:int_id: 2
sgmii:int_register: inin!
sgmii:sgmii->pcs1_base= d0954100
sgmii:sgmii->pcs2_base= d0956a00
sgmii:sgmii->an_base= d0958000
sgmii:sgmii->ra_base= d095a600
sgmii:sgmii->phya_base= d095cc00
sgmii:int_register: exit!
sgmii: int_init called
sgmii:cmd_wo:reg_t=d0956a20, val=0
sgmii: sync_int exit
sgmii probe init exit
TC3162 hardware watchdog module loaded.
irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe
[crypto_k] res->name:/crypto_k@1fb70000
[crypto_k] res->start:0x1fb70000 ===
[crypto_k] res->end:0x1fb70803 ===
[crypto_k] ecnt_crypto_k->base:0xd09dc000
[trng] ecnt_trng_drv_probe
test_uc:d0826000 test_c:cd4c0000 cpu_top->base:d09e6800
[apb_timer] ecnt_timer_drv_probe
[timer] ecnt_timer->irq: 80
[timer] res->name:/apb_timer1@1fbf0100
i2c_slave init(ecnt_i2c_slave_drv_probe) done
[i2s] ecnt_i2s_drv_probe
7523 Thermal Sensor address probe done
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
io scheduler noop registered (default)
PCIe driver version: 7523.0.20210201
PCIe ref clk init.
===EN7523 PCIe init
mtk-pcie 1fa91000.pcie: pcie rc 0 linkup success
mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success
===============PCIe check===tmp_reg=========81014c3===========
mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
PCI: bus2: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit]
pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref]
pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit]
pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [mem 0x20200000-0x203fffff]
mt7512_pcie_fixup: 0x1438 = 20000015
mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12
RC0 Link Traing Result: 10120008
===========RC0 set conf space INTx=============
mt7512_pcie_fixup: 0x2438 = 20200015
mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12
RC1 Link Traing Result: 10120008
===========RC1 set conf space INTx=============
ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162
ECNT ring buffer init success
brd: module loaded
SPI Flash Init Start
Found no SPI flash device
IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6)
Set SPI Clock to 50 Mhz
spi_nand_probe: mfr_id=0xc8, dev_id=0x1
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000
spi nand flash
tc3162: flash device 0x02000000 at 0x00000000
EN7512 mtd init: spi nand probe enter
[spi_nand_setup] : Enter
nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01
nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand_scan_ident ok
[spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11
bmt pool size: 81
BMT & BBT Init Success
Creating 11 MTD partitions on "EN7512-SPI_NAND":
0x000000000000-0x000004a00000 : "whole"
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x0000000a0000 : "romfile"
0x0000000a0000-0x0000002a0000 : "misc"
0x0000002a0000-0x000000aa0000 : "kernel"
0x000000aa0000-0x000002500000 : "rootfs"
0x0000002a0000-0x000002500000 : "firmware"
0x000002500000-0x000002d00000 : "kernel_slave"
0x000002d00000-0x000004760000 : "rootfs_slave"
0x000002500000-0x000004760000 : "firmware_slave"
0x0000049e0000-0x000004a00000 : "reserve"
rootfs
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
USB driver version: 7523.3.20210202
port 0 u2_slew_rate_cal_7523
FM_OUT value = 105(0x00000069)
SR calibration value = 5
port 1 u2_slew_rate_cal_7523
FM_OUT value = 105(0x00000069)
SR calibration value = 5
xhci-hcd 1fab0000.xhci: xHCI Host Controller
xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1
xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci-hcd 1fab0000.xhci: xHCI Host Controller
xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver cypress_m8
usbserial: USB Serial support registered for DeLorme Earthmate USB
usbserial: USB Serial support registered for HID->COM RS232 Adapter
usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3442 buckets, 13768 max)
ludewei add module
gre: GRE over IPv4 demultiplexor driver
IPv4 over IPsec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Ebtables v2.0 registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
Registering SWP/SWPB emulation handler
tc3162ser_startup
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Freeing unused kernel memory: 244K
busybox init and set aff
starting pid 437, tty '': '/etc/init.d/rcS'
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directusbcore: registered new interface driver usb-storage
ory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory
insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory
tp_board: loading out-of-tree module taints kernel.
Register flash device: flash0
rcS (437): drop_caches: 3
start XPON related APP
/tmp/cfg_load is not exist,left time 30
svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so
svchost_parse_print_conf: Entry = svc_cfg_main
svchost_parse_print_conf: Param = 111
random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
shm_pool_init: base[20000000] size[00200000]]
shm_pool_init: Init Done!
random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available)
svc_cfg_start: ........
Load cfg from file [/var/romfile.cfg] .....
tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
gic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use backup romfile to check!
Couldn't open mtd:reservearea!
mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288
Unlocking reservearea ...
Could not open mtd device: reservearea
[BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea
tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
agic
tar: short read
cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
stat '/tmp/ctromfile.cfg': No such file or directory
Use default romfile to check!
mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432
Unlocking reservearea ...
Could not open mtd device: reservearea
[DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea
tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===>
agic
tar: short read
cp: can't st[check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===>
at '/tmp/ctromfile.cfg': No such file or directory
Use usrfs romfile to check!
/tmp/cfg_load is not exist,left time 29
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
ctromfile.cfg
<<call handle_proline_paras>>
mtd[readflash]:device=[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
handle_proline_paras 1564 SSID:ChinaNet-AP.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
han[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
dle_pr[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
oline_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
aras 156[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
4 WPAP[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
SK:1234[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
5678.
[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
han[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
dle_prorandom: ubusd: uninitialized urandom read (4 bytes read, 37 bits of entropy available)
line_paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
1564 [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
SSID:[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
ChinaNrandom: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
et-AP.
handle_pro[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1.
line_paras 1564 WPAPSK:12345678.
handle_proline_pararandom: ubusd: uninitialized urandom read (4 bytes read, 39 bits of entropy available)
s 1564 SSID:ChinaNet-AP.
handle_proline_paras 1564 WPAPSK:12345678.
handle_proline_paras 1564 SSID:ChinaNet-AP.
handle_proline_paras 1564 WPAPSK:12345678.
handle_proline_paras 1564 web_passwd:1234.
handle_proline_paras 1564 SerialNumber:FHTT12345678.
parse proline para Password fail.
parse proline para Password fail.
handle_proline_paras 1564 Mode:GPON.
root.mesh.apclibh.entry.1:BhProfileSsid not found.
root.mesh.apclibh.entry.1:BhProfileWpaPsk not found.
root.mesh.apclibh.entry.2:BhProfileSsid not found.
root.mesh.apclibh.entry.2:BhProfileWpaPsk not found.
handle_proline_paras 1564 (null):1.
cfg_save_object: open file [/tmp/var/romfile.cfg] fail
----> Load config file fail.
svc_cfg_start: ........ ok [20001030]!
svchost_get_event_val: get param fail [0]
start omci
module_sel: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
svchost_prandom: ubusd: uninitialized urandom read (4 bytes read, 52 bits of entropy available)
arserandom: ubusd: uninitialized urandom read (4 bytes read, 52 bits of entropy available)
_print_conf: Path = /lib/libcentral_ctrl_svc.so
svchost_parse_print_conf: Path = /lib/libpon_svc.so
svchost_parse_print_conf: Entry = svc_central_ctrl_main
svchost_parse_print_conf: Entry = svc_pon_main
svchost_parse_print_conf: random: ubusd: uninitialized urandom read (4 bytes read, 56 bits of entropy available)
aramecnt_register_cpu_interrupts = 111
svchost_parse_print_conf: Param = 111
svchost_parse_print_conf: Path = /lib/libother_svc.so
svchost_parse_print_conf: Entry = svc_other_main
svchost_parse_print_conf: Param = 111
random: ubusd: uninitialized urandom read (4 bytes read, 61 bits of entropy available)
svchost_get_event_val: get param fail [0]
svc_other_init: ...... reg event ok
random: ubusd: uninitialized urandom read (4 bytes read, 62 bits of entropy available)
svchostsvc_centrl_ctrl_init: ...... reg event ok
_get_event_val: get param fail [0]
PID=5dev mount is start!
4config
5 0
event receive pthread_create OK, keep going......
svchost_get_event_val: get param fail [0]
svc_pon_int: .....TC3162 LED Manager 0.1 init
tcledctrl version: tcledctrl V1.1.0.0 (Apr 26 2024-09:40:40).
led path:/userfs/7529_62led.conf
. reg event ok
svc_pon_int: ...... reg method ok
cfg svc load done, 0 ms
[svc_cfg_load_special_info][581]SET [omci_lib_set_max_ports_list] Result=0
Couldn't open mtd:reservearea!
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reserveanlksock_create:nlksock create err:Protocol not supported!
reactive_notify_handler: nlksock_create fail
a
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
open /proc/tc3162/reset_button faile.
open /proc/tc3162/button_type faile.
open /proc/tc3162/led_switch_button faile.
mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory
[svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152
Unlocking reservearea ...
Could not open mtd device: reservearea
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.tccicmd V1.1.0.0 (Apr 26 2024-09:40:46)
ERROR!Create /etc/fwTCver.conf fail!
conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][661]SET [oam_lib_set_hardware_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open
SIFMaster 0.1 init
===== Interface 0 is ON =====
Register sifm cmd
/etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0
mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720
Unlocking reservearea ...
Could not open mtd device: reservearea
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
Can't open /etc/deviceParaStatic.conf
[svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0
(gdump_mode_sel): GDUMP sel has switch to 3
ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:2
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:3
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:1
ifc_set_action: cpu:1, nbq:7
ifc_set_action: cpu:1, nbq:8
TP_User Ecnt ponTime:OMCI Startup
macType = 0
flashQdmaInit = 0x33
netif_napi_add() called with weight 256 on device lan_int2_if
ether.c:v1.00-NAPI 29.Mar.2015
eth0: FE MAC Ethernet address: EC:75:0C:3B:00:68
Use Internal switch ,type 10
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9
GE Rext AnaCal Done! (6)(0x26)
GE Rext AnaCal Done! (6)(0x26)
GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b)
GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (1)(0x1)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx offset AnaCal Done! (5)(0x24)
GE Tx offset AnaCal Done! (4)(0x23)
Unlocking config ...
Could not open mtd device: config GE Tx amp AnaCal Done! (3) (0x23)
GE Tx amp AnaCal Done! (3) (0x23)
GE Tx amp AnaCal Done! (9) (0x29)
GE Tx amp AnaCal Done! (13) (0x2d)
[tcPhyInit] in [tcPhyInit] out , r31 = (9, 0x0)
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9
GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (1)(0x20)
GE Tx offset AnaCal Done! (5)(0x24)
GE Tx offset AnaCal Done! (2)(0x21)
GE Tx offset AnaCal Done! (2)(0x21)
GE Tx amp AnaCal Done! (10) (0x2a)
GE Tx amp AnaCal Done! (6) (0x26)
GE Tx amp AnaCal Done! (16) (0x30)
GE Tx amp AnaCal Done! (14) (0x2e)
[tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0)
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9
GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx amp AnaCal Done! (8) (0x28)
GE Tx amp AnaCal Done! (13) (0x2d)
GE Tx amp AnaCal Done! (8) (0x28)
GE Tx amp AnaCal Done! (17) (0x31)
[tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0)
tcPhyVerLookUp 2446 94A1
7523 Ge,
, port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9
GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c)
GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3)
GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29)
GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a)
GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (3)(0x22)
GE Tx offset AnaCal Done! (4)(0x23)
GE Tx offset AnaCal Done! (5)(0x24)
GE Tx amp AnaCal Done! (10) (0x2a)
GE Tx amp AnaCal Done! (4) (0x24)
GE Tx amp AnaCal Done! (4) (0x24)
GE Tx amp AnaCal Done! (11) (0x2b)
[tcPhyInit] in mount: can'
not found str : MAP, erase and mount again
t fidev_mount is ok
nd /dev/mtdblock in /etc/fstab
[tcPhyInit] out , r31 = (12, 0x0)
eth0: starting interface.
netif_start_queue
macType = 0
flashQdmaInit = 0x33
fe resource init start
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
16 acnt1 id has been used, there is no left
Ralink HW NAT Module Enabled
you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512
HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384
IP check use Black List
EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw
[c0514268]isForceToCpu=0:0
copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xd0f00000
copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xd0b80000
[C0]core freq at 333000000 Hz
[C0]timer_init: Timer clk is running at 125 Mhz
[C0]wcid_counter_init:0
[C0]wcid_counter_init:1
[C0][NPU] ba_node_init...
[C0]baNode_array_init
[C0]counter_init:2
[C0][NPU] queue_mutex_init...
[C0]qdma_init
[C1]core1_main
[C2]timer_isr Store Value 1e903000, val[C2]core2_main
[C3]core3_main
[C3]do npu_enq_deq_init
[c0514244]npu_pkt_buf_addr=8dff37c0
npu_wifi_offload_get_pkt_buf_addr=8dff37c0
[c0514244]npu_pkt_buf_addr=8dff37c0
[C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=8dff37c0, 8dff37c0
npu_wifi_offload_get_force_to_cpu_flag=0
isForceToCpu=0
[C0](core0_main) just return, because QDMA driver for ARM is not ready
mt_whnat: Unknown symbol glb_var_wed_ring (err 0)
mt_whnat: Unknown symbol hc_get_chip_ops (err 0)
mt_whnat: Unknown symbol mt_wlan_hook_unregister (err 0)
mt_whnat: Unknown symbol glb_var_wdma_ring (err 0)
mt_whnat: Unknown symbol mt_wlan_hook_register (err 0)
mt_whnat: Unknown symbol hc_get_hif_ctrl (err 0)
mt_whnat: Unknown symbol glb_var_whnat_fbuf (err 0)
mt_whnat: Unknown symbol wlan_operate_get_frag_thld (err 0)
mt_whnat: Unknown symbol hc_get_chip_tx_token_nums (err 0)
mt_whnat: Unknown symbol hc_get_chip_sw_tx_token_nums (err 0)
insmod: can't insert '/lib/modules/mt_whnat.ko': unknown symbol in module, or unknown parameter
tso_lan: tso_v2.c [201]: dscpDmaAddr =8acd0000
tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0
tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0
tso_proc_init.
val_string:add v4 - 445 - -
dport:0, sport:445, daddr:0, saddr:0
---- 7570_bob.conf ----
---- cp -f /etc/7570_bob.conf /tmp/ ----
do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=aa data[1]=06 data[2]=cd data[3]=05
do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success!
---- flashtool readflashtobob ----
______ XPON_PHY init ______
little endian
NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0
xPON PHY initialization done
E3 patched
EN7571 found!
FLASH matrix got
PWRADC offset = 0x307e
PWRADC ready
BG 1.76V = 0x28c
BG 0.875V = 0x148
RSSI_Vref = 0x21b
RSSI_V = 0x29b
eFuse value = 0xe
eFuse offset = 4.2'C
Start GPON Tx Calibration
CDR disabled
RGS_T0C = 0x52
RGS_T1C = 0x54
CDR enabled
APD initialization done
en7571_reg_init
Initial current loaded
PWR/ER loaded
TIASD = 0x1f
Rx LOS is set
Internal DDMI Enabled
KT Enabled
EN7571 Initialization Done!
PON PHY driver version is 2100825.116.11
xPON driver initialization
Alloc data struct memory successful, 36508
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
the channel id_is must between 0 and 15
XPON Mapping Module init OK!
vtag_drv_init
tc_multiwan version: tcsmux V1.1.0.0 (Apr 26 2024-09:40:51).
pon_vlan_init
Multi Lan port
initilize xpon igmp module....done!
pon_mac_filter_init
Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon_multicast.ko': No such file or directory
device eth0 entered promiscuous mode
device eth0.1 is not a slave of br0
device eth0.2 is not a slave of br0
derandom: nonblocking pool is initialized
vice eth0.3 is not a slave of br0
device eth0.4 is not a slave of br0
device eth0 is already a member of a bridge; can't enslave it to bridge br0.
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
device eth0.1 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
device eth0.2 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
device eth0.3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready
device eth0.4 entered promiscuous mode
ifconfig: ioctl 0x8913 failed: No such device
interface eth0.5 does not exist!
insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory
insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory
insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory
insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory
ifconfig: SIOCSIFMTU: Invalid argument
ifconfig: SIOCSIFMTU: Novlan tag restore switch : enable
such device
insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory
start ponmgr_cfg
MTK DSP support
rcS (437): drop_caches: 3
rcS.sdk init done!
creat_domain_proc ok
tp_domain init ok
VoIPBasic_Common SIPProtocol is SIP
prevSipStatus: 0, curSipStatus: 0
voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0
[1970-1-1 Thu 00:00:14.110542]omci start!
[1970-1-1 Thu 00:00:14.114732]main gponOmciCmsgsrvInit
[1970-1-1 Thu 00:00:14.124919]OMCI wait for DM init...
device recognition register success
status:
DSPCore[Ver:TVB1.0.23.800-1]
[1] PCM V2.4 (Jun 29 2021 03:11:21)
bind irq-113 to CPU1
PCM_INT=28
pcm[Ver:TVB1.0.23.800-1]
lec[Ver:TVB1.0.23.800-1]
[14.522][cos] 415 - ERROR: before cpu mask 00000003
[14.523][cos] 430 - ERROR: after cpu mask 00000001
SYS_HCLK=250
Major Num:233, device: spi
spi[Ver:TVB1.0.23.800-1]
========fxs3 init start========
========fxs3 init complete========
.
init mod-slic3
slic3[Ver:TVB1.0.23.800-1]
mode=
ISI
init mod-ksocket
ksocket[Ver:TVB1.0.23.800-1]
ortp[Ver:TVB1.0.23.800-1]
monitor value xxxxxxx
init mod-acodec
acodec[Ver:TVB1.0.23.800-1]
ponTime:ONU Ready
init mod-foip3
foip3[Ver:TVB1.0.23.800-1]
Interface name length cannot exceed 15 characters.
Interface name length cannot exceed 15 characters.
Silabs SLIC type selected by SW makefile compile option
[4294938872][slic][INFO][gpio_clocksrc_init:L2399]ISI
[4294938872][spi][INFO][SPI_Reset:L473]
SPI_Reset 2
[15.813][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
slic deviceVerify ProSLIC_Version 9.1.0
Silabs SLIC Reset
REG_0 = 0xaa ,device[0], Part_num 0x5, Revision 0x2
device[0]:deviceVerify Success!
SPI Reset times:1
pcm1 ch num:1 pcm2 ch num:0
fxs[Ver:TVB1.0.23.800-1]
[fxs_init_action](1344)noinit=0
pcm1 ch num:1 pcm2 ch num:0
Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1)
deviceInit on DeviceId = 0
ProSLIC_createControlInterface = 0
ProSLIC_createDevice = 0
get_start_chanid=0
ProSLIC_createChannel = 0
ProSLIC_SWInitChan = 0
device [0] chanPvt[0].chanType 1
device [0] chanPvt[0].chipType 6
Si3218x_Init_with_Options(640) size = 1 init_opt = 0
SiVoice: Channel 0: Type = PROSLIC Rev = 2
ProSLIC:loading patch: 06302015
.
Si3218x: Channel 0 : VBAT Up = 59.440 v
ProSLIC:Starting LB Cal on channel 0
.init mod-vdsp for 1 channels 2 sessions
vdsp[Ver:TVB1.0.23.800-1]
===============================
|| MTK DSP init successfully ||
===============================
pid 2's current affinity mask: 3
pid 887's current affinity mask: 1
IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
___ COUNTRY SETTING ___
ring_idx : 0
imp_idx : 0
ProSLIC:PCMStart
slic_set_gainLv - fffffffa / 0
pid 887's new affinity mask: 2
fxsSetLine[0]state 0x9 State UNKNOWN !
pid 2's current affinity mask: 3
pid 2's current affinity mask: 3
pid 2's current affinity mask: 3
pid Dump SLIC[0] register:
=================================
00 01 02 03 04 05 06 07 08 09
=================================
100: aa 00 000 1f 00 40 00 a2 e5 ff
10: 25 13 00 00 00 20 00 00 00 00
20: 00 00 00 02 00 00 00 00 00 00
30: 11 00 00 10 00 008 00 02 00 40
40: 1f 00 7d 00 00 59 04 10 66 00
50: 00 00 00 00 00 00 00 00 ff 00
60: 00 00 e4 00 00 00 00 00 f09 00
70: 00 00 00 00 00 00 02 00 00 00
80: 3f 01 b7 03 af 05 0e 0f ed 10
90: 40 07 9f 06 c1 11 24 05 80 01
100:' 00 01 00 00 00 00 00 00 00 00
110: 00 00 47 01 47 00 02 ff 38 00
120: 87 0a 39 05 00 20 03 00
=================================
s currwrite address(47) value : 0x8
ent affinity mask: 1
pid 1089's new affinity mask: 2
rcS (437): drop_caches: 3
rcS init done!
Please press Enter to activate this console. TC3162 hardware watchdog initialized
cpu 1
cpu 0
sleep 90s!
[20.144][cmm] 2412 - ERROR: software version is not match, in config, version = 0
[20.164][cmm] 5116 - ERROR: Base config length is too long
[20.164][cmm] 2489 - ERROR: Read ISP config from flash failed. ret = 1
[20.166][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/default_config.xml!, about to open file /etc/default_config.xml
[20.312][cmm] 582 - ERROR: Meet unrecognized object node "X_TP_SysMode", skip the node
[20.312][cmm] 582 - ERROR: Meet unrecognized object node "X_TP_IPTV", skip the node
[20.341][cmm] 582 - ERROR: Meet unrecognized object node "QoS", skip the node
[20.342][cmm] 587 - ERROR: Meet unrecognized parameter node "ToTagMatching", skip the node
[20.355][cmm] 587 - ERROR: Meet unrecognized parameter node "IsDefaultAgent", skip the node
[20.356][cmm] 587 - ERROR: Meet unrecognized parameter node "EncodeType", skip the node
[20.358][cmm] 587 - ERROR: Meet unrecognized parameter node "EncodeType", skip the node
xpon_phy NOT start yet!! [pon_phy_set_api_dispatch:1404] gpPhyPriv->is_phy_start = 0
Disable GPON ONU
[20.360][cmm] 587 - ERROR: Meet unrecognized parameter node "EncodeType", skip the node
[20.365][cmm] 587 - ERROR: Meet unrecognized parameter node "WanNumberOfEntries", skip the node
[20.366][cmm] 587 - ERROR: Meet unrecognized parameter node "NumberOfDetectionThread", skip the node
[20.378][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002
[20.381][cos] 642 - ERROR: Disable gpon driver before true SN set
[20.394][cos] 246 - ERROR: COS wait for OMCI init...
[1970-1-1 Thu 00:00:21.200101]DM init use 7 seconds!
[1970-1-1 Thu 00:00:21.205554][main][1116]:Enter OMCI State Machine, OMCI_STATE_START!
[1970-1-1 Thu 00:00:21.374248][omciAddVendorMeToStdMeTable][1115] before DM operation ,totalSize(2)
[ omciAddVend
[1970-1-1 Thu 00:00:21.424616][omciAddVendorMeToStdMeTable][1166] toalTblSize(2) a/b (0)
orMeToStdMe
[1970-1-1 Thu 00:00:21.433537] initFilterMeInfo toalTblSize = 3
Table ] 1132:
[1970-1-1 Thu 00:00:21.440680][main][1134]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE!
1#1
[ o
[1970-1-1 Thu 00:00:21.451792][omciInitCapability][539] omciInitCapability In
mciAdd
[1970-1-1 Thu 00:00:21.459523]pPortList(48,248,47,47,47,47,32)
Vendor
[1970-1-1 Thu 00:00:21.465785]pPort(48)
MeT
[1970-1-1 Thu 00:00:21.469887]pPort(248)
oStd
[1970-1-1 Thu 00:00:21.474198]pPort(47)
Me
[1970-1-1 Thu 00:00:21.478170]pPort(47)
Tabl
[1970-1-1 Thu 00:00:21.482306]pPort(47)
e ]
[1970-1-1 Thu 00:00:21.486527]pPort(47)
113
[1970-1-1 Thu 00:00:21.490600]pPort(32)
6: 2#1,
[1970-1-1 Thu 00:00:21.495100][omciInitCapability][635] getNext Dev2 currGponAuthObj SN(),SNtype(1)
1
[ om
[1970-1-1 Thu 00:00:21.504805][omciInitCapability][666] omciSaveOnuCapSn_to_lib error
ciAddV
[1970-1-1 Thu 00:00:21.513186][omciInitCapability][682] currOmciCapObj.vendorId IS (TPLG)
endorMeT
[1970-1-1 Thu 00:00:21.522077]read_flash:read In - 8 bytes in 77463552
oStdMeTabl
[1970-1-1 Thu 00:00:21.529529]read_flash:read In - 8 bytes in 77463552
e ] 1132: 1#2
[ omciAddVendorMeToStdMeTable ] 1136: 2#2,1
omciSaveAuth_to_lib_data(352): gponSn should be even
[1970-1-1 Thu 00:00:21.550657]read_flash:read In - 512 bytes in 2752512
[1970-1-1 Thu 00:00:21.557997]read_flash:read In - 512 bytes in 38797312
svchost_get_event_val: get param fail [0]
[1970-1-1 Thu 00:00:21.579066]do not config omci intance by file info
ctromfile.cfg
[1970-1-1 Thu 00:00:21.610703][main][1144]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT!
sh: /bin/mv: not found
set olt type: 0
ponTime:Connection Start
working_mode: 1
[42949394590ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0
[42949394600ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1
[42949394610ms][phy_init.c:1946] PON PHY scu_reset_init mode=1
Couldn't open image file: /tmp/tc_st[42949394620ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1
ore_romfile.conf!
[1970-1-1 Thu 00:00:21.679742][main][1172]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN!
Unlocking reservearea ...
Could not open mtd device: reservearea
Couldn't open image file: /tmp/tc_store_romfile.conf!
[22.410][cos] 252 - ERROR: OMCI init use 2 seconds!
===========>manufacture:0, ISPflag:0
ioctl: No such device
ifconfig: SIOCSIFHWADDR: No such device
IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br0: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
device eth0.1 entered promiscuous mode
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 entered promiscuous mode
ifconfig: ioctl 0x8913 failed: No such device
sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory
interface eth0.5 does not exist!
br_agc: port 1(eth0.1) entered forwarding state
br_agc: port 1(eth0.1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br_agc: link becomes ready
sendto: No such file or directory
line(593) Msg.type(2014) pid(851) errno(2) ret(-1)
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
[25.220][cos] 121 - ERROR: CQC:tm_start:25, tm_end:25
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
[27.230][cos] 121 - ERROR: CQC:tm_start:25, tm_end:27
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
[29.240][cos] 121 - ERROR: CQC:tm_start:25, tm_end:29
[err] syslogd[syslogd_msg_process --673] syslogd : log module is not config
[31.250][cos] 121 - ERROR: CQC:tm_start:25, tm_end:31
[31.250][cos] 137 - ERROR: CQC:FAILED!
[31.250][cos] 702 - ERROR: Expire time!
device eth0.1 left promiscuous mode
br_agc: port 1(eth0.1) entered disabled state
device eth0.2 left promiscuous mode
br_agc: port 2(eth0.2) entered disabled state
device eth0.3 left promiscuous mode
br_agc: port 3(eth0.3) entered disabled state
device eth0.4 left promiscuous mode
br_agc: port 4(eth0.4) entered disabled state
interface eth0.5 does not exist!
[31.529][cmm] 591: num of CPU core = 2.
[31.529][cmm] 601: parent pid 851
[31.637][cmm] 608: start creating dropbear RSA key at CPU core 1.
[31.638][cmm] 618: child pre cpu mask 00000001
[31.638][cmm] 632: child post cpu mask 00000002
[31.638][cmm] 636: Try create dropbear RSA key loop=0 ...
Generating 2048 bit rsa key, this may take a while...
ip6tables: No chain/target/match by that name.
[31.996][cmm] 3192 - ERROR: Open TZ file error!
killall: dnsmasq: no process killed
[32.378][cmm] 158 - WARN: Empty DNSServer()
[32.529][cmm] 158 - WARN: Empty DNSServer()
[32.540][cmm] 158 - WARN: Empty DNSServer()
iptables: Bad rule (does a matching rule exist in that chain?).
ifconfig: SIOCSIFHWADDR: Cannot assign requested address
bridge name br0 has exist
bridge name br0 has exist
device br0 already exists; can't create bridge with the same name
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
done
[32.789][cmm] 203 - ERROR: ifName is eth0, vid is 5
[32.810][cmm] 203 - ERROR: ifName is eth0, vid is 4
vconfig: ioctl error for add: File exists
[32.822][cmm] 203 - ERROR: ifName is eth0, vid is 3
vconfig: ioctl error for add: File exists
[32.835][cmm] 203 - ERROR: ifName is eth0, vid is 2
vconfig: ioctl error for add: File exists
[32.848][cmm] 203 - ERROR: ifName is eth0, vid is 1
vconfig: ioctl error for add: File exists
[32.860][cmm] 203 - ERROR: ifName is eth0, vid is 0
sh: can't create /proc/tplink/eth_vlan: nonexistent directory
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[33.008][cmm] 257 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName:
iptables: Bad rule (does a matching rule exist in that chain?).
Bad argument `REJECT'
Try `ip6tables -h' or 'ip6tables --help' for more information.
[33.037][ipv6] 981 - WARN: Could not find pid of dibbler-server with interface name is br0!
Starting daemon...
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
br0: port 1(eth0.1) entered disabled state
device eth0.1 left promiscuous mode
br0: port 1(eth0.1) entered disabled state
br0: port 2(eth0.2) entered disabled state
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
br0: port 3(eth0.3) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
device eth0.4 is not a slave of br0
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
device eth0.4 is not a slave of br0
device eth0.5 is not a slave of br0
device eth0.4 is not a slave of br0
sh: can't create /sys/devices/virtual/net/eth0.4/brport/multicast_router: nonexistent directory
[34.162][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public
[34.162][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next.
[34.163][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public
[34.163][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next.
[34.164][cmm] 2021 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
[ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf
[36.692][ntpc] 785 - ERROR: open DNS error
NTP server list:
[37.966][cmm] 648: create dropbear RSA key success.
[37.966][cmm] 655: start creating dropbear DSS key at CPU core 1.
[37.966][cmm] 659: Try create dropbear DSS key loop=0 ...
Generating 1024 bit dss key, this may take a while...
WiFi@C12L1,get_dbg_setting_by_profile() 4428: debug level setting=INDEX0_debug_level not found!!
WiFi@C12L1,get_dbg_setting_by_profile() 4451: debug option setting=INDEX0_debug_option not found!!
pci 0000:00:00.0: enabling device (0140 -> 0142)
mt_pci_slave 0000:01:00.0: enabling device (0140 -> 0142)
!!HIF_RX_EVENT Only
pci 0000:00:01.0: enabling device (0140 -> 0142)
rtpci 0000:02:00.0: enabling device (0140 -> 0142)
npu_offload_mapping upcount=2
npu_offload_mapping PCIE_FUNCTION_MAX_NUM=10npu_offload_mapping chipid=790a
=========retvalue=790a14c3=========
=========chipid=790a=========
npu_offload_mapping EcntPciePortTypeMask=8
mt7916_init()-->
Use the default iPAiLNA bin image!
<--mt7916_init()
RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(288) > 128!
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX1
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX2
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX3
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX4
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX5
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX6
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX7
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX8
WiFi@C12L1,match_index_by_chipname() 513: not find chip name INDEX9
WiFi@C12L2,match_index_by_chipname() 518: Not find slot id, back to old rule.
msta_ifname not found
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
!!HIF_RX_EVENT Only
whnat_module_init(): module init and register callback for whnat
create whnat_ctrl ok!!!
wed_slot_map_get(): assign slot_id:0 for entry: 0!
wed_slot_map_get(): assign slot_id:1 for entry: 1!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
msta_ifname not found
whnat_cap_support(): chip_id=7906 is in WHNAT support list
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1
wed_init(1): irq=91,base_addr=0xd5772000
wed_ring_init(): wed ring init result = 0
whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]
create wed ok!!!
wdma_init(): wdma(1) base addr=d577e400
wdma_init(): wdma(1) irq[0]=87
wdma_init(): wdma(1) irq[1]=88
wdma_init(): wdma(1) irq[2]=89
wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91
wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1
whnat_probe(): probe fail since whnat is full!
whnat_dev0: probe of 1fa02000.wed2 failed with error -1
WiFi@C02L1,HwCtrlInit() 612: ser_init() return NDIS_STATUS_FAILURE
WiFi@C00L0,multi_profile_merge_increase() 727: parm is SSID, no need trim space
WiFi@C00L0,multi_profile_merge_increase() 722: parm is WPAPSK, no need trim space
WiFi@C00L1,multi_profile_merge_radius_key() 797: RTMPGetKeyParameter fail!
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS0 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS1 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS2 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS3 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS4 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS5 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS6 PhyMode=78
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS7 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS8 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS9 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS10 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS11 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS12 PhyMode=177
WiFi@C12L1,RTMPWirelessModeCfg() 592: Init: BSS13 PhyMode=177
WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
WiFi@C23L3,auto_ch_select_set_cfg() 3508: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 382: Warning:ACS Enable and the 2G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
WiFi@C00L2,RTMPChannelCfg() 375: Warning:ACS Enable and the 5G Channel of config parameter must set 0:
[39.229][cmm] 671: create dropbear DSS key success.
[39.229][cmm] 680: parent pid 851
[39.229][cmm] 688: parent pre cpu mask 00000001
[39.230][cmm] 702: parent post cpu mask 00000003
WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
WiFi@C12L1,SCS_Enable_set_cfg() 716: SCSEnable [0]= 0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=0, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=1, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=2, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=3, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=4, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=5, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=6, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=7, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=8, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=9, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=10, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=11, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=12, Desired MFPC=0
WiFi@C15L1,Set_PMFMFPC_Proc() 1715: [PMF] :: apidx=13, Desired MFPC=0
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WscKeyASCII=8
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
WiFi@C12L1,rtmp_read_wsc_user_parms() 9829: input parameter[WscDeviceName] incorrect
DriverModel=2
!!!! do phy and virtual address mapping
dramBaEntry_pa=84c00000
PciePortType=3
after :phy_add= 20000000,ring_idx=2
[C0][NPU] npu_set_pcie_base, addr=200d4540, band_idx=0
[C0][npu_set_pcie_base] 2.4G pcieBase 200d4540 mem_base 200d4540, hw_rx_desc=0
after :phy_add= 20200000,ring_idx=0
[C0][NPU] npu_set_pcie_base, addr=202d8550, band_idx=1
[C0][npu_set_pcie_base] 5G pcieBase 202d8550 mem_base 202d8550, hw_rx_desc=0
[C0][NPU] npu_init...
[C0]=======================
[C0]NPU Version: MT7916_NPU_V1.001.testv2
[C0]=======================
[C0]Support NPU Wifi ffload
[C0][NPU] pkt_queue_init...
[C0]counter_init:1
[C0][NPU] Enter npu_npu_init_rxd_5G, band_idx=1, rx_ring_size=1536
WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000
AllocSize 6000 AllocVa d58ce000, .AllocPa 1e800000
[C0][NPU] npu_init...
[C0]=======================
[C0]NPU Version: MT7916_NPU_V1.001.testv2
[C0]=======================
[C0]Support NPU Wifi ffload
[C0][NPU] pkt_queue_init...
[C0]counter_init:0
[C0][NPU] Enter(2.4G) npu_npu_init_rxd, band_idx=0, rx_ring_size=1536
WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020
AllocSize 6000 AllocVa d58d2020, .AllocPa 1e806020
register rx data done task c9c0e154
register rx data done task c7481154
register rx data done task c7481154
=====>register 2G
hostdapt_registe_wifitask 0
register rx data done task c7481154
=====>register 5G
hostdapt_registe_wifitask 1
wdma_dma_ctrl(): WDMA_GLO_CFG=40000450
=========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000
using E1 ROM patch
using E1 RAM
current sync CR = 0x1
Built date: 20230825174652a
Platform: ALPS
HW/SW version: 0x8a108a10
Patch version: 0xffffffff
current sync CR = 0x1
Chip ID: 0x13
Eco version: 0x00
Region number: 0x09
Format version: 0x02
Format flag: 0x01
Ram version: ____000000
Built date: 20230825174715
Common crc: 0x5b89c7db
Release info: header tag = 0, total length = 80
tag 1, padding length = 1, tag length = 75
payload: t-neptune-main-2111-7916-imp-MT7916_E1_ASIC_ROM_RAM_REBB_IMP-20230825174602
Chip ID: 0x00
Eco version: 0x00
Region number: 0x03
Format version: 0x02
Format flag: 0x01
Ram version: DEV_000000
Built date: 20230825174802
Common crc: 0x7e5821c5
Release info: header tag = 0, total length = 0
current sync CR = 0x7
efuse_probe: efuse = 100002
flash_read(): read from address:0x120000, len:0x1000!
WiFi@C02L1,is_cal_free_ic() 749: [a-die version:1]
WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
WiFi@C01L1,AntCfgInit() 3098: Not support for HIF_MT yet!
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku_2g.dat
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku_5g.dat
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku-bf_2g.dat
MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!!
MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7916-sku-bf_5g.dat
WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
WiFi@C12L1,SCS_init() 880: INIT SCSEnable [0]= 0
WiFi@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,red_tail_drop_init() 83: red_tail_drop_init: available token:7680, whnat_en:1
WiFi@C00L1,MtCmdCr4RedSet() 917: MtCmdCr4RedSet: (ret = 0)
WiFi@C00L1,SendRedCmd() 1052: SendRedCmd:(ret = 1)
jiffies=ffff9bec, POLLING_MODE_DETECT_INTV=300
==ecnt_wifi_rx_rps_hook===
WiFi@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 0
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](0): get wdev_op_lock.
WiFi@C00L3,BuildChannelList() 518: BandIdx = 0, PhyMode = 78, ChListNum = 11:
WiFi@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G.
WiFi@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=1, band_bw[band_idx]=0
phy_freq_adjust : no prim_ch value for adjust!
WiFi@C23L1,operate_loader_phy() 395: phy_freq_adjust failed!
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId0 = ec:75:0c:3b:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock.
WiFi@C23L1,HcGetBandByChannel() 1056: No hdev parking on channel:0, just return a default band_idx 0!
WiFi@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=0 RadioOn
mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
WiFi@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x21c/0x4d4 [mt7916_ap])!!
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=1, ctrl_ch2=0, cent_ch=1 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=1, ctrl_ch2=0, cent_ch=1, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=6, ctrl_ch2=0, cent_ch=6, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=7, ctrl_ch2=0, cent_ch=7, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=8, ctrl_ch2=0, cent_ch=8, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=9, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=10, ctrl_ch2=0, cent_ch=10, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=11, ctrl_ch2=0, cent_ch=11, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)
WiFi@C08L1,UpdateBeaconHandler() 1882: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2f8/0x4d4 [mt7916_ap])!!
WiFi@C23L3,SelectClearChannelBusyTime() 1864: ====================================================================
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 1 : Busy Time = 9073, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 2 : Busy Time = 11945, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 3 : Busy Time = 7504, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 4 : Busy Time = 9509, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 5 : Busy Time = 6691, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 6 : Busy Time = 7519, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 7 : Busy Time = 6024, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 8 : Busy Time = 11865, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 9 : Busy Time = 14925, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 10 : Busy Time = 11833, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1870: Channel 11 : Busy Time = 11617, Skip Channel = FALSE, BwCap = TRUE
WiFi@C23L3,SelectClearChannelBusyTime() 1873: ====================================================================
WiFi@C23L3,SelectClearChannelBusyTime() 2143: Rule 3 Channel Busy time value : Select Primary Channel 7
WiFi@C23L3,SelectClearChannelBusyTime() 2145: Rule 3 Channel Busy time value : Min Channel Busy = 6024
WiFi@C23L3,SelectClearChannelBusyTime() 2150: Rule 3 Channel Busy time value : BW = 20
WiFi@C23L3,SelectClearChannelBusyTime() 2189: [SelectClearChannelBusyTime] - band0 END
WiFi@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
WiFi@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=7, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0)
WiFi@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=7, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0)
WiFi@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G.
WiFi@C23L3,zero_wait_dfs_switch_ch() 823: outband ch 0, ch_stat 0
WiFi@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:0, CfgMode:0
WiFi@C15L2,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(0)
WiFi@C01L3,wifi_sys_linkup() 1155: wdev idx = 0
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](0): get wdev_op_lock.
WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0
WiFi@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 0 (ra0)
WiFi@C08L3,UpdateBeaconHandler() 1915: Band0 BcnInitedRnd = 34
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](0): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
WiFi@C08L2,mbss_virtual_if_open() 134: ===> ra4
WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
WiFi@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 4
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](4): get wdev_op_lock.
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId4 = ee:75:0c:4b:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[4]=9, bw_grp=16 omac=17
WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=4
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](4): release wdev_op_lock.
WiFi@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=0 RadioOn
mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
WiFi@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C00L1,ApAutoChannelAtBootUp() 514: not A band
WiFi@C08L1,ap_run_at_boot() 640: ACS is disable !!
WiFi@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:4, CfgMode:0
WiFi@C15L2,APPMFInit() 133: [PMF] apidx=4, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(4)
WiFi@C01L3,wifi_sys_linkup() 1155: wdev idx = 4
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](4): get wdev_op_lock.
WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=4
WiFi@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 11 (ra4)
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](4): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
WiFi@C08L2,mbss_virtual_if_open() 134: ===> ra5
WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
WiFi@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 5
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](5): get wdev_op_lock.
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId5 = ee:75:0c:5b:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[5]=10, bw_grp=16 omac=18
WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=5
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](5): release wdev_op_lock.
WiFi@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=0 RadioOn
mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
WiFi@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
WiFi@C00L1,ApAutoChannelAtBootUp() 514: not A band
WiFi@C08L1,ap_run_at_boot() 640: ACS is disable !!
WiFi@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:5, CfgMode:0
WiFi@C15L2,APPMFInit() 133: [PMF] apidx=5, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(5)
WiFi@C01L3,wifi_sys_linkup() 1155: wdev idx = 5
WiFi@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](5): get wdev_op_lock.
WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=5
WiFi@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 12 (ra5)
WiFi@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](5): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
Set_Map_Proc current MAP MODE is 3
Set_MapR2_Proc: MAP R2 is enabled
Set_Bh_Bss_Proc ra0 bandIdx = 0 ,DevOwnRole 0x20
Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20
Set_Fh_Bss_Proc ra4 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Bss_Proc ra4 bandIdx = 0 ,DevOwnRole 0x44
Set_Fh_Bss_Proc ra5 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Bss_Proc ra5 bandIdx = 0 ,DevOwnRole 0x48
Set_Fh_Bss_Proc ra6 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Sta_Proc apcli0 wdev->MAPCfg.DevOwnRole 0x80
[48.330][cmm] 230 - ERROR: Get map shared buffer error.
[48.330][cmm] 1145 - ERROR: Failed to attach map shared memory buffer.
[48.330][cmm] 14094 - ERROR: There are no APDevices saved in map shared memory.
[48.330][cmm] 17000 - ERROR: Can not find Controller
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
7906@C00L3,BuildChannelList() 518: BandIdx = 0, PhyMode = 78, ChListNum = 11:
7906@C23L1,DfsBuildChannelList() 3426: [RDM]: wdev is not 5G.
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=1, hobj is not ready!
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=7, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=7, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=2, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=3, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=6, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=14, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
7906@C12L1,Set_VhtBw_Proc() 9718: (error Channel = 7)
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
set_vow_airtime_fairness_en: set 0.
set_vow_dwrr_max_wait_time: set 1.
SetPercentageCtrl: ucBandIdx = 0
SetPercentageCtrl: TxPowerPercentEn = 1
SetPowerDropCtrl: ucPowerDrop = 100
sync for : ra0
sync for : ra4
sync for : ra5
Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
7906@C12L3,Set_DtimPeriod_Proc() 16113: (DtimPeriod=1)
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
BcnCheck start after 3400 ms (ra0)
device ra5 entered promiscuous mode
br0: port 4(ra5) entered forwarding state
br0: port 4(ra5) entered forwarding state
device ra4 entered promiscuous mode
br0: port 5(ra4) entered forwarding state
br0: port 5(ra4) entered forwarding state
can't add ra3 to bridge br0: Invalid argument
can't add ra2 to bridge br0: Invalid argument
can't add ra1 to bridge br0: Invalid argument
device ra0 entered promiscuous mode
br0: port 6(ra0) entered forwarding state
br0: port 6(ra0) entered forwarding state
device apcli0 entered promiscuous mode
7906@C08L3,ap_mlme_deauth_req_action() 243: ---> wcid = 32767
7906@C15L2,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 0
7906@C03L2,ExtEventBeaconLostHandler() 169: FW EVENT (ec:75:0c:3b:00:68), Reason 0x10
7906@C03L1,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!!
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](0): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=0
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](0): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 0
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](0): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=0
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock.
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 0
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](0): get wdev_op_lock.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=7, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=7, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId0 = ec:75:0c:3b:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](0): release wdev_op_lock.
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 0
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](0): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 0 (ra0)
7906@C08L2,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](0): release wdev_op_lock.
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
7906@C08L3,ap_mlme_deauth_req_action() 243: ---> wcid = 32767
7906@C15L2,APPMFInit() 133: [PMF] apidx=4, MFPC=0, MFPR=0, SHA256=0
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 4
7906@C03L2,ExtEventBeaconLostHandler() 169: FW EVENT (ee:75:0c:4b:00:68), Reason 0x10
7906@C03L1,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!!
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](4): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=4
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](4): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 4
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](4): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=4
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](4): release wdev_op_lock.
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 4
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](4): get wdev_op_lock.
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId4 = ee:75:0c:4b:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[4]=9, bw_grp=16 omac=17
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=4
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](4): release wdev_op_lock.
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 4
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](4): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=4
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 11 (ra4)
7906@C08L2,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](4): release wdev_op_lock.
restart_ap, mbss_idx:4, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
7906@C08L3,ap_mlme_deauth_req_action() 243: ---> wcid = 32767
7906@C15L2,APPMFInit() 133: [PMF] apidx=5, MFPC=0, MFPR=0, SHA256=0
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 5
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](5): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=5
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](5): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 5
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](5): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=5
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](5): release wdev_op_lock.
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 5
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](5): get wdev_op_lock.
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId5 = ee:75:0c:5b:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band0 group_idx[5]=10, bw_grp=16 omac=18
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=5
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](5): release wdev_op_lock.
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 5
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](5): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=5
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 12 (ra5)
7906@C08L2,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](5): release wdev_op_lock.
restart_ap, mbss_idx:5, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
7906@C09L1,SetApCliEnableByWdev() 22330: interface is not up, please do ifconfig apcli0 up first
WLAN-Start wlNetlinkTool
Waiting for Wireless Events from interfaces...
swWlanChkAhbErr: netlink to do
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 60
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 40
SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 20
SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1
SetThermalProtectEnable(): trigger_temp: 119, restore_temp: 114, recheck_time: 1000
7906@C08L2,mbss_virtual_if_open() 134: ===> rai0
7906@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
7906@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 7
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](7): get wdev_op_lock.
7906@C00L3,BuildChannelList() 518: BandIdx = 1, PhyMode = 177, ChListNum = 25:
7906@C23L3,DfsBuildChannelList() 3471: Done
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=0
7906@C23L3,RadarStateCheck() 284: RD_NORMAL_MODE
phy_freq_adjust : no prim_ch value for adjust!
7906@C23L1,operate_loader_phy() 395: phy_freq_adjust failed!
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId7 = ec:75:0c:3b:00:6a
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band1 group_idx[7]=4, bw_grp=16 omac=0
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=7
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](7): release wdev_op_lock.
7906@C23L1,HcGetBandByChannel() 1056: No hdev parking on channel:0, just return a default band_idx 0!
sh7906@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=0 RadioOn
: /usr/mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
sc7906@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
ri7906@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
pt/7906@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
7906@C23L2,AutoChSelBuildChannelListFor56G() 2763: ChListNum56G = 25
usbho7906@C08L1,UpdateBeaconHandler() 1882: wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x21c/0x4d4 [mt7916_ap])!!
st7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
_7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=36, ctrl_ch2=0, cent_ch=36 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
load.sh: not found
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=36, ctrl_ch2=0, cent_ch=36, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=40, ctrl_ch2=0, cent_ch=40 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=40, ctrl_ch2=0, cent_ch=40, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=44, ctrl_ch2=0, cent_ch=44, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=48 DBDCIdx=1, ChBand=1, BW=0, TXStream=3, RXStream=3, scan(1)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=48, RxPath=7, BandIdx=1, ChBand=1, BW=0,TXStream=3, RXStream=7, scan(1)
BcnCheck start after 900 ms (ra0)
7906@C08L1,UpdateBeaconHandler() 1882: wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2f8/0x4d4 [mt7916_ap])!!
7906@C23L3,SelectClearChannelBusyTime() 1864: ====================================================================
7906@C23L3,SelectClearChannelBusyTime() 1870: Channel 36 : Busy Time = 2464, Skip Channel = FALSE, BwCap = TRUE
7906@C23L3,SelectClearChannelBusyTime() 1870: Channel 40 : Busy Time = 1618, Skip Channel = FALSE, BwCap = TRUE
7906@C23L3,SelectClearChannelBusyTime() 1870: Channel 44 : Busy Time = 659, Skip Channel = FALSE, BwCap = TRUE
7906@C23L3,SelectClearChannelBusyTime() 1870: Channel 48 : Busy Time = 367, Skip Channel = FALSE, BwCap = TRUE
7906@C23L3,SelectClearChannelBusyTime() 1873: ====================================================================
7906@C23L3,SelectClearChannelBusyTime() 2143: Rule 3 Channel Busy time value : Select Primary Channel 48
7906@C23L3,SelectClearChannelBusyTime() 2145: Rule 3 Channel Busy time value : Min Channel Busy = 367
7906@C23L3,SelectClearChannelBusyTime() 2150: Rule 3 Channel Busy time value : BW = 20
7906@C23L3,SelectClearChannelBusyTime() 2189: [SelectClearChannelBusyTime] - band1 END
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=0
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(0) band(0) band_bw(0), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsBuildChannelList() 3471: Done
7906@C23L3,zero_wait_dfs_switch_ch() 823: outband ch 0, ch_stat 0
7906@C23L3,zero_wait_dfs_switch_ch() 830: bDedicatedZeroWaitDefault == 0
7906@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:7, CfgMode:78
7906@C15L2,APPMFInit() 133: [PMF] apidx=7, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(7)
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 7
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](7): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=7
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 0 (rai0)
7906@C08L3,UpdateBeaconHandler() 1915: Band1 BcnInitedRnd = 80
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](7): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
7906@C08L2,mbss_virtual_if_open() 134: ===> rai4
7906@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
7906@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 11
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](11): get wdev_op_lock.
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=3
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId11 = ee:75:0c:bb:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band1 group_idx[11]=25, bw_grp=16 omac=17
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=11
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](11): release wdev_op_lock.
7906@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=1 RadioOn
mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
7906@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
7906@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
7906@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
7906@C00L1,ApAutoChannelAtBootUp() 508: zero-wait DFS is not enabled
7906@C08L1,ap_run_at_boot() 640: ACS is disable !!
7906@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:11, CfgMode:78
7906@C15L2,APPMFInit() 133: [PMF] apidx=11, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(11)
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 11
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](11): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=11
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 11 (rai4)
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](11): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
7906@C08L2,mbss_virtual_if_open() 134: ===> rai5
7906@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
7906@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 12
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](12): get wdev_op_lock.
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=3
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId12 = ee:75:0c:cb:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band1 group_idx[12]=26, bw_grp=16 omac=18
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=12
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](12): release wdev_op_lock.
7906@C02L2,AsicRadioOnOffCtrl() 2211: DbdcIdx=1 RadioOn
mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok
7906@C00L2,ApAutoChannelAtBootUp() 341: ----------------->
7906@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
7906@C03L1,MtCmdSetMacTxRx() 10273: (ret = 0)
7906@C00L1,ApAutoChannelAtBootUp() 508: zero-wait DFS is not enabled
7906@C08L1,ap_run_at_boot() 640: ACS is disable !!
7906@C08L2,APStartUpForMbss() 994: ===>(caller:ap_inf_open+0x184/0x558 [mt7916_ap]), mbss_idx:12, CfgMode:78
7906@C15L2,APPMFInit() 133: [PMF] apidx=12, MFPC=0, MFPR=0, SHA256=0
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C08L2,ap_link_up() 7177: (caller:APStartUpForMbss+0x4b8/0x7a0 [mt7916_ap]), wdev(12)
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 12
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](12): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=12
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 12 (rai5)
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](12): release wdev_op_lock.
PrintSrCmd:
u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
PrintSrCmd:
u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
PrintSrCmd:
u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
Set_Map_Proc current MAP MODE is 3
Set_MapR2_Proc MAP R2 is already enabled
Set_Bh_Bss_Proc rai0 bandIdx = 1 ,DevOwnRole 0x20
Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x20
Set_Fh_Bss_Proc rai4 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Bss_Proc rai4 bandIdx = 1 ,DevOwnRole 0x44
Set_Fh_Bss_Proc rai5 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Bss_Proc rai5 bandIdx = 1 ,DevOwnRole 0x48
Set_Fh_Bss_Proc rai6 wdev->MAPCfg.DevOwnRole 0x0
Set_Bh_Sta_Proc apclii0 wdev->MAPCfg.DevOwnRole 0x80
[53.056][cmm] 230 - ERROR: Get map shared buffer error.
[53.057][cmm] 1145 - ERROR: Failed to attach map shared memory buffer.
[53.057][cmm] 14094 - ERROR: There are no APDevices saved in map shared memory.
[53.057][cmm] 17000 - ERROR: Can not find Controller
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=3
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
7906@C00L3,BuildChannelList() 518: BandIdx = 1, PhyMode = 177, ChListNum = 25:
7906@C23L3,DfsBuildChannelList() 3471: Done
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=8, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=9, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=10, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=13, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C02L1,hc_radio_res_request() 1386: wdev=15, hobj is not ready!
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
set_vow_airtime_fairness_en: set 0.
set_vow_dwrr_max_wait_time: set 1.
SetPercentageCtrl: ucBandIdx = 1
SetPercentageCtrl: TxPowerPercentEn = 1
SetPowerDropCtrl: ucPowerDrop = 100
sync for : ra0
sync for : ra4
sync for : ra5
sync for : rai0
sync for : rai4
sync for : rai5
Set_FragThreshold_Proc::set wdev7 FragThreshold=2346)
7906@C12L3,Set_DtimPeriod_Proc() 16113: (DtimPeriod=1)
WiFi@C00L2,dump_ht_cap() 29: Caller: SetCommonHT+0xb4/0x148 [mt7916_ap]
device rai5 entered promiscuous mode
br0: port 8(rai5) entered forwarding state
br0: port 8(rai5) entered forwarding state
device rai4 entered promiscuous mode
br0: port 9(rai4) entered forwarding state
br0: port 9(rai4) entered forwarding state
can't add rai3 to bridge br0: Invalid argument
can't add rai2 to bridge br0: Invalid argument
can't add rai1 to bridge br0: Invalid argument
device rai0 entered promiscuous mode
br0: port 10(rai0) entered forwarding state
br0: port 10(rai0) entered forwarding state
device apclii0 entered promiscuous mode
7906@C08L3,ap_mlme_deauth_req_action() 243: ---> wcid = 32767
7906@C15L2,APPMFInit() 133: [PMF] apidx=7, MFPC=0, MFPR=0, SHA256=0
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 7
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](7): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=7
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](7): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 7
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](7): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=7
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](7): release wdev_op_lock.
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 7
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](7): get wdev_op_lock.
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=3
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C08L1,UpdateBeaconHandler() 1882: wdev(7) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xb0/0xb8 [mt7916_ap])!!
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId7 = ec:75:0c:3b:00:6a
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band1 group_idx[7]=4, bw_grp=16 omac=0
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=7
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](7): release wdev_op_lock.
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 7
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](7): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=7
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 0 (rai0)
7906@C08L2,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](7): release wdev_op_lock.
7906@C08L3,ap_mlme_deauth_req_action() 243: ---> wcid = 32767
7906@C15L2,APPMFInit() 133: [PMF] apidx=11, MFPC=0, MFPR=0, SHA256=0
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 11
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](11): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=11
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](11): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 11
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](11): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=11
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](11): release wdev_op_lock.
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 11
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](11): get wdev_op_lock.
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=3
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId11 = ee:75:0c:bb:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band1 group_idx[11]=25, bw_grp=16 omac=17
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=11
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](11): release wdev_op_lock.
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 11
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](11): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=11
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 11 (rai4)
7906@C08L2,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](11): release wdev_op_lock.
7906@C08L3,ap_mlme_deauth_req_action() 243: ---> wcid = 32767
7906@C15L2,APPMFInit() 133: [PMF] apidx=12, MFPC=0, MFPR=0, SHA256=0
7906@C01L3,wifi_sys_linkdown() 1279: wdev idx = 12
7906@C03L2,ExtEventBeaconLostHandler() 169: FW EVENT (ee:75:0c:cb:00:68), Reason 0x10
7906@C03L1,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!!
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkdown+0x60/0x370 [mt7916_ap](12): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_down() 123: wdev_idx=12
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_down+0xe8/0x170 [mt7916_ap](12): release wdev_op_lock.
WiFi@C01L3,wifi_sys_close() 934: wdev idx = 12
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_close+0x1b0/0x29c [mt7916_ap](12): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_close() 41: wdev_idx=12
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_close+0x84/0xc4 [mt7916_ap](12): release wdev_op_lock.
WiFi@C01L3,wifi_sys_open() 845: wdev idx = 12
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_open+0xe4/0x3ec [mt7916_ap](12): get wdev_op_lock.
7906@C23L3,RadarStateCheck() 245: Bw160 Zero Wait State: 0, phy_bw=3, band_bw[band_idx]=3
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,RadarStateCheck() 265: RD_SILENCE_MODE
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsCacNormalStart() 3338: [RDM] CAC 65 seconds start . Disable MAC TX
7906@C23L3,DfsSwitchCheck() 3629: DFS ByPass TX calibration.
7906@C00L1,mt7916_apply_dpd_flatness_data() 563: eeprom 0x19a bit 0 is 0, do runtime cal
7906@C03L3,MtCmdChannelSwitch() 2529: ctrl_chl=48, ctrl_ch2=0, cent_ch=50 DBDCIdx=1, ChBand=1, BW=3, TXStream=3, RXStream=3, scan(0)
7906@C03L3,MtCmdSetTxRxPath() 2780: ctrl_chl=48, ctrl_ch2=0, cent_ch=50, RxPath=7, BandIdx=1, ChBand=1, BW=3,TXStream=3, RXStream=7, scan(0)
7906@C23L3,DfsGetSysParameters() 1264: Get before pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
7906@C23L3,DfsGetSysParameters() 1310: Get after pDfsParam->PrimCh(48) band(1) band_bw(3), outbw(0)
WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xc0/0x108 [mt7916_ap]
wdev_attr_update(): wdevId12 = ee:75:0c:cb:00:68
WiFi@C12L1,wifi_sys_open() 896: wifi_sys_open():band1 group_idx[12]=26, bw_grp=16 omac=18
7906@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=12
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_open+0x84/0xc4 [mt7916_ap](12): release wdev_op_lock.
7906@C01L3,wifi_sys_linkup() 1155: wdev idx = 12
7906@C08L3,wifi_sys_op_lock() 792: wifi_sys_linkup+0x88/0x468 [mt7916_ap](12): get wdev_op_lock.
7906@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=12
7906@C08L3,UpdateBeaconHandler() 1902: BCN_UPDATE_INIT, OmacIdx = 12 (rai5)
7906@C08L2,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1
7906@C08L3,wifi_sys_op_unlock() 813: hw_ctrl_flow_v2_link_up+0xe8/0x17c [mt7916_ap](12): release wdev_op_lock.
[55.072][cmm] 9189 - ERROR: wlNetlinkTool is already there.
7906@C09L1,SetApCliEnableByWdev() 22330: interface is not up, please do ifconfig apclii0 up first
sh: can't open '/etc/smp.sh'
SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 0, duty: 100
SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 1, duty: 60
SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 2, duty: 40
SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 3, duty: 20
SetThermalProtectEnable(): band_idx: 1, protection_type: 1, trigger_type: 1
SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 1000
[55.194][cmm] 139 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra1/brport/bridge/ifindex
[55.195][cmm] 139 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai1/brport/bridge/ifindex
[55.197][cmm] 139 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra2/brport/bridge/ifindex
[55.199][cmm] 139 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra3/brport/bridge/ifindex
[55.201][cmm] 139 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai2/brport/bridge/ifindex
[55.202][cmm] 139 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai3/brport/bridge/ifindex
[55.223][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
rm: can't remove '/var/tmp/os_print/tpApp/2_debug': No such file or directory
[55.413][cmm] 794: Skip create dropbear RSA key here
[55.414][cmm] 822: Skip create dropbear DSS key here
[2174] Apr 26 00:00:54 Running in background
[Apr 26 00:00:54] radvd: poll error: Interrupted system call
[55.568][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
[55.570][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
[Apr 26 00:00:54] radvd: poll error: Interrupted system call
[55.842][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
sendto: No such file or directory
line(593) Msg.type(2030) pid(851) errno(2) ret(-1)
[56.010][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
iptables: Bad rule (does a matching rule exist in that chain?).
[56.042][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
iptables: Bad rule (does a matching rule exist in that chain?).
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP MPPE Compression module registered
ioctl set error: Inappropriate ioctl for device
Erase from 0x180000 with 0x20000 bytes TP board sdk_flash_erase addr 00180000, len 20000
Write flash to 0x180000, len is 0x20000 TP board sdk_flash_write to 00180000, len 20000
Erase from 0x180000 with 0x20000 bytes TP board sdk_flash_erase addr 00180000, len 20000
Write flash to 0x180000, len is 0x20000 TP board sdk_flash_write to 00180000, len 20000
[56.456][cmm] 581 - EPassword:
RROR: Gpon sn str:54504C47vendor: 0x54504c47
0C3B0068
[2024-4-26 Fri 00:00:55.472431][TP_omciMibReset][6417]:set OMCI machine in TP_omciMibReset
[56.456][cmm] 582 - ERROR: Gpon pwd str:
[56.457][cmm] 583 - ERROR: Gpon sn type:1
[56.457][cmm] 584 - ERROR: Gpon pwd type:0
api_set_sn_auth_info(545): passwd:();
api_set_sn_auth_info(618): snIUint32[0] = 0x54504c47, snIUint32[1] = 0x0c3b0068,
api_renegotiate(742):api_renegotiate after MIB reset
api_set_ctc_auth_info(630): -- not implemented, to do here! --
[56.479][cmm] 1080 - ERROR: Init loid tplink passwd tplink
[56.507][cmm] 133 - ERROR: Cann't open file: /var/run/zebra.pid.
[56.566][cmm] 133 - ERROR: Cann't open file: /var/run/ripd.pid.
[56.566][cmm] 133 - ERROR: Cann't open file: /var/run/ripngd.pid.
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
nf_conntrack_rtsp v0.7 loading
nf_nat_rtsp v0.7 loading
k_domain: tplinkmodem.net
ip6tables: Too many links.
[56.909][httpd] 1028 - ERROR: u_domain: tplinkmodem.net
iptables: Bad rule (does a matching rule exist in that chain?).
ip6tables: Bad rule (does a matching rule exist in that chain?).
VoIPBasic_Common SIPProtocol is SIP
prevSipStatus: 0, curSipStatus: 0
voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0
[2024-4-26 Fri 00:00:56.533197][main][1188]:Current State OMCI_STATE_RUN, recv CONDITION_RE_CONFIG change to OMCI_STATE_IDLE!
[2024-4-26 Fri 00:00:56.547082][omciInitCapability][539] omciInitCapability In
[2024-4-26 Fri 00:00:56.797111]pPortList(48,248,47,47,47,47,32)
[2024-4-26 Fri 00:00:56.803786]pPort(48)
sh: can't cr
[2024-4-26 Fri 00:00:56.808646]pPort(248)
eate
[2024-4-26 Fri 00:00:56.812961]pPort(47)
/proc/tplink
[2024-4-26 Fri 00:00:56.817995]pPort(47)
/pp
[2024-4-26 Fri 00:00:56.822225]pPort(47)
e_debug: nonexi
[2024-4-26 Fri 00:00:56.827352]pPort(47)
sten
[2024-4-26 Fri 00:00:56.831618]pPort(32)
t directory
[2024-4-26 Fri 00:00:56.844044][omciInitCapability][635] getNext Dev2 currGponAuthObj SN(54504C470C3B0068),SNtype(1)
[ rsl_initIqosObj ] 1244: 0#0,0,0,0
[2024-4-26 Fri 00:00:56.872243][omciInitCapability][682] currOmciCapObj.vendorId IS (TPLG)
[57.869]
[2024-4-26 Fri 00:00:56.881121]read_flash:read In - 8 bytes in 77463552
[cmm] 3758 -
2024-4-26 Fri 00:00:56.889983]read_flash:read In - 8 bytes in 77463552
mERROR: voiceserice exist. skip create instance.
[2024-4-26 Fri 00:00:56.904905]read_flash:read In - 512 bytes in 2752512
[2024-4-26 Fri 00:00:56.922337]read_flash:read In - 512 bytes in 38797312
svchost_get_event_val: get param fail [0]
[2024-4-26 Fri 00:00:56.943988]do not config omci intance by file info
ctromfile.cfg
sh: /bin/mv: not found
Couldn't open image file: /tmp/tc_store_romfile.conf!
Unlocking reservearea ...
Could not open mtd device: reservearea
Couldn't open image file: /tmp/tc_store_romfile.conf!
killall: minidlnad: no process killed
killall: vsftpd: no process killed
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
ip6tables: Bad rule (does a matching rule exist in that chain?).
[2024/04/26 00:00:59] getifaddr.c:334: runtime_vars.ifaces[0]=br0
[60.291][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
[2024-4-26 Fri 00:00:59.310688][main][1144]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT!
set olt type: 0
[60.326][cmm] 1805 - ERROR: The lengh(ponTime:Connection Start
working_mode: 1
0) of phone number() is less than 3 or lager than 32.
[60
[2024-4-26 Fri 00:00:59.342815][main][1172]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN!
.327][cmm] 1653 - ERROR: ret=9007
[60.327][cmm] 707 - ERROR: ret=9007
[60.329][cmm] 1805 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32.
[60.329][cmm] 1653 - ERROR: ret=9007
[60.330][cmm] 707 - ERROR: ret=9007
[60.331][cmm] 1385 - WARN: Not found DHCPv4.Client object referenced Device.IP.Interface.2.
[60.352][httpd] 529 - ERROR: Unknown page: /main/advanceLte.htm, skip it
[60.352][httpd] 529 - ERROR: Unknown page: /main/sfpWan.htm, skip it
[60.352][httpd] 529 - ERROR: Unknown page: /main/sfpWanEdit.htm, skip it
++++++++++we are going to init cloud+++++++++++++++++
[60.404][cmm] 1805Set_MapTS_Proc MAP TS is already disabled
- ERROR: The lengh(0) of phone number() is less than 3 or lageSet_MapTS_Proc MAP TS is already disabled
r than 32.
[60.405][cmm] 1653 - ERROR: ret=9007
[60.405][cmm] 707 - ERROR: ret=9007
[60.406][cmm] 4266 - ERROR: mesh enable is 1, ts enable is 0
[60.406][cmm] 3615 - ERROR: traffic separation is disabled
mmmInit():Total mem size=51364, addr=0x0x420008.
*************************************************************
*************************MMM TABLE DUMP**********************
-------------------------------------------------------------
poolhead(40) poolnum dynamictimes chainhead poolend
-------------------------------------------------------------
0x420008 8 0 (nil) 0x42c8ac
-------------------------------------------------------------
index poolhead(20) size blocks free usage
-------------------------------------------------------------
1 0x420030 32 256 256 0
2 0x422448 64 128 128 0
3 0x424660 128 64 64 0
4 0x426778 256 32 32 0
5 0x428810 512 8 8 0
6 0x429848 1024 4 4 0
7 0x42a870 2048 2 2 0
8 0x42b890 4096 1 1 0
-------------------------------------------------------------
index chainnode(16) magic length prev next
-------------------------------------------------------------
(nil)
*************************************************************
1714118459497|2728|4|cloud.c:91:main| - cloud-sdk version: 1.3.9-rc03, build_time:20211227_172322
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
Interface doesn't accept private ioctl...
set (8BE2): Invalid argument
**************************************************
********************config dump*******************
--------------------------------------------------
sef domain : n-deventry-gw.tplinkcloud.com
sef port : 443
cloud svr default port : 443
default svr : n-devs-gw.tplinkcloud.com
default port : 443
default valid time : 172800
heartbeat interval : 235000
request timeout : 5000
reconnect timewait max : 1024000
reconnect cachedsvr max times : 5
reconnect defaultsvr max times : 5
reconnect random time min : 2000
reconnect random time max : 256000
short connect interval : 259200000
max message number : 1000
max client number : 20
service file : /tmp/cloud_service.cfg
cer file : /etc/cloud/2048_newroot.cer
ssl verify CN :
ssl verify time : 0
**************************************************
[60.714][cmm] 1805 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32.
[60.714][cmm] 1653 - ERROR: ret=9007
[60.715][cmm] 707 - ERROR: ret=9007
[60.725][cmm] 13719 - ERROR: mapController is not exist!
[60.732][cmm] 13719 - ERROR: mapController is not exist!
[60.740][cmm] 13719 - ERROR: mapController is not exist!
[60.747][cmm] 13719 - ERROR: mapController is not exist!
[60.753][cmm] 13719 - ERROR: mapController is not exist!
[60.760][cmm] 13719 - ERROR: mapController is not exist!
[60.766][cmm] 13719 - ERROR: mapController is not exist!
[60.773][cmm] 13719 - ERROR: mapController is not exist!
[60.781][cmm] 13719 - ERROR: mapController is not exist!
[60.788][cmm] 13719 - ERROR: mapController is not exist!
[60.798][cmm] 13719 - ERROR: mapController is not exist!
[60.808][cmm] 13719 - ERROR: mapController is not exist!
ip6tables: Bad rule (does a matching rule exist in that chain?).
[60.848][cmm] 13719 - ERROR: mapController is not exist!
[60.849][cmm] 1805 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32.
[60.849][cmm] 1653 - ERROR: ret=9007
[60.849][cmm] 707 - ERROR: ret=9007
[60.851][cmm] 1805 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32.
[60.851][cmm] 1653 - ERROR: ret=9007
[60.852][cmm] 707 - ERROR: ret=9007
[60.853][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.853][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.853][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.854][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.854][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.854][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.854][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.855][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.855][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.855][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.855][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.856][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.856][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.856][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.856][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.857][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.857][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.857][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.857][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.858][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.858][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.858][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.858][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.859][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.859][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.859][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.859][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.860][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.860][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.861][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.861][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.862][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.863][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.863][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.864][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.864][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.865][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.865][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.865][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.866][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.866][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.866][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.867][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.867][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.868][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.868][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.870][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[60.870][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.204][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.204][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.205][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.205][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.205][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.205][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.206][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.206][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.206][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.206][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.207][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.207][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.207][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.207][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.208][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.208][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.208][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.208][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.209][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.209][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.209][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
Sorry, rule does not exist.
[61.209][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.210][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.210][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.211][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.211][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.212][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.212][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.213][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.213][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.214][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.214][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.214][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.215][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.215][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.216][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.216][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.216][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.217][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.217][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.218][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.218][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.218][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.219][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.219][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.219][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.220][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.220][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.221][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.221][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
Sorry, rule does not exist.
[61.555][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
[61.555][cmm] 1387 - ERvoip modules loaded, timer number 3ROR: Underflow, current is 0, changed is -1
[61.556][cmm] 1387 - ERROR: Underflow, current is 0, changed is -1
Sorry, rule does not exist.
[61.571][cmm] 1805 - E
fxsGetLine(0)Ret[1]=State[3]
RROR: The lengh(0) of phone number() is less than 3 or lager than 32.
[61.571]fxsSetLine[0]state 0x9 State UNKNOWN !
[cmm] 1653 - ERROR: ret=9007
[61.571][cmm] 707 - ERROR: ret=9007
[61.573][cmm] 1387 - ERROR: --> X_TP_ConnType=LAN X_TP_ServiceType=Unknown
[61.573][cmm] 1387 - br0: port 1(eth0.1) entered disabled state
ERROR: --> X_TP_ConnType=PPP3G X_TP_ServiceType=Unknown
[61.574][cmm] 1387 - ERROR: --> X_TP_ConnTypdevice eth0.1 left promiscuous mode
e=Dbr0: port 1(eth0.1) entered disabled state
HCP4G X_TP_ServiceType=Unknown
[61.574][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP X_TP_ServiceType=Internet
[61.574][cmm] 1805 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32.
[61.575][cmm] 1653 - ERROR: ret=9007
[61.575][cmm] 707 - ERROR: ret=9007
[61.576][httpd] 630 - ERROR: Invalid value!
[61.577][httpd] 529 - ERROR: Unknown page: /main/operateMode.htm, skip it
sh: can't create /proc/tplink/eth_forward: nonexistent directory
Sorry, rule does not exist.
*reg=00002104 value:00ff0000
Sorry, rule does not exist.
*reg=00002204 value:00ff0000
VDSP_GetInstance:292
[GDI] Change log level to (EVA_LOG_ERR).
*reg=00002304 value:00ff0000
*reg=00002404 value:00ff0000
Illegal target name 'ieee1905'.
Ilbr0: port 2(eth0.2) entered disabled state
legal target name 'ieee1905'.
sh: write error: Invalid argument
+++ timer 2 start (tick : 2) +++
device eth0.2 left promiscuous mode
br0: port 2(eth0.2) entered disabled state
br0: port 3(eth0.3) entered disabled state
device eth0.3 left promiscuous mode
br0: port 3(eth0.3) entered disabled state
fxsSetLine[0]state 0x9 State UNKNOWN !
device eth0.4 is not a slave of br0
ath_band_steering_netlink_receive 157 pid = 2879
ath_band_steering_netlink_receive 157 pid = 2879
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
ath_band_steering_netlink_receive 157 pid = 2879
ath_band_steering_netlink_receive 157 pid = 2879
device eth0.1 entered promiscuous mode
br0: port 1(eth0.1) entered forwarding state
br0: port 1(eth0.1) entered forwarding state
device eth0.2 entered promiscuous mode
device eth0.3 entered promiscuous mode
[62.202][SharedLib] 123: Map Shared Memory size: 267968 bytes
[62.203][SharedLib] 85: mac(EE:75:0C:3B:00:69), cfg_file(/var/tmp/map.conf), is_registrar(1), bMapController(1), mapEnable(1), vlan_enable(0)
procName is sigma_dut, keyWord is
[62.214][SharedLib] 123: Map Shared Memory size: 267968 bytes
[62.215][SharedLib] 85: mac(EE:75:0C:3B:00:68), cfg_file(/var/tmp/map.conf), is_registrar(0), bMapController(0), mapEnable(1), vlan_enable(0)
procName is sigma_dut, keyWord is
device eth0.4 is not a slave of br0
device eth0.5 is not a slave of br0
[62.301][cmm] 2334 - WARN: refresh host info entry...
g_tx_ctl = 1
sh: write error: Invalid argument
[62.350][cmm] 14136 - ERROR: AgentOnController not found, update map device fail!!!
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
Starting daemon...
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
sendto: No such file or directory
line(593) Msg.type(9250) pid(851) errno(2) ret(-1)
LoadClientCert: Not using a device certificate for connections
topic[/tpuc/tr369controller], response_topic[/tpuc/EC750C-XX530v-224C077005350]
********************config dump*******************
----------------------status----------------------
processid : 2732
---------------------configure--------------------
loglevel : 3
verify host : n-device-api.tplinkcloud.com
verify port : 0
verify path : /v1/validate
post connect timeout : 20
post transfer timeout : 20
get connect timeout : 20
get transfer timeout : 20
session debug : off
cer file : /etc/cloud_https/2048new.cer
cer type :
**************************************************
agentid is :USP::EC750C3B0068
DM_EXEC_Main start
MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235]
Failed to connect v5 with Lookup error. (15)
HandleMqttError: Disconnect failed. Already disconnected?
[62.610][cmm] 14136 - ERROR: AgentOnController not found, update map device fail!!!
[grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed!
[grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud
[grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed!
[grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud
device lo entered promiscuous mode
[63.014][mapController] 382: Starting map (AL MAC = ee:75:0c:3b:00:69), mapEnable = 1...
[63.039][mapAgent] 378: Starting map (AL MAC = ee:75:0c:3b:00:68), mapEnable = 1...
[63.372][cos] 678 - ERROR: PON linkStatus changed :INIT->0
[63.372][cos] 731 - ERROR: PON linkStatus is not Stable (0)
sh: write error: Invalid argument
[63.881][cmm] 14136 - ERROR: AgentOnController not found, update map device fail!!!
[64.381][cmm] 14136 - ERROR: AgentOnController not found, update map device fail!!!
[64.404][cos] 678 - ERROR: PON linkStatus changed :INIT->0
[64.404][cos] 682 - ERROR: PON linkStatus isStable (1)
[64.412][cmm] 233 - ERROR: exit
[64.412][cmm] 450 - ERROR: exit
updateDevBandWidthMac:index=0,64:1c:67:bf:44:1e
[66.380][cos] 8038: ===============================recv AgentConfig Message========================================
[66.381][cos] 8048: do not support autoconfig in Controller or easymesh disable
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: No chain/target/match by that name.
[67.287][cmm] 2694 - ERROR: [ PID=851 ] write usrconf to nor flash (note: please resure your flash-write necessary)
Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000
Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000
[grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed!
[grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud
[70.330][ntpc] 785 - ERROR: open DNS error
NTP server list:
[Apr 26 00:01:09] radvd: poll error: Interrupted system call
[Apr 26 00:01:09] radvd: poll error: Interrupted system call
MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235]
Failed to connect v5 with Lookup error. (15)
HandleMqttError: Disconnect failed. Already disconnected?
MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235]
Failed to connect v5 with Lookup error. (15)
HandleMqttError: Disconnect failed. Already disconnected?
[94.153][cmm] 2334 - WARN: refresh host info entry...
[grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed!
[grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud
[94.444][Topology] 3614 - ERROR: overrun timeStamp(0)
sleep 90s!
7906@C23L3,DfsCacEndUpdate() 2914: [RDM] CAC end. Enable MAC TX.
[111.840][Platform] 477: Channel Change Receive: ifname: rai0, ch:48, opclass:129
MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235]
Failed to connect v5 with Lookup error. (15)
HandleMqttError: Disconnect failed. Already disconnected?
[123.921][cmm] 492 - WARN: Current dns svr: , dnsv6 svr:
[Apr 26 00:02:02] radvd: poll error: Interrupted system call
[124.079][cmm] 2334 - WARN: refresh host info entry...
[127.930][ntpc] 785 - ERROR: open DNS error
NTP server list:
[Apr 26 00:02:06] radvd: poll error: Interrupted system call
[Apr 26 00:02:07] radvd: poll error: Interrupted system call
```
Assignees
Sirherobrine23 (Matheus Sampaio Queiroga)
Clear assignees
Sirherobrine23 (Matheus Sampaio Queiroga)
No Assignees
Notifications
Due Date
No due date set.
Dependencies
No dependencies set.
Reference: Sirherobrine23/OffTopics#4
Reference in New Issue
Block a user