Android/edl

Fork 0

mirror of https://github.com/bkerler/edl synced 2024-11-11 11:29:34 +00:00

ColdWindScholar 3b9a6927fb Normative code

2024-06-10 01:44:14 +08:00

7.0 KiB

Executable File

Raw Permalink Blame History

Challenge/Response Generator for Sierra Wireless Cards V1.2

Why

For enabling development mode and tests
For setting band options if locked

Supported devices

"MDM8200": ["M81A", "M81B", "AC880", "AC881", "MC8780", "MC8781", "AC880E", "AC881E", "EM8780", "EM8781",
            "MC8780V", "MC8781V", "MC8700", "AC308U"],
"MDM9200": ["AC710", "MC8775", "MC8775V", "AC875", "MC8700", "AC313U", "MC8801", "MC7700", "MC7750", "MC7710",
            "EM7700"],
"MDM9200_V1": ["AC710", "MC8775", "MC8775V", "AC875", "MC8700", "AC313U", "MC8801", "MC7700", "MC7750",
               "MC7710", "EM7700"],
"MDM9200_V2": ["AC775", "PC7200"],
"MDM9x15": ["SWI9X15C", "AR7550", "AR7552", "AR7554", "EM7355", "EM7655", "MC7354", "WP7100", "WP7102", "WP7104",
            "MC7305", "EM7305", "MC8805", "EM8805", "MC7350", "MC7350-L", "MC7802", "MC7304", "AR7556", "AR7558",
            "WP75xx", "WP85xx", "WP8548", "WP8548G", "AC340U"],
"MDM9x30": ["EM7455", "MC7455", "EM7430", "MC7430"],
"MDM9x30_V1": ["Netgear AC790S/AC791L"],
"MDM9x40": ["MR1100", "AC815s", "AC785s"],
"MDM9x50": ["EM7565", "EM7565-9", "EM7511"],
"MDM9x06": ["WP77xx"],
"MDM9x07": ["SWI9X07Y", "WP76xx"],
"SDX65": ["MR6400", "MR6500", "MR6110", "MR6150", "MR6450", "MR6550"]

Installation

Get python >=3.6 64-Bit
```
~> pip3 install -r requirements.txt
```

Usage

Get a specific challenge for your task from the modem
```
AT!OPENLOCK?
```
or
```
AT!OPENMEP?
```
or
```
AT!OPENCND?
```
Run generator: For automatic unlock, use -u:
```
~> sierrakeygen -u
```
For AT!OPENLOCK use -l, for AT!OPENMEP use -m and for AT!OPENCND use -c accordingly (here challenge is BE96CBBEE0829BCA and device generation is MDM9200)
```
~> sierrakeygen -l BE96CBBEE0829BCA -d MDM9200
```

Send generated response back to the modem

AT!OPENLOCK=[response from generator]

AT!OPENMEP=[response from generator]

AT!OPENCND=[response from generator]

Open up a terminal and enable enhanced commands (generic pwd is "A710")

AT!ENTERCND=A710

Other known pwds are (thx to 4PDA):

AC815s: "fallow"
MR1100: “lindeman”
AC790-Telstra: "sunflower"
LB1111: "granville"
AC810-100EUS: "whistler"
AC810S-1P1PLS: "seymour"
AC810S-1TLAUS: "grouse"
AC810S-1RDQAS: "cypress"
AC790-100EUS: "lavender"
AC790S-1SPSUS : "bluebell"

After unlocking via AT!OPENLOCK, you can also set a new password via AT!SETCND="pwd", in case the password isn't known

Help

```bash
~> sierrakeygen -h
```

Remarks

MDM9200/MDM9x15/MDM9x30/MDM9x40/MDM9x50 confirmed to work
For AC785/AC790/AC810/MR1100, you can access the serial port via tcp:
```
HostName: 192.168.1.1
Port: 5510
ConnectionType: Telnet
```
Get firmware details :
```
ATI
AT!PACKAGE?
```
Get flash memory info :
```
AT!FMBADBLOCKS?
AT!BSINFO
```
Set password for opencnd:
```
AT!SETCND="[pwd]"
```
Example:
```
AT!SETCND="A710"
```
For band selection, see possible bands via :
```
AT!BAND=?
```
Set Modem to use all bands :
```
AT!BAND=00
```
Set Modem to only use LTE :
```
AT!SELRAT=06
```
Reboot modem and save settings :
```
AT!RESET
```

To add a new band :

AT!BAND=[index],"[name]",0,8000000

Examples:

AT!BAND=03,"LTE B28 700",0,8000000
AT!BAND=04,"LTE B1 2100",0,1
AT!BAND=05,"LTE B3 1800",0,4
AT!BAND=06,"LTE B7 2600",0,40
AT!BAND=07,"LTE B8 900",0,80

To remove a band :

AT!BAND=[index],"",0,0

Example:

AT!BAND=03,"",0,0

Get signal info :
```
AT!GSTATUS?
```
Get partition info :
```
AT!PARTINFO?
```
Switch to qc download mode :
```
AT!BOOTHOLD
AT!QPSTDLOAD
```

Show Secure Boot info :

AT!SECBOOTCFG?       Show Secure Boot config
AT!SECBOOTPKHASH?    Show Secure Boot PKHASH

Show Product Info :

AT!USBPRODUCT?
Sierra Wireless EM7565 Qualcomm® Snapdragon™ X16 LTE-A

AT!USBMANUFACTURER?
Sierra Wireless, Incorporated

Set vid and pid :

AT!USBVID=1199          Set usb vid of 0x1199
AT!USBPID=9091,9090     Set usb pid (app=0x9091, boot=0x9090)

Set product identifier :

AT!PRIID?               Show product identifier
    PRI Part Number: 9907344
    Revision: 002.001
    Customer: Generic-M2M
    Carrier PRI: 9999999_9907259_SWI9X50C_01.08.04.00_00_GENERIC_002.012_000


AT!USBPID="9907344","002.001","Generic-M2M"     Set PartNr, Revision and Customer

Set preferred modem image :

AT!IMPREF="GENERIC"

AT!IMAGE=?
    AT!IMAGE=<op>[,<type>[,<slot>[,"<build_id>","<unique_id>"]]]
    op   - 0:delete 1:list 2:get max num images
    type - 0:FW 1:CONFIG
    slot - FW slot index - none implies all slots
    AT!IMAGE?[<op>[,<type>]]

AT!IMAGE=0,0,1       Op=0 (Delete), Type=0 (FW), Slot Index=1

Reset to factor settings :
```
AT!RMARESET=1
```

Lenovo laptop whitelist bypass :

AT!ENTERCND="A710"
AT!CUSTOM="FASTENUMEN",2    Disable fast enumeration and only show up after init
AT!PCOFFEN=2                Ignore W_DISABLE pin
AT!USBSPEED=0               Force usb2 mode
AT!RESET

Set usb composition (diag, nmea, modem, mbim, same as USBCOMP=8):
```
AT!USBCOMP=1,3,0000100D
```
List custom settings :
```
AT!CUSTOM?
```
Enable telnet (after sending valid openlock request)
```
at!custom="TELNETENABLE",1
```
Enable adb (after sending valid openlock request, here: MC7304/AC810)
```
AT!CUSTOM="ADBENABLE", 1
```
Regulary, tcp port 5555 is used for adb
```
adb tcpip 5555
adb connect 192.168.1.1
```
Enable telnet (after sending valid openlock request, here: MR1100)
```
AT!TELEN=1
AT!CUSTOM="RDENABLE", 1
AT!CUSTOM="TELNETENABLE", 1
```
then reboot the device. Afterwards, telnet should be available on MR1100 via 192.168.1.1:23

Flash firmware :

~ > sudo apt install libqmi-glib5 libqmi-proxy libqmi-utils -y
~ > qmi-firmware-update --update -d 1199:9091 firmware.cwe firmware.nvu      1199:9091 is usb vid/pid

ToDo

Nothing :)

License

Published under GPLv3 license Additional license limitations: No use in commercial products without prior permit by me.

Enjoy !

7.0 KiB Executable File Raw Permalink Blame History