mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-25 05:16:24 +00:00
573a39b36c
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ief3da306a6e1978de7dfb8f552f9ff23151f9944
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7030
Tested-by: jenkins
32 lines
934 B
INI
32 lines
934 B
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
adapter srst delay 200
|
|
jtag_ntrst_delay 200
|
|
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately
|
|
reset_config trst_and_srst srst_pulls_trst
|
|
|
|
#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
|
|
adapter assert trst assert srst
|
|
adapter deassert trst deassert srst
|
|
|
|
#jtag scan chain
|
|
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
|
|
jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f
|
|
|
|
#target configuration
|
|
#daemon_startup reset
|
|
|
|
set _TARGETNAME [format "%s.cpu" lpc2148]
|
|
target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
soft_reset_halt
|
|
mvb 0xE01FC040 0x01
|
|
}
|
|
|
|
|
|
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
|