mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-14 18:37:11 +00:00
5193f61cf5
Change-Id: Iec5aba3a082f2e25f21d7ca173ed710894b370a4 Signed-off-by: Rocco Marco Guglielmi <roccomarco.guglielmi@gmail.com> Change-Id: Ia83850e326661c8acb0712a280fdf961258322a4 Reviewed-on: https://review.openocd.org/c/openocd/+/7373 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
33 lines
1.2 KiB
INI
33 lines
1.2 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# Maxim Integrated MAX32625 OpenOCD target configuration file
|
|
# www.maximintegrated.com
|
|
|
|
# adapter speed
|
|
adapter speed 4000
|
|
|
|
# reset pin configuration
|
|
reset_config srst_only
|
|
|
|
if {[using_jtag]} {
|
|
jtag newtap max32625 cpu -irlen 4 -irmask 0xf -expected-id 0x4ba00477 -ignore-version
|
|
jtag newtap maxtest tap -irlen 4 -irmask 0xf -ircapture 0x1 -expected-id 0x07f71197 -ignore-version
|
|
} else {
|
|
swd newdap max32625 cpu -irlen 4 -irmask 0xf -expected-id 0x2ba01477 -ignore-version
|
|
}
|
|
|
|
dap create max32625.dap -chain-position max32625.cpu
|
|
|
|
# target configuration
|
|
target create max32625.cpu cortex_m -dap max32625.dap
|
|
max32625.cpu configure -work-area-phys 0x20005000 -work-area-size 0x2000
|
|
|
|
# Config Command: flash bank name driver base size chip_width bus_width target [driver_options]
|
|
# flash bank <name> max32xxx <base> <size> 0 0 <target> <flc base> <sector> <clk> <burst>
|
|
# max32625 flash base address 0x00000000
|
|
# max32625 flash size 0x80000 (512k)
|
|
# max32625 FLC base address 0x40002000
|
|
# max32625 sector (page) size 0x2000 (8kB)
|
|
# max32625 clock speed 96 (MHz)
|
|
flash bank max32625.flash max32xxx 0x00000000 0x80000 0 0 max32625.cpu 0x40002000 0x2000 96
|