Openwrt/openwrt
0
0
Fork 4
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2025-09-12 15:59:40 +00:00
Code Issues Releases Activity
Files
main
openwrt/target/linux/bcm27xx/image/Makefile
Elbert Mai a61ab43fe7 bcm2712: add kmod-r8169 and kmod-usb-net-rtl8152 
Boards such as [1] and [2] add an extra Ethernet port to Raspberry Pi (CM)5.
These typically use Realtek PCIe or USB Ethernet NICs. Include kmod-r8169 and
kmod-usb-net-rtl8152 by default to make it easy to configure LAN/WAN ports
with these parts on Raspberry Pi 5.

Because CM5 can fit in the same carrier boards as CM4, also ensure that both
devices have the same Ethernet NIC kmods.

[1]: https://www.waveshare.com/wiki/CM5-DUAL-ETH-MINI
[2]: https://www.waveshare.com/wiki/PCIe_TO_Gigabit_ETH_Board_(C)

Signed-off-by: Elbert Mai <code@elbertmai.com>
Link: https://github.com/openwrt/openwrt/pull/19384
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-09-09 00:07:18 +02:00

238 lines
7.2 KiB
Makefile
Raw Permalink Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2012-2019 OpenWrt.org
# Copyright (C) 2016-2017 LEDE project
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
FAT32_BLOCK_SIZE=1024
FAT32_BLOCKS=$(shell echo $$(($(CONFIG_TARGET_KERNEL_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
define Build/Compile
$(CP) $(LINUX_DIR)/COPYING $(KDIR)/COPYING.linux
endef
### Image scripts ###
define Build/boot-common
echo $(IMG_PART_SIGNATURE) > $@-partuuid.txt
sed \
-e 's#@ROOT@#PARTUUID=$(IMG_PART_SIGNATURE)-02#g' \
cmdline.txt > $@-cmdline.txt
rm -f $@.boot
mkfs.fat -n boot -C $@.boot $(FAT32_BLOCKS)
mcopy -i $@.boot $(KDIR)/COPYING.linux ::
mcopy -i $@.boot $(KDIR)/LICENCE.broadcom ::
mcopy -i $@.boot $@-cmdline.txt ::cmdline.txt
mcopy -i $@.boot config.txt ::
mcopy -i $@.boot distroconfig.txt ::
mcopy -i $@.boot $@-partuuid.txt ::partuuid.txt
mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_IMG)
$(foreach dts,$(shell echo $(DEVICE_DTS)),mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::;)
mmd -i $@.boot ::/overlays
mcopy -i $@.boot $(DTS_DIR)/overlays/*.dtbo ::/overlays/
mcopy -i $@.boot $(DTS_DIR)/overlays/README ::/overlays/
endef
define Build/boot-2708
mcopy -i $@.boot $(KDIR)/bootcode.bin ::
mcopy -i $@.boot $(KDIR)/start.elf ::
mcopy -i $@.boot $(KDIR)/start_cd.elf ::
mcopy -i $@.boot $(KDIR)/start_x.elf ::
mcopy -i $@.boot $(KDIR)/fixup.dat ::
mcopy -i $@.boot $(KDIR)/fixup_cd.dat ::
mcopy -i $@.boot $(KDIR)/fixup_x.dat ::
endef
define Build/boot-2711
mcopy -i $@.boot $(KDIR)/start4.elf ::
mcopy -i $@.boot $(KDIR)/start4cd.elf ::
mcopy -i $@.boot $(KDIR)/start4x.elf ::
mcopy -i $@.boot $(KDIR)/fixup4.dat ::
mcopy -i $@.boot $(KDIR)/fixup4cd.dat ::
mcopy -i $@.boot $(KDIR)/fixup4x.dat ::
endef
define Build/sdcard-img
SIGNATURE="$(IMG_PART_SIGNATURE)" \
./gen_rpi_sdcard_img.sh $@ $@.boot $(IMAGE_ROOTFS) \
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
endef
### Devices ###
define Device/Default
DEVICE_VENDOR := Raspberry Pi
KERNEL := kernel-bin
KERNEL_IMG := kernel.img
IMAGES := factory.img.gz sysupgrade.img.gz
IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | boot-2708 | sdcard-img | gzip
endef
define Device/rpi
DEVICE_MODEL := A/A+/B/B+/CM/Zero/ZeroW
DEVICE_DTS := \
broadcom/bcm2708-rpi-b broadcom/bcm2708-rpi-b-rev1 broadcom/bcm2708-rpi-b-plus \
broadcom/bcm2708-rpi-cm \
broadcom/bcm2708-rpi-zero broadcom/bcm2708-rpi-zero-w
SUPPORTED_DEVICES := \
rpi-a rpi-a-plus \
rpi-b rpi-b-plus \
rpi-cm \
rpi-zero rpi-zero-w \
raspberrypi,model-a raspberrypi,model-a-plus \
raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,model-b-rev2 \
raspberrypi,compute-module raspberrypi,compute-module-1 \
raspberrypi,model-zero raspberrypi,model-zero-w
DEVICE_PACKAGES := \
cypress-firmware-43430-sdio \
brcmfmac-nvram-43430-sdio \
kmod-brcmfmac wpad-basic-mbedtls \
kmod-i2c-bcm2835 kmod-spi-bcm2835 \
kmod-spi-bcm2835-aux
endef
ifeq ($(SUBTARGET),bcm2708)
TARGET_DEVICES += rpi
endif
define Device/rpi-2
DEVICE_MODEL := 2B/2B 1.2
DEVICE_VARIANT := (32bit)
DEVICE_ALT0_VENDOR := Raspberry Pi
DEVICE_ALT0_MODEL := 3A+/3B/3B+/CM3/Zero2/Zero2W
DEVICE_ALT0_VARIANT := (32bit)
DEVICE_ALT1_VENDOR := Raspberry Pi
DEVICE_ALT1_MODEL := 4B/400/CM4
DEVICE_ALT1_VARIANT := (32bit)
DEVICE_DTS := \
broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b \
broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \
broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400 \
broadcom/bcm2710-rpi-cm3 broadcom/bcm2711-rpi-cm4 \
broadcom/bcm2710-rpi-zero-2 broadcom/bcm2710-rpi-zero-2-w
SUPPORTED_DEVICES := \
rpi-2-b \
rpi-3-a-plus \
rpi-3-b rpi-3-b-plus \
rpi-4-b rpi-400 \
rpi-cm \
rpi-zero-2 rpi-zero-2-w \
raspberrypi,2-model-b raspberrypi,2-model-b-rev2 \
raspberrypi,3-model-a-plus \
raspberrypi,3-model-b raspberrypi,3-model-b-plus \
raspberrypi,3-compute-module raspberrypi,compute-module-3 \
raspberrypi,400 raspberrypi,4-compute-module raspberrypi,4-model-b \
raspberrypi,model-zero-2 raspberrypi,model-zero-2-w
DEVICE_PACKAGES := \
cypress-firmware-43430-sdio \
brcmfmac-nvram-43430-sdio \
cypress-firmware-43455-sdio \
brcmfmac-nvram-43455-sdio \
kmod-brcmfmac wpad-basic-mbedtls \
kmod-i2c-bcm2835 kmod-spi-bcm2835 \
kmod-spi-bcm2835-aux
IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | boot-2711 | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | boot-2708 | boot-2711 | sdcard-img | gzip
endef
ifeq ($(SUBTARGET),bcm2709)
TARGET_DEVICES += rpi-2
endif
define Device/rpi-3
DEVICE_MODEL := 3A+/3B/3B+/CM3/Zero2/Zero2W
DEVICE_VARIANT := (64bit)
DEVICE_ALT0_VENDOR := Raspberry Pi
DEVICE_ALT0_MODEL := 2B-1.2
DEVICE_ALT0_VARIANT := (64bit)
KERNEL_IMG := kernel8.img
DEVICE_DTS := \
broadcom/bcm2710-rpi-2-b \
broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \
broadcom/bcm2710-rpi-cm3 \
broadcom/bcm2710-rpi-zero-2 broadcom/bcm2710-rpi-zero-2-w
SUPPORTED_DEVICES := \
rpi-3-a-plus \
rpi-3-b rpi-3-b-plus \
rpi-zero-2 rpi-zero-2-w \
raspberrypi,2-model-b-rev2 \
raspberrypi,3-model-a-plus \
raspberrypi,3-model-b raspberrypi,3-model-b-plus \
raspberrypi,3-compute-module raspberrypi,compute-module-3 \
raspberrypi,model-zero-2 raspberrypi,model-zero-2-w
DEVICE_PACKAGES := \
cypress-firmware-43430-sdio \
brcmfmac-nvram-43430-sdio \
cypress-firmware-43455-sdio \
brcmfmac-nvram-43455-sdio \
kmod-brcmfmac wpad-basic-mbedtls \
kmod-i2c-bcm2835 kmod-spi-bcm2835 \
kmod-spi-bcm2835-aux
endef
ifeq ($(SUBTARGET),bcm2710)
TARGET_DEVICES += rpi-3
endif
define Device/rpi-4
DEVICE_MODEL := 4B/400/CM4
DEVICE_VARIANT := (64bit)
KERNEL_IMG := kernel8.img
DEVICE_DTS := \
broadcom/bcm2711-rpi-400 \
broadcom/bcm2711-rpi-4-b \
broadcom/bcm2711-rpi-cm4
SUPPORTED_DEVICES := \
raspberrypi,400 \
raspberrypi,4-compute-module \
raspberrypi,4-model-b
DEVICE_PACKAGES := \
cypress-firmware-43455-sdio \
brcmfmac-nvram-43455-sdio \
kmod-brcmfmac wpad-basic-mbedtls \
kmod-i2c-bcm2835 kmod-spi-bcm2835 \
kmod-spi-bcm2835-aux \
kmod-i2c-brcmstb \
kmod-usb-net-lan78xx \
kmod-usb-net-rtl8152 \
kmod-r8169
IMAGE/sysupgrade.img.gz := boot-common | boot-2711 | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | boot-2711 | sdcard-img | gzip
endef
ifeq ($(SUBTARGET),bcm2711)
TARGET_DEVICES += rpi-4
endif
define Device/rpi-5
DEVICE_MODEL := 5/500/CM5
KERNEL_IMG := kernel_2712.img
DEVICE_DTS := \
broadcom/bcm2712-rpi-5-b \
broadcom/bcm2712-rpi-cm5-cm4io \
broadcom/bcm2712-rpi-cm5-cm5io \
broadcom/bcm2712-rpi-cm5l-cm4io \
broadcom/bcm2712-rpi-cm5l-cm5io \
broadcom/bcm2712d0-rpi-5-b
SUPPORTED_DEVICES := \
raspberrypi,500 \
raspberrypi,5-compute-module \
raspberrypi,5-model-b
DEVICE_PACKAGES := \
cypress-firmware-43455-sdio \
brcmfmac-nvram-43455-sdio \
kmod-brcmfmac wpad-basic-mbedtls \
kmod-i2c-bcm2835 kmod-spi-bcm2835 \
kmod-i2c-brcmstb \
kmod-i2c-designware-platform kmod-spi-dw-mmio \
kmod-hwmon-pwmfan kmod-thermal \
kmod-usb-net-lan78xx \
kmod-usb-net-rtl8152 \
kmod-r8169
IMAGE/sysupgrade.img.gz := boot-common | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | sdcard-img | gzip
endef
ifeq ($(SUBTARGET),bcm2712)
TARGET_DEVICES += rpi-5
endif
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink