openwrt_mitrastar/target/linux/qualcommbe/patches-6.12/0329-net-ethernet-qualcomm-Initialize-PPE-queue-settings.patch

From 63874f7c2e46f192e43e6214d66236372e36396c Mon Sep 17 00:00:00 2001
From: Luo Jie <quic_luoj@quicinc.com>
Date: Sun, 9 Feb 2025 22:29:41 +0800
Subject: [PATCH] net: ethernet: qualcomm: Initialize PPE queue settings

Configure unicast and multicast hardware queues for the PPE
ports to enable packet forwarding between the ports.

Each PPE port is assigned with a range of queues. The queue ID
selection for a packet is decided by the queue base and queue
offset that is configured based on the internal priority and
the RSS hash value of the packet.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 .../net/ethernet/qualcomm/ppe/ppe_config.c    | 356 +++++++++++++++++-
 .../net/ethernet/qualcomm/ppe/ppe_config.h    |  63 ++++
 drivers/net/ethernet/qualcomm/ppe/ppe_regs.h  |  21 ++
 3 files changed, 439 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/qualcomm/ppe/ppe_config.c
+++ b/drivers/net/ethernet/qualcomm/ppe/ppe_config.c
@@ -128,6 +128,34 @@ struct ppe_scheduler_port_config {
 	unsigned int drr_node_id;
 };
 
+/**
+ * struct ppe_port_schedule_resource - PPE port scheduler resource.
+ * @ucastq_start: Unicast queue start ID.
+ * @ucastq_end: Unicast queue end ID.
+ * @mcastq_start: Multicast queue start ID.
+ * @mcastq_end: Multicast queue end ID.
+ * @flow_id_start: Flow start ID.
+ * @flow_id_end: Flow end ID.
+ * @l0node_start: Scheduler node start ID for queue level.
+ * @l0node_end: Scheduler node end ID for queue level.
+ * @l1node_start: Scheduler node start ID for flow level.
+ * @l1node_end: Scheduler node end ID for flow level.
+ *
+ * PPE scheduler resource allocated among the PPE ports.
+ */
+struct ppe_port_schedule_resource {
+	unsigned int ucastq_start;
+	unsigned int ucastq_end;
+	unsigned int mcastq_start;
+	unsigned int mcastq_end;
+	unsigned int flow_id_start;
+	unsigned int flow_id_end;
+	unsigned int l0node_start;
+	unsigned int l0node_end;
+	unsigned int l1node_start;
+	unsigned int l1node_end;
+};
+
 /* Assign the share buffer number 1550 to group 0 by default. */
 static const int ipq9574_ppe_bm_group_config = 1550;
 
@@ -676,6 +704,111 @@ static const struct ppe_scheduler_port_c
 	},
 };
 
+/* The scheduler resource is applied to each PPE port, The resource
+ * includes the unicast & multicast queues, flow nodes and DRR nodes.
+ */
+static const struct ppe_port_schedule_resource ppe_scheduler_res[] = {
+	{	.ucastq_start	= 0,
+		.ucastq_end	= 63,
+		.mcastq_start	= 256,
+		.mcastq_end	= 271,
+		.flow_id_start	= 0,
+		.flow_id_end	= 0,
+		.l0node_start	= 0,
+		.l0node_end	= 7,
+		.l1node_start	= 0,
+		.l1node_end	= 0,
+	},
+	{	.ucastq_start	= 144,
+		.ucastq_end	= 159,
+		.mcastq_start	= 272,
+		.mcastq_end	= 275,
+		.flow_id_start	= 36,
+		.flow_id_end	= 39,
+		.l0node_start	= 48,
+		.l0node_end	= 63,
+		.l1node_start	= 8,
+		.l1node_end	= 11,
+	},
+	{	.ucastq_start	= 160,
+		.ucastq_end	= 175,
+		.mcastq_start	= 276,
+		.mcastq_end	= 279,
+		.flow_id_start	= 40,
+		.flow_id_end	= 43,
+		.l0node_start	= 64,
+		.l0node_end	= 79,
+		.l1node_start	= 12,
+		.l1node_end	= 15,
+	},
+	{	.ucastq_start	= 176,
+		.ucastq_end	= 191,
+		.mcastq_start	= 280,
+		.mcastq_end	= 283,
+		.flow_id_start	= 44,
+		.flow_id_end	= 47,
+		.l0node_start	= 80,
+		.l0node_end	= 95,
+		.l1node_start	= 16,
+		.l1node_end	= 19,
+	},
+	{	.ucastq_start	= 192,
+		.ucastq_end	= 207,
+		.mcastq_start	= 284,
+		.mcastq_end	= 287,
+		.flow_id_start	= 48,
+		.flow_id_end	= 51,
+		.l0node_start	= 96,
+		.l0node_end	= 111,
+		.l1node_start	= 20,
+		.l1node_end	= 23,
+	},
+	{	.ucastq_start	= 208,
+		.ucastq_end	= 223,
+		.mcastq_start	= 288,
+		.mcastq_end	= 291,
+		.flow_id_start	= 52,
+		.flow_id_end	= 55,
+		.l0node_start	= 112,
+		.l0node_end	= 127,
+		.l1node_start	= 24,
+		.l1node_end	= 27,
+	},
+	{	.ucastq_start	= 224,
+		.ucastq_end	= 239,
+		.mcastq_start	= 292,
+		.mcastq_end	= 295,
+		.flow_id_start	= 56,
+		.flow_id_end	= 59,
+		.l0node_start	= 128,
+		.l0node_end	= 143,
+		.l1node_start	= 28,
+		.l1node_end	= 31,
+	},
+	{	.ucastq_start	= 240,
+		.ucastq_end	= 255,
+		.mcastq_start	= 296,
+		.mcastq_end	= 299,
+		.flow_id_start	= 60,
+		.flow_id_end	= 63,
+		.l0node_start	= 144,
+		.l0node_end	= 159,
+		.l1node_start	= 32,
+		.l1node_end	= 35,
+	},
+	{	.ucastq_start	= 64,
+		.ucastq_end	= 143,
+		.mcastq_start	= 0,
+		.mcastq_end	= 0,
+		.flow_id_start	= 1,
+		.flow_id_end	= 35,
+		.l0node_start	= 8,
+		.l0node_end	= 47,
+		.l1node_start	= 1,
+		.l1node_end	= 7,
+	},
+};
+
 /* Set the PPE queue level scheduler configuration. */
 static int ppe_scheduler_l0_queue_map_set(struct ppe_device *ppe_dev,
 					  int node_id, int port,
@@ -807,6 +940,149 @@ int ppe_queue_scheduler_set(struct ppe_d
 					      port, scheduler_cfg);
 }
 
+/**
+ * ppe_queue_ucast_base_set - Set PPE unicast queue base ID and profile ID
+ * @ppe_dev: PPE device
+ * @queue_dst: PPE queue destination configuration
+ * @queue_base: PPE queue base ID
+ * @profile_id: Profile ID
+ *
+ * The PPE unicast queue base ID and profile ID are configured based on the
+ * destination port information that can be service code or CPU code or the
+ * destination port.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int ppe_queue_ucast_base_set(struct ppe_device *ppe_dev,
+			     struct ppe_queue_ucast_dest queue_dst,
+			     int queue_base, int profile_id)
+{
+	int index, profile_size;
+	u32 val, reg;
+
+	profile_size = queue_dst.src_profile << 8;
+	if (queue_dst.service_code_en)
+		index = PPE_QUEUE_BASE_SERVICE_CODE + profile_size +
+			queue_dst.service_code;
+	else if (queue_dst.cpu_code_en)
+		index = PPE_QUEUE_BASE_CPU_CODE + profile_size +
+			queue_dst.cpu_code;
+	else
+		index = profile_size + queue_dst.dest_port;
+
+	val = FIELD_PREP(PPE_UCAST_QUEUE_MAP_TBL_PROFILE_ID, profile_id);
+	val |= FIELD_PREP(PPE_UCAST_QUEUE_MAP_TBL_QUEUE_ID, queue_base);
+	reg = PPE_UCAST_QUEUE_MAP_TBL_ADDR + index * PPE_UCAST_QUEUE_MAP_TBL_INC;
+
+	return regmap_write(ppe_dev->regmap, reg, val);
+}
+
+/**
+ * ppe_queue_ucast_offset_pri_set - Set PPE unicast queue offset based on priority
+ * @ppe_dev: PPE device
+ * @profile_id: Profile ID
+ * @priority: PPE internal priority to be used to set queue offset
+ * @queue_offset: Queue offset used for calculating the destination queue ID
+ *
+ * The PPE unicast queue offset is configured based on the PPE
+ * internal priority.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int ppe_queue_ucast_offset_pri_set(struct ppe_device *ppe_dev,
+				   int profile_id,
+				   int priority,
+				   int queue_offset)
+{
+	u32 val, reg;
+	int index;
+
+	index = (profile_id << 4) + priority;
+	val = FIELD_PREP(PPE_UCAST_PRIORITY_MAP_TBL_CLASS, queue_offset);
+	reg = PPE_UCAST_PRIORITY_MAP_TBL_ADDR + index * PPE_UCAST_PRIORITY_MAP_TBL_INC;
+
+	return regmap_write(ppe_dev->regmap, reg, val);
+}
+
+/**
+ * ppe_queue_ucast_offset_hash_set - Set PPE unicast queue offset based on hash
+ * @ppe_dev: PPE device
+ * @profile_id: Profile ID
+ * @rss_hash: Packet hash value to be used to set queue offset
+ * @queue_offset: Queue offset used for calculating the destination queue ID
+ *
+ * The PPE unicast queue offset is configured based on the RSS hash value.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int ppe_queue_ucast_offset_hash_set(struct ppe_device *ppe_dev,
+				    int profile_id,
+				    int rss_hash,
+				    int queue_offset)
+{
+	u32 val, reg;
+	int index;
+
+	index = (profile_id << 8) + rss_hash;
+	val = FIELD_PREP(PPE_UCAST_HASH_MAP_TBL_HASH, queue_offset);
+	reg = PPE_UCAST_HASH_MAP_TBL_ADDR + index * PPE_UCAST_HASH_MAP_TBL_INC;
+
+	return regmap_write(ppe_dev->regmap, reg, val);
+}
+
+/**
+ * ppe_port_resource_get - Get PPE resource per port
+ * @ppe_dev: PPE device
+ * @port: PPE port
+ * @type: Resource type
+ * @res_start: Resource start ID returned
+ * @res_end: Resource end ID returned
+ *
+ * PPE resource is assigned per PPE port, which is acquired for QoS scheduler.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int ppe_port_resource_get(struct ppe_device *ppe_dev, int port,
+			  enum ppe_resource_type type,
+			  int *res_start, int *res_end)
+{
+	struct ppe_port_schedule_resource res;
+
+	/* The reserved resource with the maximum port ID of PPE is
+	 * also allowed to be acquired.
+	 */
+	if (port > ppe_dev->num_ports)
+		return -EINVAL;
+
+	res = ppe_scheduler_res[port];
+	switch (type) {
+	case PPE_RES_UCAST:
+		*res_start = res.ucastq_start;
+		*res_end = res.ucastq_end;
+		break;
+	case PPE_RES_MCAST:
+		*res_start = res.mcastq_start;
+		*res_end = res.mcastq_end;
+		break;
+	case PPE_RES_FLOW_ID:
+		*res_start = res.flow_id_start;
+		*res_end = res.flow_id_end;
+		break;
+	case PPE_RES_L0_NODE:
+		*res_start = res.l0node_start;
+		*res_end = res.l0node_end;
+		break;
+	case PPE_RES_L1_NODE:
+		*res_start = res.l1node_start;
+		*res_end = res.l1node_end;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int ppe_config_bm_threshold(struct ppe_device *ppe_dev, int bm_port_id,
 				   const struct ppe_bm_port_config port_cfg)
 {
@@ -1140,6 +1416,80 @@ sch_config_fail:
 	return ret;
 };
 
+/* Configure PPE queue destination of each PPE port. */
+static int ppe_queue_dest_init(struct ppe_device *ppe_dev)
+{
+	int ret, port_id, index, q_base, q_offset, res_start, res_end, pri_max;
+	struct ppe_queue_ucast_dest queue_dst;
+
+	for (port_id = 0; port_id < ppe_dev->num_ports; port_id++) {
+		memset(&queue_dst, 0, sizeof(queue_dst));
+
+		ret = ppe_port_resource_get(ppe_dev, port_id, PPE_RES_UCAST,
+					    &res_start, &res_end);
+		if (ret)
+			return ret;
+
+		q_base = res_start;
+		queue_dst.dest_port = port_id;
+
+		/* Configure queue base ID and profile ID that is same as
+		 * physical port ID.
+		 */
+		ret = ppe_queue_ucast_base_set(ppe_dev, queue_dst,
+					       q_base, port_id);
+		if (ret)
+			return ret;
+
+		/* Queue priority range supported by each PPE port */
+		ret = ppe_port_resource_get(ppe_dev, port_id, PPE_RES_L0_NODE,
+					    &res_start, &res_end);
+		if (ret)
+			return ret;
+
+		pri_max = res_end - res_start;
+
+		/* Redirect ARP reply packet with the max priority on CPU port,
+		 * which keeps the ARP reply directed to CPU (CPU code is 101)
+		 * with highest priority queue of EDMA.
+		 */
+		if (port_id == 0) {
+			memset(&queue_dst, 0, sizeof(queue_dst));
+
+			queue_dst.cpu_code_en = true;
+			queue_dst.cpu_code = 101;
+			ret = ppe_queue_ucast_base_set(ppe_dev, queue_dst,
+						       q_base + pri_max,
+						       0);
+			if (ret)
+				return ret;
+		}
+
+		/* Initialize the queue offset of internal priority. */
+		for (index = 0; index < PPE_QUEUE_INTER_PRI_NUM; index++) {
+			q_offset = index > pri_max ? pri_max : index;
+
+			ret = ppe_queue_ucast_offset_pri_set(ppe_dev, port_id,
+							     index, q_offset);
+			if (ret)
+				return ret;
+		}
+
+		/* Initialize the queue offset of RSS hash as 0 to avoid the
+		 * random hardware value that will lead to the unexpected
+		 * destination queue generated.
+		 */
+		for (index = 0; index < PPE_QUEUE_HASH_NUM; index++) {
+			ret = ppe_queue_ucast_offset_hash_set(ppe_dev, port_id,
+							      index, 0);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
 int ppe_hw_config(struct ppe_device *ppe_dev)
 {
 	int ret;
@@ -1152,5 +1502,9 @@ int ppe_hw_config(struct ppe_device *ppe
 	if (ret)
 		return ret;
 
-	return ppe_config_scheduler(ppe_dev);
+	ret = ppe_config_scheduler(ppe_dev);
+	if (ret)
+		return ret;
+
+	return ppe_queue_dest_init(ppe_dev);
 }
--- a/drivers/net/ethernet/qualcomm/ppe/ppe_config.h
+++ b/drivers/net/ethernet/qualcomm/ppe/ppe_config.h
@@ -8,6 +8,16 @@
 
 #include "ppe.h"
 
+/* There are different table index ranges for configuring queue base ID of
+ * the destination port, CPU code and service code.
+ */
+#define PPE_QUEUE_BASE_DEST_PORT		0
+#define PPE_QUEUE_BASE_CPU_CODE			1024
+#define PPE_QUEUE_BASE_SERVICE_CODE		2048
+
+#define PPE_QUEUE_INTER_PRI_NUM			16
+#define PPE_QUEUE_HASH_NUM			256
+
 /**
  * enum ppe_scheduler_frame_mode - PPE scheduler frame mode.
  * @PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC: The scheduled frame includes IPG,
@@ -42,8 +52,61 @@ struct ppe_scheduler_cfg {
 	enum ppe_scheduler_frame_mode frame_mode;
 };
 
+/**
+ * enum ppe_resource_type - PPE resource type.
+ * @PPE_RES_UCAST: Unicast queue resource.
+ * @PPE_RES_MCAST: Multicast queue resource.
+ * @PPE_RES_L0_NODE: Level 0 for queue based node resource.
+ * @PPE_RES_L1_NODE: Level 1 for flow based node resource.
+ * @PPE_RES_FLOW_ID: Flow based node resource.
+ */
+enum ppe_resource_type {
+	PPE_RES_UCAST,
+	PPE_RES_MCAST,
+	PPE_RES_L0_NODE,
+	PPE_RES_L1_NODE,
+	PPE_RES_FLOW_ID,
+};
+
+/**
+ * struct ppe_queue_ucast_dest - PPE unicast queue destination.
+ * @src_profile: Source profile.
+ * @service_code_en: Enable service code to map the queue base ID.
+ * @service_code: Service code.
+ * @cpu_code_en: Enable CPU code to map the queue base ID.
+ * @cpu_code: CPU code.
+ * @dest_port: destination port.
+ *
+ * PPE egress queue ID is decided by the service code if enabled, otherwise
+ * by the CPU code if enabled, or by destination port if both service code
+ * and CPU code are disabled.
+ */
+struct ppe_queue_ucast_dest {
+	int src_profile;
+	bool service_code_en;
+	int service_code;
+	bool cpu_code_en;
+	int cpu_code;
+	int dest_port;
+};
+
 int ppe_hw_config(struct ppe_device *ppe_dev);
 int ppe_queue_scheduler_set(struct ppe_device *ppe_dev,
 			    int node_id, bool flow_level, int port,
 			    struct ppe_scheduler_cfg scheduler_cfg);
+int ppe_queue_ucast_base_set(struct ppe_device *ppe_dev,
+			     struct ppe_queue_ucast_dest queue_dst,
+			     int queue_base,
+			     int profile_id);
+int ppe_queue_ucast_offset_pri_set(struct ppe_device *ppe_dev,
+				   int profile_id,
+				   int priority,
+				   int queue_offset);
+int ppe_queue_ucast_offset_hash_set(struct ppe_device *ppe_dev,
+				    int profile_id,
+				    int rss_hash,
+				    int queue_offset);
+int ppe_port_resource_get(struct ppe_device *ppe_dev, int port,
+			  enum ppe_resource_type type,
+			  int *res_start, int *res_end);
 #endif
--- a/drivers/net/ethernet/qualcomm/ppe/ppe_regs.h
+++ b/drivers/net/ethernet/qualcomm/ppe/ppe_regs.h
@@ -164,6 +164,27 @@
 #define PPE_BM_PORT_FC_SET_PRE_ALLOC(tbl_cfg, value)	\
 	u32p_replace_bits((u32 *)(tbl_cfg) + 0x1, value, PPE_BM_PORT_FC_W1_PRE_ALLOC)
 
+/* The queue base configurations based on destination port,
+ * service code or CPU code.
+ */
+#define PPE_UCAST_QUEUE_MAP_TBL_ADDR		0x810000
+#define PPE_UCAST_QUEUE_MAP_TBL_ENTRIES		3072
+#define PPE_UCAST_QUEUE_MAP_TBL_INC		0x10
+#define PPE_UCAST_QUEUE_MAP_TBL_PROFILE_ID	GENMASK(3, 0)
+#define PPE_UCAST_QUEUE_MAP_TBL_QUEUE_ID	GENMASK(11, 4)
+
+/* The queue offset configurations based on RSS hash value. */
+#define PPE_UCAST_HASH_MAP_TBL_ADDR		0x830000
+#define PPE_UCAST_HASH_MAP_TBL_ENTRIES		4096
+#define PPE_UCAST_HASH_MAP_TBL_INC		0x10
+#define PPE_UCAST_HASH_MAP_TBL_HASH		GENMASK(7, 0)
+
+/* The queue offset configurations based on PPE internal priority. */
+#define PPE_UCAST_PRIORITY_MAP_TBL_ADDR		0x842000
+#define PPE_UCAST_PRIORITY_MAP_TBL_ENTRIES	256
+#define PPE_UCAST_PRIORITY_MAP_TBL_INC		0x10
+#define PPE_UCAST_PRIORITY_MAP_TBL_CLASS	GENMASK(3, 0)
+
 /* PPE unicast queue (0-255) configurations. */
 #define PPE_AC_UNICAST_QUEUE_CFG_TBL_ADDR	0x848000
 #define PPE_AC_UNICAST_QUEUE_CFG_TBL_ENTRIES	256