mirror of
https://git.code.sf.net/p/openocd/code
synced 2024-11-25 04:06:24 +00:00
4157732bd8
For historical reasons, no license information was added to the
tcl files. This makes trivial adding the SPDX tag through script:
fgrep -rL SPDX tcl/board | while read a;do \
sed -i '1{i# SPDX-License-Identifier: GPL-2.0-or-later\n
}' $a;done
With no specific license information from the author, let's extend
the OpenOCD project license GPL-2.0-or-later to the files.
Change-Id: Ibcf7da62e842aafd036a78db9ea2b9f11f79af16
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7028
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
40 lines
1.1 KiB
INI
40 lines
1.1 KiB
INI
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
|
|
# http://www.tincantools.com
|
|
|
|
source [find target/samsung_s3c2410.cfg]
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
# Reset Script for the TinCanTools S3C2410 Based Hammer Module
|
|
# http://www.tincantools.com
|
|
#
|
|
# Setup primary clocks and initialize the SDRAM
|
|
mww 0x53000000 0x00000000
|
|
mww 0x4a000008 0xffffffff
|
|
mww 0x4a00000c 0x000007ff
|
|
mww 0x4c000000 0x00ffffff
|
|
mww 0x4c000014 0x00000003
|
|
mww 0x4c000004 0x000a1031
|
|
mww 0x48000000 0x11111122
|
|
mww 0x48000004 0x00000700
|
|
mww 0x48000008 0x00000700
|
|
mww 0x4800000c 0x00000700
|
|
mww 0x48000010 0x00000700
|
|
mww 0x48000014 0x00000700
|
|
mww 0x48000018 0x00000700
|
|
mww 0x4800001c 0x00018005
|
|
mww 0x48000020 0x00018005
|
|
mww 0x48000024 0x009c0459
|
|
mww 0x48000028 0x000000b2
|
|
mww 0x4800002c 0x00000030
|
|
mww 0x48000030 0x00000030
|
|
flash probe 0
|
|
}
|
|
|
|
|
|
#flash configuration
|
|
#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target> [driver_options ...]
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME cfi 0x00000000 0x1000000 2 2 $_TARGETNAME
|