Secure key does not exist EN7523DRAMC V0.5 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x1b, OCDN:0x1b, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=256MB U-Boot 2026.01-OpenWrt-r34136-e8ee42f9a5 (Apr 24 2026 - 22:04:23 +0000) CPU: Airoha EN7523/EN7529/EN7562 Model: TP-Link xx230v v1 DRAM: 512 MiB Core: 24 devices, 16 uclasses, devicetree: separate Loading Environment from UBI... spi-nand: spi_nand nand@0: ESMT SPI NAND was found. spi-nand: spi_nand nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 Read 16384 bytes from volume ubootenv to 9fb25680 Read 16384 bytes from volume ubootenv2 to 9fb296c0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@1fb50000 (eth0) using random MAC address - fa:34:24:5f:ca:5c eth0: ethernet@1fb50000 Hit any key to stop autoboot: 3  0 U-Boot> tftpboot openwrt-airoha-an7523-tplink_xx230v_v1-initramfs-kernel.bin && bootm Using ethernet@1fb50000 device TFTP from server 192.168.1.10; our IP address is 192.168.1.1 Filename 'openwrt-airoha-an7523-tplink_xx230v_v1-initramfs-kernel.bin'. Load address: 0x86a00000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.2 MiB/s done Bytes transferred = 24379392 (1740000 hex) ## Loading kernel (any) from FIT Image at 86a00000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.85 Type: Kernel Image Compression: lzma compressed Data Start: 0x86a000e4 Data Size: 24331375 Bytes = 23.2 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: 1e0b2f53 Hash algo: sha1 Hash value: 384bd53ff0143250d4ca848efc1ad2ef76fc30fc Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading fdt (any) from FIT Image at 86a00000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt tplink_xx230v_v1 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x88134690 Data Size: 14174 Bytes = 13.8 KiB Architecture: ARM Hash algo: crc32 Hash value: f1421a08 Hash algo: sha1 Hash value: 7fa949b23fdfcc5aaa7eb3f5c0e4104d715e7ddb Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x88134690 Working FDT set to 88134690 Uncompressing Kernel Image to 80208000 Loading Device Tree to 9eb1e000, end 9eb2475d ... OK Working FDT set to 9eb1e000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.85 (sirherobrine23@matheus-note) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 r33479-5f7ec5c8b9) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Wed May 6 19:49:24 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TP-Link xx230v/xx530v v1 [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff] [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000844fffff] [ 0.000000] node 0: [mem 0x0000000084500000-0x00000000848fffff] [ 0.000000] node 0: [mem 0x0000000084900000-0x00000000862fffff] [ 0.000000] node 0: [mem 0x0000000086300000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000 [ 0.000000] OF: reserved mem: 0x84000000..0x840fffff (1024 KiB) nomap non-reusable npu_binary@84000000 [ 0.000000] OF: reserved mem: 0x84100000..0x844fffff (4096 KiB) nomap non-reusable qdma0-buf@84100000 [ 0.000000] OF: reserved mem: 0x84900000..0x84cfffff (4096 KiB) nomap non-reusable qdma1-buf@84900000 [ 0.000000] OF: reserved mem: 0x84d00000..0x862fffff (22528 KiB) nomap non-reusable npu-pkt@84d00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 14 pages/cpu s25228 r8192 d23924 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon ubi.block=0,fit root=/dev/ubiblock0_3 rootwait [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008800] Switching to timer-based delay loop, resolution 40ns [ 0.015556] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.026940] CPU: Testing write buffer coherency: ok [ 0.032332] pid_max: default: 32768 minimum: 301 [ 0.044108] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.052156] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.063694] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070938] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.078289] rcu: Hierarchical SRCU implementation. [ 0.083556] rcu: Max phase no-delay instances is 1000. [ 0.089576] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.098779] smp: Bringing up secondary CPUs ... [ 0.104454] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.104509] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.104658] smp: Brought up 1 node, 2 CPUs [ 0.122185] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.129085] CPU: All CPU(s) started in SVC mode. [ 0.134647] Memory: 452596K/522240K available (7756K kernel code, 622K rwdata, 2020K rodata, 20480K init, 217K bss, 68512K reserved, 0K cma-reserved) [ 0.153787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.164655] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.175553] pinctrl core: initialized pinctrl subsystem [ 0.183383] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.190196] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.198559] thermal_sys: Registered thermal governor 'step_wise' [ 0.198649] cpuidle: using governor menu [ 0.212251] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller [ 0.222193] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller [ 0.240948] SCSI subsystem initialized [ 0.245330] usbcore: registered new interface driver usbfs [ 0.251390] usbcore: registered new interface driver hub [ 0.257297] usbcore: registered new device driver usb [ 0.264304] clocksource: Switched to clocksource arch_sys_counter [ 0.277171] NET: Registered PF_INET protocol family [ 0.282700] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.291655] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.300912] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.309445] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.318003] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.325948] TCP: Hash tables configured (established 4096 bind 4096) [ 0.333220] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.341431] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.348657] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.356757] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.363012] PCI: CLS 0 bytes, default 64 [ 0.368758] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.377542] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.383966] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.677321] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.684597] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 1.284398] mtk-pcie 1fa91000.pcie: Port0 link down [ 1.290099] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 1.296972] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.303010] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 1.311533] PCI: bus0: Fast back to back transfers enabled [ 1.317603] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.324859] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.332061] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.862830] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.869676] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.875724] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.883587] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.891839] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.900753] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.908685] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.914216] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.923904] PCI: bus0: Fast back to back transfers disabled [ 1.930088] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.939615] pci 0001:01:00.0: [14c3:7915] type 00 class 0x000280 PCIe Endpoint [ 1.947793] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.955477] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00003fff 64bit pref] [ 1.963136] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.971448] pci 0001:01:00.0: supports D1 D2 [ 1.976158] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.983773] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 2.000825] PCI: bus1: Fast back to back transfers disabled [ 2.007008] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.014361] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 2.022587] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 2.030985] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 2.039033] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 2.047660] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22103fff 64bit pref]: assigned [ 2.056284] pci 0001:01:00.0: BAR 4 [mem 0x22104000-0x22104fff 64bit pref]: assigned [ 2.064907] pci 0001:00:01.0: PCI bridge to [bus 01] [ 2.070397] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 2.077941] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 2.084845] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 2.092421] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 2.099969] pcieport 0001:00:01.0: PME: Signaling with IRQ 31 [ 2.108258] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.116261] printk: legacy console [ttyS0] disabled [ 2.122057] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 32, base_baud = 115200) is a 16550 [ 2.131705] printk: legacy console [ttyS0] enabled [ 2.131705] printk: legacy console [ttyS0] enabled [ 2.141779] printk: legacy bootconsole [ns16550] disabled [ 2.141779] printk: legacy bootconsole [ns16550] disabled [ 2.157781] airoha-spi 1fa10000.spi: boot type: NAND [ 2.163334] spi-nand spi0.0: ESMT SPI NAND was found. [ 2.168439] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 2.177313] random: crng init done [ 18.724759] 2 fixed-partitions partitions found on MTD device spi0.0 [ 18.731377] Creating 2 MTD partitions on "spi0.0": [ 18.736237] 0x000000000000-0x000000100000 : "u-boot" [ 18.743906] 0x000000100000-0x000008000000 : "ubi" [ 19.023225] ubi0: attaching mtd1 [ 19.684325] ubi0: scanning is finished [ 19.697512] ubi0: attached mtd1 (name "ubi", size 127 MiB) [ 19.703027] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 19.709947] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 19.716756] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 19.723720] ubi0: good PEBs: 1016, bad PEBs: 0, corrupted PEBs: 0 [ 19.729823] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 [ 19.737056] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 [ 19.745439] ubi0: available PEBs: 0, total reserved PEBs: 1016, PEBs reserved for bad PEB handling: 20 [ 19.754784] ubi0: background thread "ubi_bgt0d" started, PID 146 [ 19.756228] block ubiblock0_3: created from ubi0:3(fit) [ 19.766965] spi_master spi0: cannot find modalias for /spi@1fa10000/flash@1 [ 19.773944] spi_master spi0: Failed to create SPI device for /spi@1fa10000/flash@1 [ 19.856147] airoha-npu 1e900000.npu: L2C sram: 0x00, FPGA Stage: 0 [ 20.814293] airoha-npu 1e900000.npu: wlan get msg: id 10, core 0, body size 4 [ 20.821459] airoha-npu 1e900000.npu: NPU not support get version [ 20.827797] xhci-mtk 1fab0000.usb: supply vbus not found, using dummy regulator [ 20.835335] xhci-mtk 1fab0000.usb: supply vusb33 not found, using dummy regulator [ 20.856813] airoha-usb-phy 1fad0000.phy: Frequency not detected, using default SR calibration. [ 20.870017] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 20.875316] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 1 [ 20.886679] xhci-mtk 1fab0000.usb: hcc params 0x01400f98 hci version 0x110 quirks 0x0000000000200010 [ 20.895912] xhci-mtk 1fab0000.usb: irq 46, io mem 0x1fab0000 [ 20.901721] xhci-mtk 1fab0000.usb: xHCI Host Controller [ 20.907002] xhci-mtk 1fab0000.usb: new USB bus registered, assigned bus number 2 [ 20.914422] xhci-mtk 1fab0000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 20.922198] hub 1-0:1.0: USB hub found [ 20.926064] hub 1-0:1.0: 2 ports detected [ 20.930797] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 20.939618] hub 2-0:1.0: USB hub found [ 20.943518] hub 2-0:1.0: 1 port detected [ 20.948325] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz [ 20.966039] mtk-eip93 1fb70000.crypto: EIP93:3:0:1,PE(0xfe007:0x41710041) [ 20.973300] NET: Registered PF_INET6 protocol family [ 20.979550] Segment Routing with IPv6 [ 20.983263] In-situ OAM (IOAM) with IPv6 [ 20.987334] NET: Registered PF_PACKET protocol family [ 20.992597] 8021q: 802.1Q VLAN Support v1.8 [ 20.996953] Registering SWP/SWPB emulation handler [ 21.097989] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode [ 21.105877] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx [ 21.130835] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Airoha AN7523 PHY] (irq=POLL) [ 21.142392] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Airoha AN7523 PHY] (irq=POLL) [ 21.153863] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530-0:0b] driver [Airoha AN7523 PHY] (irq=POLL) [ 21.165345] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0c] driver [Airoha AN7523 PHY] (irq=POLL) [ 21.176743] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode [ 21.183422] DSA: tree 0 setup [ 21.187259] clk: Disabling unused clocks [ 21.191204] PM: genpd: Disabling unused power domains [ 21.217145] Freeing unused kernel image (initmem) memory: 20480K [ 21.223466] Run /init as init process [ 21.902438] init: Console is alive [ 21.906138] init: - watchdog - [ 21.923053] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 21.939120] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 21.964201] usbcore: registered new interface driver usb-storage [ 21.979210] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 21.990765] init: - preinit - Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 23.369769] procd: - early - [ 23.372808] procd: - watchdog - [ 23.906065] procd: - watchdog - [ 23.909767] procd: - ubus - [ 23.965993] procd: - init - Please press Enter to activate this console. [ 24.346709] kmodloader: loading kernel modules from /etc/modules.d/* [ 24.664569] i2c_dev: i2c /dev entries driver [ 24.670596] GACT probability on [ 24.674954] Mirror/redirect action on [ 24.706765] u32 classifier [ 24.709495] input device check on [ 24.713156] Actions configured [ 24.743321] ntfs3: Enabled Linux POSIX ACLs support [ 24.769282] Loading modules backported from Linux version v6.18.26-0-g1fe060681 [ 24.776797] Backport generated by backports.git 6ecbb44 [ 24.861872] usbcore: registered new interface driver ums-alauda [ 24.870384] usbcore: registered new interface driver ums-cypress [ 24.880222] usbcore: registered new interface driver ums-datafab [ 24.889784] usbcore: registered new interface driver ums-freecom [ 24.897623] usbcore: registered new interface driver ums-isd200 [ 24.908578] usbcore: registered new interface driver ums-jumpshot [ 24.927512] usbcore: registered new interface driver ums-karma [ 24.948936] usbcore: registered new interface driver ums-sddr09 [ 24.968011] usbcore: registered new interface driver ums-sddr55 [ 24.976395] usbcore: registered new interface driver ums-usbat [ 25.066122] xt_time: kernel timezone is -0000 [ 25.205899] urngd: v1.0.2 started. [ 25.237255] mt7915e 0001:01:00.0: enabling device (0140 -> 0142) [ 25.405883] mt7915e 0001:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20240429200716a [ 25.433402] mt7915e 0001:01:00.0: WM Firmware Version: ____000000, Build Time: 20240429200752 [ 25.477349] mt7915e 0001:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20240429200812 [ 25.615577] mt7915e 0001:01:00.0: registering led 'mt76-phy0' [ 25.688253] mt7915e 0001:01:00.0: registering led 'mt76-phy1' [ 25.816393] PPP generic driver version 2.4.2 [ 25.823296] NET: Registered PF_PPPOX protocol family [ 25.832235] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 25.840177] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 25.891165] kmodloader: done loading kernel modules from /etc/modules.d/* [ 38.632076] mt7530-mmio 1fb58000.switch lan1: configuring for phy/internal link mode [ 38.653041] br-lan: port 1(lan1) entered blocking state [ 38.658412] br-lan: port 1(lan1) entered disabled state [ 38.663731] mt7530-mmio 1fb58000.switch lan1: entered allmulticast mode [ 38.670419] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode [ 38.677506] mt7530-mmio 1fb58000.switch lan1: entered promiscuous mode [ 38.737026] mt7530-mmio 1fb58000.switch lan2: configuring for phy/internal link mode [ 38.750548] br-lan: port 2(lan2) entered blocking state [ 38.755914] br-lan: port 2(lan2) entered disabled state [ 38.761234] mt7530-mmio 1fb58000.switch lan2: entered allmulticast mode [ 38.768249] mt7530-mmio 1fb58000.switch lan2: entered promiscuous mode [ 38.793491] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode [ 38.808087] br-lan: port 3(lan3) entered blocking state [ 38.813363] br-lan: port 3(lan3) entered disabled state [ 38.818790] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode [ 38.825905] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode [ 38.833878] mt7530-mmio 1fb58000.switch lan3: Link is Up - 1Gbps/Full - flow control rx/tx [ 38.842306] br-lan: port 3(lan3) entered blocking state [ 38.847611] br-lan: port 3(lan3) entered forwarding state [ 38.882305] mt7530-mmio 1fb58000.switch wan: configuring for phy/internal link mode