forked from Openwrt-EcoNet/openwrt
a387c62114
Upstream uses a different filename, so lets rename our downstream mt7981.dtsi to mt7981b.dtsi and update the device tree of all MT7981 boards accordingly. This is to prepare for the switch to Linux 6.12 which is going to use the upstream mt7981b.dtsi (plus some patches on top). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
433 lines
7.4 KiB
Plaintext
433 lines
7.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include "mt7981b.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart0;
|
|
led-boot = &led_status_yellow;
|
|
led-failsafe = &led_status_yellow;
|
|
led-running = &led_status_blue;
|
|
led-upgrade = &led_status_yellow;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x10000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-mesh {
|
|
label = "mesh";
|
|
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_9>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
|
|
button-reset {
|
|
label = "reset";
|
|
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_status_blue: led-status-blue {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_status_yellow: led-status-yellow {
|
|
color = <LED_COLOR_ID_YELLOW>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio_bus {
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
mfd: mfd@1 {
|
|
compatible = "airoha,an8855-mfd";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "wan";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mfd {
|
|
efuse {
|
|
compatible = "airoha,an8855-efuse";
|
|
#nvmem-cell-cells = <0>;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
shift_sel_port0_tx_a: shift-sel-port0-tx-a@c {
|
|
reg = <0xc 0x4>;
|
|
};
|
|
|
|
shift_sel_port0_tx_b: shift-sel-port0-tx-b@10 {
|
|
reg = <0x10 0x4>;
|
|
};
|
|
|
|
shift_sel_port0_tx_c: shift-sel-port0-tx-c@14 {
|
|
reg = <0x14 0x4>;
|
|
};
|
|
|
|
shift_sel_port0_tx_d: shift-sel-port0-tx-d@18 {
|
|
reg = <0x18 0x4>;
|
|
};
|
|
|
|
shift_sel_port1_tx_a: shift-sel-port1-tx-a@1c {
|
|
reg = <0x1c 0x4>;
|
|
};
|
|
|
|
shift_sel_port1_tx_b: shift-sel-port1-tx-b@20 {
|
|
reg = <0x20 0x4>;
|
|
};
|
|
|
|
shift_sel_port1_tx_c: shift-sel-port1-tx-c@24 {
|
|
reg = <0x24 0x4>;
|
|
};
|
|
|
|
shift_sel_port1_tx_d: shift-sel-port1-tx-d@28 {
|
|
reg = <0x28 0x4>;
|
|
};
|
|
|
|
shift_sel_port2_tx_a: shift-sel-port2-tx-a@2c {
|
|
reg = <0x2c 0x4>;
|
|
};
|
|
|
|
shift_sel_port2_tx_b: shift-sel-port2-tx-b@30 {
|
|
reg = <0x30 0x4>;
|
|
};
|
|
|
|
shift_sel_port2_tx_c: shift-sel-port2-tx-c@34 {
|
|
reg = <0x34 0x4>;
|
|
};
|
|
|
|
shift_sel_port2_tx_d: shift-sel-port2-tx-d@38 {
|
|
reg = <0x38 0x4>;
|
|
};
|
|
|
|
shift_sel_port3_tx_a: shift-sel-port3-tx-a@4c {
|
|
reg = <0x4c 0x4>;
|
|
};
|
|
|
|
shift_sel_port3_tx_b: shift-sel-port3-tx-b@50 {
|
|
reg = <0x50 0x4>;
|
|
};
|
|
|
|
shift_sel_port3_tx_c: shift-sel-port3-tx-c@54 {
|
|
reg = <0x54 0x4>;
|
|
};
|
|
|
|
shift_sel_port3_tx_d: shift-sel-port3-tx-d@58 {
|
|
reg = <0x58 0x4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ethernet-switch {
|
|
compatible = "airoha,an8855-switch";
|
|
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
|
airoha,ext-surge;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "wan";
|
|
phy-mode = "internal";
|
|
phy-handle = <&internal_phy1>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
phy-mode = "internal";
|
|
phy-handle = <&internal_phy2>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan3";
|
|
phy-mode = "internal";
|
|
phy-handle = <&internal_phy3>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan4";
|
|
phy-mode = "internal";
|
|
phy-handle = <&internal_phy4>;
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
compatible = "airoha,an8855-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
internal_phy1: phy@1 {
|
|
reg = <1>;
|
|
|
|
nvmem-cells = <&shift_sel_port0_tx_a>,
|
|
<&shift_sel_port0_tx_b>,
|
|
<&shift_sel_port0_tx_c>,
|
|
<&shift_sel_port0_tx_d>;
|
|
nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
|
|
};
|
|
|
|
internal_phy2: phy@2 {
|
|
reg = <2>;
|
|
|
|
nvmem-cells = <&shift_sel_port1_tx_a>,
|
|
<&shift_sel_port1_tx_b>,
|
|
<&shift_sel_port1_tx_c>,
|
|
<&shift_sel_port1_tx_d>;
|
|
nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
|
|
};
|
|
|
|
internal_phy3: phy@3 {
|
|
reg = <3>;
|
|
|
|
nvmem-cells = <&shift_sel_port2_tx_a>,
|
|
<&shift_sel_port2_tx_b>,
|
|
<&shift_sel_port2_tx_c>,
|
|
<&shift_sel_port2_tx_d>;
|
|
nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
|
|
};
|
|
|
|
internal_phy4: phy@4 {
|
|
reg = <4>;
|
|
|
|
nvmem-cells = <&shift_sel_port3_tx_a>,
|
|
<&shift_sel_port3_tx_b>,
|
|
<&shift_sel_port3_tx_c>,
|
|
<&shift_sel_port3_tx_d>;
|
|
nvmem-cell-names = "tx_a", "tx_b", "tx_c", "tx_d";
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_flash_pins>;
|
|
status = "okay";
|
|
|
|
spi_nand: flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-nand";
|
|
reg = <0>;
|
|
|
|
spi-cal-enable;
|
|
spi-cal-mode = "read-data";
|
|
spi-cal-datalen = <7>;
|
|
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>;
|
|
spi-cal-addrlen = <5>;
|
|
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
|
|
|
spi-max-frequency = <52000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
partitions: partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "BL2";
|
|
reg = <0x00 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "Nvram";
|
|
reg = <0x100000 0x40000>;
|
|
};
|
|
|
|
partition@140000 {
|
|
label = "Bdata";
|
|
reg = <0x140000 0x40000>;
|
|
};
|
|
|
|
factory: partition@180000 {
|
|
label = "Factory";
|
|
reg = <0x180000 0x200000>;
|
|
read-only;
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
macaddr_factory_4: macaddr@4 {
|
|
compatible = "mac-base";
|
|
reg = <0x4 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
partition@380000 {
|
|
label = "FIP";
|
|
reg = <0x380000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@580000 {
|
|
label = "crash";
|
|
reg = <0x580000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5c0000 {
|
|
label = "crash_log";
|
|
reg = <0x5c0000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@7600000 {
|
|
label = "KF";
|
|
reg = <0x7600000 0x40000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
spi0_flash_pins: spi0-pins {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
|
|
conf-pu {
|
|
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
|
};
|
|
|
|
conf-pd {
|
|
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
|
drive-strength = <MTK_DRIVE_8mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|