George Moussalem a23f841289 net: dsa: qca8k: fix led devicename when using external mdio bus ...

The qca8k dsa switch can use either an external or internal mdio bus.
This depends on whether the mdio node is defined under the switch node
itself and, as such, the internal_mdio_mask is populated with its
internal phys. Upon registering the internal mdio bus, the
internal_mdio_bus of the dsa switch is assigned to this bus.
When an external mdio bus is used, it is left unassigned, though its id
is used to create the device names of the leds.
This leads to the leds being named '(efault):00:green:lan' and so on as
the internal_mdio_bus is null. So let's fix this by adding a null check
and use the devicename of the external bus instead when an external bus
is configured.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19004
Signed-off-by: Robert Marko <robimarko@gmail.com>

2025-06-13 12:02:39 +02:00

1.5 KiB

Raw Permalink Blame History

View Raw