EN7523DRAMC V0.5

dram_type = 5, speed = 1866

Final Impdance Cal Result: OCDP:0x14, OCDN:0x17, ODTP:0x6, ODTN:0x6

DDR1866 PLL setting init

[Dramc] PCDDR3 AC Timing update 

Fire MRW command...

ModeReg.2, value.0x20 done

Fire MRW command...

ModeReg.3, value.0x0 done

Fire MRW command...

ModeReg.1, value.0x6 done

Fire MRW command...

ModeReg.0, value.0x1114 done

Fire MRW command...

ModeReg.1, value.0x86 done

Fire MRW command...

ModeReg.1, value.0x6 done

Calculate size.

DRAM size=512MB



U-Boot 2023.07.02-OpenWrt-r23630-842932a63d-00059-g88f17672a-dirty (Sep 10 2024 - 13:20:35 +0200)

CPU:   Airoha EN7529DT
DRAM:  496 MiB
Core:  7 devices, 6 uclasses, devicetree: fit
spi-nand: spi_nand spinand@0: Winbond SPI NAND was found.
spi-nand: spi_nand spinand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
+ 0x000000000000-0x000010000000 : "spi-nand0"
  + 0x000000000000-0x000000100000 : "u-boot"
  + 0x000000100000-0x000010000000 : "ubi"
In:    serial@1fbf0000
Out:   serial@1fbf0000
Err:   serial@1fbf0000
Net:   eth0: en75xx-eth
Loading Environment from UBI... ubi0: default fastmap pool size: 100
ubi0: default fastmap WL pool size: 50
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "ubi", size 255 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 702916436
ubi0: available PEBs: 297, total reserved PEBs: 1743, PEBs reserved for bad PEB handling: 40
Read 126976 bytes from volume env1 to 9eaf2980
Read 126976 bytes from volume env2 to 9eb119c0
OK
apply matching dtb: en7523-pixly-r2
Autoboot in 2 seconds
=>               tftpboot 0x96000000 openwrt-airoha-en7523-heimgard_cx30-initramfs-kernel.bin
en75xx-eth: using internal switch
Using en75xx-eth device
TFTP from server 192.168.1.100; our IP address is 192.168.1.1
Filename 'openwrt-airoha-en7523-heimgard_cx30-initramfs-kernel.bin'.
Load address: 0x96000000
Loading: *##################################################  23.2 MiB
	 523.4 KiB/s
done
Bytes transferred = 24328880 (1733ab0 hex)
=> bootm 0xx 96000000
## Loading kernel from FIT Image at 96000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM OpenWrt Linux-6.12.80
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x960000e4
     Data Size:    24313848 Bytes = 23.2 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   0b8a6099
     Hash algo:    sha1
     Hash value:   5663f529e50ecd65cdd755d11b2d6ff7a87362c2
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 96000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM OpenWrt heimgard_cx30 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x97730214
     Data Size:    13658 Bytes = 13.3 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   a6f79ef1
     Hash algo:    sha1
     Hash value:   be9058187bad66d6c84de7211070094cb847a90e
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x97730214
Working FDT set to 97730214
   Uncompressing Kernel Image
lzma compressed: uncompress error 7
Must RESET board to recover
resetting ...
Secure key does not exist


EN7523DRAMC V0.5

dram_type = 5, speed = 1866

Final Impdance Cal Result: OCDP:0x14, OCDN:0x17, ODTP:0x6, ODTN:0x6

DDR1866 PLL setting init

[Dramc] PCDDR3 AC Timing update 

Fire MRW command...

ModeReg.2, value.0x20 done

Fire MRW command...

ModeReg.3, value.0x0 done

Fire MRW command...

ModeReg.1, value.0x6 done

Fire MRW command...

ModeReg.0, value.0x1114 done

Fire MRW command...

ModeReg.1, value.0x86 done

Fire MRW command...

ModeReg.1, value.0x6 done

Calculate size.

DRAM size=512MB



U-Boot 2023.07.02-OpenWrt-r23630-842932a63d-00059-g88f17672a-dirty (Sep 10 2024 - 13:20:35 +0200)

CPU:   Airoha EN7529DT
DRAM:  496 MiB
Core:  7 devices, 6 uclasses, devicetree: fit
spi-nand: spi_nand spinand@0: Winbond SPI NAND was found.
spi-nand: spi_nand spinand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
+ 0x000000000000-0x000010000000 : "spi-nand0"
  + 0x000000000000-0x000000100000 : "u-boot"
  + 0x000000100000-0x000010000000 : "ubi"
In:    serial@1fbf0000
Out:   serial@1fbf0000
Err:   serial@1fbf0000
Net:   eth0: en75xx-eth
Loading Environment from UBI... ubi0: default fastmap pool size: 100
ubi0: default fastmap WL pool size: 50
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "ubi", size 255 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 702916436
ubi0: available PEBs: 297, total reserved PEBs: 1743, PEBs reserved for bad PEB handling: 40
Read 126976 bytes from volume env1 to 9eaf2980
Read 126976 bytes from volume env2 to 9eb119c0
OK
apply matching dtb: en7523-pixly-r2
Autoboot in 2 seconds
=>     bootm     tftpboot 0x8 90000000 openwrt-airoha-en7523-heimgard_cx30-initramfs-kernel.bin
en75xx-eth: using internal switch
Using en75xx-eth device
TFTP from server 192.168.1.100; our IP address is 192.168.1.1
Filename 'openwrt-airoha-en7523-heimgard_cx30-initramfs-kernel.bin'.
Load address: 0x90000000
Loading: *##################################################  23.2 MiB
	 523.4 KiB/s
done
Bytes transferred = 24328880 (1733ab0 hex)
=> bootm 09 x90000000
## Loading kernel from FIT Image at 90000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM OpenWrt Linux-6.12.80
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x900000e4
     Data Size:    24313848 Bytes = 23.2 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   0b8a6099
     Hash algo:    sha1
     Hash value:   5663f529e50ecd65cdd755d11b2d6ff7a87362c2
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 90000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM OpenWrt heimgard_cx30 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x91730214
     Data Size:    13658 Bytes = 13.3 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   a6f79ef1
     Hash algo:    sha1
     Hash value:   be9058187bad66d6c84de7211070094cb847a90e
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x91730214
Working FDT set to 91730214
   Uncompressing Kernel Image
lzma compressed: uncompress error 7
Must RESET board to recover
resetting ...
Secure key does not exist


EN7523DRAMC V0.5

dram_type = 5, speed = 1866

Final Impdance Cal Result: OCDP:0x14, OCDN:0x17, ODTP:0x6, ODTN:0x6

DDR1866 PLL setting init

[Dramc] PCDDR3 AC Timing update 

Fire MRW command...

ModeReg.2, value.0x20 done

Fire MRW command...

ModeReg.3, value.0x0 done

Fire MRW command...

ModeReg.1, value.0x6 done

Fire MRW command...

ModeReg.0, value.0x1114 done

Fire MRW command...

ModeReg.1, value.0x86 done

Fire MRW command...

ModeReg.1, value.0x6 done

Calculate size.

DRAM size=512MB



U-Boot 2023.07.02-OpenWrt-r23630-842932a63d-00059-g88f17672a-dirty (Sep 10 2024 - 13:20:35 +0200)

CPU:   Airoha EN7529DT
DRAM:  496 MiB
Core:  7 devices, 6 uclasses, devicetree: fit
spi-nand: spi_nand spinand@0: Winbond SPI NAND was found.
spi-nand: spi_nand spinand@0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
+ 0x000000000000-0x000010000000 : "spi-nand0"
  + 0x000000000000-0x000000100000 : "u-boot"
  + 0x000000100000-0x000010000000 : "ubi"
In:    serial@1fbf0000
Out:   serial@1fbf0000
Err:   serial@1fbf0000
Net:   eth0: en75xx-eth
Loading Environment from UBI... ubi0: default fastmap pool size: 100
ubi0: default fastmap WL pool size: 50
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "ubi", size 255 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2040, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 11, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 702916436
ubi0: available PEBs: 297, total reserved PEBs: 1743, PEBs reserved for bad PEB handling: 40
Read 126976 bytes from volume env1 to 9eaf2980
Read 126976 bytes from volume env2 to 9eb119c0
OK
apply matching dtb: en7523-pixly-r2
Autoboot in 2 seconds
=>