EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  0 ECNT> setenv loadaddr 0x84fc8f18 ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 521.5 KiB/s done Bytes transferred = 18357292 (1181c2c hex) ERROR: Unknown file name ! botm  otm bootm flag=0, states=70f ## Loading kernel from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.71 Type: Kernel Image Compression: lzma compressed Data Start: 0x84fc8ffc Data Size: 18338204 Bytes = 17.5 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 57e9aefd Hash algo: sha1 Hash value: 4ea3b45647a80034c6e4244995be112e56b90f42 ## Loading fdt from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v_v1 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x861462d4 Data Size: 17706 Bytes = 17.3 KiB Architecture: ARM Hash algo: crc32 Hash value: edc1f415 Hash algo: sha1 Hash value: 7220cf555a2dc9bc2d980e0b1d19cda389e7818b Booting using the fdt blob at 0x861462d4 Uncompressing Kernel Image ... OK Loading Device Tree to 8cdf0000, end 8cdf7529 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.71 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 r33120-db0cb8f372) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Wed Feb 18 03:03:28 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TP-Link xx230v/xx530v v1 [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'npu_binary@84000000': base 0x84000000, size 10 MiB [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'qdma0-buf@86206800': base 0x84a00000, size 8 MiB [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x00000000851fffff] [ 0.000000] node 0: [mem 0x0000000085200000-0x00000000859fffff] [ 0.000000] node 0: [mem 0x0000000085a00000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000 [ 0.000000] OF: reserved mem: 0x84000000..0x849fffff (10240 KiB) nomap non-reusable npu_binary@84000000 [ 0.000000] OF: reserved mem: 0x84a00000..0x851fffff (8192 KiB) nomap non-reusable qdma0-buf@86206800 [ 0.000000] OF: reserved mem: 0x85200000..0x859fffff (8192 KiB) nomap non-reusable qdma1-buf@86a06800 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008801] Switching to timer-based delay loop, resolution 40ns [ 0.015579] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.026967] CPU: Testing write buffer coherency: ok [ 0.032349] pid_max: default: 32768 minimum: 301 [ 0.044103] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052154] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063683] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070894] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.078253] rcu: Hierarchical SRCU implementation. [ 0.083521] rcu: Max phase no-delay instances is 1000. [ 0.089541] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.098738] smp: Bringing up secondary CPUs ... [ 0.118789] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.118843] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.118989] smp: Brought up 1 node, 2 CPUs [ 0.136498] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.143398] CPU: All CPU(s) started in SVC mode. [ 0.148922] Memory: 170792K/260096K available (7863K kernel code, 601K rwdata, 2056K rodata, 66560K init, 220K bss, 88548K reserved, 0K cma-reserved) [ 0.168587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.179455] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.190342] pinctrl core: initialized pinctrl subsystem [ 0.197915] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.204702] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.213009] thermal_sys: Registered thermal governor 'step_wise' [ 0.213092] cpuidle: using governor menu [ 0.226289] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller [ 0.236156] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller [ 0.257031] SCSI subsystem initialized [ 0.261407] usbcore: registered new interface driver usbfs [ 0.267532] usbcore: registered new interface driver hub [ 0.273426] usbcore: registered new device driver usb [ 0.279160] Advanced Linux Sound Architecture Driver Initialized. [ 0.287105] clocksource: Switched to clocksource arch_sys_counter [ 0.299877] NET: Registered PF_INET protocol family [ 0.305383] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.313998] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.323240] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.331768] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.340218] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.348121] TCP: Hash tables configured (established 2048 bind 2048) [ 0.355502] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.363706] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.370923] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.379004] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.385260] PCI: CLS 0 bytes, default 64 [ 0.391050] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.400264] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.406695] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.430396] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.437744] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 1.037112] mtk-pcie 1fa91000.pcie: Port0 link down [ 1.042780] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 1.049648] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.055677] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 1.064489] PCI: bus0: Fast back to back transfers enabled [ 1.070550] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.077771] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.084975] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.615587] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.622436] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.628507] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.636416] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.644665] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.653574] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.661499] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.667018] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.676916] PCI: bus0: Fast back to back transfers disabled [ 1.683107] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.692621] pci 0001:01:00.0: [14c3:7915] type 00 class 0x000280 PCIe Endpoint [ 1.700785] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.708475] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00003fff 64bit pref] [ 1.716130] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.724404] pci 0001:01:00.0: supports D1 D2 [ 1.729105] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.736712] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.753739] PCI: bus1: Fast back to back transfers disabled [ 1.759906] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.767257] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 1.775484] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 1.783858] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 1.791853] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 1.800454] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22103fff 64bit pref]: assigned [ 1.809055] pci 0001:01:00.0: BAR 4 [mem 0x22104000-0x22104fff 64bit pref]: assigned [ 1.817656] pci 0001:00:01.0: PCI bridge to [bus 01] [ 1.823138] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 1.830678] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 1.837576] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 1.845173] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 1.852687] pcieport 0001:00:01.0: PME: Signaling with IRQ 31 [ 1.861217] airoha_hsdma 1fa01800.hsdma: Airoha HSDMA driver registered [ 1.868977] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.876899] printk: legacy console [ttyS0] disabled [ 1.882770] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 33, base_baud = 115200) is a 16550 [ 1.892436] printk: legacy console [ttyS0] enabled [ 1.892436] printk: legacy console [ttyS0] enabled [ 1.902523] printk: legacy bootconsole [ns16550] disabled [ 1.902523] printk: legacy bootconsole [ns16550] disabled [ 1.917917] spi-nand spi0.0: ESMT SPI NAND was found. [ 1.922997] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 1.927210] random: crng init done [ 1.947433] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.953813] Creating 7 MTD partitions on "spi0.0": [ 1.958664] 0x000000000000-0x000000080000 : "bootloader" [ 1.965635] 0x000000080000-0x000000120000 : "romfile" [ 1.972957] 0x0000000a0000-0x000000240000 : "misc" [ 1.980991] 0x0000001a0000-0x000008000000 : "kernel_dummy" [ 2.256189] 0x0000001a0000-0x0000011a0000 : "kernel" [ 2.261943] 0x0000011a0000-0x000007500000 : "rootfs" [ 2.268032] mtd: setting mtd5 (rootfs) as root device [ 2.273455] mtdsplit: no squashfs found in "rootfs" [ 2.278400] 0x000007500000-0x000008000000 : "reserved_bmt" [ 2.287856] ecnt-sgmii 1fa65100.hsgmii: hsgmii probe init start [ 2.293818] ecnt-sgmii 1fa65100.hsgmii: error -EINVAL: invalid resource (null) [ 2.301101] ecnt-sgmii 1fa65100.hsgmii: probe with driver ecnt-sgmii failed with error -22 [ 2.389182] airoha-npu 1e900000.npu: L2C sram: 0x00, FPGA Stage: 0 [C0]core freq at 333000000 Hz [C0]timer_init: Timer clk is running at 125 Mhz [C0]wcid_counter_init:0 [C0]wcid_counter_init:1 [C0][NPU] ba_node_init... [C0]baNode_array_init [C0]counter_init:2 [C0][NPU] queue_mutex_init... [C0]qdma_init [C1]core1_main [C2]timer_isr Store Value 1e903000, val[C2]core2_main [ 3.067097] airoha-npu 1e900000.npu: NPU Version not support get version [ 3.087711] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibration. [ 3.100894] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 3.106153] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1 [ 3.117562] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x0000000000200010 [ 3.126762] xhci-mtk 1fab0000.usb: irq 46, io mem 0x1fab0000 [ 3.132594] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 3.137865] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2 [ 3.145278] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 3.153066] hub 1-0:1.0: USB hub found [ 3.156974] hub 1-0:1.0: 2 ports detected [ 3.161745] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.170560] hub 2-0:1.0: USB hub found [ 3.174476] hub 2-0:1.0: 1 port detected [ 3.179285] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz [ 3.197983] en7523-audio 1fbe2200.afe: mtk_afe_combine_sub_dai(), num of dai 2 [ 3.205823] NET: Registered PF_INET6 protocol family [ 3.212111] Segment Routing with IPv6 [ 3.215823] In-situ OAM (IOAM) with IPv6 [ 3.219880] NET: Registered PF_PACKET protocol family [ 3.225225] 8021q: 802.1Q VLAN Support v1.8 [ 3.229561] Registering SWP/SWPB emulation handler [ 3.320597] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode [ 3.328373] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.339963] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.351447] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.362942] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.374333] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode [ 3.381136] DSA: tree 0 setup [ 3.384436] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx [ 3.392779] clk: Disabling unused clocks [ 3.396726] PM: genpd: Disabling unused power domains [ 3.401877] ALSA device list: [ 3.404859] No soundcards found. [ 3.475493] Freeing unused kernel image (initmem) memory: 66560K [ 3.481843] Run /init as init process [ 4.140815] init: Console is alive [ 4.144438] init: - watchdog - [ 4.160159] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.175895] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 4.205564] usbcore: registered new interface driver usb-storage [ 4.212212] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.229398] init: - preinit - Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 5.572533] procd: - early - [ 5.575561] procd: - watchdog - [ 6.109290] procd: - watchdog - [ 6.112688] procd: - ubus - [ 6.168774] procd: - init - Please press Enter to activate this console. [ 6.560892] kmodloader: loading kernel modules from /etc/modules.d/* [ 6.880484] i2c_dev: i2c /dev entries driver [ 6.912572] ntfs3: Enabled Linux POSIX ACLs support [ 6.931175] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357 [ 6.938457] Backport generated by backports.git c8a37ce [ 7.006949] usbcore: registered new interface driver ums-alauda [ 7.048157] usbcore: registered new interface driver ums-cypress [ 7.055333] usbcore: registered new interface driver ums-datafab [ 7.078213] usbcore: registered new interface driver ums-freecom [ 7.085883] usbcore: registered new interface driver ums-isd200 [ 7.099165] usbcore: registered new interface driver ums-jumpshot [ 7.109418] usbcore: registered new interface driver ums-karma [ 7.119760] usbcore: registered new interface driver ums-sddr09 [ 7.129927] usbcore: registered new interface driver ums-sddr55 [ 7.148068] usbcore: registered new interface driver ums-usbat [ 7.160313] urngd: v1.0.2 started. [ 7.188869] xt_time: kernel timezone is -0000 [ 7.322214] mt7915e 0001:01:00.0: enabling device (0140 -> 0142) [ 7.557526] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240429200716a [ 7.578972] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240429200752 [ 7.626475] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240429200812 [ 7.778515] mt7915e 0001:01:00.0: registering led 'mt76-phy0' [ 7.829698] mt7915e 0001:01:00.0: registering led 'mt76-phy1' [ 7.967138] PPP generic driver version 2.4.2 [ 7.972790] NET: Registered PF_PPPOX protocol family [ 7.990417] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 7.998368] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 8.066343] kmodloader: done loading kernel modules from /etc/modules.d/* [ 15.887743] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode [ 15.909413] br-lan: port 1(lan1) entered blocking state [ 15.914667] br-lan: port 1(lan1) entered disabled state [ 15.920058] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode [ 15.926698] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode [ 15.933871] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode [ 15.991386] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode [ 16.007288] br-lan: port 2(lan2) entered blocking state [ 16.012575] br-lan: port 2(lan2) entered disabled state [ 16.017967] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode [ 16.024972] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode [ 16.044394] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode [ 16.054850] br-lan: port 3(lan3) entered blocking state [ 16.060226] br-lan: port 3(lan3) entered disabled state [ 16.065514] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode [ 16.072660] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode [ 16.391139] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode [ 20.158572] mt7530-mmio 1fb58000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 20.167794] br-lan: port 2(lan2) entered blocking state [ 20.173040] br-lan: port 2(lan2) entered forwarding state EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  0 ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x81800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 521.5 KiB/s done Bytes transferred = 18357292 (1181c2c hex) ERROR: Unknown file name ! bootm bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.71 Type: Kernel Image Compression: lzma compressed Data Start: 0x818000e4 Data Size: 18338204 Bytes = 17.5 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 57e9aefd Hash algo: sha1 Hash value: 4ea3b45647a80034c6e4244995be112e56b90f42 ## Loading fdt from FIT Image at 81800000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v_v1 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x8297d3bc Data Size: 17706 Bytes = 17.3 KiB Architecture: ARM Hash algo: crc32 Hash value: edc1f415 Hash algo: sha1 Hash value: 7220cf555a2dc9bc2d980e0b1d19cda389e7818b Booting using the fdt blob at 0x8297d3bc Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 1 - must RESET board to recover resetting ... EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  0 ECNT> setenv loadaddr 0x84fc8f18 ECNT> saveenv Saving Environment to ECNT Flash... ...ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 521.5 KiB/s done Bytes transferred = 18357292 (1181c2c hex) ERROR: Unknown file name ! bootm bootm flag=0, states=70f ## Loading kernel from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.71 Type: Kernel Image Compression: lzma compressed Data Start: 0x84fc8ffc Data Size: 18338204 Bytes = 17.5 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 57e9aefd Hash algo: sha1 Hash value: 4ea3b45647a80034c6e4244995be112e56b90f42 ## Loading fdt from FIT Image at 84fc8f18 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v_v1 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x861462d4 Data Size: 17706 Bytes = 17.3 KiB Architecture: ARM Hash algo: crc32 Hash value: edc1f415 Hash algo: sha1 Hash value: 7220cf555a2dc9bc2d980e0b1d19cda389e7818b Booting using the fdt blob at 0x861462d4 Uncompressing Kernel Image ... OK Loading Device Tree to 8cdf0000, end 8cdf7529 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.71 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 r33120-db0cb8f372) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Wed Feb 18 03:03:28 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TP-Link xx230v/xx530v v1 [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'npu_binary@84000000': base 0x84000000, size 10 MiB [ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'qdma0-buf@86206800': base 0x84a00000, size 8 MiB [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x00000000851fffff] [ 0.000000] node 0: [mem 0x0000000085200000-0x00000000859fffff] [ 0.000000] node 0: [mem 0x0000000085a00000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000008fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000 [ 0.000000] OF: reserved mem: 0x84000000..0x849fffff (10240 KiB) nomap non-reusable npu_binary@84000000 [ 0.000000] OF: reserved mem: 0x84a00000..0x851fffff (8192 KiB) nomap non-reusable qdma0-buf@86206800 [ 0.000000] OF: reserved mem: 0x85200000..0x859fffff (8192 KiB) nomap non-reusable qdma1-buf@86a06800 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008800] Switching to timer-based delay loop, resolution 40ns [ 0.015578] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.026967] CPU: Testing write buffer coherency: ok [ 0.032349] pid_max: default: 32768 minimum: 301 [ 0.044104] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052154] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063685] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070898] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.078262] rcu: Hierarchical SRCU implementation. [ 0.083529] rcu: Max phase no-delay instances is 1000. [ 0.089558] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.098756] smp: Bringing up secondary CPUs ... [ 0.118815] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.118869] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.119017] smp: Brought up 1 node, 2 CPUs [ 0.136524] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.143424] CPU: All CPU(s) started in SVC mode. [ 0.148974] Memory: 170792K/260096K available (7863K kernel code, 601K rwdata, 2056K rodata, 66560K init, 220K bss, 88548K reserved, 0K cma-reserved) [ 0.168625] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.179491] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.190380] pinctrl core: initialized pinctrl subsystem [ 0.197956] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.204752] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.213062] thermal_sys: Registered thermal governor 'step_wise' [ 0.213145] cpuidle: using governor menu [ 0.226362] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller [ 0.236238] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller [ 0.257163] SCSI subsystem initialized [ 0.261512] usbcore: registered new interface driver usbfs [ 0.267663] usbcore: registered new interface driver hub [ 0.273530] usbcore: registered new device driver usb [ 0.279240] Advanced Linux Sound Architecture Driver Initialized. [ 0.287307] clocksource: Switched to clocksource arch_sys_counter [ 0.300088] NET: Registered PF_INET protocol family [ 0.305588] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.314145] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.323403] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.331936] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.340393] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.348300] TCP: Hash tables configured (established 2048 bind 2048) [ 0.355677] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.363888] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.371098] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.379193] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.385444] PCI: CLS 0 bytes, default 64 [ 0.391297] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.400506] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.406938] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.430713] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.438010] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 1.037282] mtk-pcie 1fa91000.pcie: Port0 link down [ 1.042942] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 1.049819] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.055851] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 1.064668] PCI: bus0: Fast back to back transfers enabled [ 1.070728] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.077956] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.085157] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.615709] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.622558] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.628626] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.636506] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.644748] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.653661] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.661586] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.667104] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.676997] PCI: bus0: Fast back to back transfers disabled [ 1.683189] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.692712] pci 0001:01:00.0: [14c3:7915] type 00 class 0x000280 PCIe Endpoint [ 1.700869] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.708571] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00003fff 64bit pref] [ 1.716235] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.724514] pci 0001:01:00.0: supports D1 D2 [ 1.729217] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.736826] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.753861] PCI: bus1: Fast back to back transfers disabled [ 1.760027] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.767380] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 1.775606] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 1.783981] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 1.791965] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 1.800566] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22103fff 64bit pref]: assigned [ 1.809172] pci 0001:01:00.0: BAR 4 [mem 0x22104000-0x22104fff 64bit pref]: assigned [ 1.817771] pci 0001:00:01.0: PCI bridge to [bus 01] [ 1.823260] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 1.830800] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 1.837697] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 1.845278] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 1.852740] pcieport 0001:00:01.0: PME: Signaling with IRQ 31 [ 1.861258] airoha_hsdma 1fa01800.hsdma: Airoha HSDMA driver registered [ 1.869031] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.876951] printk: legacy console [ttyS0] disabled [ 1.882850] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 33, base_baud = 115200) is a 16550 [ 1.892502] printk: legacy console [ttyS0] enabled [ 1.892502] printk: legacy console [ttyS0] enabled [ 1.902575] printk: legacy bootconsole [ns16550] disabled [ 1.902575] printk: legacy bootconsole [ns16550] disabled [ 1.915837] random: crng init done [ 1.917334] spi-nand spi0.0: ESMT SPI NAND was found. [ 1.924317] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 1.945371] 7 fixed-partitions partitions found on MTD device spi0.0 [ 1.951829] Creating 7 MTD partitions on "spi0.0": [ 1.956633] 0x000000000000-0x000000080000 : "bootloader" [ 1.963660] 0x000000080000-0x000000120000 : "romfile" [ 1.970891] 0x0000000a0000-0x000000240000 : "misc" [ 1.979259] 0x0000001a0000-0x000008000000 : "kernel_dummy" [ 2.255168] 0x0000001a0000-0x0000011a0000 : "kernel" [ 2.260963] 0x0000011a0000-0x000007500000 : "rootfs" [ 2.267041] mtd: setting mtd5 (rootfs) as root device [ 2.272511] mtdsplit: no squashfs found in "rootfs" [ 2.277471] 0x000007500000-0x000008000000 : "reserved_bmt" [ 2.286649] ecnt-sgmii 1fa65100.hsgmii: hsgmii probe init start [ 2.292687] ecnt-sgmii 1fa65100.hsgmii: error -EINVAL: invalid resource (null) [ 2.299952] ecnt-sgmii 1fa65100.hsgmii: probe with driver ecnt-sgmii failed with error -22 [ 2.389305] airoha-npu 1e900000.npu: L2C sram: 0x00, FPGA Stage: 0 [ 3.067261] airoha-npu 1e900000.npu: NPU Version not support get version [C1]core freq at 333000000 Hz [C1]timer_init: Timer clk is running at 125 Mhz [C1]core1_main [ 3.087884] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibration. [ 3.101067] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 3.106326] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1 [ 3.117739] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x0000000000200010 [ 3.126940] xhci-mtk 1fab0000.usb: irq 46, io mem 0x1fab0000 [ 3.132768] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 3.138044] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2 [ 3.145453] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 3.153226] hub 1-0:1.0: USB hub found [ 3.157142] hub 1-0:1.0: 2 ports detected [ 3.161978] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.170787] hub 2-0:1.0: USB hub found [ 3.174712] hub 2-0:1.0: 1 port detected [ 3.179518] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz [ 3.198145] en7523-audio 1fbe2200.afe: mtk_afe_combine_sub_dai(), num of dai 2 [ 3.205979] NET: Registered PF_INET6 protocol family [ 3.212271] Segment Routing with IPv6 [ 3.215981] In-situ OAM (IOAM) with IPv6 [ 3.220036] NET: Registered PF_PACKET protocol family [ 3.225367] 8021q: 802.1Q VLAN Support v1.8 [ 3.229712] Registering SWP/SWPB emulation handler [ 3.320949] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode [ 3.328700] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.340428] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.351910] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.363390] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Airoha EN7523 PHY] (irq=POLL) [ 3.374794] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode [ 3.381574] DSA: tree 0 setup [ 3.384837] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx [ 3.393197] clk: Disabling unused clocks [ 3.397142] PM: genpd: Disabling unused power domains [ 3.402290] ALSA device list: [ 3.405266] No soundcards found. [ 3.475483] Freeing unused kernel image (initmem) memory: 66560K [ 3.481843] Run /init as init process [ 4.140127] init: Console is alive [ 4.143765] init: - watchdog - [ 4.159743] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.175658] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 4.200164] usbcore: registered new interface driver usb-storage [ 4.206618] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.220964] init: - preinit - Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 5.583107] procd: - early - [ 5.586139] procd: - watchdog - [ 6.123784] procd: - watchdog - [ 6.127180] procd: - ubus - [ 6.183291] procd: - init - Please press Enter to activate this console. [ 6.572459] kmodloader: loading kernel modules from /etc/modules.d/* [ 6.895128] i2c_dev: i2c /dev entries driver [ 6.906680] ntfs3: Enabled Linux POSIX ACLs support [ 6.916021] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357 [ 6.923458] Backport generated by backports.git c8a37ce [ 6.972503] usbcore: registered new interface driver ums-alauda [ 6.982627] usbcore: registered new interface driver ums-cypress [ 6.992730] usbcore: registered new interface driver ums-datafab [ 7.000850] usbcore: registered new interface driver ums-freecom [ 7.011031] usbcore: registered new interface driver ums-isd200 [ 7.019688] usbcore: registered new interface driver ums-jumpshot [ 7.027051] usbcore: registered new interface driver ums-karma [ 7.035117] usbcore: registered new interface driver ums-sddr09 [ 7.045098] usbcore: registered new interface driver ums-sddr55 [ 7.052941] usbcore: registered new interface driver ums-usbat [ 7.155406] xt_time: kernel timezone is -0000 [ 7.346971] urngd: v1.0.2 started. [ 7.354510] mt7915e 0001:01:00.0: enabling device (0140 -> 0142) [ 7.618649] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240429200716a [ 7.650398] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240429200752 [ 7.699526] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240429200812 [ 7.838528] mt7915e 0001:01:00.0: registering led 'mt76-phy0' [ 7.898388] mt7915e 0001:01:00.0: registering led 'mt76-phy1' [ 8.031677] PPP generic driver version 2.4.2 [ 8.048803] NET: Registered PF_PPPOX protocol family [ 8.066031] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 8.073939] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 8.098424] kmodloader: done loading kernel modules from /etc/modules.d/* [ 28.378900] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode [ 28.391591] br-lan: port 1(lan1) entered blocking state [ 28.396890] br-lan: port 1(lan1) entered disabled state [ 28.402315] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode [ 28.409052] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode [ 28.416161] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode [ 28.453609] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode [ 28.466643] br-lan: port 2(lan2) entered blocking state [ 28.472069] br-lan: port 2(lan2) entered disabled state [ 28.477436] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode [ 28.484595] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode [ 28.508789] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode [ 28.528560] br-lan: port 3(lan3) entered blocking state [ 28.533825] br-lan: port 3(lan3) entered disabled state [ 28.539207] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode [ 28.546176] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode [ 28.820227] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode [ 32.638701] mt7530-mmio 1fb58000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 32.647786] br-lan: port 2(lan2) entered blocking state [ 32.653032] br-lan: port 2(lan2) entered forwarding state [ 2758.798731] mt7530-mmio 1fb58000.switch wan: Link is Up - 1Gbps/Full - flow control rx [ 2779.277543] mt7530-mmio 1fb58000.switch lan2: Link is Down [ 2779.283941] br-lan: port 2(lan2) entered disabled state [ 2782.398737] mt7530-mmio 1fb58000.switch lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 2782.407853] br-lan: port 2(lan2) entered blocking state [ 2782.413103] br-lan: port 2(lan2) entered forwarding state [ 2829.244795] br-lan: port 4(phy0-ap0) entered blocking state [ 2829.250491] br-lan: port 4(phy0-ap0) entered disabled state [ 2829.256142] mt7915e 0001:01:00.0 phy0-ap0: entered allmulticast mode [ 2829.262812] mt7915e 0001:01:00.0 phy0-ap0: entered promiscuous mode [ 2829.273680] mt7915e 0001:01:00.0 phy0-ap0: left allmulticast mode [ 2829.279916] mt7915e 0001:01:00.0 phy0-ap0: left promiscuous mode [ 2829.286068] br-lan: port 4(phy0-ap0) entered disabled state [ 2829.330721] br-lan: port 4(phy0-ap0) entered blocking state [ 2829.336324] br-lan: port 4(phy0-ap0) entered disabled state [ 2829.342037] mt7915e 0001:01:00.0 phy0-ap0: entered allmulticast mode [ 2829.348732] mt7915e 0001:01:00.0 phy0-ap0: entered promiscuous mode [ 2829.449308] br-lan: port 4(phy0-ap0) entered blocking state [ 2829.454906] br-lan: port 4(phy0-ap0) entered forwarding state [ 2836.275123] br-lan: port 5(phy1-ap0) entered blocking state [ 2836.280887] br-lan: port 5(phy1-ap0) entered disabled state [ 2836.286559] mt7915e 0001:01:00.0 phy1-ap0: entered allmulticast mode [ 2836.293496] mt7915e 0001:01:00.0 phy1-ap0: entered promiscuous mode [ 2836.330298] br-lan: port 5(phy1-ap0) entered blocking state [ 2836.335906] br-lan: port 5(phy1-ap0) entered forwarding state [ 2836.342677] mt7915e 0001:01:00.0 phy1-ap0: left allmulticast mode [ 2836.348909] mt7915e 0001:01:00.0 phy1-ap0: left promiscuous mode [ 2836.355056] br-lan: port 5(phy1-ap0) entered disabled state [ 2836.362987] br-lan: port 5(phy1-ap0) entered blocking state [ 2836.368715] br-lan: port 5(phy1-ap0) entered disabled state [ 2836.374340] mt7915e 0001:01:00.0 phy1-ap0: entered allmulticast mode [ 2836.380986] mt7915e 0001:01:00.0 phy1-ap0: entered promiscuous mode [ 2836.819642] br-lan: port 5(phy1-ap0) entered blocking state [ 2836.825245] br-lan: port 5(phy1-ap0) entered forwarding state EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  0 ECNT> reset resetting ... EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  0 ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 638.7 KiB/s done Bytes transferred = 22466560 (156d000 hex) ERROR: Unknown file name ! flash write 0x11a0000 0x$filesize $loadaddr write: src=0x84fc8f18, len=0x156d000, dst=0x11a0000 ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ECNT> boot Boot flag csum incorrect, return image0 Prepare to boot image0 Boot flag csum incorrect, return image0 bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'kernel@1' kernel subimage Description: ECONET Linux kernel Type: Kernel Image Compression: lzma compressed Data Start: 0x818022a4 Data Size: 4730117 Bytes = 4.5 MiB Architecture: ARM OS: Linux Load Address: 0x80088000 Entry Point: 0x80088000 Hash algo: sha1 Hash value: 71831c68c18b0d0ebe74b42ed8133ee86ccf6ce1 ## Loading fdt from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: ECONET Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x818002fc Data Size: 7913 Bytes = 7.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24 Booting using the fdt blob at 0x818002fc Uncompressing Kernel Image ... OK Loading Device Tree to 8cdf2000, end 8cdf6ee8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.115 (compile@342f0d6254c6) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Tue Mar 19 09:18:53 UTC 2024 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: econet,en7523 bootconsole [uart0] enabled Memory policy: Data cache writealloc psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. [c08472b8]npu_pkt_buf_addr=8dff37c0:8dff37c0 npu_pkt_buffer memblock_alloc:8dff37c0,buf_size=1600000 PERCPU: Embedded 12 pages/cpu @cdfd9000 s18048 r8192 d22912 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=D8:44:89:BD:CF:D8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 212276K/260864K available (8124K kernel code, 3998K rwdata, 2400K rodata, 240K init, 666K bss, 48588K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0088000 - 0xc0acf450 (10526 kB) .init : 0xc0ad0000 - 0xc0b0c000 ( 240 kB) .data : 0xc0b0c000 - 0xc0ef3980 (3999 kB) .bss : 0xc0ef6000 - 0xc0f9c8e0 ( 667 kB) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:64 nr_irqs:64 64 CPU0: found redistributor 0 region 0:0x09080000 Architected cp15 timer(s) running at 25.00MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 40ns console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80088280 - 0x800882d8 CPU1: found redistributor 1 region 0:0x090a0000 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (100.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. l2c_sram_size:0x0 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = cd579800 ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available sgmii probe init start sgmii:int_name: sgmii_pcie0 sgmii:int_id: 0 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d087c100 sgmii:sgmii->pcs2_base= d087ea00 sgmii:sgmii->an_base= d0944000 sgmii:sgmii->ra_base= d0946600 sgmii:sgmii->phya_base= d0948c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d087ea20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_pcie1 sgmii:int_id: 1 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d094a100 sgmii:sgmii->pcs2_base= d094ca00 sgmii:sgmii->an_base= d094e000 sgmii:sgmii->ra_base= d0950600 sgmii:sgmii->phya_base= d0952c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d094ca20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_usb0 sgmii:int_id: 2 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d0954100 sgmii:sgmii->pcs2_base= d0956a00 sgmii:sgmii->an_base= d0958000 sgmii:sgmii->ra_base= d095a600 sgmii:sgmii->phya_base= d095cc00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d0956a20, val=0 sgmii: sync_int exit sgmii probe init exit TC3162 hardware watchdog module loaded. irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [crypto_k] res->name:/crypto_k@1fb70000 [crypto_k] res->start:0x1fb70000 === [crypto_k] res->end:0x1fb70803 === [crypto_k] ecnt_crypto_k->base:0xd09dc000 [trng] ecnt_trng_drv_probe test_uc:d0826000 test_c:cd4c0000 cpu_top->base:d09e6800 [apb_timer] ecnt_timer_drv_probe [timer] ecnt_timer->irq: 80 [timer] res->name:/apb_timer1@1fbf0100 i2c_slave init(ecnt_i2c_slave_drv_probe) done [i2s] ecnt_i2s_drv_probe 7523 Thermal Sensor address probe done squashfs: version 4.0 (2009/01/31) Phillip Lougher exFAT: Version 1.2.9 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) PCIe driver version: 7523.0.20210201 PCIe ref clk init. ===EN7523 PCIe init mtk-pcie 1fa91000.pcie: Port0 link down mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success ===============PCIe check===tmp_reg=========81014c3=========== mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers enabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:02:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref] pci 0000:02:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 02] pci 0000:00:01.0: bridge window [mem 0x20000000-0x201fffff] mt7512_pcie_fixup: 0x2438 = 20000015 mt7512_pcie_rc1_retrain: 80 = 0145dc12 80 = 01608c12 RC1 Link Traing Result: 10120008 ===========RC1 set conf space INTx============= ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162 ECNT ring buffer init success brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6) Set SPI Clock to 50 Mhz spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x02000000 at 0x00000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01 nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 bmt pool size: 81 BMT & BBT Init Success Creating 11 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000004000000 : "whole" 0x000000000000-0x000000080000 : "boot" 0x000000080000-0x0000000a0000 : "romfile" 0x0000000a0000-0x0000001a0000 : "misc" 0x0000001a0000-0x0000009a0000 : "kernel" 0x0000009a0000-0x000002000000 : "rootfs" 0x0000001a0000-0x000002000000 : "firmware" 0x000002000000-0x000002800000 : "kernel_slave" 0x000002800000-0x000003e60000 : "rootfs_slave" 0x000002000000-0x000003e60000 : "firmware_slave" 0x000003fe0000-0x000004000000 : "reserve" rootfs PPP generic driver version 2.4.5 PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 register rtpci pci 0000:00:01.0: enabling device (0140 -> 0142) rtpci 0000:02:00.0: enabling device (0140 -> 0142) === pAd = d3201000, size = 9391104 === <-- RTMPAllocAdapterBlock, Status=0 PCI CSRBaseAddress =0xd3100000, csr_addr=0xd3100000! RTMPInitPCIeDevice():device_id=0x7915 mt7915_init()--> Use the default iPAiLNA bin image! <--mt7915_init() wdev_init(caller:RTMP_COM_IoctlHandle+0x1190/0x19d8), wdev(0) !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only <-- pci_alloc_tx_rx_ring_mem, Status=0 Error: host_notify_npuMbox timeout for core_id:0, func_id:0 WIFI_MAIL_API_GET_WAIT_COUNTER fail! USB driver version: 7523.3.20210202 port 0 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 port 1 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3316 buckets, 13264 max) ludewei add module gre: GRE over IPv4 demultiplexor driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler tc3162ser_startup squashfs: SQUASHFS error: unable to read id index table FAT-fs (mtdblock5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [EXFAT] trying to mount... VFS: Cannot open root device "mtdblock5" or unknown-block(31,5): error -5 Please append a correct "root=" boot option; here are the available partitions: 0100 4096 ram0 (driver?) 0101 4096 ram1 (driver?) 0102 4096 ram2 (driver?) 0103 4096 ram3 (driver?) 0104 4096 ram4 (driver?) 0105 4096 ram5 (driver?) 0106 4096 ram6 (driver?) 0107 4096 ram7 (driver?) 0108 4096 ram8 (driver?) 0109 4096 ram9 (driver?) 010a 4096 ram10 (driver?) 010b 4096 ram11 (driver?) 010c 4096 ram12 (driver?) 010d 4096 ram13 (driver?) 010e 4096 ram14 (driver?) 010f 4096 ram15 (driver?) 1f00 65536 mtdblock0 (driver?) 1f01 512 mtdblock1 (driver?) 1f02 128 mtdblock2 (driver?) 1f03 1024 mtdblock3 (driver?) 1f04 8192 mtdblock4 (driver?) 1f05 22912 mtdblock5 (driver?) 1f06 31104 mtdblock6 (driver?) 1f07 8192 mtdblock7 (driver?) 1f08 22912 mtdblock8 (driver?) 1f09 31104 mtdblock9 (driver?) 1f0a 128 mtdblock10 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,5) VFS: Unable to mount root fs on unknown-block(31,5) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.4.115 #1 Hardware name: ECONET (Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x94/0xa8) [] (dump_stack) from [] (panic_write2+0x58/0x60) [] (panic_write2) from [] (panic+0x84/0x210) [] (panic) from [] (mount_block_root+0x20c/0x298) [] (mount_block_root) from [] (prepare_namespace+0x184/0x1bc) [] (prepare_namespace) from [] (kernel_init_freeable+0x268/0x278) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe8) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) failed open file CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.115 #1 Hardware name: ECONET (Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x94/0xa8) [] (dump_stack) from [] (panic+0xa8/0x210) [] (panic) from [] (mount_block_root+0x20c/0x298) [] (mount_block_root) from [] (prepare_namespace+0x184/0x1bc) [] (prepare_namespace) from [] (kernel_init_freeable+0x268/0x278) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe8) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.115 #1 Hardware name: ECONET (Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x94/0xa8) [] (dump_stack) from [] (handle_IPI+0x188/0x1a4) [] (handle_IPI) from [] (gic_handle_irq+0x74/0x130) [] (gic_handle_irq) from [] (__irq_svc+0x54/0x70) Exception stack(0xcd43bf90 to 0xcd43bfd8) bf80: 00000000 cdfe5350 0000034e c009cda0 bfa0: cd438000 c0b11564 c0b07324 c0848818 cd43bfe8 c0ef3808 c0b115c4 00000000 bfc0: 0d4de000 cd43bfe0 c008b64c c008b650 60000013 ffffffff [] (__irq_svc) from [] (arch_cpu_idle+0x38/0x3c) [] (arch_cpu_idle) from [] (cpu_startup_entry+0x10c/0x188) [] (cpu_startup_entry) from [<8008960c>] (0x8008960c) Rebooting in 5 seconds.. EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  5  4  3  2  0 ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 905.3 KiB/s done Bytes transferred = 31850496 (1e60000 hex) ERROR: Unknown file name ! flash write 0x11a0000 0x$filesize $loadaddr write: src=0x84fc8f18, len=0x1e60000, dst=0x11a0000 .........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######r#############e################################s############## ##########e###############t##################### resetting ... ###### EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  0 ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 905.3 KiB/s done Bytes transferred = 31850496 (1e60000 hex) ERROR: Unknown file name ! flash write 0x11a0000 0x$filesize $loadaddr write: src=0x84fc8f18, len=0x1e60000, dst=0x11a0000 .........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ECNT> Start Tftp handler Using ecnt_eth device Listening for TFTP transfer on 192.168.1.1 Load address: 0x84fc8f18 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## 945.8 MiB/s done Bytes transferred = 22466560 (156d000 hex) ERROR: Unknown file name ! flash write 0x0000009a0000 0x$filesize $loadaddr write: src=0x84fc8f18, len=0x156d000, dst=0x9a0000 .....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ECNT> flash flash - flash - flash command Usage: flash flash usage: flash init flash erase [addr] [len] flash read [src] [len] *[dst] flash write [dst] [len] *[src] ECNT> flash erase 0x000002000000 31850496 erase: addr=0x2000000, len=0x31850496 [Error] Over Device Size : end_addr=0x33850496, device_size=0x8000000! ECNT>  ECNT> flash erase 0x000002000000 0x1E60000 erase: addr=0x2000000, len=0x1e60000 ECNT> reset resetting ... EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  5  4  3  2  1  0 Boot flag csum incorrect, return image0 Prepare to boot image0 Boot flag csum incorrect, return image0 bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'kernel@1' kernel subimage Description: ECONET Linux kernel Type: Kernel Image Compression: lzma compressed Data Start: 0x818022a4 Data Size: 4730117 Bytes = 4.5 MiB Architecture: ARM OS: Linux Load Address: 0x80088000 Entry Point: 0x80088000 Hash algo: sha1 Hash value: 71831c68c18b0d0ebe74b42ed8133ee86ccf6ce1 ## Loading fdt from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: ECONET Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x818002fc Data Size: 7913 Bytes = 7.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24 Booting using the fdt blob at 0x818002fc Uncompressing Kernel Image ... OK Loading Device Tree to 8cdf2000, end 8cdf6ee8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.115 (compile@342f0d6254c6) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Tue Mar 19 09:18:53 UTC 2024 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: econet,en7523 bootconsole [uart0] enabled Memory policy: Data cache writealloc psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. [c08472b8]npu_pkt_buf_addr=8dff37c0:8dff37c0 npu_pkt_buffer memblock_alloc:8dff37c0,buf_size=1600000 PERCPU: Embedded 12 pages/cpu @cdfd9000 s18048 r8192 d22912 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=D8:44:89:BD:CF:D8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 212276K/260864K available (8124K kernel code, 3998K rwdata, 2400K rodata, 240K init, 666K bss, 48588K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0088000 - 0xc0acf450 (10526 kB) .init : 0xc0ad0000 - 0xc0b0c000 ( 240 kB) .data : 0xc0b0c000 - 0xc0ef3980 (3999 kB) .bss : 0xc0ef6000 - 0xc0f9c8e0 ( 667 kB) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:64 nr_irqs:64 64 CPU0: found redistributor 0 region 0:0x09080000 Architected cp15 timer(s) running at 25.00MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 40ns console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80088280 - 0x800882d8 CPU1: found redistributor 1 region 0:0x090a0000 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (100.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. l2c_sram_size:0x0 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = cd579800 ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available sgmii probe init start sgmii:int_name: sgmii_pcie0 sgmii:int_id: 0 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d087c100 sgmii:sgmii->pcs2_base= d087ea00 sgmii:sgmii->an_base= d0944000 sgmii:sgmii->ra_base= d0946600 sgmii:sgmii->phya_base= d0948c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d087ea20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_pcie1 sgmii:int_id: 1 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d094a100 sgmii:sgmii->pcs2_base= d094ca00 sgmii:sgmii->an_base= d094e000 sgmii:sgmii->ra_base= d0950600 sgmii:sgmii->phya_base= d0952c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d094ca20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_usb0 sgmii:int_id: 2 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d0954100 sgmii:sgmii->pcs2_base= d0956a00 sgmii:sgmii->an_base= d0958000 sgmii:sgmii->ra_base= d095a600 sgmii:sgmii->phya_base= d095cc00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d0956a20, val=0 sgmii: sync_int exit sgmii probe init exit TC3162 hardware watchdog module loaded. irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [crypto_k] res->name:/crypto_k@1fb70000 [crypto_k] res->start:0x1fb70000 === [crypto_k] res->end:0x1fb70803 === [crypto_k] ecnt_crypto_k->base:0xd09dc000 [trng] ecnt_trng_drv_probe test_uc:d0826000 test_c:cd4c0000 cpu_top->base:d09e6800 [apb_timer] ecnt_timer_drv_probe [timer] ecnt_timer->irq: 80 [timer] res->name:/apb_timer1@1fbf0100 i2c_slave init(ecnt_i2c_slave_drv_probe) done [i2s] ecnt_i2s_drv_probe 7523 Thermal Sensor address probe done squashfs: version 4.0 (2009/01/31) Phillip Lougher exFAT: Version 1.2.9 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) PCIe driver version: 7523.0.20210201 PCIe ref clk init. ===EN7523 PCIe init mtk-pcie 1fa91000.pcie: Port0 link down mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success ===============PCIe check===tmp_reg=========81014c3=========== mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers enabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:02:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref] pci 0000:02:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 02] pci 0000:00:01.0: bridge window [mem 0x20000000-0x201fffff] mt7512_pcie_fixup: 0x2438 = 20000015 mt7512_pcie_rc1_retrain: 80 = 0145dc12 80 = 01608c12 RC1 Link Traing Result: 10120008 ===========RC1 set conf space INTx============= ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162 ECNT ring buffer init success brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6) Set SPI Clock to 50 Mhz spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x02000000 at 0x00000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01 nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 bmt pool size: 81 BMT & BBT Init Success Creating 11 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000004000000 : "whole" 0x000000000000-0x000000080000 : "boot" 0x000000080000-0x0000000a0000 : "romfile" 0x0000000a0000-0x0000001a0000 : "misc" 0x0000001a0000-0x0000009a0000 : "kernel" 0x0000009a0000-0x000002000000 : "rootfs" 0x0000001a0000-0x000002000000 : "firmware" 0x000002000000-0x000002800000 : "kernel_slave" 0x000002800000-0x000003e60000 : "rootfs_slave" 0x000002000000-0x000003e60000 : "firmware_slave" 0x000003fe0000-0x000004000000 : "reserve" rootfs PPP generic driver version 2.4.5 PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 register rtpci pci 0000:00:01.0: enabling device (0140 -> 0142) rtpci 0000:02:00.0: enabling device (0140 -> 0142) === pAd = d3201000, size = 9391104 === <-- RTMPAllocAdapterBlock, Status=0 PCI CSRBaseAddress =0xd3100000, csr_addr=0xd3100000! RTMPInitPCIeDevice():device_id=0x7915 mt7915_init()--> Use the default iPAiLNA bin image! <--mt7915_init() wdev_init(caller:RTMP_COM_IoctlHandle+0x1190/0x19d8), wdev(0) !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only <-- pci_alloc_tx_rx_ring_mem, Status=0 Error: host_notify_npuMbox timeout for core_id:0, func_id:0 WIFI_MAIL_API_GET_WAIT_COUNTER fail! USB driver version: 7523.3.20210202 port 0 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 port 1 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3316 buckets, 13264 max) ludewei add module gre: GRE over IPv4 demultiplexor driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler tc3162ser_startup squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored squashfs: SQUASHFS error: unable to read xattr id index table VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Freeing unused kernel memory: 240K busybox init and set aff starting pid 444, tty '': '/etc/init.d/rcS' insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directory usbcore: registered new interface driver usb-storage insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory tp_board: loading out-of-tree module taints kernel. Register flash device: flash0 rcS (444): drop_caches: 3 start XPON related APP /tmp/cfg_load is not exist,left time 30 svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so svchost_parse_print_conf: Entry = svc_cfg_main svchost_parse_print_conf: Param = 111 random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) shm_pool_init: base[20000000] size[00200000]] shm_pool_init: Init Done! random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) svc_cfg_start: ........ Load cfg from file [/var/romfile.cfg] ..... tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> gic tar: short read cp: can't s[check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> tat '/tmp/ctromfile.cfg': No such file or directory Use backup romfile to check! Couldn't open mtd:reservearea! mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288 Unlocking reservearea ... Could not open mtd device: reservearea [BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> gic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use default romfile to check! mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432 Unlocking reservearea ... Could not open mtd device: reservearea [DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> gic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use usrfs romfile to check! mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea /tmp/cfg_load is not exist,left time 29 ctromfile.cfg <> mtd[readflash]:device=reservearea tclen=2120 tcoffse[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. t=1310720 Unlocking reservearea ... Could not open mtd device: reservearea handle_proline_paras 1564 SSID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ha[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ndle_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. roline[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. _paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 1564 [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. WPAPSK[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. :12345[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 678. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. hanrandom: ubusd: uninitialized urandom read (4 bytes read, 54 bits of entropy available) dle_pro[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. line_[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 1564random: ubusd: uninitialized urandom read (4 bytes read, 58 bits of entropy available) SSID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. handle_proline_paras 1564 WPAPSK:12345678. random: ubusd: uninitialized urandom read (4 bytes read, 60 bits of entropy available) handle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 web_passwd:1234. handle_proline_paras 1564 SerialNumber:FHTT12345678. parse proline para Password fail. parse proline para Password fail. handle_proline_paras 1564 Mode:GPON. root.mesh.apclibh.entry.1:BhProfileSsid not found. root.mesh.apclibh.entry.1:BhProfileWpaPsk not found. root.mesh.apclibh.entry.2:BhProfileSsid not found. root.mesh.apclibh.entry.2:BhProfileWpaPsk not found. handle_proline_paras 1564 (null):1. cfg_save_object: open file [/tmp/var/romfile.cfg] fail ----> Load config file fail. svc_cfg_start: ........ ok [20001030]! svchost_get_event_val: get param fail [0] start omci svchost_prandom: ubusd: uninitialized urandom read (4 bytes read, 74 bits of entropy available) arse_print_conf: Path = /lib/libpon_svc.so svchost_parse_print_conf: Entry = svc_pon_main svchost_parse_print_conf: Param = 111 module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint ecnt_register_cpu_interruptssvchost_p random: ubusd: uninitialized urandom read (4 bytes read, 76 bits of entropy available) arse_print_conf: Path = /lib/libcentral_ctrl_svc.so svchost_parse_print_conf: Entry = svc_central_ctrl_main svchost_parse_print_conf: Param = 111 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Mar 19 2024-09:20:52). led path:/userfs/7529_62led.conf random: ubusd: uninitialized urandom read (4 bytes read, 78 bits of entropy available) svc_pon_int: ...... reg event ok svc_pon_int: ...... reg method ok svchost_get_event_val: get param fail [0] cfg svc load done, 0 ms [svc_cfg_load_special_info][581]SET [omci_lib_set_max_ports_list] Result=0 Couldn't open mtd:reservearea! mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf tccicmd V1.1.0.0 (Mar 19 2024-09:20:58) ERROR!Create /etc/fwTCver.conf fail! [svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Crandom: ubusd: uninitialized urandom read (4 bytes read, 90 bits of entropy available) ould not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can SIFMaster 0.1 init ===== Interface 0 is ON ===== Register sifm cmd 't openrandom: ubusd: uninitialized urandom read (4 bytes read, 94 bits of entropy available) /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea mtd[readflash]:device=resersvc_centrl_ctrl_init: ...... reg event ok veareadev mount is start! tcconfig le0 n=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can'tnlksock_create:nlksock create err:Protocol not supported! opactive_notify_handler: nlksock_create fail en /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][661]SET [oam_lib_set_ha(gdump_mode_sel): GDUMP sel has switch to 3 ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215 rdware_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0 insmod: can't insert '/lib/modules/crypto_k.ko': No such file or directory svchost_get_event_val: get param fail [0] PID=551 event receive pthread_create OK, keep going...... mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/difc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 random: nonblocking pool is initialized ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:3 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:7 eifc_set_action: cpu:1, nbq:8 viceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0 mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory TP_User Ecnt ponTime:OMCI Startup macType = 0 flashQdmaInit = 0x33 netif_napi_add() called with weight 256 on device lan_int2_if ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: D8:44:89:BD:CF:D8 Use Internal switch ,type 10 tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9 GE Rext AnaCal Done! (7)(0x27) GE Rext AnaCal Done! (7)(0x27) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (5)(0x24) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (8) (0x28) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (14) (0x2e) [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) Unlocking config ... Could not open mtd device: config GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (5)(0x24) GE Tx amp AnaCal Done! (1) (0x21) GE Tx amp AnaCal Done! (7) (0x27) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (15) (0x2f) [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE Tx offset AnaCal Done! (3)(0x22) GE Tx offset AnaCal Done! (9)(0x28) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (6)(0x25) GE Tx amp AnaCal Done! (11) (0x2b) GE Tx amp AnaCal Done! (9) (0x29) GE Tx amp AnaCal Done! (17) (0x31) GE Tx amp AnaCal Done! (12) (0x2c) [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (2)(0x21) GE Tx amp AnaCal Done! (2) (0x22) GE Tx amp AnaCal Done! (11) (0x2b) GE Tx amp AnaCal Done! (2) (0x22) GE Tx amp AnaCal Done! (13) (0x2d) [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) eth0: starting interface. netif_start_queue macType = 0 flashQdmaInit = 0x33 fe resource init start 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left not found str : MAP, erase and mount again dev_mount is ok 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left mount: can't find /dev/mtdblock in /etc/fstab Ralink HW NAT Module Enabled you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512 HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384 IP check use Black List EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw [c0847268]isForceToCpu=0:0 copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xd0f00000 copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xd0b80000 [C0]core freq at 333000000 Hz [C0]timer_init: Timer clk is running at 125 Mhz [C0]wcid_counter_init:0 [C0]wcid_counter_init:1 [C0][NPU] ba_node_init... [C0]baNode_array_init [C0]counter_init:2 [C0][NPU] queue_mutex_init... [C0]qdma_init [C1]core1_main [C2]timer_isr Store Value 1e903000, val[C2]core2_main [C3]core3_main [C3]do npu_enq_deq_init [c0847244]npu_pkt_buf_addr=8dff37c0 npu_wifi_offload_get_pkt_buf_addr=8dff37c0 [c0847244]npu_pkt_buf_addr=8dff37c0 [C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=8dff37c0, 8dff37c0 npu_wifi_offload_get_force_to_cpu_flag=0 isForceToCpu=0 [C0](core0_main) just return, because QDMA driver for ARM is not ready whnat_module_init(): module init and register callback for whnat create whnat_ctrl ok!!! wed_slot_map_get(): assign slot_id:0 for entry: 0! wed_slot_map_get(): assign slot_id:1 for entry: 1! tso_lan: tso_v2.c [201]: dscpDmaAddr =89ed0000 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_proc_init. val_string:add v4 - 445 - - dport:0, sport:445, daddr:0, saddr:0 ---- 7570_bob.conf ---- ---- cp -f /etc/7570_bob.conf /tmp/ ---- do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=17 data[1]=04 data[2]=30 data[3]=04 do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success! ---- flashtool readflashtobob ---- ______ XPON_PHY init ______ little endian NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0 xPON PHY initialization done E3 patched EN7571 found! FLASH matrix got PWRADC offset = 0x33be PWRADC ready BG 1.76V = 0x285 BG 0.875V = 0x141 RSSI_Vref = 0x210 RSSI_V = 0x29a eFuse value = 0xe eFuse offset = 4.2'C Start GPON Tx Calibration CDR disabled RGS_T0C = 0x42 RGS_T1C = 0x43 CDR enabled APD initialization done en7571_reg_init Initial current loaded PWR/ER loaded TIASD = 0x24 Rx LOS is set Internal DDMI Enabled KT Enabled EN7571 Initialization Done! PON PHY driver version is 2100825.116.11 xPON driver initialization Alloc data struct memory successful, 36508 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 XPON Mapping Module init OK! vtag_drv_init tc_multiwan version: tcsmux V1.1.0.0 (Mar 19 2024-09:21:03). pon_vlan_init Multi Lan port initilize xpon igmp module....done! pon_mac_filter_init Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon PPTP VPN offload module init _multicast.ko': No such file or directory L2TP VPN offload module init device eth0 entered promiscuous mode device eth0.1 is not a slave of br0 device eth0.2 is not a slave of br0 device eth0.3 is not a slave of br0 device eth0.4 is not a slave of br0 device eth0 is already a member of a bridge; can't enslave it to bridge br0. device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready device eth0.1 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready device eth0.2 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready device eth0.3 entered promiscuous mode device eth0.4 is not a slave of br0 ifconfig: ioctl 0x8913 failed: No such device interface eth0.5 does not exist! insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory ifconfig: SIOCSIFMTU: Invalid argument vlan tag restore switch : enable insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory start ponmgr_cfg MTK DSP support rcS (444): drop_caches: 3 set pptp_offload proto value 1 rcS.sdk init done! creat_domain_proc ok tp_domain init ok VoIPBasic_Common SIPProtocol is SIP prevSipStatus: 0, curSipStatus: 0 voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0 [1970-1-1 Thu 00:00:15.486147]omci start! [1970-1-1 Thu 00:00:15.490573]main gponOmciCmsgsrvInit device recognition register success [1970-1-1 Thu 00:00:15.524477]OMCI wait for DM init... status: DSPCore[Ver:TVB1.0.23.800-4-P102-1] [1] PCM V2.4 (Dec 18 2023 23:20:57) bind irq-113 to CPU1 PCM_INT=28 pcm[Ver:TVB1.0.23.800-4-P102-1] lec[Ver:TVB1.0.23.800-4-P102-1] SYS_HCLK=250 Major Num:233, device: spi spi[Ver:TVB1.0.23.800-4-P102-1] [16.050][cos] 422 - ERROR: before cpu mask 00000003 [16.072][cos] 437 - ERROR: after cpu mask 00000001 ========fxs3 init start======== ========fxs3 init complete======== . init mod-slic3 slic3[Ver:TVB1.0.23.800-1] mode= ISI init mod-ksocket ksocket[Ver:TVB1.0.23.800-1] monitor value xxxxxxx ortp[Ver:TVB1.0.23.800-4-P102-1] init mod-acodec acodec[Ver:TVB1.0.23.800-4-P102-1] ponTime:ONU Ready init mod-foip3 foip3[Ver:TVB1.0.23.800-4-P102-1] mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea ponTime:Connection Start working_mode: 10 [42949389990ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0 ==> EPON OAM Start need 1s:4294144451us Interface name length cannot exceed 15 characters. Interface name length cannot exceed 15 characters. Silabs SLIC type selected by SW makefile compile option [4294939007][slic][INFO][gpio_clocksrc_init:L2399]ISI [4294939008][spi][INFO][SPI_Reset:L473] SPI_Reset 2 slic deviceVerify ProSLIC_Version 9.1.0 Silabs SLIC Reset REG_0 = 0xaa ,device[0], Part_num 0x5, Revision 0x2 device[0]:deviceVerify Success! SPI Reset times:1 pcm1 ch num:1 pcm2 ch num:0 fxs[Ver:TVB1.0.23.800-4-P102-1] [fxs_init_action](1344)noinit=0 pcm1 ch num:1 pcm2 ch num:0 Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1) deviceInit on DeviceId = 0 ProSLIC_createControlInterface = 0 ProSLIC_createDevice = 0 get_start_chanid=0 ProSLIC_createChannel = 0 ProSLIC_SWInitChan = 0 device [0] chanPvt[0].chanType 1 device [0] chanPvt[0].chipType 6 Si3218x_Init_with_Options(640) size = 1 init_opt = 0 SiVoice: Channel 0: Type = PROSLIC Rev = 2 ProSLIC:loading patch: 06302015 . Si3218x: Channel 0 : VBAT Up = 58.789 v [42949391000ms][phy_init.c:1946] PON PHY scu_reset_init mode=10 [42949391000ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1 [42949391000ms][phy_init.c:1946] PON PHY scu_reset_init mode=1 [42949391020ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1 Auto GPON ProSLIC:Starting LB Cal on channel 0 .init mod-vdsp for 1 channels 2 sessions vdsp[Ver:TVB1.0.23.800-4-P102-1] =============================== || MTK DSP init successfully || =============================== pid 2's current affinity mask: 3 pid 887's current affinity mask: 1 IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready ___ COUNTRY SETTING ___ ring_idx : 0 imp_idx : 0 ProSLIC:PCMStart slic_set_gainLv - fffffffa / 0 pid 887's new affinity mask: 2 fxsSetLine[0]state 0x9 State UNKNOWN ! pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 1081'Dump SLIC[0] register: ================================= 00 01 02 03 04 05 06 07 08 09 s================================= 00: aa 00 00 1f 00 40 00 a2 e5 ff 10: 25 13 00 00 00 20 00 00 00 00 20: 00 00 00 02 00 00 00 00 00 00 30: 11 00 00 10 00 00 00 02 00 40 40: 1f 00 7d 00 00 59 04 10 66 00 50: 00 00 00cu 00 00 00 00 00 ff 00 60: 00 00 e4 00 00 00 00 00 f0 00 70: 00 00 00 00 00 00 02 00 00 00 80: 3f 01 b7 03 af 05r 0e 0f ed 10 90: 40 07 9f 06 c1 11 24 05 80 01 100: 00 01 00 00 00 00 00 00 00 00 110: 00 00 47 01 a5 00 02 ff 38r 00 120: 87 0f 87 05 00 20 03 00 ================================= ent afwrite address(47) value : 0x8 finity mask: 1 pid 1081's new affinity mask: 2 [20.892][cos] 317 - ERROR: checkMiscSize: MTD_OFS_PC_HISTORY_ADDR(3e60000) + MTD_OFS_PC_HISTORY_SIZE(60000) = (3ec0000) /etc/init.d/rcS: line 195: can't create /proc//oom_score_adj: nonexistent directory rcS (444): drop_caches: 3 rcS init done! Please press Enter to activate this console. sleep 90s! [21.299][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml [22.098][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002 [22.Disable GPON ONU 102][cos] 715 - ERROR: Disable gpon driver before true SN set [22.107][cos] 253 - ERROR: COS wait for OMCI init... [22.108][cos] 259 - ERROR: OMCI init use 0 seconds! ===========>manufacture:0, ISPflag:0 IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 interface eth0.5 does not exist! device eth0.1 entered promiscuous mode [1970-1-1 Thu 00:00:22.740155]DM init use 7 seconds! [1970-1-1 Thu 00:00:22.746513]OMCI wait for RSL init... device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready device eth0.4 entered promiscuous mode ifconfig: ioctl 0x8913 failed: No such device sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory interface eth0.5 does not exist! br_agc: port 2(eth0.2) entered forwarding state br_agc: port 2(eth0.2) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br_agc: link becomes ready updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 sendto: No such file or directory line(593) Msg.type(2014) pid(859) errno(2) ret(-1) [ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf [25.020][cos] 121 - ERROR: CQC:tm_start:25, tm_end:25 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [27.030][cos] 121 - ERROR: CQC:tm_start:25, tm_end:27 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [29.040][cos] 121 - ERROR: CQC:tm_start:25, tm_end:29 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [31.050][cos] 121 - ERROR: CQC:tm_start:25, tm_end:31 [31.050][cos] 137 - ERROR: CQC:FAILED! [31.050][cos] 775 - ERROR: Expire time! device eth0.1 left promiscuous mode br_agc: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br_agc: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br_agc: port 3(eth0.3) entered disabled state device eth0.4 left promiscuous mode br_agc: port 4(eth0.4) entered disabled state interface eth0.5 does not exist! [31.372][cmm] 591: num of CPU core = 2. [31.373][cmm] 601: parent pid 859 [31.476][cmm] 608: start creating dropbear RSA key at CPU core 1. [31.477][cmm] 618: child pre cpu mask 00000001 [31.477][cmm] 632: child post cpu mask 00000002 [31.478][cmm] 636: Try create dropbear RSA key loop=0 ... [31.632][cmm] 3192 - ERROR: Open TZ file error! Generating 2048 bit rsa key, this may take a while... ddns_ud> start enable = 0, server: , auth: , request killall: dnsmasq: no process killed [32.098][cmm] 158 - WARN: Empty DNSServer() [32.293][cmm] 158 - WARN: Empty DNSServer() [32.328][cmm] 158 - WARN: Empty DNSServer(0.0.0.0,0.0.0.0) bridge name br0 has exist bridge name br0 has exist device br0 already exists; can't create bridge with the same name IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready done [32.617][cmm] 203 - ERROR: ifName is eth0, vid is 5 [32.639][cmm] 203 - ERROR: ifName is eth0, vid is 4 vconfig: ioctl error for add: File exists [32.652][cmm] 203 - ERROR: ifName is eth0, vid is 3 vconfig: ioctl error for add: File exists [32.665][cmm] 203 - ERROR: ifName is eth0, vid is 2 vconfig: ioctl error for add: File exists [32.677][cmm] 203 - ERROR: ifName is eth0, vid is 1 vconfig: ioctl error for add: File exists [32.690][cmm] 203 - ERROR: ifName is eth0, vid is 0 sh: can't create /proc/tplink/eth_vlan: nonexistent directory device eth0.1 entered promiscuous mode [32.825][cmm] 257 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName: Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [32.845][ipv6] 1015 - WARN: Could not find pid of dibbler-server with interface name is br0! [32.850][ipv6] 619 - ERROR: Can't find interface: br0 [32.861][ipv6] 1380 - WARN: Could not find pid of radvd with interface name is br0! device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready device eth0.3 entered promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state br0: port 2(eth0.2) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state br0: port 3(eth0.3) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 device eth0 entered promiscuous mode br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode device eth0.5 is not a slave of br0 iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. [33.534][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public [33.534][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next. [33.535][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public [33.535][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next. [33.536][cmm] 2023 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0 ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ra0: ===> main_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT load l1profile succeed! WHNAT=1 whnat_cap_support(): chip_id=7915 is in WHNAT support list wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 wed_init(1): irq=91,base_addr=0xd57bc000 ----->wed_tx_ring_init() 805 len=40 ----->wed_tx_ring_init() 816 len=98376 sizeof(whnat_ring)=49188, ring_ctrl->ring_num=2 tx_ring_init() whnat_dma_buf_alloc for glb_ring_ctrl_desc[0]=32768 tx_ring_init() whnat_dma_buf_alloc for glb_ring_ctrl_desc[1]=32768 wed_ring_init(): wed ring init result = 0 token_info_init() whnat_dma_buf_alloc for glb_wed_buf_res=114688 whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]=917504 ---------> token_info_alloc() len=372736, eid=7168, sizeof(struct wed_token_info)=52 skb_len=1900 create wed ok!!! wdma_init(): wdma(1) base addr=d58ce400 wdma_init(): wdma(1) irq[0]=87 wdma_init(): wdma(1) irq[1]=88 wdma_init(): wdma(1) irq[2]=89 rx_ring_init() whnat_dma_buf_alloc for glb_wdma_rx_ring_ctrl[0]=16384 rx_ring_init() whnat_dma_buf_alloc for glb_wdma_rx_ring_ctrl[1]=16384 wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91 wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_probe(): probe fail since whnat is full! whnat_dev0: probe of 1fa02000.wed2 failed with error -1 mt_service_open: wlan service opens successfully! APWdsInitialize():WdsEntry[0~15] multi_profile_merge_radius_key:RTMPGetKeyParameter 717 fail![multi_profile_merge_5g_only] DBDC_MODE=1 multi-profile merge success, en:1,pf1_num:7,pf2_num:7,total:14 Open file "/var/Wireless/RT2860AP/DBDC_card0.dat" to store DBDC cfg! (23) Write file "/var/Wireless/RT2860AP/DBDC_card0.dat" success (size=8228)! BssidNum=14 Pf2MbssIdxMap: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 MacAddress7 = 00:00:00:00:00:00 E2pAccessMode=2 SSID[0]=TP-Link_CFD8, EdcaIdx=0 SSID[1]=TP-Link_CFD8_1, EdcaIdx=0 SSID[2]=TP-Link_CFD8_2, EdcaIdx=0 SSID[3]=TP-Link_CFD8_Guest, EdcaIdx=0 SSID[4]=26e3d8a1df367885e74acba9a98bad, EdcaIdx=0 SSID[5]=aa9a343d07a79aa66ef85877e21dee, EdcaIdx=0 SSID[6]=e2b6520c958f5e14820332d7ee1a39, EdcaIdx=0 SSID[7]=TP-Link_CFD8, EdcaIdx=0 SSID[8]=TP-Link_CFD8_1, EdcaIdx=0 SSID[9]=TP-Link_CFD8_2, EdcaIdx=0 SSID[10]=TP-Link_CFD8_Guest, EdcaIdx=0 SSID[11]=1b34392d9f7a4e17d86ba5fb123da0, EdcaIdx=0 SSID[12]=c6e19271450d7592b4d756a75474eb, EdcaIdx=0 SSID[13]=895292acce55edb97159c9a0006ea6, EdcaIdx=0 RTMPSetProfileParameters(): DBDC Mode=1, eDBDC_mode = 1 cfg_mode=16 cfg_mode=16 cfg_mode=16 wmode_band_equal(): Band Equal! cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 auto_ch_select_set_cfg(): BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: Index0 Channel=1 RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: Index1 Channel=36 BndStrgBssIdx=1;0;0;0;0;0;0;1;0;0;0;0;0;0 [TxPower] BAND0: 100, BAND1: 100 [SKUenable] BAND0: 1, BAND1: 1 [PERCENTAGEenable] BAND0: 1, BAND1: 1 profile: FragThreshold[0]=2346 profile: FragThreshold[1]=2346 profile: FragThreshold[2]=2346 profile: FragThreshold[3]=2346 profile: FragThreshold[4]=2346 profile: FragThreshold[5]=2346 profile: FragThreshold[6]=2346 profile: FragThreshold[7]=2346 profile: FragThreshold[8]=2346 profile: FragThreshold[9]=2346 profile: FragThreshold[10]=2346 profile: FragThreshold[11]=2346 profile: FragThreshold[12]=2346 profile: FragThreshold[13]=2346 APEdca0 Valid=1 APAifsn[0]=3 APAifsn[1]=7 APAifsn[2]=1 APAifsn[3]=1 APEdca1 Valid=1 APAifsn[0]=3 APAifsn[1]=7 APAifsn[2]=1 APAifsn[3]=1 APEdca2 APEdca3 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 UAPSDCapable[0]=0 UAPSDCapable[1]=0 UAPSDCapable[2]=0 UAPSDCapable[3]=0 UAPSDCapable[4]=0 UAPSDCapable[5]=0 UAPSDCapable[6]=0 UAPSDCapable[7]=0 UAPSDCapable[8]=0 UAPSDCapable[9]=0 UAPSDCapable[10]=0 UAPSDCapable[11]=0 UAPSDCapable[12]=0 UAPSDCapable[13]=0 default ApCliUAPSDCapable[0]=0 default ApCliUAPSDCapable[1]=0 DfsZeroWait Support=0/0 DfsZeroWaitCacTime=255/255 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[0] read_itxbf: MBSS[0] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[1] read_itxbf: MBSS[1] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[2] read_itxbf: MBSS[2] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[3] read_itxbf: MBSS[3] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[4] read_itxbf: MBSS[4] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[5] read_itxbf: MBSS[5] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[6] read_itxbf: MBSS[6] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[7] read_itxbf: MBSS[7] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[8] read_itxbf: MBSS[8] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[9] read_itxbf: MBSS[9] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[10] read_itxbf: MBSS[10] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[11] read_itxbf: MBSS[11] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[12] read_itxbf: MBSS[12] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[13] read_itxbf: MBSS[13] ITxBfEn = 1 read_itxbf: Common.ITxBfEn = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[0] read_etxbf: MBSS[0] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[1] read_etxbf: MBSS[1] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[2] read_etxbf: MBSS[2] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[3] read_etxbf: MBSS[3] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[4] read_etxbf: MBSS[4] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[5] read_etxbf: MBSS[5] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[6] read_etxbf: MBSS[6] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[7] read_etxbf: MBSS[7] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[8] read_etxbf: MBSS[8] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[9] read_etxbf: MBSS[9] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[10] read_etxbf: MBSS[10] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[11] read_etxbf: MBSS[11] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[12] read_etxbf: MBSS[12] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[13] read_etxbf: MBSS[13] ETxBfEnCond = 1 MBSS[0] MuOfdmaDlEnable = 0 MBSS[1] MuOfdmaDlEnable = 0 MBSS[2] MuOfdmaDlEnable = 0 MBSS[3] MuOfdmaDlEnable = 0 MBSS[4] MuOfdmaDlEnable = 0 MBSS[5] MuOfdmaDlEnable = 0 MBSS[6] MuOfdmaDlEnable = 0 MBSS[7] MuOfdmaDlEnable = 0 MBSS[8] MuOfdmaDlEnable = 0 MBSS[9] MuOfdmaDlEnable = 0 MBSS[10] MuOfdmaDlEnable = 0 MBSS[11] MuOfdmaDlEnable = 0 MBSS[12] MuOfdmaDlEnable = 0 MBSS[13] MuOfdmaDlEnable = 0 MBSS[0] MuOfdmaUlEnable = 0 MBSS[1] MuOfdmaUlEnable = 0 MBSS[2] MuOfdmaUlEnable = 0 MBSS[3] MuOfdmaUlEnable = 0 MBSS[4] MuOfdmaUlEnable = 0 MBSS[5] MuOfdmaUlEnable = 0 MBSS[6] MuOfdmaUlEnable = 0 MBSS[7] MuOfdmaUlEnable = 0 MBSS[8] MuOfdmaUlEnable = 0 MBSS[9] MuOfdmaUlEnable = 0 MBSS[10] MuOfdmaUlEnable = 0 MBSS[11] MuOfdmaUlEnable = 0 MBSS[12] MuOfdmaUlEnable = 0 MBSS[13] MuOfdmaUlEnable = 0 MBSS[0] MuMimoDlEnable = 1 MBSS[1] MuMimoDlEnable = 1 MBSS[2] MuMimoDlEnable = 1 MBSS[3] MuMimoDlEnable = 1 MBSS[4] MuMimoDlEnable = 1 MBSS[5] MuMimoDlEnable = 1 MBSS[6] MuMimoDlEnable = 1 MBSS[7] MuMimoDlEnable = 1 MBSS[8] MuMimoDlEnable = 1 MBSS[9] MuMimoDlEnable = 1 MBSS[10] MuMimoDlEnable = 1 MBSS[11] MuMimoDlEnable = 1 MBSS[12] MuMimoDlEnable = 1 MBSS[13] MuMimoDlEnable = 1 MBSS[0] MuMimoUlEnable = 1 MBSS[1] MuMimoUlEnable = 1 MBSS[2] MuMimoUlEnable = 1 MBSS[3] MuMimoUlEnable = 1 MBSS[4] MuMimoUlEnable = 1 MBSS[5] MuMimoUlEnable = 1 MBSS[6] MuMimoUlEnable = 1 MBSS[7] MuMimoUlEnable = 1 MBSS[8] MuMimoUlEnable = 1 MBSS[9] MuMimoUlEnable = 1 MBSS[10] MuMimoUlEnable = 1 MBSS[11] MuMimoUlEnable = 1 MBSS[12] MuMimoUlEnable = 1 MBSS[13] MuMimoUlEnable = 1 [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=3, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=4, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=5, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=6, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=7, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=8, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=9, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=10, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=11, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=12, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=13, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=3, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=4, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=5, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=6, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=7, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=8, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=9, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=10, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=11, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=12, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=13, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=3, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=4, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=5, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=6, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=7, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=8, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=9, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=10, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=11, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=12, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=13, Desired PMFSHA256=0 ReadMboParameterFromFile::(bMboEnable[0]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[1]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[2]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[3]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[4]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[5]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[6]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[7]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[8]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[9]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[10]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[11]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[12]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[13]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[0]=1) ReadMboParameterFromFile::(bMboEnable[1]=1) MAP_MODE=3 ApCliEntry[0].Enable=0 ApCliEntry[1].Enable=0 IGMP deny list [0]-th entry =224.0.0.1 IGMP deny list [1]-th entry =224.0.0.2 IGMP deny list [2]-th entry =224.0.0.4 IGMP deny list [3]-th entry =224.0.0.5 IGMP deny list [4]-th entry =224.0.0.6 IGMP deny list [5]-th entry =224.0.0.7 IGMP deny list [6]-th entry =224.0.0.8 IGMP deny list [7]-th entry =224.0.0.9 IGMP deny list [8]-th entry =224.0.0.12 IGMP deny list [9]-th entry =224.0.0.16 IGMP deny list [10]-th entry =224.0.0.17 IGMP deny list [11]-th entry =224.0.0.22 IGMP deny list [12]-th entry =224.0.0.251 IGMP deny list [13]-th entry =224.0.0.252 IGMP deny list [14]-th entry =232.0.0.100 IGMP deny list [15]-th entry =239.255.12.42 IGMP deny list [16]-th entry =239.255.255.250 rtmp_read_wds_from_file(): WDS Profile WDS Number: band[0]=0, band[1]=0 WDS-Enable mode=0 WDS-Enable mode=0 HT_BAWinSize: wdev[0]: (TX=256, RX=256) HT_BAWinSize: wdev[1]: (TX=256, RX=256) HT_BAWinSize: wdev[2]: (TX=256, RX=256) HT_BAWinSize: wdev[3]: (TX=256, RX=256) HT_BAWinSize: wdev[4]: (TX=256, RX=256) HT_BAWinSize: wdev[5]: (TX=256, RX=256) HT_BAWinSize: wdev[6]: (TX=256, RX=256) HT_BAWinSize: wdev[7]: (TX=256, RX=256) HT_BAWinSize: wdev[8]: (TX=256, RX=256) HT_BAWinSize: wdev[9]: (TX=256, RX=256) HT_BAWinSize: wdev[10]: (TX=256, RX=256) HT_BAWinSize: wdev[11]: (TX=256, RX=256) HT_BAWinSize: wdev[12]: (TX=256, RX=256) HT_BAWinSize: wdev[13]: (TX=256, RX=256) HT: WDEV[0] Ext Channel = BELOW HT: WDEV[1] Ext Channel = BELOW HT: WDEV[2] Ext Channel = BELOW HT: WDEV[3] Ext Channel = BELOW HT: WDEV[4] Ext Channel = BELOW HT: WDEV[5] Ext Channel = BELOW HT: WDEV[6] Ext Channel = BELOW HT: WDEV[7] Ext Channel = BELOW HT: WDEV[8] Ext Channel = BELOW HT: WDEV[9] Ext Channel = BELOW HT: WDEV[a] Ext Channel = BELOW HT: WDEV[b] Ext Channel = BELOW HT: WDEV[c] Ext Channel = BELOW HT: WDEV[d] Ext Channel = BELOW 0:ra0 TWTsupport = 0 1:(null) TWTsupport = 0 2:(null) TWTsupport = 0 3:(null) TWTsupport = 0 4:(null) TWTsupport = 0 5:(null) TWTsupport = 0 6:(null) TWTsupport = 0 7:(null) TWTsupport = 0 8:(null) TWTsupport = 0 9:(null) TWTsupport = 0 10:(null) TWTsupport = 0 11:(null) TWTsupport = 0 12:(null) TWTsupport = 0 13:(null) TWTsupport = 0 rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect [35.461][cmm] 648: create dropbear RSA key success. [35.461][cmm] 655: start creating dropbear DSS key at CPU core 1. [35.46pAd->reg_domain = 1 1][cmm] 659: Try create dropbear DSS key loop=0 ... Generating 1024 bit dss key, this may take a whileWtcSetMaxStaNum: MaxStaNum:224, BssidNum:14, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:273 .Top Init Done! Use dev_alloc_skb token_tx_queue_init(): ct sw token number = 1023 token_tx_queue_init(): token que inited done!id_head/tail=0/1024 token_tx_queue_init(): cafb7204,cafb7204 token_rx_init(): alloc mem for glb_var_wifi_rx_q_token_idx1. size:64*15360=983040 .. TxRing[0]: attr:0, total 2048 entry initialized TxRing[1]: attr:0, total 2048 entry initialized DriverModel=1 !!!! do phy and virtual address mapping dramBaEntry_pa=86e00000 PCIE Port0 link down [C0][NPU] npu_set_pcie_base, addr=200d4500, band_idx=0 [C0][npu_set_pcie_base] 2.4G pcieBase 200d4500 mem_base 200d4500, hw_rx_desc=0 PCIE Port1 link up [C0][NPU] npu_set_pcie_base, addr=200d4510, band_idx=1 [C0][npu_set_pcie_base] 5G pcieBase 200d4510 mem_base 200d4510, hw_rx_desc=0 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7915D_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:0 [C0][NPU] Enter(2.4G) npu_npu_init_rxd, band_idx=0, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020 AllocSize 6000 AllocVa d5cee020, .AllocPa 1e806020 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7915D_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:1 [C0][NPU] Enter npu_npu_init_rxd_5G, band_idx=1, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000 AllocSize 6000 AllocVa d5cf2000, .AllocPa 1e800000 RX[2] DESC d1042000 size = 8192 RX[3] DESC d1045000 size = 16384 RX[4] DESC d104a000 size = 8192 register rx data done task cc613154 =====>register 2G hostdapt_registe_wifitask 0 =====>register 5G hostdapt_registe_wifitask 1 -->TX_RING_0[0xd7300]: Attr:0, Base=0x8c620000, Cnt=2048! -->TX_RING_1[0xd7310]: Attr:0, Base=0x8c628000, Cnt=2048! -->TX_RING_2[0xd5400]: Attr:3, Base=0x8c616000, Cnt=128! -->TX_RING_3[0xd5410]: Attr:2, Base=0x8c617000, Cnt=256! -->TX_RING_4[0xd5440]: Attr:1, Base=0x8c618000, Cnt=256! -->RX_RING_0[0xd4500]: Base=0x1e806020, Cnt=1536 -->RX_RING_1[0xd4510]: Base=0x1e800000, Cnt=1536 -->RX_RING_2[0xd5500]: Base=0x8c638000, Cnt=512 -->RX_RING_3[0xd7410]: Base=0x8c78c000, Cnt=1024 -->RX_RING_4[0xd5520]: Base=0x8bda8000, Cnt=512 wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 Hif Init Done! pci_driver_own_by_port: success to clear p=0 fw own, from(1): 1 is interrupt mode, 2 is polling mode. driver_own: port=1 is not enabled fw_prepare():using E2 ROM patch fw_prepare():using E2 RAM Parsing patch header Built date: 20230828104359a Platform: ALPS HW/SW version: 0x8a108a10 Patch version: 0xffffffff Section num: 0x2, subsys: 0x4 Section 0: type = 0x30002, offset = 0xe0, size = 0xfc90 Target address: 0x200000, length: 0xfc90 Section 1: type = 0x30002, offset = 0xfd70, size = 0x13730 Target address: 0xe000f000, length: 0x13730 Patch SEM Status = 2 [ read_dhpatch is not ready && get semaphore success Start address = 0x200000, DL length = 64656, Data mode = 0x80000000 cpc_config ] 1EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) 28: Start address = 0xe000f000, DL length = 79664, Data mode = 0x80000000 error, unableEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) to oMtCmdPatchFinishReq pen config file: /var/tmp/dconf/udhcpc.confEventGenericEventHandler: CMD Success Patch SEM Status = 3 release patch semaphore  WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0  Parsing CPU 0 fw tailer Chip ID: 0x0b Eco version: 0x01 Region number: 0x07 Format version: 0x02 Format flag: 0x01 Ram version: ____000000 Built date: 20230828104432 Common crc: 0x68378479 Parsing tailer region 0 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x21fc00 Download size: 110592 Feature set: 0x20 Parsing tailer region 1 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x31dc00 Download size: 205824 Feature set: 0x00 Parsing tailer region 2 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x417400 Download size: 31744 Feature set: 0x00 Parsing tailer region 3 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0022800 Download size: 411136 Feature set: 0x00 Parsing tailer region 4 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0086e00 Download size: 332288 Feature set: 0x00 Parsing tailer region 5 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x23ac00 Download size: 87040 Feature set: 0x00 Parsing tailer region 6 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x400000 Download size: 81920 Feature set: 0x00 Release info: header tag = 0, total length = 64 tag 1, padding length = 2, tag length = 58 payload: t-neptune-mp-mt7915-2045-MT7915_MP_7_4_2045-20230828103801 Start address = 0x21fc00, DL length = 110592, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x31dc00, DL length = 205824, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x417400, DL length = 31744, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0022800, DL length = 411136, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0086e00, DL length = 332288, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x23ac00, DL length = 87040, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x400000, DL length = 81920, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 0x1, address = 0x21fc00 EventGenericEventHandler: CMD Success Parsing CPU 1 fw tailer Chip ID: 0x00 Eco version: 0x01 Region number: 0x03 Format version: 0x02 Format flag: 0x01 Ram version: DEV_000000 Built date: 20230828104451 Common crc: 0x6c78177a Parsing tailer region 0 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x10200000 Download size: 90032 Feature set: 0x00 Parsing tailer region 1 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x10300000 Download size: 16592 Feature set: 0x00 Parsing tailer region 2 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0000000 Download size: 7648 Feature set: 0x00 Release info: header tag = 0, total length = 0 Start address = 0x10200000, DL length = 90032, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x10300000, DL length = 16592, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0000000, DL length = 7648, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 0x4, address = 0x0 EventGenericEventHandler: CMD Success :MtCmdCr4Capability: option(0) MCU Init Done! efuse_probe: efuse = 10000012 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0] rtmp_nv_init(): EEPROM Size[3584] flash_read(): read from address:0x120000, len:0xe00! [EEPROMImage - PreCalImageInfo - PreCalImage - TxDPDImage] [0xc98f3000 - 0xc98f3e00 - 0xc98f3e10 - 0xc9900220] validFlashEepromID(): eeFlashId=7915, pAd->ChipID=7915 [d-die version:1] [a-die version:2] [36.351][cmm] 671: create dropbear DSS key success. [36.352][cmm] 680: parent pid 859 [36.352][cmm] 688: parent pre cpu mask 00000001 [36.352][cmm] 702: parent post cpu mask 00000003 [36.476][ntpc] 789 - ERROR: open DNS error NTP server list: NICReadEEPROMParameters: EEPROM 0x62 0 now bb MainSsid mac d8:44:89:bd:cf:d8 Country Region from e2p = 0 antenna_default_reset() todo antenna_default_reset() value = 0x5292, TxPath = 2, RxPath = 2 RTMPReadTxPwrPerRate(458): Don't Support this now! rc_radio_init(): DBDC MODE=1, ConcurrentBand=2 rc_radio_init(): radio_ctrl=cc609700,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf rc_radio_init(): radio_ctrl=cc609a58,Band=1,rfcap=3,channel=1,PhyMode=2 extCha=0xf ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 AntCfgInit(2918): Not support for HIF_MT yet! MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku_5g.dat mt7915_check_RF_lock_down: RFlockDown Enable: 0 MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku-bf_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku-bf_5g.dat mt7915_check_RF_lock_down: RFlockDown Enable: 0 EEPROM Init Done! mac_init()--> init_mac_cr()--> <--mac_init() CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 MAC Init Done! BBPInit():BBP Initialization..... Band 0: valid=1, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2 Band 1: valid=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0 BBPInit() todo PHY Init Done! ch_switch_monitor_state_machine_init:: enter ch_switch_monitor_cfg_reset:: enter ch_switch_monitor_cfg_reset:: enter tx_pwr_comp_init():NotSupportYet! Set_SCSDefaultEnable(): BandIdx=0, SCSEnable=1 Set_SCSDefaultEnable(): BandIdx=1, SCSEnable=1 led_send_fw_cmd: 0205000000240000 led_0 map to gpio_18... led_send_fw_cmd: 0205010000340000 led_1 map to gpio_26... MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) ap_ftkd> Initialize FT KDP Module... Main bssid = 00:00:00:00:00:00 SetMuruPlatformTypeProc: param.ucPlatformType = 2 muru_cfg_dlul_limits:(Ret = 1 muru_cfg_dlul_limits:(Ret = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) <==== mt_wifi_init, Status=0 CmdHeraStbcPriorityCtrl: u1BandIdx=0, u1Operation=1, u1StbcPriority=0 CmdHeraStbcPriorityCtrl: u1BandIdx=1, u1Operation=1, u1StbcPriority=0 Register MBSSID IF 1 (ra1) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(1) Register MBSSID IF 2 (ra2) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(2) Register MBSSID IF 3 (ra3) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(3) Register MBSSID IF 4 (ra4) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(4) Register MBSSID IF 5 (ra5) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(5) Register MBSSID IF 6 (ra6) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(6) Register MBSSID IF 7 (rai0) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(7) Register MBSSID IF 8 (rai1) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(8) Register MBSSID IF 9 (rai2) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(9) Register MBSSID IF 10 (rai3) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(10) Register MBSSID IF 11 (rai4) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(11) Register MBSSID IF 12 (rai5) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(12) Register MBSSID IF 13 (rai6) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(13) MSTA_Init (2) ---> ApCli Register MSTA IF (apcli0) , pAd->MSTANum = 1 wdev_init(caller:MSTA_Init+0x200/0x650), wdev(14) Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=0, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 Register MSTA IF (apclii0) , pAd->MSTANum = 2 wdev_init(caller:MSTA_Init+0x200/0x650), wdev(15) Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=0, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 mt_service_init: wlan service inits successfully! WtcSetMaxStaNum: MaxStaNum:222, BssidNum:14, WdsNum:16, MSTANum:2, MaxNumChipRept:32, MinMcastWcid:272 RedInit: set CR4/N9 RED Enable to 1. RedInit: RED Initiailize Done. cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2. ==ecnt_wifi_rx_rps_hook=== RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 0 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 BuildChannelList() BandIdx = 0, PhyMode = 78, ChListNum = 13: phy_oper_init(): operate TxStream = 2, RxStream = 2 phy_freq_adjust : no prim_ch value for adjust! Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=0, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=0 AP inf up for ra_0(func_idx) OmacIdx=0 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x110/0x464)!! mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=1, ctrl_ch2=0, cent_ch=1 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=1, ctrl_ch2=0, cent_ch=1, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) EnableNF: mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=6, ctrl_ch2=0, cent_ch=6, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) Average Power WF0 WF1 WF2 WF3 -128 -128 -128 -128 mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=7, ctrl_ch2=0, cent_ch=7, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=8, ctrl_ch2=0, cent_ch=8, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) EnableNF: mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=9, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=10, ctrl_ch2=0, cent_ch=10, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=11, ctrl_ch2=0, cent_ch=11, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2c8/0x464)!! ==================================================================== Channel 1 : Busy Time = 6517, Skip Channel = FALSE, BwCap = TRUE Channel 2 : Busy Time = 1977, Skip Channel = FALSE, BwCap = TRUE Channel 3 : Busy Time = 929, Skip Channel = FALSE, BwCap = TRUE Channel 4 : Busy Time = 2307, Skip Channel = FALSE, BwCap = TRUE Channel 5 : Busy Time = 4014, Skip Channel = FALSE, BwCap = TRUE Channel 6 : Busy Time = 8551, Skip Channel = FALSE, BwCap = TRUE Channel 7 : Busy Time = 10596, Skip Channel = FALSE, BwCap = TRUE Channel 8 : Busy Time = 10915, Skip Channel = FALSE, BwCap = TRUE Channel 9 : Busy Time = 9756, Skip Channel = FALSE, BwCap = TRUE Channel 10 : Busy Time = 7908, Skip Channel = FALSE, BwCap = TRUE Channel 11 : Busy Time = 9213, Skip Channel = FALSE, BwCap = TRUE ==================================================================== Rule 3 Channel Busy time value : Select Primary Channel 3 Rule 3 Channel Busy time value : Min Channel Busy = 929 Rule 3 Channel Busy time value : BW = 20 [SelectClearChannelBusyTime] - band0 END ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 3, IsAband = 0 mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0) zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0 ApAutoChannelAtBootUp<----------------- ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:0, CfgMode:177 [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(0) wifi_sys_linkup, wdev idx = 0 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[0]=0 wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_up: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) Band0 BcnInitedRnd = 32 MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 0 for WscUUIDInit Generate UUID for apidx(0) WDS_Init(): wds_num(0) should be 4 of 2.4G WDS_Init(): wds_num(0) should be 4 of 5G WDS_Init():wds_num[0]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0 Total allocated 0 WDS(es) for band0! ra4: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 4 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=4 AP inf up for ra_4(func_idx) OmacIdx=17 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:4, CfgMode:177 [PMF]APPMFInit:: apidx=4, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(4) wifi_sys_linkup, wdev idx = 4 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[4]=4 wifi_sys_linkup:wdev(type=4,func_idx=1,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_up: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 4 for WscUUIDInit Generate UUID for apidx(4) ra5: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 5 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=5 AP inf up for ra_5(func_idx) OmacIdx=18 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:5, CfgMode:177 [PMF]APPMFInit:: apidx=5, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(5) wifi_sys_linkup, wdev idx = 5 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[5]=5 wifi_sys_linkup:wdev(type=5,func_idx=1,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_up: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 5 for WscUUIDInit Generate UUID for apidx(5) Set_Map_Proc current MAP MODE is 3 Set_MapR2_Proc: MAP R2 is enabled Set_Bh_Bss_Proc ra0 bandIdx = 0 ,DevOwnRole 0x20 Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20 Set_Fh_Bss_Proc ra4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra4 bandIdx = 0 ,DevOwnRole 0x44 Set_Fh_Bss_Proc ra5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra5 bandIdx = 0 ,DevOwnRole 0x48 rt28xx_ap_ioctl interface[ra6](index[6]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[ra6](index[6]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down [46.556][cmm] 236 - ERROR: Get map shared buffer error. [46.556][cmm] 1156 - ERROR: Failed to attach map shared memory buffer. [46.556][cmm] 14353 - ERROR: There are no APDevices saved in map shared memory. [46.557][cmm] 17243 - ERROR: Can not find Controller cfg_mode=16 cfg_mode=16 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 BuildChannelList() BandIdx = 0, PhyMode = 78, ChListNum = 13: Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=1, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=2, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=3, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=6, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=14, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 SetEDCCAEnableCtrl: BandIdx = 0 set_vow_airtime_fairness_en: set 0. set_vow_dwrr_max_wait_time: set 1. SetPercentageCtrl: ucBandIdx = 0 SetPercentageCtrl: TxPowerPercentEn = 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 SetPowerDropCtrl: ucPowerDrop = 100 sync for : ra0 sync for : ra4 sync for : ra5 Set_FragThreshold_Proc::set wdev0 FragThreshold=2346) Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 device ra5 entered promiscuous mode br0: port 5(ra5) entered forwarding state br0: port 5(ra5) entered forwarding state device ra4 entered promiscuous mode br0: port 6(ra4) entered forwarding state br0: port 6(ra4) entered forwarding state can't add ra3 to bridge br0: Invalid argument can't add ra2 to bridge br0: Invalid argument can't add ra1 to bridge br0: Invalid argument device ra0 entered promiscuous mode br0: port 7(ra0) entered forwarding state br0: port 7(ra0) entered forwarding state device apcli0 entered promiscuous mode [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 0 ExtEventBeaconLostHandler::FW EVENT (d8:44:89:bd:cf:d8), Reason 0x10 AP Beacon OFF!!! wifi_sys_linkdown:wdev(type=1,func_idx=0,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_down: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wmm_ctrl_release_entry(): Can't find HdevObj or Edca not required wifi_sys_close, wdev idx = 0 hw_ctrl_flow_v2_close: wdev_idx=0 wifi_sys_open(), wdev idx = 0 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=0 wifi_sys_linkup, wdev idx = 0 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[0]=0 wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_up: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 ap_over_lapping_scan(), pAd->CommonCfg.bForty_Mhz_Intolerant:0, pAd->CommonCfg.bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 [PMF]APPMFInit:: apidx=4, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 4 wifi_sys_linkdown:wdev(type=1,func_idx=4,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_down: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 4 hw_ctrl_flow_v2_close: wdev_idx=4 wifi_sys_open(), wdev idx = 4 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=4 wifi_sys_linkup, wdev idx = 4 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[4]=4 wifi_sys_linkup:wdev(type=4,func_idx=1,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_up: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 restart_ap, mbss_idx:4, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 [PMF]APPMFInit:: apidx=5, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 5 wifi_sys_linkdown:wdev(type=1,func_idx=5,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_down: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 5 hw_ctrl_flow_v2_close: wdev_idx=5 wifi_sys_open(), wdev idx = 5 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=5 wifi_sys_linkup, wdev idx = 5 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[5]=5 wifi_sys_linkup:wdev(type=5,func_idx=1,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_up: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 restart_ap, mbss_idx:5, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! WLAN-Start wlNetlinkTool Interface doesn't accept private ioctl... set (8BE2): Network is down Waiting for Wireless Events from interfaces... swWlanChkAhbErr: netlink to do SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 0 MtCmdThermalProtectDutyCfg: duty: 100 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 80 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 1 MtCmdThermalProtectDutyCfg: duty: 80 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 60 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 2 MtCmdThermalProtectDutyCfg: duty: 60 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 20 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 3 MtCmdThermalProtectDutyCfg: duty: 20 SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 5 MtCmdThermalProtectEnable: band_idx: 0, protect_type: 1 MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 120 MtCmdThermalProtectEnable: restore_temp: 114, recheck_time: 5 rai0: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 7 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 BuildChannelList() BandIdx = 1, PhyMode = 177, ChListNum = 9: DfsBuildChannelList(): Done phy_oper_init(): operate TxStream = 2, RxStream = 2  [RadarStateCheck] RD_NORMAL_MODE  phy_freq_adjust : no prim_ch value for adjust! Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=0, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=7 AP inf up for ra_7(func_idx) OmacIdx=0 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) [AutoChSelBuildChannelListFor5G] ChListNum5G = 9 UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x110/0x464)!! mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=36, ctrl_ch2=0, cent_ch=36 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=36, ctrl_ch2=0, cent_ch=36, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=40, ctrl_ch2=0, cent_ch=40 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=40, ctrl_ch2=0, cent_ch=40, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=44, ctrl_ch2=0, cent_ch=44, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=48, ctrl_ch2=0, cent_ch=48 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=48, ctrl_ch2=0, cent_ch=48, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=149, ctrl_ch2=0, cent_ch=149 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=149, ctrl_ch2=0, cent_ch=149, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=153, ctrl_ch2=0, cent_ch=153 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=153, ctrl_ch2=0, cent_ch=153, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=157, ctrl_ch2=0, cent_ch=157 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=157, ctrl_ch2=0, cent_ch=157, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=161, ctrl_ch2=0, cent_ch=161 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=161, ctrl_ch2=0, cent_ch=161, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2c8/0x464)!! ==================================================================== Channel 36 : Busy Time = 661, Skip Channel = FALSE, BwCap = TRUE Channel 40 : Busy Time = 48, Skip Channel = FALSE, BwCap = TRUE Channel 44 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE Channel 48 : Busy Time = 1, Skip Channel = FALSE, BwCap = TRUE Channel 149 : Busy Time = 259, Skip Channel = FALSE, BwCap = TRUE Channel 153 : Busy Time = 86, Skip Channel = FALSE, BwCap = TRUE Channel 157 : Busy Time = 2759, Skip Channel = FALSE, BwCap = TRUE Channel 161 : Busy Time = 291, Skip Channel = FALSE, BwCap = TRUE ==================================================================== Rule 3 Channel Busy time value : Select Primary Channel 44 Rule 3 Channel Busy time value : Min Channel Busy = 661 Rule 3 Channel Busy time value : BW = 80 [SelectClearChannelBusyTime] - band1 END ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 44, IsAband = 1  [RadarStateCheck] RD_NORMAL_MODE  mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=2, RXStream=2, scan(0) MtCmdSetTxRxPath: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=3, BandIdx=1, ChBand=1, BW=2,TXStream=2, RXStream=3, scan(0) DfsBuildChannelList(): Done zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0 sApAutoChannelAtBootUp<----------------- ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:7, CfgMode:78 h[PMF]APPMFInit:: apidx=7, MFPC=0, MFPR=0, SHA256=0 :Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(7) wifi_sys_linkup, wdev idx = 7 /usr/script/usbhost_load.sh: not found wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:284 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[7]=7 wifi_sys_linkup:wdev(type=7,func_idx=1,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_up: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) Band1 BcnInitedRnd = 87 MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 7 for WscUUIDInit Generate UUID for apidx(7) WDS_Init(): wds_num(1) should be 4 of 2.4G WDS_Init(): wds_num(1) should be 4 of 5G WDS_Init():wds_num[1]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0 Total allocated 0 WDS(es) for band1! rai4: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 11 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=11 AP inf up for ra_b(func_idx) OmacIdx=17 AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:11, CfgMode:78 [PMF]APPMFInit:: apidx=11, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(11) wifi_sys_linkup, wdev idx = 11 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:283 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[11]=11 wifi_sys_linkup:wdev(type=11,func_idx=1,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_up: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 11 for WscUUIDInit Generate UUID for apidx(11) rai5: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 12 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=12 AP inf up for ra_c(func_idx) OmacIdx=18 AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:12, CfgMode:78 [PMF]APPMFInit:: apidx=12, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(12) wifi_sys_linkup, wdev idx = 12 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:282 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[12]=12 wifi_sys_linkup:wdev(type=12,func_idx=1,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_up: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 12 for WscUUIDInit Generate UUID for apidx(12) Set_Map_Proc current MAP MODE is 3 Set_MapR2_Proc MAP R2 is already enabled Set_Bh_Bss_Proc rai0 bandIdx = 1 ,DevOwnRole 0x20 Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x20 Set_Fh_Bss_Proc rai4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc rai4 bandIdx = 1 ,DevOwnRole 0x44 Set_Fh_Bss_Proc rai5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc rai5 bandIdx = 1 ,DevOwnRole 0x48 rt28xx_ap_ioctl interface[rai6](index[13]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[rai6](index[13]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down [52.042][cmm] 236 - ERROR: Get map shared buffer error. [52.043][cmm] 1156 - ERROR: Failed to attach map shared memory buffer. [52.043][cmm] 14353 - ERROR: There are no APDevices saved in map shared memory. [52.043][cmm] 17243 - ERROR: Can not find Controller cfg_mode=17 cfg_mode=17 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 BuildChannelList() BandIdx = 1, PhyMode = 177, ChListNum = 9: DfsBuildChannelList(): Done Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=8, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=9, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=10, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=13, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=15, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 hc_radio_res_request(): wdev=8, hobj is not ready! hc_radio_res_request(): wdev=9, hobj is not ready! hc_radio_res_request(): wdev=10, hobj is not ready! hc_radio_res_request(): wdev=13, hobj is not ready! hc_radio_res_request(): wdev=15, hobj is not ready! set_vow_airtime_fairness_en: set 0. set_vow_dwrr_max_wait_time: set 1. SetPercentageCtrl: ucBandIdx = 1 SetPercentageCtrl: TxPowerPercentEn = 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 SetPowerDropCtrl: ucPowerDrop = 100 sync for : ra0 sync for : ra4 sync for : ra5 sync for : rai0 sync for : rai4 sync for : rai5 Set_FragThreshold_Proc::set wdev7 FragThreshold=2346) Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 device rai5 entered promiscuous mode br0: port 9(rai5) entered forwarding state br0: port 9(rai5) entered forwarding state device rai4 entered promiscuous mode br0: port 10(rai4) entered forwarding state br0: port 10(rai4) entered forwarding state can't add rai3 to bridge br0: Invalid argument can't add rai2 to bridge br0: Invalid argument can't add rai1 to bridge br0: Invalid argument device rai0 entered promiscuous mode br0: port 11(rai0) entered forwarding state br0: port 11(rai0) entered forwarding state device apclii0 entered promiscuous mode [PMF]APPMFInit:: apidx=7, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 7 wifi_sys_linkdown:wdev(type=1,func_idx=7,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_down: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wmm_ctrl_release_entry(): Can't find HdevObj or Edca not required wifi_sys_close, wdev idx = 7 hw_ctrl_flow_v2_close: wdev_idx=7 wifi_sys_open(), wdev idx = 7 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=7 wifi_sys_linkup, wdev idx = 7 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:284 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[7]=7 wifi_sys_linkup:wdev(type=7,func_idx=1,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_up: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [PMF]APPMFInit:: apidx=11, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 11 ExtEventBeaconLostHandler::FW EVENT (da:44:89:bd:cf:d8), Reason 0x10 AP Beacon OFF!!! wifi_sys_linkdown:wdev(type=1,func_idx=11,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_down: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 11 hw_ctrl_flow_v2_close: wdev_idx=11 wifi_sys_open(), wdev idx = 11 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=11 wifi_sys_linkup, wdev idx = 11 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:283 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[11]=11 wifi_sys_linkup:wdev(type=11,func_idx=1,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_up: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [PMF]APPMFInit:: apidx=12, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 12 wifi_sys_linkdown:wdev(type=1,func_idx=12,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_down: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 12 hw_ctrl_flow_v2_close: wdev_idx=12 wifi_sys_open(), wdev idx = 12 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=12 wifi_sys_linkup, wdev idx = 12 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:282 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[12]=12 wifi_sys_linkup:wdev(type=12,func_idx=1,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_up: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [53.537][cmm] 9189 - ERROR: wlNetlinkTool is already there. rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down sh: can't open '/etc/smp.sh' SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 0, duty: 100 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 0 MtCmdThermalProtectDutyCfg: duty: 100 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 1, duty: 80 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 1 MtCmdThermalProtectDutyCfg: duty: 80 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 2, duty: 60 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 2 MtCmdThermalProtectDutyCfg: duty: 60 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 3, duty: 20 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 3 MtCmdThermalProtectDutyCfg: duty: 20 SetThermalProtectEnable(): band_idx: 1, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 5 MtCmdThermalProtectEnable: band_idx: 1, protect_type: 1 MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 120 MtCmdThermalProtectEnable: restore_temp: 114, recheck_time: 5 [53.712][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra1/brport/bridge/ifindex [53.714][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai1/brport/bridge/ifindex [53.716][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra2/brport/bridge/ifindex [53.718][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra3/brport/bridge/ifindex [53.720][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai2/brport/bridge/ifindex [53.721][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai3/brport/bridge/ifindex rm: can't remove '/var/tmp/os_print/tpApp/2_debug': No such file or directory [53.938][cmm] 794: Skip create dropbear RSA key here [53.938][cmm] 822: Skip create dropbear DSS key here [2164] Mar 19 00:00:53 Running in background [Mar 19 00:00:53] radvd: poll error: Interrupted system call [Mar 19 00:00:53] radvd: poll error: Interrupted system call ip6tables: No chain/target/match by that name. iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky insmod: can't insert '/lib/modules/kmdir/kernel/drivers/net/ppp/ppp_mppe.ko': No such file or directory ioctl set error: Inappropriate ioctl for device [54.815][cmm] 586 - ERROR: Gpon sn str:5450Password: ¸± 4C4789BDCFD8 [54.816][cmm] 587 - endor: 0x54504c47 mERROR: Gpon pwd str: [54.816][cmm] 588 - ERROR: Gpon sn type:1 [54.816][cmm] 589 - ERROR: Gpon pwd type:0 api_set_sn_auth_info(564): passwd:(); api_set_sn_auth_info(637): snIUint32[0] = 0x54504c47, snIUint32[1] = 0x89bdcfd8, [2024-3-19 Tue 00:00:54.257898][TP_omciMibReset][6430]:set OMCI machine in TP_omciMibReset api_renegotiate(780):api_renegotiate after MIB reset api_set_ctc_auth_info(649): -- not implemented, to do here! -- [54.900][cmm] 1177 - ERROR: Init loid tplink passwd tplink [54.928][cmm] 133 - ERROR: Cann't open file: /var/run/zebra.pid. [54.960][cmm] 133 - ERROR: Cann't open file: /var/run/ripd.pid. [54.961][cmm] 133 - ERROR: Cann't open file: /var/run/ripngd.pid. iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading k_domain: tplinkmodem.net ip6tables: Too many links. [55.214][httpd] 1057 - ERROR: u_domain: tplinkmodem.net iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). [ rsl_initIqosObj ] 1248: 0#0,0,0,0 [56.162][cmm] 5449 - ERROR: Device.X_TP_Services.X_TP_VoiceService.{i}.PhyInterface.{i}. exit. skip create instance. writing RSA key killall: minidlnad: no process killed killall: vsftpd: no process killed [59.070][cmm] 1034 - ERROR: Can not find the sftp config file: /var/tmp/dconf/sftpcfg iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). [59.214][cmm] 1034 - ERROR: Can not find the sftp config file: /var/tmp/dconf/sftpcfg [2711] Mar 19 00:00:58 Failed listening on '22': Error listening: Address already in use [2024/03/19 00:00:58] getifaddr.c:334: runtime_vars.ifaces[0]=br0 Dropbear init failed, cos will restart it. [2711] Mar 19 00:00:58 Early exit: No listening ports available. [59.390][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.391][cmm] 1653 - ERROR: ret=9007 [59.391][cmm] 707 - ERROR: ret=9007 [59.392][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.392][cmm] 1653 - ERROR: ret=9007 [59.393][cmm] 707 - ERROR: ret=9007 ++++++++++we are going to init cloud+++++++++++++++++ [59.430][httpd] 529 - ERROR: Unknown page: /main/advanceLte.htm, skip it [59.430][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager Set_MapTS_Proc MAP TS is already disabled than 32. [59.431][cmm] 1653 - ERROR: ret=9007 [59.431][httpd] 529 - ERROR: Unknown page: /main/sfpWan.htm, skip it [59.431][cmm] 7Set_MapTS_Proc MAP TS is already disabled 07 - ERROR: ret=9007 [59.431][httpd] 529 - ERROR: Unknown page: /main/sfpWanEdit.htm, skip it [59.442][cmm] 4364 - ERROR: mesh enable is 1, ts enable iSet_Map_Bh_Primary_Vid_Proc: ra5 default vid=4095 s 0 [59.443][cmm] 3710 - ERROR: traffic separation is disablrt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! ed Interface doesn't accept private Set_Map_Fh_Vid_Proc: ra0 fh vid=4095 ioctl... set (8BE2): Network is down Set_Map_Bh_Primary_Vid_Proc: rai5 default vid=4095 rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down Set_Map_Fh_Vid_Proc: rai0 fh vid=4095 mmmInit():Total mem size=51364, addr=0x0xcd7008. **************************StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag ra0 *********************************** *************************MMM TABLE DUMP********************** ------------------------------------------------------------- poolhead(40)rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! poolnum dynamictimes chainhead poolend --------------------------------------------StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag ra0 ----------------- 0xcd7008 8 0 (nil) 0xce38ac -----------------------------rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! -------------------------------- index poolhead(20) size blocks free usage ------------------------------------------------------------- 1 0xcd7030 32 256 256 0 2 0xcd9448 64 128 128 0 3 0xcdb660 128 64 64 0 4 0xcdd778 256 32 32 0 5 0xcdf810 512 8 8 0 6 0xce0848 1024 4 4 0 7 0xce1870 2048 2 2 0 8 0xce2890 4096 1 1 0 ------------------------------------------------------------- index chainnode(16) magic length prev next ------------------------------------------------------------- (nil) ************************************************************* 1710817258915|2729|4|cloud.c:91:main| - cloud-sdk version: 1.3.9-rc03, build_time:20211227_172322 Interface doesn't accept private ioctl... set (8BE2): Invalid argument Interface doesn't accept private ioctl... set (8BE2): Network is down Interface doesn't accept private ioctl... set (8BE2): Invalid argument Interface doesn't accept private ioctl... set (8BE2): Network is down [59.646][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.647][cmm] 1653 - ERROR: ret=9007 [59.647][cmm] 707 - ERROR: ret=9007 ************************************************** ********************config dump******************* -------------------------------------------------- sef domain : n-deventry-gw.tplinkcloud.com sef port : 443 cloud svr default port : 443 default svr : n-devs-gw.tplinkcloud.com default port : 443 default valid time : 172800 heartbeat interval : 235000 request timeout : 5000 reconnect timewait max : 1024000 reconnect cachedsvr max times : 5 reconnect defaultsvr max times : 5 reconnect random time min : 2000 reconnect random time max : 256000 short connect interval : 259200000 max message number : 1000 max client number : 20 service file : /tmp/cloud_service.cfg cer file : /etc/cloud/2048_newroot.cer ssl verify CN : ssl verify time : 0 ************************************************** [59.762][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.763][cmm] 1653 - ERROR: ret=9007 [59.763][cmm] 707 - ERROR: ret=9007 [59.799][cmm] 1807 - ERROR: The lengh(0)voip modules loaded, timer number 3 of phone number() is less than 3 or lager than 32. [59.799][cmm] 1653 - ERROR: ret=9007 [59.799][cmm] 707 - ERROR: ret=9007 [59.800][cmm] 1387 - ERROR: --> X_TP_ConnType=LAN X_TP_ServiceType=Unknown [59.801][cmm] 1387 - fxsGetLine(0)Ret[1]=State[3] xsSetLine[0]state 0x9 State UNKNOWN ! 0;31mERROR: --> Xbr0: port 1(eth0.1) entered disabled state _TP_ConnType=PPP3G X_TP_ServiceType=Unknown [59.801][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP4G Xdevice eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state _TP_ServiceType=Unknown [59.801][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP X_TP_ServiceType=Internet [59.802][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.802][cmm] 1653 - ERROR: ret=9007 [59.803][cmm] 707 - ERROR: ret=9007 [59.804][cmm] 1807 - ERROR: The lengh(0) of phone number() is lbr0: port 2(eth0.2) entered disabled state ess than 3 or lager than 32. [59.804][cmm] 1653 - ERROR: ret=9007 [59.805][cmm] 707 - ERROR: ret=9007 [59.806][httpd] 659 - ERROR: Invalid vdevice eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state alue! [59.806][httpd] 529 - ERROR: Unknown page: /main/operateMode.htm, skip it sh: can't create /proc/tplink/eth_forward: nonexistent directory *reg=00002104 value:00ff0000 *reg=00002204 value:00ff0000 *reg=00002304 value:00ff0000 *reg=00002404 value:00ff0000 VDSP_GetInstance:292 [GDI] Change log level to (EVA_LOG_ERR). ludewei get the ipv6 addr=:: ludewei get the ipv6 addr=:: ipv6 Via:0 zeroIp:1 zeroIp6:1 ipaddr:0.0.0.0 ip6addr::: [60.011][cutil] 2146 - ERRORbr0: port 3(eth0.3) entered disabled state [0m: Error ip is 0.0.0.0,:: Sorry, rule does not exist. Sorry, rule does not exist. device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state Sorry, rule does not exist. +++ timer 2 start (tick : 2) +++ Sorry, rule does not exist. br0: port 4(eth0.4) entered disabled state Sorry, rule does not exist. device eth0.4 left promiscuous mode Ibr0: port 4(eth0.4) entered disabled state llegal target name 'ieee1905'. Illegal target name 'ieee1905'. fxsSetLine[0]state 0x9 State UNKNOWN ! device eth0 entered promiscuous mode br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state sh: write error: Invalid argument device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state ath_band_steering_netlink_receive 157 pid = 2910 ath_band_steering_netlink_receive 157 pid = 2910 device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state ath_band_steering_netlink_receive 157 pid = 2910 ath_band_steering_netlink_receive 157 pid = 2910 device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode device eth0.5 is not a slave of br0 [60.547][SharedLib] 123: Map shm size: 291864 bytes [60.548][SharedLib] 85: mac(DA:44:89:BD:CF:D9), cfg_file(/var/tmp/map.conf), is_registrar(1), bMapController(1), mapEnable(1), vlan_enable(0) procName is sigma_dut, keyWord is [60.557][SharedLib] 123: Map shm size: 291864 bytes [60.558][SharedLib] 85: mac(DA:44:89:BD:CF:D8), cfg_file(/g_tx_ctl = 1 var/tmp/map.conf), is_registrar(0), bMapController(0), mapEnable(1), vlan_enable(0) procName is sigma_dut, keyWord is sh: write error: Invalid argument updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 [60.821][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) LoadClientCert: Not using a device certificate for connections topic[/tpuc/tr369controller], response_topic[/tpuc/D84489-Device2-22445J1001433] agentid is :USP::D84489BDCFD8 DM_EXEC_Main start MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) [2024-3-19 Tue 00:01:00.537022]OMCI wait for RSL init done Star [2024-3-19 Tue 00:01:00.543174][main][1165]:Enter OMCI State Machine, OMCI_STATE_START! ting daemon... sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) [2024-3-19 Tue 00:01:00.595660][omciAddVendorMeToStdMeTable][1199] before DM operation ,totalSize(4) [ omciAddVendorMeToS [2024-3-19 Tue 00:01:00.610068][omciAddVendorMeToStdMeTable][1250] toalTblSize(4) a/b (0) tdMeTable ] 1 [2024-3-19 Tue 00:01:00.619315] initFilterMeInfo toalTblSize = 3 216 [2024-3-19 Tue 00:01:00.626100] enter omciMeInitForCWMPConfigData : 1#1 [2024-3-19 Tue 00:01:00.633074] enter omciMeInitForExtendOntG [ o [2024-3-19 Tue 00:01:00.639637] enter omciMeInitForExtendOnt2Abi mciAd [2024-3-19 Tue 00:01:00.646483] enter omciMeInitForONTImageMode dVendorM [2024-3-19 Tue 00:01:00.653501] enter omciMeInitForExtendOnt3Abi eToSt [2024-3-19 Tue 00:01:00.660391] enter omciMeInitForHuaweiProprietary dMeTable [2024-3-19 Tue 00:01:00.667720] enter omciMeInitForOntOpticalDat ] 12 [2024-3-19 Tue 00:01:00.674686] enter omciMeInitForHwExtendedWan 20: 2# [2024-3-19 Tue 00:01:00.681698] enter omciMeInitForStandard92Me 1,1 [2024-3-19 Tue 00:01:00.688403] enter omciMeInitForExtend80211Mn [ om [2024-3-19 Tue 00:01:00.695245] enter omciMeInitForVoipSoftwareI ciAddVe [2024-3-19 Tue 00:01:00.702322] enter omciMeInitForExtOntProduct ndorMeTo [2024-3-19 Tue 00:01:00.709409][main][1183]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE! StdMeTable [2024-3-19 Tue 00:01:00.720556][omciInitCapability][539] omciInitCapability In ] 1216: [2024-3-19 Tue 00:01:00.728469]pPortList(48,248,47,47,47,47,32) 1#2 [2024-3-19 Tue 00:01:00.734838]pPort(48) [ om [2024-3-19 Tue 00:01:00.739244]pPort(248) ciAdd [2024-3-19 Tue 00:01:00.743696]pPort(47) Vend [2024-3-19 Tue 00:01:00.747964]pPort(47) orMeT [2024-3-19 Tue 00:01:00.752284]pPort(47) oS [2024-3-19 Tue 00:01:00.756441]pPort(47) device lo entered promiscuous mode tdMeTa [2024-3-19 Tue 00:01:00.763944]pPort(32) ble ] 12 [2024-3-19 Tue 00:01:00.768515][omciInitCapability][640] getNext Dev2 currGponAuthObj SN(54504C4789BDCFD8),SNtype(1) 20: 2#2,1 [2024-3-19 Tue 00:01:00.779951][omciInitCapability][687] currOmciCapObj.vendorId IS (TPLG) [ omci [2024-3-19 Tue 00:01:00.788940]read_flash:read In - 8 bytes in 66977792 AddVendorM [2024-3-19 Tue 00:01:00.796512]read_flash:read In - 8 bytes in 66977792 eToStdMeTable ] 1216: 1#3 [ omciAddVendorMeToStdMeTable ] 1220 [2024-3-19 Tue 00:01:00.808685]read_flash:read In - 512 bytes in 1703936 : 2#3,1 [2024-3-19 Tue 00:01:00.816286]read_flash:read In - 512 bytes in 33554432 [ omciAddVendorMeToStdMeTable ] 1216: 1#4 [ omciAddVendorMeToStdMeTable ] 1220: 2#4,1 sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret [2024-3-19 Tue 00:01:00.837980]do not config omci intance by file info (-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or direct [2024-3-19 Tue 00:01:00.880041][main][1193]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT! ory line(593) Msg.type(9250) pid(859) errno(2) ret(-1)set olt type: 0 sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(ponTime:Connection Start 5working_mode: 10 93) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type [2024-3-19 Tue 00:01:00.921074][main][1221]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN! (9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) svchost_get_event_val: get param fail [0] sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) ctromfile.cfg [61.527][mapController] 387: Starting map (AL MAC = da:44:89:bd:cf:d9), mapEnable = 1... [61.528][mapController] 9783: send stand renew to in band[0] [61.529][mapController] 9783: send stand renew to in band[1] sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) gpon flow open ioctl file fail sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sh: /bin/mv: not found sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) Couldn't open image file: /tmp/tc_store_romfile.conf! sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) [61.618][mapAgent] 383: Starting map (AL MAC = da:44:89:bd:cf:d8), mapEnable = 1... sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) [61.642][TP1905] 4875: Agent on controller [61.643][TP1905] 4875: Agent on controller sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) Unlocking reservearea ... Could not open mtd device: reservearea Couldn't open image file: /tmp/tc_store_romfile.conf! sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) ********************config dump******************* ----------------------status---------------------- processid : 2733 ---------------------configure-------------------- loglevel : 3 verify host : n-device-api.tplinkcloud.com verify port : 0 verify path : /v1/validate post connect timeout : 20 post transfer timeout : 20 get connect timeout : 20 get transfer timeout : 20 session debug : off cer file : /etc/cloud_https/2048new.cer cer type : ************************************************** [61.775][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [61.854][mapAgent] 4148: handleApAutoconfigurationResponse ####### selfDev profile:2, sendDev profile:2 [61.937][mapAgent] 4148: handleApAutoconfigurationResponse ####### selfDev profile:2, sendDev profile:2 allocate buffer for epon_stat_prev. pon_mode = 0 [62.270][cos] 793 - ERROR: PON linkStatus changed :INIT->0 [62.270][cos] 872 - ERROR: PON linkStatus is not Stable (0) sh: write error: Invalid argument [62.641][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! [62.881][Topology] 3644 - ERROR: overrun timeStamp(0) [63.300][cos] 606 - ERROR: Dropbear error key, or can't listen to 22 port, will restart dropbear. [3206] Mar 19 00:01:02 Running in background [63.328][cos] 793 - ERROR: PON linkStatus changed :INIT->0 [63.328][cos] 797 - ERROR: PON linkStatus isStable (1) [63.335][cmm] 238 - ERROR: exit [63.335][cmm] 455 - ERROR: exit [65.096][cos] 1217: ===============================recv AgentConfig Message======================================== [65.097][cos] 1227: do not support autoconfig in Controller or easymesh disable [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [69.880][ntpc] 789 - ERROR: open DNS error NTP server list: [Mar 19 00:01:09] radvd: poll error: Interrupted system call [Mar 19 00:01:09] radvd: poll error: Interrupted system call [71.512][cos] 2212 - WARN: may have to get HW speed from driver/chip [81.722][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [91.954][cos] 2212 - WARN: may have to get HW speed from driver/chip [102.162][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [112.372][cos] 2212 - WARN: may have to get HW speed from driver/chip [122.681][cos] 1480: auto FW upgrade start [122.681][cos] 930: auto FW upgrade role check [122.682][cos] 958: auto FW upgrade enable check [122.682][cos] 1537: auto upgrade not enable, skip it [122.682][cos] 1524: force FW upgrade start [122.682][cos] 911: force FW upgrade role check [122.683][cos] 939: force FW upgrade enable check [122.683][cos] 974: force FW upgrade period check [122.683][cos] 1035: thresh range 40 [122.684][cos] 1042: delay init [0/18] [122.684][cos] 1046: force hour 3 current 0 [122.684][cos] 1599: not update at this period, skip it [122.689][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [132.912][cos] 2212 - WARN: may have to get HW speed from driver/chip starting pid 1131, tty '': '/sbin/getty -L ttyS0 115200 vt100' /bin/sh: can't access tty; job control turned off ~ # sys wan2lan on 15[143.122][cos] 2212 - WARN: may have to get HW speed from driver/chip Current wan2lan feature status: on Current portmask number is[15] ~ # /userfs/bin/ponmgr gpon get info ONU Info: ONU ID: 255 ONU State: O1 SN: TPLG89bdcfd8 PASSWD: ASCII: HEX: 00000000000000000000 Key Idx: 0 Key: 00000000000000000000000000000000 O1 Timer: 10000 ms O2 Timer: 100 ms OMCC ID: 65535 ~ # ~ # [153.338][cos] 2212 - WARN: may have to get HW speed from driver/chip #To enable debug logs in Serial/console : ~ # ~ # tcapi set OMCI_Entry0 DebugLevel 1 tcapi save tcapi commit OMCI_Entry0 And then check "tcapi show omci" if it is enabled #Enable PLOAM debugging (ring buffer setting needed to pass ranging due to introduced delays): echo "msg oam 1" > /proc/xgpon/debug echo ring_buffer_mode 1 > /proc/uart/uart echo "msg act 1" > /proc/xgpon/debug #To change serial number : prolinecmd protectEnv set 0 prolinecmd xponsn set <> (Example : ABCD002460E2) prolinecmd restore default~ # ~ # tcapi save svchost_get_event_val: get param fail [0] ~ # ~ # tcapi commit OMCI_Entry0 ~ # ~ # And then check "tcapi show omci" if it is enabled ctromfile.cfg /bin/sh: And: not found ~ # ~ #isRingBufferMode:enable (ring buffer setting needed to pass ranging due to i ntroduced delays): ~ # ~ # echo "msg oam 1" > /proc/xgpon/debug /bin/sh: can't create /proc/xgpon/debug: nonexistent directory ~ # ~ # echo ring_buffer_mode 1 > /proc/uart/uart ~ # ~ # echo "msg act 1" > /proc/xgpon/debug /bin/sh: can't create /proc/xgpon/debug: nonexistent directory ~ # ~ # #To change serial number : ~ # ~ # prolinecmd protectEnv set 0 sh: /bin/mv: not found Couldn't open image file: /tmp/tc_store_romfile.conf! valid subcommands of prolinecmd: productclass manufacturerOUI serialnum mt7570bob ssid ssid2nd wpakey wpakey2nd ssidac ssid2ndac wpakeyac wpakey2ndac hwver pppusrname ppppwd cfeusrname cfepwd xponsn xponpwd xponmode romfileselect clear version help webpwd webAccount restore GponRegId mapdevrole mapbhssid2g mapbhwpakey2g mapbhssid5g mapbhwpakey5g ~ # ~ # prolinecmd xponsn set <> (Example : ABCD002460E2) /bin/sh: syntax error: unexpected "(" ~ # ~ # prolinecmd restore defaultUnlocking reservearea ... Could not open mtd device: reservearea Couldn't open image file: /tmp/tc_store_romfile.conf! Couldn't open mtd:reservearea! Unlocking romfile ... Erase one sector from 0x0 of romfile ... tcoffset:0x0,mtdInfo.size:0x20000 size-1:1ffff enter real action ----- tcoffset:0x0 [e]Unlocking reservearea ... Could not open mtd device: reservearea Unlocking reservearea ... Could not open mtd device: reservearea The system is going down NOW! [Mar 19 00:02:38] radvd: poll error: Interrupted system call [minidlnaShutdown:1749]shutdown minidlna.... [3206] Mar 19 00:02:38 Early exit: Terminated by signal ************************************************************* *************************MMM TABLE DUMP********************** ------------------------------------------------------------- poolhead(40) poolnum dynamictimes chainhead poolend ------------------------------------------------------------- 0xcd7008 8 0 (nil) 0xce38ac ------------------------------------------------------------- index poolhead(20) size blocks free usage ------------------------------------------------------------- 1 0xcd7030 32 256 256 48 2 0xcd9448 64 128 128 38 3 0xcdb660 128 64 64 1 4 0xcdd778 256 32 32 1 5 0xcdf810 512 8 8 1 6 0xce0848 1024 4 4 1 7 0xce1870 2048 2 2 1 8 0xce2890 4096 1 1 0 ------------------------------------------------------------- index chainnode(16) magic length prev next ------------------------------------------------------------- (nil) ************************************************************* [159.374][SharedLib] 269 - ERROR: l_pSharedMemoryAddr null [159.375][SharedLib] 110: Deinit tp1905 library! [159.377][qoe] 790 - ERROR: [QoE] qoeStatisticsHandler status = : Sent SIGTERM to all processes [159.381][SharedLib] 269 - ERROR: l_pSharedMemoryAddr null [159.381][SharedLib] 110: Deinit tp1905 library! [159.382][meshMonitor] 683 - ERROR: null Terminated ~ # iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 device lo left promiscuous mode sendto: Connection refused line(613) Msg.type(5091) pid(2781) errno(111) ret(-1) ERROR: line(695) Send Msg.type(5091) pid(2781) errno(111), ret(-1) [160.187][meshMonitor] 4220 - ERROR: send msg(5091) to ID(6), errno(111) [160.210][mapAgent] 247 - ERROR: EthIntfName is NULL Illegal target name 'ieee1905'. sh: write error: Invalid argument Sent SIGKILL to all processes Requesting system reboot ===> rt_pci_shutdown() ra0: ===> main_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(0) UpdateBeaconHandler, wdev(0) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 0 wifi_sys_linkdown:wdev(type=1,func_idx=0,wdev_idx=0),BssIndex(0) br0: port 7(ra0) entered disabled state hw_ctrl_flow_v2_link_down: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 0 hw_ctrl_flow_v2_close: wdev_idx=0 EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  5  4  3  2  1  0 Boot flag csum incorrect, return image0 Prepare to boot image0 Boot flag csum incorrect, return image0 bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'kernel@1' kernel subimage Description: ECONET Linux kernel Type: Kernel Image Compression: lzma compressed Data Start: 0x818022a4 Data Size: 4730117 Bytes = 4.5 MiB Architecture: ARM OS: Linux Load Address: 0x80088000 Entry Point: 0x80088000 Hash algo: sha1 Hash value: 71831c68c18b0d0ebe74b42ed8133ee86ccf6ce1 ## Loading fdt from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: ECONET Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x818002fc Data Size: 7913 Bytes = 7.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24 Booting using the fdt blob at 0x818002fc Uncompressing Kernel Image ... OK Loading Device Tree to 8cdf2000, end 8cdf6ee8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.115 (compile@342f0d6254c6) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Tue Mar 19 09:18:53 UTC 2024 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: econet,en7523 bootconsole [uart0] enabled Memory policy: Data cache writealloc psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. [c08472b8]npu_pkt_buf_addr=8dff37c0:8dff37c0 npu_pkt_buffer memblock_alloc:8dff37c0,buf_size=1600000 PERCPU: Embedded 12 pages/cpu @cdfd9000 s18048 r8192 d22912 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=D8:44:89:BD:CF:D8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 212276K/260864K available (8124K kernel code, 3998K rwdata, 2400K rodata, 240K init, 666K bss, 48588K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0088000 - 0xc0acf450 (10526 kB) .init : 0xc0ad0000 - 0xc0b0c000 ( 240 kB) .data : 0xc0b0c000 - 0xc0ef3980 (3999 kB) .bss : 0xc0ef6000 - 0xc0f9c8e0 ( 667 kB) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:64 nr_irqs:64 64 CPU0: found redistributor 0 region 0:0x09080000 Architected cp15 timer(s) running at 25.00MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 40ns console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80088280 - 0x800882d8 CPU1: found redistributor 1 region 0:0x090a0000 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (100.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. l2c_sram_size:0x0 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = cd579800 ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available sgmii probe init start sgmii:int_name: sgmii_pcie0 sgmii:int_id: 0 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d087c100 sgmii:sgmii->pcs2_base= d087ea00 sgmii:sgmii->an_base= d0944000 sgmii:sgmii->ra_base= d0946600 sgmii:sgmii->phya_base= d0948c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d087ea20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_pcie1 sgmii:int_id: 1 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d094a100 sgmii:sgmii->pcs2_base= d094ca00 sgmii:sgmii->an_base= d094e000 sgmii:sgmii->ra_base= d0950600 sgmii:sgmii->phya_base= d0952c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d094ca20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_usb0 sgmii:int_id: 2 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d0954100 sgmii:sgmii->pcs2_base= d0956a00 sgmii:sgmii->an_base= d0958000 sgmii:sgmii->ra_base= d095a600 sgmii:sgmii->phya_base= d095cc00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d0956a20, val=0 sgmii: sync_int exit sgmii probe init exit TC3162 hardware watchdog module loaded. irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [crypto_k] res->name:/crypto_k@1fb70000 [crypto_k] res->start:0x1fb70000 === [crypto_k] res->end:0x1fb70803 === [crypto_k] ecnt_crypto_k->base:0xd09dc000 [trng] ecnt_trng_drv_probe test_uc:d0826000 test_c:cd4c0000 cpu_top->base:d09e6800 [apb_timer] ecnt_timer_drv_probe [timer] ecnt_timer->irq: 80 [timer] res->name:/apb_timer1@1fbf0100 i2c_slave init(ecnt_i2c_slave_drv_probe) done [i2s] ecnt_i2s_drv_probe 7523 Thermal Sensor address probe done squashfs: version 4.0 (2009/01/31) Phillip Lougher exFAT: Version 1.2.9 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) PCIe driver version: 7523.0.20210201 PCIe ref clk init. ===EN7523 PCIe init mtk-pcie 1fa91000.pcie: Port0 link down mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success ===============PCIe check===tmp_reg=========81014c3=========== mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers enabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:02:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref] pci 0000:02:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 02] pci 0000:00:01.0: bridge window [mem 0x20000000-0x201fffff] mt7512_pcie_fixup: 0x2438 = 20000015 mt7512_pcie_rc1_retrain: 80 = 0145dc12 80 = 01608c12 RC1 Link Traing Result: 10120008 ===========RC1 set conf space INTx============= ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162 ECNT ring buffer init success brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6) Set SPI Clock to 50 Mhz spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x02000000 at 0x00000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01 nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 bmt pool size: 81 BMT & BBT Init Success Creating 11 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000004000000 : "whole" 0x000000000000-0x000000080000 : "boot" 0x000000080000-0x0000000a0000 : "romfile" 0x0000000a0000-0x0000001a0000 : "misc" 0x0000001a0000-0x0000009a0000 : "kernel" 0x0000009a0000-0x000002000000 : "rootfs" 0x0000001a0000-0x000002000000 : "firmware" 0x000002000000-0x000002800000 : "kernel_slave" 0x000002800000-0x000003e60000 : "rootfs_slave" 0x000002000000-0x000003e60000 : "firmware_slave" 0x000003fe0000-0x000004000000 : "reserve" rootfs PPP generic driver version 2.4.5 PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 register rtpci pci 0000:00:01.0: enabling device (0140 -> 0142) rtpci 0000:02:00.0: enabling device (0140 -> 0142) === pAd = d3201000, size = 9391104 === <-- RTMPAllocAdapterBlock, Status=0 PCI CSRBaseAddress =0xd3100000, csr_addr=0xd3100000! RTMPInitPCIeDevice():device_id=0x7915 mt7915_init()--> Use the default iPAiLNA bin image! <--mt7915_init() wdev_init(caller:RTMP_COM_IoctlHandle+0x1190/0x19d8), wdev(0) !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only <-- pci_alloc_tx_rx_ring_mem, Status=0 Error: host_notify_npuMbox timeout for core_id:0, func_id:0 WIFI_MAIL_API_GET_WAIT_COUNTER fail! USB driver version: 7523.3.20210202 port 0 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 port 1 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3316 buckets, 13264 max) ludewei add module gre: GRE over IPv4 demultiplexor driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler tc3162ser_startup squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored squashfs: SQUASHFS error: unable to read xattr id index table VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Freeing unused kernel memory: 240K busybox init and set aff starting pid 443, tty '': '/etc/init.d/rcS' insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directory usbcore: registered new interface driver usb-storage insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory tp_board: loading out-of-tree module taints kernel. Register flash device: flash0 rcS (443): drop_caches: 3 start XPON related APP /tmp/cfg_load is not exist,left time 30 svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so svchost_parse_print_conf: Entry = svc_cfg_main svchost_parse_print_conf: Param = 111 random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) shm_pool_init: base[20000000] size[00200000]] shm_pool_init: Init Done! random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) svc_cfg_start: ........ Load cfg from file [/var/romfile.cfg] ..... tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> gic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use backup romfile to check! Couldn't open mtd:reservearea! mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288 Unlocking reservearea ... Could not open mtd device: reservearea [BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> agic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use default romfile to check! mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432 Unlocking reservearea ... Could not open mtd device: reservearea [DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> agic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use usrfs romfile to check! mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea /tmp/cfg_load is not exist,left time 29 ctromfile.cfg <> mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. reservearea ... Could not open mtd device: reservearea handle_proline_paras 1564 SSID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ha[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ndle_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. roline[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. _paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 1564 [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. WPAPSK[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. :12345[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 678. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. hanrandom: ubusd: uninitialized urandom read (4 bytes read, 54 bits of entropy available) dle_pro[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. line_[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. paras[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 1564random: ubusd: uninitialized urandom read (4 bytes read, 58 bits of entropy available) SSID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. handle_proline_paras 1564 WPAPSK:12345678. random: ubusd: uninitialized urandom read (4 bytes read, 60 bits of entropy available) handle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 web_passwd:1234. handle_proline_paras 1564 SerialNumber:FHTT12345678. parse proline para Password fail. parse proline para Password fail. handle_proline_paras 1564 Mode:GPON. root.mesh.apclibh.entry.1:BhProfileSsid not found. root.mesh.apclibh.entry.1:BhProfileWpaPsk not found. root.mesh.apclibh.entry.2:BhProfileSsid not found. root.mesh.apclibh.entry.2:BhProfileWpaPsk not found. handle_proline_paras 1564 (null):1. cfg_save_object: open file [/tmp/var/romfile.cfg] fail ----> Load config file fail. svc_cfg_start: ........ ok [20001030]! svchost_get_event_val: get param fail [0] start omci module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint random: ubusd: uninitialized urandom read (4 bytes read, 73 bits of entropy available) svchost_parse_print_conf: Path = /lib/libcentral_ctrl_svc.so svchost_parse_print_conf: Entry = svc_central_ctrl_main svchost_parse_print_conf: Param = 111 ecnt_register_cpu_interrupts svchost_p random: ubusd: uninitialized urandom read (4 bytes read, 78 bits of entropy available) arse_print_conf: Path = /lib/libpon_svc.so svchost_parse_print_conf: Entry = svc_pon_main svchost_parse_print_conf: Param = 111 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Mar 19 2024-09:20:52). led path:/userfs/7529_62led.conf random: ubusd: uninitialized urandom read (4 bytes read, 80 bits of entropy available) svc_centrl_ctrl_init: ...... reg event ok PID=5dev mount is start! 5config 0 0 event receive pthread_create OK, keep going...... open /proc/tc3162/reset_button faile. open /proc/tc3162/button_type faile. open /proc/tc3162/led_switch_button faile. svchost_get_event_val: get param fail [0] random: ubusd: uninitialized urandom read (4 bytes read, 83 bits of entropy available) svchost_get_event_val: get param fail [0] svc_tccicmd V1.1.0.0 (Mar 19 2024-09:20:58) pERROR!Create /etc/fwTCver.conf fail! on_int: ...... reg event ok svc_pon_int: ...... reg method ok cfg svc load done, 0 ms [svc_cfg_load_special_info][581]SET [omci_lib_set_max_ports_list] Result=0 Couldn't open mtd:reservearea! mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Res SIFMaster 0.1 init ===== Interface 0 is ON ===== Register sifm cmd ult=0 insmod: can't insert '/lib/modules/crypto_k.ko': No such file or directory mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlnlksock_create:nlksock create err:Protocol not supported! ockactive_notify_handler: nlksock_create fail ing reservearea ... Could not open mtd device: reservearea random: ubusd: uninitialized urandom read (4 bytes read, 101 bits of entropy available) Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device(gdump_mode_sel): GDUMP sel has switch to 3 ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215 : reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][661]SET [oam_lib_set_hardware_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea .random: nonblocking pool is initialized .. Could not open mtd device: reservearea Can't open /ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:3 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:7 eifc_set_action: cpu:1, nbq:8 tc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0 macType = 0 flashQdmaInit = 0x33 TP_User Ecnt ponTime:OMCI Startup netif_napi_add() called with weight 256 on device lan_int2_if ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: D8:44:89:BD:CF:D8 Use Internal switch ,type 10 tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9 GE Rext AnaCal Done! (7)(0x27) GE Rext AnaCal Done! (7)(0x27) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (5)(0x24) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (8) (0x28) GE Tx amp AnaCal Done! (14) (0x2e) Unlocking config ... Could not open mtd device: config GE Tx amp AnaCal Done! (14) (0x2e) [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (6)(0x25) GE Tx amp AnaCal Done! (1) (0x21) GE Tx amp AnaCal Done! (7) (0x27) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (15) (0x2f) [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE Tx offset AnaCal Done! (3)(0x22) GE Tx offset AnaCal Done! (10)(0x29) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (6)(0x25) GE Tx amp AnaCal Done! (11) (0x2b) GE Tx amp AnaCal Done! (9) (0x29) GE Tx amp AnaCal Done! (17) (0x31) GE Tx amp AnaCal Done! (12) (0x2c) [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (3)(0x22) GE Tx amp AnaCal Done! (2) (0x22) GE Tx amp AnaCal Done! (11) (0x2b) GE Tx amp AnaCal Done! (2) (0x22) GE Tx amp AnaCal Done! (14) (0x2e) [tcPhyInit] in mount: can' not found str : MAP, erase and mount again tdev_mount is ok find /dev/mtdblock in /etc/fstab [tcPhyInit] out , r31 = (12, 0x0) eth0: starting interface. netif_start_queue macType = 0 flashQdmaInit = 0x33 fe resource init start 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left Ralink HW NAT Module Enabled you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512 HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384 IP check use Black List EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw [c0847268]isForceToCpu=0:0 copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xd0f00000 copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xd0b80000 [C0]core freq at 333000000 Hz [C0]timer_init: Timer clk is running at 125 Mhz [C0]wcid_counter_init:0 [C0]wcid_counter_init:1 [C0][NPU] ba_node_init... [C0]baNode_array_init [C0]counter_init:2 [C0][NPU] queue_mutex_init... [C0]qdma_init [C1]core1_main [C2]timer_isr Store Value 1e903000, val[C2]core2_main [C3]core3_main [C3]do npu_enq_deq_init [c0847244]npu_pkt_buf_addr=8dff37c0 npu_wifi_offload_get_pkt_buf_addr=8dff37c0 [c0847244]npu_pkt_buf_addr=8dff37c0 [C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=8dff37c0, 8dff37c0 npu_wifi_offload_get_force_to_cpu_flag=0 isForceToCpu=0 [C0](core0_main) just return, because QDMA driver for ARM is not ready whnat_module_init(): module init and register callback for whnat create whnat_ctrl ok!!! wed_slot_map_get(): assign slot_id:0 for entry: 0! wed_slot_map_get(): assign slot_id:1 for entry: 1! tso_lan: tso_v2.c [201]: dscpDmaAddr =8aac0000 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_proc_init. val_string:add v4 - 445 - - dport:0, sport:445, daddr:0, saddr:0 ---- 7570_bob.conf ---- ---- cp -f /etc/7570_bob.conf /tmp/ ---- do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=17 data[1]=04 data[2]=30 data[3]=04 do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success! ---- flashtool readflashtobob ---- ______ XPON_PHY init ______ little endian NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0 xPON PHY initialization done E3 patched EN7571 found! FLASH matrix got PWRADC offset = 0x33b8 PWRADC ready BG 1.76V = 0x286 BG 0.875V = 0x141 RSSI_Vref = 0x20f RSSI_V = 0x29a eFuse value = 0xe eFuse offset = 4.2'C Start GPON Tx Calibration CDR disabled RGS_T0C = 0x42 RGS_T1C = 0x43 CDR enabled APD initialization done en7571_reg_init Initial current loaded PWR/ER loaded TIASD = 0x26 Rx LOS is set Internal DDMI Enabled KT Enabled EN7571 Initialization Done! PON PHY driver version is 2100825.116.11 xPON driver initialization Alloc data struct memory successful, 36508 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 XPON Mapping Module init OK! vtag_drv_init tc_multiwan version: tcsmux V1.1.0.0 (Mar 19 2024-09:21:03). pon_vlan_init Multi Lan port initilize xpon igmp module....done! pon_mac_filter_init Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon_ PPTP VPN offload module init multicast.ko': No such file or directory L2TP VPN offload module init device eth0 entered promiscuous mode device eth0.1 is not a slave of br0 device eth0.2 is not a slave of br0 device eth0.3 is not a slave of br0 device eth0.4 is not a slave of br0 device eth0 is already a member of a bridge; can't enslave it to bridge br0. device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready device eth0.1 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready device eth0.2 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready device eth0.3 entered promiscuous mode device eth0.4 is not a slave of br0 ifconfig: ioctl 0x8913 failed: No such device interface eth0.5 does not exist! insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory ifconfig: SIOCSIFMTU: Invalid argument vlan tag restore switch : enable insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory start ponmgr_cfg MTK DSP support rcS (443): drop_caches: 3 set pptp_offload proto value 1 rcS.sdk init done! creat_domain_proc ok tp_domain init ok VoIPBasic_Common SIPProtocol is SIP prevSipStatus: 0, curSipStatus: 0 voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0 [1970-1-1 Thu 00:00:15.550268]omci start! [1970-1-1 Thu 00:00:15.554449]main gponOmciCmsgsrvInit device recognition register success [1970-1-1 Thu 00:00:15.579718]OMCI wait for DM init... status: DSPCore[Ver:TVB1.0.23.800-4-P102-1] [1] PCM V2.4 (Dec 18 2023 23:20:57) bind irq-113 to CPU1 PCM_INT=28 pcm[Ver:TVB1.0.23.800-4-P102-1] lec[Ver:TVB1.0.23.800-4-P102-1] SYS_HCLK=250 Major Num:233, device: spi spi[Ver:TVB1.0.23.800-4-P102-1] [16.057][cos] 422 - ERROR: before cpu mask 00000003 [16.062][cos] 437 - ERROR: after cpu mask 00000001 ========fxs3 init start======== ========fxs3 init complete======== . init mod-slic3 slic3[Ver:TVB1.0.23.800-1] mode= ISI init mod-ksocket ksocket[Ver:TVB1.0.23.800-1] monitor value xxxxxxx ortp[Ver:TVB1.0.23.800-4-P102-1] init mod-acodec acodec[Ver:TVB1.0.23.800-4-P102-1] ponTime:ONU Ready init mod-foip3 foip3[Ver:TVB1.0.23.800-4-P102-1] mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea ponTime:Connection Start working_mode: 10 [42949390020ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0 ==> EPON OAM Start need 1s:4294266991us Interface name length cannot exceed 15 characters. Silabs SLIC type selected by SW makefile compile option [4294939013][slic][INFO][gpio_clocksrc_init:L2399]ISI [4294939014][spi][INFO][SPI_Reset:L473] SPI_Reset 2 Interface name length cannot exceed 15 characters. slic deviceVerify ProSLIC_Version 9.1.0 Silabs SLIC Reset REG_0 = 0xaa ,device[0], Part_num 0x5, Revision 0x2 device[0]:deviceVerify Success! SPI Reset times:1 pcm1 ch num:1 pcm2 ch num:0 fxs[Ver:TVB1.0.23.800-4-P102-1] [fxs_init_action](1344)noinit=0 pcm1 ch num:1 pcm2 ch num:0 Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1) deviceInit on DeviceId = 0 ProSLIC_createControlInterface = 0 ProSLIC_createDevice = 0 get_start_chanid=0 ProSLIC_createChannel = 0 ProSLIC_SWInitChan = 0 device [0] chanPvt[0].chanType 1 device [0] chanPvt[0].chipType 6 Si3218x_Init_with_Options(640) size = 1 init_opt = 0 SiVoice: Channel 0: Type = PROSLIC Rev = 2 ProSLIC:loading patch: 06302015 . [42949391030ms][phy_init.c:1946] PON PHY scu_reset_init mode=10 [42949391030ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1 [42949391030ms][phy_init.c:1946] PON PHY scu_reset_init mode=1 [42949391050ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1 Auto GPON Si3218x: Channel 0 : VBAT Up = 58.849 v ProSLIC:Starting LB Cal on channel 0 .init mod-vdsp for 1 channels 2 sessions vdsp[Ver:TVB1.0.23.800-4-P102-1] =============================== || MTK DSP init successfully || =============================== pid 2's current affinity mask: 3 pid 889's current affinity mask: 1 IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready ___ COUNTRY SETTING ___ ring_idx : 0 imp_idx : 0 ProSLIC:PCMStart slic_set_gainLv - fffffffa / 0 pid 889's new affinity mask: 2 fxsSetLine[0]state 0x9 State UNKNOWN ! pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 1073'Dump SLIC[0] register: ================================= 00 01 02 03 04 05 06 07 08 09 s ================================= 00: aa 00 00 1f 00 40 00 a2 e5 ff 10: 25 13 00 00 00 20 00 00cu 00 00 20: 00 00 00 02 00 00 00 00 00 00 30: 11 00 00 10 00 00 00 02 00 40 40: 1f 00 7d 00 00 59 04 10 66 00 r50: 00 00 00 00 00 00 00 00 ff 00 60: 00 00 e4 00 00 00 00 00 f0 00 70: 00 00 00 00 00 00 02 00 00 00 80: 3f 01r b7 03 af 05 0e 0f ed 10 90: 40 07 9f 06 c1 11 24 05 80 05 100: 00 01 00 00 00 00 00 00 00 00 110: 00 00 47 01e 41 00 02 ff 38 00 120: 87 05 87 05 00 20 03 00 ================================= nt affinitwrite address(47) value : 0x8 y mask: 1 pid 1073's new affinity mask: 2 [21.019][cos] 317 - ERROR: checkMiscSize: MTD_OFS_PC_HISTORY_ADDR(3e60000) + MTD_OFS_PC_HISTORY_SIZE(60000) = (3ec0000) /etc/init.d/rcS: line 195: can't create /proc//oom_score_adj: nonexistent directory [21.135][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml rcS (443): drop_caches: 3 rcS init done! Please press Enter to activate this console. sleep 90s! [21.995][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002 [21.Disable GPON ONU 999][cos] 715 - ERROR: Disable gpon driver before true SN set [22.004][cos] 253 - ERROR: COS wait for OMCI init... [22.005][cos] 259 - ERROR: OMCI init use 0 seconds! ===========>manufacture:0, ISPflag:0 IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 interface eth0.5 does not exist! device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready [1970-1-1 Thu 00:00:22.730146]DM init use 7 seconds! device eth0.4 entered promiscuous mode [1970-1-1 Thu 00:00:22.740298]OMCI wait for RSL init... ifconfig: ioctl 0x8913 failed: No such device sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory interface eth0.5 does not exist! br_agc: port 2(eth0.2) entered forwarding state br_agc: port 2(eth0.2) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br_agc: link becomes ready updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 sendto: No such file or directory line(593) Msg.type(2014) pid(859) errno(2) ret(-1) [ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf [24.940][cos] 121 - ERROR: CQC:tm_start:24, tm_end:24 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [26.950][cos] 121 - ERROR: CQC:tm_start:24, tm_end:26 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [28.960][cos] 121 - ERROR: CQC:tm_start:24, tm_end:28 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [30.970][cos] 121 - ERROR: CQC:tm_start:24, tm_end:30 [30.970][cos] 137 - ERROR: CQC:FAILED! [30.970][cos] 775 - ERROR: Expire time! device eth0.1 left promiscuous mode br_agc: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br_agc: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br_agc: port 3(eth0.3) entered disabled state device eth0.4 left promiscuous mode br_agc: port 4(eth0.4) entered disabled state interface eth0.5 does not exist! [31.292][cmm] 591: num of CPU core = 2. [31.293][cmm] 601: parent pid 859 [31.396][cmm] 608: start creating dropbear RSA key at CPU core 1. [31.397][cmm] 618: child pre cpu mask 00000001 [31.397][cmm] 632: child post cpu mask 00000002 [31.398][cmm] 636: Try create dropbear RSA key loop=0 ... [31.563][cmm] 3192 - ERROR: Open TZ file error! Generating 2048 bit rsa key, this may take a while... ddns_ud> start enable = 0, server: , auth: , request killall: dnsmasq: no process killed [32.062][cmm] 158 - WARN: Empty DNSServer() [32.221][cmm] 158 - WARN: Empty DNSServer() [32.229][cmm] 158 - WARN: Empty DNSServer(0.0.0.0,0.0.0.0) bridge name br0 has exist bridge name br0 has exist device br0 already exists; can't create bridge with the same name IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready done [32.542][cmm] 203 - ERROR: ifName is eth0, vid is 5 [32.562][cmm] 203 - ERROR: ifName is eth0, vid is 4 vconfig: ioctl error for add: File exists [32.575][cmm] 203 - ERROR: ifName is eth0, vid is 3 vconfig: ioctl error for add: File exists [32.588][cmm] 203 - ERROR: ifName is eth0, vid is 2 vconfig: ioctl error for add: File exists [32.601][cmm] 203 - ERROR: ifName is eth0, vid is 1 vconfig: ioctl error for add: File exists [32.614][cmm] 203 - ERROR: ifName is eth0, vid is 0 sh: can't create /proc/tplink/eth_vlan: nonexistent directory device eth0.1 entered promiscuous mode [32.749][cmm] 257 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName: Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [32.768][ipv6] 1015 - WARN: Could not find pid of dibbler-server with interface name is br0! [32.773][ipv6] 619 - ERROR: Can't find interface: br0 [32.784][ipv6] 1380 - WARN: Could not find pid of radvd with interface name is br0! device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready device eth0.3 entered promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state br0: port 2(eth0.2) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state br0: port 3(eth0.3) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 device eth0 entered promiscuous mode br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode device eth0.5 is not a slave of br0 iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. [33.475][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public [33.475][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next. [33.476][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public [33.476][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next. [33.477][cmm] 2023 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0 ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ra0: ===> main_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT load l1profile succeed! WHNAT=1 whnat_cap_support(): chip_id=7915 is in WHNAT support list wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 wed_init(1): irq=91,base_addr=0xd57b8000 ----->wed_tx_ring_init() 805 len=40 ----->wed_tx_ring_init() 816 len=98376 sizeof(whnat_ring)=49188, ring_ctrl->ring_num=2 tx_ring_init() whnat_dma_buf_alloc for glb_ring_ctrl_desc[0]=32768 tx_ring_init() whnat_dma_buf_alloc for glb_ring_ctrl_desc[1]=32768 wed_ring_init(): wed ring init result = 0 token_info_init() whnat_dma_buf_alloc for glb_wed_buf_res=114688 whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]=917504 ---------> token_info_alloc() len=372736, eid=7168, sizeof(struct wed_token_info)=52 skb_len=1900 create wed ok!!! wdma_init(): wdma(1) base addr=d58ca400 wdma_init(): wdma(1) irq[0]=87 wdma_init(): wdma(1) irq[1]=88 wdma_init(): wdma(1) irq[2]=89 rx_ring_init() whnat_dma_buf_alloc for glb_wdma_rx_ring_ctrl[0]=16384 rx_ring_init() whnat_dma_buf_alloc for glb_wdma_rx_ring_ctrl[1]=16384 wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91 wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_probe(): probe fail since whnat is full! whnat_dev0: probe of 1fa02000.wed2 failed with error -1 mt_service_open: wlan service opens successfully! APWdsInitialize():WdsEntry[0~15] multi_profile_merge_radius_key:RTMPGetKeyParameter 717 fail![multi_profile_merge_5g_only] DBDC_MODE=1 multi-profile merge success, en:1,pf1_num:7,pf2_num:7,total:14 Open file "/var/Wireless/RT2860AP/DBDC_card0.dat" to store DBDC cfg! (23) Write file "/var/Wireless/RT2860AP/DBDC_card0.dat" success (size=8228)! BssidNum=14 Pf2MbssIdxMap: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 MacAddress7 = 00:00:00:00:00:00 E2pAccessMode=2 SSID[0]=TP-Link_CFD8, EdcaIdx=0 SSID[1]=TP-Link_CFD8_1, EdcaIdx=0 SSID[2]=TP-Link_CFD8_2, EdcaIdx=0 SSID[3]=TP-Link_CFD8_Guest, EdcaIdx=0 SSID[4]=26e3d8a1df367885e74acba9a98bad, EdcaIdx=0 SSID[5]=aa9a343d07a79aa66ef85877e21dee, EdcaIdx=0 SSID[6]=e2b6520c958f5e14820332d7ee1a39, EdcaIdx=0 SSID[7]=TP-Link_CFD8, EdcaIdx=0 SSID[8]=TP-Link_CFD8_1, EdcaIdx=0 SSID[9]=TP-Link_CFD8_2, EdcaIdx=0 SSID[10]=TP-Link_CFD8_Guest, EdcaIdx=0 SSID[11]=1b34392d9f7a4e17d86ba5fb123da0, EdcaIdx=0 SSID[12]=c6e19271450d7592b4d756a75474eb, EdcaIdx=0 SSID[13]=895292acce55edb97159c9a0006ea6, EdcaIdx=0 RTMPSetProfileParameters(): DBDC Mode=1, eDBDC_mode = 1 cfg_mode=16 cfg_mode=16 cfg_mode=16 wmode_band_equal(): Band Equal! cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 auto_ch_select_set_cfg(): BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: Index0 Channel=1 RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: Index1 Channel=36 BndStrgBssIdx=1;0;0;0;0;0;0;1;0;0;0;0;0;0 [TxPower] BAND0: 100, BAND1: 100 [SKUenable] BAND0: 1, BAND1: 1 [PERCENTAGEenable] BAND0: 1, BAND1: 1 profile: FragThreshold[0]=2346 profile: FragThreshold[1]=2346 profile: FragThreshold[2]=2346 profile: FragThreshold[3]=2346 profile: FragThreshold[4]=2346 profile: FragThreshold[5]=2346 profile: FragThreshold[6]=2346 profile: FragThreshold[7]=2346 profile: FragThreshold[8]=2346 profile: FragThreshold[9]=2346 profile: FragThreshold[10]=2346 profile: FragThreshold[11]=2346 profile: FragThreshold[12]=2346 profile: FragThreshold[13]=2346 APEdca0 Valid=1 APAifsn[0]=3 APAifsn[1]=7 APAifsn[2]=1 APAifsn[3]=1 APEdca1 Valid=1 APAifsn[0]=3 APAifsn[1]=7 APAifsn[2]=1 APAifsn[3]=1 APEdca2 APEdca3 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 UAPSDCapable[0]=0 UAPSDCapable[1]=0 UAPSDCapable[2]=0 UAPSDCapable[3]=0 UAPSDCapable[4]=0 UAPSDCapable[5]=0 UAPSDCapable[6]=0 UAPSDCapable[7]=0 UAPSDCapable[8]=0 UAPSDCapable[9]=0 UAPSDCapable[10]=0 UAPSDCapable[11]=0 UAPSDCapable[12]=0 UAPSDCapable[13]=0 default ApCliUAPSDCapable[0]=0 default ApCliUAPSDCapable[1]=0 DfsZeroWait Support=0/0 DfsZeroWaitCacTime=255/255 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[0] read_itxbf: MBSS[0] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[1] read_itxbf: MBSS[1] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[2] read_itxbf: MBSS[2] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[3] read_itxbf: MBSS[3] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[4] read_itxbf: MBSS[4] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[5] read_itxbf: MBSS[5] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[6] read_itxbf: MBSS[6] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[7] read_itxbf: MBSS[7] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[8] read_itxbf: MBSS[8] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[9] read_itxbf: MBSS[9] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[10] read_itxbf: MBSS[10] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[11] read_itxbf: MBSS[11] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[12] read_itxbf: MBSS[12] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[13] read_itxbf: MBSS[13] ITxBfEn = 1 read_itxbf: Common.ITxBfEn = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[0] read_etxbf: MBSS[0] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[1] read_etxbf: MBSS[1] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[2] read_etxbf: MBSS[2] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[3] read_etxbf: MBSS[3] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[4] read_etxbf: MBSS[4] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[5] read_etxbf: MBSS[5] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[6] read_etxbf: MBSS[6] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[7] read_etxbf: MBSS[7] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[8] read_etxbf: MBSS[8] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[9] read_etxbf: MBSS[9] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[10] read_etxbf: MBSS[10] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[11] read_etxbf: MBSS[11] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[12] read_etxbf: MBSS[12] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[13] read_etxbf: MBSS[13] ETxBfEnCond = 1 MBSS[0] MuOfdmaDlEnable = 0 MBSS[1] MuOfdmaDlEnable = 0 MBSS[2] MuOfdmaDlEnable = 0 MBSS[3] MuOfdmaDlEnable = 0 MBSS[4] MuOfdmaDlEnable = 0 MBSS[5] MuOfdmaDlEnable = 0 MBSS[6] MuOfdmaDlEnable = 0 MBSS[7] MuOfdmaDlEnable = 0 MBSS[8] MuOfdmaDlEnable = 0 MBSS[9] MuOfdmaDlEnable = 0 MBSS[10] MuOfdmaDlEnable = 0 MBSS[11] MuOfdmaDlEnable = 0 MBSS[12] MuOfdmaDlEnable = 0 MBSS[13] MuOfdmaDlEnable = 0 MBSS[0] MuOfdmaUlEnable = 0 MBSS[1] MuOfdmaUlEnable = 0 MBSS[2] MuOfdmaUlEnable = 0 MBSS[3] MuOfdmaUlEnable = 0 MBSS[4] MuOfdmaUlEnable = 0 MBSS[5] MuOfdmaUlEnable = 0 MBSS[6] MuOfdmaUlEnable = 0 MBSS[7] MuOfdmaUlEnable = 0 MBSS[8] MuOfdmaUlEnable = 0 MBSS[9] MuOfdmaUlEnable = 0 MBSS[10] MuOfdmaUlEnable = 0 MBSS[11] MuOfdmaUlEnable = 0 MBSS[12] MuOfdmaUlEnable = 0 MBSS[13] MuOfdmaUlEnable = 0 MBSS[0] MuMimoDlEnable = 1 MBSS[1] MuMimoDlEnable = 1 MBSS[2] MuMimoDlEnable = 1 MBSS[3] MuMimoDlEnable = 1 MBSS[4] MuMimoDlEnable = 1 MBSS[5] MuMimoDlEnable = 1 MBSS[6] MuMimoDlEnable = 1 MBSS[7] MuMimoDlEnable = 1 MBSS[8] MuMimoDlEnable = 1 MBSS[9] MuMimoDlEnable = 1 MBSS[10] MuMimoDlEnable = 1 MBSS[11] MuMimoDlEnable = 1 MBSS[12] MuMimoDlEnable = 1 MBSS[13] MuMimoDlEnable = 1 MBSS[0] MuMimoUlEnable = 1 MBSS[1] MuMimoUlEnable = 1 MBSS[2] MuMimoUlEnable = 1 MBSS[3] MuMimoUlEnable = 1 MBSS[4] MuMimoUlEnable = 1 MBSS[5] MuMimoUlEnable = 1 MBSS[6] MuMimoUlEnable = 1 MBSS[7] MuMimoUlEnable = 1 MBSS[8] MuMimoUlEnable = 1 MBSS[9] MuMimoUlEnable = 1 MBSS[10] MuMimoUlEnable = 1 MBSS[11] MuMimoUlEnable = 1 MBSS[12] MuMimoUlEnable = 1 MBSS[13] MuMimoUlEnable = 1 [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=3, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=4, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=5, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=6, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=7, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=8, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=9, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=10, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=11, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=12, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=13, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=3, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=4, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=5, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=6, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=7, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=8, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=9, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=10, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=11, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=12, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=13, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=3, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=4, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=5, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=6, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=7, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=8, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=9, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=10, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=11, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=12, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=13, Desired PMFSHA256=0 ReadMboParameterFromFile::(bMboEnable[0]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[1]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[2]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[3]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[4]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[5]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[6]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[7]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[8]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[9]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[10]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[11]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[12]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[13]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[0]=1) ReadMboParameterFromFile::(bMboEnable[1]=1) MAP_MODE=3 ApCliEntry[0].Enable=0 ApCliEntry[1].Enable=0 IGMP deny list [0]-th entry =224.0.0.1 IGMP deny list [1]-th entry =224.0.0.2 IGMP deny list [2]-th entry =224.0.0.4 IGMP deny list [3]-th entry =224.0.0.5 IGMP deny list [4]-th entry =224.0.0.6 IGMP deny list [5]-th entry =224.0.0.7 IGMP deny list [6]-th entry =224.0.0.8 IGMP deny list [7]-th entry =224.0.0.9 IGMP deny list [8]-th entry =224.0.0.12 IGMP deny list [9]-th entry =224.0.0.16 IGMP deny list [10]-th entry =224.0.0.17 IGMP deny list [11]-th entry =224.0.0.22 IGMP deny list [12]-th entry =224.0.0.251 IGMP deny list [13]-th entry =224.0.0.252 IGMP deny list [14]-th entry =232.0.0.100 IGMP deny list [15]-th entry =239.255.12.42 IGMP deny list [16]-th entry =239.255.255.250 rtmp_read_wds_from_file(): WDS Profile WDS Number: band[0]=0, band[1]=0 WDS-Enable mode=0 WDS-Enable mode=0 HT_BAWinSize: wdev[0]: (TX=256, RX=256) HT_BAWinSize: wdev[1]: (TX=256, RX=256) HT_BAWinSize: wdev[2]: (TX=256, RX=256) HT_BAWinSize: wdev[3]: (TX=256, RX=256) HT_BAWinSize: wdev[4]: (TX=256, RX=256) HT_BAWinSize: wdev[5]: (TX=256, RX=256) HT_BAWinSize: wdev[6]: (TX=256, RX=256) HT_BAWinSize: wdev[7]: (TX=256, RX=256) HT_BAWinSize: wdev[8]: (TX=256, RX=256) HT_BAWinSize: wdev[9]: (TX=256, RX=256) HT_BAWinSize: wdev[10]: (TX=256, RX=256) HT_BAWinSize: wdev[11]: (TX=256, RX=256) HT_BAWinSize: wdev[12]: (TX=256, RX=256) HT_BAWinSize: wdev[13]: (TX=256, RX=256) HT: WDEV[0] Ext Channel = BELOW HT: WDEV[1] Ext Channel = BELOW HT: WDEV[2] Ext Channel = BELOW HT: WDEV[3] Ext Channel = BELOW HT: WDEV[4] Ext Channel = BELOW HT: WDEV[5] Ext Channel = BELOW HT: WDEV[6] Ext Channel = BELOW HT: WDEV[7] Ext Channel = BELOW HT: WDEV[8] Ext Channel = BELOW HT: WDEV[9] Ext Channel = BELOW HT: WDEV[a] Ext Channel = BELOW HT: WDEV[b] Ext Channel = BELOW HT: WDEV[c] Ext Channel = BELOW HT: WDEV[d] Ext Channel = BELOW 0:ra0 TWTsupport = 0 1:(null) TWTsupport = 0 2:(null) TWTsupport = 0 3:(null) TWTsupport = 0 4:(null) TWTsupport = 0 5:(null) TWTsupport = 0 6:(null) TWTsupport = 0 7:(null) TWTsupport = 0 8:(null) TWTsupport = 0 9:(null) TWTsupport = 0 10:(null) TWTsupport = 0 11:(null) TWTsupport = 0 12:(null) TWTsupport = 0 13:(null) TWTsupport = 0 rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect pAd->reg_domain = 1 WtcSetMaxStaNum: MaxStaNum:224, BssidNum:14, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:273 Top Init Done! Use dev_alloc_skb token_tx_queue_init(): ct sw token number = 1023 token_tx_queue_init(): token que inited done!id_head/tail=0/1024 token_tx_queue_init(): cbff5404,cbff5404 token_rx_init(): alloc mem for glb_var_wifi_rx_q_token_idx1. size:64*15360=983040 TxRing[0]: attr:0, total 2048 entry initialized TxRing[1]: attr:0, total 2048 entry initialized DriverModel=1 !!!! do phy and virtual address mapping dramBaEntry_pa=86e00000 PCIE Port0 link down [C0][NPU] npu_set_pcie_base, addr=200d4500, band_idx=0 [C0][npu_set_pcie_base] 2.4G pcieBase 200d4500 mem_base 200d4500, hw_rx_desc=0 PCIE Port1 link up [C0][NPU] npu_set_pcie_base, addr=200d4510, band_idx=1 [C0][npu_set_pcie_base] 5G pcieBase 200d4510 mem_base 200d4510, hw_rx_desc=0 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7915D_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:0 [C0][NPU] Enter(2.4G) npu_npu_init_rxd, band_idx=0, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020 AllocSize 6000 AllocVa d5ce8020, .AllocPa 1e806020 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7915D_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:1 [C0][NPU] Enter npu_npu_init_rxd_5G, band_idx=1, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000 AllocSize 6000 AllocVa d5cec000, .AllocPa 1e800000 RX[2] DESC d1042000 size = 8192 RX[3] DESC d1045000 size = 16384 RX[4] DESC d104a000 size = 8192 register rx data done task cc601154 =====>register 2G hostdapt_registe_wifitask 0 =====>register 5G hostdapt_registe_wifitask 1 [3-->TX_RING_0[0xd7300]: Attr:0, Base=0x8c620000, Cnt=2048! -->TX_RING_1[0xd7310]: Attr:0, Base=0x8c628000, Cnt=2048! -->TX_RING_2[0xd5400]: Attr:3, Base=0x8c604000, Cnt=128! -->TX_RING_3[0xd5410]: Attr:2, Base=0x8c605000, Cnt=256! -->TX_RING_4[0xd5440]: Attr:1, Base=0x8c606000, Cnt=256! -->RX_RING_0[0xd4500]: Base=0x1e806020, Cnt=1536 -->RX_RING_1[0xd4510]: Base=0x1e800000, Cnt=1536 -->RX_RING_2[0xd5500]: Base=0x8c634000, Cnt=512 -->RX_RING_3[0xd7410]: Base=0x8c790000, Cnt=1024 -->RX_RING_4[0xd5520]: Base=0x8bda4000, Cnt=512 wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 Hif Init Done! 5.587][cmm] 648: create dropbear RSpci_driver_own_by_port: success to clear p=0 fw own, from(1): 1 is interrupt mode, 2 is polling mode. driver_own: port=1 is not enabled fw_prepare():using E2 ROM patch fw_prepare():using E2 RAM Parsing patch header Built date: 20230828104359a Platform: ALPS HW/SW version: 0x8a108a10 Patch version: 0xffffffff Section num: 0x2, subsys: 0x4 Section 0: type = 0x30002, offset = 0xe0, size = 0xfc90 Target address: 0x200000, length: 0xfc90 Section 1: type = 0x30002, offset = 0xfd70, size = 0x13730 Target address: 0xe000f000, length: 0x13730 APatch SEM Status = 2 key success. [3patch is not ready && get semaphore success Start address = 0x200000, DL length = 64656, Data mode = 0x80000000 5.587][cmm] 6EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) 55: sStart address = 0xe000f000, DL length = 79664, Data mode = 0x80000000 tart creatingEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) dropMtCmdPatchFinishReq bear DSS key at CPU core 1. [35.587][cmm] EventGenericEventHandler: CMD Success 65Patch SEM Status = 3 release patch semaphore  WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0  Parsing CPU 0 fw tailer Chip ID: 0x0b Eco version: 0x01 Region number: 0x07 Format version: 0x02 Format flag: 0x01 Ram version: ____000000 Built date: 20230828104432 Common crc: 0x68378479 Parsing tailer region 0 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x21fc00 Download size: 110592 Feature set: 0x20 Parsing tailer region 1 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x31dc00 Download size: 205824 Feature set: 0x00 Parsing tailer region 2 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x417400 Download size: 31744 Feature set: 0x00 Parsing tailer region 3 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0022800 Download size: 411136 Feature set: 0x00 Parsing tailer region 4 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0086e00 Download size: 332288 Feature set: 0x00 Parsing tailer region 5 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x23ac00 Download size: 87040 Feature set: 0x00 Parsing tailer region 6 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x400000 Download size: 81920 Feature set: 0x00 Release info: header tag = 0, total length = 64 tag 1, padding length = 2, tag length = 58 payload: t-neptune-mp-mt7915-2045-MT7915_MP_7_4_2045-20230828103801 Start address = 0x21fc00, DL length = 110592, Data mode = 0x80000000 9: Try create EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) dropbeStart address = 0x31dc00, DL length = 205824, Data mode = 0x80000000 ar DSS key looEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) p=0 ... GenStart address = 0x417400, DL length = 31744, Data mode = 0x80000000 erating 1024 EventGenericEventHandler: CMD Success bMtCmdAddressLenReq:(ret = 0) itStart address = 0xe0022800, DL length = 411136, Data mode = 0x80000000 dss key, thisEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) may take a while... [Start address = 0xe0086e00, DL length = 332288, Data mode = 0x80000000 read_dhcpc_cEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) onfig ] 128: error,Start address = 0x23ac00, DL length = 87040, Data mode = 0x80000000 unable to opeEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) n conStart address = 0x400000, DL length = 81920, Data mode = 0x80000000 fig file: /varEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) /tmp/MtCmdFwStartReq: override = 0x1, address = 0x21fc00 dconf/udhcpc.EventGenericEventHandler: CMD Success cParsing CPU 1 fw tailer Chip ID: 0x00 Eco version: 0x01 Region number: 0x03 Format version: 0x02 Format flag: 0x01 Ram version: DEV_000000 Built date: 20230828104451 Common crc: 0x6c78177a Parsing tailer region 0 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x10200000 Download size: 90032 Feature set: 0x00 Parsing tailer region 1 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x10300000 Download size: 16592 Feature set: 0x00 Parsing tailer region 2 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0000000 Download size: 7648 Feature set: 0x00 Release info: header tag = 0, total length = 0 Start address = 0x10200000, DL length = 90032, Data mode = 0x80000010 onf EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x10300000, DL length = 16592, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0000000, DL length = 7648, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 0x4, address = 0x0 EventGenericEventHandler: CMD Success :MtCmdCr4Capability: option(0) MCU Init Done! efuse_probe: efuse = 10000012 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0] rtmp_nv_init(): EEPROM Size[3584] flash_read(): read from address:0x120000, len:0xe00! [EEPROMImage - PreCalImageInfo - PreCalImage - TxDPDImage] [0xcabda000 - 0xcabdae00 - 0xcabdae10 - 0xcabe7220] validFlashEepromID(): eeFlashId=7915, pAd->ChipID=7915 [d-die version:1] [a-die version:2] [36.405][ntpc] 789 - ERROR: open DNS error NTP server list: NICReadEEPROMParameters: EEPROM 0x62 0 [41.149][cmm] 671: create dropbear DSS key success. [41.149][cmm] 680: parent pid 859 [41.149][cmm] 688: parent pre cpu mask 00000001 [41.149][cmm] 702: parent post cpu mask 00000003 now bb MainSsid mac d8:44:89:bd:cf:d8 Country Region from e2p = 0 antenna_default_reset() todo antenna_default_reset() value = 0x5292, TxPath = 2, RxPath = 2 RTMPReadTxPwrPerRate(458): Don't Support this now! rc_radio_init(): DBDC MODE=1, ConcurrentBand=2 rc_radio_init(): radio_ctrl=cc609700,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf rc_radio_init(): radio_ctrl=cc609a58,Band=1,rfcap=3,channel=1,PhyMode=2 extCha=0xf ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 AntCfgInit(2918): Not support for HIF_MT yet! MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku_5g.dat mt7915_check_RF_lock_down: RFlockDown Enable: 0 MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku-bf_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku-bf_5g.dat mt7915_check_RF_lock_down: RFlockDown Enable: 0 EEPROM Init Done! mac_init()--> init_mac_cr()--> <--mac_init() CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 MAC Init Done! BBPInit():BBP Initialization..... Band 0: valid=1, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2 Band 1: valid=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0 BBPInit() todo PHY Init Done! ch_switch_monitor_state_machine_init:: enter ch_switch_monitor_cfg_reset:: enter ch_switch_monitor_cfg_reset:: enter tx_pwr_comp_init():NotSupportYet! Set_SCSDefaultEnable(): BandIdx=0, SCSEnable=1 Set_SCSDefaultEnable(): BandIdx=1, SCSEnable=1 led_send_fw_cmd: 0205000000240000 led_0 map to gpio_18... led_send_fw_cmd: 0205010000340000 led_1 map to gpio_26... MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) ap_ftkd> Initialize FT KDP Module... Main bssid = 00:00:00:00:00:00 SetMuruPlatformTypeProc: param.ucPlatformType = 2 muru_cfg_dlul_limits:(Ret = 1 muru_cfg_dlul_limits:(Ret = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) <==== mt_wifi_init, Status=0 CmdHeraStbcPriorityCtrl: u1BandIdx=0, u1Operation=1, u1StbcPriority=0 CmdHeraStbcPriorityCtrl: u1BandIdx=1, u1Operation=1, u1StbcPriority=0 Register MBSSID IF 1 (ra1) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(1) Register MBSSID IF 2 (ra2) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(2) Register MBSSID IF 3 (ra3) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(3) Register MBSSID IF 4 (ra4) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(4) Register MBSSID IF 5 (ra5) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(5) Register MBSSID IF 6 (ra6) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(6) Register MBSSID IF 7 (rai0) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(7) Register MBSSID IF 8 (rai1) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(8) Register MBSSID IF 9 (rai2) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(9) Register MBSSID IF 10 (rai3) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(10) Register MBSSID IF 11 (rai4) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(11) Register MBSSID IF 12 (rai5) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(12) Register MBSSID IF 13 (rai6) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(13) MSTA_Init (2) ---> ApCli Register MSTA IF (apcli0) , pAd->MSTANum = 1 wdev_init(caller:MSTA_Init+0x200/0x650), wdev(14) Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=0, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 Register MSTA IF (apclii0) , pAd->MSTANum = 2 wdev_init(caller:MSTA_Init+0x200/0x650), wdev(15) Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=0, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 mt_service_init: wlan service inits successfully! WtcSetMaxStaNum: MaxStaNum:222, BssidNum:14, WdsNum:16, MSTANum:2, MaxNumChipRept:32, MinMcastWcid:272 RedInit: set CR4/N9 RED Enable to 1. RedInit: RED Initiailize Done. cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2. ==ecnt_wifi_rx_rps_hook=== RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 0 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 BuildChannelList() BandIdx = 0, PhyMode = 78, ChListNum = 13: phy_oper_init(): operate TxStream = 2, RxStream = 2 phy_freq_adjust : no prim_ch value for adjust! Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=0, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=0 AP inf up for ra_0(func_idx) OmacIdx=0 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x110/0x464)!! mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=1, ctrl_ch2=0, cent_ch=1 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=1, ctrl_ch2=0, cent_ch=1, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) EnableNF: mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=6, ctrl_ch2=0, cent_ch=6, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) Average Power WF0 WF1 WF2 WF3 -128 -128 -128 -128 mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=7, ctrl_ch2=0, cent_ch=7, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=8, ctrl_ch2=0, cent_ch=8, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) EnableNF: mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=9, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=10, ctrl_ch2=0, cent_ch=10, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=11, ctrl_ch2=0, cent_ch=11, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2c8/0x464)!! ==================================================================== Channel 1 : Busy Time = 8707, Skip Channel = FALSE, BwCap = TRUE Channel 2 : Busy Time = 8986, Skip Channel = FALSE, BwCap = TRUE Channel 3 : Busy Time = 3223, Skip Channel = FALSE, BwCap = TRUE Channel 4 : Busy Time = 4735, Skip Channel = FALSE, BwCap = TRUE Channel 5 : Busy Time = 4664, Skip Channel = FALSE, BwCap = TRUE Channel 6 : Busy Time = 6828, Skip Channel = FALSE, BwCap = TRUE Channel 7 : Busy Time = 6079, Skip Channel = FALSE, BwCap = TRUE Channel 8 : Busy Time = 11266, Skip Channel = FALSE, BwCap = TRUE Channel 9 : Busy Time = 11125, Skip Channel = FALSE, BwCap = TRUE Channel 10 : Busy Time = 7351, Skip Channel = FALSE, BwCap = TRUE Channel 11 : Busy Time = 7998, Skip Channel = FALSE, BwCap = TRUE ==================================================================== Rule 3 Channel Busy time value : Select Primary Channel 3 Rule 3 Channel Busy time value : Min Channel Busy = 3223 Rule 3 Channel Busy time value : BW = 20 [SelectClearChannelBusyTime] - band0 END ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 3, IsAband = 0 mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0) zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0 ApAutoChannelAtBootUp<----------------- ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:0, CfgMode:177 [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(0) wifi_sys_linkup, wdev idx = 0 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[0]=0 wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_up: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) Band0 BcnInitedRnd = 32 MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 0 for WscUUIDInit Generate UUID for apidx(0) WDS_Init(): wds_num(0) should be 4 of 2.4G WDS_Init(): wds_num(0) should be 4 of 5G WDS_Init():wds_num[0]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0 Total allocated 0 WDS(es) for band0! ra4: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 4 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=4 AP inf up for ra_4(func_idx) OmacIdx=17 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:4, CfgMode:177 [PMF]APPMFInit:: apidx=4, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(4) wifi_sys_linkup, wdev idx = 4 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[4]=4 wifi_sys_linkup:wdev(type=4,func_idx=1,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_up: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 4 for WscUUIDInit Generate UUID for apidx(4) ra5: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 5 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=5 AP inf up for ra_5(func_idx) OmacIdx=18 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:5, CfgMode:177 [PMF]APPMFInit:: apidx=5, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(5) wifi_sys_linkup, wdev idx = 5 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[5]=5 wifi_sys_linkup:wdev(type=5,func_idx=1,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_up: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 5 for WscUUIDInit Generate UUID for apidx(5) Set_Map_Proc current MAP MODE is 3 Set_MapR2_Proc: MAP R2 is enabled Set_Bh_Bss_Proc ra0 bandIdx = 0 ,DevOwnRole 0x20 Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20 Set_Fh_Bss_Proc ra4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra4 bandIdx = 0 ,DevOwnRole 0x44 Set_Fh_Bss_Proc ra5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra5 bandIdx = 0 ,DevOwnRole 0x48 rt28xx_ap_ioctl interface[ra6](index[6]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[ra6](index[6]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is downrt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down [46.497][cmm] 236 - ERROR: Get map shared buffer error. [46.497][cmm] 1156 - ERROR: Failed to attach map shared memory buffer. [46.497][cmm] 14353 - ERROR: There are no APDevices saved in map shared memory. [46.497][cmm] 17243 - ERROR: Can not find Controller cfg_mode=16 cfg_mode=16 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 BuildChannelList() BandIdx = 0, PhyMode = 78, ChListNum = 13: Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=1, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=2, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=3, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=6, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=14, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 SetEDCCAEnableCtrl: BandIdx = 0 set_vow_airtime_fairness_en: set 0. set_vow_dwrr_max_wait_time: set 1. SetPercentageCtrl: ucBandIdx = 0 SetPercentageCtrl: TxPowerPercentEn = 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 SetPowerDropCtrl: ucPowerDrop = 100 sync for : ra0 sync for : ra4 sync for : ra5 Set_FragThreshold_Proc::set wdev0 FragThreshold=2346) Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 device ra5 entered promiscuous mode br0: port 5(ra5) entered forwarding state br0: port 5(ra5) entered forwarding state device ra4 entered promiscuous mode br0: port 6(ra4) entered forwarding state br0: port 6(ra4) entered forwarding state can't add ra3 to bridge br0: Invalid argument can't add ra2 to bridge br0: Invalid argument can't add ra1 to bridge br0: Invalid argument device ra0 entered promiscuous mode br0: port 7(ra0) entered forwarding state br0: port 7(ra0) entered forwarding state device apcli0 entered promiscuous mode [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 0 ExtEventBeaconLostHandler::FW EVENT (d8:44:89:bd:cf:d8), Reason 0x10 AP Beacon OFF!!! wifi_sys_linkdown:wdev(type=1,func_idx=0,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_down: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wmm_ctrl_release_entry(): Can't find HdevObj or Edca not required wifi_sys_close, wdev idx = 0 hw_ctrl_flow_v2_close: wdev_idx=0 wifi_sys_open(), wdev idx = 0 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=0 wifi_sys_linkup, wdev idx = 0 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[0]=0 wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_up: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 ap_over_lapping_scan(), pAd->CommonCfg.bForty_Mhz_Intolerant:0, pAd->CommonCfg.bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 [PMF]APPMFInit:: apidx=4, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 4 wifi_sys_linkdown:wdev(type=1,func_idx=4,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_down: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 4 hw_ctrl_flow_v2_close: wdev_idx=4 wifi_sys_open(), wdev idx = 4 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=4 wifi_sys_linkup, wdev idx = 4 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[4]=4 wifi_sys_linkup:wdev(type=4,func_idx=1,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_up: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 restart_ap, mbss_idx:4, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 [PMF]APPMFInit:: apidx=5, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 5 wifi_sys_linkdown:wdev(type=1,func_idx=5,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_down: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 5 hw_ctrl_flow_v2_close: wdev_idx=5 wifi_sys_open(), wdev idx = 5 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=5 wifi_sys_linkup, wdev idx = 5 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[5]=5 wifi_sys_linkup:wdev(type=5,func_idx=1,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_up: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 restart_ap, mbss_idx:5, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! WLAN-Start wlNetlinkTool Interface doesn't accept private ioctl... set (8BE2): Network is down Waiting for Wireless Events from interfaces... swWlanChkAhbErr: netlink to do SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 0 MtCmdThermalProtectDutyCfg: duty: 100 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 80 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 1 MtCmdThermalProtectDutyCfg: duty: 80 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 60 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 2 MtCmdThermalProtectDutyCfg: duty: 60 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 20 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 3 MtCmdThermalProtectDutyCfg: duty: 20 SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 5 MtCmdThermalProtectEnable: band_idx: 0, protect_type: 1 MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 120 MtCmdThermalProtectEnable: restore_temp: 114, recheck_time: 5 rai0: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 7 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 BuildChannelList() BandIdx = 1, PhyMode = 177, ChListNum = 9: DfsBuildChannelList(): Done phy_oper_init(): operate TxStream = 2, RxStream = 2  [RadarStateCheck] RD_NORMAL_MODE  phy_freq_adjust : no prim_ch value for adjust! Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=0, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=7 AP inf up for ra_7(func_idx) OmacIdx=0 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) [AutoChSelBuildChannelListFor5G] ChListNum5G = 9 UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x110/0x464)!! mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=36, ctrl_ch2=0, cent_ch=36 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=36, ctrl_ch2=0, cent_ch=36, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=40, ctrl_ch2=0, cent_ch=40 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=40, ctrl_ch2=0, cent_ch=40, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=44, ctrl_ch2=0, cent_ch=44, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=48, ctrl_ch2=0, cent_ch=48 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=48, ctrl_ch2=0, cent_ch=48, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=149, ctrl_ch2=0, cent_ch=149 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=149, ctrl_ch2=0, cent_ch=149, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=153, ctrl_ch2=0, cent_ch=153 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=153, ctrl_ch2=0, cent_ch=153, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=157, ctrl_ch2=0, cent_ch=157 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=157, ctrl_ch2=0, cent_ch=157, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=161, ctrl_ch2=0, cent_ch=161 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=161, ctrl_ch2=0, cent_ch=161, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2c8/0x464)!! ==================================================================== Channel 36 : Busy Time = 1749, Skip Channel = FALSE, BwCap = TRUE Channel 40 : Busy Time = 55, Skip Channel = FALSE, BwCap = TRUE Channel 44 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE Channel 48 : Busy Time = 279, Skip Channel = FALSE, BwCap = TRUE Channel 149 : Busy Time = 408, Skip Channel = FALSE, BwCap = TRUE Channel 153 : Busy Time = 314, Skip Channel = FALSE, BwCap = TRUE Channel 157 : Busy Time = 2327, Skip Channel = FALSE, BwCap = TRUE Channel 161 : Busy Time = 187, Skip Channel = FALSE, BwCap = TRUE ==================================================================== Rule 3 Channel Busy time value : Select Primary Channel 44 Rule 3 Channel Busy time value : Min Channel Busy = 1749 Rule 3 Channel Busy time value : BW = 80 [SelectClearChannelBusyTime] - band1 END sApAutoChannelAtBootUp : Auto channel selection: Selected channel = 44, IsAband = 1 h [RadarStateCheck] RD_NORMAL_MODE  :mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=2, RXStream=2, scan(0) /usr/script/usbhost_load.sh: not found MtCmdSetTxRxPath: ctrl_chl=44, ctrl_ch2=0, cent_ch=42, RxPath=3, BandIdx=1, ChBand=1, BW=2,TXStream=2, RXStream=3, scan(0) DfsBuildChannelList(): Done zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0 ApAutoChannelAtBootUp<----------------- ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:7, CfgMode:78 [PMF]APPMFInit:: apidx=7, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(7) wifi_sys_linkup, wdev idx = 7 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:284 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[7]=7 wifi_sys_linkup:wdev(type=7,func_idx=1,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_up: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) Band1 BcnInitedRnd = 87 MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 7 for WscUUIDInit Generate UUID for apidx(7) WDS_Init(): wds_num(1) should be 4 of 2.4G WDS_Init(): wds_num(1) should be 4 of 5G WDS_Init():wds_num[1]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0 Total allocated 0 WDS(es) for band1! rai4: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 11 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=11 AP inf up for ra_b(func_idx) OmacIdx=17 AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:11, CfgMode:78 [PMF]APPMFInit:: apidx=11, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(11) wifi_sys_linkup, wdev idx = 11 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:283 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[11]=11 wifi_sys_linkup:wdev(type=11,func_idx=1,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_up: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 11 for WscUUIDInit Generate UUID for apidx(11) rai5: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 12 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=12 AP inf up for ra_c(func_idx) OmacIdx=18 AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:12, CfgMode:78 [PMF]APPMFInit:: apidx=12, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(12) wifi_sys_linkup, wdev idx = 12 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:282 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[12]=12 wifi_sys_linkup:wdev(type=12,func_idx=1,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_up: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 12 for WscUUIDInit Generate UUID for apidx(12) Set_Map_Proc current MAP MODE is 3 Set_MapR2_Proc MAP R2 is already enabled Set_Bh_Bss_Proc rai0 bandIdx = 1 ,DevOwnRole 0x20 Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x20 Set_Fh_Bss_Proc rai4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc rai4 bandIdx = 1 ,DevOwnRole 0x44 Set_Fh_Bss_Proc rai5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc rai5 bandIdx = 1 ,DevOwnRole 0x48 rt28xx_ap_ioctl interface[rai6](index[13]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[rai6](index[13]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down [51.988][cmm] 236 - ERROR: Get map shared buffer error. [51.988][cmm] 1156 - ERROR: Failed to attach map shared memory buffer. [51.988][cmm] 14353 - ERROR: There are no APDevices saved in map shared memory. [51.988][cmm] 17243 - ERROR: Can not find Controller cfg_mode=17 cfg_mode=17 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 BuildChannelList() BandIdx = 1, PhyMode = 177, ChListNum = 9: DfsBuildChannelList(): Done Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=8, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=9, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=10, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=13, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=15, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 hc_radio_res_request(): wdev=8, hobj is not ready! hc_radio_res_request(): wdev=9, hobj is not ready! hc_radio_res_request(): wdev=10, hobj is not ready! hc_radio_res_request(): wdev=13, hobj is not ready! hc_radio_res_request(): wdev=15, hobj is not ready! set_vow_airtime_fairness_en: set 0. set_vow_dwrr_max_wait_time: set 1. SetPercentageCtrl: ucBandIdx = 1 SetPercentageCtrl: TxPowerPercentEn = 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 SetPowerDropCtrl: ucPowerDrop = 100 sync for : ra0 sync for : ra4 sync for : ra5 sync for : rai0 sync for : rai4 sync for : rai5 Set_FragThreshold_Proc::set wdev7 FragThreshold=2346) Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 device rai5 entered promiscuous mode br0: port 9(rai5) entered forwarding state br0: port 9(rai5) entered forwarding state device rai4 entered promiscuous mode br0: port 10(rai4) entered forwarding state br0: port 10(rai4) entered forwarding state can't add rai3 to bridge br0: Invalid argument can't add rai2 to bridge br0: Invalid argument can't add rai1 to bridge br0: Invalid argument device rai0 entered promiscuous mode br0: port 11(rai0) entered forwarding state br0: port 11(rai0) entered forwarding state device apclii0 entered promiscuous mode [PMF]APPMFInit:: apidx=7, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 7 ExtEventBeaconLostHandler::FW EVENT (d8:44:89:bd:cf:da), Reason 0x10 AP Beacon OFF!!! wifi_sys_linkdown:wdev(type=1,func_idx=7,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_down: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wmm_ctrl_release_entry(): Can't find HdevObj or Edca not required wifi_sys_close, wdev idx = 7 hw_ctrl_flow_v2_close: wdev_idx=7 wifi_sys_open(), wdev idx = 7 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=7 wifi_sys_linkup, wdev idx = 7 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:284 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[7]=7 wifi_sys_linkup:wdev(type=7,func_idx=1,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_up: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [PMF]APPMFInit:: apidx=11, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 11 wifi_sys_linkdown:wdev(type=1,func_idx=11,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_down: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 11 hw_ctrl_flow_v2_close: wdev_idx=11 wifi_sys_open(), wdev idx = 11 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=11 wifi_sys_linkup, wdev idx = 11 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:283 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[11]=11 wifi_sys_linkup:wdev(type=11,func_idx=1,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_up: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [PMF]APPMFInit:: apidx=12, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 12 wifi_sys_linkdown:wdev(type=1,func_idx=12,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_down: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 12 hw_ctrl_flow_v2_close: wdev_idx=12 wifi_sys_open(), wdev idx = 12 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=44, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=12 wifi_sys_linkup, wdev idx = 12 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:282 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[12]=12 wifi_sys_linkup:wdev(type=12,func_idx=1,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_up: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [53.480][cmm] 9189 - ERROR: wlNetlinkTool is already there. rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down sh: can't open '/etc/smp.sh' SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 0, duty: 100 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 0 MtCmdThermalProtectDutyCfg: duty: 100 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 1, duty: 80 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 1 MtCmdThermalProtectDutyCfg: duty: 80 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 2, duty: 60 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 2 MtCmdThermalProtectDutyCfg: duty: 60 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 3, duty: 20 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 3 MtCmdThermalProtectDutyCfg: duty: 20 SetThermalProtectEnable(): band_idx: 1, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 5 MtCmdThermalProtectEnable: band_idx: 1, protect_type: 1 MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 120 MtCmdThermalProtectEnable: restore_temp: 114, recheck_time: 5 [53.655][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra1/brport/bridge/ifindex [53.656][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai1/brport/bridge/ifindex [53.658][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra2/brport/bridge/ifindex [53.660][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra3/brport/bridge/ifindex [53.662][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai2/brport/bridge/ifindex [53.664][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai3/brport/bridge/ifindex rm: can't remove '/var/tmp/os_print/tpApp/2_debug': No such file or directory [53.877][cmm] 794: Skip create dropbear RSA key here [53.877][cmm] 822: Skip create dropbear DSS key here [2164] Mar 19 00:00:53 Running in background [Mar 19 00:00:53] radvd: poll error: Interrupted system call [Mar 19 00:00:53] radvd: poll error: Interrupted system call ip6tables: No chain/target/match by that name. iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky insmod: can't insert '/lib/modules/kmdir/kernel/drivers/net/ppp/ppp_mppe.ko': No such file or directory ioctl set error: Inappropriate ioctl for device [54.766][cmm] 586 - ERROR: Gpon sn str:54504C478Password: 9BDCFD8 [54.767][cmvendor: 0x54504c47 m] 587 - ERROR: Gpon pwd str: [54.767][cmm] 588 - ERROR: Gpon sn type:1 [54.767][cmm] 589 - ERROR: Gpon pwd type:0 api_set_sn_auth_info(564): passwd:(); api_set_sn_auth_info(637): snIUint32[0] = 0x54504c47, snIUint32[1] = 0x89bdcfd8, [2024-3-19 Tue 00:00:54.296063][TP_omciMibReset][6430]:set OMCI machine in TP_omciMibReset api_renegotiate(780):api_renegotiate after MIB reset api_set_ctc_auth_info(649): -- not implemented, to do here! -- [54.869][cmm] 1177 - ERROR: Init loid tplink passwd tplink [54.897][cmm] 133 - ERROR: Cann't open file: /var/run/zebra.pid. [54.930][cmm] 133 - ERROR: Cann't open file: /var/run/ripd.pid. [54.930][cmm] 133 - ERROR: Cann't open file: /var/run/ripngd.pid. iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading k_domain: tplinkmodem.net ip6tables: Too many links. [55.185][httpd] 1057 - ERROR: u_domain: tplinkmodem.net iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). [ rsl_initIqosObj ] 1248: 0#0,0,0,0 [56.126][cmm] 5449 - ERROR: Device.X_TP_Services.X_TP_VoiceService.{i}.PhyInterface.{i}. exit. skip create instance. writing RSA key killall: minidlnad: no process killed killall: vsftpd: no process killed [59.050][cmm] 1034 - ERROR: Can not find the sftp config file: /var/tmp/dconf/sftpcfg iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). [59.153][cmm] 1034 - ERROR: Can not find the sftp config file: /var/tmp/dconf/sftpcfg [2708] Mar 19 00:00:58 Failed listening on '22': Error listening: Address already in use Dropbear init failed, cos will restart it. [2024/03/19 00:00:58] getifaddr.c:334: runtime_vars.ifaces[0]=br0 [2708] Mar 19 00:00:58 Early exit: No listening ports available. [59.333][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.333][cmm] 1653 - ERROR: ret=9007 [59.333][cmm] 707 - ERROR: ret=9007 [59.334][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.335][cmm] 1653 - ERROR: ret=9007 [59.335][cmm] 707 - ERROR: ret=9007 [59.336][httpd] 529 - ERROR: Unknown page: /main/advanceLte.htm, skip it [59.336][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.337][cmm] 1653 - ERROR: ret=9007 [59.337][httpd] 529 - ERROR: Unknown page: /main/sfpWan.htm, skip it [59.337][cmm] 707 - ERROR: ret=9007 [59.337][httpd] 529 - ERROR: Unknown page: /main/sfpWanEdit.htm, skip it +Set_MapTS_Proc MAP TS is already disabled +++++++++we are going to init cloud+++++++++++++++++ [59.390][cmm] 4364 - ERROR: mesh enable is 1, ts enable is 0 [59.391Set_MapTS_Proc MAP TS is already disabled ][cmm] 3710 - ERROR: traffic separation is disabled mmmInit():Total mem size=51364, addr=0x0x8e6008. ************************************************************* *************************MMM TABLE DUMP***************Set_Map_Bh_Primary_Vid_Proc: ra5 default vid=4095 ******* ------------------------------------------------------------- port28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! olhead(40) poolnum dynamictimes chainhead poolend -----------------------------Set_Map_Fh_Vid_Proc: ra0 fh vid=4095 -------------------------------- 0x8e6008 8 0 (nSet_Map_Bh_Primary_Vid_Proc: rai5 default vid=4095 il) 0x8f28ac ------------------------------------------------------rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! ------- index poolhead(20) size blocks free usage -----------Set_Map_Fh_Vid_Proc: rai0 fh vid=4095 -------------------------------------------------- 1 0x8e6030 32 256 256 0 2 0x8e8448 64 128 128 0 3 0x8ea66StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag ra0 0 128 64 64 0 4 0x8ec778 256rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! 32 32 0 5 0x8ee810 512 8 8 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag ra0 0 6 0x8ef848 1024 4 4 0 7 0x8f08rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! 70 2048 2 2 0 8 0x8f1890 4096 1 1 0 ------------------------------------------------------------- index chainnode(16) magic length prev next ------------------------------------------------------------- (nil) ************************************************************* 1710817258885|2728|4|cloud.c:91:main| - cloud-sdk version: 1.3.9-rc03, build_time:20211227_172322 Interface doesn't accept private ioctl... set (8BE2): Network is down Interface doesn't accept private ioctl... set (8BE2): Network is down Interface doesn't accept private ioctl... set (8BE2): Invalid argument Interface doesn't accept private ioctl... set (8BE2): Network is down ************************************************** ********************config dump******************* -------------------------------------------------- sef domain : n-deventry-gw.tplinkcloud.com sef port : 443 cloud svr default port : 443 default svr : n-devs-gw.tplinkcloud.com default port : 443 default valid time : 17voip modules loaded, timer number 32800 heartbeat interval : 235000 request timeout : 5000 reconnect timewait max : 1024000 reconnect cachedsvr max times : 5 reconnect defaultsvr max times : 5 reconnect random time min : 2000 reconnect random time max : 256000 short connect interval : 259200000 max message number : 1000 max client number : 20 service file : /tmp/cloud_service.cfg cer file : /etc/cloud/2048_newroot.cer ssl verify CN : ssl verify time : 0 ************************************************** Interface doesn't accept private ioctl... set (8BE2): Invalid argument Interface doesn't accept private ioctl... set (8BE2): Network is down [59.635][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lag fxsGetLine(0)Ret[1]=State[3] erfxsSetLine[0]state 0x9 State UNKNOWN ! than 32. [59.635][cmm] 1653 - ERROR: ret=9007 [59.635][cmm] 707 - ERROR: ret=9007 [59.636][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.637][cmm] 1653 - ERROR: ret=9007 [59.637][cmm] 707 - ERROR: ret=9007 [59.638][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.638][cmm] 1653 - ERROR: ret=9007 [59.639][cmm] 707 - ERROR: ret=9007 [59.640][httpd] 659 - ERROR: Invalid value! [59.641][httpd] 529 - ERRORr0: port 1(eth0.1) entered disabled state m: Unknown page: /main/operateMode.htm, skip it [59.644][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.644][cmm] 1653 - ERROR: ret=9007 [59.645][cmm] 707 - ERROR: ret=9007 [59.645][cmm] 1807 - evice eth0.1 left promiscuous mode ;3br0: port 1(eth0.1) entered disabled state 1mERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.646][cmm] 1653 - ERROR: ret=9007 [59.646][cmm] 707 - ERROR: ret=9007 [59.776][cmm] 1387 - ERROR: --> X_TP_ConnType=LAN X_TP_ServiceType=Unknown [59.777][cmm] 1387 - ERROR: --> X_TP_ConnType=PPP3G X_TP_ServiceType=Unknown [59.777][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP4br0: port 2(eth0.2) entered disabled state G X_TP_ServiceType=Unknown [59.777][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP X_TP_ServiceType=Internet sh: can't create /proc/tplink/eth_fdevice eth0.2 left promiscuous mode obr0: port 2(eth0.2) entered disabled state rward: nonexistent directory *reg=00002104 value:00ff0000 VDSP_GetInstance:292 [GDI] Change log level to (EVA_LOG_ERR). *reg=00002204 value:00ff0000 *reg=00002304 value:00ff0000 *reg=00002404 value:00ff0000 ludewei get the ipv6 addr=:: ludewei get the ipv6 addr=:: i +++ timer 2 start (tick : 2) +++ pv6 Via:0br0: port 3(eth0.3) entered disabled state zeroIp:1 zeroIp6:1 ipaddr:0.0.0.0 ip6addr::: [59.908][cutil] 2146 - ERROR: Error ip is 0.0.0.0,:: Sorry, rule does not exist. Sdevice eth0.3 left promiscuous mode orbr0: port 3(eth0.3) entered disabled state ry, rule does not exist. Sorry, rule does not exist. br0: port 4(eth0.4) entered disabled state fxsSetLine[0]state 0x9 State UNKNOWN ! Sorry, rule does not exist. device eth0.4 left promiscuous mode br0: port 4(eth0.4) entered disabled state Sorry, rule does not exist. Illegal target name 'ieee1905'. device eth0 entered promiscuous mode Ilbr0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state legal target name 'ieee1905'. sh: write error: Invalid argument device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state device eth0.3 entered promiscuous mode ath_band_steering_netlink_receive 157 pid = 2914 ath_band_steering_netlink_receive 157 pid = 2914 device eth0.4 entered promiscuous mode ath_band_steering_netlink_receive 157 pid = 2914 devicath_band_steering_netlink_receive 157 pid = 2914 e eth0.5 is not a slave of br0 g_tx_ctl = 1 [60.502][SharedLib] 123: Map shm size: 291864 bytes [60.503][SharedLib] 123: Map shm size: 291864 bytes [60.504][SharedLib] 85: mac(DA:44:89:BD:CF:D9), cfg_file(/var/tmp/map.conf), is_registrar(1), bMapController(1), mapEnable(1), vlan_enable(0) procName is sigma_dut, keyWord is [60.504][SharedLib] 85: mac(DA:44:89:BD:CF:D8), cfg_file(/var/tmp/map.conf), is_registrar(0), bMapController(0), mapEnable(1), vlan_enable(0) procName is sigma_dut, keyWord is sh: write error: Invalid argument [60.706][cmm] 1161 - ERROR: num of mapDevices is zero in memory buffer. [60.706][cmm] 1267 - ERROR: There are no APDevices saved in map shared memory. updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 [60.875][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) LoadClientCert: Not using a device certificate for connections topic[/tpuc/tr369controller], response_topic[/tpuc/D84489-Device2-22445J1001433] agentid is :USP::D84489BDCFD8 DM_EXEC_Main start MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) Starting daemon... sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No [2024-3-19 Tue 00:01:00.617223]OMCI wait for RSL init done such fi [2024-3-19 Tue 00:01:00.623417][main][1165]:Enter OMCI State Machine, OMCI_STATE_START! le or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) [2024-3-19 Tue 00:01:00.674879][omciAddVendorMeToStdMeTable][1199] before DM operation ,totalSize(4) [ omciAddVendorMeToS [2024-3-19 Tue 00:01:00.686203][omciAddVendorMeToStdMeTable][1250] toalTblSize(4) a/b (0) tdMeTable ] [2024-3-19 Tue 00:01:00.695427] initFilterMeInfo toalTblSize = 3 1216: 1#1 [2024-3-19 Tue 00:01:00.702214] enter omciMeInitForCWMPConfigData [ o [2024-3-19 Tue 00:01:00.709211] enter omciMeInitForExtendOntG mciAd [2024-3-19 Tue 00:01:00.715802] enter omciMeInitForExtendOnt2Abi dVendo [2024-3-19 Tue 00:01:00.722725] enter omciMeInitForONTImageMode rMeT [2024-3-19 Tue 00:01:00.729431] enter omciMeInitForExtendOnt3Abi oStdM [2024-3-19 Tue 00:01:00.736281] enter omciMeInitForHuaweiProprietary eTable [2024-3-19 Tue 00:01:00.743597] enter omciMeInitForOntOpticalDat ] 122 [2024-3-19 Tue 00:01:00.750516] enter omciMeInitForHwExtendedWan 0: [2024-3-19 Tue 00:01:00.757309] enter omciMeInitForStandard92Me 2#1,1 [2024-3-19 Tue 00:01:00.764070] enter omciMeInitForExtend80211Mn [ om [2024-3-19 Tue 00:01:00.771006] enter omciMeInitForVoipSoftwareI ciAd [2024-3-19 Tue 00:01:00.777757] enter omciMeInitForExtOntProduct dVendorMe [2024-3-19 Tue 00:01:00.784984][main][1183]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE! ToStdMeTab [2024-3-19 Tue 00:01:00.796125][omciInitCapability][539] omciInitCapability In le ] 12 [2024-3-19 Tue 00:01:00.804035]pPortList(48,248,47,47,47,47,32) device lo entered promiscuous mode 16: [2024-3-19 Tue 00:01:00.813499]pPort(48) 1#2 [2024-3-19 Tue 00:01:00.817743]pPort(248) [ om [2024-3-19 Tue 00:01:00.822144]pPort(47) ci [2024-3-19 Tue 00:01:00.826291]pPort(47) AddVend [2024-3-19 Tue 00:01:00.830714]pPort(47) orM [2024-3-19 Tue 00:01:00.834890]pPort(47) eToS [2024-3-19 Tue 00:01:00.839175]pPort(32) tdMeTabl [2024-3-19 Tue 00:01:00.843802][omciInitCapability][640] getNext Dev2 currGponAuthObj SN(54504C4789BDCFD8),SNtype(1) e ] 1220: [2024-3-19 Tue 00:01:00.855160][omciInitCapability][687] currOmciCapObj.vendorId IS (TPLG) 2#2,1 [2024-3-19 Tue 00:01:00.864093]read_flash:read In - 8 bytes in 66977792 [ omciAddVen [2024-3-19 Tue 00:01:00.871906]read_flash:read In - 8 bytes in 66977792 dorMeToStdMeTable ] 1216: 1#3 [ omciAddVendorMeToStdMeTable ] 1220: 2#3,1 [ omciAddVendorMeToStdMeTable ] 1216: 1#4 [ omciAddVendorMeToStdMeTable ] 1220: 2#4,1 sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) r [2024-3-19 Tue 00:01:00.902093]read_flash:read In - 512 bytes in 1703936 et(-1) se [2024-3-19 Tue 00:01:00.909730]read_flash:read In - 512 bytes in 33554432 ndto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2 [2024-3-19 Tue 00:01:00.938145]do not config omci intance by file info ) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory [2024-3-19 Tue 00:01:00.986166][main][1193]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT! line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No suchset olt type: 0 file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) svchost_get_event_val: get paponTime:Connection Start working_mode: 10 ram fail [0] [61.495][mapAgent] 383: Starting map (AL MAC = da:44:89:bd:cf:d8), mapEnable = 1... sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) ctro [2024-3-19 Tue 00:01:01.51631][main][1221]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN! mfile.cfg sendto: No such file or directory line(593) Msg.type(9250) pid(859) errno(2) ret(-1) ********************config dump******************* ----------------------status---------------------- processid : 2732 ---------------------configure-------------------- loglevel : 3 verify host : n-device-api.tplinkcloud.com verify port : 0 verify path : /v1/validate post connect timeout : 20 post transfer timeout : 20 get connect timeout : 20 get transfer timeout : 20 session debug : off cer file : /etc/cloud_https/2048new.cer cer type : ************************************************** sh: /bin/mv: not found [61.582][mapController] 387: Starting map (AL MAC = da:44:89:bd:cf:d9), mapEnable = 1... [61.583][mapController] 9783: send stand renew to in band[0] [61.584][mapController] 9783: send stand renew to in band[1] gpon flow open ioctl file fail [61.600][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! Couldn't open image file: /tmp/tc_store_romfile.conf! [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [61.633][TP1905] 4875: Agent on controller [61.634][TP1905] 4875: Agent on controller Unlocking reservearea ... Could not open mtd device: reservearea Couldn't open image file: /tmp/tc_store_romfile.conf! [61.736][mapAgent] 4148: handleApAutoconfigurationResponse ####### selfDev profile:2, sendDev profile:2 [61.817][mapAgent] 4148: handleApAutoconfigurationResponse ####### selfDev profile:2, sendDev profile:2 allocate buffer for epon_stat_prev. pon_mode = 0 [62.170][cos] 793 - ERROR: PON linkStatus changed :INIT->0 [62.170][cos] 872 - ERROR: PON linkStatus is not Stable (0) sh: write error: Invalid argument [62.523][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! [62.766][Topology] 3644 - ERROR: overrun timeStamp(0) [63.200][cos] 606 - ERROR: Dropbear error key, or can't listen to 22 port, will restart dropbear. [3205] Mar 19 00:01:02 Running in background [63.228][cos] 793 - ERROR: PON linkStatus changed :INIT->0 [63.228][cos] 797 - ERROR: PON linkStatus isStable (1) [63.235][cmm] 238 - ERROR: exit [63.235][cmm] 455 - ERROR: exit [64.978][cos] 1217: ===============================recv AgentConfig Message======================================== [64.979][cos] 1227: do not support autoconfig in Controller or easymesh disable [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [69.850][ntpc] 789 - ERROR: open DNS error NTP server list: [Mar 19 00:01:09] radvd: poll error: Interrupted system call [Mar 19 00:01:09] radvd: poll error: Interrupted system call MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [71.412][cos] 2212 - WARN: may have to get HW speed from driver/chip [81.622][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [91.853][cos] 2212 - WARN: may have to get HW speed from driver/chip [102.062][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [112.272][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [122.581][cos] 1480: auto FW upgrade start [122.582][cos] 930: auto FW upgrade role check [122.582][cos] 958: auto FW upgrade enable check [122.582][cos] 1537: auto upgrade not enable, skip it [122.582][cos] 1524: force FW upgrade start [122.583][cos] 911: force FW upgrade role check [122.583][cos] 939: force FW upgrade enable check [122.583][cos] 974: force FW upgrade period check [122.584][cos] 1035: thresh range 40 [122.584][cos] 1042: delay init [0/18] [122.584][cos] 1046: force hour 3 current 0 [122.584][cos] 1599: not update at this period, skip it [122.589][cos] 2212 - WARN: may have to get HW speed from driver/chip [132.812][cos] 2212 - WARN: may have to get HW speed from driver/chip [143.022][cos] 2212 - WARN: may have to get HW speed from driver/chip [153.239][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [163.452][cos] 2212 - WARN: may have to get HW speed from driver/chip [173.662][cos] 2212 - WARN: may have to get HW speed from driver/chip [183.985][cos] 1480: auto FW upgrade start [183.985][cos] 930: auto FW upgrade role check [183.986][cos] 958: auto FW upgrade enable check [183.986][cos] 1537: auto upgrade not enable, skip it [183.986][cos] 1524: force FW upgrade start [183.986][cos] 911: force FW upgrade role check [183.987][cos] 939: force FW upgrade enable check [183.987][cos] 974: force FW upgrade period check [183.987][cos] 1046: force hour 3 current 0 [183.988][cos] 1599: not update at this period, skip it [183.992][cos] 2212 - WARN: may have to get HW speed from driver/chip [194.222][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [204.432][cos] 2212 - WARN: may have to get HW speed from driver/chip [214.649][cos] 2212 - WARN: may have to get HW speed from driver/chip [224.862][cos] 2212 - WARN: may have to get HW speed from driver/chip [235.072][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [245.373][cos] 1480: auto FW upgrade start [245.373][cos] 930: auto FW upgrade role check [245.374][cos] 958: auto FW upgrade enable check [245.374][cos] 1537: auto upgrade not enable, skip it [245.374][cos] 1524: force FW upgrade start [245.375][cos] 911: force FW upgrade role check [245.375][cos] 939: force FW upgrade enable check [245.375][cos] 974: force FW upgrade period check [245.375][cos] 1046: force hour 3 current 0 [245.376][cos] 1599: not update at this period, skip it [245.380][cos] 2212 - WARN: may have to get HW speed from driver/chip [255.613][cos] 2212 - WARN: may have to get HW speed from driver/chip [265.822][cos] 2212 - WARN: may have to get HW speed from driver/chip [276.038][cos] 2212 - WARN: may have to get HW speed from driver/chip [286.252][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [296.462][cos] 2212 - WARN: may have to get HW speed from driver/chip [306.763][cos] 1480: auto FW upgrade start [306.763][cos] 930: auto FW upgrade role check [306.764][cos] 958: auto FW upgrade enable check [306.764][cos] 1537: auto upgrade not enable, skip it [306.764][cos] 1524: force FW upgrade start [306.764][cos] 911: force FW upgrade role check [306.765][cos] 939: force FW upgrade enable check [306.765][cos] 974: force FW upgrade period check [306.765][cos] 1046: force hour 3 current 0 [306.765][cos] 1599: not update at this period, skip it [306.770][cos] 2212 - WARN: may have to get HW speed from driver/chip [317.002][cos] 2212 - WARN: may have to get HW speed from driver/chip [327.212][cos] 2212 - WARN: may have to get HW speed from driver/chip [337.431][cos] 2212 - WARN: may have to get HW speed from driver/chip [347.642][cos] 2212 - WARN: may have to get HW speed from driver/chip [357.852][cos] 2212 - WARN: may have to get HW speed from driver/chip Phy_DectectPkt_Check line:1979 Check_Time_2G/5G:7/0 > Max_Check_Time:6 Phy_DectectPkt_Check line:1980 phy reset ok,times =1 [368.181][cos] 1480: auto FW upgrade start [368.181][cos] 930: auto FW upgrade role check [368.181][cos] 958: auto FW upgrade enable check [368.182][cos] 1537: auto upgrade not enable, skip it [368.182][cos] 1524: force FW upgrade start [368.182][cos] 911: force FW upgrade role check [368.182][cos] 939: force FW upgrade enable check [368.182][cos] 974: force FW upgrade period check [368.183][cos] 1046: force hour 3 current 0 [368.183][cos] 1599: not update at this period, skip it [368.187][cos] 2212 - WARN: may have to get HW speed from driver/chip [378.422][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [388.632][cos] 2212 - WARN: may have to get HW speed from driver/chip [398.849][cos] 2212 - WARN: may have to get HW speed from driver/chip [409.062][cos] 2212 - WARN: may have to get HW speed from driver/chip [419.272][cos] 2212 - WARN: may have to get HW speed from driver/chip [429.581][cos] 1480: auto FW upgrade start [429.581][cos] 930: auto FW upgrade role check [429.581][cos] 958: auto FW upgrade enable check [429.582][cos] 1537: auto upgrade not enable, skip it [429.582][cos] 1524: force FW upgrade start [429.582][cos] 911: force FW upgrade role check [429.582][cos] 939: force FW upgrade enable check [429.583][cos] 974: force FW upgrade period check [429.583][cos] 1046: force hour 3 current 0 [429.583][cos] 1599: not update at this period, skip it [429.587][cos] 2212 - WARN: may have to get HW speed from driver/chip [439.822][cos] 2212 - WARN: may have to get HW speed from driver/chip [450.032][cos] 2212 - WARN: may have to get HW speed from driver/chip [460.249][cos] 2212 - WARN: may have to get HW speed from driver/chip [470.462][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [480.672][cos] 2212 - WARN: may have to get HW speed from driver/chip [490.993][cos] 1480: auto FW upgrade start [490.993][cos] 930: auto FW upgrade role check [490.993][cos] 958: auto FW upgrade enable check [490.994][cos] 1537: auto upgrade not enable, skip it [490.994][cos] 1524: force FW upgrade start [490.994][cos] 911: force FW upgrade role check [490.994][cos] 939: force FW upgrade enable check [490.995][cos] 974: force FW upgrade period check [490.995][cos] 1046: force hour 3 current 0 [490.995][cos] 1599: not update at this period, skip it [491.000][cos] 2212 - WARN: may have to get HW speed from driver/chip [501.232][cos] 2212 - WARN: may have to get HW speed from driver/chip [511.442][cos] 2212 - WARN: may have to get HW speed from driver/chip [521.658][cos] 2212 - WARN: may have to get HW speed from driver/chip [531.872][cos] 2212 - WARN: may have to get HW speed from driver/chip [542.082][cos] 2212 - WARN: may have to get HW speed from driver/chip MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [552.383][cos] 1480: auto FW upgrade start [552.383][cos] 930: auto FW upgrade role check [552.383][cos] 958: auto FW upgrade enable check [552.384][cos] 1537: auto upgrade not enable, skip it [552.384][cos] 1524: force FW upgrade start [552.384][cos] 911: force FW upgrade role check [552.384][cos] 939: force FW upgrade enable check [552.385][cos] 974: force FW upgrade period check [552.385][cos] 1046: force hour 3 current 0 [552.385][cos] 1599: not update at this period, skip it [552.389][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [562.622][cos] 2212 - WARN: may have to get HW speed from driver/chip [572.832][cos] 2212 - WARN: may have to get HW speed from driver/chip [583.050][cos] 2212 - WARN: may have to get HW speed from driver/chip [593.262][cos] 2212 - WARN: may have to get HW speed from driver/chip [603.472][cos] 2212 - WARN: may have to get HW speed from driver/chip [613.783][cos] 1480: auto FW upgrade start [613.784][cos] 930: auto FW upgrade role check [613.784][cos] 958: auto FW upgrade enable check [613.784][cos] 1537: auto upgrade not enable, skip it [613.784][cos] 1524: force FW upgrade start [613.785][cos] 911: force FW upgrade role check [613.785][cos] 939: force FW upgrade enable check [613.785][cos] 974: force FW upgrade period check [613.785][cos] 1046: force hour 3 current 0 [613.786][cos] 1599: not update at this period, skip it [613.790][cos] 2212 - WARN: may have to get HW speed from driver/chip [624.022][cos] 2212 - WARN: may have to get HW speed from driver/chip [634.232][cos] 2212 - WARN: may have to get HW speed from driver/chip [644.449][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [654.662][cos] 2212 - WARN: may have to get HW speed from driver/chip [664.872][cos] 2212 - WARN: may have to get HW speed from driver/chip [675.202][cos] 1480: auto FW upgrade start [675.202][cos] 930: auto FW upgrade role check [675.202][cos] 958: auto FW upgrade enable check [675.203][cos] 1537: auto upgrade not enable, skip it [675.203][cos] 1524: force FW upgrade start [675.203][cos] 911: force FW upgrade role check [675.204][cos] 939: force FW upgrade enable check [675.204][cos] 974: force FW upgrade period check [675.204][cos] 1046: force hour 3 current 0 [675.204][cos] 1599: not update at this period, skip it [675.209][cos] 2212 - WARN: may have to get HW speed from driver/chip [685.442][cos] 2212 - WARN: may have to get HW speed from driver/chip [695.652][cos] 2212 - WARN: may have to get HW speed from driver/chip [705.869][cos] 2212 - WARN: may have to get HW speed from driver/chip [716.082][cos] 2212 - WARN: may have to get HW speed from driver/chip [726.292][cos] 2212 - WARN: may have to get HW speed from driver/chip [736.603][cos] 1480: auto FW upgrade start [736.603][cos] 930: auto FW upgrade role check [736.604][cos] 958: auto FW upgrade enable check [736.604][cos] 1537: auto upgrade not enable, skip it [736.604][cos] 1524: force FW upgrade start [736.604][cos] 911: force FW upgrade role check [736.605][cos] 939: force FW upgrade enable check [736.605][cos] 974: force FW upgrade period check [736.605][cos] 1046: force hour 3 current 0 [736.605][cos] 1599: not update at this period, skip it [736.610][cos] 2212 - WARN: may have to get HW speed from driver/chip [740.704][cos] 793 - ERROR: PON linkStatus changed :0->2 [740.704][cos] 872 - ERROR: PON linkStatus is not Stable (0) [741.721][cos] 793 - ERROR: PON linkStatus changed :0->3 [741.722][cos] 797 - ERROR: PON linkStatus isStable (1) [741.732][cmm] 238 - ERROR: exit [741.733][cmm] 455 - ERROR: exit sleep 90s! ponTime:O5 VoIPBasic_Common SIPProtocol is SIP prevSipStatus: 0, curSipStatus: 0 voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0 gpon flow open ioctl[xgponmgr_lib_ioctl][126]:===Fail Exit===ioctl error! file fail [xgponmgr_lib_ioctl][126]:===Fail Exit===ioctl error! [744.804][cos] 793 - ERROR: PON linkStatus changed :3->5 [744.804][cos] 872 - ERROR: PON linkStatus is not Stable (0) [745.822][cos] 793 - ERROR: PON linkStatus changed :3->5 [745.822][cos] 797 - ERROR: PON linkStatus isStable (1) [745.829][cmm] 238 - ERROR: exit [745.830][cmm] 455 - ERROR: exit set_virtualdev_ifname_in_arrray,1360,wan[0]:virtualdev_name=nas1_0 dev_name=pon NETDEV_UP: wan_itf_info[0].valid=1, wan_itf_info[0].wan_dev=nas1_0 NETDEV_UP: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_UP: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_UP: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_UP: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_UP: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_UP: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_UP: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_UP: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_UP: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_UP: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_UP: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_UP: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_UP: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_UP: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_UP: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL NETDEV_DOWN: wan_itf_info[0].valid=0, wan_itf_info[0].wan_dev=NULL NETDEV_DOWN: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_DOWN: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_DOWN: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_DOWN: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_DOWN: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_DOWN: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_DOWN: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_DOWN: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_DOWN: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_DOWN: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_DOWN: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_DOWN: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_DOWN: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_DOWN: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_DOWN: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL device pon entered promiscuous mode NETDEV_UP: wan_itf_info[0].valid=1, wan_itf_info[0].wan_dev=nas1_0 NETDEV_UP: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_UP: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_UP: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_UP: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_UP: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_UP: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_UP: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_UP: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_UP: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_UP: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_UP: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_UP: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_UP: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_UP: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_UP: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. [746.298][cmm] 158 - WARN: Empty DNSServer() gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! gpon flow open ioctl file fail [747.387][cos] 2212 - WARN: may have to get HW speed from driver/chip ponTime:Traffic Up [clearTxRxPowerAlarm][1634]clear power alarmNum(1) first, then report the alarm [omci_pm_alarm_tx_rx_power][1749]rx power alarm happened, rxPower:0.223000, rxPowerLowerTh:-28.000000, rxPowerUpperTh:-8.000000 [750.941][cos] 1315 - WARN: Find main pool dhcp obj [750.942][cos] 1236: found valid lan ip: 192.168.0.1, mask: 255.255.255.0 [750.942][cos] 1420 - ERROR: Set LAN_IP_INTF with ip 192.168.0.1, mask 255.255.255.0, dns:192.168.0.1,0.0.0.0 [750.946][cmm] 2694 - ERROR: [ PID=859 ] write usrconf to nor flash (note: please resure your flash-write necessary) iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 RTNETLINK answers: Invalid argument [751.173][cmm] 2694 - ERROR: [ PID=859 ] write usrconf to nor flash (note: please resure your flash-write necessary) iptables: Bad rule (does a matching rule exist in that chain?). iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 iptables: No chain/t arget/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 [751.388][cmm] 2694 - ERROR: [ PID=859 ] write usrconf to nor flash (note: please resure your flash-write necessary) Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 [751.584][cos] 1439 - ERROR: ACT_REBOOT Now... sh: watchdog: not found ra0: ===> main_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(0) UpdateBeaconHandler, wdev(0) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 0 wifi_sys_linkdown:wdev(type=1,func_idx=0,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_down: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 0 hw_ctrl_flow_v2_close: wdev_idx=0 RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT br0: port 7(ra0) entered disabled state ra4: ===> mbss_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(4) UpdateBeaconHandler, wdev(4) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 4 wifi_sys_linkdown:wdev(type=1,func_idx=4,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_down: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 4 hw_ctrl_flow_v2_close: wdev_idx=4 RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT br0: port 6(ra4) entered disabled state ra5: ===> mbss_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(5) UpdateBeaconHandler, wdev(5) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 5 wifi_sys_linkdown:wdev(type=1,func_idx=5,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_down: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 5 hw_ctrl_flow_v2_close: wdev_idx=5 RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT br0: port 5(ra5) entered disabled state rai0: ===> mbss_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(7) UpdateBeaconHandler, wdev(7) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 7 wifi_sys_linkdown:wdev(type=1,func_idx=7,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_down: wdev_idx=7 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 7 hw_ctrl_flow_v2_close: wdev_idx=7 RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT br0: port 11(rai0) entered disabled state rai4: ===> mbss_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(11) UpdateBeaconHandler, wdev(11) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 11 wifi_sys_linkdown:wdev(type=1,func_idx=11,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_down: wdev_idx=11 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 11 hw_ctrl_flow_v2_close: wdev_idx=11 RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT br0: port 10(rai4) entered disabled state rt28xx_ap_ioctl interface[ra0](index[0]) is down, cmd [8be1] return!!! [752.rt28xx_ap_ioctl interface[ra4](index[4]) is down, cmd [8be1] return!!! 172][Platform] 2732 - ERROR: Get STA list [752.172][Topology] 299 - ERROR: get asso sta list [752.179][Platform] 2732 - ERROR: Get STA list [752.179][Topology] 299 - ERROR: get asso sta list rai5: ===> mbss_virtual_if_close RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DOWN ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(12) UpdateBeaconHandler, wdev(12) bss not ready (state:2, caller:ap_link_down+0x78/0xe8)!! wifi_sys_linkdown(), wdev idx = 12 wifi_sys_linkdown:wdev(type=1,func_idx=12,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_down: wdev_idx=12 (bssUpdateChannel), ucPrimCh=44, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 12 hw_ctrl_flow_v2_close: wdev_idx=12 RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_DEINIT APStop(caller:APShutdown+0x48/0xa4), oper(0) bssid(0)=d8:44:89:bd:cf:d8 ===> APStopByBss() mbss_idx 0 UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! MacTableDeleteEntry(caller:MacTableResetWdev+0xc8/0x28c): wcid 0 ===== wifi_sys_disconn_act: Not enqueue!! entry->EntryState=0 ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(0) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(0) wifi_sys_close, wdev idx = 0 wifi_sys_close: Not enqueue!! wpf_op=0 ap_ftkd> Release FT KDP Module... ===> APStopByBss() mbss_idx 1 UpdateBeaconHandler, wdev(1) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(1) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(1) wifi_sys_close, wdev idx = 1 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 2 UpdateBeaconHandler, wdev(2) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(2) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(2) wifi_sys_close, wdev idx = 2 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 3 UpdateBeaconHandler, wdev(3) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(3) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(3) wifi_sys_close, wdev idx = 3 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 4 UpdateBeaconHandler, wdev(4) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(4) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(4) wifi_sys_close, wdev idx = 4 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 5 UpdateBeaconHandler, wdev(5) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(5) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(5) wifi_sys_close, wdev idx = 5 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 6 UpdateBeaconHandler, wdev(6) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(6) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(6) wifi_sys_close, wdev idx = 6 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 7 UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(7) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(7) wifi_sys_close, wdev idx = 7 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 8 UpdateBeaconHandler, wdev(8) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(8) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(8) wifi_sys_close, wdev idx = 8 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 9 UpdateBeaconHandler, wdev(9) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(9) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(9) wifi_sys_close, wdev idx = 9 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 10 UpdateBeaconHandler, wdev(10) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(10) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(10) wifi_sys_close, wdev idx = 10 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 11 UpdateBeaconHandler, wdev(11) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(11) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(11) wifi_sys_close, wdev idx = 11 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 12 UpdateBeaconHandler, wdev(12) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(12) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(12) wifi_sys_close, wdev idx = 12 wifi_sys_close: Not enqueue!! wpf_op=0 ===> APStopByBss() mbss_idx 13 UpdateBeaconHandler, wdev(13) bss not ready (state:0, caller:APStopByBss+0xf0/0x3ec)!! ap_link_down(caller:APStopByBss+0x16c/0x3ec), wdev(13) ap_link_down(caller:ap_inf_close+0x3c/0x124), wdev(13) wifi_sys_close, wdev idx = 13 wifi_sys_close: Not enqueue!! wpf_op=0 MtCmdFdFrameOffloadSet(): Enable = 0, OwnMacIdx = 255, WlanIdx = 0, Band = 0, Len = 0 ch_switch_monitor_exit:: Exit RtmpMgmtTaskExit, pAd=d3201000 MtCmdFdFrameOffloadSet(): Enable = 0, OwnMacIdx = 0, WlanIdx = 0, Band = 0, Len = 0 RT28xxPciAsicRadioOff(): Not support for HIF_MT yet! RTMPDrvClose call RT28xxPciAsicRadioOff fail !! tx_kickout_fail_count = 0 tx_timeout_fail_count = 0 rx_receive_fail_count = 0 alloc_cmd_msg = 12651 free_cmd_msg = 12650 whnat_ring_exit(): cookie=d3201000 unregister rx data done task cc601154 =====>unregister 2G hostdapt_registe_wifitask 0 =====>unregister 5G hostdapt_registe_wifitask 1 token_tx_queue_destroy(): cbff5404,cbff5404 pci_fw_own_by_port: fw own to p(0) fw_own: port=1 is not enabled RTMP_AllTimerListRelease: Size=105 RTMP_AllTimerListRelease: Cancel timer obj d353ff40! RTMP_AllTimerListRelease: Timer is allocated by UserCfgInit+0x254/0x1d70,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3972c80! RTMP_AllTimerListRelease: Timer is allocated by scan_partial_init+0x50/0x9c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d39d3458! RTMP_AllTimerListRelease: Timer is allocated by scan_partial_init+0x90/0x9c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d356b874! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d356b8ac! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3571ca4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3571cdc! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35780d4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d357810c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d357e504! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d357e53c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3584934! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d358496c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d358ad64! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d358ad9c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3591194! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35911cc! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35975c4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35975fc! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d359d9f4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d359da2c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35a3e24! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35a3e5c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35aa254! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35aa28c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b0684! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b06bc! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b6ab4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b6aec! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35bcee4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x6c/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35bcf1c! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x90/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d36388c4! RTMP_AllTimerListRelease: Timer is allocated by OceTimerInit+0x104/0x15c,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3972c40! RTMP_AllTimerListRelease: Timer is allocated by sync_fsm_init+0x254/0x2b4,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d39d3418! RTMP_AllTimerListRelease: Timer is allocated by sync_fsm_init+0x254/0x2b4,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d36914ec! RTMP_AllTimerListRelease: Timer is allocated by WscInitClientTimers+0x58/0xcc,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d37b9cb4! RTMP_AllTimerListRelease: Timer is allocated by WscInitClientTimers+0x58/0xcc,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d356b6bc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d356b6f0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3571aec! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3571b20! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3577f1c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3577f50! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d357e34c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d357e380! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d358477c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35847b0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d358abac! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d358abe0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3590fdc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3591010! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d359740c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3597440! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d359d83c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d359d870! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35a3c6c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35a3ca0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35aa09c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35aa0d0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b04cc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b0500! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b68fc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35b6930! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35bcd2c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35bcd60! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35c315c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35c3190! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35c958c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35c95c0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35cf9bc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35cf9f0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35d5dec! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35d5e20! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35dc21c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35dc250! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35e264c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35e2680! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35e8a7c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35e8ab0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35eeeac! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35eeee0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35f52dc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35f5310! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35fb70c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d35fb740! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3601b3c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3601b70! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3607f6c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3607fa0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d360e39c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d360e3d0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d36147cc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3614800! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d361abfc! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d361ac30! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d362102c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3621060! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d362745c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3627490! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d362d88c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x44/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d362d8c0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d368e29c! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x150/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d368e2d0! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x16c/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d37b6a64! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x150/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d37b6a98! RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x16c/0x210,Valid:1,Lock:d3af4654,State:0 RTMP_AllTimerListRelease: Cancel timer obj d3aeac88! RTMP_AllTimerListRelease: Timer is allocated by BBUPollingModeInit+0x30/0x44,Valid:1,Lock:d3af4654,State:1 pci_fw_own_by_port: fw own to p(0) fw_own: port=1 is not enabled <---HwCtrlThread mt_service_close: wlan service closes successfully! wifi_chip_remove(): Chang WED IRQ: 91 to CHIP IRQ: 83 wed_ser_task(): wed_ser exist, wed->irq=91! token_info_exit():whnat: free res->fbuf whnat_remove(): whnat remove done!! whnat_driver_exit(): whnat entry clear done!! br0: port 9(rai5) entered disabled state rt28xx_ap_ioctl interface[ra5](index[5]) is down, cmd [8be1] return!!! [754.4rt28xx_ap_ioctl interface[rai0](index[7]) is down, cmd [8be1] return!!! 51][Platfrt28xx_ap_ioctl interface[rai4](index[11]) is down, cmd [8be1] return!!! orm] 2732rt28xx_ap_ioctl interface[rai5](index[12]) is down, cmd [8be1] return!!! - ERROR: Get STA list [754.451][Topology] 299 - ERROR: get asso sta list [754.458][Platform] 2732 - ERROR: Get STA list [754.459][Topology] 299 - ERROR: get asso sta list [754.466][Platform] 2732 - ERROR: Get STA list [754.466][Topology] 299 - ERROR: get asso sta list [754.473][Platform] 2732 - ERROR: Get STA list [754.473][Topology] 299 - ERROR: get asso sta list killall: dibbler-client: no process killed killall: pppd: no process killed killall: pppd: no process killed [757.550][cmcentral ctrl stop. m] 3147 - WARN: rebooting The system is going down NOW! svc_cfg_stop is called [minidlnaShutdown:1749]shutdown minidlna.... [Mar 19 00:12:36] radvd: poll error: Interrupted system call [757.563][meshMonitor] 683 - ERROR: null [3205] Mar 19 00:12:37 Early exit: Terminated by signal [757.568][qoe] 790 - ERROR: [QoE] qoeStatisticsHandler status = GET_WAN_JITTER_LATENCY_STATISTICS : Tue Mar 19 03:11:58 2024 [757.569][SharedLib] 269 - ERROR: l_pSharedMemoryAddr null [757.569][SharedLib] 110: Deinit tp1905 library! svc_pon_stop: ............ ************************************************************* *************************MMM TABLE DUMP********************** ------------------------------------------------------------- poolhead(40) poolnum dynamictimes chainhead poolend ------------------------------------------------------------- 0x8e6008 8 0 (nil) 0x8f28ac ------------------------------------------------------------- index poolhead(20) size blocks free usage ------------------------------------------------------------- 1 0x8e6030 32 256 256 48 2 0x8e8448 64 128 128 38 3 0x8ea660 128 64 64 1 4 0x8ec778 256 32 32 1 5 0x8ee810 512 8 8 1 6 0x8ef848 1024 4 4 1 7 0x8f0870 2048 2 2 1 8 0x8f1890 4096 1 1 0 ------------------------------------------------------------- index chainnode(16) magic length prev next ------------------------------------------------------------- (nil) ************************************************************* [757.576][SharedLib] 269 - ERROR: l_pSharedMemoryAddr null [757.576][SharedLib] 110: Deinit tp1905 library! Sent SIGTERM to all processes iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 device lo left promiscuous mode [758.270][mapAgent] 247 - ERROR: EthIntfName is NULL sendto: Connection refused line(613) Msg.type(5091) pid(2794) errno(111) ret(-1) ERROR: line(695) Send Msg.type(5091) pid(2794) errno(111), ret(-1) [758.374][meshMonitor] 4220 - ERROR: send msg(5091) to ID(6), errno(111) Illegal target name 'ieee1905'. sh: write error: Invalid argument Sent SIGKILL to all processes Requesting system reboot ===> rt_pci_shutdown() reboot: Restarting system EN7523DRAMC V0.2 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0xa, ODTN:0xa DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2014.04-rc1 (Mar 19 2024 - 09:12:08) DRAM: 240 MiB EN7529CT Now running in RAM - U-Boot at: 8edff000 spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 bmt pool size: 81 BMT & BBT Init Success In: serial Out: serial Err: serial CPU0: found redistributor 0 region 0:8ee3d988 Net: ecnt_eth Uip activated use flash mac: D8:44:89:BD:CF:D8 Not found TC Phy Not found TC Phy Not found TC Phy Not found TC Phy [ CPEinit ] 465: CPE init [ cp_initCommProto ] 277: g_commProtoConfig.myMac: d8:44:89:bd:cf:d8 Boot flag csum incorrect, return image0 [ os_initCPEInfo ] 297: hw ver: XX230v v1.0 00000000 [ os_initCPEInfo ] 298: sw ver: 0.12.0 3.0.0 v6066 [ os_initCPEInfo ] 305: sn: 22445J1001433 [ os_initCPEInfo ] 308: pin: 18909296 [ os_initCPEInfo ] 315: endian: 0 [ os_initCPEInfo ] 318: acFlag: 0 [ CPEinit ] 489: CPE is idle Hit any key to stop autoboot: 6  5  4  3  2  1  0 Boot flag csum incorrect, return image0 Prepare to boot image0 Boot flag csum incorrect, return image0 bootm flag=0, states=70f ## Loading kernel from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'kernel@1' kernel subimage Description: ECONET Linux kernel Type: Kernel Image Compression: lzma compressed Data Start: 0x818022a4 Data Size: 4730117 Bytes = 4.5 MiB Architecture: ARM OS: Linux Load Address: 0x80088000 Entry Point: 0x80088000 Hash algo: sha1 Hash value: 71831c68c18b0d0ebe74b42ed8133ee86ccf6ce1 ## Loading fdt from FIT Image at 81800200 ... Using 'conf@1' configuration Trying 'fdt@1' fdt subimage Description: ECONET Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x818002fc Data Size: 7913 Bytes = 7.7 KiB Architecture: ARM Hash algo: sha1 Hash value: 73fbebcf3dfc0e0007752bdeff8c7c0f35611f24 Booting using the fdt blob at 0x818002fc Uncompressing Kernel Image ... OK Loading Device Tree to 8cdf2000, end 8cdf6ee8 ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.115 (compile@342f0d6254c6) (gcc version 4.9.3 (Buildroot 2015.08.1-gd814875) ) #1 SMP Tue Mar 19 09:18:53 UTC 2024 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: econet,en7523 bootconsole [uart0] enabled Memory policy: Data cache writealloc psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: MIGRATE_INFO_TYPE not supported. [c08472b8]npu_pkt_buf_addr=8dff37c0:8dff37c0 npu_pkt_buffer memblock_alloc:8dff37c0,buf_size=1600000 PERCPU: Embedded 12 pages/cpu @cdfd9000 s18048 r8192 d22912 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64704 Kernel command line: sdram_conf=0x00108893 vendor_name=ECONET Technologies Corp. product_name=xPON ONU ethaddr=D8:44:89:BD:CF:D8 snmp_sysobjid=1.2.3.4.5 country_code=ff ether_gpio=0c power_gpio=1515 username=telecomadmin password=nE7jA%5m dsl_gpio=0b internet_gpio=02 multi_upgrade_gpio=0b020400000000000000000000000000 onu_type=2 qdma_init=33 root=/dev/mtdblock5 ro console=ttyS0,115200n8 earlycon bootflag=0 serdes_sel=0 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 212276K/260864K available (8124K kernel code, 3998K rwdata, 2400K rodata, 240K init, 666K bss, 48588K reserved, 0K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0088000 - 0xc0acf450 (10526 kB) .init : 0xc0ad0000 - 0xc0b0c000 ( 240 kB) .data : 0xc0b0c000 - 0xc0ef3980 (3999 kB) .bss : 0xc0ef6000 - 0xc0f9c8e0 ( 667 kB) Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:64 nr_irqs:64 64 CPU0: found redistributor 0 region 0:0x09080000 Architected cp15 timer(s) running at 25.00MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 40ns console [ttyS0] enabled console [ttyS0] enabled bootconsole [uart0] disabled bootconsole [uart0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys debug CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80088280 - 0x800882d8 CPU1: found redistributor 1 region 0:0x090a0000 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (100.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. l2c_sram_size:0x0 Initializing Ecnt Event Netlink Socket Initializing Econet Event Netlink Socket nl_sk = cd579800 ecnt-hsdma 1fa01800.dma-controller: Econet HSDMA driver registered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available sgmii probe init start sgmii:int_name: sgmii_pcie0 sgmii:int_id: 0 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d087c100 sgmii:sgmii->pcs2_base= d087ea00 sgmii:sgmii->an_base= d0944000 sgmii:sgmii->ra_base= d0946600 sgmii:sgmii->phya_base= d0948c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d087ea20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_pcie1 sgmii:int_id: 1 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d094a100 sgmii:sgmii->pcs2_base= d094ca00 sgmii:sgmii->an_base= d094e000 sgmii:sgmii->ra_base= d0950600 sgmii:sgmii->phya_base= d0952c00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d094ca20, val=0 sgmii: sync_int exit sgmii probe init exit sgmii probe init start sgmii:int_name: sgmii_usb0 sgmii:int_id: 2 sgmii:int_register: inin! sgmii:sgmii->pcs1_base= d0954100 sgmii:sgmii->pcs2_base= d0956a00 sgmii:sgmii->an_base= d0958000 sgmii:sgmii->ra_base= d095a600 sgmii:sgmii->phya_base= d095cc00 sgmii:int_register: exit! sgmii: int_init called sgmii:cmd_wo:reg_t=d0956a20, val=0 sgmii: sync_int exit sgmii probe init exit TC3162 hardware watchdog module loaded. irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [crypto_k] res->name:/crypto_k@1fb70000 [crypto_k] res->start:0x1fb70000 === [crypto_k] res->end:0x1fb70803 === [crypto_k] ecnt_crypto_k->base:0xd09dc000 [trng] ecnt_trng_drv_probe test_uc:d0826000 test_c:cd4c0000 cpu_top->base:d09e6800 [apb_timer] ecnt_timer_drv_probe [timer] ecnt_timer->irq: 80 [timer] res->name:/apb_timer1@1fbf0100 i2c_slave init(ecnt_i2c_slave_drv_probe) done [i2s] ecnt_i2s_drv_probe 7523 Thermal Sensor address probe done squashfs: version 4.0 (2009/01/31) Phillip Lougher exFAT: Version 1.2.9 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) PCIe driver version: 7523.0.20210201 PCIe ref clk init. ===EN7523 PCIe init mtk-pcie 1fa91000.pcie: Port0 link down mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success ===============PCIe check===tmp_reg=========81014c3=========== mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers enabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:01.0: BAR 8: assigned [mem 0x20000000-0x201fffff] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:02:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref] pci 0000:02:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 02] pci 0000:00:01.0: bridge window [mem 0x20000000-0x201fffff] mt7512_pcie_fixup: 0x2438 = 20000015 mt7512_pcie_rc1_retrain: 80 = 0145dc12 80 = 01608c12 RC1 Link Traing Result: 10120008 ===========RC1 set conf space INTx============= ttyS0 at I/O 0xbfbf0000 (irq = 95, base_baud = 7200) is a TC3162 ECNT ring buffer init success brd: module loaded SPI Flash Init Start Found no SPI flash device IS_SPIFLASH=0x0, IS_NANDFLASH=0x1, (0xBFA10114)=0x6) Set SPI Clock to 50 Mhz spi_nand_probe: mfr_id=0xc8, dev_id=0x1 Using Flash ECC. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_F50L1G41LB, Flash Size=0x8000000 spi nand flash tc3162: flash device 0x02000000 at 0x00000000 EN7512 mtd init: spi nand probe enter [spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x01 nand: Unknown _SPI_NAND_DEVICE_ID_F50L1G41LB nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand_scan_ident ok [spi_nand_setup]: chip size = 0x8000000, erase_shift=0x11 bmt pool size: 81 BMT & BBT Init Success Creating 11 MTD partitions on "EN7512-SPI_NAND": 0x000000000000-0x000004000000 : "whole" 0x000000000000-0x000000080000 : "boot" 0x000000080000-0x0000000a0000 : "romfile" 0x0000000a0000-0x0000001a0000 : "misc" 0x0000001a0000-0x0000009a0000 : "kernel" 0x0000009a0000-0x000002000000 : "rootfs" 0x0000001a0000-0x000002000000 : "firmware" 0x000002000000-0x000002800000 : "kernel_slave" 0x000002800000-0x000003e60000 : "rootfs_slave" 0x000002000000-0x000003e60000 : "firmware_slave" 0x000003fe0000-0x000004000000 : "reserve" rootfs PPP generic driver version 2.4.5 PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 register rtpci pci 0000:00:01.0: enabling device (0140 -> 0142) rtpci 0000:02:00.0: enabling device (0140 -> 0142) === pAd = d3201000, size = 9391104 === <-- RTMPAllocAdapterBlock, Status=0 PCI CSRBaseAddress =0xd3100000, csr_addr=0xd3100000! RTMPInitPCIeDevice():device_id=0x7915 mt7915_init()--> Use the default iPAiLNA bin image! <--mt7915_init() wdev_init(caller:RTMP_COM_IoctlHandle+0x1190/0x19d8), wdev(0) !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only !!HIF_RX_EVENT Only <-- pci_alloc_tx_rx_ring_mem, Status=0 Error: host_notify_npuMbox timeout for core_id:0, func_id:0 WIFI_MAIL_API_GET_WAIT_COUNTER fail! USB driver version: 7523.3.20210202 port 0 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 port 1 u2_slew_rate_cal_7523 FM_OUT value = 100(0x00000064) SR calibration value = 6 xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhci-hcd 1fab0000.xhci: xHCI Host Controller xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver cypress_m8 usbserial: USB Serial support registered for DeLorme Earthmate USB usbserial: USB Serial support registered for HID->COM RS232 Adapter usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3316 buckets, 13264 max) ludewei add module gre: GRE over IPv4 demultiplexor driver IPv4 over IPsec tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 lib80211: common routines for IEEE802.11 drivers Registering SWP/SWPB emulation handler tc3162ser_startup squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored squashfs: SQUASHFS error: unable to read xattr id index table VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Freeing unused kernel memory: 240K busybox init and set aff starting pid 444, tty '': '/etc/init.d/rcS' insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/sd_mod.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/scsi/scsi_wait_scan.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/drivers/usb/core/usbcore.ko': No such file or directorusbcore: registered new interface driver usb-storage y insmod: can't insert '/lib/modules/kmdir/kernel/fs/fuse/fuse.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_utf8.ko': No such file or directory insmod: can't insert '/lib/modules/kmdir/kernel/fs/nls/nls_cp936.ko': No such file or directory tp_board: loading out-of-tree module taints kernel. Register flash device: flash0 rcS (444): drop_caches: 3 start XPON related APP /tmp/cfg_load is not exist,left time 30 svchost_parse_print_conf: Path = /lib/libcfg_clisvc.so svchost_parse_print_conf: Entry = svc_cfg_main svchost_parse_print_conf: Param = 111 random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) shm_pool_init: base[20000000] size[00200000]] shm_pool_init: Init Done! random: ubusd: uninitialized urandom read (4 bytes read, 15 bits of entropy available) svc_cfg_start: ........ Load cfg from file [/var/romfile.cfg] ..... tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> gic tar: short read cp: can't [check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> stat '/tmp/ctromfile.cfg': No such file or directory Use backup romfile to check! Couldn't open mtd:reservearea! mtd[readflash]:device=reservearea tclen=262144 tcoffset=524288 Unlocking reservearea ... Could not open mtd device: reservearea [BK_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_backupromfile 262144 524288 reservearea tar: invalid m[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> agic tar: short read cp: can't s[check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> tat '/tmp/ctromfile.cfg': No such file or directory Use default romfile to check! mtd[readflash]:device=reservearea tclen=262144 tcoffset=786432 Unlocking reservearea ... Could not open mtd device: reservearea [DEF_ROMFILE_FLAG]/userfs/bin/mtd readflash /tmp/tc_defaultromfile 262144 786432 reservearea tar: invalid ma[check_checksum:738]:tc_checksum open file(/tmp/ctromfile.cfg) failed===> gic tar: short read cp: can't sta[check_romfile:918]:check_checksum=-1,Romfile checksum is wrong===> t '/tmp/ctromfile.cfg': No such file or directory /tmp/cfg_load is not exist,left time 29 Use usrfs romfile to check! mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea ctromfile.cfg <> mtd[readflash]:device=reservearea tclen=2120 tcoffse[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. t=1310720 Unlocking reservearea ... Could not open mtd device: reservearea handle_proline_paras 1564 SSID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ha[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ndle_p[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. roline[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. _paras [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 1564 [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. WPAPSK[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. :123456[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 78. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. handrandom: ubusd: uninitialized urandom read (4 bytes read, 53 bits of entropy available) le_proli[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ne_pa[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. ras 1[ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. 564 Srandom: ubusd: uninitialized urandom read (4 bytes read, 57 bits of entropy available) SID:ChinaNet-AP. [ponmgr_lib_ioctl][196]:===Fail Exit===Couldn't open /dev/pon, fd = -1. handle_proline_paras 1564 WPAPSK:12345678. hrandom: ubusd: uninitialized urandom read (4 bytes read, 59 bits of entropy available) andle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 SSID:ChinaNet-AP. handle_proline_paras 1564 WPAPSK:12345678. handle_proline_paras 1564 web_passwd:1234. handle_proline_paras 1564 SerialNumber:FHTT12345678. parse proline para Password fail. parse proline para Password fail. handle_proline_paras 1564 Mode:GPON. root.mesh.apclibh.entry.1:BhProfileSsid not found. root.mesh.apclibh.entry.1:BhProfileWpaPsk not found. root.mesh.apclibh.entry.2:BhProfileSsid not found. root.mesh.apclibh.entry.2:BhProfileWpaPsk not found. handle_proline_paras 1564 (null):1. cfg_save_object: open file [/tmp/var/romfile.cfg] fail ----> Load config file fail. svc_cfg_start: ........ ok [20001030]! svchost_get_event_val: get param fail [0] start omci module_sel: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint svchrandom: ubusd: uninitialized urandom read (4 bytes read, 72 bits of entropy available) ost_parse_print_conf: Path = /lib/libcentral_ctrl_svc.so svchost_parse_print_conf: Entry = svc_central_ctrl_main svchost_parse_print_conf: Param = 111 svchost_prandom: ubusd: uninitialized urandom read (4 bytes read, 75 bits of entropy available) arse_print_conf: Pathecnt_register_cpu_interrupts = /lib/libpon_svc.so svchost_parse_print_conf: Entry = svc_pon_main svchost_parse_print_conf: Param = 111 TC3162 LED Manager 0.1 init tcledctrl version: tcledctrl V1.1.0.0 (Mar 19 2024-09:20:52). led path:/userfs/7529_62led.conf random: ubusd: uninitialized urandom read (4 bytes read, 77 bits of entropy available) svc_pon_int: ...... reg event ok svc_pon_int: ...... reg method ok cfg svc load done, 0 ms svchost_get_event_val: get param fail [0] [svc_cfg_load_special_info][581]SET [omci_lib_set_max_ports_list] Result=0 Couldn't open mtd:reservearea! random: ubusd: uninitialized urandom read (4 bytes read, 81 bits of entropy available) svc_centrl_ctrl_init: ...... reg event ok mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservdev mount is start! econfig area ... Could not open mtd device: resertccicmd V1.1.0.0 (Mar 19 2024-09:20:58) ERROR!Create /etc/fwTCver.conf fail! vear0 ea PID=551 event receive pthread_create OK, keep going...... svchost_get_event_val: get param fail [0] Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][639]SET [omci_lib_set_onu_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720nlksock_create:nlksock create err:Protocol not supported! random: ubusd: uninitialized urandom read (4 bytes read, 91 bits of entropy available) Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't opactive_notify_handler: nlksock_create fail en /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf mtd[readfla SIFMaster 0.1 init ===== Interface 0 is ON ===== Register sifm cmd sh]:device=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][654]SET [omci_lib_set_equipment_id] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][661]SET [oam_lib_set_hardware_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_(gdump_mode_sel): GDUMP sel has switch to 3 ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215 cfg_load_special_info][666]SET [oam_lib_set_software_version] Result=0 mtd[readflash]:device=reservearea tclen=2120 tcoffset=1310720 Unlocking reservearea ... Could not open mtd device: reservearea Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf Can't open /etc/deviceParaStatic.conf [svc_cfg_load_special_info][672]SET [oam_lib_set_onu_model] Result=0 mount: mounting /dev/mtdblock0 on /usr/config/WLan/MAP failed: No such file or directory insmod: can't insert '/lib/modules/crypto_k.ko': No such file or directoryrandom: nonblocking pool is initialized ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:2 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:3 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:1 ifc_set_action: cpu:1, nbq:7 ifc_set_action: cpu:1, nbq:8 macType = 0 flashQdmaInit = 0x33 TP_User Ecnt ponTime:OMCI Startup netif_napi_add() called with weight 256 on device lan_int2_if ether.c:v1.00-NAPI 29.Mar.2015 eth0: FE MAC Ethernet address: D8:44:89:BD:CF:D8 Use Internal switch ,type 10 tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9 GE Rext AnaCal Done! (7)(0x27) GE Rext AnaCal Done! (7)(0x27) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (6)(0x25) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (8) (0x28) GE Tx amp AnaCal Done! (14) (0x2e) GE Tx amp AnaCal Done! (14) (0x2e) [tcPhyInit] in Unlocking config ... Could not open mtd device: config [tcPhyInit] out , r31 = (9, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (9)(0x28) GE Tx offset AnaCal Done! (6)(0x25) GE Tx amp AnaCal Done! (1) (0x21) GE Tx amp AnaCal Done! (7) (0x27) GE Tx amp AnaCal Done! (15) (0x2f) GE Tx amp AnaCal Done! (15) (0x2f) [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) GE Tx offset AnaCal Done! (3)(0x22) GE Tx offset AnaCal Done! (10)(0x29) GE Tx offset AnaCal Done! (7)(0x26) GE Tx offset AnaCal Done! (6)(0x25) GE Tx amp AnaCal Done! (11) (0x2b) GE Tx amp AnaCal Done! (9) (0x29) GE Tx amp AnaCal Done! (17) (0x31) GE Tx amp AnaCal Done! (12) (0x2c) [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0) tcPhyVerLookUp 2446 94A1 7523 Ge, , port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9 GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) GE Tx offset AnaCal Done! (6)(0x25) GE Tx offset AnaCal Done! (8)(0x27) GE Tx offset AnaCal Done! (4)(0x23) GE Tx offset AnaCal Done! (3)(0x22) GE Tx amp AnaCal Done! (2) (0x22) GE Tx amp AnaCal Done! (11) (0x2b) GE Tx amp AnaCal Done! (2) (0x22) GE Tx amp AnaCal Done! (13) (0x2d) [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) mount: can't not found str : MAP, erase and mount again eth0: starting interface. netif_start_queue findev_mount is ok d /dev/mtdblock in /etc/fstab macType = 0 flashQdmaInit = 0x33 fe resource init start 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left 16 acnt1 id has been used, there is no left Ralink HW NAT Module Enabled you need to modify struct FoeEntryExtKernel in ecnt_forward_left_to_right.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512 HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384 IP check use Black List EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw [c0847268]isForceToCpu=0:0 copy NPU binary:/userfs/npu_rv32.bin(60264 Bytes) to 0xd0f00000 copy NPU binary:/userfs/npu_data.bin(728 Bytes) to 0xd0b80000 [C0]core freq at 333000000 Hz [C0]timer_init: Timer clk is running at 125 Mhz [C0]wcid_counter_init:0 [C0]wcid_counter_init:1 [C0][NPU] ba_node_init... [C0]baNode_array_init [C0]counter_init:2 [C0][NPU] queue_mutex_init... [C0]qdma_init [C1]core1_main [C2]timer_isr Store Value 1e903000, val[C2]core2_main [C3]core3_main [C3]do npu_enq_deq_init [c0847244]npu_pkt_buf_addr=8dff37c0 npu_wifi_offload_get_pkt_buf_addr=8dff37c0 [c0847244]npu_pkt_buf_addr=8dff37c0 [C0]wifi_mail_data->wifi_mail_private.npuPktBufAddr=8dff37c0, 8dff37c0 npu_wifi_offload_get_force_to_cpu_flag=0 isForceToCpu=0 [C0](core0_main) just return, because QDMA driver for ARM is not ready whnat_module_init(): module init and register callback for whnat create whnat_ctrl ok!!! wed_slot_map_get(): assign slot_id:0 for entry: 0! wed_slot_map_get(): assign slot_id:1 for entry: 1! tso_lan: tso_v2.c [201]: dscpDmaAddr =8a2b0000 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 tso_proc_init. val_string:add v4 - 445 - - dport:0, sport:445, daddr:0, saddr:0 ---- 7570_bob.conf ---- ---- cp -f /etc/7570_bob.conf /tmp/ ---- do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 296: PON FLASH CALIB: data[0]=17 data[1]=04 data[2]=30 data[3]=04 do_tp_readPONCalibrationFlashTo7570bobFileWithCheck, 322: read pon calibration flash success! ---- flashtool readflashtobob ---- ______ XPON_PHY init ______ little endian NCPO_RECOVER 0, PHY_TX_TDC_HOLD_EN 0, NCPO_RECOVER_DBG_MSG 0 xPON PHY initialization done E3 patched EN7571 found! FLASH matrix got PWRADC offset = 0x33ae PWRADC ready BG 1.76V = 0x286 BG 0.875V = 0x141 RSSI_Vref = 0x20f RSSI_V = 0x29a eFuse value = 0xe eFuse offset = 4.2'C Start GPON Tx Calibration CDR disabled RGS_T0C = 0x42 RGS_T1C = 0x43 CDR enabled APD initialization done en7571_reg_init Initial current loaded PWR/ER loaded TIASD = 0x24 Rx LOS is set Internal DDMI Enabled KT Enabled EN7571 Initialization Done! PON PHY driver version is 2100825.116.11 xPON driver initialization Alloc data struct memory successful, 36508 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 the channel id_is must between 0 and 15 XPON Mapping Module init OK! vtag_drv_init tc_multiwan version: tcsmux V1.1.0.0 (Mar 19 2024-09:21:03). pon_vlan_init Multi Lan port initilize xpon igmp module....done! pon_mac_filter_init Multi Lan portinsmod: can't insert '/lib/modules/mtk_xpon_ PPTP VPN offload module init multicast.ko': No such file or directory L2TP VPN offload module init device eth0 entered promiscuous mode device eth0.1 is not a slave of br0 device eth0.2 is not a slave of br0 device eth0.3 is not a slave of br0 device eth0.4 is not a slave of br0 device eth0 is already a member of a bridge; can't enslave it to bridge br0. device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready device eth0.1 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready device eth0.2 entered promiscuous mode IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready device eth0.3 entered promiscuous mode device eth0.4 is not a slave of br0 ifconfig: ioctl 0x8913 failed: No such device interface eth0.5 does not exist! insmod: can't insert '/lib/modules/igmpsnoop.ko': No such file or directory insmod: can't insert '/lib/modules/mldsnooping.ko': No such file or directory insmod: can't insert '/lib/modules/lro_lan.ko': No such file or directory insmod: can't insert '/lib/modules/lro_wan.ko': No such file or directory ifconfig: SIOCSIFMTU: Invalid argument vlan tag restore switch : enable insmod: can't insert '/lib/modules/dying_gasp.ko': No such file or directory start ponmgr_cfg MTK DSP support rcS (444): drop_caches: 3 set pptp_offload proto value 1 rcS.sdk init done! creat_domain_proc ok tp_domain init ok device recognition register success VoIPBasic_Common SIPProtocol is SIP prevSipStatus: 0, curSipStatus: 0 voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0 [1970-1-1 Thu 00:00:15.597956]omci start! [1970-1-1 Thu 00:00:15.604944]main gponOmciCmsgsrvInit [1970-1-1 Thu 00:00:15.615869]OMCI wait for DM init... status: DSPCore[Ver:TVB1.0.23.800-4-P102-1] [1] PCM V2.4 (Dec 18 2023 23:20:57) bind irq-113 to CPU1 PCM_INT=28 pcm[Ver:TVB1.0.23.800-4-P102-1] lec[Ver:TVB1.0.23.800-4-P102-1] SYS_HCLK=250 Major Num:233, device: spi spi[Ver:TVB1.0.23.800-4-P102-1] [16.074][cos] ========fxs3 init start======== ========fxs3 init complete======== 422 - ERROR: before cpu mask 00000003 [16.074][cos] 437 - ERROR: after cpu mask 00000001 . init mod-slic3 slic3[Ver:TVB1.0.23.800-1] mode= ISI init mod-ksocket ksocket[Ver:TVB1.0.23.800-1] monitor value xxxxxxx ortp[Ver:TVB1.0.23.800-4-P102-1] init mod-acodec acodec[Ver:TVB1.0.23.800-4-P102-1] ponTime:ONU Ready init mod-foip3 foip3[Ver:TVB1.0.23.800-4-P102-1] mtd[readflash]:device=reservearea tclen=1 tcoffset=2097152 Unlocking reservearea ... Could not open mtd device: reservearea ponTime:Connection Start working_mode: 10 [42949389970ms][phy_init.c:1356] __2__PON_SET_PHY_START__1st__ [1]is_config_mode=0 [2]phy_start irq=0 ==> EPON OAM Start need 1s:4294239327us Silabs SLIC type selected by SW makefile compile option [4294939004][slic][INFO][gpio_clocksrc_init:L2399]ISI [4294939005][spi][INFO][SPI_Reset:L473] SPI_Reset 2 Interface name length cannot exceed 15 characters. Interface name length cannot exceed 15 characters. slic deviceVerify ProSLIC_Version 9.1.0 Silabs SLIC Reset REG_0 = 0xaa ,device[0], Part_num 0x5, Revision 0x2 device[0]:deviceVerify Success! SPI Reset times:1 pcm1 ch num:1 pcm2 ch num:0 fxs[Ver:TVB1.0.23.800-4-P102-1] [fxs_init_action](1344)noinit=0 pcm1 ch num:1 pcm2 ch num:0 Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) , deviceNum(1) deviceInit on DeviceId = 0 ProSLIC_createControlInterface = 0 ProSLIC_createDevice = 0 get_start_chanid=0 ProSLIC_createChannel = 0 ProSLIC_SWInitChan = 0 device [0] chanPvt[0].chanType 1 device [0] chanPvt[0].chipType 6 Si3218x_Init_with_Options(640) size = 1 init_opt = 0 SiVoice: Channel 0: Type = PROSLIC Rev = 2 ProSLIC:loading patch: 06302015 . Si3218x: Channel 0 : VBAT Up = 58.849 v [42949390980ms][phy_init.c:1946] PON PHY scu_reset_init mode=10 [42949390980ms][phy.c:839] __1__phy_mode_config__1st__ [1]is_config_mode=1 [2]phy_start irq=2 mode: 1 [42949390980ms][phy_init.c:1946] PON PHY scu_reset_init mode=1 [42949391000ms][phy_init.c:1553] __1__phy_mode_config__req_isr__ [1]is_config_mode=1 [2]phy_start irq 2 ==> 1 ProSLIC:Starting LB Cal on channel 0 .init mod-vdsp for 1 channels 2 sessions vdsp[Ver:TVB1.0.23.800-4-P102-1] =============================== || MTK DSP init successfully || =============================== pid 2's current affinity mask: 3 pid 888's current affinity mask: 1 [42949392010ms][phy_init.c:1946] PON PHY scu_reset_init mode=1 Auto EPON IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [42949393020ms][phy_init.c:1946] PON PHY scu_reset_init mode=0 Auto GPON ___ COUNTRY SETTING ___ ring_idx : 0 imp_idx : 0 ProSLIC:PCMStart slic_set_gainLv - fffffffa / 0 pid 888's new affinity mask: 2 fxsSetLine[0]state 0x9 State UNKNOWN ! pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 2's current affinity mask: 3 pid 1067Dump SLIC[0] register: '================================= 00 01 02 03 04 05 06 07 08 09 ================================= 00: aas00 00 1f 00 40 00 a2 e5 ff 10: 25 13 00 00 00 20 00 02 00 00 20: 00 00 00 02 00 00 00 00 00 00 30: 11 00 00 10 00 00 00 02 00 40 40: 1f 00 7d 00 00 59 04 10 66 00 50: 00 00 00 00 00 00 00 00 ff 00 60: 00 00 e4 00 00 00 00 00c f0 00 70: 00 00 00 00 00 00 02 00 00 00 80: 3f 01 b7 03 af 05 0e 0f ed 10 90: 40 07 9f 06 c1 11 24 05 80 05 u100: 00 01 00 00 00 00 00 00 00 00 110: 00 00 47 01 2e 00 02 ff 38 00 120: e5 05 39 0e 00 20 03 00 ================================= rrent affinitywrite address(47) value : 0x8 mask: 1 pid 1067's new affinity mask: 2 [20.964][cos] 317 - ERROR: checkMiscSize: MTD_OFS_PC_HISTORY_ADDR(3e60000) + MTD_OFS_PC_HISTORY_SIZE(60000) = (3ec0000) /etc/init.d/rcS: line 195: can't create /proc//oom_score_adj: nonexistent directory rcS (444): drop_caches: 3 rcS init done! Please press Enter to activate this console. sleep 90s! [21.372][cmm] 2219 - ERROR: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml [22.067][cmm] 1048: X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002 [22.071][cos] Disable GPON ONU 715 - ERROR: Disable gpon driver before true SN set [22.110][cos] 253 - ERROR: COS wait for OMCI init... [22.110][cos] 259 - ERROR: OMCI init use 0 seconds! ===========>manufacture:0, ISPflag:0 IPv6: ADDRCONF(NETDEV_UP): br_agc: link is not ready device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 interface eth0.5 does not exist! device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode device eth0.3 entered promiscuous mode [1970-1-1 Thu 00:00:22.790176]DM init use 7 seconds! [1970-1-1 Thu 00:00:22.796566]OMCI wait for RSL init... IPv6: ADDRCONF(NETDEV_UP): eth0.4: link is not ready device eth0.4 entered promiscuous mode ifconfig: ioctl 0x8913 failed: No such device sh: can't create /proc/sys/net/ipv6/conf/eth0.5/disable_ipv6: nonexistent directory interface eth0.5 does not exist! br_agc: port 2(eth0.2) entered forwarding state br_agc: port 2(eth0.2) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br_agc: link becomes ready updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 sendto: No such file or directory line(593) Msg.type(2014) pid(860) errno(2) ret(-1) [ read_dhcpc_config ] 128: error, unable to open config file: /var/tmp/dconf/udhcpc.conf [25.030][cos] 121 - ERROR: CQC:tm_start:25, tm_end:25 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [27.040][cos] 121 - ERROR: CQC:tm_start:25, tm_end:27 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [29.050][cos] 121 - ERROR: CQC:tm_start:25, tm_end:29 [err] syslogd[syslogd_msg_process --673] syslogd : log module is not config [31.060][cos] 121 - ERROR: CQC:tm_start:25, tm_end:31 [31.060][cos] 137 - ERROR: CQC:FAILED! [31.060][cos] 775 - ERROR: Expire time! device eth0.1 left promiscuous mode br_agc: port 1(eth0.1) entered disabled state device eth0.2 left promiscuous mode br_agc: port 2(eth0.2) entered disabled state device eth0.3 left promiscuous mode br_agc: port 3(eth0.3) entered disabled state device eth0.4 left promiscuous mode br_agc: port 4(eth0.4) entered disabled state interface eth0.5 does not exist! [31.382][cmm] 591: num of CPU core = 2. [31.383][cmm] 601: parent pid 860 [31.465][cmm] 608: start creating dropbear RSA key at CPU core 1. [31.466][cmm] 618: child pre cpu mask 00000001 [31.466][cmm] 632: child post cpu mask 00000002 [31.467][cmm] 636: Try create dropbear RSA key loop=0 ... Generating 2048 bit rsa key, this may take a while... [31.679][cmm] 3192 - ERROR: Open TZ file error! ddns_ud> start enable = 0, server: , auth: , request killall: dnsmasq: no process killed [32.180][cmm] 158 - WARN: Empty DNSServer() [32.339][cmm] 158 - WARN: Empty DNSServer() [32.373][cmm] 158 - WARN: Empty DNSServer() bridge name br0 has exist bridge name br0 has exist device br0 already exists; can't create bridge with the same name IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready done [32.659][cmm] 203 - ERROR: ifName is eth0, vid is 5 [32.681][cmm] 203 - ERROR: ifName is eth0, vid is 4 vconfig: ioctl error for add: File exists [32.694][cmm] 203 - ERROR: ifName is eth0, vid is 3 vconfig: ioctl error for add: File exists [32.706][cmm] 203 - ERROR: ifName is eth0, vid is 2 vconfig: ioctl error for add: File exists [32.719][cmm] 203 - ERROR: ifName is eth0, vid is 1 vconfig: ioctl error for add: File exists [32.732][cmm] 203 - ERROR: ifName is eth0, vid is 0 sh: can't create /proc/tplink/eth_vlan: nonexistent directory device eth0.1 entered promiscuous mode [32.867][cmm] 257 - ERROR: pAddIfMsg->addIfName:br0 pAddIfMsg->boundIfName: Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. [32.887][ipv6] 1015 - WARN: Could not find pid of dibbler-server with interface name is br0! [32.891][ipv6] 619 - ERROR: Can't find interface: br0 [32.902][ipv6] 1380 - WARN: Could not find pid of radvd with interface name is br0! device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready device eth0.3 entered promiscuous mode br0: port 1(eth0.1) entered disabled state device eth0.1 left promiscuous mode br0: port 1(eth0.1) entered disabled state br0: port 2(eth0.2) entered disabled state device eth0.2 left promiscuous mode br0: port 2(eth0.2) entered disabled state br0: port 3(eth0.3) entered disabled state device eth0.3 left promiscuous mode br0: port 3(eth0.3) entered disabled state device eth0.4 is not a slave of br0 device eth0 entered promiscuous mode br0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state device eth0.3 entered promiscuous mode device eth0.4 entered promiscuous mode device eth0.5 is not a slave of br0 iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. device eth0.4 is already a member of a bridge; can't enslave it to bridge br0. [33.572][cmm] 159 - ERROR: band:2.4GHz has created public apObj, apObj.X_TP_APType:Public [33.573][cmm] 169 - ERROR: 2.4GHz radio has created the public apObj, go next. [33.573][cmm] 159 - ERROR: band:5GHz has created public apObj, apObj.X_TP_APType:Public [33.573][cmm] 169 - ERROR: 5GHz radio has created the public apObj, go next. [33.574][cmm] 2023 - ERROR: Dut is not in manufacturing mode!devInfoObj.X_TP_IsManufacture:0 ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ifconfig: ioctl 0x8913 failed: No such device ra0: ===> main_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT load l1profile succeed! WHNAT=1 whnat_cap_support(): chip_id=7915 is in WHNAT support list wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 wed_init(1): irq=91,base_addr=0xd57b2000 ----->wed_tx_ring_init() 805 len=40 ----->wed_tx_ring_init() 816 len=98376 sizeof(whnat_ring)=49188, ring_ctrl->ring_num=2 tx_ring_init() whnat_dma_buf_alloc for glb_ring_ctrl_desc[0]=32768 tx_ring_init() whnat_dma_buf_alloc for glb_ring_ctrl_desc[1]=32768 wed_ring_init(): wed ring init result = 0 token_info_init() whnat_dma_buf_alloc for glb_wed_buf_res=114688 whnat_dma_buf_alloc for glb_var_whnat_fbuf[1]=917504 ---------> token_info_alloc() len=372736, eid=7168, sizeof(struct wed_token_info)=52 skb_len=1900 create wed ok!!! wdma_init(): wdma(1) base addr=d58c4400 wdma_init(): wdma(1) irq[0]=87 wdma_init(): wdma(1) irq[1]=88 wdma_init(): wdma(1) irq[2]=89 rx_ring_init() whnat_dma_buf_alloc for glb_wdma_rx_ring_ctrl[0]=16384 rx_ring_init() whnat_dma_buf_alloc for glb_wdma_rx_ring_ctrl[1]=16384 wifi_chip_probe(): Chang CHIP IRQ: 83 to WHNAT IRQ: 91 wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 whnat_probe(): probe fail since whnat is full! whnat_dev0: probe of 1fa02000.wed2 failed with error -1 mt_service_open: wlan service opens successfully! APWdsInitialize():WdsEntry[0~15] multi_profile_merge_radius_key:RTMPGetKeyParameter 717 fail!updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 [multi_profile_merge_5g_only] DBDC_MODE=1 multi-profile merge success, en:1,pf1_num:7,pf2_num:7,total:14 Open file "/var/Wireless/RT2860AP/DBDC_card0.dat" to store DBDC cfg! (23) Write file "/var/Wireless/RT2860AP/DBDC_card0.dat" success (size=8228)! BssidNum=14 Pf2MbssIdxMap: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 MacAddress7 = 00:00:00:00:00:00 E2pAccessMode=2 SSID[0]=TP-Link_CFD8, EdcaIdx=0 SSID[1]=TP-Link_CFD8_1, EdcaIdx=0 SSID[2]=TP-Link_CFD8_2, EdcaIdx=0 SSID[3]=TP-Link_CFD8_Guest, EdcaIdx=0 SSID[4]=26e3d8a1df367885e74acba9a98bad, EdcaIdx=0 SSID[5]=aa9a343d07a79aa66ef85877e21dee, EdcaIdx=0 SSID[6]=e2b6520c958f5e14820332d7ee1a39, EdcaIdx=0 SSID[7]=TP-Link_CFD8, EdcaIdx=0 SSID[8]=TP-Link_CFD8_1, EdcaIdx=0 SSID[9]=TP-Link_CFD8_2, EdcaIdx=0 SSID[10]=TP-Link_CFD8_Guest, EdcaIdx=0 SSID[11]=1b34392d9f7a4e17d86ba5fb123da0, EdcaIdx=0 SSID[12]=c6e19271450d7592b4d756a75474eb, EdcaIdx=0 SSID[13]=895292acce55edb97159c9a0006ea6, EdcaIdx=0 RTMPSetProfileParameters(): DBDC Mode=1, eDBDC_mode = 1 cfg_mode=16 cfg_mode=16 cfg_mode=16 wmode_band_equal(): Band Equal! cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=16 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 cfg_mode=17 auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 auto_ch_select_set_cfg(): BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 2G Channel of config parameter must set 0: Index0 Channel=1 RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: RTMPChannelCfg:Warning:ACS Enable and the 5G Channel of config parameter must set 0: Index1 Channel=36 BndStrgBssIdx=1;0;0;0;0;0;0;1;0;0;0;0;0;0 [TxPower] BAND0: 100, BAND1: 100 [SKUenable] BAND0: 1, BAND1: 1 [PERCENTAGEenable] BAND0: 1, BAND1: 1 profile: FragThreshold[0]=2346 profile: FragThreshold[1]=2346 profile: FragThreshold[2]=2346 profile: FragThreshold[3]=2346 profile: FragThreshold[4]=2346 profile: FragThreshold[5]=2346 profile: FragThreshold[6]=2346 profile: FragThreshold[7]=2346 profile: FragThreshold[8]=2346 profile: FragThreshold[9]=2346 profile: FragThreshold[10]=2346 profile: FragThreshold[11]=2346 profile: FragThreshold[12]=2346 profile: FragThreshold[13]=2346 APEdca0 Valid=1 APAifsn[0]=3 APAifsn[1]=7 APAifsn[2]=1 APAifsn[3]=1 APEdca1 Valid=1 APAifsn[0]=3 APAifsn[1]=7 APAifsn[2]=1 APAifsn[3]=1 APEdca2 APEdca3 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 BSSAifsn[0]=3 BSSAifsn[1]=7 BSSAifsn[2]=2 BSSAifsn[3]=2 UAPSDCapable[0]=0 UAPSDCapable[1]=0 UAPSDCapable[2]=0 UAPSDCapable[3]=0 UAPSDCapable[4]=0 UAPSDCapable[5]=0 UAPSDCapable[6]=0 UAPSDCapable[7]=0 UAPSDCapable[8]=0 UAPSDCapable[9]=0 UAPSDCapable[10]=0 UAPSDCapable[11]=0 UAPSDCapable[12]=0 UAPSDCapable[13]=0 default ApCliUAPSDCapable[0]=0 default ApCliUAPSDCapable[1]=0 DfsZeroWait Support=0/0 DfsZeroWaitCacTime=255/255 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[0] read_itxbf: MBSS[0] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[1] read_itxbf: MBSS[1] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[2] read_itxbf: MBSS[2] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[3] read_itxbf: MBSS[3] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[4] read_itxbf: MBSS[4] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[5] read_itxbf: MBSS[5] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[6] read_itxbf: MBSS[6] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[7] read_itxbf: MBSS[7] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[8] read_itxbf: MBSS[8] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[9] read_itxbf: MBSS[9] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[10] read_itxbf: MBSS[10] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[11] read_itxbf: MBSS[11] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[12] read_itxbf: MBSS[12] ITxBfEn = 1 read_itxbf: ITxBfEn = 1 read_itxbf: BSSID[13] read_itxbf: MBSS[13] ITxBfEn = 1 read_itxbf: Common.ITxBfEn = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[0] read_etxbf: MBSS[0] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[1] read_etxbf: MBSS[1] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[2] read_etxbf: MBSS[2] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[3] read_etxbf: MBSS[3] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[4] read_etxbf: MBSS[4] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[5] read_etxbf: MBSS[5] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[6] read_etxbf: MBSS[6] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[7] read_etxbf: MBSS[7] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[8] read_etxbf: MBSS[8] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[9] read_etxbf: MBSS[9] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[10] read_etxbf: MBSS[10] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[11] read_etxbf: MBSS[11] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[12] read_etxbf: MBSS[12] ETxBfEnCond = 1 read_etxbf: ETxBfEnCond = 1 read_etxbf: BSSID[13] read_etxbf: MBSS[13] ETxBfEnCond = 1 MBSS[0] MuOfdmaDlEnable = 0 MBSS[1] MuOfdmaDlEnable = 0 MBSS[2] MuOfdmaDlEnable = 0 MBSS[3] MuOfdmaDlEnable = 0 MBSS[4] MuOfdmaDlEnable = 0 MBSS[5] MuOfdmaDlEnable = 0 MBSS[6] MuOfdmaDlEnable = 0 MBSS[7] MuOfdmaDlEnable = 0 MBSS[8] MuOfdmaDlEnable = 0 MBSS[9] MuOfdmaDlEnable = 0 MBSS[10] MuOfdmaDlEnable = 0 MBSS[11] MuOfdmaDlEnable = 0 MBSS[12] MuOfdmaDlEnable = 0 MBSS[13] MuOfdmaDlEnable = 0 MBSS[0] MuOfdmaUlEnable = 0 MBSS[1] MuOfdmaUlEnable = 0 MBSS[2] MuOfdmaUlEnable = 0 MBSS[3] MuOfdmaUlEnable = 0 MBSS[4] MuOfdmaUlEnable = 0 MBSS[5] MuOfdmaUlEnable = 0 MBSS[6] MuOfdmaUlEnable = 0 MBSS[7] MuOfdmaUlEnable = 0 MBSS[8] MuOfdmaUlEnable = 0 MBSS[9] MuOfdmaUlEnable = 0 MBSS[10] MuOfdmaUlEnable = 0 MBSS[11] MuOfdmaUlEnable = 0 MBSS[12] MuOfdmaUlEnable = 0 MBSS[13] MuOfdmaUlEnable = 0 MBSS[0] MuMimoDlEnable = 1 MBSS[1] MuMimoDlEnable = 1 MBSS[2] MuMimoDlEnable = 1 MBSS[3] MuMimoDlEnable = 1 MBSS[4] MuMimoDlEnable = 1 MBSS[5] MuMimoDlEnable = 1 MBSS[6] MuMimoDlEnable = 1 MBSS[7] MuMimoDlEnable = 1 MBSS[8] MuMimoDlEnable = 1 MBSS[9] MuMimoDlEnable = 1 MBSS[10] MuMimoDlEnable = 1 MBSS[11] MuMimoDlEnable = 1 MBSS[12] MuMimoDlEnable = 1 MBSS[13] MuMimoDlEnable = 1 MBSS[0] MuMimoUlEnable = 1 MBSS[1] MuMimoUlEnable = 1 MBSS[2] MuMimoUlEnable = 1 MBSS[3] MuMimoUlEnable = 1 MBSS[4] MuMimoUlEnable = 1 MBSS[5] MuMimoUlEnable = 1 MBSS[6] MuMimoUlEnable = 1 MBSS[7] MuMimoUlEnable = 1 MBSS[8] MuMimoUlEnable = 1 MBSS[9] MuMimoUlEnable = 1 MBSS[10] MuMimoUlEnable = 1 MBSS[11] MuMimoUlEnable = 1 MBSS[12] MuMimoUlEnable = 1 MBSS[13] MuMimoUlEnable = 1 [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=3, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=4, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=5, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=6, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=7, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=8, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=9, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=10, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=11, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=12, Desired MFPC=0 [PMF]Set_PMFMFPC_Proc:: apidx=13, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=3, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=4, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=5, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=6, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=7, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=8, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=9, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=10, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=11, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=12, Desired MFPR=0 [PMF]Set_PMFMFPR_Proc:: apidx=13, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=3, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=4, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=5, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=6, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=7, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=8, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=9, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=10, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=11, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=12, Desired PMFSHA256=0 [PMF]Set_PMFSHA256_Proc:: apidx=13, Desired PMFSHA256=0 ReadMboParameterFromFile::(bMboEnable[0]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[1]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[2]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[3]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[4]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[5]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[6]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[7]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[8]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[9]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[10]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[11]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[12]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[13]=1, MboCapIndication = 0x40) ReadMboParameterFromFile::(bMboEnable[0]=1) ReadMboParameterFromFile::(bMboEnable[1]=1) MAP_MODE=3 ApCliEntry[0].Enable=0 ApCliEntry[1].Enable=0 IGMP deny list [0]-th entry =224.0.0.1 IGMP deny list [1]-th entry =224.0.0.2 IGMP deny list [2]-th entry =224.0.0.4 IGMP deny list [3]-th entry =224.0.0.5 IGMP deny list [4]-th entry =224.0.0.6 IGMP deny list [5]-th entry =224.0.0.7 IGMP deny list [6]-th entry =224.0.0.8 IGMP deny list [7]-th entry =224.0.0.9 IGMP deny list [8]-th entry =224.0.0.12 IGMP deny list [9]-th entry =224.0.0.16 IGMP deny list [10]-th entry =224.0.0.17 IGMP deny list [11]-th entry =224.0.0.22 IGMP deny list [12]-th entry =224.0.0.251 IGMP deny list [13]-th entry =224.0.0.252 IGMP deny list [14]-th entry =232.0.0.100 IGMP deny list [15]-th entry =239.255.12.42 IGMP deny list [16]-th entry =239.255.255.250 rtmp_read_wds_from_file(): WDS Profile WDS Number: band[0]=0, band[1]=0 WDS-Enable mode=0 WDS-Enable mode=0 HT_BAWinSize: wdev[0]: (TX=256, RX=256) HT_BAWinSize: wdev[1]: (TX=256, RX=256) HT_BAWinSize: wdev[2]: (TX=256, RX=256) HT_BAWinSize: wdev[3]: (TX=256, RX=256) HT_BAWinSize: wdev[4]: (TX=256, RX=256) HT_BAWinSize: wdev[5]: (TX=256, RX=256) HT_BAWinSize: wdev[6]: (TX=256, RX=256) HT_BAWinSize: wdev[7]: (TX=256, RX=256) HT_BAWinSize: wdev[8]: (TX=256, RX=256) HT_BAWinSize: wdev[9]: (TX=256, RX=256) HT_BAWinSize: wdev[10]: (TX=256, RX=256) HT_BAWinSize: wdev[11]: (TX=256, RX=256) HT_BAWinSize: wdev[12]: (TX=256, RX=256) HT_BAWinSize: wdev[13]: (TX=256, RX=256) HT: WDEV[0] Ext Channel = BELOW HT: WDEV[1] Ext Channel = BELOW HT: WDEV[2] Ext Channel = BELOW HT: WDEV[3] Ext Channel = BELOW HT: WDEV[4] Ext Channel = BELOW HT: WDEV[5] Ext Channel = BELOW HT: WDEV[6] Ext Channel = BELOW HT: WDEV[7] Ext Channel = BELOW HT: WDEV[8] Ext Channel = BELOW HT: WDEV[9] Ext Channel = BELOW HT: WDEV[a] Ext Channel = BELOW HT: WDEV[b] Ext Channel = BELOW HT: WDEV[c] Ext Channel = BELOW HT: WDEV[d] Ext Channel = BELOW 0:ra0 TWTsupport = 0 1:(null) TWTsupport = 0 2:(null) TWTsupport = 0 3:(null) TWTsupport = 0 4:(null) TWTsupport = 0 5:(null) TWTsupport = 0 6:(null) TWTsupport = 0 7:(null) TWTsupport = 0 8:(null) TWTsupport = 0 9:(null) TWTsupport = 0 10:(null) TWTsupport = 0 11:(null) TWTsupport = 0 12:(null) TWTsupport = 0 13:(null) TWTsupport = 0 rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect rtmp_read_wsc_user_parms: input parameter[WscDeviceName = AX1800 Dual Band Wi-Fi 6 GPON Router XX230v] incorrect pAd->reg_domain = 1 WtcSetMaxStaNum: MaxStaNum:224, BssidNum:14, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:273 Top Init Done! Use dev_alloc_skb token_tx_queue_init(): ct sw token number = 1023 token_tx_queue_init(): token que inited done!id_head/tail=0/1024 token_tx_queue_init(): c9663004,c9663004 token_rx_init(): alloc mem for glb_var_wifi_rx_q_token_idx1. size:64*15360=983040 TxRing[0]: attr:0, total 2048 entry initialized TxRing[1]: attr:0, total 2048 entry initialized DriverModel=1 !!!! do phy and virtual address mapping dramBaEntry_pa=86e00000 PCIE Port0 link down [C0][NPU] npu_set_pcie_base, addr=200d4500, band_idx=0 [C0][npu_set_pcie_base] 2.4G pcieBase 200d4500 mem_base 200d4500, hw_rx_desc=0 PCIE Port1 link up [C0][NPU] npu_set_pcie_base, addr=200d4510, band_idx=1 [C0][npu_set_pcie_base] 5G pcieBase 200d4510 mem_base 200d4510, hw_rx_desc=0 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7915D_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:0 [C0][NPU] Enter(2.4G) npu_npu_init_rxd, band_idx=0, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020 AllocSize 6000 AllocVa d5ce2020, .AllocPa 1e806020 [C0][NPU] npu_init... [C0]======================= [C0]NPU Version: MT7915D_NPU_V1.001.testv2 [C0]======================= [C0]Support NPU Wifi ffload [C0][NPU] pkt_queue_init... [C0]counter_init:1 [C0][NPU] Enter npu_npu_init_rxd_5G, band_idx=1, rx_ring_size=1536 WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000 AllocSize 6000 AllocVa d5ce6000, .AllocPa 1e800000 RX[2] DESC d1042000 size = 8192 RX[3] DESC d1045000 size = 16384 RX[4] DESC d104a000 size = 8192 register rx data done task cc613154 =====>register 2G hostdapt_registe_wifitask 0 =====>register 5G hostdapt_registe_wifitask 1 -->TX_RING_0[0xd7300]: Attr:0, Base=0x8c620000, Cnt=2048! -->TX_RING_1[0xd7310]: Attr:0, Base=0x8c628000, Cnt=2048! -->TX_RING_2[0xd5400]: Attr:3, Base=0x8c616000, Cnt=128! -->TX_RING_3[0xd5410]: Attr:2, Base=0x8c617000, Cnt=256! -->TX_RING_4[0xd5440]: Attr:1, Base=0x8c618000, Cnt=256! -->RX_RING_0[0xd4500]: Base=0x1e806020, Cnt=1536 -->RX_RING_1[0xd4510]: Base=0x1e800000, Cnt=1536 -->RX_RING_2[0xd5500]: Base=0x8c638000, Cnt=512 -->RX_RING_3[0xd7410]: Base=0x8c78c000, Cnt=1024 -->RX_RING_4[0xd5520]: Base=0x8bda8000, Cnt=512 wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 Hif Init Done! pci_driver_own_by_port: success to clear p=0 fw own, from(1): 1 is interrupt mode, 2 is polling mode. driver_own: port=1 is not enabled fw_prepare():using E2 ROM patch fw_prepare():using E2 RAM Parsing patch header Built date: 20230828104359a Platform: ALPS HW/SW version: 0x8a108a10 Patch version: 0xffffffff Section num: 0x2, subsys: 0x4 Section 0: type = 0x30002, offset = 0xe0, size = 0xfc90 Target address: 0x200000, length: 0xfc90 Section 1: type = 0x30002, offset = 0xfd70, size = 0x13730 Target address: 0xe000f000, length: 0x13730 Patch SEM Status = 2 [ read_dpatch is not ready && get semaphore success Start address = 0x200000, DL length = 64656, Data mode = 0x80000000 hcpc_config ] EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) 128: Start address = 0xe000f000, DL length = 79664, Data mode = 0x80000000 error, unableEventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) to oMtCmdPatchFinishReq pen config file: /var/tmp/dconf/udhcpc.confEventGenericEventHandler: CMD Success Patch SEM Status = 3 release patch semaphore  WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0  Parsing CPU 0 fw tailer Chip ID: 0x0b Eco version: 0x01 Region number: 0x07 Format version: 0x02 Format flag: 0x01 Ram version: ____000000 Built date: 20230828104432 Common crc: 0x68378479 Parsing tailer region 0 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x21fc00 Download size: 110592 Feature set: 0x20 Parsing tailer region 1 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x31dc00 Download size: 205824 Feature set: 0x00 Parsing tailer region 2 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x417400 Download size: 31744 Feature set: 0x00 Parsing tailer region 3 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0022800 Download size: 411136 Feature set: 0x00 Parsing tailer region 4 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0086e00 Download size: 332288 Feature set: 0x00 Parsing tailer region 5 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x23ac00 Download size: 87040 Feature set: 0x00 Parsing tailer region 6 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x400000 Download size: 81920 Feature set: 0x00 Release info: header tag = 0, total length = 64 tag 1, padding length = 2, tag length = 58 payload: t-neptune-mp-mt7915-2045-MT7915_MP_7_4_2045-20230828103801 Start address = 0x21fc00, DL length = 110592, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x31dc00, DL length = 205824, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x417400, DL length = 31744, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0022800, DL length = 411136, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0086e00, DL length = 332288, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x23ac00, DL length = 87040, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x400000, DL length = 81920, Data mode = 0x80000000 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 0x1, address = 0x21fc00 EventGenericEventHandler: CMD Success Parsing CPU 1 fw tailer Chip ID: 0x00 Eco version: 0x01 Region number: 0x03 Format version: 0x02 Format flag: 0x01 Ram version: DEV_000000 Built date: 20230828104451 Common crc: 0x6c78177a Parsing tailer region 0 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x10200000 Download size: 90032 Feature set: 0x00 Parsing tailer region 1 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0x10300000 Download size: 16592 Feature set: 0x00 Parsing tailer region 2 Decomp crc: 0x0 Decomp size: 0x0 Decomp block size: 0x0 Target address: 0xe0000000 Download size: 7648 Feature set: 0x00 Release info: header tag = 0, total length = 0 Start address = 0x10200000, DL length = 90032, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0x10300000, DL length = 16592, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) Start address = 0xe0000000, DL length = 7648, Data mode = 0x80000010 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 0x4, address = 0x0 EventGenericEventHandler: CMD Success :MtCmdCr4Capability: option(0) MCU Init Done! efuse_probe: efuse = 10000012 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0] rtmp_nv_init(): EEPROM Size[3584] flash_read(): read from address:0x120000, len:0xe00! [EEPROMImage - PreCalImageInfo - PreCalImage - TxDPDImage] [0xca2a8000 - 0xca2a8e00 - 0xca2a8e10 - 0xca2b5220] validFlashEepromID(): eeFlashId=7915, pAd->ChipID=7915 [d-die version:1] [a-die version:2] NICReadEEPROMParameters: EEPROM 0x62 0 [36.529][ntpc] 789 - ERROR: open DNS error NTP server list: now bb MainSsid mac d8:44:89:bd:cf:d8 Country Region from e2p = 0 antenna_default_reset() todo antenna_default_reset() value = 0x5292, TxPath = 2, RxPath = 2 RTMPReadTxPwrPerRate(458): Don't Support this now! rc_radio_init(): DBDC MODE=1, ConcurrentBand=2 rc_radio_init(): radio_ctrl=cc609700,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf rc_radio_init(): radio_ctrl=cc609a58,Band=1,rfcap=3,channel=1,PhyMode=2 extCha=0xf ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 AntCfgInit(2918): Not support for HIF_MT yet! MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku_5g.dat mt7915_check_RF_lock_down: RFlockDown Enable: 0 MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku-bf_2g.dat MtReadPwrLimitTable: RF_LOCKDOWN Feature OFF !!! MtReadPwrLimitTable: SKU Path: /var/Wireless/RT2860AP/mt7915-sku-bf_5g.dat mt7915_check_RF_lock_down: RFlockDown Enable: 0 EEPROM Init Done! mac_init()--> init_mac_cr()--> <--mac_init() CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 MAC Init Done! BBPInit():BBP Initialization..... Band 0: valid=1, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2 Band 1: valid=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0 BBPInit() todo PHY Init Done! ch_switch_monitor_state_machine_init:: enter ch_switch_monitor_cfg_reset:: enter ch_switch_monitor_cfg_reset:: enter tx_pwr_comp_init():NotSupportYet! Set_SCSDefaultEnable(): BandIdx=0, SCSEnable=1 Set_SCSDefaultEnable(): BandIdx=1, SCSEnable=1 led_send_fw_cmd: 0205000000240000 led_0 map to gpio_18... led_send_fw_cmd: 0205010000340000 led_1 map to gpio_26... MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) ap_ftkd> Initialize FT KDP Module... Main bssid = 00:00:00:00:00:00 SetMuruPlatformTypeProc: param.ucPlatformType = 2 muru_cfg_dlul_limits:(Ret = 1 muru_cfg_dlul_limits:(Ret = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) <==== mt_wifi_init, Status=0 CmdHeraStbcPriorityCtrl: u1BandIdx=0, u1Operation=1, u1StbcPriority=0 CmdHeraStbcPriorityCtrl: u1BandIdx=1, u1Operation=1, u1StbcPriority=0 Register MBSSID IF 1 (ra1) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(1) Register MBSSID IF 2 (ra2) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(2) Register MBSSID IF 3 (ra3) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(3) Register MBSSID IF 4 (ra4) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(4) Register MBSSID IF 5 (ra5) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(5) Register MBSSID IF 6 (ra6) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(6) Register MBSSID IF 7 (rai0) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(7) Register MBSSID IF 8 (rai1) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(8) Register MBSSID IF 9 (rai2) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(9) Register MBSSID IF 10 (rai3) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(10) Register MBSSID IF 11 (rai4) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(11) Register MBSSID IF 12 (rai5) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(12) Register MBSSID IF 13 (rai6) wdev_init(caller:mbss_create_vif+0x194/0x4a4), wdev(13) MSTA_Init (2) ---> ApCli Register MSTA IF (apcli0) , pAd->MSTANum = 1 wdev_init(caller:MSTA_Init+0x200/0x650), wdev(14) Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=0, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 Register MSTA IF (apclii0) , pAd->MSTANum = 2 wdev_init(caller:MSTA_Init+0x200/0x650), wdev(15) Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=0, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 mt_service_init: wlan service inits successfully! WtcSetMaxStaNum: MaxStaNum:222, BssidNum:14, WdsNum:16, MSTANum:2, MaxNumChipRept:32, MinMcastWcid:272 RedInit: set CR4/N9 RED Enable to 1. RedInit: RED Initiailize Done. cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2. ==ecnt_wifi_rx_rps_hook=== RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 0 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 BuildChannelList() BandIdx = 0, PhyMode = 78, ChListNum = 13: phy_oper_init(): operate TxStream = 2, RxStream = 2 phy_freq_adjust : no prim_ch value for adjust! Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=0, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=0 AP inf up for ra_0(func_idx) OmacIdx=0 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x110/0x464)!! mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=1, ctrl_ch2=0, cent_ch=1 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=1, ctrl_ch2=0, cent_ch=1, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) EnableNF: mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=6, ctrl_ch2=0, cent_ch=6, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) Average Power WF0 WF1 WF2 WF3 -128 -128 -128 -128 mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=7, ctrl_ch2=0, cent_ch=7, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=8, ctrl_ch2=0, cent_ch=8, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) EnableNF: mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=9, ctrl_ch2=0, cent_ch=9, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) [44.539][cmm] 648: create dropbear RSA key success. [44.539][cmm] 655: start creating dropbear DSS key at CPU core 1. [44.540][cmm] 659: Try create dropbear DSS key loop=0 ... Generating 1024 bit dss key, this may take a while... mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=10, ctrl_ch2=0, cent_ch=10, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=11, ctrl_ch2=0, cent_ch=11, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) UpdateBeaconHandler, wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2c8/0x464)!! ==================================================================== Channel 1 : Busy Time = 3831, Skip Channel = FALSE, BwCap = TRUE Channel 2 : Busy Time = 1001, Skip Channel = FALSE, BwCap = TRUE Channel 3 : Busy Time = 446, Skip Channel = FALSE, BwCap = TRUE Channel 4 : Busy Time = 2918, Skip Channel = FALSE, BwCap = TRUE Channel 5 : Busy Time = 5958, Skip Channel = FALSE, BwCap = TRUE Channel 6 : Busy Time = 7791, Skip Channel = FALSE, BwCap = TRUE Channel 7 : Busy Time = 21708, Skip Channel = FALSE, BwCap = TRUE Channel 8 : Busy Time = 12214, Skip Channel = FALSE, BwCap = TRUE Channel 9 : Busy Time = 9585, Skip Channel = FALSE, BwCap = TRUE Channel 10 : Busy Time = 8393, Skip Channel = FALSE, BwCap = TRUE Channel 11 : Busy Time = 4031, Skip Channel = FALSE, BwCap = TRUE ==================================================================== Rule 3 Channel Busy time value : Select Primary Channel 3 Rule 3 Channel Busy time value : Min Channel Busy = 446 Rule 3 Channel Busy time value : BW = 20 [SelectClearChannelBusyTime] - band0 END ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 3, IsAband = 0 mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=1, TXStream=2, RXStream=2, scan(0) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=1,TXStream=2, RXStream=3, scan(0) zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0 ApAutoChannelAtBootUp<----------------- ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:0, CfgMode:177 [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(0) wifi_sys_linkup, wdev idx = 0 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[0]=0 wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_up: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) Band0 BcnInitedRnd = 32 MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 0 for WscUUIDInit Generate UUID for apidx(0) WDS_Init(): wds_num(0) should be 4 of 2.4G WDS_Init(): wds_num(0) should be 4 of 5G WDS_Init():wds_num[0]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0 Total allocated 0 WDS(es) for band0! ra4: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 4 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=4 AP inf up for ra_4(func_idx) OmacIdx=17 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:4, CfgMode:177 [PMF]APPMFInit:: apidx=4, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(4) wifi_sys_linkup, wdev idx = 4 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[4]=4 wifi_sys_linkup:wdev(type=4,func_idx=1,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_up: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 4 for WscUUIDInit Generate UUID for apidx(4) ra5: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 5 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=5 AP inf up for ra_5(func_idx) OmacIdx=18 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:5, CfgMode:177 [PMF]APPMFInit:: apidx=5, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(5) wifi_sys_linkup, wdev idx = 5 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[5]=5 wifi_sys_linkup:wdev(type=5,func_idx=1,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_up: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 5 for WscUUIDInit Generate UUID for apidx(5) Set_Map_Proc current MAP MODE is 3 Set_MapR2_Proc: MAP R2 is enabled Set_Bh_Bss_Proc ra0 bandIdx = 0 ,DevOwnRole 0x20 Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20 Set_Fh_Bss_Proc ra4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra4 bandIdx = 0 ,DevOwnRole 0x44 Set_Fh_Bss_Proc ra5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc ra5 bandIdx = 0 ,DevOwnRole 0x48 rt28xx_ap_ioctl interface[ra6](index[6]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[ra6](index[6]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down [46.595][cmm] 236 - ERROR: Get map shared buffer error. [46.595][cmm] 1156 - ERROR: Failed to attach map shared memory buffer. [46.596][cmm] 14353 - ERROR: There are no APDevices saved in map shared memory. [46.596][cmm] 17243 - ERROR: Can not find Controller cfg_mode=16 cfg_mode=16 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 BuildChannelList() BandIdx = 0, PhyMode = 78, ChListNum = 13: Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=1, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=2, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=3, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=6, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=14, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 [46.997][cmm] 671: create dropbear DSS key success. [46.997][cmm] 680: parent pid 860 [46.998][cmm] 688: parent pre cpu mask 00000001 [46.998][cmm] 702: parent post cpu mask 00000003 SetEDCCAEnableCtrl: BandIdx = 0 set_vow_airtime_fairness_en: set 0. set_vow_dwrr_max_wait_time: set 1. SetPercentageCtrl: ucBandIdx = 0 SetPercentageCtrl: TxPowerPercentEn = 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0 SetPowerDropCtrl: ucPowerDrop = 100 sync for : ra0 sync for : ra4 sync for : ra5 Set_FragThreshold_Proc::set wdev0 FragThreshold=2346) Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 device ra5 entered promiscuous mode br0: port 5(ra5) entered forwarding state br0: port 5(ra5) entered forwarding state device ra4 entered promiscuous mode br0: port 6(ra4) entered forwarding state br0: port 6(ra4) entered forwarding state can't add ra3 to bridge br0: Invalid argument can't add ra2 to bridge br0: Invalid argument can't add ra1 to bridge br0: Invalid argument device ra0 entered promiscuous mode br0: port 7(ra0) entered forwarding state br0: port 7(ra0) entered forwarding state device apcli0 entered promiscuous mode [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 0 wifi_sys_linkdown:wdev(type=1,func_idx=0,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_down: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wmm_ctrl_release_entry(): Can't find HdevObj or Edca not required wifi_sys_close, wdev idx = 0 hw_ctrl_flow_v2_close: wdev_idx=0 wifi_sys_open(), wdev idx = 0 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=0 wifi_sys_linkup, wdev idx = 0 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[0]=0 wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0) hw_ctrl_flow_v2_link_up: wdev_idx=0 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 ap_over_lapping_scan(), pAd->CommonCfg.bForty_Mhz_Intolerant:0, pAd->CommonCfg.bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 [PMF]APPMFInit:: apidx=4, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 4 wifi_sys_linkdown:wdev(type=1,func_idx=4,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_down: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 4 hw_ctrl_flow_v2_close: wdev_idx=4 wifi_sys_open(), wdev idx = 4 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=4 wifi_sys_linkup, wdev idx = 4 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:286 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[4]=4 wifi_sys_linkup:wdev(type=4,func_idx=1,wdev_idx=4),BssIndex(1) hw_ctrl_flow_v2_link_up: wdev_idx=4 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 restart_ap, mbss_idx:4, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 [PMF]APPMFInit:: apidx=5, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 5 wifi_sys_linkdown:wdev(type=1,func_idx=5,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_down: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 5 hw_ctrl_flow_v2_close: wdev_idx=5 wifi_sys_open(), wdev idx = 5 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=5 wifi_sys_linkup, wdev idx = 5 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:285 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band0 group_idx[5]=5 wifi_sys_linkup:wdev(type=5,func_idx=1,wdev_idx=5),BssIndex(2) hw_ctrl_flow_v2_link_up: wdev_idx=5 (bssUpdateChannel), ucPrimCh=3, ucCentChSeg0=5, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 restart_ap, mbss_idx:5, BandIdx:0, reuse FallBack=0, bBssCoexEnable:0 Caller: SetCommonHT+0xb4/0x148 phy_mode=78, ch=3, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! WLAN-Start wlNetlinkTool Interface doesn't accept private ioctl... set (8BE2): Network is down Waiting for Wireless Events from interfaces... swWlanChkAhbErr: netlink to do SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 0 MtCmdThermalProtectDutyCfg: duty: 100 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 80 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 1 MtCmdThermalProtectDutyCfg: duty: 80 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 60 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 2 MtCmdThermalProtectDutyCfg: duty: 60 SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 20 MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 3 MtCmdThermalProtectDutyCfg: duty: 20 SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 5 MtCmdThermalProtectEnable: band_idx: 0, protect_type: 1 MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 120 MtCmdThermalProtectEnable: restore_temp: 114, recheck_time: 5 rai0: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 7 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 BuildChannelList() BandIdx = 1, PhyMode = 177, ChListNum = 9: DfsBuildChannelList(): Done phy_oper_init(): operate TxStream = 2, RxStream = 2  [RadarStateCheck] RD_NORMAL_MODE  phy_freq_adjust : no prim_ch value for adjust! Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=0, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=7 AP inf up for ra_7(func_idx) OmacIdx=0 AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0) [AutoChSelBuildChannelListFor5G] ChListNum5G = 9 UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x110/0x464)!! mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=36, ctrl_ch2=0, cent_ch=36 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=36, ctrl_ch2=0, cent_ch=36, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=40, ctrl_ch2=0, cent_ch=40 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=40, ctrl_ch2=0, cent_ch=40, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=44, ctrl_ch2=0, cent_ch=44, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=48, ctrl_ch2=0, cent_ch=48 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=48, ctrl_ch2=0, cent_ch=48, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=149, ctrl_ch2=0, cent_ch=149 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=149, ctrl_ch2=0, cent_ch=149, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=153, ctrl_ch2=0, cent_ch=153 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=153, ctrl_ch2=0, cent_ch=153, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=157, ctrl_ch2=0, cent_ch=157 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=157, ctrl_ch2=0, cent_ch=157, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=161, ctrl_ch2=0, cent_ch=161 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=161, ctrl_ch2=0, cent_ch=161, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) UpdateBeaconHandler, wdev(7) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2c8/0x464)!! ==================================================================== Channel 36 : Busy Time = 1323, Skip Channel = FALSE, BwCap = TRUE Channel 40 : Busy Time = 54, Skip Channel = FALSE, BwCap = TRUE Channel 44 : Busy Time = 4, Skip Channel = FALSE, BwCap = TRUE Channel 48 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE Channel 149 : Busy Time = 170, Skip Channel = FALSE, BwCap = TRUE Channel 153 : Busy Time = 606, Skip Channel = FALSE, BwCap = TRUE Channel 157 : Busy Time = 2163, Skip Channel = FALSE, BwCap = TRUE Channel 161 : Busy Time = 399, Skip Channel = FALSE, BwCap = TRUE ==================================================================== Rule 3 Channel Busy time value : Select Primary Channel 48 Rule 3 Channel Busy time value : Min Channel Busy = 1323 Rule 3 Channel Busy time value : BW = 80 [SelectClearChannelBusyTime] - band1 END ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 48, IsAband = 1  [RadarStateCheck] RD_NORMAL_MODE  mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal MtCmdChannelSwitch: ctrl_chl=48, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=2, RXStream=2, scan(0) sh: /usr/script/usbhost_load.sh: not found MtCmdSetTxRxPath: ctrl_chl=48, ctrl_ch2=0, cent_ch=42, RxPath=3, BandIdx=1, ChBand=1, BW=2,TXStream=2, RXStream=3, scan(0) DfsBuildChannelList(): Done zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0 ApAutoChannelAtBootUp<----------------- ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:7, CfgMode:78 [PMF]APPMFInit:: apidx=7, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(7) wifi_sys_linkup, wdev idx = 7 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:284 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[7]=7 wifi_sys_linkup:wdev(type=7,func_idx=1,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_up: wdev_idx=7 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) Band1 BcnInitedRnd = 88 MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 7 for WscUUIDInit Generate UUID for apidx(7) WDS_Init(): wds_num(1) should be 4 of 2.4G WDS_Init(): wds_num(1) should be 4 of 5G WDS_Init():wds_num[1]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0 Total allocated 0 WDS(es) for band1! rai4: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 11 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=11 AP inf up for ra_b(func_idx) OmacIdx=17 AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:11, CfgMode:78 [PMF]APPMFInit:: apidx=11, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(11) wifi_sys_linkup, wdev idx = 11 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:283 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[11]=11 wifi_sys_linkup:wdev(type=11,func_idx=1,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_up: wdev_idx=11 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 11 for WscUUIDInit Generate UUID for apidx(11) rai5: ===> mbss_virtual_if_open RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP wifi_sys_open(), wdev idx = 12 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=12 AP inf up for ra_c(func_idx) OmacIdx=18 AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn mt7915 mtk_band_steering_netlink_init 243 band steering netlink init ok ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup[1] = 1 MtCmdSetMacTxRx:(ret = 0) MtCmdSetMacTxRx:(ret = 0)  ap_run_at_boot() : ACS is disable !! ===> APStartUpForMbss(caller:ap_inf_open+0x130/0x234), mbss_idx:12, CfgMode:78 [PMF]APPMFInit:: apidx=12, MFPC=0, MFPR=0, SHA256=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 ap_link_up(caller:APStartUpForMbss+0x42c/0x658), wdev(12) wifi_sys_linkup, wdev idx = 12 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:282 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[12]=12 wifi_sys_linkup:wdev(type=12,func_idx=1,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_up: wdev_idx=12 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 1 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 set muru_update_he_cfg()!!!! PrintSrCmd: u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 PrintSrCmd: u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 PrintSrCmd: u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 apidx 12 for WscUUIDInit Generate UUID for apidx(12) Set_Map_Proc current MAP MODE is 3 Set_MapR2_Proc MAP R2 is already enabled Set_Bh_Bss_Proc rai0 bandIdx = 1 ,DevOwnRole 0x20 Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x20 Set_Fh_Bss_Proc rai4 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc rai4 bandIdx = 1 ,DevOwnRole 0x44 Set_Fh_Bss_Proc rai5 wdev->MAPCfg.DevOwnRole 0x0 Set_Bh_Bss_Proc rai5 bandIdx = 1 ,DevOwnRole 0x48 rt28xx_ap_ioctl interface[rai6](index[13]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[rai6](index[13]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down [52.111][cmm] 236 - ERROR: Get map shared buffer error. [52.111][cmm] 1156 - ERROR: Failed to attach map shared memory buffer. [52.112][cmm] 14353 - ERROR: There are no APDevices saved in map shared memory. [52.112][cmm] 17243 - ERROR: Can not find Controller cfg_mode=17 cfg_mode=17 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 BuildChannelList() BandIdx = 1, PhyMode = 177, ChListNum = 9: DfsBuildChannelList(): Done Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=8, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=9, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=10, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hc_radio_res_request(): wdev=13, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=0,ch_width=1,gf=0,sgi20=0,sgi40=0,tx_stbc=0,rx_stbc=0,amsdu_size=0 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=0 hc_radio_res_request(): wdev=15, hobj is not ready! Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=2 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=0, ampdu_factor=3 hc_radio_res_request(): wdev=8, hobj is not ready! hc_radio_res_request(): wdev=9, hobj is not ready! hc_radio_res_request(): wdev=10, hobj is not ready! hc_radio_res_request(): wdev=13, hobj is not ready! hc_radio_res_request(): wdev=15, hobj is not ready! set_vow_airtime_fairness_en: set 0. set_vow_dwrr_max_wait_time: set 1. SetPercentageCtrl: ucBandIdx = 1 SetPercentageCtrl: TxPowerPercentEn = 1 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 1 SetPowerDropCtrl: ucPowerDrop = 100 sync for : ra0 sync for : ra4 sync for : ra5 sync for : rai0 sync for : rai4 sync for : rai5 Set_FragThreshold_Proc::set wdev7 FragThreshold=2346) Caller: SetCommonHT+0xb4/0x148 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 device rai5 entered promiscuous mode br0: port 9(rai5) entered forwarding state br0: port 9(rai5) entered forwarding state device rai4 entered promiscuous mode br0: port 10(rai4) entered forwarding state br0: port 10(rai4) entered forwarding state can't add rai3 to bridge br0: Invalid argument can't add rai2 to bridge br0: Invalid argument can't add rai1 to bridge br0: Invalid argument device rai0 entered promiscuous mode br0: port 11(rai0) entered forwarding state br0: port 11(rai0) entered forwarding state device apclii0 entered promiscuous mode [PMF]APPMFInit:: apidx=7, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 7 wifi_sys_linkdown:wdev(type=1,func_idx=7,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_down: wdev_idx=7 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wmm_ctrl_release_entry(): Can't find HdevObj or Edca not required wifi_sys_close, wdev idx = 7 hw_ctrl_flow_v2_close: wdev_idx=7 wifi_sys_open(), wdev idx = 7 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=7 wifi_sys_linkup, wdev idx = 7 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:284 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[7]=7 wifi_sys_linkup:wdev(type=7,func_idx=1,wdev_idx=7),BssIndex(3) hw_ctrl_flow_v2_link_up: wdev_idx=7 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [PMF]APPMFInit:: apidx=11, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 11 wifi_sys_linkdown:wdev(type=1,func_idx=11,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_down: wdev_idx=11 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 11 hw_ctrl_flow_v2_close: wdev_idx=11 wifi_sys_open(), wdev idx = 11 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=11 wifi_sys_linkup, wdev idx = 11 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:283 for WDEV_TYPE:1 LinkToOmacIdx = 11, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[11]=11 wifi_sys_linkup:wdev(type=11,func_idx=1,wdev_idx=11),BssIndex(4) hw_ctrl_flow_v2_link_up: wdev_idx=11 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 11 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [PMF]APPMFInit:: apidx=12, MFPC=0, MFPR=0, SHA256=0 wifi_sys_linkdown(), wdev idx = 12 ExtEventBeaconLostHandler::FW EVENT (da:44:89:cd:cf:d8), Reason 0x10 AP Beacon OFF!!! wifi_sys_linkdown:wdev(type=1,func_idx=12,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_down: wdev_idx=12 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0 wifi_sys_close, wdev idx = 12 hw_ctrl_flow_v2_close: wdev_idx=12 wifi_sys_open(), wdev idx = 12 ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0 ucAction = 0, ucBandIdx = 1, ucSmthIntlBypass = 0 phy_oper_init(): operate TxStream = 2, RxStream = 2 Caller: wlan_operate_init+0xbc/0x118 phy_mode=177, ch=48, wdev_type=1 ht_cap: ht_cap->HtCapInfo, ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 ht_cap: ht_cap->HtCapParm, mdpu_density=5, ampdu_factor=3 hw_ctrl_flow_v2_open: wdev_idx=12 wifi_sys_linkup, wdev idx = 12 wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:282 for WDEV_TYPE:1 LinkToOmacIdx = 12, LinkToWdevType = 1 TRTableInsertMcastEntry:band1 group_idx[12]=12 wifi_sys_linkup:wdev(type=12,func_idx=1,wdev_idx=12),BssIndex(5) hw_ctrl_flow_v2_link_up: wdev_idx=12 (bssUpdateChannel), ucPrimCh=48, ucCentChSeg0=42, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag StaRecUpdateWtbl: u2Tag=21,u2Length=8,ucEnVlan2Eth=1 UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 12 (ra0) bcn_buf_init():BcnPkt is allocated!, bcn offload=1 [53.616][cmm] 9189 - ERROR: wlNetlinkTool is already there. rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! Interface doesn't accept private ioctl... set (8BE2): Network is down sh: can't open '/etc/smp.sh' SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 0, duty: 100 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 0 MtCmdThermalProtectDutyCfg: duty: 100 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 1, duty: 80 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 1 MtCmdThermalProtectDutyCfg: duty: 80 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 2, duty: 60 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 2 MtCmdThermalProtectDutyCfg: duty: 60 SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 3, duty: 20 MtCmdThermalProtectDutyCfg: band_idx: 1, level_idx: 3 MtCmdThermalProtectDutyCfg: duty: 20 SetThermalProtectEnable(): band_idx: 1, protection_type: 1, trigger_type: 1 SetThermalProtectEnable(): trigger_temp: 120, restore_temp: 114, recheck_time: 5 MtCmdThermalProtectEnable: band_idx: 1, protect_type: 1 MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 120 MtCmdThermalProtectEnable: restore_temp: 114, recheck_time: 5 [53.792][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra1/brport/bridge/ifindex [53.794][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai1/brport/bridge/ifindex [53.796][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra2/brport/bridge/ifindex [53.798][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/ra3/brport/bridge/ifindex [53.799][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai2/brport/bridge/ifindex [53.801][cmm] 141 - ERROR: Stat sysfs for br port bridge ifindex failed, path: /sys/class/net/rai3/brport/bridge/ifindex rm: can't remove '/var/tmp/os_print/tpApp/2_debug': No such file or directory [54.021][cmm] 794: Skip create dropbear RSA key here [54.022][cmm] 822: Skip create dropbear DSS key here [2167] Mar 19 03:00:53 Running in background [Mar 19 00:00:53] radvd: poll error: Interrupted system call [Mar 19 00:00:53] radvd: poll error: Interrupted system call ip6tables: No chain/target/match by that name. iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky insmod: can't insert '/lib/modules/kmdir/kernel/drivers/net/ppp/ppp_mppe.ko': No such file or directory ioctl set error: Inappropriate ioctl for device [54.925][cmm] 586 - ERROR: Gpon sn str:54Password: 504C4789BDCFD8 [54.925][cmm] 587 - endor: 0x54504c47 mERROR: Gpon pwd str: [54.925][cmm] 588 - ERROR: Gpon sn type:1 [54.925][cmm] 589 - ERROR: Gpon pwd type:0 api_set_sn_auth_info(564): passwd:(); api_set_sn_auth_info(637): snIUint32[0] = 0x54504c47, snIUint32[1] = 0x89bdcfd8, [2024-3-19 Tue 00:00:54.320363][TP_omciMibReset][6430]:set OMCI machine in TP_omciMibReset api_renegotiate(780):api_renegotiate after MIB reset api_set_ctc_auth_info(649): -- not implemented, to do here! -- [55.009][cmm] 1177 - ERROR: Init loid tplink passwd tplink [55.085][cmm] 133 - ERROR: Cann't open file: /var/run/zebra.pid. [55.116][cmm] 133 - ERROR: Cann't open file: /var/run/ripd.pid. [55.117][cmm] 133 - ERROR: Cann't open file: /var/run/ripngd.pid. iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). nf_conntrack_rtsp v0.7 loading nf_nat_rtsp v0.7 loading k_domain: tplinkmodem.net ip6tables: Too many links. [55.376][httpd] 1057 - ERROR: u_domain: tplinkmodem.net iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). [ rsl_initIqosObj ] 1248: 0#0,0,0,0 [56.319][cmm] 5449 - ERROR: Device.X_TP_Services.X_TP_VoiceService.{i}.PhyInterface.{i}. exit. skip create instance. writing RSA key killall: minidlnad: no process killed killall: vsftpd: no process killed [59.216][cmm] 1034 - ERROR: Can not find the sftp config file: /var/tmp/dconf/sftpcfg iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). [59.362][cmm] 1034 - ERROR: Can not find the sftp config file: /var/tmp/dconf/sftpcfg [2024/03/19 00:00:58] getifaddr.c:334: runtime_vars.ifaces[0]=br0 [2712] Mar 19 00:00:58 Failed listening on '22': Error listening: Address already in use Dropbear init failed, cos will restart it. [2712] Mar 19 00:00:58 Early exit: No listening ports available. [59.537][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.538][cmm] 1653 - ERROR: ret=9007 [59.538][cmm] 707 - ERROR: ret=9007 [59.539][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.539][cmm] 1653 - ERROR: ret=9007 [59.540][cmm] 707 - ERROR: ret=9007 [59.541][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.541][httpd] 529 - ERROR: Unknown page: /main/advanceLte.htm, skip it [59.541][cmm] 1653 Set_MapTS_Proc MAP TS is already disabled - ERROR: ret=9007 [59.541][httpd] 529 - ERROR: Unknown page: /main/sfpWan.htm, skip it [59.542][cmm] 707 - ERROR: ret=9007 [59.542][httpSet_MapTS_Proc MAP TS is already disabled d] 529 - ERROR: Unknown page: /main/sfpWanEdit.htm, skip it ++++++++++we are going to init cloud+++++++++++++++++ [59.590][cmm] 4364 - ERROR: mesh enable is 1,Set_Map_Bh_Primary_Vid_Proc: ra5 default vid=4095 ts enable is 0 [59.590][cmm] 3710 - ERROR: traffic separation is disabled mmmInit():Total mem size=51364, addr=0x0x499008. *************rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! ************************************************ ************************Set_Map_Fh_Vid_Proc: ra0 fh vid=4095 *MMM TABLE DUMP********************** ----------------------------------Set_Map_Bh_Primary_Vid_Proc: rai5 default vid=4095 --------------------------- poolheadrt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! (40) poolnum dynamictimes chainhead poolend ---------------------et_Map_Fh_Vid_Proc: rai0 fh vid=4095 ---------------------------------------- 0x499008 8 0 (nil) StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag ra0 0x4a58ac ----------------------------------------------------------rt28xx_ap_ioctl interface[apcli0](index[14]) is down, cmd [8be2] return!!! --- index poolhead(20) size blocks free usage ------------------------------------------------------------- 1 0x499030 32 StaRecUpdateTxProc(), set u4TxProcFlag = 0 to keep vlan tag ra0 256 256 0 2 0x49b448 64 12rt28xx_ap_ioctl interface[apclii0](index[15]) is down, cmd [8be2] return!!! 8 128 0 3 0x49d660 128 64 64 0 4 0x49f778 256 32 32 0 5 0x4a1810 512 8 8 0 6 0x4a2848 1024 4 4 0 7 0x4a3870 2048 2 2 0 8 0x4a4890 4096 1 1 0 ------------------------------------------------------------- index chainnode(16) magic length prev next ------------------------------------------------------------- (nil) ************************************************************* 1710817258973|2730|4|cloud.c:91:main| - cloud-sdk version: 1.3.9-rc03, build_time:20211227_172322 Interface doesn't accept private ioctl... set (8BE2): Network is down Interface doesn't accept private ioctl... set (8BE2): Network is down Interface doesn't accept private ioctl... set (8BE2): Invalid argument Interface doesn't accept private ioctl... set (8BE2): Network is down Interface doesn't accept private ioctl... set (8BE2): Invalid argument Interface doesn't accept private ioctl... set (8BE2): Network is down ************************************************** ********************config dump******************* -------------------------------------------------- sef domain : n-deventry-gw.tplinkcloud.com sef port : 443 cloud svr default port : 443 default svr : n-devs-gw.tplinkcloud.com default port : 443 default valid time : 172800 heartbeat interval : 235000 request timeout : 5000 reconnect timewait max : 1024000 reconnect cachedsvr max times : 5 reconnect defaultsvr max times : 5 reconnect random time min : 2000 reconnect random time max : 256000 short connect interval : 259200000 max message number : 1000 max client number : 20 service file : /tmp/cloud_service.cfg cer file : /etc/cloud/2048_newroot.cer ssl verify CN : ssl verify time : 0 ************************************************** [59.820][cmm] 1807 - voip modules loaded, timer number 3[0;31mERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.820][cmm] 1653 - ERROR: ret=9007 [59.820][cmm] 707 - ERROR: ret=9007 [59.918][cm fxsGetLine(0)Ret[1]=State[3] m] 180fxsSetLine[0]state 0x9 State UNKNOWN ! 7 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.918][cmm] 1653 - ERROR: ret=9007 [59.918][cmm] 707 - ERRORbr0: port 1(eth0.1) entered disabled state : ret=9007 [59.921][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.921][cmm] 1653 - ERROR: ret=9007 [59.922][cmm] 707 - ERROR: ret=9007 [59.938][cmm] 1807 - ERRORevice eth0.1 left promiscuous mode mbr0: port 1(eth0.1) entered disabled state : The lengh(0) of phone number() is less than 3 or lager than 32. [59.939][cmm] 1653 - ERROR: ret=9007 [59.939][cmm] 707 - ERROR: ret=9007 [59.940][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [59.940][cmm] 1653 - ERROR: ret=9007 [59.940][cmm] 707 - ERROR: ret=9007 [59.942][httpd] 659 - ERROR: Invalid value! [59.943][httpd] 529 - ERROR: Unkbr0: port 2(eth0.2) entered disabled state nown page: /main/operateMode.htm, skip it [59.946][cmm] 1387 - ERROR: --> X_TP_ConnType=Ldevice eth0.2 left promiscuous mode ANbr0: port 2(eth0.2) entered disabled state X_TP_ServiceType=Unknown [59.946][cmm] 1387 - ERROR: --> X_TP_ConnType=PPP3G X_TP_ServiceType=Unknown [59.947][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP4G X_TP_ServiceType=Unknown [59.947][cmm] 1387 - ERROR: --> X_TP_ConnType=DHCP X_TP_ServiceType=Internet sh: can't crebr0: port 3(eth0.3) entered disabled state te /proc/tplink/eth_forward: nonexistent directory *reg=00002104 value:00ff0000 *reg=00002204 value:00ff0000 *reg=00002304 value:00ff0000 *redevice eth0.3 left promiscuous mode g=br0: port 3(eth0.3) entered disabled state 00002404 value:00ff0000 VDSP_GetInstance:292 [GDI] Change log level to (EVA_LOG_ERR). ludewei get the ipv6 addr=:: ludewei get the ipv6 addr=:: ipv6 Via:0 zeroIp:1 zeroIp6:1 ipaddr:0.0.0.0 ip6addr::: [60.156][cutil] 2146 - ERROR: Error ip is 0.0.0.0,:: Sorry, rule does not exist. br0: port 4(eth0.4) entered disabled state Sorry, rule does not exist. device eth0.4 left promiscuous mode br0: port 4(eth0.4) entered disabled state +++ timer 2 start (tick : 2) +++ Sorry, rule does not exist. Sorry, rule does notfxsSetLine[0]state 0x9 State UNKNOWN ! exist. device eth0 entered promiscuous mode Sobr0: port 1(eth0) entered forwarding state br0: port 1(eth0) entered forwarding state rry, rule does not exist. Illegal target name 'ieee1905'. Illegal target name 'ieee1905'. sh: write error: Invalid argument device eth0 left promiscuous mode br0: port 1(eth0) entered disabled state device eth0.1 entered promiscuous mode device eth0.2 entered promiscuous mode br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state device eth0.3 entered promiscuous mode ath_band_steering_netlink_receive 157 pid = 2919 ath_band_steering_netlink_receive 157 pid = 2919 device eth0.4 entered promiscuous mode device eth0.5 is not a slave of br0 ath_band_steering_netlink_receive 157 pid = 2919 g_tx_ctl = 1 ath_band_steering_netlink_receive 157 pid = 2919 sh: write error: Invalid argument [60.756][SharedLib] 123: Map shm size: 291864 bytes [60.757][SharedLib] 85: mac(DA:44:89:BD:CF:D9), cfg_file(/var/tmp/map.conf), is_registrar(1), bMapController(1), mapEnable(1), vlan_enable(0) procName is sigma_dut, keyWord is [60.862][SharedLib] 123: Map shm size: 291864 bytes [60.863][SharedLib] 85: mac(DA:44:89:BD:CF:D8), cfg_file(/var/tmp/map.conf), is_registrar(0), bMapController(0), mapEnable(1), vlan_enable(0) procName is sigma_dut, keyWord is [61.112][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) LoadClientCert: Not using a device certificate for connections topic[/tpuc/tr369controller], response_topic[/tpuc/D84489-Device2-22445J1001433] agentid is :USP::D84489BDCFD8 DM_EXEC_Main start MQTT: [2024-3-19 Tue 00:01:00.510791]OMCI wait for RSL init done Co [2024-3-19 Tue 00:01:00.517011][main][1165]:Enter OMCI State Machine, OMCI_STATE_START! nnect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) [2024-3-19 Tue 00:01:00.586356][omciAddVendorMeToStdMeTable][1199] before DM operation ,totalSize(4) [ omciAddVendorMeToS [2024-3-19 Tue 00:01:00.597907][omciAddVendorMeToStdMeTable][1250] toalTblSize(4) a/b (0) tdMeTable ] [2024-3-19 Tue 00:01:00.607071] initFil1erMeInfo toalTblSize = 3 216: 1#1 [2024-3-19 Tue 00:01:00.613868] enter omciMeInitForCWMPConfigData [ [2024-3-19 Tue 00:01:00.621048] enter omciMeInitForExtendOntG omci [2024-3-19 Tue 00:01:00.627545] enter omciMeInitForExtendOnt2Abi AddVend [2024-3-19 Tue 00:01:00.634577] enter omciMeInitForONTImageMode orMe [2024-3-19 Tue 00:01:00.641229] enter omciMeInitForExtendOnt3Abi ToStd [2024-3-19 Tue 00:01:00.648099] enter omciMeInitForHuaweiProprietary MeTable ] 1220: 2#1 [2024-3-19 Tue 00:01:00.656611] enter omciMeInitForOntOpticalDat ,1 [ omciAddVendorMeToStdMeTab [2024-3-19 Tue 00:01:00.667368] enter omciMeInitForHwExtendedWan le ] 1216: 1#2 [ omciAddVendorMeToStdMe [2024-3-19 Tue 00:01:00.677457] enter omciMeInitForStandard92Me Table [2024-3-19 Tue 00:01:00.684154] enter omciMeInitForExtend80211Mn ] 12 [2024-3-19 Tue 00:01:00.691326] enter omciMeInitForVoipSoftwareI 20: [2024-3-19 Tue 00:01:00.698187] enter omciMeInitForExtOntProduct 2#2,1 [ o [2024-3-19 Tue 00:01:00.705493][main][1183]:Enter OMCI State Machine, OMCI_STATE_START change to OMCI_STATE_IDLE! mciAddVendo [2024-3-19 Tue 00:01:00.716622][omciInitCapability][539] omciInitCapability In rMeToStdM [2024-3-19 Tue 00:01:00.724697]pPortList(48,248,47,47,47,47,32) eTabl [2024-3-19 Tue 00:01:00.731103]pPort(48) e ] 12 [2024-3-19 Tue 00:01:00.735457]pPort(248) 16: [2024-3-19 Tue 00:01:00.739736]pPort(47) 1#3 [2024-3-19 Tue 00:01:00.744063]pPort(47) [ [2024-3-19 Tue 00:01:00.748354]pPort(47) omci [2024-3-19 Tue 00:01:00.752640]pPort(47) AddVe [2024-3-19 Tue 00:01:00.756929]pPort(32) ndorMeTo [2024-3-19 Tue 00:01:00.761517][omciInitCapability][640] getNext Dev2 currGponAuthObj SN(54504C4789BDCFD8),SNtype(1) StdMeTable [2024-3-19 Tue 00:01:00.772992][omciInitCapability][687] currOmciCapObj.vendorId IS (TPLG) ] 1220: [2024-3-19 Tue 00:01:00.781960]read_flash:read In - 8 bytes in 66977792 2#3,1 [ [2024-3-19 Tue 00:01:00.789519]read_flash:read In - 8 bytes in 66977792 omciAddVendorMeToStdMeTable ] 1216: 1#4 [ omciAddVendorMeToS [2024-3-19 Tue 00:01:00.801639]read_flash:read In - 512 bytes in 1703936 tdMeTable [2024-3-19 Tue 00:01:00.809215]read_flash:read In - 512 bytes in 33554432 ] 1220: 2#4,1 sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) Starting daemon... sendto: No such file or directory line(593) Msg.type(9250) pid(860) [2024-3-19 Tue 00:01:00.832762]do not config omci intance by file info errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid [2024-3-19 Tue 00:01:00.876547][main][1193]:Current State OMCI_STATE_IDLE, recv CONDITION_CFG_DONE change to OMCI_STATE_INIT! (860) errno(2) ret(-1) sendto: No such file or directory lset olt type: 0 ine(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) svchost_get_event_val: get param fail [0] ponTime:Connection Start working_mode: 10 sendto: No such file or directory line(593) Msg.type(9250) [2024-3-19 Tue 00:01:00.929039][main][1221]:Current State OMCI_STATE_INIT, recv CONDITION_ONU_READY change to OMCI_STATE_RUN! piddevice lo entered promiscuous mode (860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) ctromfile.cfg sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sh: /bin/mv: not found sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) gpon flow open ioctl file fail Couldn't open image file: /tmp/tc_store_romfile.conf! sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) Unlocking reservearea ... sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) Could not open mtd device: reservearea [61.725][mapController] 387: Starting map (AL MAC = da:44:89:bd:cf:d9), mapEnable = 1... [61.726][mapController] 9783: send stand renew to in band[0] [61.727][mapController] 9783: send stand renew to in band[1] Couldn't open image file: /tmp/tc_store_romfile.conf! sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) sendto: No such file or directory line(593) Msg.type(9250) pid(860) errno(2) ret(-1) ********************config dump******************* ----------------------status---------------------- processid : 2734 ---------------------configure-------------------- loglevel : 3 verify host : n-device-api.tplinkcloud.com verify port : 0 verify path : /v1/validate post connect timeout : 20 post transfer timeout : 20 get connect timeout : 20 get transfer timeout : 20 session debug : off cer file : /etc/cloud_https/2048new.cer cer type : ************************************************** [61.780][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud [61.859][mapAgent] 383: Starting map (AL MAC = da:44:89:bd:cf:d8), mapEnable = 1... [61.882][TP1905] 4875: Agent on controller [61.883][TP1905] 4875: Agent on controller [62.140][mapAgent] 4148: handleApAutoconfigurationResponse ####### selfDev profile:2, sendDev profile:2 [62.220][mapAgent] 4148: handleApAutoconfigurationResponse ####### selfDev profile:2, sendDev profile:2 updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 allocate buffer for epon_stat_prev. pon_mode = 0 [62.370][cos] 793 - ERROR: PON linkStatus changed :INIT->1 [62.370][cos] 872 - ERROR: PON linkStatus is not Stable (0) sh: write error: Invalid argument [42949435560ms][phy_init.c:1946] PON PHY scu_reset_init mode=1 Auto EPON [62.888][cmm] 14395 - ERROR: AgentOnController not found, update map device fail!!! [63.160][Topology] 3644 - ERROR: overrun timeStamp(0) [63.400][cos] 606 - ERROR: Dropbear error key, or can't listen to 22 port, will restart dropbear. [3183] Mar 19 00:01:02 Running in background [63.432][cos] 793 - ERROR: PON linkStatus changed :INIT->1 [63.432][cos] 797 - ERROR: PON linkStatus isStable (1) [63.438][cmm] 238 - ERROR: exit [63.439][cmm] 455 - ERROR: exit [42949436570ms][phy_init.c:1946] PON PHY scu_reset_init mode=0 Auto GPON [64.461][cos] 793 - ERROR: PON linkStatus changed :1->2 [64.462][cos] 872 - ERROR: PON linkStatus is not Stable (0) ponTime:O5 VoIPBasic_Common SIPProtocol is SIP prevSipStatus: 0, curSipStatus: 0 voip_evt.buf: root.voipbasic.common, type: 3, evt_id: 0x000001c0 gpon flow open io[xgponmgr_lib_ioctl][126]:===Fail Exit===ioctl error! ctl file fail [xgponmgr_lib_ioctl][126]:===Fail Exit===ioctl error! [65.390][cos] 1217: ===============================recv AgentConfig Message======================================== [65.391][cos] 1227: do not support autoconfig in Controller or easymesh disable [65.484][cos] 793 - ERROR: PON linkStatus changed :1->5 [65.484][cos] 797 - ERROR: PON linkStatus isStable (1) [65.492][cmm] 238 - ERROR: exit [65.492][cmm] 455 - ERROR: exit set_virtualdev_ifname_in_arrray,1360,wan[0]:virtualdev_name=nas1_0 dev_name=pon NETDEV_UP: wan_itf_info[0].valid=1, wan_itf_info[0].wan_dev=nas1_0 NETDEV_UP: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_UP: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_UP: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_UP: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_UP: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_UP: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_UP: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_UP: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_UP: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_UP: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_UP: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_UP: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_UP: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_UP: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_UP: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL NETDEV_DOWN: wan_itf_info[0].valid=0, wan_itf_info[0].wan_dev=NULL NETDEV_DOWN: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_DOWN: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_DOWN: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_DOWN: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_DOWN: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_DOWN: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_DOWN: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_DOWN: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_DOWN: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_DOWN: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_DOWN: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_DOWN: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_DOWN: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_DOWN: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_DOWN: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL device pon entered promiscuous mode NETDEV_UP: wan_itf_info[0].valid=1, wan_itf_info[0].wan_dev=nas1_0 NETDEV_UP: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_UP: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_UP: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_UP: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_UP: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_UP: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_UP: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_UP: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_UP: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_UP: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_UP: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_UP: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_UP: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_UP: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_UP: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. [65.956][cmm] 158 - WARN: Empty DNSServer() [grpMgmtGenUpdateFeatureInfo:2607] Get commonToken failed! [grpMgmt_updateFeatureInfo:4746] Failed to generate update feature info message to cloud gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail gpon flow open ioctl file fail MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, w[gponmapIoctl][65]:gpon mapping IOCTL error! ith [gponmapIoctl][65]:gpon mapping IOCTL error! keep[gponmapIoctl][65]:gpon mapping IOCTL error! ali[gponmapIoctl][65]:gpon mapping IOCTL error! ve[2[gponmapIoctl][65]:gpon mapping IOCTL error! 3[gponmapIoctl][65]:gpon mapping IOCTL error! 5] [gponmapIoctl][65]:gpon mapping IOCTL error! Fail[gponmapIoctl][65]:gpon mapping IOCTL error! ed [gponmapIoctl][65]:gpon mapping IOCTL error! to co[gponmapIoctl][65]:gpon mapping IOCTL error! nnec[gponmapIoctl][65]:gpon mapping IOCTL error! t v5[gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! with[gponmapIoctl][65]:gpon mapping IOCTL error! Loo[gponmapIoctl][65]:gpon mapping IOCTL error! ku[gponmapIoctl][65]:gpon mapping IOCTL error! p er[gponmapIoctl][65]:gpon mapping IOCTL error! ror. ([gponmapIoctl][65]:gpon mapping IOCTL error! 15) [gponmapIoctl][65]:gpon mapping IOCTL error! H[gponmapIoctl][65]:gpon mapping IOCTL error! andl[gponmapIoctl][65]:gpon mapping IOCTL error! eMqt[gponmapIoctl][65]:gpon mapping IOCTL error! tEr[gponmapIoctl][65]:gpon mapping IOCTL error! ror:[gponmapIoctl][65]:gpon mapping IOCTL error! Dis[gponmapIoctl][65]:gpon mapping IOCTL error! conn[gponmapIoctl][65]:gpon mapping IOCTL error! e[gponmapIoctl][65]:gpon mapping IOCTL error! ct fail[gponmapIoctl][65]:gpon mapping IOCTL error! ed[gponmapIoctl][65]:gpon mapping IOCTL error! . A[gponmapIoctl][65]:gpon mapping IOCTL error! lrea[gponmapIoctl][65]:gpon mapping IOCTL error! dy d[gponmapIoctl][65]:gpon mapping IOCTL error! isco[gponmapIoctl][65]:gpon mapping IOCTL error! n[gponmapIoctl][65]:gpon mapping IOCTL error! necte[gponmapIoctl][65]:gpon mapping IOCTL error! d?[gponmapIoctl][65]:gpon mapping IOCTL error! gpon flow open ioctl file fail [69.940][ntpc] 789 - ERROR: open DNS error NTP server list: [Mar 19 00:01:09] radvd: poll error: Interrupted system call [Mar 19 00:01:09] radvd: poll error: Interrupted system call [70.581][cos] 1315 - WARN: Find main pool dhcp obj iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. [2024/03/19 00:01:09] getifaddr.c:334: runtponTime:Traffic Up ime_vars.ifaces[0]=br0 [clearTxRxPowerAlarm][1634]clear power alarmNum(1) first, then report the alarm [omci_pm_alarm_tx_rx_power][1749]rx power alarm happened, rxPower:0.092000, rxPowerLowerTh:-28.000000, rxPowerUpperTh:-8.000000 ddns_ud> Recieve Default Route Changed Msg! ddns_ud> ddns_un get ip 7.1.168.192 ddns_ud> ddns_un not enable(0) or user logout(0), do nothing! iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 Port mapping is already running! iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). ip6tables: Bad rule (does a matching rule exist in that chain?). MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [71.347][cwmp] 292 - ERROR: find IPv4 fullpath for 192.168.1.7 [account_checkBindStatusHandler:3862] Failed to get device token from cloud server. ipv6 Virule mark is set to 97, src addr is 0701A8C0 a:0 zeroIp:0 zeroIp6:1 ipaddr:192.168.1.7 ip6addr: zeroIp:0 zeroIp6:1 ipaddr:192.168.1.7 ip6adrule mark is set to 97, src addr is 0701A8C0 dr: cmd is pjsua --config-file /var/tmp/cmsip.conf --bound-ifname nas1_0 --bound-addr 192.168.1.7 --set-mark 610061 & 00:01:10.864 pjsua_core.c DNS resolver is disabled (PJSIP_HAS_RESOLVER==0) iptables -A INPUT -p udp -d 192.168.1.7 --dport 5060 -j ACCEPT pid 3380's current affinity mask: 2 pid 3380's new affinity mask: 2 iptables -t mangle -A OUTPUT -p udp -s 192.168.1.7 --sport 5060 -j MARK --set-mark 0x61 [72.429][ipv6] 388 - ERROR: Could not find pid of dibbler-client with connection name is ipoe_gpon_0_0_d! Starting daemon... [72.576][cmm] 1760 - ERROR: should we notify voice? [72.846][cmm] 2680 - WARN: Intf(nas1_0) with Enabled Addr, don't sent Down to CWMP now [72.861][cmm] 1054 - ERROR: Invalid DNSv6 server address route: ioctl 0x890c failed: No such process [72.877][cos] 689 - WARN: should check detect process [72.897][wanconn] 643 - ERROR: Not find thread, Try to create one. [72.899][cos] 2212 - WARN: may have to get HW speed from driver/chip [73.924][cmm] 492 - WARN: Current dns svr: 192.168.1.1,0.0.0.0, dnsv6 svr: NTP server list:200.160.7.197 172.233.29.160 168.181.126.108 162.159.200.123 200.189.40.8 [Feb 19 11:35:13] radvd: poll error: Interrupted system call [Feb 19 11:35:13] radvd: poll error: Interrupted system call [Feb 19 11:35:13] radvd: poll error: Interrupted system call MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] DEVICE_SECURITY_TrustCertVerifyCallbackWithCertChain: OpenSSL error: unable to get local issuer certificate (err_code=20) at depth=2 Trust Store certificates: ParseCert_SubjectAlt: WARNING: Certificate has more than one SubjectAltName defined. Using only first. DEVICE_SECURITY_GetControllerTrust: CA cert in chain of trust, not found in Device.Security.Certificate Trust Store certificates: Failed to get the controller trust with err: 7003 DM_EXEC_EnableNotifications: 857 DM_EXEC_EnableNotifications: 860 Sending NotifyRequest (Event for path=Device.LocalAgent.Subscription.2) [ Subscribe ] 608: sub->state: 0. sub->topic: /tpuc/D84489-Device2-22445J1001433. Subscribe: Sending subscribe to /tpuc/D84489-Device2-22445J1001433 0 2 DM_EXEC_EnableNotifications: 864 ProcessMessageQueueSocketActivity: 1069 [ SubscribeCallback ] 1589: Response topic has been subscribed. === SendOnBoardRequest Operation completed with result=0 === Fail to find controller. [ cmm_data_model_adapter_execDelaySetTask ] 363: 1#1 [76.220][cmm] 2694 - ERROR: [ PID=3020 ] write usrconf to nor flash (note: please resure your flash-write necessary) Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 GET : processing at time 2026-02-19T14:35:15Z START [TR-369] Get Process: Object path [Device.DeviceInfo.] GET : processing at time 2026-02-19T14:35:15Z END GET : processing at time 2026-02-19T14:35:15Z START [TR-369] Get Process: Object path [Device.DeviceInfo.] GET : processing at time 2026-02-19T14:35:15Z END GET : processing at time 2026-02-19T14:35:16Z START [TR-369] Get Process: Object path [Device.LocalAgent.] GET : processing at time 2026-02-19T14:35:16Z END GET : processing at time 2026-02-19T14:35:17Z START [TR-369] Get Process: Object path [Device.MQTT.] GET : processing at time 2026-02-19T14:35:17Z END ADD : processing at time 2026-02-19T14:35:18Z START [79.003][cmm] 2694 - ERROR: [ PID=3020 ] write usrconf to nor flash (note: please resure your flash-write necessary) Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 ADD : processing at time 2026-02-19T14:35:18Z END GET : processing at time 2026-02-19T14:35:19Z START [TR-369] Get Process: Object path [Device.LocalAgent.Subscription.3.] GET : processing at time 2026-02-19T14:35:19Z END SET : processing at time 2026-02-19T14:35:19Z START [TR-369] Set Process: Object path [Device.LocalAgent.Controller.1.] SET : processing at time 2026-02-19T14:35:19Z END [ cmm_data_model_adapter_execDelaySetTask ] 363: 1#1 [80.746][cmm] 2694 - ERROR: [ PID=3020 ] write usrconf to nor flash (note: please resure your flash-write necessary) Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 SET : processing at time 2026-02-19T14:35:19Z START [TR-369] Set Process: Object path [Device.LocalAgent.Controller.1.] SET : processing at time 2026-02-19T14:35:20Z END [ cmm_data_model_adapter_execDelaySetTask ] 363: 1#1 [80.974][cmm] 2694 - ERROR: [ PID=3020 ] write usrconf to nor flash (note: please resure your flash-write necessary) Erase from 0xa0000 with 0x20000 bytes TP board sdk_flash_erase addr 000a0000, len 20000 Write flash to 0xa0000, len is 0x20000 TP board sdk_flash_write to 000a0000, len 20000 [84.223][cmm] 2680 - WARN: Intf(nas1_0) with Enabled Addr, don't sent Down to CWMP now [84.248][cos] 2212 - WARN: may have to get HW speed from driver/chip br0: port 2(eth0.2) entered disabled state [94.455][ipv6] 388 - ERROR: Could not find pid of dibbler-client with connection name is ipoe_gpon_0_0_d! Starting daemon... Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. Starting daemon... [Feb 19 11:35:33] radvd: poll error: Interrupted system call [94.984][cmm] 1054 - ERROR: Invalid DNSv6 server address [94.985][cmm] 1760 - ERROR: should we notify voice? Starting daemon... sh: write error: Invalid argument [95.343][cos] 154: start agent firmware subscription [95.353][cos] 2212 - WARN: may have to get HW speed from driver/chip [meshUpgradeAgentFwSubscription:2735] Request Json String: {"subscription":[]} br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state [97.244][Platform] 412: Ethernet Link Stats Change Receive: port(eth0.2), state(1) Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. sh: write error: Invalid argument updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 [105.586][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [115.806][cos] 2212 - WARN: may have to get HW speed from driver/chip [DEBUG]client 397: devices[index].device_type is 1, devices[index].is_uncertain is 0 gdpr_getSystemGDPREntry Error gdpr_getNewSystemGDPREntry OK Generate RSA key success! [123.518][Topology] 3644 - ERROR: overrun timeStamp(0) [123.753][httpd] 1285 - ERROR: get test mode fail. [126.173][cos] 1480: auto FW upgrade start [126.174][cos] 930: auto FW upgrade role check [126.174][cos] 958: auto FW upgrade enable check [126.174][cos] 1537: auto upgrade not enable, skip it [126.174][cos] 1524: force FW upgrade start [126.175][cos] 911: force FW upgrade role check [126.175][cos] 939: force FW upgrade enable check [126.175][cos] 974: force FW upgrade period check [126.176][cos] 1035: thresh range 40 [126.176][cos] 1042: delay init [0/5] [126.176][cos] 1046: force hour 3 current 11 [126.176][cos] 1599: not update at this period, skip it [126.186][cos] 2212 - WARN: may have to get HW speed from driver/chip [126.352][cutil] 1918 - ERROR: Invalid DNS() or pUrl(a.root-servers.net) [126.352][diag] 1541 - ERROR: parse a.root-servers.net failed with DNSv6 [136.427][cos] 2212 - WARN: may have to get HW speed from driver/chip [146.647][cos] 2212 - WARN: may have to get HW speed from driver/chip [156.874][cos] 2212 - WARN: may have to get HW speed from driver/chip [167.096][cos] 2212 - WARN: may have to get HW speed from driver/chip [177.318][cos] 2212 - WARN: may have to get HW speed from driver/chip [187.641][cos] 1480: auto FW upgrade start [187.641][cos] 930: auto FW upgrade role check [187.641][cos] 958: auto FW upgrade enable check [187.642][cos] 1537: auto upgrade not enable, skip it [187.642][cos] 1524: force FW upgrade start [187.642][cos] 911: force FW upgrade role check [187.643][cos] 939: force FW upgrade enable check [187.643][cos] 974: force FW upgrade period check [187.643][cos] 1046: force hour 3 current 11 [187.644][cos] 1599: not update at this period, skip it [187.652][cos] 2212 - WARN: may have to get HW speed from driver/chip [197.906][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [208.127][cos] 2212 - WARN: may have to get HW speed from driver/chip [218.353][cos] 2212 - WARN: may have to get HW speed from driver/chip [228.576][cos] 2212 - WARN: may have to get HW speed from driver/chip [238.797][cos] 2212 - WARN: may have to get HW speed from driver/chip [249.121][cos] 1480: auto FW upgrade start [249.121][cos] 930: auto FW upgrade role check [249.122][cos] 958: auto FW upgrade enable check [249.122][cos] 1537: auto upgrade not enable, skip it [249.122][cos] 1524: force FW upgrade start [249.122][cos] 911: force FW upgrade role check [249.123][cos] 939: force FW upgrade enable check [249.123][cos] 974: force FW upgrade period check [249.123][cos] 1046: force hour 3 current 11 [249.124][cos] 1599: not update at this period, skip it [249.132][cos] 2212 - WARN: may have to get HW speed from driver/chip starting pid 1130, tty '': '/sbin/getty -L ttyS0 115200 vt100' /bin/sh: can't access tty; job control turned off ~ # sys wan2lan on 15 Current wan2lan feature status: on Current portmask number is[15] ~ # /userfs/bin/ponmgr gpon get info ONU Info: ONU ID: 1 ONU State: O5 SN: TPLG89bdcfd8 PASSWD: ASCII: HEX: 00000000000000000000 Key Idx: 0 Key: 00000000000000000000000000000000 O1 Timer: 10000 ms O2 Timer: 100 ms OMCC ID: 1 ~ # ~ # ~ # [259.377][cos] 2212 - WARN: may have to get HW speed from driver/chip [269.597][cos] 2212 - WARN: may have to get HW speed from driver/chip tcapi set OMCI_Entry0 DebugLevel 1 tcapi save~ # ~ # tcapi save [2026-2-19 Thu 11:38:30.758241][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:38:36.762415][**ERROR**] [processOmciMsg][5599]: result=2 tcapi commit OMCI_Entry0 ~ # [279.824][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:38:42.766610][**ERROR**] [processOmciMsg][5599]: result=2 echo "msg oam 1" > /proc/xgpon/debug /bin/sh: can't create /proc/xgpon/debug: nonexistent directory ~ # [2026-2-19 Thu 11:38:48.770821][**ERROR**] [processOmciMsg][5599]: result=2 [290.047][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [2026-2-19 Thu 11:38:54.775025][**ERROR**] [processOmciMsg][5599]: result=2 echo ring_buffer_mode 1 > /proc/uart/uart isRingBufferMode:enable cho "msg act 1" > /proc/xgpon/debug /bin/sh: can't create /proc/xgpon/debug: nonexistent directory ~ # [300.266][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:39:00.779225][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:39:06.783438][**ERROR**] [processOmciMsg][5599]: result=2 [310.583][cos] 1480: auto FW upgrade start [310.583][cos] 930: auto FW upgrade role check [310.584][cos] 958: auto FW upgrade enable check [310.584][cos] 1537: auto upgrade not enable, skip it [310.584][cos] 1524: force FW upgrade start [310.584][cos] 911: force FW upgrade role check [310.585][cos] 939: force FW upgrade enable check [310.585][cos] 974: force FW upgrade period check [310.585][cos] 1046: force hour 3 current 11 [310.585][cos] 1599: not update at this period, skip it [310.594][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:39:12.787674][**ERROR**] [processOmciMsg][5599]: result=2 MQTT Info: Client D84489-Device2-22445J1001433 sending PINGREQ MQTT Info: Client D84489-Device2-22445J1001433 received PINGRESP [2026-2-19 Thu 11:39:18.791936][**ERROR**] [processOmciMsg][5599]: result=2 [320.836][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:39:24.796085][**ERROR**] [processOmciMsg][5599]: result=2 [331.057][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:39:30.800253][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:39:36.804460][**ERROR**] [processOmciMsg][5599]: result=2 [341.284][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:39:42.808658][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:39:48.812870][**ERROR**] [processOmciMsg][5599]: result=2 [351.488][cos] 793 - ERROR: PON linkStatus changed :5->0 [351.489][cos] 872 - ERROR: PON linkStatus is not Stable (0) [351.514][cos] 2212 - WARN: may have to get HW speed from driver/chip [352.522][cos] 793 - ERROR: PON linkStatus changed :5->0 [352.522][cos] 797 - ERROR: PON linkStatus isStable (1) [2026/02/19 11:39:51] getifaddr.c:334: runtime_vars.ifaces[0]=br0 [352.579][cmm] 158 - WARN: Empty DNSServer(0.0.0.0,0.0.0.0) ddns_ud> Recieve Default Route Changed Msg! ddns_ud> ddns_un get ip 0.0.0.0 ddns_ud> ddns_un not enable(0) or user logout(0), do nothing! iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 Port mapping is already running! [353.200][cmm] 2680 - WARN: Intf(nas1_0) with Enabled Addr, don't sent Down to CWMP now MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. Starting daemon... [Feb 19 11:39:52] radvd: poll error: Interrupted system call route: ioctl 0x890c failed: No such process [353.722][cmm] 1054 - ERROR: Invalid DNSv6 server address [Feb 19 11:39:52] radvd: poll error: Interrupted system call Starting daemon... RTNETLINK answers: Cannot assign requested address [354.537][cmm] 1356 - ERROR: Failed to get object from fullPath(Device.X_TP_GPON.Link.1.)NETDEV_DOWN: wan_itf_info[0].valid=0, wan_ itf_info[0].wan_dev=NULL NETDEV_DOWN: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_DOWN: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_DOWN: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_DOWN: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_DOWN: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_DOWN: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_DOWN: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_DOWN: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_DOWN: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_DOWN: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_DOWN: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_DOWN: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_DOWN: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_DOWN: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_DOWN: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL [354.721][cmm] 238 - ERROR: exit [354.722][cmm] 455 - ERROR: exit [354.723][cmm] 1956 - ERROR: ret=9805 [354.724][cwmp] 287 - ERROR: could not find IPv4 fullpath for 192.168.1.7,try IPv6 ipv6 Via:0 [354.727][cmm] 1956 - ERROR: ret=9805 [354.727][cwmp] 302 - ERROR: could not find IPv6 fullpath for 192.168.1.7,return.... zeroIp:1 zeroIp6:1 ipaddr:0.0.0.0 ip6addr: iptables -D INPUT -p udp -d 192.168.1.7 --dport 5060 -j ACCEPT iptables -t mangle -D OUTPUT -p udp -s 192.168.1.7 --sport 5060 -j MARK --set-mark 0x61 [356.214][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.215][cmm] 1653 - ERROR: ret=9007 [356.215][cmm] 707 - ERROR: ret=9007 [356.215][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.216][cmm] 1653 - ERROR: ret=9007 [356.216][cmm] 707 - ERROR: ret=9007 [356.216][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.216][cmm] 1653 - ERROR: ret=9007 [356.217][cmm] 707 - ERROR: ret=9007 [356.217][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.217][cmm] 1653 - ERROR: ret=9007 [356.217][cmm] 707 - ERROR: ret=9007 [356.218][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.218][cmm] 1653 - ERROR: ret=9007 [356.218][cmm] 707 - ERROR: ret=9007 [356.219][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.219][cmm] 1653 - ERROR: ret=9007 [356.219][cmm] 707 - ERROR: ret=9007 [356.219][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.220][cmm] 1653 - ERROR: ret=9007 [356.220][cmm] 707 - ERROR: ret=9007 [356.220][cmm] 1807 - ERROR: The lengh(0) of phone number() is less than 3 or lager than 32. [356.221][cmm] 1653 - ERROR: ret=9007 [356.221][cmm] 707 - ERROR: ret=9007 [358.110][cutil] 316 - ERROR: setsockopt(bind ifname: nas1_0) failed, errno str: No such file or directory [358.110][cutil] 618 - ERROR: init sock fail [358.110][cutil] 316 - ERROR: setsockopt(bind ifname: nas1_0) failed, errno str: No such file or directory [358.110][cutil] 618 - ERROR: init sock fail [358.111][cutil] 316 - ERROR: setsockopt(bind ifname: nas1_0) failed, errno str: No such file or directory [358.111][cutil] 618 - ERROR: init sock fail [360.881][cos] 793 - ERROR: PON linkStatus changed :0->2 [360.882][cos] 872 - ERROR: PON linkStatus is not Stable (0) ponTime:O5 [361.904][cos] 793 - ERROR: PON linkStatus changed :0->5 [361.904][cos] 797 - ERROR: PON linkStatus isStable (1) [361.911][cmm] 238 - ERROR: exit [361.911][cmm] 455set_virtualdev_ifname_in_arrray,1360,wan[0]:virtualdev_name=nas1_0 dev_name=pon NETDEV_UP: wan_itf_info[0].valid=1, wan_itf_info[0].wan_dev=nas1_0 NETDEV_UP: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_UP: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_UP: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_UP: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_UP: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_UP: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_UP: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_UP: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_UP: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_UP: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_UP: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_UP: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_UP: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_UP: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_UP: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL NETDEV_DOWN: wan_itf_info[0].valid=0, wan_itf_info[0].wan_dev=NULL NETDEV_DOWN: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_DOWN: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_DOWN: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_DOWN: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_DOWN: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_DOWN: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_DOWN: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_DOWN: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_DOWN: wan_itf_info[9].valid=0, wan_itabf_info[9].wan_dev=NULL NETDEV_DOWN: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_DOWN: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_DOWN: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_DOWN: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_DOWN: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_DOWN: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL NETDEV_UP: wan_0itf_info[0].valid=1, wan_itf_info[0].wan_dev=nas1_0 NETDEV_UP: wan_itf_info[1].valid=0, wan_itf_info[1].wan_dev=NULL NETDEV_UP: wan_itf_info[2].valid=0, wan_itf_info[2].wan_dev=NULL NETDEV_UP: wan_itf_info[3].valid=0, wan_itf_info[3].wan_dev=NULL NETDEV_UP: wan_itf_info[4].valid=0, wan_itf_info[4].wan_dev=NULL NETDEV_UP: wan_itf_info[5].valid=0, wan_itf_info[5].wan_dev=NULL NETDEV_UP: wan_itf_info[6].valid=0, wan_itf_info[6].wan_dev=NULL NETDEV_UP: wan_itf_info[7].valid=0, wan_itf_info[7].wan_dev=NULL NETDEV_UP: wan_itf_info[8].valid=0, wan_itf_info[8].wan_dev=NULL NETDEV_UP: wan_itf_info[9].valid=0, wan_itf_info[9].wan_dev=NULL NETDEV_UP: wan_itf_info[10].valid=0, wan_itf_info[10].wan_dev=NULL NETDEV_UP: wan_itf_info[11].valid=0, wan_itf_info[11].wan_dev=NULL NETDEV_UP: wan_itf_info[12].valid=0, wan_itf_info[12].wan_dev=NULL NETDEV_UP: wan_itf_info[13].valid=0, wan_itf_info[13].wan_dev=NULL NETDEV_UP: wan_itf_info[14].valid=0, wan_itf_info[14].wan_dev=NULL NETDEV_UP: wan_itf_info[15].valid=0, wan_itf_info[15].wan_dev=NULL MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [364.221][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:40:03.537251][**ERROR**] [omci_flow_get_me_by_classid][84]unkown reserved ME(65530) . [2026-2-19 Thu 11:40:03.541280][**ERROR**] [omci_flow_get_me_by_classid][84]unkown reserved ME(65530) . [2026-2-19 Thu 11:40:03.550088][**ERROR**] [omci_flow_get_me_by_classid][84]unkown reserved ME(65530) . us: 0, cu [2026-2-19 Thu 11_:40:03.566080][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=5, instId=258 [2026-2-19 Thu 11:40:03.566428][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=5, instId=261 [2026-2-19 Thu 11:40:03.566679][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=5, instId=262 [2026-2-19 Thu 11:40:03.566922][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=6, instId=258 [2026-2-19 Thu 11:40:03.567171][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=6, instId=261 [2026-2-19 Thu 11:40:03.567395][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=6, instId=262 [2026-2-19 Thu 11:40:03.567785][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=332, instId=0 [2026-2-19 Thu 11:40:03.569466][**ERROR**] [initCTCLoidAuthStruct][670] initCTCLoidAuthStruct tmp->loid = TBD [2026-2-19 Thu 11:40:03.569782][**ERROR**] [OnuCreateInitInst][1227]:do not need init inst classId=367, instId=0 [xgponmgr_lib_ioctl][126]:===Fail Exit===ioctl error! [xgponmgr_lib_ioctl][126]:===Fail Exit===ioctl error! gpon [2026-2-19 Thu 11:40:05.929564][**ERROR**] omci_flow_handle_mbsp [168] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 tThu 11 :40:05.939755][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 Thu 11:40:05.9 54527][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2 -19 Thu 11:40:05. 970527][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 Tlhu 11:40:05. 986516][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 Thu 11:40:05 .998706][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail [2026-2-19 Thu 11:40:06.9334][**ERROR**] [omciRxHandle][1430] send OMCI_UNKNOW_ME_INST error msg [2026-2-19 Thu 11:40:06.9825][**ERROR**] omciLowProcessTask omciRxHandle rxLowQ error! gpon [2026-2-19 Thu 11:40:0l6.26814][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail [2026-2-19 Thu 11:40:06.37319][**ERROR**] [omciRxHandle][1430] send OMCI_UNKNOW_ME_INST error msg [2026-2-19 Thu 11:40:06.37798][**ERROR**] omciLowProcessTask omciRxHandle rxLowQ error! gpon [2026-2-19 Thu 11:4a0:06.54981][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail [2026-2-19 Thu 11:40:06.65340][**ERROR**] [omciRxHandle][1430] send OMCI_UNKNOW_ME_INST error msg [2026-2-19 Thu 11:40:06.65831][**ERROR**] omciLowProcessTask omciRxHandle rxLowQ error! gpon [2026-2-19 Thu 11:4f0:06.83050][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail [2026-2-19 Thu 11:40:06.93339][**ERROR**] [omciRxHandle][1430] send OMCI_UNKNOW_ME_INST error msg [2026-2-19 Thu 11:40:06.93826][**ERROR**] omciLowProcessTask omciRxHandle rxLowQ error! gpon [2026-2-19 Thu 11:40a:06.110982][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 Thu 11:40:06. 126628][**ERROR**] omci_flow_handle_gem_ctp [450] gpon_flow_ioctl_import_me_data fail gpon [2026e- 2-19 Thu 11:40:06.137155][**ERROR**] omci_flow_handle_multi_gem_iw_tp [512] gpon_flow_ioctl_import_me_data fail gpon [20o26- 2-19 Thu 11:40:06.148442][**ERROR**] omci_flow_handle_multi_gem_iw_tp [512] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19t Thu 11:40:06.159729][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2 -19 Thu 11:40:06.170154][**ERROR**] omci_flow_handle_mbsp [168] gpon_flow_ioctl_import_me_data fail gpon [20o26- 2-19 Thu 11:40:06.180402][**ERROR**] omci_flow_handle_tcont [557] gpon_flow_ioctl_import_me_data fail gpon [2026-2 -19 Thu 11:40i:06.190839][**ERROR**] omci_flow_handle_gem_ctp [450] gpon_flow_ioctl_import_me_data fail gpon f [2026-2o-19 Thu 11:40:06.201434][**ERROR**] omci_flow_handle_802_1p_mapper [342] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 Thu 11:40:06.212655][**ERROR**] omci_flow_handle_mbpcd [225] gpon_flow_ioctl_import_me_data fail gpon [2026-2-19 Thu 11:40:06.222911][**ERROR**] omci_flow_handle_vtfd [292] gpon_flow_ioctl_import_me_data fail gpon [2026-2 -19 Thu 11:40:06.233084][**ERROR**] omci_flow_handle_gem_iw_tp [402] gpon_flow_ioctl_import_me_data fail [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! [gponmapIoctl][65]:gpon mapping IOCTL error! gpon flow o [2026-2-19 Thu 11:40:06.388917][**ERROR**] omci_flow_handle_802_1p_mapper [342] gpon_flow_ioctl_import_me_data fail [2026-2-19 Thu 11:40:06.401518][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.413445][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.425790][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.437317][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.449440][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.461256][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.473414][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.485493][**ERROR**] [omci_me_general_set_op][968]current table entry number = 1 Split Fail [2026-2-19 Thu 11:40:06.489488][**ERROR**] [getTransmitOpticalLevelValue] transmitOpticalLevel = 47144 [370.021][cos] 1315 - WARN: Find main pool dhcp obj iptables: No chain/target/match by that name. [2026/02/19 11:40:09] getifaddr.c:334: runtime_vars.ifaces[0]=br0 ddns_ud> Recieve Default Route Changed Msg! ddns_ud> ddns_un get ip 7.1.168.192 ddns_ud> ddns_un not enable(0) or user logout(0), do nothing! iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -t nat -F PREROUTING_UPNP_SECCONN" execute ok, exit status = 1 iptables: No chain/target/match by that name. cmd:"/usr/bin/iptables -F FORWARD_UPNP_SECCONN" execute ok, exit status = 1 Port mapping is already running! ponTime:Traffic Up [clearTxRxPowerAlarm][1634]clear power alarmNum(1) first, then report the alarm [omci_pm_alarm_tx_rx_power][1749]rx power alarm happened, rxPower:-0.325000, rxPowerLowerTh:-28.000000, rxPowerUpperTh:-8.000000 MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] [370.784][cwmp] 292 - ERROR: find IPv4 fullpath for 192.168.1.7 Failed to connect v5 with Lookup error. (15) HandleMqttError: Disconnect failed. Already disconnected? [account_checkBindStatusHandler:3924] Failed to get bind status from cloud server. ipv6 Via:0 zeroIp:0 zeroIp6:1 ipaddr:192.168.1.7 ip6addr: all ports deleted rule mark is set to 0, src addr is 00000000 rule mark is set to 97, src addr is 0701A8C0 r:192.168.1.7 ip6arul:e mark is set to 97, src addr is 0701A8C0 .conf --bound-ifname nas1_0 --bound-addr 192.168.1.7 --set-mark 610061 & 11:40:09.883 pjsua_core.c DNS resolver is disabled (PJSIP_HAS_RESOLVER==0) iptables -A INPUT -p udp -d 192.168.1.7 --dport 5060 -j ACCEPT iptables -t mangle -A OUTPUT -p udp -s 192.168.1.7 --sport 5060 -j MARK --set-mark 0x61 pid 4548's current affinity mask: 2 pid 4548's new affinity mask: 2 [2026-2-19 Thu 11:40:12.505688][**ERROR**] [processOmciMsg][5599]: result=2 [374.926][cmm] 2680 - WARN: Intf(nas1_0) with Enabled Addr, don't sent Down to CWMP now [375.013][cos] 1480: auto FW upgrade start [375.014][cos] 930: auto FW upgrade role check [375.014][cos] 958: auto FW upgrade enable check [375.014][cos] 1537: auto upgrade not enable, skip it [375.014][cos] 1524: force FW upgrade start [375.015][cos] 911: force FW upgrade role check [375.015][cos] 939: force FW upgrade enable check [375.015][cos] 974: force FW upgrade period check [375.015][cos] 1046: force hour 3 current 11 [375.016][cos] 1599: not update at this period, skip it [375.024][cos] 2212 - WARN: may have to get HW speed from driver/chip [376.064][cmm] 492 - WARN: Current dns svr: 192.168.1.1,0.0.0.0, dnsv6 svr: NTP server list:172.233.29.160 168.181.126.108 194.0.5.123 200.160.7.193 200.160.7.193 [Feb 19 11:40:15] radvd: poll error: Interrupted system call [Feb 19 11:40:15] radvd: poll error: Interrupted system call [Feb 19 11:40:15] radvd: poll error: Interrupted system call [2026-2-19 Thu 11:40:18.370524][**ERROR**] [processOmciMsg][5599]: result=2 MQTT: Connect to host tauc-mqtt-broker.tplinkcloud.com:8883, with keepalive[235] DEVICE_SECURITY_TrustCertVerifyCallbackWithCertChain: OpenSSL error: unable to get local issuer certificate (err_code=20) at depth=2 Trust Store certificates: ParseCert_SubjectAlt: WARNING: Certificate has more than one SubjectAltName defined. Using only first. DEVICE_SECURITY_GetControllerTrust: CA cert in chain of trust, not found in Device.Security.Certificate Trust Store certificates: Failed to get the controller trust with err: 7003 ProcessMessageQueueSocketActivity: 1069 [ Subscribe ] 608: sub->state: 0. sub->topic: /tpuc/D84489-Device2-22445J1001433. Subscribe: Sending subscribe to /tpuc/D84489-Device2-22445J1001433 0 2 [ SubscribeCallback ] 1589: Response topic has been subscribed. Fail to find controller. sleep 90s! [2026-2-19 Thu 11:40:24.374694][**ERROR**] [processOmciMsg][5599]: result=2 [385.959][ipv6] 388 - ERROR: Could not find pid of dibbler-client with connection name is ipoe_gpon_0_0_d! Starting daemon... Bad argument `REJECT' Try `ip6tables -h' or 'ip6tables --help' for more information. Starting daemon... [Feb 19 11:40:25] radvd: poll error: Interrupted system call [386.494][cmm] 1054 - ERROR: Invalid DNSv6 server address [386.495][cmm] 1760 - ERROR: should we notify voice? Starting daemon... route: ioctl 0x890c failed: No such process [386.809][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:40:30.378927][**ERROR**] [processOmciMsg][5599]: result=2 [397.047][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:40:36.383089][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:40:42.387291][**ERROR**] [processOmciMsg][5599]: result=2 [407.274][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:40:48.391492][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:40:54.395708][**ERROR**] [processOmciMsg][5599]: result=2 [417.497][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:41:00.399907][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:41:06.404122][**ERROR**] [processOmciMsg][5599]: result=2 [427.720][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:41:12.408321][**ERROR**] [processOmciMsg][5599]: result=2 [438.033][cos] 1480: auto FW upgrade start [438.034][cos] 930: auto FW upgrade role check [438.034][cos] 958: auto FW upgrade enable check [438.034][cos] 1537: auto upgrade not enable, skip it [438.034][cos] 1524: force FW upgrade start [438.035][cos] 911: force FW upgrade role check [438.035][cos] 939: force FW upgrade enable check [438.035][cos] 974: force FW upgrade period check [438.035][cos] 1046: force hour 3 current 11 [438.036][cos] 1599: not update at this period, skip it [438.044][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:41:18.412611][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:41:24.416696][**ERROR**] [processOmciMsg][5599]: result=2 [448.288][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:41:30.420923][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:41:36.425123][**ERROR**] [processOmciMsg][5599]: result=2 [458.506][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:41:42.429323][**ERROR**] [processOmciMsg][5599]: result=2 [468.733][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:41:48.433538][**ERROR**] [processOmciMsg][5599]: result=2 sleep 90s! [2026-2-19 Thu 11:41:54.437737][**ERROR**] [processOmciMsg][5599]: result=2 [478.957][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:42:00.441939][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:42:06.446149][**ERROR**] [processOmciMsg][5599]: result=2 [489.176][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:42:12.450353][**ERROR**] [processOmciMsg][5599]: result=2 [499.491][cos] 1480: auto FW upgrade start [499.491][cos] 930: auto FW upgrade role check [499.491][cos] 958: auto FW upgrade enable check [499.492][cos] 1537: auto upgrade not enable, skip it [499.492][cos] 1524: force FW upgrade start [499.492][cos] 911: force FW upgrade role check [499.492][cos] 939: force FW upgrade enable check [499.493][cos] 974: force FW upgrade period check [499.493][cos] 1046: force hour 3 current 11 [499.493][cos] 1599: not update at this period, skip it [499.501][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:42:18.454617][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:42:24.458802][**ERROR**] [processOmciMsg][5599]: result=2 [509.746][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:42:30.462962][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:42:36.467179][**ERROR**] [processOmciMsg][5599]: result=2 [519.967][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:42:42.471369][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:42:48.475577][**ERROR**] [processOmciMsg][5599]: result=2 [530.193][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:42:54.479773][**ERROR**] [processOmciMsg][5599]: result=2 [540.416][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:43:00.483962][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:43:06.488185][**ERROR**] [processOmciMsg][5599]: result=2 [550.638][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:43:12.492505][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:43:18.496585][**ERROR**] [processOmciMsg][5599]: result=2 [560.971][cos] 1480: auto FW upgrade start [560.971][cos] 930: auto FW upgrade role check [560.972][cos] 958: auto FW upgrade enable check [560.972][cos] 1537: auto upgrade not enable, skip it [560.972][cos] 1524: force FW upgrade start [560.972][cos] 911: force FW upgrade role check [560.973][cos] 939: force FW upgrade enable check [560.973][cos] 974: force FW upgrade period check [560.973][cos] 1046: force hour 3 current 11 [560.973][cos] 1599: not update at this period, skip it [560.981][cos] 2212 - WARN: may have to get HW speed from driver/chip sleep 90s! [2026-2-19 Thu 11:43:24.500837][**ERROR**] [processOmciMsg][5599]: result=2 [571.226][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:43:30.504988][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:43:36.509190][**ERROR**] [processOmciMsg][5599]: result=2 [581.447][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:43:42.513401][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:43:48.517598][**ERROR**] [processOmciMsg][5599]: result=2 [591.693][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:43:54.521791][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:44:00.525996][**ERROR**] [processOmciMsg][5599]: result=2 [601.917][cos] 2212 - WARN: may have to get HW speed from driver/chip br0: port 2(eth0.2) entered disabled state hernet Link Stats Change Receive: port(eth0.2), state(0) Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. sh: write error: Invalid argument [2026-2-19 Thu 11:44:06.530200][**ERROR**] [processOmciMsg][5599]: result=2 br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state tate(1) Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. sh: write error: Invalid argument sh: write error: Invalid argument [612.152][cos] 2212 - WARN: may have to get HW speed from driver/chip br0: port 2(eth0.2) entered disabled state [612.224][Platform] 412: Ethernet Link Stats Change Receive: port(eth0.2), state(0) Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. [2026-2-19 Thu 11:44:12.534407][**ERROR**] [processOmciMsg][5599]: result=2 sh: write error: Invalid argument [615.221][Platform] 412: Ethernet Link Stats Change Receive: port(eth0.2), state(1) Sorry, rule does not exist. Sorry, rule does not exist. br0: port 2(eth0.2) entered forwarding state br0: port 2(eth0.2) entered forwarding state Sorry, rule does not exist. MQTT Info: Client D84489-Device2-22445J1001433 sending PINGREQ MQTT Info: Client D84489-Device2-22445J1001433 received PINGRESP updateDevBandWidthMac:index=0,d0:bf:9c:26:fa:65 [2026-2-19 Thu 11:44:18.538599][**ERROR**] [processOmciMsg][5599]: result=2 [622.463][cos] 1480: auto FW upgrade start [622.464][cos] 930: auto FW upgrade role check [622.464][cos] 958: auto FW upgrade enable check [622.464][cos] 1537: auto upgrade not enable, skip it [622.464][cos] 1524: force FW upgrade start [622.464][cos] 911: force FW upgrade role check [622.465][cos] 939: force FW upgrade enable check [622.465][cos] 974: force FW upgrade period check [622.465][cos] 1046: force hour 3 current 11 [622.465][cos] 1599: not update at this period, skip it [622.474][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:44:24.542843][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:44:30.547007][**ERROR**] [processOmciMsg][5599]: result=2 [632.718][cos] 2212 - WARN: may have to get HW speed from driver/chip [634.528][Topology] 3644 - ERROR: overrun timeStamp(0) [2026-2-19 Thu 11:44:36.551206][**ERROR**] [processOmciMsg][5599]: result=2 [642.937][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:44:42.555397][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:44:48.559599][**ERROR**] [processOmciMsg][5599]: result=2 sleep 90s! [653.163][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:44:54.563801][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:45:00.568004][**ERROR**] [processOmciMsg][5599]: result=2 [663.387][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:45:06.572206][**ERROR**] [processOmciMsg][5599]: result=2 [673.606][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:45:12.576402][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:45:18.580597][**ERROR**] [processOmciMsg][5599]: result=2 [683.943][cos] 1480: auto FW upgrade start [683.944][cos] 930: auto FW upgrade role check [683.944][cos] 958: auto FW upgrade enable check [683.944][cos] 1537: auto upgrade not enable, skip it [683.944][cos] 1524: force FW upgrade start [683.945][cos] 911: force FW upgrade role check [683.945][cos] 939: force FW upgrade enable check [683.945][cos] 974: force FW upgrade period check [683.945][cos] 1046: force hour 3 current 11 [683.946][cos] 1599: not update at this period, skip it [683.954][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:45:24.584844][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:45:30.589011][**ERROR**] [processOmciMsg][5599]: result=2 [694.207][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:45:36.593203][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:45:42.597403][**ERROR**] [processOmciMsg][5599]: result=2 [704.427][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:45:48.601600][**ERROR**] [processOmciMsg][5599]: result=2 [714.653][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:45:54.605807][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:46:00.609979][**ERROR**] [processOmciMsg][5599]: result=2 [724.877][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:46:06.614188][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:46:12.618402][**ERROR**] [processOmciMsg][5599]: result=2 [735.097][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:46:18.622597][**ERROR**] [processOmciMsg][5599]: result=2 sleep 90s! [745.421][cos] 1480: auto FW upgrade start [745.422][cos] 930: auto FW upgrade role check [745.422][cos] 958: auto FW upgrade enable check [745.422][cos] 1537: auto upgrade not enable, skip it [745.422][cos] 1524: force FW upgrade start [745.423][cos] 911: force FW upgrade role check [745.423][cos] 939: force FW upgrade enable check [745.423][cos] 974: force FW upgrade period check [745.423][cos] 1046: force hour 3 current 11 [745.424][cos] 1599: not update at this period, skip it [745.432][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:46:24.626860][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:46:30.630988][**ERROR**] [processOmciMsg][5599]: result=2 [755.678][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:46:36.635193][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:46:42.639382][**ERROR**] [processOmciMsg][5599]: result=2 [765.897][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:46:48.643585][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:46:54.647786][**ERROR**] [processOmciMsg][5599]: result=2 [776.123][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:47:00.651980][**ERROR**] [processOmciMsg][5599]: result=2 [786.347][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:47:06.656175][**ERROR**] [processOmciMsg][5599]: result=2 [2026-2-19 Thu 11:47:12.660369][**ERROR**] [processOmciMsg][5599]: result=2 [796.567][cos] 2212 - WARN: may have to get HW speed from driver/chip [2026-2-19 Thu 11:47:18.664581][**ERROR**] [processOmciMsg][5599]: result=2