libretro/Lakka-LibreELEC
1
0
Fork 1
mirror of https://github.com/libretro/Lakka-LibreELEC.git synced 2024-11-24 21:56:19 +00:00
Code Issues
Lakka-v5.x
Lakka-LibreELEC/projects/Rockchip/patches/linux/default/linux-0002-rockchip-from-list.patch
Rudi Heitbaum 3801910666 linux (Rockchip): drop upstreamed patches in 6.1.57
2023-10-14 14:31:14 +00:00

257 lines
8.6 KiB
Diff
Raw Permalink Blame History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jonas Karlman <jonas@kwiboo.se>
Date: Sat, 10 Oct 2020 15:32:19 +0000
Subject: [PATCH] phy/rockchip: inno-hdmi: remove unused no_c from rk3328
recalc_rate
no_c is not used in any calculation, lets remove it.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 15a008a1ac7b..4b936ca19920 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -714,7 +714,7 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
unsigned long frac;
- u8 nd, no_a, no_b, no_c, no_d;
+ u8 nd, no_a, no_b, no_d;
u64 vco;
u16 nf;
@@ -737,9 +737,6 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK;
no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT;
no_b += 2;
- no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK;
- no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT;
- no_c = 1 << no_c;
no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK;
do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Huicong Xu <xhc@rock-chips.com>
Date: Sat, 10 Oct 2020 15:32:20 +0000
Subject: [PATCH] phy/rockchip: inno-hdmi: force set_rate on power_on
Regular 8-bit and Deep Color video formats mainly differ in TMDS rate and
not in pixel clock rate.
When the hdmiphy clock is configured with the same pixel clock rate using
clk_set_rate() the clock framework do not signal the hdmi phy driver
to set_rate when switching between 8-bit and Deep Color.
This result in pre/post pll not being re-configured when switching between
regular 8-bit and Deep Color video formats.
Fix this by calling set_rate in power_on to force pre pll re-configuration.
Signed-off-by: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 620961fcfc1d..2f01259823ea 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -245,6 +245,7 @@ struct inno_hdmi_phy {
struct clk_hw hw;
struct clk *phyclk;
unsigned long pixclock;
+ unsigned long tmdsclock;
};
struct pre_pll_config {
@@ -485,6 +486,8 @@ static int inno_hdmi_phy_power_on(struct phy *phy)
dev_dbg(inno->dev, "Inno HDMI PHY Power On\n");
+ inno->plat_data->clk_ops->set_rate(&inno->hw, inno->pixclock, 24000000);
+
ret = clk_prepare_enable(inno->phyclk);
if (ret)
return ret;
@@ -509,6 +512,8 @@ static int inno_hdmi_phy_power_off(struct phy *phy)
clk_disable_unprepare(inno->phyclk);
+ inno->tmdsclock = 0;
+
dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n");
return 0;
@@ -628,6 +633,9 @@ static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
__func__, rate, tmdsclock);
+ if (inno->pixclock == rate && inno->tmdsclock == tmdsclock)
+ return 0;
+
cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
if (IS_ERR(cfg))
return PTR_ERR(cfg);
@@ -670,6 +678,7 @@ static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
}
inno->pixclock = rate;
+ inno->tmdsclock = tmdsclock;
return 0;
}
@@ -781,6 +790,9 @@ static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
__func__, rate, tmdsclock);
+ if (inno->pixclock == rate && inno->tmdsclock == tmdsclock)
+ return 0;
+
cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
if (IS_ERR(cfg))
return PTR_ERR(cfg);
@@ -820,6 +832,7 @@ static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
}
inno->pixclock = rate;
+ inno->tmdsclock = tmdsclock;
return 0;
}
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jonas Karlman <jonas@kwiboo.se>
Date: Sun, 17 Feb 2019 22:14:38 +0000
Subject: [PATCH] mmc: core: set initial signal voltage on power off
Some boards have SD card connectors where the power rail cannot be switched
off by the driver. If the card has not been power cycled, it may still be
using 1.8V signaling after a warm re-boot. Bootroms expecting 3.3V signaling
will fail to boot from a UHS card that continue to use 1.8V signaling.
Set initial signal voltage in mmc_power_off() to allow re-boot to function.
This fixes re-boot with UHS cards on Asus Tinker Board (Rockchip RK3288),
same issue have been seen on some Rockchip RK3399 boards.
I am sending this as a RFC because I have no insights into SD/MMC subsystem,
this change fix a re-boot issue on my boards and does not break emmc/sdio.
Is this an acceptable workaround? Any advice is appreciated.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
drivers/mmc/core/core.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index ef53a2578824..d4c53074154a 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1358,6 +1358,14 @@ void mmc_power_off(struct mmc_host *host)
if (host->ios.power_mode == MMC_POWER_OFF)
return;
+ mmc_set_initial_signal_voltage(host);
+
+ /*
+ * This delay should be sufficient to allow the power supply
+ * to reach the minimum voltage.
+ */
+ mmc_delay(host->ios.power_delay_ms);
+
mmc_pwrseq_power_off(host);
host->ios.clock = 0;
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Wed, 23 Jun 2021 16:59:18 +0200
Subject: [PATCH] arm64: dts: rockchip: Add sdmmc_ext for RK3328
RK3328 SoC has a fourth mmc controller called SDMMC_EXT. Some
boards have sdio wifi connected to it. In order to use it
one would have to add the pinctrls from sdmmc0ext group which
is done on board level.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 49ae15708a0b..60348d517efb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -993,6 +993,20 @@ usb_host0_ohci: usb@ff5d0000 {
status = "disabled";
};
+ sdmmc_ext: mmc@ff5f0000 {
+ compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff5f0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>,
+ <&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMCEXT>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
usbdrd3: usb@ff600000 {
compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
reg = <0x0 0xff600000 0x0 0x100000>;
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Wed, 23 Jun 2021 17:02:08 +0200
Subject: [PATCH] arm64: dts: rockchip: Add sdmmc/sdio/emmc reset controls for
RK3328
The DW MCI controller driver will use them to reset the IP block before
initialisation.
Fixes: d717f7352ec6 ("arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 60348d517efb..d7e44d174d7b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -871,6 +871,8 @@ sdmmc: mmc@ff500000 {
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_MMC0>;
+ reset-names = "reset";
status = "disabled";
};
@@ -883,6 +885,8 @@ sdio: mmc@ff510000 {
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_SDIO>;
+ reset-names = "reset";
status = "disabled";
};
@@ -895,6 +899,8 @@ emmc: mmc@ff520000 {
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
+ resets = <&cru SRST_EMMC>;
+ reset-names = "reset";
status = "disabled";
};
View Git Blame Copy Permalink