mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-25 02:56:23 +00:00
4157732bd8
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
43 lines
1.1 KiB
INI
43 lines
1.1 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
################################################################################
|
|
# Author: Michael Trensch (MTrensch@googlemail.com)
|
|
################################################################################
|
|
|
|
source [find target/hilscher_netx500.cfg]
|
|
|
|
reset_config trst_and_srst
|
|
adapter srst delay 500
|
|
jtag_ntrst_delay 500
|
|
|
|
$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
halt
|
|
|
|
arm7_9 fast_memory_access enable
|
|
arm7_9 dcc_downloads enable
|
|
|
|
sdram_fix
|
|
|
|
puts "Configuring SDRAM controller for paired K4S561632C (64MB) "
|
|
mww 0x00100140 0
|
|
mww 0x00100144 0x03C13261
|
|
mww 0x00100140 0x030D0121
|
|
|
|
puts "Configuring SRAM nCS0 for 150ns paired Par. Flash (x32)"
|
|
mww 0x00100100 0x0201000E
|
|
|
|
flash probe 0
|
|
}
|
|
|
|
#####################
|
|
# Flash configuration
|
|
#####################
|
|
|
|
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
|
|
flash bank parflash cfi 0xC0000000 0x02000000 4 4 $_TARGETNAME
|
|
|
|
init
|
|
reset init
|