heimgard-8640 login: root Password: BusyBox v1.36.1 (2024-09-03 10:19:25 CEST) built-in shell (ash) ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██████████ ██████████ ██████████ ██████████ ██████████ ██████████ ,, ██████████ ██████████ ,▄██▓╖ ██████████ ██████████ ╓▓██████▓▄ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ ██████████ ╠█████████ ██████████ """""""""" """""""""" """""""""" HeimgardOS Version: 7.3.3.17.2.0 OpenWrt base: 23.05.2 ------------------------------------ root@heimgard-8640:~# reboot root@heimgard-8640:~# [57058.541781] reboot: Restarting system Secure key does not exist EN7523DRAMC V0.5 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x17, OCDN:0x1b, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=512MB U-Boot 2023.07.02-OpenWrt-r23630-842932a63d-00059-g88f17672a-dirty (Aug 01 2024 - 20:30:50 +0200) CPU: Airoha EN7529DT DRAM: 496 MiB Core: 7 devices, 6 uclasses, devicetree: fit spi-nand: spi_nand spinand@0: Winbond SPI NAND was found. spi-nand: spi_nand spinand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 + 0x000000000000-0x000010000000 : "spi-nand0" + 0x000000000000-0x000000100000 : "u-boot" + 0x000000100000-0x000010000000 : "ubi" In: serial@1fbf0000 Out: serial@1fbf0000 Err: serial@1fbf0000 Net: eth0: en75xx-eth Loading Environment from UBI... ubi0: default fastmap pool size: 100 ubi0: default fastmap WL pool size: 50 ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "ubi", size 255 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 16/7, WL threshold: 4096, image sequence number: 572855880 ubi0: available PEBs: 277, total reserved PEBs: 1763, PEBs reserved for bad PEB handling: 40 Read 126976 bytes from volume env1 to 9eaf2980 Read 126976 bytes from volume env2 to 9eb119c0 OK apply matching dtb: en7523-pixly-r2 Autoboot in 2 seconds => aaaaaaaaa         tftpboot ut boot.bin 0   en75xx-eth: using internal switch Using en75xx-eth device TFTP from server 192.168.10.25; our IP address is 192.168.10.100 Filename 'uboot.bin'. Load address: 0x80500000 Loading: *################################################## 296.8 KiB 43.9 KiB/s done Bytes transferred = 303936 (4a340 hex) => bootm Wrong Image Format for bootm command ERROR: can't get kernel image! =>   bootm 0c x80502 0200 ## Loading kernel from FIT Image at 80500200 ... Using 'conf-uboot' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-u-boot Type: Kernel Image Compression: lzma compressed Data Start: 0x805002e4 Data Size: 295676 Bytes = 288.7 KiB Architecture: ARM OS: Linux Load Address: 0x80200000 Entry Point: 0x80200000 Hash algo: crc32 Hash value: f1c4e542 Hash algo: sha1 Hash value: 76e2e51cb05109fa954ee9b8939ec56b39a0ba87 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt from FIT Image at 80500200 ... Using 'conf-uboot' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v_v1 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x8054871c Data Size: 6352 Bytes = 6.2 KiB Architecture: ARM Load Address: 0x82000000 Hash algo: crc32 Hash value: 4cb30ee3 Hash algo: sha1 Hash value: ce94272b0b0ce9cec2bdcbffcb2880c7ade6529d Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from 0x8054871c to 0x82000000 Booting using the fdt blob at 0x82000000 Working FDT set to 82000000 Uncompressing Kernel Image ERROR: reserving fdt memory region failed (addr=80000000 size=40000 flags=4) ERROR: reserving fdt memory region failed (addr=80000000 size=40000 flags=4) Loading Device Tree to 9eb27000, end 9eb2b8cf ... OK Working FDT set to 9eb27000 Starting kernel ... U-Boot 2026.01-OpenWrt-r0-7e9932c (Apr 15 2026 - 22:19:08 +0000) CPU: Airoha EN7523/EN7529/EN7562 Model: TP-Link xx230v v1 DRAM: 512 MiB Core: 24 devices, 16 uclasses, devicetree: separate Loading Environment from UBI... spi-nand: spi_nand nand@0: Winbond SPI NAND was found. spi-nand: spi_nand nand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 ubi0 error: init_volumes: not enough PEBs, required 1719, available 915 ubi0 error: ubi_wl_init: no enough physical eraseblocks (-804, need 1) ubi0 error: ubi_attach_mtd_dev: failed to attach mtd5, error -12 UBI error: cannot attach mtd5 UBI error: cannot initialize UBI, error -12 UBI init error 12 Please check, if the correct MTD partition is used (size big enough?) ** Cannot find mtd partition "ubi" In: serial Out: serial Err: serial Net: Warning: ethernet@1fb50000 (eth0) using random MAC address - ba:b3:d1:05:19:d3 eth0: ethernet@1fb50000 Hit any key to stop autoboot: 3  0 U-Boot>     setenv ipaddr 192.1681 .10.1 25  100 U-Boot> setne  env serverip 192.168.10.26 5 U-Boot> tftpboot init0511.bin Using ethernet@1fb50000 device TFTP from server 192.168.10.25; our IP address is 192.168.10.100 Filename 'init0511.bin'. Load address: 0x86a00000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 585 KiB/s done Bytes transferred = 24379392 (1740000 hex) U-Boot> bootm 0x86a00000 ## Loading kernel (any) from FIT Image at 86a00000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.85 Type: Kernel Image Compression: lzma compressed Data Start: 0x86a000e4 Data Size: 24331375 Bytes = 23.2 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 1e0b2f53 Hash algo: sha1 Hash value: 384bd53ff0143250d4ca848efc1ad2ef76fc30fc Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt (any) from FIT Image at 86a00000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt genexis_cx30 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x8813468c Data Size: 13947 Bytes = 13.6 KiB Architecture: ARM Hash algo: crc32 Hash value: ecc9257e Hash algo: sha1 Hash value: 26a12039070ffa053f377166d9d75b5ee07a65e4 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x8813468c Working FDT set to 8813468c Uncompressing Kernel Image to 80208000 Loading Device Tree to 9eb1e000, end 9eb2467a ... OK Working FDT set to 9eb1e000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.85 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 r33479-5f7ec5c8b9) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Wed May 6 19:49:24 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Heimgard/Genexis CX30 [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff] [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000844fffff] [ 0.000000] node 0: [mem 0x0000000084500000-0x00000000848fffff] [ 0.000000] node 0: [mem 0x0000000084900000-0x00000000862fffff] [ 0.000000] node 0: [mem 0x0000000086300000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000 [ 0.000000] OF: reserved mem: 0x84000000..0x840fffff (1024 KiB) nomap non-reusable npu_binary@84000000 [ 0.000000] OF: reserved mem: 0x84100000..0x844fffff (4096 KiB) nomap non-reusable qdma0-buf@84100000 [ 0.000000] OF: reserved mem: 0x84900000..0x84cfffff (4096 KiB) nomap non-reusable qdma1-buf@84900000 [ 0.000000] OF: reserved mem: 0x84d00000..0x862fffff (22528 KiB) nomap non-reusable npu-pkt@84d00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 14 pages/cpu s25228 r8192 d23924 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008801] Switching to timer-based delay loop, resolution 40ns [ 0.015556] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.026939] CPU: Testing write buffer coherency: ok [ 0.032333] pid_max: default: 32768 minimum: 301 [ 0.044103] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052157] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063711] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070949] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.078317] rcu: Hierarchical SRCU implementation. [ 0.083583] rcu: Max phase no-delay instances is 1000. [ 0.089602] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.098802] smp: Bringing up secondary CPUs ... [ 0.118862] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.118917] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.119064] smp: Brought up 1 node, 2 CPUs [ 0.136577] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.143477] CPU: All CPU(s) started in SVC mode. [ 0.149026] Memory: 452596K/522240K available (7756K kernel code, 622K rwdata, 2020K rodata, 20480K init, 217K bss, 68512K reserved, 0K cma-reserved) [ 0.168064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.178937] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.189857] pinctrl core: initialized pinctrl subsystem [ 0.197626] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.204435] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.212794] thermal_sys: Registered thermal governor 'step_wise' [ 0.212882] cpuidle: using governor menu [ 0.226480] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller [ 0.236436] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller [ 0.254749] SCSI subsystem initialized [ 0.259120] usbcore: registered new interface driver usbfs [ 0.265204] usbcore: registered new interface driver hub [ 0.271112] usbcore: registered new device driver usb [ 0.278143] clocksource: Switched to clocksource arch_sys_counter [ 0.290943] NET: Registered PF_INET protocol family [ 0.296460] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.305320] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.314577] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.323111] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.331666] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.339622] TCP: Hash tables configured (established 4096 bind 4096) [ 0.346907] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.355123] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.362331] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.370428] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.376684] PCI: CLS 0 bytes, default 64 [ 0.382519] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.391382] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.397804] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.690744] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.697959] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 1.226658] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 1.233519] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.239573] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 1.247389] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port [ 1.255658] pci 0000:00:00.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.264573] pci 0000:00:00.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.272499] pci 0000:00:00.0: PCI bridge to [bus 00] [ 1.278054] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 1.287708] PCI: bus0: Fast back to back transfers disabled [ 1.293889] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.303339] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 PCIe Endpoint [ 1.311484] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.319168] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.326348] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.334664] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.341769] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.358773] PCI: bus1: Fast back to back transfers disabled [ 1.364906] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.372283] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]: assigned [ 1.380527] pci 0000:00:00.0: BAR 0 [mem 0x20200000 64bit pref disabled]: assigned [ 1.388902] pci 0000:00:00.0: BAR 0: error updating (0x2020000c != 0x0000000c) [ 1.396880] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff 64bit pref]: assigned [ 1.405485] pci 0000:01:00.0: BAR 2 [mem 0x20100000-0x20107fff 64bit]: assigned [ 1.413611] pci 0000:01:00.0: BAR 4 [mem 0x20108000-0x20108fff 64bit pref]: assigned [ 1.422216] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.427705] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 1.435272] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.442170] pci_bus 0000:01: resource 1 [mem 0x20000000-0x201fffff] [ 1.449779] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.457243] pcieport 0000:00:00.0: PME: Signaling with IRQ 30 [ 1.465215] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.472456] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.629044] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.635857] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.641928] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.649814] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.658026] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.666952] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.674878] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.680405] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.690062] PCI: bus0: Fast back to back transfers disabled [ 1.696213] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.705720] pci 0001:01:00.0: [14c3:7906] type 00 class 0x028000 PCIe Endpoint [ 1.713932] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.721625] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.728818] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.737121] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 1.744209] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 1.761309] PCI: bus1: Fast back to back transfers disabled [ 1.767450] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.774816] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 1.783065] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 1.791438] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 1.799427] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 1.808020] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22107fff 64bit]: assigned [ 1.816154] pci 0001:01:00.0: BAR 4 [mem 0x22108000-0x22108fff 64bit pref]: assigned [ 1.824758] pci 0001:00:01.0: PCI bridge to [bus 01] [ 1.830276] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 1.837800] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 1.844701] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 1.852276] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 1.859762] pcieport 0001:00:01.0: PME: Signaling with IRQ 32 [ 1.867911] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.875928] printk: legacy console [ttyS0] disabled [ 1.881756] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 33, base_baud = 115200) is a 16550 [ 1.891441] printk: legacy console [ttyS0] enabled [ 1.891441] printk: legacy console [ttyS0] enabled [ 1.901519] printk: legacy bootconsole [ns16550] disabled [ 1.901519] printk: legacy bootconsole [ns16550] disabled [ 2.066515] random: crng init done [ 2.070869] airoha-spi 1fa10000.spi: boot type: NAND [ 2.076431] spi-nand spi0.0: Winbond SPI NAND was found. [ 2.081797] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 [ 18.788030] 2 fixed-partitions partitions found on MTD device spi0.0 [ 18.794684] Creating 2 MTD partitions on "spi0.0": [ 18.799530] 0x000000000000-0x000000100000 : "u-boot" [ 18.807273] 0x000000100000-0x000010000000 : "ubi" [ 19.372553] ubi0: attaching mtd1 [ 20.464986] ubi0: scanning is finished [ 20.478804] ubi0: attached mtd1 (name "ubi", size 255 MiB) [ 20.484322] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 20.491247] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 20.498044] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 20.505015] ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0 [ 20.511119] ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128 [ 20.518442] ubi0: max/mean erase counter: 16/7, WL threshold: 4096, image sequence number: 572855880 [ 20.527574] ubi0: available PEBs: 279, total reserved PEBs: 1761, PEBs reserved for bad PEB handling: 40 [ 20.537664] ubi0: background thread "ubi_bgt0d" started, PID 162 [ 20.543725] spi_master spi0: cannot find modalias for /spi@1fa10000/flash@1 [ 20.550784] spi_master spi0: Failed to create SPI device for /spi@1fa10000/flash@1 [ 80.648067] rcu: INFO: rcu_sched self-detected stall on CPU [ 80.653663] rcu: 0-....: (5999 ticks this GP) idle=08cc/1/0x40000004 softirq=304/304 fqs=3000 [ 80.662288] rcu: (t=6001 jiffies g=-943 q=80 ncpus=2) [ 80.667432] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.85 #0 [ 80.667443] Hardware name: Generic DT based system [ 80.667448] PC is at handle_softirqs+0x90/0x268 [ 80.667467] LR is at 0xed4720 [ 80.667474] pc : [] lr : [<00ed4720>] psr: 40000113 [ 80.667480] sp : c0013fa0 ip : 00000000 fp : c0085280 [ 80.667485] r10: c1ea6d00 r9 : c1ea6d00 r8 : c1f03d40 [ 80.667491] r7 : 0000000a r6 : 00000040 r5 : 00000282 r4 : c0085280 [ 80.667497] r3 : 1daae000 r2 : 00000000 r1 : c1ea6d00 r0 : cfe9e868 [ 80.667505] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 80.667513] Control: 10c5383d Table: 835d806a DAC: 00000055 [ 80.667517] Call trace: [ 80.667526] handle_softirqs from irq_exit+0x98/0xc4 [ 80.667548] irq_exit from call_with_stack+0x18/0x20 [ 80.667568] call_with_stack from __irq_svc+0x6c/0x7c [ 80.667579] Exception stack(0xc005bcd0 to 0xc005bd18) [ 80.667588] bcc0: c3268400 0000000f ffff0000 c3268794 [ 80.667598] bce0: c3268400 00000001 0000000f e029834c 0000000f 00000af0 e0298348 c1fc2d10 [ 80.667606] bd00: 00055e15 c005bd20 c05ecb08 c06c5194 a0000013 ffffffff [ 80.667613] __irq_svc from page_pool_destroy+0x20/0x18c [ 80.667628] page_pool_destroy from airoha_qdma_cleanup+0x27c/0x368 [ 80.667645] airoha_qdma_cleanup from airoha_probe+0x2150/0x25b8 [ 80.667659] airoha_probe from platform_probe+0x5c/0xb4 [ 80.667677] platform_probe from really_probe+0xc8/0x2c8 [ 80.667691] really_probe from __driver_probe_device+0x88/0x1a0 [ 80.667703] __driver_probe_device from driver_probe_device+0x38/0xe4 [ 80.667714] driver_probe_device from __driver_attach+0x90/0x140 [ 80.667725] __driver_attach from bus_for_each_dev+0x60/0x94 [ 80.667744] bus_for_each_dev from bus_add_driver+0xd0/0x1fc [ 80.667760] bus_add_driver from driver_register+0x80/0x11c [ 80.667771] driver_register from do_one_initcall+0x48/0x27c [ 80.667785] do_one_initcall from kernel_init_freeable+0x230/0x284 [ 80.667801] kernel_init_freeable from kernel_init+0x1c/0x12c [ 80.667818] kernel_init from ret_from_fork+0x14/0x38 [ 80.667830] Exception stack(0xc005bfb0 to 0xc005bff8) [ 80.667838] bfa0: 00000000 00000000 00000000 00000000 [ 80.667847] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 80.667855] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 80.888695] sched: DL replenish lagged too much