Openwrt/openwrt
0
0
Fork 4
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2025-10-31 20:55:54 +00:00
Code Activity
Files
main
openwrt/target/linux/airoha/patches-6.12/220-07-phy-airoha-Add-support-for-Airoha-AN7581-USB-PHY.patch
Christian Marangi 7afc2da3fc airoha: add pending patch for USB support on AN7581 
Add pending patch for USB support on AN7581 SoC. This is also required
to make operational the 3rd PCIe line that use the USB2 Serdes for PCIe
operations.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2025-10-28 13:14:56 +01:00

668 lines
23 KiB
Diff
Raw Permalink Blame History

From fadd22890b239e5a251dbe47367cfbeb1ea105f7 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Fri, 7 Feb 2025 13:28:40 +0100
Subject: [PATCH 07/10] phy: airoha: Add support for Airoha AN7581 USB PHY
Add support for Airoha AN7581 USB PHY driver. AN7581 supports up to 2
USB port with USB 2.0 mode always supported and USB 3.0 mode available
only if the Serdes port is correctly configured for USB 3.0.
The second USB port on the SoC can be both used for USB 3.0 operation or
PCIe. (toggled by the SCU SSR register and configured by the USB PHY
driver)
If the USB 3.0 mode is not configured, the modes needs to be also
disabled in the xHCI node or the driver will report unsable clock and
fail probe.
Also USB 3.0 PHY instance are provided only if the airoha,serdes-port
and airoha,scu property is defined in DT, if it's not then USB 3.0 PHY
is assumed not supported.
For USB 2.0 Slew Rate calibration, airoha,usb2-monitor-clk-sel is
mandatory and is used to select the monitor clock for calibration.
Normally it's 1 for USB port 1 and 2 for USB port 2.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
MAINTAINERS | 1 +
drivers/phy/airoha/Kconfig | 10 +
drivers/phy/airoha/Makefile | 1 +
drivers/phy/airoha/phy-airoha-usb.c | 597 ++++++++++++++++++++++++++++
4 files changed, 609 insertions(+)
create mode 100644 drivers/phy/airoha/phy-airoha-usb.c
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -742,6 +742,7 @@ M: Christian Marangi <ansuelsmth@gmail.c
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/phy/airoha,an7581-usb-phy.yaml
+F: drivers/phy/airoha/phy-airoha-usb.c
F: include/dt-bindings/phy/airoha,an7581-usb-phy.h
AIRSPY MEDIA DRIVER
--- a/drivers/phy/airoha/Kconfig
+++ b/drivers/phy/airoha/Kconfig
@@ -11,3 +11,13 @@ config PHY_AIROHA_PCIE
Say Y here to add support for Airoha PCIe PHY driver.
This driver create the basic PHY instance and provides initialize
callback for PCIe GEN3 port.
+
+config PHY_AIROHA_USB
+ tristate "Airoha USB PHY Driver"
+ depends on ARCH_AIROHA || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ help
+ Say 'Y' here to add support for Airoha USB PHY driver.
+ This driver create the basic PHY instance and provides initialize
+ callback for USB port.
--- a/drivers/phy/airoha/Makefile
+++ b/drivers/phy/airoha/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o
+obj-$(CONFIG_PHY_AIROHA_USB) += phy-airoha-usb.o
--- /dev/null
+++ b/drivers/phy/airoha/phy-airoha-usb.c
@@ -0,0 +1,596 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author: Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/airoha,scu-ssr.h>
+#include <linux/bitfield.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* SCU */
+#define AIROHA_SCU_SSTR 0x9c
+#define AIROHA_SCU_SSTR_USB_PCIE_SEL BIT(3)
+#define AIROHA_SCU_SSTR_USB_PCIE_SEL_PCIE FIELD_PREP_CONST(AIROHA_SCU_SSTR_USB_PCIE_SEL, 0x0)
+#define AIROHA_SCU_SSTR_USB_PCIE_SEL_USB FIELD_PREP_CONST(AIROHA_SCU_SSTR_USB_PCIE_SEL, 0x1)
+
+/* U2PHY */
+#define AIROHA_USB_PHY_FMCR0 0x100
+#define AIROHA_USB_PHY_MONCLK_SEL GENMASK(27, 26)
+#define AIROHA_USB_PHY_MONCLK_SEL0 FIELD_PREP_CONST(AIROHA_USB_PHY_MONCLK_SEL, 0x0)
+#define AIROHA_USB_PHY_MONCLK_SEL1 FIELD_PREP_CONST(AIROHA_USB_PHY_MONCLK_SEL, 0x1)
+#define AIROHA_USB_PHY_MONCLK_SEL2 FIELD_PREP_CONST(AIROHA_USB_PHY_MONCLK_SEL, 0x2)
+#define AIROHA_USB_PHY_MONCLK_SEL3 FIELD_PREP_CONST(AIROHA_USB_PHY_MONCLK_SEL, 0x3)
+#define AIROHA_USB_PHY_FREQDET_EN BIT(24)
+#define AIROHA_USB_PHY_CYCLECNT GENMASK(23, 0)
+#define AIROHA_USB_PHY_FMMONR0 0x10c
+#define AIROHA_USB_PHY_USB_FM_OUT GENMASK(31, 0)
+#define AIROHA_USB_PHY_FMMONR1 0x110
+#define AIROHA_USB_PHY_FRCK_EN BIT(8)
+
+#define AIROHA_USB_PHY_USBPHYACR4 0x310
+#define AIROHA_USB_PHY_USB20_FS_CR GENMASK(10, 8)
+#define AIROHA_USB_PHY_USB20_FS_CR_MAX FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_CR, 0x0)
+#define AIROHA_USB_PHY_USB20_FS_CR_NORMAL FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_CR, 0x2)
+#define AIROHA_USB_PHY_USB20_FS_CR_SMALLER FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_CR, 0x4)
+#define AIROHA_USB_PHY_USB20_FS_CR_MIN FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_CR, 0x6)
+#define AIROHA_USB_PHY_USB20_FS_SR GENMASK(2, 0)
+#define AIROHA_USB_PHY_USB20_FS_SR_MAX FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_SR, 0x0)
+#define AIROHA_USB_PHY_USB20_FS_SR_NORMAL FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_SR, 0x2)
+#define AIROHA_USB_PHY_USB20_FS_SR_SMALLER FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_SR, 0x4)
+#define AIROHA_USB_PHY_USB20_FS_SR_MIN FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_FS_SR, 0x6)
+#define AIROHA_USB_PHY_USBPHYACR5 0x314
+#define AIROHA_USB_PHY_USB20_HSTX_SRCAL_EN BIT(15)
+#define AIROHA_USB_PHY_USB20_HSTX_SRCTRL GENMASK(14, 12)
+#define AIROHA_USB_PHY_USBPHYACR6 0x318
+#define AIROHA_USB_PHY_USB20_BC11_SW_EN BIT(23)
+#define AIROHA_USB_PHY_USB20_DISCTH GENMASK(7, 4)
+#define AIROHA_USB_PHY_USB20_DISCTH_400 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x0)
+#define AIROHA_USB_PHY_USB20_DISCTH_420 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x1)
+#define AIROHA_USB_PHY_USB20_DISCTH_440 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x2)
+#define AIROHA_USB_PHY_USB20_DISCTH_460 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x3)
+#define AIROHA_USB_PHY_USB20_DISCTH_480 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x4)
+#define AIROHA_USB_PHY_USB20_DISCTH_500 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x5)
+#define AIROHA_USB_PHY_USB20_DISCTH_520 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x6)
+#define AIROHA_USB_PHY_USB20_DISCTH_540 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x7)
+#define AIROHA_USB_PHY_USB20_DISCTH_560 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x8)
+#define AIROHA_USB_PHY_USB20_DISCTH_580 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0x9)
+#define AIROHA_USB_PHY_USB20_DISCTH_600 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0xa)
+#define AIROHA_USB_PHY_USB20_DISCTH_620 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0xb)
+#define AIROHA_USB_PHY_USB20_DISCTH_640 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0xc)
+#define AIROHA_USB_PHY_USB20_DISCTH_660 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0xd)
+#define AIROHA_USB_PHY_USB20_DISCTH_680 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0xe)
+#define AIROHA_USB_PHY_USB20_DISCTH_700 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_DISCTH, 0xf)
+#define AIROHA_USB_PHY_USB20_SQTH GENMASK(3, 0)
+#define AIROHA_USB_PHY_USB20_SQTH_85 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x0)
+#define AIROHA_USB_PHY_USB20_SQTH_90 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x1)
+#define AIROHA_USB_PHY_USB20_SQTH_95 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x2)
+#define AIROHA_USB_PHY_USB20_SQTH_100 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x3)
+#define AIROHA_USB_PHY_USB20_SQTH_105 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x4)
+#define AIROHA_USB_PHY_USB20_SQTH_110 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x5)
+#define AIROHA_USB_PHY_USB20_SQTH_115 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x6)
+#define AIROHA_USB_PHY_USB20_SQTH_120 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x7)
+#define AIROHA_USB_PHY_USB20_SQTH_125 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x8)
+#define AIROHA_USB_PHY_USB20_SQTH_130 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0x9)
+#define AIROHA_USB_PHY_USB20_SQTH_135 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0xa)
+#define AIROHA_USB_PHY_USB20_SQTH_140 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0xb)
+#define AIROHA_USB_PHY_USB20_SQTH_145 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0xc)
+#define AIROHA_USB_PHY_USB20_SQTH_150 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0xd)
+#define AIROHA_USB_PHY_USB20_SQTH_155 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0xe)
+#define AIROHA_USB_PHY_USB20_SQTH_160 FIELD_PREP_CONST(AIROHA_USB_PHY_USB20_SQTH, 0xf)
+
+#define AIROHA_USB_PHY_U2PHYDTM1 0x36c
+#define AIROHA_USB_PHY_FORCE_IDDIG BIT(9)
+#define AIROHA_USB_PHY_IDDIG BIT(1)
+
+#define AIROHA_USB_PHY_GPIO_CTLD 0x80c
+#define AIROHA_USB_PHY_C60802_GPIO_CTLD GENMASK(31, 0)
+#define AIROHA_USB_PHY_SSUSB_IP_SW_RST BIT(31)
+#define AIROHA_USB_PHY_MCU_BUS_CK_GATE_EN BIT(30)
+#define AIROHA_USB_PHY_FORCE_SSUSB_IP_SW_RST BIT(29)
+#define AIROHA_USB_PHY_SSUSB_SW_RST BIT(28)
+
+#define AIROHA_USB_PHY_U3_PHYA_REG0 0xb00
+#define AIROHA_USB_PHY_SSUSB_BG_DIV GENMASK(29, 28)
+#define AIROHA_USB_PHY_SSUSB_BG_DIV_2 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_BG_DIV, 0x0)
+#define AIROHA_USB_PHY_SSUSB_BG_DIV_4 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_BG_DIV, 0x1)
+#define AIROHA_USB_PHY_SSUSB_BG_DIV_8 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_BG_DIV, 0x2)
+#define AIROHA_USB_PHY_SSUSB_BG_DIV_16 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_BG_DIV, 0x3)
+#define AIROHA_USB_PHY_U3_PHYA_REG1 0xb04
+#define AIROHA_USB_PHY_SSUSB_XTAL_TOP_RESERVE GENMASK(25, 10)
+#define AIROHA_USB_PHY_U3_PHYA_REG6 0xb18
+#define AIROHA_USB_PHY_SSUSB_CDR_RESERVE GENMASK(31, 24)
+#define AIROHA_USB_PHY_U3_PHYA_REG8 0xb20
+#define AIROHA_USB_PHY_SSUSB_CDR_RST_DLY GENMASK(7, 6)
+#define AIROHA_USB_PHY_SSUSB_CDR_RST_DLY_32 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_CDR_RST_DLY, 0x0)
+#define AIROHA_USB_PHY_SSUSB_CDR_RST_DLY_64 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_CDR_RST_DLY, 0x1)
+#define AIROHA_USB_PHY_SSUSB_CDR_RST_DLY_128 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_CDR_RST_DLY, 0x2)
+#define AIROHA_USB_PHY_SSUSB_CDR_RST_DLY_216 FIELD_PREP_CONST(AIROHA_USB_PHY_SSUSB_CDR_RST_DLY, 0x3)
+
+#define AIROHA_USB_PHY_U3_PHYA_DA_REG19 0xc38
+#define AIROHA_USB_PHY_SSUSB_PLL_SSC_DELTA1_U3 GENMASK(15, 0)
+
+#define AIROHA_USB_PHY_U2_FM_DET_CYCLE_CNT 1024
+#define AIROHA_USB_PHY_REF_CK 20
+#define AIROHA_USB_PHY_U2_SR_COEF 28
+#define AIROHA_USB_PHY_U2_SR_COEF_DIVISOR 1000
+
+#define AIROHA_USB_PHY_DEFAULT_SR_CALIBRATION 0x5
+#define AIROHA_USB_PHY_FREQDET_SLEEP 1000 /* 1ms */
+#define AIROHA_USB_PHY_FREQDET_TIMEOUT (AIROHA_USB_PHY_FREQDET_SLEEP * 10)
+
+struct airoha_usb_phy_instance {
+ struct phy *phy;
+ u32 type;
+};
+
+enum airoha_usb_phy_instance_type {
+ AIROHA_PHY_USB2,
+ AIROHA_PHY_USB3,
+
+ AIROHA_PHY_USB_MAX,
+};
+
+struct airoha_usb_phy_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap *scu;
+
+ unsigned int monclk_sel;
+ unsigned int serdes_port;
+
+ struct airoha_usb_phy_instance *phys[AIROHA_PHY_USB_MAX];
+};
+
+static void airoha_usb_phy_u2_slew_rate_calibration(struct airoha_usb_phy_priv *priv)
+{
+ u32 fm_out;
+ u32 srctrl;
+
+ /* Enable HS TX SR calibration */
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR5,
+ AIROHA_USB_PHY_USB20_HSTX_SRCAL_EN);
+
+ usleep_range(1000, 1500);
+
+ /* Enable Free run clock */
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_FMMONR1,
+ AIROHA_USB_PHY_FRCK_EN);
+
+ /* Select Monitor Clock */
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_FMCR0,
+ AIROHA_USB_PHY_MONCLK_SEL,
+ FIELD_PREP(AIROHA_USB_PHY_MONCLK_SEL,
+ priv->monclk_sel));
+
+ /* Set cyclecnt */
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_FMCR0,
+ AIROHA_USB_PHY_CYCLECNT,
+ FIELD_PREP(AIROHA_USB_PHY_CYCLECNT,
+ AIROHA_USB_PHY_U2_FM_DET_CYCLE_CNT));
+
+ /* Enable Frequency meter */
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_FMCR0,
+ AIROHA_USB_PHY_FREQDET_EN);
+
+ /* Timeout can happen and we will apply workaround at the end */
+ regmap_read_poll_timeout(priv->regmap, AIROHA_USB_PHY_FMMONR0, fm_out,
+ fm_out, AIROHA_USB_PHY_FREQDET_SLEEP,
+ AIROHA_USB_PHY_FREQDET_TIMEOUT);
+
+ /* Disable Frequency meter */
+ regmap_clear_bits(priv->regmap, AIROHA_USB_PHY_FMCR0,
+ AIROHA_USB_PHY_FREQDET_EN);
+
+ /* Disable Free run clock */
+ regmap_clear_bits(priv->regmap, AIROHA_USB_PHY_FMMONR1,
+ AIROHA_USB_PHY_FRCK_EN);
+
+ /* Disable HS TX SR calibration */
+ regmap_clear_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR5,
+ AIROHA_USB_PHY_USB20_HSTX_SRCAL_EN);
+
+ usleep_range(1000, 1500);
+
+ /* Frequency was not detected, use default SR calibration value */
+ if (!fm_out) {
+ srctrl = AIROHA_USB_PHY_DEFAULT_SR_CALIBRATION;
+ dev_err(priv->dev, "Frequency not detected, using default SR calibration.\n");
+ } else {
+ /* (1024 / FM_OUT) * REF_CK * U2_SR_COEF (round to the nearest digits) */
+ srctrl = AIROHA_USB_PHY_REF_CK * AIROHA_USB_PHY_U2_SR_COEF;
+ srctrl = (srctrl * AIROHA_USB_PHY_U2_FM_DET_CYCLE_CNT) / fm_out;
+ srctrl = DIV_ROUND_CLOSEST(srctrl, AIROHA_USB_PHY_U2_SR_COEF_DIVISOR);
+ dev_dbg(priv->dev, "SR calibration applied: %x\n", srctrl);
+ }
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR5,
+ AIROHA_USB_PHY_USB20_HSTX_SRCTRL,
+ FIELD_PREP(AIROHA_USB_PHY_USB20_HSTX_SRCTRL, srctrl));
+}
+
+static void airoha_usb_phy_u2_init(struct airoha_usb_phy_priv *priv)
+{
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR4,
+ AIROHA_USB_PHY_USB20_FS_CR,
+ AIROHA_USB_PHY_USB20_FS_CR_MIN);
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR4,
+ AIROHA_USB_PHY_USB20_FS_SR,
+ AIROHA_USB_PHY_USB20_FS_SR_NORMAL);
+
+ /* FIXME: evaluate if needed */
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR6,
+ AIROHA_USB_PHY_USB20_SQTH,
+ AIROHA_USB_PHY_USB20_SQTH_130);
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR6,
+ AIROHA_USB_PHY_USB20_DISCTH,
+ AIROHA_USB_PHY_USB20_DISCTH_600);
+
+ /* Enable the USB port and then disable after calibration */
+ regmap_clear_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR6,
+ AIROHA_USB_PHY_USB20_BC11_SW_EN);
+
+ airoha_usb_phy_u2_slew_rate_calibration(priv);
+
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR6,
+ AIROHA_USB_PHY_USB20_BC11_SW_EN);
+
+ usleep_range(1000, 1500);
+}
+
+/*
+ * USB 3.0 mode can only work if USB serdes is correctly set.
+ * This is validated in xLate function.
+ */
+static void airoha_usb_phy_u3_init(struct airoha_usb_phy_priv *priv)
+{
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_U3_PHYA_REG8,
+ AIROHA_USB_PHY_SSUSB_CDR_RST_DLY,
+ AIROHA_USB_PHY_SSUSB_CDR_RST_DLY_32);
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_U3_PHYA_REG6,
+ AIROHA_USB_PHY_SSUSB_CDR_RESERVE,
+ FIELD_PREP(AIROHA_USB_PHY_SSUSB_CDR_RESERVE, 0xe));
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_U3_PHYA_REG0,
+ AIROHA_USB_PHY_SSUSB_BG_DIV,
+ AIROHA_USB_PHY_SSUSB_BG_DIV_4);
+
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_U3_PHYA_REG1,
+ FIELD_PREP(AIROHA_USB_PHY_SSUSB_XTAL_TOP_RESERVE, 0x600));
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_U3_PHYA_DA_REG19,
+ AIROHA_USB_PHY_SSUSB_PLL_SSC_DELTA1_U3,
+ FIELD_PREP(AIROHA_USB_PHY_SSUSB_PLL_SSC_DELTA1_U3, 0x43));
+}
+
+static int airoha_usb_phy_init(struct phy *phy)
+{
+ struct airoha_usb_phy_instance *instance = phy_get_drvdata(phy);
+ struct airoha_usb_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ airoha_usb_phy_u2_init(priv);
+ break;
+ case PHY_TYPE_USB3:
+ if (phy_get_mode(phy) == PHY_MODE_PCIE)
+ return 0;
+
+ airoha_usb_phy_u3_init(priv);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int airoha_usb_phy_u2_power_on(struct airoha_usb_phy_priv *priv)
+{
+ regmap_clear_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR6,
+ AIROHA_USB_PHY_USB20_BC11_SW_EN);
+
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
+static int airoha_usb_phy_u3_power_on(struct airoha_usb_phy_priv *priv)
+{
+ regmap_clear_bits(priv->regmap, AIROHA_USB_PHY_GPIO_CTLD,
+ AIROHA_USB_PHY_SSUSB_IP_SW_RST |
+ AIROHA_USB_PHY_MCU_BUS_CK_GATE_EN |
+ AIROHA_USB_PHY_FORCE_SSUSB_IP_SW_RST |
+ AIROHA_USB_PHY_SSUSB_SW_RST);
+
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
+static int airoha_usb_phy_power_on(struct phy *phy)
+{
+ struct airoha_usb_phy_instance *instance = phy_get_drvdata(phy);
+ struct airoha_usb_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ airoha_usb_phy_u2_power_on(priv);
+ break;
+ case PHY_TYPE_USB3:
+ if (phy_get_mode(phy) == PHY_MODE_PCIE)
+ return 0;
+
+ airoha_usb_phy_u3_power_on(priv);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int airoha_usb_phy_u2_power_off(struct airoha_usb_phy_priv *priv)
+{
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_USBPHYACR6,
+ AIROHA_USB_PHY_USB20_BC11_SW_EN);
+
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
+static int airoha_usb_phy_u3_power_off(struct airoha_usb_phy_priv *priv)
+{
+ regmap_set_bits(priv->regmap, AIROHA_USB_PHY_GPIO_CTLD,
+ AIROHA_USB_PHY_SSUSB_IP_SW_RST |
+ AIROHA_USB_PHY_FORCE_SSUSB_IP_SW_RST);
+
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
+static int airoha_usb_phy_power_off(struct phy *phy)
+{
+ struct airoha_usb_phy_instance *instance = phy_get_drvdata(phy);
+ struct airoha_usb_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ airoha_usb_phy_u2_power_off(priv);
+ break;
+ case PHY_TYPE_USB3:
+ if (phy_get_mode(phy) == PHY_MODE_PCIE)
+ return 0;
+
+ airoha_usb_phy_u3_power_off(priv);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int airoha_usb_phy_u2_set_mode(struct airoha_usb_phy_priv *priv,
+ enum phy_mode mode)
+{
+ u32 val;
+
+ /*
+ * For Device and Host mode, enable force IDDIG.
+ * For Device set IDDIG, for Host clear IDDIG.
+ * For OTG disable force and clear IDDIG bit while at it.
+ */
+ switch (mode) {
+ case PHY_MODE_USB_DEVICE:
+ val = AIROHA_USB_PHY_IDDIG;
+ break;
+ case PHY_MODE_USB_HOST:
+ val = AIROHA_USB_PHY_FORCE_IDDIG |
+ AIROHA_USB_PHY_FORCE_IDDIG;
+ break;
+ case PHY_MODE_USB_OTG:
+ val = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ regmap_update_bits(priv->regmap, AIROHA_USB_PHY_U2PHYDTM1,
+ AIROHA_USB_PHY_FORCE_IDDIG |
+ AIROHA_USB_PHY_IDDIG, val);
+
+ return 0;
+}
+
+static int airoha_usb_phy_u3_set_mode(struct airoha_usb_phy_priv *priv,
+ enum phy_mode mode)
+{
+ u32 sel;
+
+ /* Only USB2 supports PCIe mode */
+ if (mode == PHY_MODE_PCIE &&
+ priv->serdes_port != AIROHA_SCU_SERDES_USB2)
+ return -EINVAL;
+
+ if (mode == PHY_MODE_PCIE)
+ sel = AIROHA_SCU_SSTR_USB_PCIE_SEL_PCIE;
+ else
+ sel = AIROHA_SCU_SSTR_USB_PCIE_SEL_USB;
+
+ regmap_update_bits(priv->scu, AIROHA_SCU_SSTR,
+ AIROHA_SCU_SSTR_USB_PCIE_SEL, sel);
+
+ return 0;
+}
+
+static int airoha_usb_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct airoha_usb_phy_instance *instance = phy_get_drvdata(phy);
+ struct airoha_usb_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ return airoha_usb_phy_u2_set_mode(priv, mode);
+ case PHY_TYPE_USB3:
+ return airoha_usb_phy_u3_set_mode(priv, mode);
+ default:
+ return 0;
+ }
+}
+
+static struct phy *airoha_usb_phy_xlate(struct device *dev,
+ const struct of_phandle_args *args)
+{
+ struct airoha_usb_phy_priv *priv = dev_get_drvdata(dev);
+ struct airoha_usb_phy_instance *instance = NULL;
+ unsigned int index, phy_type;
+
+ if (args->args_count != 1) {
+ dev_err(dev, "invalid number of cells in 'phy' property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ phy_type = args->args[0];
+ if (!(phy_type == PHY_TYPE_USB2 || phy_type == PHY_TYPE_USB3)) {
+ dev_err(dev, "unsupported device type: %d\n", phy_type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ for (index = 0; index < AIROHA_PHY_USB_MAX; index++)
+ if (priv->phys[index] &&
+ phy_type == priv->phys[index]->type) {
+ instance = priv->phys[index];
+ break;
+ }
+
+ if (!instance) {
+ dev_err(dev, "failed to find appropriate phy\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return instance->phy;
+}
+
+static const struct phy_ops airoha_phy = {
+ .init = airoha_usb_phy_init,
+ .power_on = airoha_usb_phy_power_on,
+ .power_off = airoha_usb_phy_power_off,
+ .set_mode = airoha_usb_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct regmap_config airoha_usb_phy_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int airoha_usb_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct airoha_usb_phy_priv *priv;
+ struct device *dev = &pdev->dev;
+ unsigned int index;
+ void *base;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ ret = of_property_read_u32(dev->of_node, "airoha,usb2-monitor-clk-sel",
+ &priv->monclk_sel);
+ if (ret)
+ return dev_err_probe(dev, ret, "Monitor clock selection is mandatory for USB PHY calibration.\n");
+
+ if (priv->monclk_sel > 3)
+ return dev_err_probe(dev, -EINVAL, "only 4 Monitor clock are selectable on the SoC.\n");
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->regmap = devm_regmap_init_mmio(dev, base, &airoha_usb_phy_regmap_config);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ platform_set_drvdata(pdev, priv);
+
+ for (index = 0; index < AIROHA_PHY_USB_MAX; index++) {
+ enum airoha_usb_phy_instance_type phy_type;
+ struct airoha_usb_phy_instance *instance;
+
+ switch (index) {
+ case AIROHA_PHY_USB2:
+ phy_type = PHY_TYPE_USB2;
+ break;
+ case AIROHA_PHY_USB3:
+ phy_type = PHY_TYPE_USB3;
+ break;
+ }
+
+ /* Skip registering USB3 instance if not supported */
+ if (phy_type == PHY_TYPE_USB3) {
+ ret = of_property_read_u32(dev->of_node, "airoha,serdes-port",
+ &priv->serdes_port);
+ if (ret)
+ continue;
+
+ /* With Serdes Port property, SCU is required */
+ priv->scu = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "airoha,scu");
+ if (IS_ERR(priv->scu))
+ return dev_err_probe(dev, PTR_ERR(priv->scu), "failed to get SCU syscon.\n");
+ }
+
+ instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
+ if (!instance)
+ return -ENOMEM;
+
+ instance->type = phy_type;
+ priv->phys[index] = instance;
+
+ instance->phy = devm_phy_create(dev, NULL, &airoha_phy);
+ if (IS_ERR(instance->phy))
+ return dev_err_probe(dev, PTR_ERR(instance->phy), "failed to create phy\n");
+
+ phy_set_drvdata(instance->phy, instance);
+ }
+
+ phy_provider = devm_of_phy_provider_register(&pdev->dev, airoha_usb_phy_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id airoha_phy_id_table[] = {
+ { .compatible = "airoha,an7581-usb-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, airoha_phy_id_table);
+
+static struct platform_driver airoha_usb_driver = {
+ .probe = airoha_usb_phy_probe,
+ .driver = {
+ .name = "airoha-usb-phy",
+ .of_match_table = airoha_phy_id_table,
+ },
+};
+
+module_platform_driver(airoha_usb_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Airoha USB PHY driver");
View Git Blame Copy Permalink