forked from Openwrt-EcoNet/openwrt
19d5619479
Add STM32MP157C-DK2 support. This profile also supports the STM32MP157F-DK2 board. The only difference between these two boards is the CPU frequency (650MHz for 157C and 800MHz for 157F). A SCMI variant is available. With this variant the reset and clock resources are provided by OP-TEE and the associated SCMI services. It is the configuration recommended by STMicroelectronics, with secured system resources. The specifications bellow only list supported features. Specifications -------------- SOC: STM32MP157C RAM: 512 MiB Storage: SD Card Ethernet: 1x 1 Gbps Wireless: 2.4GHz Cypress CYW43455 (802.11b/g/n) LEDs: Heartbeat (Blue) USB: 4x 2.0 Type-A Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://github.com/openwrt/openwrt/pull/18119 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
127 lines
4.4 KiB
Diff
127 lines
4.4 KiB
Diff
From b1468a44e0c0f43a06e027efeff4183b3aee0cf7 Mon Sep 17 00:00:00 2001
|
|
From: Christophe Roullier <christophe.roullier@foss.st.com>
|
|
Date: Mon, 10 Jun 2024 10:03:08 +0200
|
|
Subject: [PATCH 3/5] ARM: dts: stm32: add ethernet1/2 RMII pins for
|
|
STM32MP13F-DK board
|
|
|
|
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
|
|
ethernet1: RMII with crystal.
|
|
ethernet2: RMII without crystal.
|
|
Add analog gpio pin configuration ("sleep") to manage power mode on
|
|
stm32mp13.
|
|
|
|
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
|
|
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
---
|
|
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 98 +++++++++++++++++++++
|
|
1 file changed, 98 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
|
|
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
|
|
@@ -13,6 +13,104 @@
|
|
};
|
|
};
|
|
|
|
+ eth1_rgmii_pins_a: eth1-rgmii-0 {
|
|
+ pins1 {
|
|
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
|
|
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
|
|
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
|
|
+ <STM32_PINMUX('E', 5, AF10)>, /* ETH_RGMII_TXD3 */
|
|
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
|
|
+ <STM32_PINMUX('C', 1, AF11)>, /* ETH_RGMII_GTX_CLK */
|
|
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
|
|
+ <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
|
|
+ bias-disable;
|
|
+ drive-push-pull;
|
|
+ slew-rate = <2>;
|
|
+ };
|
|
+
|
|
+ pins2 {
|
|
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
|
|
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
|
|
+ <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
|
|
+ <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
|
|
+ <STM32_PINMUX('A', 7, AF11)>, /* ETH_RGMII_RX_CTL */
|
|
+ <STM32_PINMUX('D', 7, AF10)>; /* ETH_RGMII_RX_CLK */
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ eth1_rmii_pins_a: eth1-rmii-0 {
|
|
+ pins1 {
|
|
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */
|
|
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */
|
|
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */
|
|
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
|
|
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
|
|
+ <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
|
|
+ bias-disable;
|
|
+ drive-push-pull;
|
|
+ slew-rate = <1>;
|
|
+ };
|
|
+
|
|
+ pins2 {
|
|
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
|
|
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */
|
|
+ <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ };
|
|
+
|
|
+ eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 {
|
|
+ pins1 {
|
|
+ pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */
|
|
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */
|
|
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */
|
|
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */
|
|
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
|
|
+ <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
|
|
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */
|
|
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */
|
|
+ <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ eth2_rmii_pins_a: eth2-rmii-0 {
|
|
+ pins1 {
|
|
+ pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */
|
|
+ <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */
|
|
+ <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */
|
|
+ <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */
|
|
+ <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */
|
|
+ <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
|
|
+ bias-disable;
|
|
+ drive-push-pull;
|
|
+ slew-rate = <1>;
|
|
+ };
|
|
+
|
|
+ pins2 {
|
|
+ pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */
|
|
+ <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */
|
|
+ <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 {
|
|
+ pins1 {
|
|
+ pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */
|
|
+ <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */
|
|
+ <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */
|
|
+ <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */
|
|
+ <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
|
|
+ <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
|
|
+ <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */
|
|
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */
|
|
+ <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */
|
|
+ };
|
|
+ };
|
|
+
|
|
i2c1_pins_a: i2c1-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
|