Files
openwrt_mitrastar/target/linux/mediatek/dts/mt7981b-nokia-ea0326gmp.dts
Daniel Golle a387c62114 mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi
Upstream uses a different filename, so lets rename our downstream
mt7981.dtsi to mt7981b.dtsi and update the device tree of all
MT7981 boards accordingly.
This is to prepare for the switch to Linux 6.12 which is going to
use the upstream mt7981b.dtsi (plus some patches on top).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2025-05-26 16:58:03 +01:00

285 lines
4.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7981b.dtsi"
/ {
model = "Nokia EA0326GMP";
compatible = "nokia,ea0326gmp", "mediatek,mt7981";
aliases {
led-boot = &power_led;
led-running = &power_led;
led-failsafe = &power_led;
led-upgrade = &power_led;
label-mac-device = &gmac1;
serial0 = &uart0;
};
chosen {
rootdisk = <&ubi_rootdisk>;
stdout-path = "serial0:115200n8";
};
memory@40000000 {
reg = <0 0x40000000 0 0x10000000>;
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_led: led-0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_POWER;
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
};
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
};
led-2 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_WAN;
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
};
led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
};
led-4 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
};
led-5 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WPS;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
};
};
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_factory_28 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
nvmem-cells = <&macaddr_factory_28 3>;
nvmem-cell-names = "mac-address";
};
};
&mdio_bus {
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bl2";
reg = <0x00000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "factory";
reg = <0x180000 0x0200000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_28: macaddr@28 {
compatible = "mac-base";
reg = <0x28 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@380000 {
label = "fip";
reg = <0x380000 0x0200000>;
read-only;
};
partition@580000 {
label = "config";
reg = <0x580000 0x200000>;
read-only;
};
partition@780000 {
label = "config2";
reg = <0x780000 0x200000>;
read-only;
};
partition@980000 {
compatible = "linux,ubi";
label = "ubi";
reg = <0x980000 0x7680000>;
volumes {
ubi_rootdisk: ubi-volume-fit {
volname = "fit";
};
};
};
};
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
status = "okay";
};