Lakka-LibreELEC/projects/NXP/devices/iMX6/filesystem/usr/bin/rdu-network

#!/bin/sh

ACTION=$1

LOGGER_TAG="rdu-network"
MODEL=$(cat /sys/firmware/devicetree/base/model)

IP_IFACE=""
BR_NAME=""
BR_IFACES=""
UNUSED_IFACES=""
USED_IFACES=""

function log
{
    logger -t "${LOGGER_TAG}" "$@"
}

function logerr
{
    logger -t "${LOGGER_TAG}" -p "err" "$@"
}

# Select setup based on model

case "${MODEL}" in
    "ZII RDU2+ Board" | "ZII RDU2 Board")
        log "Loading RDU2 networking setup..."
        IP_IFACE="eth1"
        BR_NAME="br0"
        BR_IFACES="netaux netleft netright gigabit_proc"
        ALL_IFACES="eth0 ${IP_IFACE} ${BR_IFACES} ${BR_NAME}"
        ;;
    "ZII RDU1 Board")
        log "Loading RDU1 networking setup..."
        IP_IFACE="br0"
        BR_NAME="br0"
        BR_IFACES="netaux netleft netright"
        ALL_IFACES="eth0 ${BR_NAME} ${BR_IFACES}"
        ;;
    *)
        logerr "invalid hardware model detected: ${MODEL}"
        exit 1
        ;;
esac

case "${ACTION}" in

    "start")

        # Assume RDU network is already started if the bridge is available
        if [ -d /sys/class/net/${BR_NAME} ]; then
            log "Networking setup is already started"
            exit 0
        fi

        # Cleanup all addresses from all interfaces and bring them down
        log "Resetting interfaces..."
        for IFACE in ${ALL_IFACES}; do
            log "  Resetting ${IFACE}..."
            ip addr flush dev ${IFACE} >/dev/null 2>&1
            ip link set dev ${IFACE} down >/dev/null 2>&1
        done

        # Create bridge with all interfaces
        log "Creating bridge interface..."
        brctl addbr ${BR_NAME} >/dev/null 2>&1
        for IFACE in ${BR_IFACES}; do
            log "  Adding ${IFACE} to bridge..."
            brctl addif ${BR_NAME} ${IFACE} >/dev/null 2>&1
        done

        # Bring all bridge interfaces and the bridge itself up
        log "Bringing up all interfaces..."
        for IFACE in ${ALL_IFACES}; do
            log "  Bringing up ${IFACE}..."
            ip link set dev ${IFACE} up >/dev/null 2>&1
        done

        # All done
        log "RDU networking started"
        exit 0
        ;;

    "stop")

        # Assume RDU network is already stopped if the bridge is available
        if [ ! -d /sys/class/net/${BR_NAME} ]; then
            log "Networking setup is already stopped"
            exit 0
        fi

        # Cleanup all addresses from all interfaces and bring them down
        log "Resetting interfaces..."
        for IFACE in ${ALL_IFACES}; do
            ip addr flush dev ${IFACE} >/dev/null 2>&1
            ip link set dev ${IFACE} down >/dev/null 2>&1
        done

        # Remove bridge interfaces and bridge itself
        log "Removing bridge interface..."
        for IFACE in ${BR_IFACES}; do
            brctl delif ${BR_NAME} ${IFACE} >/dev/null 2>&1
        done
        brctl delbr ${BR_NAME} >/dev/null 2>&1

        # All done
        log "RDU networking stopped"
        exit 0
        ;;

    *)
        logerr "invalid action requested: ${ACTION}"
        exit 2
        ;;
esac