Files
openwrt_mitrastar/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts
Daniel Golle a387c62114 mediatek: dts: rename mt7981.dtsi to mt7981b.dtsi
Upstream uses a different filename, so lets rename our downstream
mt7981.dtsi to mt7981b.dtsi and update the device tree of all
MT7981 boards accordingly.
This is to prepare for the switch to Linux 6.12 which is going to
use the upstream mt7981b.dtsi (plus some patches on top).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2025-05-26 16:58:03 +01:00

213 lines
3.7 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include "mt7981b.dtsi"
/ {
model = "Cudy M3000 v1";
compatible = "cudy,m3000-v1", "mediatek,mt7981";
aliases {
label-mac-device = &gmac0;
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_status: internet-white {
function = LED_FUNCTION_WAN_ONLINE;
color = <LED_COLOR_ID_WHITE>;
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
};
internet-red {
function = LED_FUNCTION_WAN_ONLINE;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
};
wan {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 5 GPIO_ACTIVE_LOW>;
};
lan {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
phy-handle = <&rtl8221b_phy>;
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_bdinfo_de00 1>;
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_bdinfo_de00 0>;
};
};
&mdio_bus {
rtl8221b_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <1>;
reset-assert-us = <100000>;
reset-deassert-us = <100000>;
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&pio>;
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand: spi_nand@0 {
compatible = "spi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x0180000 0x0200000>;
read-only;
};
bdinfo: partition@380000 {
label = "bdinfo";
reg = <0x0380000 0x0040000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_bdinfo_de00: macaddr@de00 {
#nvmem-cell-cells = <1>;
compatible = "mac-base";
reg = <0xde00 0x6>;
};
};
};
partition@3c0000 {
label = "FIP";
reg = <0x03c0000 0x0200000>;
read-only;
};
partition@5c0000 {
label = "ubi";
reg = <0x05c0000 0x4000000>;
};
};
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&wifi {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};