mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-22 09:36:27 +00:00
573a39b36c
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ief3da306a6e1978de7dfb8f552f9ff23151f9944
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7030
Tested-by: jenkins
98 lines
4.0 KiB
INI
98 lines
4.0 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
uplevel #0 [list source [find chip/atmel/at91/at91sam9_sdramc.cfg]]
|
|
uplevel #0 [list source [find chip/atmel/at91/at91_pmc.cfg]]
|
|
uplevel #0 [list source [find chip/atmel/at91/at91_pio.cfg]]
|
|
uplevel #0 [list source [find chip/atmel/at91/at91_rstc.cfg]]
|
|
uplevel #0 [list source [find chip/atmel/at91/at91_wdt.cfg]]
|
|
|
|
proc at91sam9_reset_start { } {
|
|
|
|
arm7_9 fast_memory_access disable
|
|
|
|
jtag_rclk 8
|
|
halt
|
|
wait_halt 10000
|
|
set rstc_mr_val $::AT91_RSTC_KEY
|
|
set rstc_mr_val [expr {$rstc_mr_val | (5 << 8)}]
|
|
set rstc_mr_val [expr {$rstc_mr_val | $::AT91_RSTC_URSTEN}]
|
|
mww $::AT91_RSTC_MR $rstc_mr_val ;# RSTC_MR : enable user reset.
|
|
}
|
|
|
|
proc at91sam9_reset_init { config } {
|
|
|
|
mww $::AT91_WDT_MR $config(wdt_mr_val) ;# disable watchdog
|
|
|
|
set ckgr_mor [expr {$::AT91_PMC_MOSCEN | (255 << 8)}]
|
|
|
|
mww $::AT91_CKGR_MOR $ckgr_mor ;# CKGR_MOR - enable main osc.
|
|
while { [expr {[mrw $::AT91_PMC_SR] & $::AT91_PMC_MOSCS}] != $::AT91_PMC_MOSCS } { sleep 1 }
|
|
|
|
set pllar_val $::AT91_PMC_PLLA_WR_ERRATA ;# Bit 29 must be 1 when prog
|
|
set pllar_val [expr {$pllar_val | $::AT91_PMC_OUT}]
|
|
set pllar_val [expr {$pllar_val | $::AT91_PMC_PLLCOUNT}]
|
|
set pllar_val [expr {$pllar_val | ($config(master_pll_mul) - 1) << 16}]
|
|
set pllar_val [expr {$pllar_val | $config(master_pll_div)}]
|
|
|
|
mww $::AT91_CKGR_PLLAR $pllar_val ;# CKGR_PLLA - (18.432MHz/13)*141 = 199.9 MHz
|
|
while { [expr {[mrw $::AT91_PMC_SR] & $::AT91_PMC_LOCKA}] != $::AT91_PMC_LOCKA } { sleep 1 }
|
|
|
|
;# PCK/2 = MCK Master Clock from PLLA
|
|
set mckr_val $::AT91_PMC_CSS_PLLA
|
|
set mckr_val [expr {$mckr_val | $::AT91_PMC_PRES_1}]
|
|
set mckr_val [expr {$mckr_val | $::AT91SAM9_PMC_MDIV_2}]
|
|
set mckr_val [expr {$mckr_val | $::AT91_PMC_PDIV_1}]
|
|
|
|
mww $::AT91_PMC_MCKR $mckr_val ;# PMC_MCKR (MCLK: 0x102 - (CLK/2)MHZ, 0x202 - (CLK/3)MHz)
|
|
while { [expr {[mrw $::AT91_PMC_SR] & $::AT91_PMC_MCKRDY}] != $::AT91_PMC_MCKRDY } { sleep 1 }
|
|
|
|
## switch JTAG clock to highspeed clock
|
|
jtag_rclk 0
|
|
|
|
arm7_9 dcc_downloads enable ;# Enable faster DCC downloads
|
|
arm7_9 fast_memory_access enable
|
|
|
|
set rstc_mr_val $::AT91_RSTC_KEY
|
|
set rstc_mr_val [expr {$rstc_mr_val | $::AT91_RSTC_URSTEN}]
|
|
mww $::AT91_RSTC_MR $rstc_mr_val ;# user reset enable
|
|
|
|
if { [info exists config(sdram_piod)] } {
|
|
set pdr_addr [expr {$::AT91_PIOD + $::PIO_PDR}]
|
|
set pudr_addr [expr {$::AT91_PIOD + $::PIO_PUDR}]
|
|
set asr_addr [expr {$::AT91_PIOD + $::PIO_ASR}]
|
|
mww $pdr_addr 0xffff0000 ;# define PDC[31:16] as DATA[31:16]
|
|
mww $pudr_addr 0xffff0000 ;# no pull-up for D[31:16]
|
|
mww $asr_addr 0xffff0000
|
|
} else {
|
|
set pdr_addr [expr {$::AT91_PIOC + $::PIO_PDR}]
|
|
set pudr_addr [expr {$::AT91_PIOC + $::PIO_PUDR}]
|
|
mww $pdr_addr 0xffff0000 ;# define PDC[31:16] as DATA[31:16]
|
|
mww $pudr_addr 0xffff0000 ;# no pull-up for D[31:16]
|
|
}
|
|
|
|
mww $config(matrix_ebicsa_addr) $config(matrix_ebicsa_val)
|
|
mww $::AT91_SDRAMC_MR $::AT91_SDRAMC_MODE_NORMAL ;# SDRAMC_MR Mode register
|
|
mww $::AT91_SDRAMC_TR $config(sdram_tr_val) ;# SDRAMC_TR - Refresh Timer register
|
|
mww $::AT91_SDRAMC_CR $config(sdram_cr_val) ;# SDRAMC_CR - Configuration register
|
|
mww $::AT91_SDRAMC_MDR $::AT91_SDRAMC_MD_SDRAM ;# Memory Device Register -> SDRAM
|
|
mww $::AT91_SDRAMC_MR $::AT91_SDRAMC_MODE_PRECHARGE ;# SDRAMC_MR
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $::AT91_SDRAMC_MR $::AT91_SDRAMC_MODE_REFRESH ;# SDRC_MR
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $::AT91_SDRAMC_MR $::AT91_SDRAMC_MODE_LMR ;# SDRC_MR
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $::AT91_SDRAMC_MR $::AT91_SDRAMC_MODE_NORMAL ;# SDRC_MR
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
mww $::AT91_SDRAMC_TR 1200 ;# SDRAM_TR
|
|
mww $config(sdram_base) 0 ;# SDRAM_BASE
|
|
|
|
mww $::AT91_MATRIX 0xf ;# MATRIX_MCFG - REMAP all masters
|
|
}
|