[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.55 (build@16f88ff4d612) (gcc version 12.3.0 (OpenWrt GCC 12.3.0 r23630-842932a63d)) #0 SMP Fri Apr 26 08:55:20 2024 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: PIXLY R2 [ 0.000000] Malformed early option 'earlycon' [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 130624 [ 0.000000] Normal zone: 1280 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130624 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] [c0801400]npu_pkt_buf_addr=9d51b000:9d51b000 [ 0.000000] npu_pkt_buffer memblock_alloc:9d51b000,buf_size=1600000 [ 0.000000] percpu: Embedded 15 pages/cpu s29964 r8192 d23284 u61440 [ 0.000000] pcpu-alloc: s29964 r8192 d23284 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129344 [ 0.000000] Kernel command line: mtdparts=spi_nand:1M(u-boot),-(ubi) ubi.mtd=ubi ubi.block=0,rootfs2 rootfstype=squashfs root=/dev/ubiblock0_5 ethaddr=B0:DD:74:AF:86:40 console=ttyS0,115200n8 earlycon qdma_init=33 serdes_sel=0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 474540K/522496K available (7168K kernel code, 241K rwdata, 1548K rodata, 1024K init, 275K bss, 47956K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 64 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] random: get_random_bytes called from start_kernel+0x2a4/0x3d4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000011] Switching to timer-based delay loop, resolution 40ns [ 0.000105] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.000114] pid_max: default: 32768 minimum: 301 [ 0.000237] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000246] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000857] CPU: Testing write buffer coherency: ok [ 0.001128] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001510] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.001594] rcu: Hierarchical SRCU implementation. [ 0.001729] gic-its@09020000: unable to locate ITS domain [ 0.001923] smp: Bringing up secondary CPUs ... [ 0.016769] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.016799] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016920] smp: Brought up 1 node, 2 CPUs [ 0.016933] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.016938] CPU: All CPU(s) started in SVC mode. [ 0.019355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.019374] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.019495] pinctrl core: initialized pinctrl subsystem [ 0.019785] NET: Registered protocol family 16 [ 0.020042] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.021186] No ATAGs?printk: console [pstore-1] enabled [ 0.118392] pstore: Registered ramoops as persistent store backend [ 0.118471] ramoops: using 0x80000@0x8ff80000, ecc: 16 [ 0.124501] [ 0.124501] l2c_sram_size:0x0 [ 0.127768] Initializing Ecnt Event Netlink Socket [ 0.127948] Initializing Econet Event Netlink Socket nl_sk = (ptrval) [ 0.131219] iommu: Default domain type: Translated [ 0.131467] usbcore: registered new interface driver usbfs [ 0.131572] usbcore: registered new interface driver hub [ 0.131757] usbcore: registered new device driver usb [ 0.132338] NET: Registered protocol family 8 [ 0.132422] NET: Registered protocol family 20 [ 0.132857] clocksource: Switched to clocksource arch_sys_counter [ 0.133443] thermal_sys: Registered thermal governor 'step_wise'NET: Registered protocol family 2 [ 0.134244] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.134414] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.134587] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.134720] TCP: Hash tables configured (established 4096 bind 4096) [ 0.134925] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.135020] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.135292] NET: Registered protocol family 1 [ 0.135396] PCI: CLS 0 bytes, default 64 [ 0.135799] SGMII_Version : A7523.00.01 [ 0.135918] sgmii: pon_sgmii_init [ 0.135992] close! [ 0.136067] sgmii: sgmii_serdes_sel: exit! [ 0.136361] SGMII_Version : A7523.00.01 [ 0.136436] sgmii probe init [ 0.136539] sgmii:int_name: sgmii_pcie0 [ 0.136679] sgmii:int_id: 0 [ 0.136789] sgmii:int_register: inin! [ 0.136866] sgmii:sgmii->pcs1_base= e087b100 [ 0.137039] sgmii:sgmii->pcs2_base= e087da00 [ 0.137115] sgmii:sgmii->an_base= e0901000 [ 0.137189] sgmii:sgmii->ra_base= e0903600 [ 0.137326] sgmii:sgmii->phya_base= e0905c00 [ 0.137400] sgmii:int_register: exit! [ 0.137535] sgmii: init [ 0.137609] sgmii: sgmii_serdes_sel [ 0.137684] sgmii: pcie0: close! [ 0.137758] sgmii: sgmii_serdes_sel: exit! [ 0.137894] sgmii: init_exit [ 0.137966] sgmii probe init exit [ 0.138098] SGMII_Version : A7523.00.01 [ 0.138233] sgmii probe init [ 0.138355] sgmii:int_name: sgmii_pcie1 [ 0.138430] sgmii:int_id: 1 [ 0.138532] sgmii:int_register: inin! [ 0.138669] sgmii:sgmii->pcs1_base= e0907100 [ 0.138743] sgmii:sgmii->pcs2_base= e0909a00 [ 0.138816] sgmii:sgmii->an_base= e090b000 [ 0.138951] sgmii:sgmii->ra_base= e090d600 [ 0.139026] sgmii:sgmii->phya_base= e090fc00 [ 0.139162] sgmii:int_register: exit! [ 0.139234] sgmii: init [ 0.139307] sgmii: sgmii_serdes_sel [ 0.139381] sgmii: pcie1: close! [ 0.139520] sgmii:cmd_wo:reg_t=e090fd44, val=3fff000 [ 0.139594] sgmii: sgmii_serdes_sel: exit! [ 0.139730] sgmii: init_exit [ 0.139802] sgmii probe init exit [ 0.139915] SGMII_Version : A7523.00.01 [ 0.139989] sgmii probe init [ 0.140153] sgmii:int_name: sgmii_usb0 [ 0.140228] sgmii:int_id: 2 [ 0.140322] sgmii:int_register: inin! [ 0.140460] sgmii:sgmii->pcs1_base= e0911100 [ 0.140534] sgmii:sgmii->pcs2_base= e0913a00 [ 0.140607] sgmii:sgmii->an_base= e0915000 [ 0.140744] sgmii:sgmii->ra_base= e0917600 [ 0.140818] sgmii:sgmii->phya_base= e0919c00 [ 0.140892] sgmii:int_register: exit! [ 0.141028] sgmii: init [ 0.141101] sgmii: sgmii_serdes_sel [ 0.141174] sgmii: usb0: close! [ 0.141313] sgmii:cmd_wo:reg_t=e0919d44, val=3fff000 [ 0.141387] sgmii: sgmii_serdes_sel: exit! [ 0.141461] sgmii: init_exit [ 0.141598] sgmii probe init exit [ 0.142696] irq-0: 109 irq-1: 110 [i2c] ecnt_i2c_drv_probe [ 0.143129] [crypto_k] res->name:crypto_k@1fb70000 [ 0.143271] [crypto_k] res->start:0x1fb70000 === [ 0.143346] [crypto_k] res->end:0x1fb70803 === [ 0.143481] [crypto_k] ecnt_crypto_k->base:0xe0975000 [ 0.143860] test_uc:(ptrval) test_c:(ptrval) cpu_top->base:(ptrval) [ 0.144075] [apb_timer] ecnt_timer_drv_probe [ 0.144160] [timer] ecnt_timer->irq: 79 [ 0.144278] [timer] res->name:apb_timer1@1fbf0100 [ 0.144610] [ 0.144610] i2c_slave init(ecnt_i2c_slave_drv_probe) done [ 0.144952] 7523 Thermal Sensor address probe done [ 0.145096] iddq = 44 [ 0.145180] [thermal] thermal_phy->irq: 119 [ 0.145397] [i2s] ecnt_i2s_drv_probe [ 0.146297] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.151307] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.151571] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.182385] io scheduler mq-deadline registered [ 0.182536] io scheduler kyber registered [ 0.183433] en7523-pctl_probe 1fa20210.pinctrl: initialised Airoha EN7523 pinctrl driver [ 0.184173] gpio gpiochip1: (1fbf0270.gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver. [ 0.184626] PCIe driver version: 7523.0.20200910 [ 0.184728] PCIe ref clk init. [ 0.185939] ===EN7523 PCIe initmtk-pcie 1fa91000.pcie: pcie rc 0 linkup success [ 0.544119] mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success [ 0.544257] [ 0.544257] ===============PCIe check===tmp_reg=========81014c3=========== [ 0.544458] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 0.544604] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.544683] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.544825] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.544929] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 [ 0.545370] pci 0000:00:01.0: [14c3:0811] type 01 class 0x060400 [ 0.546499] PCI: bus0: Fast back to back transfers disabled [ 0.546582] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.546731] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.547012] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 [ 0.547435] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 0.547679] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00007fff 64bit] [ 0.547860] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 0.548642] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.548855] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 0.549981] PCI: bus1: Fast back to back transfers disabled [ 0.550063] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.550401] pci 0000:02:00.0: [14c3:7906] type 00 class 0x028000 [ 0.550759] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 0.551003] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00007fff 64bit] [ 0.551248] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 0.551967] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.552242] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 8.000 Gb/s with 5 GT/s x2 link) [ 0.553338] PCI: bus2: Fast back to back transfers disabled [ 0.553423] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.553587] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] [ 0.553731] pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff] [ 0.553812] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 0.554034] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20107fff 64bit] [ 0.554257] pci 0000:01:00.0: BAR 4: assigned [mem 0x20108000-0x20108fff 64bit pref] [ 0.554414] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.554558] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 0.554645] pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref] [ 0.554868] pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20307fff 64bit] [ 0.555089] pci 0000:02:00.0: BAR 4: assigned [mem 0x20308000-0x20308fff 64bit pref] [ 0.555247] pci 0000:00:01.0: PCI bridge to [bus 02] [ 0.555391] pci 0000:00:01.0: bridge window [mem 0x20200000-0x203fffff] [ 0.557576] [ 0.557576] mt7512_pcie_fixup: 0x1438 = 20000015 [ 0.557576] mt7512_pcie_rc0_retrain: 80 = 0141dc12 80 = 01608c12 [ 0.557576] RC0 Link Traing Result: 10120008 [ 0.557576] ===========RC0 set conf space INTx============= [ 1.571835] [ 1.571835] mt7512_pcie_fixup: 0x2438 = 20200015 [ 1.571835] mt7512_pcie_rc1_retrain: 80 = 0141dc22 80 = 01608c12 [ 1.571835] RC1 Link Traing Result: 10120008 [ 1.571835] ===========RC1 set conf space INTx============= [ 2.589013] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.589789] printk: console [ttyS0] disabled [ 2.589925] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 94, base_baud = 115200) is a Airoha 16550 [ 3.761314] printk: console [ttyS0] enabled [ 3.766010] 1fbf0300.serial: ttyS1 at MMIO 0x1fbf0300 (irq = 95, base_baud = 460800) is a Airoha 16550 [ 3.776000] airoha-trng 1faa1000.trng: Airoha Random Generator Probe. [ 3.783682] airoha-trng 1faa1000.trng: Airoha Random Generator finished probe [ 3.797828] brd: module loaded [ 3.805395] loop: module loaded [ 3.808898] en75xx-spi 1fa10000.spi_controller: found spi controller at 0x1fa10000 [ 3.816693] en75xx-spi 1fa10000.spi_controller: found nfi controller at 0x1fa11000 [ 3.824837] spi-nand spi0.0: Winbond SPI NAND was found. [ 3.830297] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 [ 3.838620] 2 cmdlinepart partitions found on MTD device spi_nand [ 3.844857] Creating 2 MTD partitions on "spi_nand": [ 3.849886] 0x000000000000-0x000000100000 : "u-boot" [ 3.856210] 0x000000100000-0x000010000000 : "ubi" [ 4.048786] PPP generic driver version 2.4.2 [ 4.053305] PPP BSD Compression module registered [ 4.058080] PPP Deflate Compression module registered [ 4.063286] NET: Registered protocol family 24 [ 4.067990] USB driver version: 7523.4.20210825 [ 4.074597] port 0 u2_slew_rate_cal_7523 [ 4.080646] FM_OUT value = 107(0x0000006B) [ 4.085812] SR calibration value = 5 [ 4.089449] port 1 u2_slew_rate_cal_7523 [ 4.094517] FM_OUT value = 106(0x0000006A) [ 4.099677] SR calibration value = 5 [ 4.132864] xhci-hcd 1fab0000.xhci: xHCI Host Controller [ 4.138331] xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 [ 4.147941] xhci-hcd 1fab0000.xhci: irq 111, io mem 0x1fab0000 [ 4.154388] hub 1-0:1.0: USB hub found [ 4.158245] hub 1-0:1.0: 2 ports detected [ 4.162687] xhci-hcd 1fab0000.xhci: xHCI Host Controller [ 4.168119] xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 [ 4.175815] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.184416] hub 2-0:1.0: USB hub found [ 4.188266] hub 2-0:1.0: 1 port detected [ 4.192635] usbcore: registered new interface driver cdc_acm [ 4.198459] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.206605] usbcore: registered new interface driver usbserial_generic [ 4.213291] usbserial: USB Serial support registered for generic [ 4.219447] usbcore: registered new interface driver cypress_m8 [ 4.225454] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 4.232813] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 4.240222] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 4.247684] usbcore: registered new interface driver ftdi_sio [ 4.253515] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.261202] watchdog: watchdog@0,0: driver supplied timeout (300) out of range [ 4.268978] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 4.278273] hidraw: raw HID events driver (C) Jiri Kosina [ 4.283876] usbcore: registered new interface driver usbhid [ 4.289584] usbhid: USB HID core driver [ 4.294302] IPv4 over IPsec tunneling driver [ 4.299116] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 4.305650] Initializing XFRM netlink socket [ 4.310380] NET: Registered protocol family 10 [ 4.315901] Segment Routing with IPv6 [ 4.319810] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.326760] NET: Registered protocol family 17 [ 4.331360] NET: Registered protocol family 15 [ 4.336004] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.349114] 8021q: 802.1Q VLAN Support v1.8 [ 4.353491] sctp: Hash tables configured (bind 512/512) [ 4.359023] lib80211: common routines for IEEE802.11 drivers [ 4.364845] lib80211_crypt: registered algorithm 'NULL' [ 4.364849] lib80211_crypt: registered algorithm 'WEP' [ 4.364852] lib80211_crypt: registered algorithm 'CCMP' [ 4.364860] lib80211_crypt: registered algorithm 'TKIP' [ 4.364931] Registering SWP/SWPB emulation handler [ 4.372062] ubi0: attaching mtd1 [ 5.498783] ubi0: scanning is finished [ 5.511887] ubi0: attached mtd1 (name "ubi", size 255 MiB) [ 5.517470] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.524481] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.531336] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.538434] ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0 [ 5.544657] ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128 [ 5.552030] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 572855880 [ 5.561211] ubi0: available PEBs: 287, total reserved PEBs: 1753, PEBs reserved for bad PEB handling: 40 [ 5.570829] ubi0: background thread "ubi_bgt0d" started, PID 65 [ 5.577874] block ubiblock0_5: created from ubi0:5(rootfs2) [ 5.586341] VFS: Mounted root (squashfs filesystem) readonly on device 253:0. [ 5.594686] Freeing unused kernel memory: 1024K [ 5.623039] Run /sbin/init as init process [ 5.912295] init: Console is alive [ 5.916136] init: - watchdog - [ 6.932730] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 6.974430] bootr_en75xx: loading out-of-tree module taints kernel. [ 6.981304] airoha-bootr 1fb00240.bootr: boot reason: POR [ 6.993389] tcledctrl_stub - init [ 7.000735] SCSI subsystem initialized [ 7.011129] libata version 3.00 loaded. [ 7.019273] usbcore: registered new interface driver usb-storage [ 7.031005] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 7.053098] init: - preinit - [ 7.868498] random: jshn: uninitialized urandom read (4 bytes read) [ 8.117815] UBIFS (ubi0:7): Mounting in unauthenticated mode [ 8.141469] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 212 [ 8.164969] random: procd: uninitialized urandom read (4 bytes read) [ 8.166728] UBIFS (ubi0:7): recovery needed [ 8.341052] UBIFS (ubi0:7): recovery completed [ 8.345685] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "overlay2" [ 8.353405] UBIFS (ubi0:7): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.363457] UBIFS (ubi0:7): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 8.373939] UBIFS (ubi0:7): reserved for root: 935592 bytes (913 KiB) [ 8.380508] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID 5ADC94C7-A4AA-4406-BF3F-1E7503023332, small LPT model [ 8.614757] procd: - early - [ 8.617842] procd: - watchdog - [ 8.934825] random: jshn: uninitialized urandom read (4 bytes read) [ 9.068249] random: jshn: uninitialized urandom read (4 bytes read) [ 9.223048] procd: - watchdog - [ 9.228225] procd: - ubus - [ 9.298198] random: ubusd: uninitialized urandom read (4 bytes read) [ 9.310175] procd: - init - [ 9.565778] tccicmd: module license 'unspecified' taints kernel. [ 9.571908] Disabling lock debugging due to kernel taint [ 9.577936] tccicmd V1.1.0.0 (2024:08:01-20:28:01) [ 9.587803] [ 9.587803] SIFMaster 0.1 init [ 9.592605] ===== Interface 0 is ON ===== [ 9.596818] [ 9.596818] Register sifm cmd [ 9.610418] (gdump_mode_sel): GDUMP sel has switch to 3 [ 9.615921] ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215 [ 9.633145] ifc_set_action: cpu:1, nbq:1 [ 9.637185] ifc_set_action: cpu:1, nbq:1 [ 9.641261] ifc_set_action: cpu:1, nbq:2 [ 9.645352] ifc_set_action: cpu:1, nbq:1 [ 9.649359] ifc_set_action: cpu:1, nbq:1 [ 9.653451] ifc_set_action: cpu:1, nbq:1 [ 9.657474] ifc_set_action: cpu:1, nbq:1 [ 9.661487] ifc_set_action: cpu:1, nbq:2 [ 9.665576] ifc_set_action: cpu:1, nbq:2 [ 9.669572] ifc_set_action: cpu:1, nbq:1 [ 9.673614] ifc_set_action: cpu:1, nbq:1 [ 9.677671] ifc_set_action: cpu:1, nbq:1 [ 9.681658] ifc_set_action: cpu:1, nbq:1 [ 9.685731] ifc_set_action: cpu:1, nbq:3 [ 9.689747] ifc_set_action: cpu:1, nbq:1 [ 9.693783] ifc_set_action: cpu:1, nbq:1 [ 9.697877] ifc_set_action: cpu:1, nbq:1 [ 9.701894] ifc_set_action: cpu:1, nbq:1 [ 9.705921] ifc_set_action: cpu:1, nbq:1 [ 9.709994] ifc_set_action: cpu:1, nbq:1 [ 9.714024] ifc_set_action: cpu:1, nbq:7 [ 9.718495] ifc_set_action: cpu:1, nbq:8 [ 9.734695] macType = 0 [ 9.737234] flashQdmaInit = 0x33 [ 9.766554] gpQdmaPriv->hwFwdBuffAddr = 0x1f6f12c0, hwFwdBuffAddr = 0xdf6f12c0 [ 9.826878] copy NPU binary:/lib/firmware/npu_rv32.bin(69384 Bytes) to 0xe0f80000 [ 9.863156] copy NPU binary:/lib/firmware/npu_data.bin(760 Bytes) to 0xe0c00000 [ 10.274843] [c080138c]npu_pkt_buf_addr=9d51b000 [ 10.279461] npu_wifi_offload_get_pkt_buf_addr=9d51b000 [ 10.284817] [c080138c]npu_pkt_buf_addr=9d51b000 [ 10.310607] ether.c:v1.00-NAPI 29.Mar.2015 [ 10.314983] eth0 (uninitialized): netif_napi_add() called with weight 128 [ 10.321906] eth0: FE MAC Ethernet address: B0:DD:74:AF:86:40 [ 10.331388] Use Internal switch ,type 10 [ 10.341121] netlink init [ 10.362124] tcPhyVerLookUp 2400 94A1 [ 10.365997] 7523 Ge, [ 10.368493] , port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9 [ 10.384433] GE Rext AnaCal Done! (5)(0x25) [ 10.389670] GE Rext AnaCal Done! (5)(0x25) [ 10.408179] GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) [ 10.415242] GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) [ 10.434513] GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) [ 10.441498] GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) [ 10.460657] GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) [ 10.467643] GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) [ 10.485938] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 10.492982] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 10.505660] GE Tx offset AnaCal Done! (1)(0x1) [ 10.513551] GE Tx offset AnaCal Done! (1)(0x1) [ 10.526942] GE Tx offset AnaCal Done! (7)(0x26) [ 10.539544] GE Tx offset AnaCal Done! (6)(0x25) [ 10.552962] GE Tx amp AnaCal Done! (3) (0x23) [ 10.562201] GE Tx amp AnaCal Done! (1) (0x1f) [ 10.581607] GE Tx amp AnaCal Done! (12) (0x2c) [ 10.593703] GE Tx amp AnaCal Done! (4) (0x24) [ 10.615477] [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0x0) [ 10.676960] tcPhyVerLookUp 2400 94A1 [ 10.680775] 7523 Ge, [ 10.683284] , port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9 [ 10.704411] GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) [ 10.711455] GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) [ 10.728846] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 10.735886] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 10.754090] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 10.761117] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 10.778342] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 10.785423] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 10.800918] GE Tx offset AnaCal Done! (4)(0x23) [ 10.811653] GE Tx offset AnaCal Done! (4)(0x23) [ 10.822394] GE Tx offset AnaCal Done! (4)(0x23) [ 10.836958] GE Tx offset AnaCal Done! (8)(0x27) [ 10.851261] GE Tx amp AnaCal Done! (4) (0x1c) [ 10.874490] GE Tx amp AnaCal Done! (16) (0x30) [ 10.893945] GE Tx amp AnaCal Done! (12) (0x2c) [ 10.907871] GE Tx amp AnaCal Done! (6) (0x26) [ 10.929719] [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0) [ 10.991344] tcPhyVerLookUp 2400 94A1 [ 10.995177] 7523 Ge, [ 10.997671] , port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9 [ 11.019690] GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) [ 11.026745] GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) [ 11.045069] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 11.052084] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 11.069371] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.076494] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.094627] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 11.101648] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 11.114384] GE Tx offset AnaCal Done! (1)(0x1) [ 11.125883] GE Tx offset AnaCal Done! (5)(0x24) [ 11.136572] GE Tx offset AnaCal Done! (4)(0x23) [ 11.148103] GE Tx offset AnaCal Done! (5)(0x24) [ 11.164163] GE Tx amp AnaCal Done! (6) (0x26) [ 11.179906] GE Tx amp AnaCal Done! (8) (0x28) [ 11.193756] GE Tx amp AnaCal Done! (6) (0x26) [ 11.204853] GE Tx amp AnaCal Done! (3) (0x23) [ 11.226568] [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0) [ 11.288236] tcPhyVerLookUp 2400 94A1 [ 11.291992] 7523 Ge, [ 11.294508] , port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9 [ 11.316663] GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) [ 11.323665] GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) [ 11.341026] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.348092] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.365340] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.372370] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.389623] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.396634] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.413129] GE Tx offset AnaCal Done! (5)(0x24) [ 11.422907] GE Tx offset AnaCal Done! (3)(0x22) [ 11.431822] GE Tx offset AnaCal Done! (2)(0x21) [ 11.444480] GE Tx offset AnaCal Done! (6)(0x25) [ 11.456119] GE Tx amp AnaCal Done! (1) (0x21) [ 11.474622] GE Tx amp AnaCal Done! (11) (0x2b) [ 11.486696] GE Tx amp AnaCal Done! (4) (0x24) [ 11.507104] GE Tx amp AnaCal Done! (13) (0x2d) [ 11.528936] [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) [ 11.595934] macType = 0 [ 11.598461] flashQdmaInit = 0x33 [ 11.605315] gpQdmaPriv->hwFwdBuffAddr = 0x1f2f12c0, hwFwdBuffAddr = 0xdf2f12c0 [ 11.615703] fe resource init start [ 11.639882] whnat_module_init(): module init and register callback for whnat [ 11.647253] mt_wlan_hook_register:46 !!!!! [ 11.651445] mt_wlan_hook_register:50 !!!!! [ 11.655680] mt_wlan_hook_register:53 ops_priority=0 cur_priority=0 !!!!! [ 11.662546] mt_wlan_hook_register:66 !!!!! [ 11.666779] create whnat_ctrl ok!!! [ 11.670477] wed_slot_map_get(): assign slot_id:0 for entry: 0! [ 11.676453] wed_slot_map_get(): assign slot_id:1 for entry: 1! [ 11.692654] Ralink HW NAT Module Enabled [ 11.696982] you need to modify struct FoeEntryExtKernel in soft_dma.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512 [ 11.710889] HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384 [ 11.721928] IP check use Black List [ 11.728974] EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw [ 11.745299] tso_lan: tso_v2.c [201]: dscpDmaAddr =99940000 [ 11.752562] tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 [ 11.757928] tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 [ 11.763390] tso_proc_init. [ 11.775079] eth0: starting interface. [ 11.778840] netif_start_queue [ 12.635189] UBIFS (ubi0:10): Mounting in unauthenticated mode [ 12.658419] UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 1122 [ 12.683838] UBIFS (ubi0:10): recovery needed [ 12.807778] UBIFS (ubi0:10): recovery completed [ 12.812481] UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "container" [ 12.820479] UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 12.830630] UBIFS (ubi0:10): FS size: 103485440 bytes (98 MiB, 815 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 12.841380] UBIFS (ubi0:10): reserved for root: 0 bytes (0 KiB) [ 12.847383] UBIFS (ubi0:10): media format: w4/r0 (latest is w5/r0), UUID 7F184411-8F7A-43A9-8D50-0E6F07D74A7E, small LPT model [ 17.132846] monitor value xxxxxxx [ 17.283397] ecnt_wifi_eeprom: band1 uses art eeprom [ 17.349647] ecnt_wifi_eeprom: Updating macaddr field in /tmp/wifi_band1_eeprom.bin [ 26.498830] kmodloader: loading kernel modules from /etc/modules.d/* [ 26.543398] NET: Registered protocol family 38 [ 26.563797] tun: Universal TUN/TAP device driver, 1.6 [ 26.575180] l2tp_core: L2TP core driver, V2.0 [ 26.581292] l2tp_netlink: L2TP netlink interface [ 26.588257] nat46: module (version 4c5beee236841724219598fabb1edc93d4f08ce5) loaded. [ 26.597905] gre: GRE over IPv4 demultiplexor driver [ 26.607677] ip_gre: GRE over IPv4 tunneling driver [ 26.616561] ip6_gre: GRE over IPv6 tunneling driver [ 26.691890] i2c /dev entries driver [ 26.701646] fuse: init (API version 7.31) [ 26.718587] usbcore: registered new interface driver cdc_wdm [ 26.725382] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f [ 26.733175] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c [ 26.780464] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 26.797030] nf_conntrack_rtsp v0.7 loading [ 26.817005] nf_nat_rtsp v0.7 loading [ 26.837494] usbcore: registered new interface driver pl2303 [ 26.843310] usbserial: USB Serial support registered for pl2303 [ 26.870907] PPP MPPE Compression module registered [ 26.876945] PPTP driver version 0.8.5 [ 26.881970] usbcore: registered new interface driver sierra [ 26.887892] usbserial: USB Serial support registered for Sierra USB modem [ 26.918473] thermal driver version: 7523.3.20210910 ptp_init finished [ 26.981592] xt_time: kernel timezone is -0000 [ 26.986838] usbcore: registered new interface driver cdc_eem [ 26.994015] usbcore: registered new interface driver cdc_ether [ 27.001605] usbcore: registered new interface driver cdc_ncm [ 27.008245] usbcore: registered new interface driver cdc_subset [ 27.193422] usbcore: registered new interface driver huawei_cdc_ncm [ 27.256525] irq: no irq domain found for interrupt-controller ! [ 27.262665] woe_enable_chk:120 error!!! [ 27.267182] -->2) Error 2 opening /etc/woe_disable [ 27.272572] npu_enable_chk:164 error!!! [ 27.277083] npu npu_controller setting [ 27.277083] default open npu 2 opening /etc/npu_enable [ 27.286630] pci 0000:00:00.0: enabling device (0140 -> 0142) [ 27.292973] mt7915e_hif 0000:01:00.0: enabling device (0140 -> 0142) [ 27.300349] irq: no irq domain found for interrupt-controller ! [ 27.306998] woe_enable_chk:120 error!!! [ 27.311180] -->2) Error 2 opening /etc/woe_disable [ 27.316636] npu_enable_chk:164 error!!! [ 27.320814] npu npu_controller setting [ 27.320814] default open npu 2 opening /etc/npu_enable [ 27.330631] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 27.336400] mt7915e 0000:02:00.0: enabling device (0140 -> 0142) [ 27.342726] hostdapt_registe_wifitask 0 [ 27.346645] hostdapt_registe_wifitask 1 [ 27.422874] whnat_driver_init:264 call hook sys up & hif init !!!!! [ 27.429215] whnat_cap_support:83 chip_id=30997 !!!!! [ 27.434315] whnat_cap_support(): chip_id=7915 is in WHNAT support list [ 27.440909] whnat_driver_init(): (efault) whnat is enable !!! [ 27.446793] wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 [ 27.454008] whnat_entry_acquire:106 slot_id = 1 !!!!! [ 27.459185] whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 [ 27.466976] wed_ring_init(): wed ring init result = 0 [ 27.489514] create wed ok!!! [ 27.492527] wdma_init(): wdma(1) base addr=e0b6a400 [ 27.497517] wdma_init(): wdma(1) irq[0]=86 [ 27.501750] wdma_init(): wdma(1) irq[1]=87 [ 27.505924] wdma_init(): wdma(1) irq[2]=88 [ 27.510546] wifi_chip_probe(): Chang CHIP IRQ: 82 to WHNAT IRQ: 90 [ 27.516812] wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 [ 27.524087] wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 [ 27.531421] whnat_probe(): probe fail since whnat is full! [ 27.537080] whnat_dev0: probe of 1fa02000.wed2 failed with error -1 [ 27.544462] whnat_wed_ring_rx_update():614 index=0 val=9768c000 !!! [ 27.550878] whnat_wed_ring_rx_update():614 index=4 val=200 !!! [ 27.556808] whnat_wed_ring_rx_update():614 index=8 val=1ff !!! [ 27.566017] wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 [ 27.570891] =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 [ 27.578097] whnat_hal_wdma_ring_init(): configure ring 0 setting [ 27.584248] whnat_hal_wdma_ring_init(): wed:(ptrval),wdma:(ptrval): 100=0,104=1024,108=0 [ 27.592402] whnat_hal_wdma_ring_init(): configure ring 1 setting [ 27.598541] whnat_hal_wdma_ring_init(): wed:(ptrval),wdma:(ptrval): 110=0,114=1024,118=0 [ 27.606706] whnat_hal_wpdma_ring_init(): configure ring 0 setting [ 27.612936] whnat_hal_wpdma_ring_init(): wed:(ptrval) wifi:(ptrval): d7300=99f68000,d7304=2048,d7308=0 [ 27.622369] whnat_hal_wpdma_ring_init(): configure ring 1 setting [ 27.628553] whnat_hal_wpdma_ring_init(): wed:(ptrval) wifi:(ptrval): d7310=99f70000,d7314=2048,d7318=0 [ 27.673260] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20221215131149a [ 27.673260] [ 27.890139] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20221215131210 [ 27.911911] random: fast init done [ 28.005125] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20221215131256 [ 28.116510] mt7915_mcu_init_firmware:2427 dev_ver=1 recv_id=0 !!! [ 28.123050] chip_type_check:101 open error !!! [ 28.127628] band_calibrated:130 open error !!! [ 28.132134] bbsoc_load_eeprom_from_bin:201 use default!!! [ 28.137688] mt7915e 0000:02:00.0: bbsoc_load_eeprom_from_bin() file_path:/lib/firmware/mediatek/mt7916_eeprom.bin [ 28.148137] mt7915e 0000:02:00.0: load eeprom succesfully from /lib/firmware/mediatek/mt7916_eeprom.bin [ 28.157626] mt7915e 0000:02:00.0: mt7915_eeprom_load flash_mode [ 28.163682] mt7915e 0000:02:00.0: val:0x12 [ 28.167846] mt7915e 0000:02:00.0: e2p matched with mt7916d hw [ 28.181102] npuOffload on mt76 init [ 28.184837] the value of pdev->bus->self->devfn is 8 ,and the band_index is 1 [ 28.192116] DriverModel=2 [ 28.195052] !!!! do phy and virtual address mapping [ 28.201311] the addr of NCounter2G_Base is e177c0e4 [ 28.207392] dramBaEntry_pa=96600000 [ 28.211078] wifi_offload_init_npu:169 mt7916d device !!! [ 28.271907] WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020 [ 28.277816] WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000 [ 28.288669] usbcore: registered new interface driver option [ 28.294445] usbserial: USB Serial support registered for GSM modem (1-port) [ 28.304190] usbcore: registered new interface driver qmi_wwan [ 28.311186] usbcore: registered new interface driver sierra_net [ 28.318629] usbcore: registered new interface driver cdc_mbim [ 28.325326] kmodloader: done loading kernel modules from /etc/modules.d/* [ 29.254051] get bob info from flash [ 29.256773] chmod bob_info attribute. [ 37.872883] random: crng init done [ 37.872893] random: 5 urandom warning(s) missed due to ratelimiting [ 44.850867] basicParameter = 0x4 [ 44.850875] tokenRate = 0x989680 [ 44.850878] bucketSize_shift = 0xc [ 44.851026] idx value error, correct range: 0-5 [ 44.851026] ,real idx :6idx value error, correct range: 0-5 [ 44.851026] ,real idx :7qos_wrr_info: 0 0 0 0 0 [ 44.851286] QDMA QoS: HW SP [ 44.851713] [ 44.851713] ether qos gQueueMask is 0xff [ 45.624642] br-lan: port 1(eth0.1) entered blocking state [ 45.624649] br-lan: port 1(eth0.1) entered disabled state [ 45.624857] device eth0.1 entered promiscuous mode [ 45.628556] br-lan: port 2(eth0.2) entered blocking state [ 45.628563] br-lan: port 2(eth0.2) entered disabled state [ 45.628766] device eth0.2 entered promiscuous mode [ 45.632580] br-lan: port 3(nas10) entered blocking state [ 45.632587] br-lan: port 3(nas10) entered disabled state [ 45.632797] device nas10 entered promiscuous mode [ 48.207385] br-lan: port 1(eth0.1) entered blocking state [ 48.207395] br-lan: port 1(eth0.1) entered forwarding state [ 48.207669] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 48.401538] device eth0.1 left promiscuous mode [ 48.401638] br-lan: port 1(eth0.1) entered disabled state [ 48.647677] mt7915_mcu_set_sku_en: enable = 1 [ 48.987710] br-lan: port 1(wlan0_0) entered blocking state [ 48.987717] br-lan: port 1(wlan0_0) entered disabled state [ 48.987921] device wlan0_0 entered promiscuous mode [ 48.988008] br-lan: port 1(wlan0_0) entered blocking state [ 48.988014] br-lan: port 1(wlan0_0) entered forwarding state [ 49.143778] mt7915_mcu_set_sku_en: enable = 1 [ 49.915962] br-lan: port 4(wlan1_0) entered blocking state [ 49.915975] br-lan: port 4(wlan1_0) entered disabled state [ 49.916238] device wlan1_0 entered promiscuous mode [ 49.916336] br-lan: port 4(wlan1_0) entered blocking state [ 49.916341] br-lan: port 4(wlan1_0) entered forwarding state [ 49.918368] br-lan: port 1(wlan0_0) entered disabled state [ 49.918699] br-lan: port 4(wlan1_0) entered disabled state [ 53.333479] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0_0: link becomes ready [ 53.333644] br-lan: port 1(wlan0_0) entered blocking state [ 53.333651] br-lan: port 1(wlan0_0) entered forwarding state [ 54.730571] uledd: v1.0.1 started. [ 57.243568] block ubiblock0_4: created from ubi0:4(rootfs1) [ 57.263756] /dev/ubiblock0_4: Can't open blockdev [ 57.985242] /dev/ubiblock0_4: Can't open blockdev [ 70.950821] br-lan: port 5(eth0.1) entered blocking state [ 70.950829] br-lan: port 5(eth0.1) entered disabled state [ 70.951112] device eth0.1 entered promiscuous mode [ 70.951215] br-lan: port 5(eth0.1) entered blocking state [ 70.951221] br-lan: port 5(eth0.1) entered forwarding state [ 114.596243] EXT4-fs (loop0): VFS: Can't find ext4 filesystem [ 114.596405] EXT4-fs (loop0): VFS: Can't find ext4 filesystem [ 114.596476] EXT2-fs (loop0): error: can't find an ext2 filesystem on dev loop0. [ 200.711950] WARNING! power/level is deprecated; use power/control instead