Lakka-LibreELEC/projects/Allwinner/patches/linux/0029-net-phy-Add-support-for-AC200-EPHY.patch

From cbf68fb141747879e2e6c43584c1e1e3b4d77683 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:38:57 +0200
Subject: [PATCH 39/44] net: phy: Add support for AC200 EPHY

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/net/phy/Kconfig  |   7 ++
 drivers/net/phy/Makefile |   1 +
 drivers/net/phy/ac200.c  | 234 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 242 insertions(+)
 create mode 100644 drivers/net/phy/ac200.c

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -63,6 +63,13 @@ config SFP
 
 comment "MII PHY device drivers"
 
+config AC200_PHY
+	tristate "AC200 EPHY"
+	depends on NVMEM
+	depends on OF
+	help
+	  Fast ethernet PHY as found in X-Powers AC200 multi-function device.
+
 config AMD_PHY
 	tristate "AMD PHYs"
 	help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SFP)		+= sfp.o
 sfp-obj-$(CONFIG_SFP)		+= sfp-bus.o
 obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 
+obj-$(CONFIG_AC200_PHY)		+= ac200.o
 obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 aquantia-objs			+= aquantia_main.o
--- /dev/null
+++ b/drivers/net/phy/ac200.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * Driver for AC200 Ethernet PHY
+ *
+ * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/ac200.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define AC200_EPHY_ID			0x00441400
+#define AC200_EPHY_ID_MASK		0x0ffffff0
+
+/* macros for system ephy control 0 register */
+#define AC200_EPHY_RESET_INVALID	BIT(0)
+#define AC200_EPHY_SYSCLK_GATING	BIT(1)
+
+/* macros for system ephy control 1 register */
+#define AC200_EPHY_E_EPHY_MII_IO_EN	BIT(0)
+#define AC200_EPHY_E_LNK_LED_IO_EN	BIT(1)
+#define AC200_EPHY_E_SPD_LED_IO_EN	BIT(2)
+#define AC200_EPHY_E_DPX_LED_IO_EN	BIT(3)
+
+/* macros for ephy control register */
+#define AC200_EPHY_SHUTDOWN		BIT(0)
+#define AC200_EPHY_LED_POL		BIT(1)
+#define AC200_EPHY_CLK_SEL		BIT(2)
+#define AC200_EPHY_ADDR(x)		(((x) & 0x1F) << 4)
+#define AC200_EPHY_XMII_SEL		BIT(11)
+#define AC200_EPHY_CALIB(x)		(((x) & 0xF) << 12)
+
+struct ac200_ephy_dev {
+	struct phy_driver	*ephy;
+	struct regmap		*regmap;
+};
+
+static char *ac200_phy_name = "AC200 EPHY";
+
+static void disable_intelligent_ieee(struct phy_device *phydev)
+{
+	unsigned int value;
+
+	phy_write(phydev, 0x1f, 0x0100);	/* switch to page 1 */
+	value = phy_read(phydev, 0x17);
+	value &= ~BIT(3);			/* disable IEEE */
+	phy_write(phydev, 0x17, value);
+	phy_write(phydev, 0x1f, 0x0000);	/* switch to page 0 */
+}
+
+static void disable_802_3az_ieee(struct phy_device *phydev)
+{
+	unsigned int value;
+
+	phy_write(phydev, 0xd, 0x7);
+	phy_write(phydev, 0xe, 0x3c);
+	phy_write(phydev, 0xd, BIT(14) | 0x7);
+	value = phy_read(phydev, 0xe);
+	value &= ~BIT(1);
+	phy_write(phydev, 0xd, 0x7);
+	phy_write(phydev, 0xe, 0x3c);
+	phy_write(phydev, 0xd, BIT(14) | 0x7);
+	phy_write(phydev, 0xe, value);
+
+	phy_write(phydev, 0x1f, 0x0200);	/* switch to page 2 */
+	phy_write(phydev, 0x18, 0x0000);
+}
+
+static int ac200_ephy_config_init(struct phy_device *phydev)
+{
+	const struct ac200_ephy_dev *priv = phydev->drv->driver_data;
+	unsigned int value;
+	int ret;
+
+	phy_write(phydev, 0x1f, 0x0100);	/* Switch to Page 1 */
+	phy_write(phydev, 0x12, 0x4824);	/* Disable APS */
+
+	phy_write(phydev, 0x1f, 0x0200);	/* Switch to Page 2 */
+	phy_write(phydev, 0x18, 0x0000);	/* PHYAFE TRX optimization */
+
+	phy_write(phydev, 0x1f, 0x0600);	/* Switch to Page 6 */
+	phy_write(phydev, 0x14, 0x708f);	/* PHYAFE TX optimization */
+	phy_write(phydev, 0x13, 0xF000);	/* PHYAFE RX optimization */
+	phy_write(phydev, 0x15, 0x1530);
+
+	phy_write(phydev, 0x1f, 0x0800);	/* Switch to Page 6 */
+	phy_write(phydev, 0x18, 0x00bc);	/* PHYAFE TRX optimization */
+
+	disable_intelligent_ieee(phydev);	/* Disable Intelligent IEEE */
+	disable_802_3az_ieee(phydev);		/* Disable 802.3az IEEE */
+	phy_write(phydev, 0x1f, 0x0000);	/* Switch to Page 0 */
+
+	value = (phydev->interface == PHY_INTERFACE_MODE_RMII) ?
+		AC200_EPHY_XMII_SEL : 0;
+	ret = regmap_update_bits(priv->regmap, AC200_EPHY_CTL,
+				 AC200_EPHY_XMII_SEL, value);
+	if (ret)
+		return ret;
+
+	/* FIXME: This is probably H6 specific */
+	value = phy_read(phydev, 0x13);
+	value |= BIT(12);
+	phy_write(phydev, 0x13, value);
+
+	return 0;
+}
+
+static const struct mdio_device_id __maybe_unused ac200_ephy_phy_tbl[] = {
+	{ AC200_EPHY_ID, AC200_EPHY_ID_MASK },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(mdio, ac200_ephy_phy_tbl);
+
+static int ac200_ephy_probe(struct platform_device *pdev)
+{
+	struct ac200_dev *ac200 = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct ac200_ephy_dev *priv;
+	struct nvmem_cell *calcell;
+	struct phy_driver *ephy;
+	u16 *caldata, calib;
+	size_t callen;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ephy = devm_kzalloc(dev, sizeof(*ephy), GFP_KERNEL);
+	if (!ephy)
+		return -ENOMEM;
+
+	calcell = devm_nvmem_cell_get(dev, "ephy_calib");
+	if (IS_ERR(calcell)) {
+		dev_err(dev, "Unable to find calibration data!\n");
+		return PTR_ERR(calcell);
+	}
+
+	caldata = nvmem_cell_read(calcell, &callen);
+	if (IS_ERR(caldata)) {
+		dev_err(dev, "Unable to read calibration data!\n");
+		return PTR_ERR(caldata);
+	}
+
+	if (callen != 2) {
+		dev_err(dev, "Calibration data has wrong length: 2 != %lu\n",
+			callen);
+		kfree(caldata);
+		return -EINVAL;
+	}
+
+	calib = *caldata + 3;
+	kfree(caldata);
+
+	ephy->phy_id = AC200_EPHY_ID;
+	ephy->phy_id_mask = AC200_EPHY_ID_MASK;
+	ephy->name = ac200_phy_name;
+	ephy->driver_data = priv;
+	ephy->soft_reset = genphy_soft_reset;
+	ephy->config_init = ac200_ephy_config_init;
+	ephy->suspend = genphy_suspend;
+	ephy->resume = genphy_resume;
+
+	priv->ephy = ephy;
+	priv->regmap = ac200->regmap;
+	platform_set_drvdata(pdev, priv);
+
+	ret = regmap_write(ac200->regmap, AC200_SYS_EPHY_CTL0,
+			   AC200_EPHY_RESET_INVALID |
+			   AC200_EPHY_SYSCLK_GATING);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(ac200->regmap, AC200_SYS_EPHY_CTL1,
+			   AC200_EPHY_E_EPHY_MII_IO_EN |
+			   AC200_EPHY_E_LNK_LED_IO_EN |
+			   AC200_EPHY_E_SPD_LED_IO_EN |
+			   AC200_EPHY_E_DPX_LED_IO_EN);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(ac200->regmap, AC200_EPHY_CTL,
+			   AC200_EPHY_LED_POL |
+			   AC200_EPHY_CLK_SEL |
+			   AC200_EPHY_ADDR(1) |
+			   AC200_EPHY_CALIB(calib));
+	if (ret)
+		return ret;
+
+	ret = phy_driver_register(priv->ephy, THIS_MODULE);
+	if (ret) {
+		dev_err(dev, "Unable to register phy\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ac200_ephy_remove(struct platform_device *pdev)
+{
+	struct ac200_ephy_dev *priv = platform_get_drvdata(pdev);
+
+	phy_driver_unregister(priv->ephy);
+
+	regmap_write(priv->regmap, AC200_EPHY_CTL, AC200_EPHY_SHUTDOWN);
+	regmap_write(priv->regmap, AC200_SYS_EPHY_CTL1, 0);
+	regmap_write(priv->regmap, AC200_SYS_EPHY_CTL0, 0);
+
+	return 0;
+}
+
+static const struct of_device_id ac200_ephy_match[] = {
+	{ .compatible = "x-powers,ac200-ephy" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ac200_ephy_match);
+
+static struct platform_driver ac200_ephy_driver = {
+	.probe		= ac200_ephy_probe,
+	.remove		= ac200_ephy_remove,
+	.driver		= {
+		.name		= "ac200-ephy",
+		.of_match_table	= ac200_ephy_match,
+	},
+};
+module_platform_driver(ac200_ephy_driver);
+
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>");
+MODULE_DESCRIPTION("AC200 Ethernet PHY driver");
+MODULE_LICENSE("GPL");