mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2025-10-31 10:15:47 +00:00
5d2994a73e
Specifications:
SOC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
Flash: SPI NOR 8MB (Winbond W25Q64DW) + NAND 128MB (Winbond W25N01GWZEIG)
Memory: 512MB DDR3L
Standard: 802.11ax/ac/b/g/n
2.4G Frequency: 2.4GHz - 2.484GHz
2.4G Wi-Fi standard: 802.11b/g/n/ax
5G Frequency: 5.150GHz~5.850GHz
5G Wi-Fi Standard: 802.11 a/n/ac/ax
Buttons: 1 * Reset button, press 10 seconds to revert to default setting
2.4G Antenna: 2*2.4GHz/5.8GHz dual band antenna: 4dBi
5G Antenna: 2*5.8G antenna: 4dBi
Data Rate: 2.4GHz: 574Mbps, 5GHz:4800Mbps
Power: PoE 802.3at，DC2.0 12V/2A
Max Power Consumption: < 22W
LED Light: WAN, LAN, tricolor LED(sys-red, 2.4G-green, 5.8G-blue)
BACKUP YOUR STOCK FIRMWARE:
- Put openwrt-*-initramfs-uImage.itb to your
TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli
and exec these commands:
```
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
```
- Once boot completed and you get the openwrt shell
execute below commands:
```
device=ax850
mkdir -p /tmp/fw_backup; cd /tmp/fw_backup
rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
dd if=/dev/${rootfs} of=rootfs_${rootfs} bs=1M
dd if=/dev/${rootfs_1} of=rootfs_1_${rootfs_1} bs=1M
cp /sys/firmware/fdt fdt.dtb
md5sum * > md5sum
tar -cvzf /tmp/${device}.tar.gz .
sum=$(md5sum /tmp/${device}.tar.gz | cut -d' ' -f1)
mv /tmp/${device}.tar.gz /tmp/${device}_${sum}.tar.gz
echo "stock fw backup saved to: /tmp/${device}_${sum}.tar.gz"
```
- Upload/save your backup to a safe place.
STOCK FIRMWARE RECOVERY:
- Boot initramfs image
- Upload your backed-up stock fw tarball to the device
using scp or download it from the device using wget.
- Enter device ssh cli or tty and exec:
```
cd /tmp && wget <your_web_server_ip>/${stock_fw_backup}.tar.gz`
tar -xpzf ${stock_fw_backup}.tar.gz
rootfs=$(cat /proc/mtd | grep \"rootfs\" | cut -d: -f1)
rootfs_1=$(cat /proc/mtd | grep \"rootfs_1\" | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f /tmp/rootfs_${rootfs}
ubiformat /dev/${rootfs_1} -y -f /tmp/rootfs_1_${rootfs_1}
reboot
```
INSTALLATION:
1. initramfs method
- Put openwrt-*-initramfs-uImage.itb to your
TFTP server and rename it to initramfs.bin
- Enable serial console and enter to u-boot cli
and exec these commands:
```
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
```
- Once boot completed and you get the openwrt shell
execute below commands:
```
cd /tmp && wget <your_web_server_ip>/factory.ubi`
export rootfs=$(cat /proc/mtd | grep rootfs | cut -d: -f1)
export rootfs_1=$(cat /proc/mtd | grep rootfs_1 | cut -d: -f1)
ubiformat /dev/${rootfs} -y -f factory.ubi
ubiformat /dev/${rootfs_1} -y -f factory.ubi
reboot
```
2. u-boot factory.ubi image method
- Put factory.ubi to your TFTP server and
enter u-boot cli and exec these commands:
```
tftpboot <your_tftp_server_ip>:factory.ubi
#After downloading is finished:
flash rootfs
flash rootfs_1
reset
```
Signed-off-by: Shubham Vishwakarma <shubhamvis98@fossfrog.in>
Link: https://github.com/openwrt/openwrt/pull/19712
Signed-off-by: Robert Marko <robimarko@gmail.com>
38 lines
759 B
Plaintext
38 lines
759 B
Plaintext
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
elecom,wrc-x3000gs2|\
|
|
iodata,wn-dax3000gr)
|
|
ubootenv_add_mtd "0:appsblenv" "0x0" "0x40000" "0x20000"
|
|
;;
|
|
glinet,gl-b3000)
|
|
ubootenv_add_mtd "0:APPSBLENV" "0x0" "0x40000" "0x20000"
|
|
;;
|
|
linksys,mr5500|\
|
|
linksys,mx2000|\
|
|
linksys,mx5500|\
|
|
linksys,spnmx56)
|
|
ubootenv_add_mtd "u_env" "0x0" "0x40000" "0x20000"
|
|
;;
|
|
xiaomi,ax6000)
|
|
ubootenv_add_mtd "0:appsblenv" "0x0" "0x10000" "0x20000"
|
|
ubootenv_add_sys_mtd "bdata" "0x0" "0x10000" "0x20000"
|
|
;;
|
|
yuncore,ax830|\
|
|
yuncore,ax850)
|
|
ubootenv_add_mtd "0:APPSBLENV" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config
|
|
|
|
exit 0
|