mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-14 18:37:11 +00:00
62f76b2169
Added NPCX flash driver to support the Nuvoton NPCX4/K3 series microcontrollers. Add config file for these series. Change-Id: I0b6e128fa51146b561f422e23a98260594b1f138 Signed-off-by: Luca Hung <YCHUNG0@nuvoton.com> Signed-off-by: Mulin CHao <mlchao@nuvoton.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7794 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
58 lines
1.5 KiB
INI
58 lines
1.5 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# script for Nuvoton NPCX Cortex-M4 Series
|
|
|
|
# Adapt based on what transport is active.
|
|
source [find target/swj-dp.tcl]
|
|
|
|
# Set Chipname
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME npcx
|
|
}
|
|
|
|
# SWD DAP ID of Nuvoton NPCX Cortex-M4.
|
|
if { [info exists CPUDAPID ] } {
|
|
set _CPUDAPID $CPUDAPID
|
|
} else {
|
|
set _CPUDAPID 0x4BA00477
|
|
}
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 32kB
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x8000
|
|
}
|
|
|
|
if { [info exists FIUNAME]} {
|
|
set _FIUNAME $FIUNAME
|
|
} else {
|
|
set _FIUNAME npcx.fiu
|
|
}
|
|
|
|
# Debug Adapter Target Settings
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUDAPID
|
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x200c0000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
# Initial JTAG/SWD speed
|
|
# For safety purposes, set for the lowest cpu clock configuration
|
|
# 4MHz / 6 = 666KHz, so use 600KHz for it
|
|
adapter speed 600
|
|
|
|
# For safety purposes, set for the lowest cpu clock configuration
|
|
$_TARGETNAME configure -event reset-start {adapter speed 600}
|
|
|
|
# use sysresetreq to perform a system reset
|
|
cortex_m reset_config sysresetreq
|
|
|
|
# flash configuration
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME npcx 0x64000000 0 0 0 $_TARGETNAME $_FIUNAME
|