1
0
mirror of https://git.code.sf.net/p/openocd/code synced 2024-11-25 15:46:25 +00:00
openocd/tcl/board/nxp/frdm-kv11z-jlink.cfg
Marc Schink 84126893ff tcl/board: Add config for NXP FRDM-KV11Z
Change-Id: I9cd497a085f8f9c7854ae3b96e60a73b3b050d0e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8298
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
2024-06-08 08:46:24 +00:00

22 lines
525 B
INI

# SPDX-License-Identifier: GPL-2.0-or-later
# Configuration file for NXP FRDM-KV11Z development boards.
#
# This configuration file is only for FRDM-KV11Z development boards with the
# SEGGER J-Link OpenSDA firmware, see:
# https://www.segger.com/products/debug-probes/j-link/models/other-j-links/opensda-sda-v2/
source [find interface/jlink.cfg]
# Set working area size to 16 KiB.
set WORKAREASIZE 0x4000
# Set the chip name.
set CHIPNAME kv11z
transport select swd
source [find target/kx.cfg]
reset_config srst_only