mirror of
https://github.com/physwizz/a155-U-u1.git
synced 2024-11-19 13:27:49 +00:00
498 lines
12 KiB
C
498 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2017,2018 NXP
|
|
* Copyright 2019 Purism SPC
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* DPHY registers */
|
|
#define DPHY_PD_DPHY 0x00
|
|
#define DPHY_M_PRG_HS_PREPARE 0x04
|
|
#define DPHY_MC_PRG_HS_PREPARE 0x08
|
|
#define DPHY_M_PRG_HS_ZERO 0x0c
|
|
#define DPHY_MC_PRG_HS_ZERO 0x10
|
|
#define DPHY_M_PRG_HS_TRAIL 0x14
|
|
#define DPHY_MC_PRG_HS_TRAIL 0x18
|
|
#define DPHY_PD_PLL 0x1c
|
|
#define DPHY_TST 0x20
|
|
#define DPHY_CN 0x24
|
|
#define DPHY_CM 0x28
|
|
#define DPHY_CO 0x2c
|
|
#define DPHY_LOCK 0x30
|
|
#define DPHY_LOCK_BYP 0x34
|
|
#define DPHY_REG_BYPASS_PLL 0x4C
|
|
|
|
#define MBPS(x) ((x) * 1000000)
|
|
|
|
#define DATA_RATE_MAX_SPEED MBPS(1500)
|
|
#define DATA_RATE_MIN_SPEED MBPS(80)
|
|
|
|
#define PLL_LOCK_SLEEP 10
|
|
#define PLL_LOCK_TIMEOUT 1000
|
|
|
|
#define CN_BUF 0xcb7a89c0
|
|
#define CO_BUF 0x63
|
|
#define CM(x) ( \
|
|
((x) < 32) ? 0xe0 | ((x) - 16) : \
|
|
((x) < 64) ? 0xc0 | ((x) - 32) : \
|
|
((x) < 128) ? 0x80 | ((x) - 64) : \
|
|
((x) - 128))
|
|
#define CN(x) (((x) == 1) ? 0x1f : (((CN_BUF) >> ((x) - 1)) & 0x1f))
|
|
#define CO(x) ((CO_BUF) >> (8 - (x)) & 0x03)
|
|
|
|
/* PHY power on is active low */
|
|
#define PWR_ON 0
|
|
#define PWR_OFF 1
|
|
|
|
enum mixel_dphy_devtype {
|
|
MIXEL_IMX8MQ,
|
|
};
|
|
|
|
struct mixel_dphy_devdata {
|
|
u8 reg_tx_rcal;
|
|
u8 reg_auto_pd_en;
|
|
u8 reg_rxlprp;
|
|
u8 reg_rxcdrp;
|
|
u8 reg_rxhs_settle;
|
|
};
|
|
|
|
static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
|
|
[MIXEL_IMX8MQ] = {
|
|
.reg_tx_rcal = 0x38,
|
|
.reg_auto_pd_en = 0x3c,
|
|
.reg_rxlprp = 0x40,
|
|
.reg_rxcdrp = 0x44,
|
|
.reg_rxhs_settle = 0x48,
|
|
},
|
|
};
|
|
|
|
struct mixel_dphy_cfg {
|
|
/* DPHY PLL parameters */
|
|
u32 cm;
|
|
u32 cn;
|
|
u32 co;
|
|
/* DPHY register values */
|
|
u8 mc_prg_hs_prepare;
|
|
u8 m_prg_hs_prepare;
|
|
u8 mc_prg_hs_zero;
|
|
u8 m_prg_hs_zero;
|
|
u8 mc_prg_hs_trail;
|
|
u8 m_prg_hs_trail;
|
|
u8 rxhs_settle;
|
|
};
|
|
|
|
struct mixel_dphy_priv {
|
|
struct mixel_dphy_cfg cfg;
|
|
struct regmap *regmap;
|
|
struct clk *phy_ref_clk;
|
|
const struct mixel_dphy_devdata *devdata;
|
|
};
|
|
|
|
static const struct regmap_config mixel_dphy_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = DPHY_REG_BYPASS_PLL,
|
|
.name = "mipi-dphy",
|
|
};
|
|
|
|
static int phy_write(struct phy *phy, u32 value, unsigned int reg)
|
|
{
|
|
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
ret = regmap_write(priv->regmap, reg, value);
|
|
if (ret < 0)
|
|
dev_err(&phy->dev, "Failed to write DPHY reg %d: %d\n", reg,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Find a ratio close to the desired one using continued fraction
|
|
* approximation ending either at exact match or maximum allowed
|
|
* nominator, denominator.
|
|
*/
|
|
static void get_best_ratio(u32 *pnum, u32 *pdenom, u32 max_n, u32 max_d)
|
|
{
|
|
u32 a = *pnum;
|
|
u32 b = *pdenom;
|
|
u32 c;
|
|
u32 n[] = {0, 1};
|
|
u32 d[] = {1, 0};
|
|
u32 whole;
|
|
unsigned int i = 1;
|
|
|
|
while (b) {
|
|
i ^= 1;
|
|
whole = a / b;
|
|
n[i] += (n[i ^ 1] * whole);
|
|
d[i] += (d[i ^ 1] * whole);
|
|
if ((n[i] > max_n) || (d[i] > max_d)) {
|
|
i ^= 1;
|
|
break;
|
|
}
|
|
c = a - (b * whole);
|
|
a = b;
|
|
b = c;
|
|
}
|
|
*pnum = n[i];
|
|
*pdenom = d[i];
|
|
}
|
|
|
|
static int mixel_dphy_config_from_opts(struct phy *phy,
|
|
struct phy_configure_opts_mipi_dphy *dphy_opts,
|
|
struct mixel_dphy_cfg *cfg)
|
|
{
|
|
struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
|
|
unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk);
|
|
u32 lp_t, numerator, denominator;
|
|
unsigned long long tmp;
|
|
u32 n;
|
|
int i;
|
|
|
|
if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED ||
|
|
dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED)
|
|
return -EINVAL;
|
|
|
|
numerator = dphy_opts->hs_clk_rate;
|
|
denominator = ref_clk;
|
|
get_best_ratio(&numerator, &denominator, 255, 256);
|
|
if (!numerator || !denominator) {
|
|
dev_err(&phy->dev, "Invalid %d/%d for %ld/%ld\n",
|
|
numerator, denominator,
|
|
dphy_opts->hs_clk_rate, ref_clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
while ((numerator < 16) && (denominator <= 128)) {
|
|
numerator <<= 1;
|
|
denominator <<= 1;
|
|
}
|
|
/*
|
|
* CM ranges between 16 and 255
|
|
* CN ranges between 1 and 32
|
|
* CO is power of 2: 1, 2, 4, 8
|
|
*/
|
|
i = __ffs(denominator);
|
|
if (i > 3)
|
|
i = 3;
|
|
cfg->cn = denominator >> i;
|
|
cfg->co = 1 << i;
|
|
cfg->cm = numerator;
|
|
|
|
if (cfg->cm < 16 || cfg->cm > 255 ||
|
|
cfg->cn < 1 || cfg->cn > 32 ||
|
|
cfg->co < 1 || cfg->co > 8) {
|
|
dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n",
|
|
cfg->cm, cfg->cn, cfg->co);
|
|
dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
|
|
dphy_opts->hs_clk_rate, ref_clk,
|
|
numerator, denominator);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(&phy->dev, "hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
|
|
dphy_opts->hs_clk_rate, ref_clk, numerator, denominator);
|
|
|
|
/* LP clock period */
|
|
tmp = 1000000000000LL;
|
|
do_div(tmp, dphy_opts->lp_clk_rate); /* ps */
|
|
if (tmp > ULONG_MAX)
|
|
return -EINVAL;
|
|
|
|
lp_t = tmp;
|
|
dev_dbg(&phy->dev, "LP clock %lu, period: %u ps\n",
|
|
dphy_opts->lp_clk_rate, lp_t);
|
|
|
|
/* hs_prepare: in lp clock periods */
|
|
if (2 * dphy_opts->hs_prepare > 5 * lp_t) {
|
|
dev_err(&phy->dev,
|
|
"hs_prepare (%u) > 2.5 * lp clock period (%u)\n",
|
|
dphy_opts->hs_prepare, lp_t);
|
|
return -EINVAL;
|
|
}
|
|
/* 00: lp_t, 01: 1.5 * lp_t, 10: 2 * lp_t, 11: 2.5 * lp_t */
|
|
if (dphy_opts->hs_prepare < lp_t) {
|
|
n = 0;
|
|
} else {
|
|
tmp = 2 * (dphy_opts->hs_prepare - lp_t);
|
|
do_div(tmp, lp_t);
|
|
n = tmp;
|
|
}
|
|
cfg->m_prg_hs_prepare = n;
|
|
|
|
/* clk_prepare: in lp clock periods */
|
|
if (2 * dphy_opts->clk_prepare > 3 * lp_t) {
|
|
dev_err(&phy->dev,
|
|
"clk_prepare (%u) > 1.5 * lp clock period (%u)\n",
|
|
dphy_opts->clk_prepare, lp_t);
|
|
return -EINVAL;
|
|
}
|
|
/* 00: lp_t, 01: 1.5 * lp_t */
|
|
cfg->mc_prg_hs_prepare = dphy_opts->clk_prepare > lp_t ? 1 : 0;
|
|
|
|
/* hs_zero: formula from NXP BSP */
|
|
n = (144 * (dphy_opts->hs_clk_rate / 1000000) - 47500) / 10000;
|
|
cfg->m_prg_hs_zero = n < 1 ? 1 : n;
|
|
|
|
/* clk_zero: formula from NXP BSP */
|
|
n = (34 * (dphy_opts->hs_clk_rate / 1000000) - 2500) / 1000;
|
|
cfg->mc_prg_hs_zero = n < 1 ? 1 : n;
|
|
|
|
/* clk_trail, hs_trail: formula from NXP BSP */
|
|
n = (103 * (dphy_opts->hs_clk_rate / 1000000) + 10000) / 10000;
|
|
if (n > 15)
|
|
n = 15;
|
|
if (n < 1)
|
|
n = 1;
|
|
cfg->m_prg_hs_trail = n;
|
|
cfg->mc_prg_hs_trail = n;
|
|
|
|
/* rxhs_settle: formula from NXP BSP */
|
|
if (dphy_opts->hs_clk_rate < MBPS(80))
|
|
cfg->rxhs_settle = 0x0d;
|
|
else if (dphy_opts->hs_clk_rate < MBPS(90))
|
|
cfg->rxhs_settle = 0x0c;
|
|
else if (dphy_opts->hs_clk_rate < MBPS(125))
|
|
cfg->rxhs_settle = 0x0b;
|
|
else if (dphy_opts->hs_clk_rate < MBPS(150))
|
|
cfg->rxhs_settle = 0x0a;
|
|
else if (dphy_opts->hs_clk_rate < MBPS(225))
|
|
cfg->rxhs_settle = 0x09;
|
|
else if (dphy_opts->hs_clk_rate < MBPS(500))
|
|
cfg->rxhs_settle = 0x08;
|
|
else
|
|
cfg->rxhs_settle = 0x07;
|
|
|
|
dev_dbg(&phy->dev, "phy_config: %u %u %u %u %u %u %u\n",
|
|
cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare,
|
|
cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero,
|
|
cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail,
|
|
cfg->rxhs_settle);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mixel_phy_set_hs_timings(struct phy *phy)
|
|
{
|
|
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE);
|
|
phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE);
|
|
phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO);
|
|
phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO);
|
|
phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL);
|
|
phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL);
|
|
phy_write(phy, priv->cfg.rxhs_settle, priv->devdata->reg_rxhs_settle);
|
|
}
|
|
|
|
static int mixel_dphy_set_pll_params(struct phy *phy)
|
|
{
|
|
struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
|
|
|
|
if (priv->cfg.cm < 16 || priv->cfg.cm > 255 ||
|
|
priv->cfg.cn < 1 || priv->cfg.cn > 32 ||
|
|
priv->cfg.co < 1 || priv->cfg.co > 8) {
|
|
dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n",
|
|
priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
|
|
return -EINVAL;
|
|
}
|
|
dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
|
|
priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
|
|
phy_write(phy, CM(priv->cfg.cm), DPHY_CM);
|
|
phy_write(phy, CN(priv->cfg.cn), DPHY_CN);
|
|
phy_write(phy, CO(priv->cfg.co), DPHY_CO);
|
|
return 0;
|
|
}
|
|
|
|
static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
|
|
{
|
|
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
|
|
struct mixel_dphy_cfg cfg = { 0 };
|
|
int ret;
|
|
|
|
ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Update the configuration */
|
|
memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg));
|
|
|
|
phy_write(phy, 0x00, DPHY_LOCK_BYP);
|
|
phy_write(phy, 0x01, priv->devdata->reg_tx_rcal);
|
|
phy_write(phy, 0x00, priv->devdata->reg_auto_pd_en);
|
|
phy_write(phy, 0x02, priv->devdata->reg_rxlprp);
|
|
phy_write(phy, 0x02, priv->devdata->reg_rxcdrp);
|
|
phy_write(phy, 0x25, DPHY_TST);
|
|
|
|
mixel_phy_set_hs_timings(phy);
|
|
ret = mixel_dphy_set_pll_params(phy);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
|
|
union phy_configure_opts *opts)
|
|
{
|
|
struct mixel_dphy_cfg cfg = { 0 };
|
|
|
|
if (mode != PHY_MODE_MIPI_DPHY)
|
|
return -EINVAL;
|
|
|
|
return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
|
|
}
|
|
|
|
static int mixel_dphy_init(struct phy *phy)
|
|
{
|
|
phy_write(phy, PWR_OFF, DPHY_PD_PLL);
|
|
phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mixel_dphy_exit(struct phy *phy)
|
|
{
|
|
phy_write(phy, 0, DPHY_CM);
|
|
phy_write(phy, 0, DPHY_CN);
|
|
phy_write(phy, 0, DPHY_CO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mixel_dphy_power_on(struct phy *phy)
|
|
{
|
|
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
|
|
u32 locked;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(priv->phy_ref_clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
phy_write(phy, PWR_ON, DPHY_PD_PLL);
|
|
ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
|
|
locked, PLL_LOCK_SLEEP,
|
|
PLL_LOCK_TIMEOUT);
|
|
if (ret < 0) {
|
|
dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret);
|
|
goto clock_disable;
|
|
}
|
|
phy_write(phy, PWR_ON, DPHY_PD_DPHY);
|
|
|
|
return 0;
|
|
clock_disable:
|
|
clk_disable_unprepare(priv->phy_ref_clk);
|
|
return ret;
|
|
}
|
|
|
|
static int mixel_dphy_power_off(struct phy *phy)
|
|
{
|
|
struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
|
|
|
|
phy_write(phy, PWR_OFF, DPHY_PD_PLL);
|
|
phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
|
|
|
|
clk_disable_unprepare(priv->phy_ref_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops mixel_dphy_phy_ops = {
|
|
.init = mixel_dphy_init,
|
|
.exit = mixel_dphy_exit,
|
|
.power_on = mixel_dphy_power_on,
|
|
.power_off = mixel_dphy_power_off,
|
|
.configure = mixel_dphy_configure,
|
|
.validate = mixel_dphy_validate,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id mixel_dphy_of_match[] = {
|
|
{ .compatible = "fsl,imx8mq-mipi-dphy",
|
|
.data = &mixel_dphy_devdata[MIXEL_IMX8MQ] },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
|
|
|
|
static int mixel_dphy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct phy_provider *phy_provider;
|
|
struct mixel_dphy_priv *priv;
|
|
struct resource *res;
|
|
struct phy *phy;
|
|
void __iomem *base;
|
|
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->devdata = of_device_get_match_data(&pdev->dev);
|
|
if (!priv->devdata)
|
|
return -EINVAL;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
|
|
&mixel_dphy_regmap_config);
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_err(dev, "Couldn't create the DPHY regmap\n");
|
|
return PTR_ERR(priv->regmap);
|
|
}
|
|
|
|
priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref");
|
|
if (IS_ERR(priv->phy_ref_clk)) {
|
|
dev_err(dev, "No phy_ref clock found\n");
|
|
return PTR_ERR(priv->phy_ref_clk);
|
|
}
|
|
dev_dbg(dev, "phy_ref clock rate: %lu\n",
|
|
clk_get_rate(priv->phy_ref_clk));
|
|
|
|
dev_set_drvdata(dev, priv);
|
|
|
|
phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
|
|
return PTR_ERR(phy);
|
|
}
|
|
phy_set_drvdata(phy, priv);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static struct platform_driver mixel_dphy_driver = {
|
|
.probe = mixel_dphy_probe,
|
|
.driver = {
|
|
.name = "mixel-mipi-dphy",
|
|
.of_match_table = mixel_dphy_of_match,
|
|
}
|
|
};
|
|
module_platform_driver(mixel_dphy_driver);
|
|
|
|
MODULE_AUTHOR("NXP Semiconductor");
|
|
MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver");
|
|
MODULE_LICENSE("GPL");
|