Files
openwrt_mitrastar/target/linux/mediatek/dts/mt7981b-dlink-aquila-pro-ai-m30-a1.dts
Daniel Golle a387c62114 mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi
Upstream uses a different filename, so lets rename our downstream
mt7981.dtsi to mt7981b.dtsi and update the device tree of all
MT7981 boards accordingly.
This is to prepare for the switch to Linux 6.12 which is going to
use the upstream mt7981b.dtsi (plus some patches on top).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2025-05-26 16:58:03 +01:00

313 lines
5.0 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include "mt7981b.dtsi"
/ {
model = "D-Link AQUILA PRO AI M30 A1";
compatible = "dlink,aquila-pro-ai-m30-a1", "mediatek,mt7981";
aliases {
label-mac-device = &gmac0;
led-boot = &led_status_white;
led-failsafe = &led_status_red;
led-running = &led_status_white;
led-upgrade = &led_status_blue;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
};
button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
button-leds-on-off {
label = "leds-on-off";
linux,code = <KEY_LIGHTS_TOGGLE>;
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_odm 1>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
label = "internet";
nvmem-cells = <&macaddr_odm 0>;
nvmem-cell-names = "mac-address";
};
};
&mdio_bus {
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand@0 {
compatible = "spi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "Factory";
reg = <0x180000 0x200000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
};
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x200000>;
read-only;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x3200000>;
};
partition@3780000 {
label = "ubi1";
reg = <0x3780000 0x3200000>;
read-only;
};
partition@6980000 {
label = "Odm";
reg = <0x6980000 0x40000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_odm: macaddr@81 {
compatible = "mac-base";
reg = <0x81 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@69c0000 {
label = "Config1";
reg = <0x69c0000 0x80000>;
read-only;
};
partition@6a40000 {
label = "Config2";
reg = <0x6a40000 0x80000>;
read-only;
};
partition@6ac0000 {
label = "Storage";
reg = <0x6ac0000 0xA00000>;
read-only;
};
};
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
};
};
i2c_pins_g0: i2c-pins-g0 {
mux {
function = "i2c";
groups = "i2c0_1";
};
};
};
&wifi {
status = "okay";
nvmem-cells = <&eeprom_factory_0>, <&macaddr_odm 2>;
nvmem-cell-names = "eeprom", "mac-address";
};
&i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins_g0>;
gca230718@40 {
compatible = "unknown,gca230718";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40>;
led_status_red: led@0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
reg = <0>;
};
led@1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
reg = <1>;
};
led_status_blue: led@2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
reg = <2>;
};
led_status_white: led@3 {
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_STATUS;
reg = <3>;
};
};
};