Secure key does not exist EN7523DRAMC V0.5 dram_type = 5, speed = 1866 Final Impdance Cal Result: OCDP:0x17, OCDN:0x1b, ODTP:0x6, ODTN:0x6 DDR1866 PLL setting init [Dramc] PCDDR3 AC Timing update Fire MRW command... ModeReg.2, value.0x20 done Fire MRW command... ModeReg.3, value.0x0 done Fire MRW command... ModeReg.1, value.0x6 done Fire MRW command... ModeReg.0, value.0x1114 done Fire MRW command... ModeReg.1, value.0x86 done Fire MRW command... ModeReg.1, value.0x6 done Calculate size. DRAM size=512MB U-Boot 2023.07.02-OpenWrt-r23630-842932a63d-00059-g88f17672a-dirty (Sep 10 2024 - 13:20:35 +0200) CPU: Airoha EN7529DT DRAM: 496 MiB Core: 7 devices, 6 uclasses, devicetree: fit spi-nand: spi_nand spinand@0: Winbond SPI NAND was found. spi-nand: spi_nand spinand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 + 0x000000000000-0x000010000000 : "spi-nand0" + 0x000000000000-0x000000100000 : "u-boot" + 0x000000100000-0x000010000000 : "ubi" In: serial@1fbf0000 Out: serial@1fbf0000 Err: serial@1fbf0000 Net: eth0: en75xx-eth Loading Environment from UBI... ubi0: default fastmap pool size: 100 ubi0: default fastmap WL pool size: 50 ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "ubi", size 255 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 702916436 ubi0: available PEBs: 297, total reserved PEBs: 1743, PEBs reserved for bad PEB handling: 40 Read 126976 bytes from volume env1 to 9eaf2980 Read 126976 bytes from volume env2 to 9eb119c0 OK apply matching dtb: en7523-pixly-r2 Autoboot in 2 seconds =>   tftpboot 0x960000000  nla.bin en75xx-eth: using internal switch Using en75xx-eth device TFTP from server 192.168.1.100; our IP address is 192.168.1.1 Filename 'nla.bin'. Load address: 0x96000000 Loading: *################################################## 3.6 MiB 325.2 KiB/s done Bytes transferred = 3724900 (38d664 hex) => tftpboot 0x86000000 860000000.bin.bin  Using en75xx-eth device TFTP from server 192.168.1.100; our IP address is 192.168.1.1 Filename '86000000.bin'. Load address: 0x86000000 Loading: *################################################## 4 MiB 588.9 KiB/s done Bytes transferred = 4203819 (40252b hex) => setenv bootargs=  console=ttyS0,115200 earlycon root=/dev/ram0 => bootm 0x96000000 0x9 86000000000000 0x860000000 000000 ## Loading kernel from FIT Image at 96000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM OpenWrt Linux-6.12.80 Type: Kernel Image Compression: lzma compressed Data Start: 0x960000e4 Data Size: 3710273 Bytes = 3.5 MiB Architecture: ARM OS: Linux Load Address: 0x80208000 Entry Point: 0x80208000 Hash algo: crc32 Hash value: b402f78c Hash algo: sha1 Hash value: 65750277e71a74178379595a25f71df54f201c98 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading init Ramdisk from Legacy Image at 86000000 ... Image Name: OpenWrt RAMDISK Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4203755 Bytes = 4 MiB Load Address: 86000000 Entry Point: 86000000 Verifying Checksum ... OK ## Loading fdt from FIT Image at 96000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM OpenWrt heimgard_cx30 device tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x96389f60 Data Size: 13249 Bytes = 12.9 KiB Architecture: ARM Hash algo: crc32 Hash value: 0ab7f4a0 Hash algo: sha1 Hash value: 3e416489a49788c9c611d721cd7882d130a6e8b9 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x96389f60 Working FDT set to 96389f60 Uncompressing Kernel Image Loading Ramdisk to 9e72a000, end 9eb2c4eb ... OK Loading Device Tree to 9e723000, end 9e7293c0 ... OK Working FDT set to 9e723000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.80 (bcsaba@fbxgw7) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 14.3.0 unknown) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Sat Apr 18 02:05:24 2026 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Heimgard CX30 [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 [ 0.000000] earlycon: ns16550 at MMIO32 0x1fbf0000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff] [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000844fffff] [ 0.000000] node 0: [mem 0x0000000084500000-0x00000000848fffff] [ 0.000000] node 0: [mem 0x0000000084900000-0x00000000862fffff] [ 0.000000] node 0: [mem 0x0000000086300000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000009fffffff] [ 0.000000] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.000000] OF: reserved mem: 0x80000000..0x8003ffff (256 KiB) nomap non-reusable atf@80000000 [ 0.000000] OF: reserved mem: 0x84000000..0x840fffff (1024 KiB) nomap non-reusable npu_binary@84000000 [ 0.000000] OF: reserved mem: 0x84100000..0x844fffff (4096 KiB) nomap non-reusable qdma0-buf@84100000 [ 0.000000] OF: reserved mem: 0x84900000..0x84cfffff (4096 KiB) nomap non-reusable qdma1-buf@84900000 [ 0.000000] OF: reserved mem: 0x84d00000..0x862fffff (22528 KiB) nomap non-reusable npu-pkt@84d00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 14 pages/cpu s25164 r8192 d23988 u57344 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon root=/dev/ram0 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x09080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008801] Switching to timer-based delay loop, resolution 40ns [ 0.015558] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.026949] CPU: Testing write buffer coherency: ok [ 0.032341] pid_max: default: 32768 minimum: 301 [ 0.045331] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.053380] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.065360] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.072678] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.080045] rcu: Hierarchical SRCU implementation. [ 0.085309] rcu: Max phase no-delay instances is 1000. [ 0.091352] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.100572] smp: Bringing up secondary CPUs ... [ 0.120681] GICv3: CPU1: found redistributor 1 region 0:0x090a0000 [ 0.120737] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.120885] smp: Brought up 1 node, 2 CPUs [ 0.138400] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.145300] CPU: All CPU(s) started in SVC mode. [ 0.150866] Memory: 467940K/522240K available (7652K kernel code, 620K rwdata, 1988K rodata, 1024K init, 219K bss, 53168K reserved, 0K cma-reserved) [ 0.169311] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.180185] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.191670] pinctrl core: initialized pinctrl subsystem [ 0.199474] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.206304] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.214639] thermal_sys: Registered thermal governor 'step_wise' [ 0.214722] cpuidle: using governor menu [ 0.228140] /pcie@1fa91000: Fixed dependency cycle(s) with /pcie@1fa91000/interrupt-controller [ 0.237996] /pcie@1fa92000: Fixed dependency cycle(s) with /pcie@1fa92000/interrupt-controller [ 0.256985] SCSI subsystem initialized [ 0.261433] usbcore: registered new interface driver usbfs [ 0.267499] usbcore: registered new interface driver hub [ 0.273412] usbcore: registered new device driver usb [ 0.280371] clocksource: Switched to clocksource arch_sys_counter [ 0.294119] NET: Registered PF_INET protocol family [ 0.299668] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.308540] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.317783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.326324] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.334890] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.342842] TCP: Hash tables configured (established 4096 bind 4096) [ 0.350276] MPTCP token hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.358521] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.365734] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.373892] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.380148] PCI: CLS 0 bytes, default 64 [ 0.386014] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.386279] Unpacking initramfs... [ 0.395056] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.396927] Initramfs unpacking failed: compression method gzip not configured [ 0.403357] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.415386] Freeing initrd memory: 4108K [ 0.429447] mtk-pcie 1fa91000.pcie: host bridge /pcie@1fa91000 ranges: [ 0.436737] mtk-pcie 1fa91000.pcie: MEM 0x0020000000..0x0021ffffff -> 0x0020000000 [ 0.968896] mtk-pcie 1fa91000.pcie: PCI host bridge to bus 0000:00 [ 0.975753] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.981815] pci_bus 0000:00: root bus resource [mem 0x20000000-0x21ffffff] [ 0.989598] pci 0000:00:00.0: [14c3:0810] type 01 class 0x060400 PCIe Root Port [ 0.997824] pci 0000:00:00.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.006726] pci 0000:00:00.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.014649] pci 0000:00:00.0: PCI bridge to [bus 00] [ 1.020168] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 1.029738] PCI: bus0: Fast back to back transfers disabled [ 1.035921] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.045383] pci 0000:01:00.0: [14c3:790a] type 00 class 0x028000 PCIe Endpoint [ 1.053551] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.061233] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.068414] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.076719] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.083780] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.100795] PCI: bus1: Fast back to back transfers disabled [ 1.106929] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.114276] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]: assigned [ 1.122534] pci 0000:00:00.0: BAR 0 [mem 0x20200000 64bit pref disabled]: assigned [ 1.130916] pci 0000:00:00.0: BAR 0: error updating (0x2020000c != 0x0000000c) [ 1.138892] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x200fffff 64bit pref]: assigned [ 1.147501] pci 0000:01:00.0: BAR 2 [mem 0x20100000-0x20107fff 64bit]: assigned [ 1.155629] pci 0000:01:00.0: BAR 4 [mem 0x20108000-0x20108fff 64bit pref]: assigned [ 1.164232] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.169719] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff] [ 1.177254] pci_bus 0000:00: resource 4 [mem 0x20000000-0x21ffffff] [ 1.184147] pci_bus 0000:01: resource 1 [mem 0x20000000-0x201fffff] [ 1.191712] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.199190] pcieport 0000:00:00.0: PME: Signaling with IRQ 30 [ 1.207066] mtk-pcie 1fa92000.pcie: host bridge /pcie@1fa92000 ranges: [ 1.214309] mtk-pcie 1fa92000.pcie: MEM 0x0022000000..0x0023ffffff -> 0x0022000000 [ 1.371295] mtk-pcie 1fa92000.pcie: PCI host bridge to bus 0001:00 [ 1.378103] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.384161] pci_bus 0001:00: root bus resource [mem 0x22000000-0x23ffffff] [ 1.392032] pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port [ 1.400248] pci 0001:00:01.0: BAR 0: can't handle BAR larger than 4GB (size 0x200000000) [ 1.409156] pci 0001:00:01.0: BAR 0 [mem size 0x00000001 64bit pref disabled] [ 1.417088] pci 0001:00:01.0: PCI bridge to [bus 00] [ 1.422618] pci 0001:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 1.432180] PCI: bus0: Fast back to back transfers disabled [ 1.438328] pci 0001:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.447850] pci 0001:01:00.0: [14c3:7906] type 00 class 0x028000 PCIe Endpoint [ 1.456011] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit pref] [ 1.463700] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit] [ 1.470907] pci 0001:01:00.0: BAR 4 [mem 0x00000000-0x00000fff 64bit pref] [ 1.479201] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 1.486255] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0001:00:01.0 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 1.503284] PCI: bus1: Fast back to back transfers disabled [ 1.509411] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.516774] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff]: assigned [ 1.525021] pci 0001:00:01.0: BAR 0 [mem 0x22200000 64bit pref disabled]: assigned [ 1.533403] pci 0001:00:01.0: BAR 0: error updating (0x2220000c != 0x0000000c) [ 1.541392] pci 0001:01:00.0: BAR 0 [mem 0x22000000-0x220fffff 64bit pref]: assigned [ 1.549981] pci 0001:01:00.0: BAR 2 [mem 0x22100000-0x22107fff 64bit]: assigned [ 1.558102] pci 0001:01:00.0: BAR 4 [mem 0x22108000-0x22108fff 64bit pref]: assigned [ 1.566705] pci 0001:00:01.0: PCI bridge to [bus 01] [ 1.572203] pci 0001:00:01.0: bridge window [mem 0x22000000-0x221fffff] [ 1.579727] pci_bus 0001:00: resource 4 [mem 0x22000000-0x23ffffff] [ 1.586621] pci_bus 0001:01: resource 1 [mem 0x22000000-0x221fffff] [ 1.594187] pcieport 0001:00:01.0: enabling device (0140 -> 0142) [ 1.601690] pcieport 0001:00:01.0: PME: Signaling with IRQ 32 [ 1.609776] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.618093] printk: legacy console [ttyS0] disabled [ 1.623949] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 33, base_baud = 115200) is a 16550 [ 1.633603] printk: legacy console [ttyS0] enabled [ 1.633603] printk: legacy console [ttyS0] enabled [ 1.643689] printk: legacy bootconsole [ns16550] disabled [ 1.643689] printk: legacy bootconsole [ns16550] disabled [ 1.657194] random: crng init done [ 1.658239] spi-nand spi0.0: Winbond SPI NAND was found. [ 1.665998] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 [ 1.674658] 2 fixed-partitions partitions found on MTD device spi0.0 [ 1.681320] Creating 2 MTD partitions on "spi0.0": [ 1.686140] 0x000000000000-0x000000100000 : "u-boot" [ 1.693991] 0x000000100000-0x000010100000 : "ubi" [ 1.698714] mtd: partition "ubi" extends beyond the end of device "spi0.0" -- size truncated to 0xff00000 [ 2.263982] ubi0: attaching mtd1 [ 3.346306] ubi0: scanning is finished [ 3.392076] ubi0: attached mtd1 (name "ubi", size 255 MiB) [ 3.397593] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 3.404503] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 3.411312] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.418278] ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0 [ 3.424382] ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128 [ 3.431703] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 702916436 [ 3.440760] ubi0: available PEBs: 299, total reserved PEBs: 1741, PEBs reserved for bad PEB handling: 40 [ 3.450259] ubi0: background thread "ubi_bgt0d" started, PID 148 [ 3.451413] spi-nor spi0.1: unrecognized JEDEC id bytes: ff ef aa 22 00 00 [ 3.540048] airoha_eth 1fb50000.ethernet: generated random MAC address ba:20:6e:c4:ec:88 [ 3.549678] airoha-npu 1e900000.npu: L2C sram: 0x00, FPGA Stage: 0 [ 3.556480] airoha-npu 1e900000.npu: Direct firmware load for airoha/en7523_npu_rv32.bin failed with error -2 [ 3.566455] airoha-npu 1e900000.npu: Falling back to sysfs fallback for: airoha/en7523_npu_rv32.bin [ 64.550481] airoha-npu 1e900000.npu: error -ETIMEDOUT: failed to run npu firmware [ 64.557987] airoha-npu 1e900000.npu: probe with driver airoha-npu failed with error -110 [ 64.580240] mtk-eip93 1fb70000.crypto: EIP93:3:0:1,PE(0xfe007:0x41710041) [ 64.587582] NET: Registered PF_INET6 protocol family [ 64.593843] Segment Routing with IPv6 [ 64.597557] In-situ OAM (IOAM) with IPv6 [ 64.601618] NET: Registered PF_PACKET protocol family [ 64.606876] 8021q: 802.1Q VLAN Support v1.8 [ 64.611211] Registering SWP/SWPB emulation handler [ 64.636189] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode [ 64.643964] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx [ 64.664454] mt7530-mmio 1fb58000.switch lan1 (uninitialized): PHY [mt7530-0:09] driver [Airoha AN7523 PHY] (irq=POLL) [ 64.676053] mt7530-mmio 1fb58000.switch lan2 (uninitialized): PHY [mt7530-0:0a] driver [Airoha AN7523 PHY] (irq=POLL) [ 64.687551] mt7530-mmio 1fb58000.switch wan (uninitialized): PHY [mt7530-0:0b] driver [Airoha AN7523 PHY] (irq=POLL) [ 64.698978] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode [ 64.705759] DSA: tree 0 setup [ 64.709582] clk: Disabling unused clocks [ 64.713575] PM: genpd: Disabling unused power domains [ 64.719073] /dev/root: Can't open blockdev [ 64.723258] VFS: Cannot open root device "/dev/ram0" or unknown-block(0,0): error -6 [ 64.731030] Please append a correct "root=" boot option; here are the available partitions: [ 64.739388] 1f00 1024 mtdblock0 [ 64.739396] (driver?) [ 64.745955] 1f01 261120 mtdblock1 [ 64.745962] (driver?) [ 64.752519] List of all bdev filesystems: [ 64.756524] squashfs [ 64.756529] [ 64.760284] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 64.768601] Rebooting in 1 seconds..