[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.55 (build@67ad6012f9fd) (gcc version 12.3.0 (OpenWrt GCC 12.3.0 r23630-842932a63d)) #0 SMP Fri Apr 26 08:55:20 2024 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RODIMUS R1 [ 0.000000] Malformed early option 'earlycon' [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 130624 [ 0.000000] Normal zone: 1280 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130624 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] [c0801400]npu_pkt_buf_addr=9d4fc000:9d4fc000 [ 0.000000] npu_pkt_buffer memblock_alloc:9d4fc000,buf_size=1600000 [ 0.000000] percpu: Embedded 15 pages/cpu s29964 r8192 d23284 u61440 [ 0.000000] pcpu-alloc: s29964 r8192 d23284 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129344 [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlycon qdma_init=33 serdes_sel=1 mtdparts=spi_nand:1M(u-boot),-(ubi) ubi.mtd=ubi ubi.block=0,rootfs2 rootfstype=squashfs root=/dev/ubiblock0_5 ethddr=B0:DD:74:AC:E5:F0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 474488K/522496K available (7168K kernel code, 241K rwdata, 1548K rodata, 1024K init, 275K bss, 48008K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 64 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] random: get_random_bytes called from start_kernel+0x2a4/0x3d4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000011] Switching to timer-based delay loop, resolution 40ns [ 0.000141] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.000150] pid_max: default: 32768 minimum: 301 [ 0.000273] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000282] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000895] CPU: Testing write buffer coherency: ok [ 0.001163] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001542] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.001630] rcu: Hierarchical SRCU implementation. [ 0.001763] gic-its@09020000: unable to locate ITS domain [ 0.001982] smp: Bringing up secondary CPUs ... [ 0.016822] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.016851] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016979] smp: Brought up 1 node, 2 CPUs [ 0.016992] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.016997] CPU: All CPU(s) started in SVC mode. [ 0.020484] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020504] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.020628] pinctrl core: initialized pinctrl subsystem [ 0.020922] NET: Registered protocol family 16 [ 0.021176] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.022305] No ATAGs?ramoops: uncorrectable error in header [ 0.022893] ramoops: uncorrectable error in header [ 0.022983] ramoops: uncorrectable error in header [ 0.023047] ramoops: uncorrectable error in header [ 0.029692] printk: console [pstore-1] enabled [ 0.029909] pstore: Registered ramoops as persistent store backend [ 0.029986] ramoops: using 0x80000@0x8ff80000, ecc: 16 [ 0.035888] [ 0.035888] l2c_sram_size:0x0 [ 0.039218] Initializing Ecnt Event Netlink Socket [ 0.039324] Initializing Econet Event Netlink Socket nl_sk = (ptrval) [ 0.043114] iommu: Default domain type: Translated [ 0.043285] usbcore: registered new interface driver usbfs [ 0.043449] usbcore: registered new interface driver hub [ 0.043564] usbcore: registered new device driver usb [ 0.044198] NET: Registered protocol family 8 [ 0.044284] NET: Registered protocol family 20 [ 0.044670] clocksource: Switched to clocksource arch_sys_counter [ 0.045301] thermal_sys: Registered thermal governor 'step_wise'NET: Registered protocol family 2 [ 0.046125] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.046297] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.046407] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.046604] TCP: Hash tables configured (established 4096 bind 4096) [ 0.046746] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.046942] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.047236] NET: Registered protocol family 1 [ 0.047333] PCI: CLS 0 bytes, default 64 [ 0.047684] SGMII_Version : A7523.00.01 [ 0.047862] sgmii: pon_sgmii_init [ 0.047937] enable! [ 0.048012] sgmii: sgmii_serdes_sel: exit! [ 0.048306] SGMII_Version : A7523.00.01 [ 0.048382] sgmii probe init [ 0.048483] sgmii:int_name: sgmii_pcie0 [ 0.048560] sgmii:int_id: 0 [ 0.048738] sgmii:int_register: inin! [ 0.048814] sgmii:sgmii->pcs1_base= e087b100 [ 0.048888] sgmii:sgmii->pcs2_base= e087da00 [ 0.049025] sgmii:sgmii->an_base= e0901000 [ 0.049100] sgmii:sgmii->ra_base= e0903600 [ 0.049235] sgmii:sgmii->phya_base= e0905c00 [ 0.049309] sgmii:int_register: exit! [ 0.049382] sgmii: init [ 0.049456] sgmii: sgmii_serdes_sel [ 0.049592] sgmii: pcie0: close! [ 0.049666] sgmii: sgmii_serdes_sel: exit! [ 0.049739] sgmii: init_exit [ 0.049876] sgmii probe init exit [ 0.049995] SGMII_Version : A7523.00.01 [ 0.050069] sgmii probe init [ 0.050230] sgmii:int_name: sgmii_pcie1 [ 0.050305] sgmii:int_id: 1 [ 0.050403] sgmii:int_register: inin! [ 0.050477] sgmii:sgmii->pcs1_base= e0907100 [ 0.050613] sgmii:sgmii->pcs2_base= e0909a00 [ 0.050686] sgmii:sgmii->an_base= e090b000 [ 0.050824] sgmii:sgmii->ra_base= e090d600 [ 0.050898] sgmii:sgmii->phya_base= e090fc00 [ 0.050971] sgmii:int_register: exit! [ 0.051106] sgmii: init [ 0.051179] sgmii: sgmii_serdes_sel [ 0.051253] sgmii: pcie1: close! [ 0.051329] sgmii:cmd_wo:reg_t=e090fd44, val=3fff000 [ 0.051467] sgmii: sgmii_serdes_sel: exit! [ 0.051541] sgmii: init_exit [ 0.051616] sgmii probe init exit [ 0.051787] SGMII_Version : A7523.00.01 [ 0.051861] sgmii probe init [ 0.051958] sgmii:int_name: sgmii_usb0 [ 0.052095] sgmii:int_id: 2 [ 0.052187] sgmii:int_register: inin! [ 0.052261] sgmii:sgmii->pcs1_base= e0911100 [ 0.052398] sgmii:sgmii->pcs2_base= e0913a00 [ 0.052472] sgmii:sgmii->an_base= e0915000 [ 0.052545] sgmii:sgmii->ra_base= e0917600 [ 0.052682] sgmii:sgmii->phya_base= e0919c00 [ 0.052755] sgmii:int_register: exit! [ 0.052828] sgmii: init [ 0.052965] sgmii: sgmii_serdes_sel [ 0.053039] sgmii: usb0: close! [ 0.053114] sgmii:cmd_wo:reg_t=e0919d44, val=3fff000 [ 0.053252] sgmii: sgmii_serdes_sel: exit! [ 0.053326] sgmii: init_exit [ 0.053399] sgmii probe init exit [ 0.054544] irq-0: 108 irq-1: 109 [i2c] ecnt_i2c_drv_probe [ 0.054995] [crypto_k] res->name:crypto_k@1fb70000 [ 0.055074] [crypto_k] res->start:0x1fb70000 === [ 0.055212] [crypto_k] res->end:0x1fb70803 === [ 0.055286] [crypto_k] ecnt_crypto_k->base:0xe0975000 [ 0.055730] test_uc:(ptrval) test_c:(ptrval) cpu_top->base:(ptrval) [ 0.055882] [apb_timer] ecnt_timer_drv_probe [ 0.056029] [timer] ecnt_timer->irq: 79 [ 0.056148] [timer] res->name:apb_timer1@1fbf0100 [ 0.056418] [ 0.056418] i2c_slave init(ecnt_i2c_slave_drv_probe) done [ 0.056801] 7523 Thermal Sensor address probe done [ 0.056882] iddq = 35 [ 0.057029] [thermal] thermal_phy->irq: 118 [ 0.057245] [i2s] ecnt_i2s_drv_probe [ 0.058060] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.063165] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.063361] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.094256] io scheduler mq-deadline registered [ 0.094344] io scheduler kyber registered [ 0.095320] en7523-pctl_probe 1fa20210.pinctrl: initialised Airoha EN7523 pinctrl driver [ 0.095979] gpio gpiochip1: (1fbf0270.gpio): detected irqchip that is shared with multiple gpiochips: please fix the driver. [ 0.096420] PCIe driver version: 7523.0.20200910 [ 0.096580] PCIe ref clk init. [ 0.097795] ===EN7523 PCIe initmtk-pcie 1fa91000.pcie: pcie rc 0 linkup success [ 0.455970] mtk-pcie 1fa91000.pcie: pcie rc 1 linkup success [ 0.456045] [ 0.456045] ===============PCIe check===tmp_reg=========81014c3=========== [ 0.456297] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 0.456379] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.456520] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 0.456660] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.456763] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 [ 0.457232] pci 0000:00:01.0: [14c3:0811] type 01 class 0x060400 [ 0.458720] PCI: bus0: Fast back to back transfers disabled [ 0.458868] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.458953] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.459300] pci 0000:01:00.0: [14c3:7915] type 00 class 0x000280 [ 0.459726] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 0.459908] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] [ 0.460153] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 0.460934] pci 0000:01:00.0: supports D1 D2 [ 0.461012] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.461286] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 0.462856] PCI: bus1: Fast back to back transfers disabled [ 0.462941] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.463290] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280 [ 0.463649] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 0.463893] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] [ 0.464137] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 0.464895] pci 0000:02:00.0: supports D1 D2 [ 0.465037] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.465250] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 0.466903] PCI: bus2: Fast back to back transfers disabled [ 0.466989] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.467152] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff] [ 0.467232] pci 0000:00:01.0: BAR 8: assigned [mem 0x20200000-0x203fffff] [ 0.467377] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 0.467600] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref] [ 0.467759] pci 0000:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref] [ 0.467980] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.468061] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 0.468211] pci 0000:02:00.0: BAR 0: assigned [mem 0x20200000-0x202fffff 64bit pref] [ 0.468434] pci 0000:02:00.0: BAR 2: assigned [mem 0x20300000-0x20303fff 64bit pref] [ 0.468593] pci 0000:02:00.0: BAR 4: assigned [mem 0x20304000-0x20304fff 64bit pref] [ 0.468814] pci 0000:00:01.0: PCI bridge to [bus 02] [ 0.468895] pci 0000:00:01.0: bridge window [mem 0x20200000-0x203fffff] [ 0.471144] [ 0.471144] mt7512_pcie_fixup: 0x1438 = 20000015 [ 0.471144] mt7512_pcie_rc0_retrain: 80 = 0145dc12 80 = 01608c12 [ 0.471144] RC0 Link Traing Result: 10120008 [ 0.471144] ===========RC0 set conf space INTx============= [ 1.485394] [ 1.485394] mt7512_pcie_fixup: 0x2438 = 20200015 [ 1.485394] mt7512_pcie_rc1_retrain: 80 = 0145dc12 80 = 01608c12 [ 1.485394] RC1 Link Traing Result: 10120008 [ 1.485394] ===========RC1 set conf space INTx============= [ 2.502560] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.503276] printk: console [ttyS0] disabled [ 2.503475] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 94, base_baud = 115200) is a Airoha 16550 [ 3.704871] printk: console [ttyS0] enabled [ 3.709698] airoha-trng 1faa1000.trng: Airoha Random Generator Probe. [ 3.717406] airoha-trng 1faa1000.trng: Airoha Random Generator finished probe [ 3.731556] brd: module loaded [ 3.739138] loop: module loaded [ 3.742635] en75xx-spi 1fa10000.spi_controller: found spi controller at 0x1fa10000 [ 3.750363] en75xx-spi 1fa10000.spi_controller: found nfi controller at 0x1fa11000 [ 3.758557] spi-nand spi0.0: Winbond SPI NAND was found. [ 3.764013] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 [ 3.772338] 2 cmdlinepart partitions found on MTD device spi_nand [ 3.778577] Creating 2 MTD partitions on "spi_nand": [ 3.783607] 0x000000000000-0x000000100000 : "u-boot" [ 3.789922] 0x000000100000-0x000010000000 : "ubi" [ 3.982511] PPP generic driver version 2.4.2 [ 3.987023] PPP BSD Compression module registered [ 3.991791] PPP Deflate Compression module registered [ 3.996933] NET: Registered protocol family 24 [ 4.001708] USB driver version: 7523.4.20210825 [ 4.008335] port 0 u2_slew_rate_cal_7523 [ 4.014381] FM_OUT value = 107(0x0000006B) [ 4.019550] SR calibration value = 5 [ 4.023186] port 1 u2_slew_rate_cal_7523 [ 4.028241] FM_OUT value = 107(0x0000006B) [ 4.033405] SR calibration value = 5 [ 4.064673] xhci-hcd 1fab0000.xhci: xHCI Host Controller [ 4.070141] xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 1 [ 4.079752] xhci-hcd 1fab0000.xhci: irq 110, io mem 0x1fab0000 [ 4.086202] hub 1-0:1.0: USB hub found [ 4.090056] hub 1-0:1.0: 2 ports detected [ 4.094503] xhci-hcd 1fab0000.xhci: xHCI Host Controller [ 4.099937] xhci-hcd 1fab0000.xhci: new USB bus registered, assigned bus number 2 [ 4.107660] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.116224] hub 2-0:1.0: USB hub found [ 4.120140] hub 2-0:1.0: 1 port detected [ 4.124497] usbcore: registered new interface driver cdc_acm [ 4.130323] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.138465] usbcore: registered new interface driver usbserial_generic [ 4.145148] usbserial: USB Serial support registered for generic [ 4.151235] usbcore: registered new interface driver cypress_m8 [ 4.157306] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 4.164686] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 4.172069] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 4.179535] usbcore: registered new interface driver ftdi_sio [ 4.185368] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.193111] watchdog: watchdog@0,0: driver supplied timeout (300) out of range [ 4.200869] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 4.209943] hidraw: raw HID events driver (C) Jiri Kosina [ 4.215606] usbcore: registered new interface driver usbhid [ 4.221244] usbhid: USB HID core driver [ 4.226031] IPv4 over IPsec tunneling driver [ 4.230853] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 4.237401] Initializing XFRM netlink socket [ 4.242125] NET: Registered protocol family 10 [ 4.247530] Segment Routing with IPv6 [ 4.251512] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.258433] NET: Registered protocol family 17 [ 4.263041] NET: Registered protocol family 15 [ 4.267645] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.280752] 8021q: 802.1Q VLAN Support v1.8 [ 4.285129] sctp: Hash tables configured (bind 512/512) [ 4.290666] lib80211: common routines for IEEE802.11 drivers [ 4.296476] lib80211_crypt: registered algorithm 'NULL' [ 4.296479] lib80211_crypt: registered algorithm 'WEP' [ 4.296481] lib80211_crypt: registered algorithm 'CCMP' [ 4.296484] lib80211_crypt: registered algorithm 'TKIP' [ 4.296555] Registering SWP/SWPB emulation handler [ 4.303661] ubi0: attaching mtd1 [ 4.534907] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 4.754891] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0, ep_type 3, maxp 10, interval 8, burst 0, mult 0, ep 0xdcd546c0, ep_ctx 0xe122d080 [ 4.754897] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1 [ 4.754899] [DBG] BOFFSET: 0, BREPEAT: 0 [ 4.754931] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 0, isTT 0, ep_type 2, maxp 64, interval 1, burst 0, mult 0, ep 0xdcd546f8, ep_ctx 0xe122d0a0 [ 4.754934] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1 [ 4.754936] [DBG] BOFFSET: 0, BREPEAT: 0 [ 4.754957] add_ep parameters: rh_port_num 2, dev_speed 2, is_in 1, isTT 0, ep_type 2, maxp 64, interval 1, burst 0, mult 0, ep 0xdcd54730, ep_ctx 0xe122d100 [ 4.754960] [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1 [ 4.754962] [DBG] BOFFSET: 0, BREPEAT: 0 [ 5.439094] ubi0: scanning is finished [ 5.452133] ubi0: attached mtd1 (name "ubi", size 255 MiB) [ 5.457791] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.464746] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.471662] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.478697] ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0 [ 5.484923] ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128 [ 5.492365] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2036692917 [ 5.501571] ubi0: available PEBs: 243, total reserved PEBs: 1797, PEBs reserved for bad PEB handling: 40 [ 5.511561] ubi0: background thread "ubi_bgt0d" started, PID 65 [ 5.521375] block ubiblock0_5: created from ubi0:5(rootfs2) [ 5.529606] VFS: Mounted root (squashfs filesystem) readonly on device 253:0. [ 5.538014] Freeing unused kernel memory: 1024K [ 5.564842] Run /sbin/init as init process [ 5.863474] init: Console is alive [ 5.867244] init: - watchdog - [ 7.095153] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 7.131345] bootr_en75xx: loading out-of-tree module taints kernel. [ 7.138163] airoha-bootr 1fb00240.bootr: boot reason: POR [ 7.147752] tcledctrl_stub - init [ 7.155210] SCSI subsystem initialized [ 7.165673] libata version 3.00 loaded. [ 7.173836] usbcore: registered new interface driver usb-storage [ 7.180700] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 7.204883] init: - preinit - [ 8.158019] random: jshn: uninitialized urandom read (4 bytes read) [ 8.411323] random: procd: uninitialized urandom read (4 bytes read) [ 8.415423] UBIFS (ubi0:7): Mounting in unauthenticated mode [ 8.441003] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 213 [ 8.466099] UBIFS (ubi0:7): recovery needed [ 8.607340] UBIFS (ubi0:7): recovery completed [ 8.611962] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "overlay2" [ 8.619674] UBIFS (ubi0:7): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.629664] UBIFS (ubi0:7): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 8.640086] UBIFS (ubi0:7): reserved for root: 935592 bytes (913 KiB) [ 8.646661] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID 7E57502C-F3A2-4D14-8605-A676EEE766A0, small LPT model [ 8.876279] procd: - early - [ 8.879361] procd: - watchdog - [ 9.266214] random: jshn: uninitialized urandom read (4 bytes read) [ 9.407511] random: jshn: uninitialized urandom read (4 bytes read) [ 9.474839] procd: - watchdog - [ 9.479309] procd: - ubus - [ 9.531605] random: jshn: uninitialized urandom read (4 bytes read) [ 9.591271] procd: - init - [ 9.862888] tccicmd: module license 'unspecified' taints kernel. [ 9.869037] Disabling lock debugging due to kernel taint [ 9.875162] tccicmd V1.1.0.0 (2024:09:10-11:49:59) [ 9.884782] [ 9.884782] SIFMaster 0.1 init [ 9.889635] ===== Interface 0 is ON ===== [ 9.893743] [ 9.893743] Register sifm cmd [ 9.907256] (gdump_mode_sel): GDUMP sel has switch to 3 [ 9.912653] ECNT_HOOK_ERROR occur. ECNT_API_XPON_MODE_GET:215 [ 9.935135] ifc_set_action: cpu:1, nbq:1 [ 9.939149] ifc_set_action: cpu:1, nbq:1 [ 9.943163] ifc_set_action: cpu:1, nbq:2 [ 9.947287] ifc_set_action: cpu:1, nbq:1 [ 9.951314] ifc_set_action: cpu:1, nbq:1 [ 9.955357] ifc_set_action: cpu:1, nbq:1 [ 9.959422] ifc_set_action: cpu:1, nbq:1 [ 9.963421] ifc_set_action: cpu:1, nbq:2 [ 9.967464] ifc_set_action: cpu:1, nbq:2 [ 9.971542] ifc_set_action: cpu:1, nbq:1 [ 9.975552] ifc_set_action: cpu:1, nbq:1 [ 9.979546] ifc_set_action: cpu:1, nbq:1 [ 9.983601] ifc_set_action: cpu:1, nbq:1 [ 9.987654] ifc_set_action: cpu:1, nbq:3 [ 9.991662] ifc_set_action: cpu:1, nbq:1 [ 9.995780] ifc_set_action: cpu:1, nbq:1 [ 9.999783] ifc_set_action: cpu:1, nbq:1 [ 10.003776] ifc_set_action: cpu:1, nbq:1 [ 10.007900] ifc_set_action: cpu:1, nbq:1 [ 10.011903] ifc_set_action: cpu:1, nbq:1 [ 10.015916] ifc_set_action: cpu:1, nbq:7 [ 10.020385] ifc_set_action: cpu:1, nbq:8 [ 10.040855] macType = 0 [ 10.043404] flashQdmaInit = 0x33 [ 10.072569] gpQdmaPriv->hwFwdBuffAddr = 0x1f6ec100, hwFwdBuffAddr = 0xdf6ec100 [ 10.141779] copy NPU binary:/lib/firmware/npu_rv32.bin(69384 Bytes) to 0xe0f80000 [ 10.192409] copy NPU binary:/lib/firmware/npu_data.bin(760 Bytes) to 0xe0c00000 [ 10.604098] [c080138c]npu_pkt_buf_addr=9d4fc000 [ 10.608770] npu_wifi_offload_get_pkt_buf_addr=9d4fc000 [ 10.613994] [c080138c]npu_pkt_buf_addr=9d4fc000 [ 10.639932] ether.c:v1.00-NAPI 29.Mar.2015 [ 10.644179] eth0 (uninitialized): netif_napi_add() called with weight 128 [ 10.651275] eth0: FE MAC Ethernet address: 00:AA:BB:01:23:40 [ 10.660600] Use Internal switch ,type 10 [ 10.670487] netlink init [ 10.683501] tcPhyVerLookUp 2400 94A1 [ 10.687356] 7523 Ge, [ 10.689851] , port_num = 0, ephy_addr = 9, ephy_addr_base = 0x9 [ 10.707895] GE Rext AnaCal Done! (7)(0x27) [ 10.713093] GE Rext AnaCal Done! (7)(0x27) [ 10.730836] GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) [ 10.737833] GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) [ 10.756128] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 10.763156] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 10.781277] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 10.788335] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 10.806564] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 10.813539] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 10.827233] GE Tx offset AnaCal Done! (2)(0x2) [ 10.837859] GE Tx offset AnaCal Done! (4)(0x23) [ 10.846747] GE Tx offset AnaCal Done! (2)(0x21) [ 10.855605] GE Tx offset AnaCal Done! (2)(0x21) [ 10.870015] GE Tx amp AnaCal Done! (4) (0x1c) [ 10.884820] GE Tx amp AnaCal Done! (7) (0x27) [ 10.895857] GE Tx amp AnaCal Done! (3) (0x23) [ 10.906006] GE Tx amp AnaCal Done! (2) (0x1e) [ 10.927753] [tcPhyInit] in [tcPhyInit] out , r31 = (9, 0x0) [ 10.989355] tcPhyVerLookUp 2400 94A1 [ 10.993126] 7523 Ge, [ 10.995693] , port_num = 1, ephy_addr = 10, ephy_addr_base = 0x9 [ 11.017769] GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) [ 11.024747] GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) [ 11.042098] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.049197] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.067310] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 11.074348] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 11.093483] GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) [ 11.100502] GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) [ 11.116207] GE Tx offset AnaCal Done! (4)(0x23) [ 11.126000] GE Tx offset AnaCal Done! (3)(0x22) [ 11.134892] GE Tx offset AnaCal Done! (2)(0x21) [ 11.144672] GE Tx offset AnaCal Done! (3)(0x22) [ 11.159976] GE Tx amp AnaCal Done! (5) (0x1b) [ 11.183066] GE Tx amp AnaCal Done! (16) (0x30) [ 11.195223] GE Tx amp AnaCal Done! (4) (0x24) [ 11.211856] GE Tx amp AnaCal Done! (9) (0x29) [ 11.233611] [tcPhyInit] in [tcPhyInit] out , r31 = (10, 0x0) [ 11.295292] tcPhyVerLookUp 2400 94A1 [ 11.299033] 7523 Ge, [ 11.301561] , port_num = 2, ephy_addr = 11, ephy_addr_base = 0x9 [ 11.324603] GE R45 AnaCal zcal_idx(before table) (dec: 44) (hex: 0x2c) [ 11.331664] GE R45 AnaCal Done! (cnt:12)(after table) ([7][6:0]:0x53) ([6:0]:0xd3) [ 11.350854] GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) [ 11.357928] GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) [ 11.377136] GE R45 AnaCal zcal_idx(before table) (dec: 42) (hex: 0x2a) [ 11.384102] GE R45 AnaCal Done! (cnt:10)(after table) ([7][6:0]:0x58) ([6:0]:0xd8) [ 11.402437] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 11.409434] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 11.423117] GE Tx offset AnaCal Done! (2)(0x21) [ 11.433978] GE Tx offset AnaCal Done! (4)(0x23) [ 11.442822] GE Tx offset AnaCal Done! (2)(0x21) [ 11.455424] GE Tx offset AnaCal Done! (6)(0x25) [ 11.472613] GE Tx amp AnaCal Done! (7) (0x27) [ 11.485579] GE Tx amp AnaCal Done! (5) (0x25) [ 11.497671] GE Tx amp AnaCal Done! (4) (0x24) [ 11.518964] GE Tx amp AnaCal Done! (14) (0x2e) [ 11.540847] [tcPhyInit] in [tcPhyInit] out , r31 = (11, 0x0) [ 11.602425] tcPhyVerLookUp 2400 94A1 [ 11.606198] 7523 Ge, [ 11.608817] , port_num = 3, ephy_addr = 12, ephy_addr_base = 0x9 [ 11.630913] GE R45 AnaCal zcal_idx(before table) (dec: 43) (hex: 0x2b) [ 11.637994] GE R45 AnaCal Done! (cnt:11)(after table) ([7][6:0]:0x56) ([6:0]:0xd6) [ 11.656195] GE R45 AnaCal zcal_idx(before table) (dec: 41) (hex: 0x29) [ 11.663227] GE R45 AnaCal Done! (cnt:9)(after table) ([7][6:0]:0x5b) ([6:0]:0xdb) [ 11.680485] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.687466] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.704604] GE R45 AnaCal zcal_idx(before table) (dec: 40) (hex: 0x28) [ 11.711629] GE R45 AnaCal Done! (cnt:8)(after table) ([7][6:0]:0x5e) ([6:0]:0xde) [ 11.727911] GE Tx offset AnaCal Done! (5)(0x24) [ 11.740501] GE Tx offset AnaCal Done! (6)(0x25) [ 11.751228] GE Tx offset AnaCal Done! (4)(0x23) [ 11.759215] GE Tx offset AnaCal Done! (1)(0x1) [ 11.772518] GE Tx amp AnaCal Done! (3) (0x1d) [ 11.781734] GE Tx amp AnaCal Done! (1) (0x1f) [ 11.795710] GE Tx amp AnaCal Done! (6) (0x26) [ 11.804930] GE Tx amp AnaCal Done! (1) (0x21) [ 11.826736] [tcPhyInit] in [tcPhyInit] out , r31 = (12, 0x0) [ 11.904346] macType = 0 [ 11.906948] flashQdmaInit = 0x33 [ 11.914134] gpQdmaPriv->hwFwdBuffAddr = 0x1f2ec100, hwFwdBuffAddr = 0xdf2ec100 [ 11.924901] fe resource init start [ 11.941705] whnat_module_init(): module init and register callback for whnat [ 11.948911] mt_wlan_hook_register:46 !!!!! [ 11.953173] mt_wlan_hook_register:50 !!!!! [ 11.957385] mt_wlan_hook_register:53 ops_priority=0 cur_priority=0 !!!!! [ 11.964301] mt_wlan_hook_register:66 !!!!! [ 11.968522] create whnat_ctrl ok!!! [ 11.972196] wed_slot_map_get(): assign slot_id:0 for entry: 0! [ 11.978341] wed_slot_map_get(): assign slot_id:1 for entry: 1! [ 11.996884] Ralink HW NAT Module Enabled [ 12.003101] you need to modify struct FoeEntryExtKernel in soft_dma.h when you modifyied struct FoeEntryExt!SRAM_FOE_NUM=7, means PPE_FOE_NUM=512 [ 12.016494] HWNAT Module enabled with Type:L2B/IPv4/IPv6/DS-LITE/6RD, foeSize:64B, sram_foeNum:512, dram_foeNum:16384 [ 12.028100] IP check use Black List [ 12.034992] EN7523 PPE SRAM HW default setting is 512 at 64byte, no need to set by sw [ 12.056893] tso_lan: tso_v2.c [201]: dscpDmaAddr =99710000 [ 12.064192] tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 [ 12.069641] tso_lan: tso_v2.c [263]: diPtr->dscpIdx = 0 [ 12.075040] tso_proc_init. [ 12.086450] eth0: starting interface. [ 12.090308] netif_start_queue [ 12.969102] UBIFS (ubi0:10): Mounting in unauthenticated mode [ 12.992283] UBIFS (ubi0:10): background thread "ubifs_bgt0_10" started, PID 1150 [ 13.017691] UBIFS (ubi0:10): recovery needed [ 13.145176] UBIFS (ubi0:10): recovery completed [ 13.149909] UBIFS (ubi0:10): UBIFS: mounted UBI device 0, volume 10, name "container" [ 13.157882] UBIFS (ubi0:10): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 13.167955] UBIFS (ubi0:10): FS size: 103485440 bytes (98 MiB, 815 LEBs), journal size 5206016 bytes (4 MiB, 41 LEBs) [ 13.178700] UBIFS (ubi0:10): reserved for root: 4887873 bytes (4773 KiB) [ 13.185541] UBIFS (ubi0:10): media format: w5/r0 (latest is w5/r0), UUID E7432D38-5E20-4E2C-AF78-933D2CB3F11B, small LPT model [ 17.134649] monitor value xxxxxxx [ 17.675241] ecnt_wifi_eeprom: band0 uses art eeprom [ 17.744624] ecnt_wifi_eeprom: Updating macaddr field in /tmp/wifi_band0_eeprom.bin [ 17.778388] ecnt_wifi_eeprom: band1 uses art eeprom [ 17.843030] ecnt_wifi_eeprom: Updating macaddr field in /tmp/wifi_band1_eeprom.bin [ 28.847107] kmodloader: loading kernel modules from /etc/modules.d/* [ 28.886684] NET: Registered protocol family 38 [ 28.906912] tun: Universal TUN/TAP device driver, 1.6 [ 28.918336] l2tp_core: L2TP core driver, V2.0 [ 28.924369] l2tp_netlink: L2TP netlink interface [ 28.931451] nat46: module (version 4c5beee236841724219598fabb1edc93d4f08ce5) loaded. [ 28.941047] gre: GRE over IPv4 demultiplexor driver [ 28.947873] ip_gre: GRE over IPv4 tunneling driver [ 28.956712] ip6_gre: GRE over IPv6 tunneling driver [ 29.035940] i2c /dev entries driver [ 29.052199] fuse: init (API version 7.31) [ 29.073864] usbcore: registered new interface driver cdc_wdm [ 29.081088] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f [ 29.089069] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c [ 29.149022] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 29.164177] nf_conntrack_rtsp v0.7 loading [ 29.176210] nf_nat_rtsp v0.7 loading [ 29.181094] usbcore: registered new interface driver pl2303 [ 29.187037] usbserial: USB Serial support registered for pl2303 [ 29.193112] pl2303 1-1:1.0: pl2303 converter detected [ 29.198798] usb 1-1: pl2303 converter now attached to ttyUSB0 [ 29.209595] PPP MPPE Compression module registered [ 29.220274] PPTP driver version 0.8.5 [ 29.228754] usbcore: registered new interface driver sierra [ 29.234850] usbserial: USB Serial support registered for Sierra USB modem [ 29.267453] thermal driver version: 7523.3.20210910 ptp_init finished [ 29.348166] xt_time: kernel timezone is -0000 [ 29.353631] usbcore: registered new interface driver cdc_eem [ 29.361745] usbcore: registered new interface driver cdc_ether [ 29.378254] usbcore: registered new interface driver cdc_ncm [ 29.384839] usbcore: registered new interface driver cdc_subset [ 29.470357] usbcore: registered new interface driver huawei_cdc_ncm [ 29.517532] irq: no irq domain found for interrupt-controller ! [ 29.523692] woe_enable_chk:120 error!!! [ 29.527642] -->2) Error 2 opening /etc/woe_disable [ 29.532689] npu_enable_chk:164 error!!! [ 29.536657] npu npu_controller setting [ 29.536657] default open npu 2 opening /etc/npu_enable [ 29.545999] pci 0000:00:00.0: enabling device (0140 -> 0142) [ 29.551759] mt7915e 0000:01:00.0: enabling device (0140 -> 0142) [ 29.558137] mt7915_mmio_probe:1192 band=0 !!! [ 29.562601] call HOSTDAPT WIFI HOOK 2G [ 29.566777] hostdapt_registe_wifitask 0 [ 29.570702] init 2G tasklet ! [ 29.686539] whnat_driver_init:264 call hook sys up & hif init !!!!! [ 29.693036] whnat_cap_support:83 chip_id=30997 !!!!! [ 29.698127] whnat_cap_support(): chip_id=7915 is in WHNAT support list [ 29.704822] whnat_driver_init(): (efault) whnat is enable !!! [ 29.710707] wifi_slot_get(): bus name=PCI Bus 0000:01, funid=0, get slot id=0 [ 29.718026] whnat_entry_acquire:106 slot_id = 0 !!!!! [ 29.723145] whnat_entry_acquire(): PCIE SLOT:0, hook to WHNAT,entry id=0 [ 29.731054] wed_ring_init(): wed ring init result = 0 [ 29.753576] create wed ok!!! [ 29.756719] wdma_init(): wdma(0) base addr=e0af7000 [ 29.761692] wdma_init(): wdma(0) irq[0]=83 [ 29.765947] wdma_init(): wdma(0) irq[1]=84 [ 29.770125] wdma_init(): wdma(0) irq[2]=85 [ 29.774818] wifi_chip_probe(): Chang CHIP IRQ: 81 to WHNAT IRQ: 89 [ 29.781141] wifi_slot_get(): bus name=PCI Bus 0000:01, funid=0, get slot id=0 [ 29.788416] wifi_slot_get(): bus name=PCI Bus 0000:01, funid=0, get slot id=0 [ 29.795839] whnat_probe(): probe fail since whnat is full! [ 29.801475] whnat_dev0: probe of 1fa02000.wed2 failed with error -1 [ 29.808664] whnat_wed_ring_rx_update():614 index=0 val=97700000 !!! [ 29.815109] whnat_wed_ring_rx_update():614 index=4 val=200 !!! [ 29.821029] whnat_wed_ring_rx_update():614 index=8 val=1ff !!! [ 29.828554] wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 [ 29.833421] =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 [ 29.840629] whnat_hal_wdma_ring_init(): configure ring 0 setting [ 29.846728] whnat_hal_wdma_ring_init(): wed:(ptrval),wdma:(ptrval): 100=0,104=1024,108=0 [ 29.854982] whnat_hal_wdma_ring_init(): configure ring 1 setting [ 29.861071] whnat_hal_wdma_ring_init(): wed:(ptrval),wdma:(ptrval): 110=0,114=1024,118=0 [ 29.869254] whnat_hal_wpdma_ring_init(): configure ring 0 setting [ 29.875534] whnat_hal_wpdma_ring_init(): wed:(ptrval) wifi:(ptrval): d7300=99748000,d7304=2048,d7308=0 [ 29.885030] whnat_hal_wpdma_ring_init(): configure ring 1 setting [ 29.891245] whnat_hal_wpdma_ring_init(): wed:(ptrval) wifi:(ptrval): d7310=99fe0000,d7314=2048,d7318=0 [ 29.962703] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20221209200809a [ 29.962703] [ 30.165335] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20221209200841 [ 30.180810] random: fast init done [ 30.227266] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20221209200903 [ 30.343082] mt7915_mcu_init_firmware:2427 dev_ver=1 recv_id=0 !!! [ 30.349556] chip_type_check:101 open error !!! [ 30.354142] band_calibrated:130 open error !!! [ 30.358660] bbsoc_load_eeprom_from_bin:247 use default !!! [ 30.364219] mt7915e 0000:01:00.0: bbsoc_load_eeprom_from_bin() file_path:/lib/firmware/mediatek/mt7915_eeprom_2g.bin [ 30.374922] mt7915e 0000:01:00.0: load eeprom succesfully from /lib/firmware/mediatek/mt7915_eeprom_2g.bin [ 30.384712] mt7915e 0000:01:00.0: mt7915_eeprom_load flash_mode [ 30.390760] mt7915e 0000:01:00.0: val:0x24 [ 30.394930] mt7915e 0000:01:00.0: e2p matched with mt7915a hw [ 30.403997] npuOffload on mt76 init [ 30.407719] the value of pdev->bus->self->devfn is 0 ,and the band_index is 0 [ 30.415057] DriverModel=0 [ 30.417864] Error: 7915A NPU_WIFI_OFFLOAD Set Dirver Model success [ 30.424308] Error: 7915A NPU_WIFI_OFFLOAD Set PCIE PORT success [ 30.430479] !!!! do phy and virtual address mapping [ 30.436727] the addr of NCounter2G_Base is e123e0e4 [ 30.442729] dramBaEntry_pa=96400000 [ 30.446417] after :pci_resource_start= 20000000 [ 30.480038] WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e806020 [ 30.486067] irq: no irq domain found for interrupt-controller ! [ 30.492118] woe_enable_chk:120 error!!! [ 30.496143] -->2) Error 2 opening /etc/woe_disable [ 30.501014] npu_enable_chk:164 error!!! [ 30.505006] npu npu_controller setting [ 30.505006] default open npu 2 opening /etc/npu_enable [ 30.514236] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 30.520138] mt7915e 0000:02:00.0: enabling device (0140 -> 0142) [ 30.526483] mt7915_mmio_probe:1192 band=1 !!! [ 30.530983] call HOSTDAPT WIFI HOOK 5G [ 30.534994] hostdapt_registe_wifitask 1 [ 30.538901] init 5G tasklet ! [ 30.654737] whnat_driver_init:264 call hook sys up & hif init !!!!! [ 30.661090] whnat_cap_support:83 chip_id=30997 !!!!! [ 30.666223] whnat_cap_support(): chip_id=7915 is in WHNAT support list [ 30.672839] whnat_driver_init(): (efault) whnat is enable !!! [ 30.678768] wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 [ 30.685975] whnat_entry_acquire:106 slot_id = 1 !!!!! [ 30.691158] whnat_entry_acquire(): PCIE SLOT:1, hook to WHNAT,entry id=1 [ 30.698963] wed_ring_init(): wed ring init result = 0 [ 30.722118] create wed ok!!! [ 30.725158] wdma_init(): wdma(1) base addr=e18cb400 [ 30.730185] wdma_init(): wdma(1) irq[0]=86 [ 30.734347] wdma_init(): wdma(1) irq[1]=87 [ 30.738523] wdma_init(): wdma(1) irq[2]=88 [ 30.743210] wifi_chip_probe(): Chang CHIP IRQ: 82 to WHNAT IRQ: 90 [ 30.749468] wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 [ 30.756736] wifi_slot_get(): bus name=PCI Bus 0000:02, funid=8, get slot id=1 [ 30.764828] whnat_wed_ring_rx_update():614 index=0 val=95178000 !!! [ 30.771238] whnat_wed_ring_rx_update():614 index=4 val=200 !!! [ 30.777210] whnat_wed_ring_rx_update():614 index=8 val=1ff !!! [ 30.784575] wdma_dma_ctrl(): WDMA_GLO_CFG=40000450 [ 30.789457] =========whnat_hal_wdma_init :ECNT WED_WDMA_CFG_BASE = 1fa00000 [ 30.796643] whnat_hal_wdma_ring_init(): configure ring 0 setting [ 30.802785] whnat_hal_wdma_ring_init(): wed:(ptrval),wdma:(ptrval): 100=0,104=1024,108=0 [ 30.810945] whnat_hal_wdma_ring_init(): configure ring 1 setting [ 30.817086] whnat_hal_wdma_ring_init(): wed:(ptrval),wdma:(ptrval): 110=0,114=1024,118=0 [ 30.825314] whnat_hal_wpdma_ring_init(): configure ring 0 setting [ 30.831471] whnat_hal_wpdma_ring_init(): wed:(ptrval) wifi:(ptrval): d7300=96c38000,d7304=2048,d7308=0 [ 30.840912] whnat_hal_wpdma_ring_init(): configure ring 1 setting [ 30.847138] whnat_hal_wpdma_ring_init(): wed:(ptrval) wifi:(ptrval): d7310=97328000,d7314=2048,d7318=0 [ 30.875192] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20221209200809a [ 30.875192] [ 30.894100] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20221209200841 [ 30.917107] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20221209200903 [ 31.032762] mt7915_mcu_init_firmware:2427 dev_ver=1 recv_id=0 !!! [ 31.039221] chip_type_check:101 open error !!! [ 31.043804] band_calibrated:130 open error !!! [ 31.048320] bbsoc_load_eeprom_from_bin:227 use default !!! [ 31.053943] mt7915e 0000:02:00.0: bbsoc_load_eeprom_from_bin() file_path:/lib/firmware/mediatek/mt7915_eeprom.bin [ 31.064324] mt7915e 0000:02:00.0: load eeprom succesfully from /lib/firmware/mediatek/mt7915_eeprom.bin [ 31.073851] mt7915e 0000:02:00.0: mt7915_eeprom_load flash_mode [ 31.079910] mt7915e 0000:02:00.0: val:0x24 [ 31.084074] mt7915e 0000:02:00.0: e2p matched with mt7915a hw [ 31.093022] npuOffload on mt76 init [ 31.096704] the value of pdev->bus->self->devfn is 8 ,and the band_index is 1 [ 31.103970] DriverModel=0 [ 31.106771] Error: 7915A NPU_WIFI_OFFLOAD Set Dirver Model success [ 31.113205] Error: 7915A NPU_WIFI_OFFLOAD Set PCIE PORT success [ 31.119344] after :pci_resource_start= 20200000 [ 31.152426] WIFI_MAIL_API_GET_WAIT_RXDESC_BASE info=1e800000 [ 31.163561] usbcore: registered new interface driver option [ 31.169302] usbserial: USB Serial support registered for GSM modem (1-port) [ 31.178636] usbcore: registered new interface driver qmi_wwan [ 31.185669] usbcore: registered new interface driver sierra_net [ 31.193018] usbcore: registered new interface driver cdc_mbim [ 31.204567] kmodloader: done loading kernel modules from /etc/modules.d/* [ 32.353261] ae wan mac driver init [ 32.353270] sgmii_api_force_mode 3,0,1 [ 32.353272] sgmii_api_force_mode : SGMII SELECT 2.5G [ 32.353274] sgmii_api_pon0_force_hsgmii: inint [ 32.353283] sgmii_api_pon0_force_hsgmii: exit [ 32.353319] ae wan mac driver init OK [ 32.919725] get bob info from flash [ 32.921640] chmod bob_info attribute. [ 40.874686] random: crng init done [ 40.874695] random: 5 urandom warning(s) missed due to ratelimiting [ 53.442522] basicParameter = 0x4 [ 53.442531] tokenRate = 0x989680 [ 53.442533] bucketSize_shift = 0xc [ 53.442685] idx value error, correct range: 0-5 [ 53.442685] ,real idx :6idx value error, correct range: 0-5 [ 53.442685] ,real idx :7qos_wrr_info: 0 0 0 0 0 [ 53.442959] QDMA QoS: HW SP [ 53.443406] [ 53.443406] ether qos gQueueMask is 0xff [ 53.939084] br-lan: port 1(eth0.1) entered blocking state [ 53.939092] br-lan: port 1(eth0.1) entered disabled state [ 53.939315] device eth0.1 entered promiscuous mode [ 53.953268] br-lan: port 2(eth0.2) entered blocking state [ 53.953277] br-lan: port 2(eth0.2) entered disabled state [ 53.953489] device eth0.2 entered promiscuous mode [ 53.958706] br-lan: port 3(eth0.3) entered blocking state [ 53.958715] br-lan: port 3(eth0.3) entered disabled state [ 53.958945] device eth0.3 entered promiscuous mode [ 53.972868] br-lan: port 4(eth0.4) entered blocking state [ 53.972877] br-lan: port 4(eth0.4) entered disabled state [ 53.973978] device eth0.4 entered promiscuous mode [ 55.744337] status: [ 55.744337] DSPCore[Ver:TVM1.0.17.0-37],IsHdVoice=0,VOIP_MAX_CHAN=16 [ 55.815067] [1] PCM V2.4 (Oct 24 2021 09:01:35) [ 55.860287] bind irq-112 to CPU1 [ 55.860293] PCM_INT=28 [ 55.860310] pcm[Ver:TVM1.0.17.0-37] [ 55.904734] lec[Ver:TVM1.0.17.0-37] [ 55.930194] SYS_HCLK=250 [ 55.930202] Major Num:233, device: spi [ 55.930245] spi[Ver:TVM1.0.17.0-37] [ 55.974759] [4294942892][spi][INFO][SPI_slic_check:L2654]set slic type: ===0=== [ 55.974771] [4294942892][spi][INFO][SPI_slic_check:L2655]set interface_type: ===1=== [ 55.974776] [4294942892][spi][INFO][SPI_slic_check:L2656]set slicid: ===0=== [ 55.974783] [4294942892][spi][INFO][set_gpio_clocksrc:L2362]set gpio clocksrc,interface:1,devNum:1,gpio:1000 [ 55.974789] [4294942892][spi][INFO][set_gpio_clocksrc:L2373]ZSI [ 55.974797] [4294942892][spi][INFO][SLIC_Reset_Infc:L2334]======slic reset 7512====== [ 55.974802] [4294942892][spi][INFO][SPI_Reset:L536] [ 55.974802] SPI_Reset 2 [ 56.095102] [4294942904][spi][INFO][SPI_slic_check:L2683]======spi check zarlink====== [ 56.095231] [4294942904][spi][INFO][SPI_slic_check:L2698]res_arr[0]:0x8 [ 56.095231] res_arr[1]:0x49 [ 56.095238] [4294942904][spi][INFO][SPI_slic_check:L2723]le9641_deviceVerify RCNPCN success! [ 56.095243] param.data:le9641 [ 56.266992] ========fxs3 init start======== [ 56.285108] ========fxs3 init complete======== [ 56.285223] . [ 56.397391] init mod-slic3 [ 56.397416] slic3[Ver:TVM1.0.17.0-37] [ 56.397419] mode= [ 56.397424] ZSI [ 56.406987] init mod-ksocket [ 56.407012] ksocket[Ver:TVM1.0.17.0-37] [ 56.454727] ortp[Ver:TVM1.0.17.0-37] [ 56.578525] br-lan: port 2(eth0.2) entered blocking state [ 56.578534] br-lan: port 2(eth0.2) entered forwarding state [ 56.578760] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 56.604124] init mod-acodec [ 56.604148] acodec[Ver:TVM1.0.17.0-37] [ 56.630647] mt7915_mcu_set_sku_en: enable = 1 [ 56.860042] init mod-foip3 [ 56.860067] foip3[Ver:TVM1.0.17.0-37] [ 56.992909] br-lan: port 5(wlan0_0) entered blocking state [ 56.992917] br-lan: port 5(wlan0_0) entered disabled state [ 56.993183] device wlan0_0 entered promiscuous mode [ 56.993283] br-lan: port 5(wlan0_0) entered blocking state [ 56.993289] br-lan: port 5(wlan0_0) entered forwarding state [ 57.044378] mt7915_mcu_set_sku_en: enable = 1 [ 57.294692] [4294943024][slic][INFO][gpio_clocksrc_init:L2590]ZSI [ 57.294715] [4294943024][spi][INFO][SPI_Reset:L536] [ 57.294715] SPI_Reset 2 [ 57.414679] slic_deviceVerify slic[0] Start [ 57.414784] deviceid=0 RCN=8 PCN=49 [ 57.414787] slic_deviceVerify Success! [ 57.414787] rd_cnt=1 [ 57.414790] SPI Reset times:1 [ 57.414794] pcm1 ch num:1 pcm2 ch num:0 [ 57.414923] fxs[Ver:TVM1.0.17.0-37] [ 57.414928] [fxs_init_action](1364)noinit=0 [ 57.414931] pcm1 ch num:1 pcm2 ch num:0 [ 57.414935] Init fxsNum(1) + fxoNum(0) = slic_ch_num(1) ,totoalChNum(1), deviceNum(1) [ 57.414939] deviceInit on deviceid[0] [ 57.414954] slic profile load Successful(CountryCode=Default) [ 57.414958] [ 57.414958] device profile len:44 [ 57.414961] 0D FF 00 28 04 14 46 02 [ 57.414969] 44 46 5E 14 00 F6 95 00 [ 57.414976] 58 30 5C 30 E4 44 92 0A [ 57.414984] E6 60 00 A0 00 00 01 30 [ 57.414991] 14 30 14 30 14 FF 95 00 [ 57.414999] 62 62 04 3C [ 57.415004] [ 57.415004] dc profile len:16 [ 57.415006] 0D 01 00 0C 02 03 C6 92 [ 57.415014] 27 9C 84 58 80 02 00 07 [ 57.415022] [ 57.415022] ring profile len:22 [ 57.415024] 0D 04 00 12 01 0C C0 08 [ 57.415032] 00 00 00 44 3A 9D 00 00 [ 57.415039] 00 00 AA 02 0E 00 [ 57.415046] [ 57.415046] ac profile len:80 [ 57.415048] A4 00 F4 4C 01 49 CA F5 [ 57.415055] 98 AA 7B AB 2C A3 25 A5 [ 57.415063] 24 B2 3D 9A 2A AA A6 9F [ 57.415071] 01 8A 1D 01 A3 A0 2E B2 [ 57.415078] B2 BA AC A2 A6 CB 3B 45 [ 57.415086] 88 2A 20 3C BC 4E A6 2B [ 57.415093] A5 2B 3E BA 8F 82 A8 71 [ 57.415101] 80 A9 F0 50 00 86 2A 42 [ 57.415108] A1 CB 1B A3 A8 FB 87 AA [ 57.415116] FB 9F A9 F0 96 2E 01 00 [ 57.424764] . [ 57.445638] br-lan: port 6(wlan1_0) entered blocking state [ 57.445646] br-lan: port 6(wlan1_0) entered disabled state [ 57.445854] device wlan1_0 entered promiscuous mode [ 57.445941] br-lan: port 6(wlan1_0) entered blocking state [ 57.445946] br-lan: port 6(wlan1_0) entered forwarding state [ 57.851870] Chk[0]:Dev[0]chan[0][0]:st0=0,ed0=0: Cat=0x2 Id=0x400 [ 57.851876] Dev[0] Init Cmp! [ 57.852256] Start Line Standby on lineNum 0 [ 57.853238] Start Calibration on lineNum 0 [ 58.024666] . [ 58.368590] Chk[0]:Dev[0]chan[0][0]:st0=0,ed0=0: Cat=0x2 Id=0x40 [ 58.368599] Calibration done on lineNum 0 (1/2) [ 58.368602] Calibration completed on both lines [ 58.368679] [ 58.368679] Init_Cnt = 85 [ 58.368688] timeslot:2 [ 58.368759] FXS-0 timeslot:2 [ 58.371009] br-lan: port 5(wlan0_0) entered disabled state [ 58.371341] br-lan: port 6(wlan1_0) entered disabled state [ 59.054748] .init mod-vdsp for 1 channels 2 sessions [ 59.054748] vdsp[Ver:TVM1.0.17.0-37] [ 59.065126] [ 59.065126] =============================== [ 59.065131] || MTK DSP init successfully || [ 59.065134] =============================== [ 59.065134] [ 61.756217] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0_0: link becomes ready [ 61.756411] br-lan: port 5(wlan0_0) entered blocking state [ 61.756418] br-lan: port 5(wlan0_0) entered forwarding state [ 69.105460] block ubiblock0_4: created from ubi0:4(rootfs1) [ 69.112503] /dev/ubiblock0_4: Can't open blockdev [ 70.150032] slic_set_gainLv - 47cf / 47cf [ 70.150040] le9662:speakVal=18383,listenVal=18383 [ 70.150245] slic_set_gainLv - 47cf / 47cf [ 70.151059] slic profile load Successful(CountryCode=SWE-Sweden) [ 70.151070] [ 70.151070] device profile len:44 [ 70.151077] 0D FF 00 28 04 14 46 02 [ 70.151086] 44 46 5E 14 00 F6 95 00 [ 70.151094] 58 30 5C 30 E4 44 92 0A [ 70.151101] E6 60 00 A0 00 00 01 30 [ 70.151109] 14 30 14 30 14 FF 95 00 [ 70.151116] 62 62 04 3C [ 70.151122] [ 70.151122] dc profile len:16 [ 70.151124] 0D 01 00 0C 02 03 C6 92 [ 70.151132] 27 9C 84 58 80 02 00 07 [ 70.151139] [ 70.151139] ring profile len:22 [ 70.151142] 0D 04 00 12 01 0C C0 08 [ 70.151149] 00 00 00 44 3A 9D 00 00 [ 70.151157] 00 00 AA 02 0E 00 [ 70.151163] [ 70.151163] ac profile len:80 [ 70.151165] A4 00 F4 4C 01 49 CA F5 [ 70.151173] 98 AA 7B AB 2C A3 25 A5 [ 70.151181] 24 B2 3D 9A 2A AA A6 9F [ 70.151188] 01 8A 1D 01 A3 A0 2E B2 [ 70.151196] B2 BA AC A2 A6 CB 3B 45 [ 70.151203] 88 2A 20 3C BC 4E A6 2B [ 70.151211] A5 2B 3E BA 8F 82 A8 71 [ 70.151219] 80 A9 F0 50 00 86 2A 42 [ 70.151226] A1 CB 1B A3 A8 FB 87 AA [ 70.151234] FB 9F A9 F0 96 2E 01 00 [ 70.153715] slic_set_countryCode :country code:32 VpConfigLine ret:0 [ 70.454336] /dev/ubiblock0_4: Can't open blockdev [ 73.952282] uledd: v1.0.1 started.