mirror of
				https://github.com/physwizz/a155-U-u1.git
				synced 2025-10-28 16:15:46 +00:00 
			
		
		
		
	
		
			
				
	
	
		
			568 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			568 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0
 | 
						|
/*
 | 
						|
 * I2C multiplexer
 | 
						|
 *
 | 
						|
 * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
 | 
						|
 * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
 | 
						|
 *
 | 
						|
 * This module supports the PCA954x and PCA984x series of I2C multiplexer/switch
 | 
						|
 * chips made by NXP Semiconductors.
 | 
						|
 * This includes the:
 | 
						|
 *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547,
 | 
						|
 *	 PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849.
 | 
						|
 *
 | 
						|
 * These chips are all controlled via the I2C bus itself, and all have a
 | 
						|
 * single 8-bit register. The upstream "parent" bus fans out to two,
 | 
						|
 * four, or eight downstream busses or channels; which of these
 | 
						|
 * are selected is determined by the chip type and register contents. A
 | 
						|
 * mux can select only one sub-bus at a time; a switch can select any
 | 
						|
 * combination simultaneously.
 | 
						|
 *
 | 
						|
 * Based on:
 | 
						|
 *	pca954x.c from Kumar Gala <galak@kernel.crashing.org>
 | 
						|
 * Copyright (C) 2006
 | 
						|
 *
 | 
						|
 * Based on:
 | 
						|
 *	pca954x.c from Ken Harrenstien
 | 
						|
 * Copyright (C) 2004 Google, Inc. (Ken Harrenstien)
 | 
						|
 *
 | 
						|
 * Based on:
 | 
						|
 *	i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com>
 | 
						|
 * and
 | 
						|
 *	pca9540.c from Jean Delvare <jdelvare@suse.de>.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/device.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/i2c-mux.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/irq.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/pm.h>
 | 
						|
#include <linux/property.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/spinlock.h>
 | 
						|
#include <dt-bindings/mux/mux.h>
 | 
						|
 | 
						|
#define PCA954X_MAX_NCHANS 8
 | 
						|
 | 
						|
#define PCA954X_IRQ_OFFSET 4
 | 
						|
 | 
						|
enum pca_type {
 | 
						|
	pca_9540,
 | 
						|
	pca_9542,
 | 
						|
	pca_9543,
 | 
						|
	pca_9544,
 | 
						|
	pca_9545,
 | 
						|
	pca_9546,
 | 
						|
	pca_9547,
 | 
						|
	pca_9548,
 | 
						|
	pca_9846,
 | 
						|
	pca_9847,
 | 
						|
	pca_9848,
 | 
						|
	pca_9849,
 | 
						|
};
 | 
						|
 | 
						|
struct chip_desc {
 | 
						|
	u8 nchans;
 | 
						|
	u8 enable;	/* used for muxes only */
 | 
						|
	u8 has_irq;
 | 
						|
	enum muxtype {
 | 
						|
		pca954x_ismux = 0,
 | 
						|
		pca954x_isswi
 | 
						|
	} muxtype;
 | 
						|
	struct i2c_device_identity id;
 | 
						|
};
 | 
						|
 | 
						|
struct pca954x {
 | 
						|
	const struct chip_desc *chip;
 | 
						|
 | 
						|
	u8 last_chan;		/* last register value */
 | 
						|
	/* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */
 | 
						|
	s32 idle_state;
 | 
						|
 | 
						|
	struct i2c_client *client;
 | 
						|
 | 
						|
	struct irq_domain *irq;
 | 
						|
	unsigned int irq_mask;
 | 
						|
	raw_spinlock_t lock;
 | 
						|
};
 | 
						|
 | 
						|
/* Provide specs for the PCA954x types we know about */
 | 
						|
static const struct chip_desc chips[] = {
 | 
						|
	[pca_9540] = {
 | 
						|
		.nchans = 2,
 | 
						|
		.enable = 0x4,
 | 
						|
		.muxtype = pca954x_ismux,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9542] = {
 | 
						|
		.nchans = 2,
 | 
						|
		.enable = 0x4,
 | 
						|
		.has_irq = 1,
 | 
						|
		.muxtype = pca954x_ismux,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9543] = {
 | 
						|
		.nchans = 2,
 | 
						|
		.has_irq = 1,
 | 
						|
		.muxtype = pca954x_isswi,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9544] = {
 | 
						|
		.nchans = 4,
 | 
						|
		.enable = 0x4,
 | 
						|
		.has_irq = 1,
 | 
						|
		.muxtype = pca954x_ismux,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9545] = {
 | 
						|
		.nchans = 4,
 | 
						|
		.has_irq = 1,
 | 
						|
		.muxtype = pca954x_isswi,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9546] = {
 | 
						|
		.nchans = 4,
 | 
						|
		.muxtype = pca954x_isswi,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9547] = {
 | 
						|
		.nchans = 8,
 | 
						|
		.enable = 0x8,
 | 
						|
		.muxtype = pca954x_ismux,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9548] = {
 | 
						|
		.nchans = 8,
 | 
						|
		.muxtype = pca954x_isswi,
 | 
						|
		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 | 
						|
	},
 | 
						|
	[pca_9846] = {
 | 
						|
		.nchans = 4,
 | 
						|
		.muxtype = pca954x_isswi,
 | 
						|
		.id = {
 | 
						|
			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
 | 
						|
			.part_id = 0x10b,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[pca_9847] = {
 | 
						|
		.nchans = 8,
 | 
						|
		.enable = 0x8,
 | 
						|
		.muxtype = pca954x_ismux,
 | 
						|
		.id = {
 | 
						|
			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
 | 
						|
			.part_id = 0x108,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[pca_9848] = {
 | 
						|
		.nchans = 8,
 | 
						|
		.muxtype = pca954x_isswi,
 | 
						|
		.id = {
 | 
						|
			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
 | 
						|
			.part_id = 0x10a,
 | 
						|
		},
 | 
						|
	},
 | 
						|
	[pca_9849] = {
 | 
						|
		.nchans = 4,
 | 
						|
		.enable = 0x4,
 | 
						|
		.muxtype = pca954x_ismux,
 | 
						|
		.id = {
 | 
						|
			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
 | 
						|
			.part_id = 0x109,
 | 
						|
		},
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static const struct i2c_device_id pca954x_id[] = {
 | 
						|
	{ "pca9540", pca_9540 },
 | 
						|
	{ "pca9542", pca_9542 },
 | 
						|
	{ "pca9543", pca_9543 },
 | 
						|
	{ "pca9544", pca_9544 },
 | 
						|
	{ "pca9545", pca_9545 },
 | 
						|
	{ "pca9546", pca_9546 },
 | 
						|
	{ "pca9547", pca_9547 },
 | 
						|
	{ "pca9548", pca_9548 },
 | 
						|
	{ "pca9846", pca_9846 },
 | 
						|
	{ "pca9847", pca_9847 },
 | 
						|
	{ "pca9848", pca_9848 },
 | 
						|
	{ "pca9849", pca_9849 },
 | 
						|
	{ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(i2c, pca954x_id);
 | 
						|
 | 
						|
static const struct of_device_id pca954x_of_match[] = {
 | 
						|
	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
 | 
						|
	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
 | 
						|
	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
 | 
						|
	{ .compatible = "nxp,pca9544", .data = &chips[pca_9544] },
 | 
						|
	{ .compatible = "nxp,pca9545", .data = &chips[pca_9545] },
 | 
						|
	{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
 | 
						|
	{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
 | 
						|
	{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
 | 
						|
	{ .compatible = "nxp,pca9846", .data = &chips[pca_9846] },
 | 
						|
	{ .compatible = "nxp,pca9847", .data = &chips[pca_9847] },
 | 
						|
	{ .compatible = "nxp,pca9848", .data = &chips[pca_9848] },
 | 
						|
	{ .compatible = "nxp,pca9849", .data = &chips[pca_9849] },
 | 
						|
	{}
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, pca954x_of_match);
 | 
						|
 | 
						|
/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
 | 
						|
   for this as they will try to lock adapter a second time */
 | 
						|
static int pca954x_reg_write(struct i2c_adapter *adap,
 | 
						|
			     struct i2c_client *client, u8 val)
 | 
						|
{
 | 
						|
	union i2c_smbus_data dummy;
 | 
						|
 | 
						|
	return __i2c_smbus_xfer(adap, client->addr, client->flags,
 | 
						|
				I2C_SMBUS_WRITE, val,
 | 
						|
				I2C_SMBUS_BYTE, &dummy);
 | 
						|
}
 | 
						|
 | 
						|
static u8 pca954x_regval(struct pca954x *data, u8 chan)
 | 
						|
{
 | 
						|
	/* We make switches look like muxes, not sure how to be smarter. */
 | 
						|
	if (data->chip->muxtype == pca954x_ismux)
 | 
						|
		return chan | data->chip->enable;
 | 
						|
	else
 | 
						|
		return 1 << chan;
 | 
						|
}
 | 
						|
 | 
						|
static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
 | 
						|
{
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
	struct i2c_client *client = data->client;
 | 
						|
	u8 regval;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	regval = pca954x_regval(data, chan);
 | 
						|
	/* Only select the channel if its different from the last channel */
 | 
						|
	if (data->last_chan != regval) {
 | 
						|
		ret = pca954x_reg_write(muxc->parent, client, regval);
 | 
						|
		data->last_chan = ret < 0 ? 0 : regval;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
 | 
						|
{
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
	struct i2c_client *client = data->client;
 | 
						|
	s32 idle_state;
 | 
						|
 | 
						|
	idle_state = READ_ONCE(data->idle_state);
 | 
						|
	if (idle_state >= 0)
 | 
						|
		/* Set the mux back to a predetermined channel */
 | 
						|
		return pca954x_select_chan(muxc, idle_state);
 | 
						|
 | 
						|
	if (idle_state == MUX_IDLE_DISCONNECT) {
 | 
						|
		/* Deselect active channel */
 | 
						|
		data->last_chan = 0;
 | 
						|
		return pca954x_reg_write(muxc->parent, client,
 | 
						|
					 data->last_chan);
 | 
						|
	}
 | 
						|
 | 
						|
	/* otherwise leave as-is */
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t idle_state_show(struct device *dev,
 | 
						|
				    struct device_attribute *attr,
 | 
						|
				    char *buf)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
 | 
						|
	return sprintf(buf, "%d\n", READ_ONCE(data->idle_state));
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t idle_state_store(struct device *dev,
 | 
						|
				struct device_attribute *attr,
 | 
						|
				const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
	int val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = kstrtoint(buf, 0, &val);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (val != MUX_IDLE_AS_IS && val != MUX_IDLE_DISCONNECT &&
 | 
						|
	    (val < 0 || val >= data->chip->nchans))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	i2c_lock_bus(muxc->parent, I2C_LOCK_SEGMENT);
 | 
						|
 | 
						|
	WRITE_ONCE(data->idle_state, val);
 | 
						|
	/*
 | 
						|
	 * Set the mux into a state consistent with the new
 | 
						|
	 * idle_state.
 | 
						|
	 */
 | 
						|
	if (data->last_chan || val != MUX_IDLE_DISCONNECT)
 | 
						|
		ret = pca954x_deselect_mux(muxc, 0);
 | 
						|
 | 
						|
	i2c_unlock_bus(muxc->parent, I2C_LOCK_SEGMENT);
 | 
						|
 | 
						|
	return ret < 0 ? ret : count;
 | 
						|
}
 | 
						|
 | 
						|
static DEVICE_ATTR_RW(idle_state);
 | 
						|
 | 
						|
static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct pca954x *data = dev_id;
 | 
						|
	unsigned long pending;
 | 
						|
	int ret, i;
 | 
						|
 | 
						|
	ret = i2c_smbus_read_byte(data->client);
 | 
						|
	if (ret < 0)
 | 
						|
		return IRQ_NONE;
 | 
						|
 | 
						|
	pending = (ret >> PCA954X_IRQ_OFFSET) & (BIT(data->chip->nchans) - 1);
 | 
						|
	for_each_set_bit(i, &pending, data->chip->nchans)
 | 
						|
		handle_nested_irq(irq_linear_revmap(data->irq, i));
 | 
						|
 | 
						|
	return IRQ_RETVAL(pending);
 | 
						|
}
 | 
						|
 | 
						|
static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
 | 
						|
{
 | 
						|
	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
 | 
						|
		return -EINVAL;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct irq_chip pca954x_irq_chip = {
 | 
						|
	.name = "i2c-mux-pca954x",
 | 
						|
	.irq_set_type = pca954x_irq_set_type,
 | 
						|
};
 | 
						|
 | 
						|
static int pca954x_irq_setup(struct i2c_mux_core *muxc)
 | 
						|
{
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
	struct i2c_client *client = data->client;
 | 
						|
	int c, irq;
 | 
						|
 | 
						|
	if (!data->chip->has_irq || client->irq <= 0)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	raw_spin_lock_init(&data->lock);
 | 
						|
 | 
						|
	data->irq = irq_domain_add_linear(client->dev.of_node,
 | 
						|
					  data->chip->nchans,
 | 
						|
					  &irq_domain_simple_ops, data);
 | 
						|
	if (!data->irq)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	for (c = 0; c < data->chip->nchans; c++) {
 | 
						|
		irq = irq_create_mapping(data->irq, c);
 | 
						|
		if (!irq) {
 | 
						|
			dev_err(&client->dev, "failed irq create map\n");
 | 
						|
			return -EINVAL;
 | 
						|
		}
 | 
						|
		irq_set_chip_data(irq, data);
 | 
						|
		irq_set_chip_and_handler(irq, &pca954x_irq_chip,
 | 
						|
			handle_simple_irq);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void pca954x_cleanup(struct i2c_mux_core *muxc)
 | 
						|
{
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
	int c, irq;
 | 
						|
 | 
						|
	if (data->irq) {
 | 
						|
		for (c = 0; c < data->chip->nchans; c++) {
 | 
						|
			irq = irq_find_mapping(data->irq, c);
 | 
						|
			irq_dispose_mapping(irq);
 | 
						|
		}
 | 
						|
		irq_domain_remove(data->irq);
 | 
						|
	}
 | 
						|
	i2c_mux_del_adapters(muxc);
 | 
						|
}
 | 
						|
 | 
						|
static int pca954x_init(struct i2c_client *client, struct pca954x *data)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (data->idle_state >= 0)
 | 
						|
		data->last_chan = pca954x_regval(data, data->idle_state);
 | 
						|
	else
 | 
						|
		data->last_chan = 0; /* Disconnect multiplexer */
 | 
						|
 | 
						|
	ret = i2c_smbus_write_byte(client, data->last_chan);
 | 
						|
	if (ret < 0)
 | 
						|
		data->last_chan = 0;
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * I2C init/probing/exit functions
 | 
						|
 */
 | 
						|
static int pca954x_probe(struct i2c_client *client,
 | 
						|
			 const struct i2c_device_id *id)
 | 
						|
{
 | 
						|
	struct i2c_adapter *adap = client->adapter;
 | 
						|
	struct device *dev = &client->dev;
 | 
						|
	struct gpio_desc *gpio;
 | 
						|
	struct i2c_mux_core *muxc;
 | 
						|
	struct pca954x *data;
 | 
						|
	int num;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	muxc = i2c_mux_alloc(adap, dev, PCA954X_MAX_NCHANS, sizeof(*data), 0,
 | 
						|
			     pca954x_select_chan, pca954x_deselect_mux);
 | 
						|
	if (!muxc)
 | 
						|
		return -ENOMEM;
 | 
						|
	data = i2c_mux_priv(muxc);
 | 
						|
 | 
						|
	i2c_set_clientdata(client, muxc);
 | 
						|
	data->client = client;
 | 
						|
 | 
						|
	/* Reset the mux if a reset GPIO is specified. */
 | 
						|
	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 | 
						|
	if (IS_ERR(gpio))
 | 
						|
		return PTR_ERR(gpio);
 | 
						|
	if (gpio) {
 | 
						|
		udelay(1);
 | 
						|
		gpiod_set_value_cansleep(gpio, 0);
 | 
						|
		/* Give the chip some time to recover. */
 | 
						|
		udelay(1);
 | 
						|
	}
 | 
						|
 | 
						|
	data->chip = device_get_match_data(dev);
 | 
						|
	if (!data->chip)
 | 
						|
		data->chip = &chips[id->driver_data];
 | 
						|
 | 
						|
	if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) {
 | 
						|
		struct i2c_device_identity id;
 | 
						|
 | 
						|
		ret = i2c_get_device_id(client, &id);
 | 
						|
		if (ret && ret != -EOPNOTSUPP)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		if (!ret &&
 | 
						|
		    (id.manufacturer_id != data->chip->id.manufacturer_id ||
 | 
						|
		     id.part_id != data->chip->id.part_id)) {
 | 
						|
			dev_warn(dev, "unexpected device id %03x-%03x-%x\n",
 | 
						|
				 id.manufacturer_id, id.part_id,
 | 
						|
				 id.die_revision);
 | 
						|
			return -ENODEV;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	data->idle_state = MUX_IDLE_AS_IS;
 | 
						|
	if (device_property_read_u32(dev, "idle-state", &data->idle_state)) {
 | 
						|
		if (device_property_read_bool(dev, "i2c-mux-idle-disconnect"))
 | 
						|
			data->idle_state = MUX_IDLE_DISCONNECT;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Write the mux register at addr to verify
 | 
						|
	 * that the mux is in fact present. This also
 | 
						|
	 * initializes the mux to a channel
 | 
						|
	 * or disconnected state.
 | 
						|
	 */
 | 
						|
	ret = pca954x_init(client, data);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_warn(dev, "probe failed\n");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = pca954x_irq_setup(muxc);
 | 
						|
	if (ret)
 | 
						|
		goto fail_cleanup;
 | 
						|
 | 
						|
	/* Now create an adapter for each channel */
 | 
						|
	for (num = 0; num < data->chip->nchans; num++) {
 | 
						|
		ret = i2c_mux_add_adapter(muxc, 0, num, 0);
 | 
						|
		if (ret)
 | 
						|
			goto fail_cleanup;
 | 
						|
	}
 | 
						|
 | 
						|
	if (data->irq) {
 | 
						|
		ret = devm_request_threaded_irq(dev, data->client->irq,
 | 
						|
						NULL, pca954x_irq_handler,
 | 
						|
						IRQF_ONESHOT | IRQF_SHARED,
 | 
						|
						"pca954x", data);
 | 
						|
		if (ret)
 | 
						|
			goto fail_cleanup;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * The attr probably isn't going to be needed in most cases,
 | 
						|
	 * so don't fail completely on error.
 | 
						|
	 */
 | 
						|
	device_create_file(dev, &dev_attr_idle_state);
 | 
						|
 | 
						|
	dev_info(dev, "registered %d multiplexed busses for I2C %s %s\n",
 | 
						|
		 num, data->chip->muxtype == pca954x_ismux
 | 
						|
				? "mux" : "switch", client->name);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
fail_cleanup:
 | 
						|
	pca954x_cleanup(muxc);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int pca954x_remove(struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	device_remove_file(&client->dev, &dev_attr_idle_state);
 | 
						|
 | 
						|
	pca954x_cleanup(muxc);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM_SLEEP
 | 
						|
static int pca954x_resume(struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
 | 
						|
	struct pca954x *data = i2c_mux_priv(muxc);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = pca954x_init(client, data);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_err(&client->dev, "failed to verify mux presence\n");
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static SIMPLE_DEV_PM_OPS(pca954x_pm, NULL, pca954x_resume);
 | 
						|
 | 
						|
static struct i2c_driver pca954x_driver = {
 | 
						|
	.driver		= {
 | 
						|
		.name	= "pca954x",
 | 
						|
		.pm	= &pca954x_pm,
 | 
						|
		.of_match_table = pca954x_of_match,
 | 
						|
	},
 | 
						|
	.probe		= pca954x_probe,
 | 
						|
	.remove		= pca954x_remove,
 | 
						|
	.id_table	= pca954x_id,
 | 
						|
};
 | 
						|
 | 
						|
module_i2c_driver(pca954x_driver);
 | 
						|
 | 
						|
MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
 | 
						|
MODULE_DESCRIPTION("PCA954x I2C mux/switch driver");
 | 
						|
MODULE_LICENSE("GPL v2");
 |