ZTE F670L Stock Boot log #3
kvn193
commented ```
Boot SPI NAND
start read bootheader
start read secondboot
non secure boot
Jump
enter bootloader...
crpm init enter
crpm init done
ddr init done
serial init start
serial init done
SPI NAND
non secure uboot
backup header!!
Jump
U-Boot 2013.04 (Sep 17 2022 - 09:29:17)
CPU : ZX279128S@A9,1000MHZ
Board: ZTE zx279128sevb
I2C: ready
DRAM: 128 MiB
,8000000,48000000
product_vid = 28
vid=28-F670L
output gpio:56, value=1, 0
output gpio:57, value=1, 0
output gpio:58, value=1, 0
output gpio:59, value=1, 0
mtk reset,45,53
mtk reset,46,55
bootsel=3
NAND: manuid=ef,aa
Manu ID: 0xef, Chip ID: 0xaa (Winbond SPI NAND W25N01GVZEIR+WINBOND 128MiB 3,3V)
128 MiB
<nand_read_skip_bad_,386>!mtdpart=0x1,offset=0x0,mtdpartoffset=0x180000,mtdPartsize=0x80000,length=0x20000
In: serial
Out: serial
Err: serial
clk_pll env is not setted, core clk won't change
Net: enter ref_clk_set.. mode = 0 .
enter pll_cfg_fractional
ref_clk_set success!
gpon serdes init
rxpll_ready
addr 0x9400004c before value is 38000
addr 0x9400004c after value is 381ff
eth0
Hit 1 to upgrade software version
Hit any key to stop autoboot: 0
=> ?
? - alias for 'help'
autorun - start version
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootk - boot kernel
bootm - boot application image from memory
bootz - boot Linux zImage image from memory
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
dhcp - boot image via network using DHCP/TFTP protocol
downver - upgrade software downloaded from TFTP server
echo - echo args to console
fdt - flattened device tree utility commands
fsinfo - print information about filesystems
fsload - load binary file from a filesystem image
go - start application at address 'addr'
gpiotest- gpiotest dir [num] [in/out]
gpiotest value [num] [1/0]
gpiotest gvalue [num]
help - print command description/usage
i2c - I2C sub-system
imxtract- extract a part of a multi-image
itest - return true/false on integer compare
ls - list files in a directory (default /)
md - memory display
mii - MII utility commands
mt - memory test
mtddebug- mtddebug operate
mtest - simple RAM read/write test
mw - memory write (fill)
nand - NAND sub-system
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
tftp - boot image via network using TFTP protocol
version - print monitor, compiler and linker version
watchdog- watchdog reset && disable
xmodem - xmodem
=> printenv
baudrate=115200
bootcmd=setenv bootargs console=$(console) root=/dev/mtdblock9 ro rootfstype=jffs2 mem=$(memsize);bootm 0x44000000;
bootdelay=3
bootfile=uboot.bin
bootloaderfile=bootloader.bin
console=ttyAMA0,115200n8
env_na==@@;
env_pa==@@;
ethact=eth0
ethaddr=00:41:71:00:00:50
filesize=366316
fullfile=upgrade.bin
gatewayip=192.168.1.1
hostname=unknown
ipaddr=192.168.1.1
linuzfile=vmlinuz.bin
loadaddr=0x42000000
memsize=128M
netmask=255.255.255.0
netretry=5
serverip=192.168.1.100
stderr=serial
stdin=serial
stdout=serial
versioninfo=U-Boot V9.0.11P10N2 20220917101007 0x1a00000 0x0 0x8f 0x83
Environment size: 650/131068 bytes
=> bdinfo
arch_number = 0x00044258
boot_params = 0x40000100
DRAM bank = 0x00000000
-> start = 0x40000000
-> size = 0x08000000
eth0name = eth0
ethaddr = 00:41:71:00:00:50
current eth = eth0
ip_addr = 192.168.1.1
baudrate = 115200 bps
TLB addr = 0x47FF0000
relocaddr = 0x47F96000
reloc off = 0x00096000
irq_sp = 0x47555F40
sp start = 0x47555F30
=> coninfo
List of available devices:
serial 80000003 SIO stdin stdout stderr
zte_serial 00000003 .IO
=> boot
Wrong Image Format for bootm command
ERROR: can't get kernel image!
=>
Boot SPI NAND
start read bootheader
start read secondboot
non secure boot
Jump
enter bootloader...
crpm init enter
crpm init done
ddr init done
serial init start
serial init done
SPI NAND
non secure uboot
backup header!!
Jump
U-Boot 2013.04 (Sep 17 2022 - 09:29:17)
CPU : ZX279128S@A9,1000MHZ
Board: ZTE zx279128sevb
I2C: ready
DRAM: 128 MiB
,8000000,48000000
product_vid = 28
vid=28-F670L
output gpio:56, value=1, 0
output gpio:57, value=1, 0
output gpio:58, value=1, 0
output gpio:59, value=1, 0
mtk reset,45,53
mtk reset,46,55
bootsel=3
NAND: manuid=ef,aa
Manu ID: 0xef, Chip ID: 0xaa (Winbond SPI NAND W25N01GVZEIR+WINBOND 128MiB 3,3V)
128 MiB
<nand_read_skip_bad_,386>!mtdpart=0x1,offset=0x0,mtdpartoffset=0x180000,mtdPartsize=0x80000,length=0x20000
In: serial
Out: serial
Err: serial
clk_pll env is not setted, core clk won't change
Net: enter ref_clk_set.. mode = 0 .
enter pll_cfg_fractional
ref_clk_set success!
gpon serdes init
rxpll_ready
addr 0x9400004c before value is 38000
addr 0x9400004c after value is 381ff
eth0
Hit 1 to upgrade software version
Hit any key to stop autoboot: 0
=>
Boot SPI NAND
start read bootheader
start read secondboot
non secure boot
Jump
enter bootloader...
crpm init enter
crpm init done
ddr init done
serial init start
serial init done
SPI NAND
non secure uboot
backup header!!
Jump
U-Boot 2013.04 (Sep 17 2022 - 09:29:17)
CPU : ZX279128S@A9,1000MHZ
Board: ZTE zx279128sevb
I2C: ready
DRAM: 128 MiB
,8000000,48000000
product_vid = 28
vid=28-F670L
output gpio:56, value=1, 0
output gpio:57, value=1, 0
output gpio:58, value=1, 0
output gpio:59, value=1, 0
mtk reset,45,53
mtk reset,46,55
bootsel=3
NAND: manuid=ef,aa
Manu ID: 0xef, Chip ID: 0xaa (Winbond SPI NAND W25N01GVZEIR+WINBOND 128MiB 3,3V)
128 MiB
<nand_read_skip_bad_,386>!mtdpart=0x1,offset=0x0,mtdpartoffset=0x180000,mtdPartsize=0x80000,length=0x20000
In: serial
Out: serial
Err: serial
clk_pll env is not setted, core clk won't change
Net: enter ref_clk_set.. mode = 0 .
enter pll_cfg_fractional
ref_clk_set success!
gpon serdes init
rxpll_ready
addr 0x9400004c before value is 38000
addr 0x9400004c after value is 381ff
eth0
Hit 1 to upgrade software version
Hit any key to stop autoboot: 0
addr=1a00000
addr=3a00000
select=0x0
search=0x2
<nand_read_skip_bad_,386>!mtdpart=0x6,offset=0x0,mtdpartoffset=0x200000,mtdPartsize=0x400000,length=0x1000
tmp=0x00000000, value=0
select=0x0
search=0x2
---mtdparts_init--current_mtd_partnum=0-
dev id: type = 2, num = 0, size = 0xffffffff, mtd_id = single part
part : name = rootfs0, size = 0x01700000, offset = 0x01a20000
part : name = rootfs1, size = 0x01700000, offset = 0x03a20000
--- jffs2_part_info: partition number 0 for device nand0 (single part)
jffs2_part_info:rootfs0,1a20000
### JFFS2 loading '0uImage' to 0x44000000
Scanning JFFS2 FS: ....................... done.
### JFFS2 load complete: 3564310 bytes loaded to 0x44000000
<nand_read_skip_bad_,386>!mtdpart=0x0,offset=0x0,mtdpartoffset=0x0,mtdPartsize=0x180000,length=0x100000
lseek=0x42072800
cmdline=U-Boot V9.0.11P10N2 20220917101007
## Booting kernel from Legacy Image at 44000000 ...
Image Name: Linux Kernel Image
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3564246 Bytes = 3.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
----------------------
|-->setup versioninfo tag...
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.1.25 (@9d94d2767608) (gcc version 4.9.3 (GCC) ) #225 SMP Sat Sep 17 09:31:56 CST 2022
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: ZTE ZX279128S
Ignoring memory range 0x0 - 0x40000000
Ignoring memory block 0x0 - 0x20000000
in function:early_mem line: 810 zxic_mem_size = 0x8000000
zx279128_reserve_mem,264
ZX_RESERVE_MEM_SIZE is 1470000, 15
modename:bbx addr:46900000 size:000f4000
[bbxMemNotify][450]bbx get address ok!
[bbxMemNotify][451]s_dwBbxBaseAddr=0x46900000,s_dwBbxRsvMemLen=0x000f4000
Memory policy: Data cache writealloc
======= zx_map_io =======
BUG: mapping for 0x00400000 at 0xf0000000 out of vmalloc space
BUG: mapping for 0x00800000 at 0xf0100000 out of vmalloc space
BUG: mapping for 0x00a20000 at 0xf0200000 out of vmalloc space
BUG: mapping for 0x00c00000 at 0xf9602000 out of vmalloc space
BUG: mapping for 0x94000000 at 0xf0400000 out of vmalloc space
BUG: mapping for 0x94100000 at 0xf0500000 out of vmalloc space
BUG: mapping for 0x94200000 at 0xf0600000 out of vmalloc space
BUG: mapping for 0x94400000 at 0xf0700000 out of vmalloc space
BUG: mapping for 0x9a100000 at 0xf0800000 out of vmalloc space
BUG: mapping for 0x00d00000 at 0xf0900000 out of vmalloc space
BUG: mapping for 0x92000000 at 0xf4000000 out of vmalloc space
BUG: mapping for 0x00200000 at 0xf0a00000 out of vmalloc space
BUG: mapping for 0x9fe00000 at 0xf0f00000 out of vmalloc space
BUG: mapping for 0x09100000 at 0xf0b00000 out of vmalloc space
BUG: mapping for 0x09400000 at 0xf0c00000 out of vmalloc space
BUG: mapping for 0x09300000 at 0xf0d00000 out of vmalloc space
BUG: mapping for 0x09200000 at 0xf0e00000 out of vmalloc space
BUG: mapping for 0x46b00000 at 0xf1000000 out of vmalloc space
PERCPU: Embedded 11 pages/cpu @c67d9000 s14752 r8192 d22112 u45056
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttyAMA0,115200n8 root=/dev/mtdblock9 ro rootfstype=jffs2 mem=128M; U-Boot V9.0.11P10N2 20220917101007 0x1a00000 0x0 0x8f 0x83
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 97596K/131072K available (4768K kernel code, 297K rwdata, 1672K rodata, 212K init, 1671K bss, 33476K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc8800000 - 0xf0000000 ( 632 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc06522c8 (6441 kB)
.init : 0xc0653000 - 0xc0688000 ( 212 kB)
.data : 0xc0688000 - 0xc06d2660 ( 298 kB)
.bss : 0xc06d2660 - 0xc08742f4 (1672 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Additional per-CPU info printed with stalls.
NR_IRQS:16 nr_irqs:16 16
L2C: platform modifies aux control register: 0x02030000 -> 0x32430000
L2C: platform provided aux values permit register corruption.
L2C: DT/platform modifies aux control register: 0x02030000 -> 0x32430000
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 16 ways, 256 kB
L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x76430001
sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 4398046511103ns
clocksource arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x400081c0 - 0x400081f4
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3981.31 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
product_vid = 28
current_board=c069423c
0,c3ffffa,c3ffffa
1,e00030,e00030
2,555ffff,555ffff
3,3e3f85,3e3f85
output gpio:56, value=1, 0
output gpio:57, value=1, 0
output gpio:58, value=1, 0
output gpio:59, value=1, 0
bootsel=3
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
94404000.serial: ttyAMA0 at MMIO 0x94404000 (irq = 19, base_baud = 0) is a
console [ttyAMA0] enabled
94405000.serial: ttyAMA1 at MMIO 0x94405000 (irq = 20, base_baud = 0) is a
<pdt_wdt_init>(627):creat proc files for watchdog!!!
<pdt_wdt_init>(631):Starting Watchdog Timer...
arm A9 regs f0100620 cpu1 watchdog: heartbeat 20 sec, clock 3906250,max heartbeat 1099
enable watchdog in cpu0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
synopsys pcie probe enter!!!!!!
pcie0 irq is 37
pcie1 irq is 38
synopsys pcie0 controller setting
synopsys pcie0 controller waitting L0 state
pcie0 link up,gen1,cnt 11!
synopsys pcie1 controller setting
synopsys pcie1 controller waitting L0 state
pcie1 link up,gen1,cnt 10!
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x20000000-0x27ffffff]
pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: bus1: Fast back to back transfers disabled
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x100fffff 64bit pref]
pci 0000:00:00.0: BAR 2: assigned [mem 0x10100000-0x10103fff 64bit pref]
pci 0000:00:00.0: BAR 4: assigned [mem 0x10104000-0x10104fff 64bit pref]
futex hash table entries: 512 (order: 2, 16384 bytes)
ntfs: driver 2.1.32 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
io scheduler noop registered (default)
SCSI Media Changer driver v0.25
nand bootsel======3
zte_spifc_reg:c607df80
spifc->io_base :f0706000
nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
nand: WINBOND SPI NAND W25N01GV 128MiB 3,3V
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
NAND Chip: oobsize:0x40, pagesize:0x800, blocksize:0x20000, chipsize:0x8000000, ECC capbility is 8 bits, CRC protection is disabled
Scanning device for bad blocks
##########verinfo=U-Boot V9.0.11P10N2 20220917101007 0x1a00000 0x0 0x8f 0x83
##########u32CurrBaseAddress=1a00000,0
##########u32CurrBaseAddress=1a00000,0
kernel=kernel1,1a00000,2000000
size=1fe0000,offset=1a20000
bitflip_threshold====1,ecc strength=====1
Creating 10 MTD partitions on "ZX279127-spifc":
0x000000000000-0x000010000000 : "whole flash"
mtd: partition "whole flash" extends beyond the end of device "ZX279127-spifc" -- size truncated to 0x8000000
0x000000000000-0x000000200000 : "u-boot"
0x000000200000-0x000000600000 : "others"
0x000000600000-0x000000a00000 : "parameter tags"
0x000000a00000-0x000000e00000 : "wlan"
0x000000e00000-0x000001600000 : "usercfg"
0x000001600000-0x000001a00000 : "middleware"
0x000001a00000-0x000003a00000 : "kernel1"
0x000003a00000-0x000005a00000 : "kernel2"
0x000001a20000-0x000003a00000 : "rootfs"
ret:0
zx_spi_probe...master->bus_num:0
SPI0 probed
PPP generic driver version 2.4.2
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ZX_VA_TOP_CRM+0x4C=0x3cfff
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
I2C probe start!
zx_i2c_probe i2c-1 i2c-1->clk is c5954880 ,clk rate is 25000000
I2C probe successed!
Synopsys Designware Multimedia Card Interface Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zx tempsensor: zx_bsp_tempsensor.regs = 0xf0500034,&(zx_bsp_tempsensor.regs->cfg)= 0xf0500034
bsp_temp_start,val = 0x2f2
<pdt_temp_init>(624):creat proc files for temper sensor!!!
<pdt_temp_init>(629):temper sensor is running...
zx tempsensor: work clock 0
zx tempsensor: selector0's int num 23 allocated.
zx tempsensor: selector1's int num 24 allocated.
zx tempsensor: selector2's int num 25 allocated.
nf_conntrack version 0.5.0 (1524 buckets, 6096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Ebtables v2.0 registered
8021q: 802.1Q VLAN Support v1.8
logger: created 1024K log 'logger_main' major '99'
----------netif_flag_init_net--------!
----------wb_init_net--------!
11930:22:55 [KMLDSNP][Error] [br_mld.c(3683)mld_register] protocol =131
11930:22:55 [KMLDSNP][Error] [br_mld.c(3683)mld_register] protocol =132
11930:22:55 [KMLDSNP][Error] [br_mld.c(3683)mld_register] protocol =143
zte--oss cpu usage module init
systools version:v0.7.0
Init Common Switch Module
Init Common Switch Module Success
Init Common Gpondrv Module
Init Common Gpondrv Module Success
Registering SWP/SWPB emulation handler
VFS: Mounted root (jffs2 filesystem) readonly on device 31:9.
Freeing unused kernel memory: 212K (c0653000 - c0688000)
This architecture does not have kernel memory protection.
======================================================
mounting /dev/mtdblock3 to /tagparam, wait ...
======================================================
Pre-initialization script ...
Mounting ramdisk at /var
Mounting ramdisk at /mnt
Mounting /dev/mtdblock5 to /userconfig
jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x0037bfdc: Read 0xffffffff, calculated 0x8bb53466
jffs2: Empty flash at 0x0037c020 ends at 0x0037c800
jffs2: Empty flash at 0x0037d008 ends at 0x0037d800
Mount ok!
Mounting /dev/mtdblock6 to /usr/local/ct
Mount ok!
Configuring EMACS interfaces
Bringing up interface lo
Bringing up interface mii0
Set promisc for device mii0
Configuring with no IP address (i.e. for PPP)
verinfo=U-Boot V9.0.11P10N2 20220917101007 0x1a00000 0x0 0x8f 0x83
addr==1a00000
find backup version header!
8<�O�Kn
data_in=0x0
data_in=0x0
pon init
ZX_PA_BUF_BASE0=46b00000
ZX_VA_BUF_BASE0=c6b00000
ZX_ACL_BASE=46b20000
ZX_VA_ACL_BASE=c6b20000
ZX_FLOW_BASE=46f20000
ZX_VA_FLOW_BASE=c6f20000
ZX_BP_BUFFER_BASE=47020000
ZX_DESC_BASE=47e90000
ZX_TX_UP_DESC_BASE=47f50000
ZX_TX_DN_DESC_BASE=47f60000
ZX_VA_BPPE_BASE=c6b00000
ZX_VA_BP_BUF_BASE=c7020000
ZX_VA_DESC_BASE=c7e90000
ZX_VA_TX_UP_DESC_BASE=c7f50000
ZX_VA_TX_DN_DESC_BASE=c7f60000
BPPE_POOL_SIZE=1800
NORMAL_BP_BUFFER_SIZE=d80000
JUMBO_BP_SIZE=2800
JUMBO_BPPE_POOL_SIZE=60
BP_BUFFER_SIZE=e70000
lan_up=0, lan_up_port=0
g_pon_irq=26,f4000000,f0400000,f0500000,f0600000,c8c00000
get npp irq succeed,g_npp_irq:27
get tm irq succeed,g_tm_irq:29
get pp irq succeed,g_pp_irq:30
get idm irq succeed,g_idm_irq:28
enter ref_clk_set.. mode = 0 .
enter pll_cfg_fractional
ref_clk_set success!
rxpll_ready
serdes band cpu_temper:37 coarse:0x27
band calc fin
pon tm init
netif_napi_add() called with weight 512 on device pon
DMA_DN_DESC_CNT = 0x0
DMA_UP_DESC_CNT = 0x0
pon_tm net init ok,240/176
module-netdebug: register_chrdev failed
pon_pp init
pon_npp init
idm_status_proc success!
idm_desc_init c8ae5000/45ab8000
request idm irq succeed
idm net init ok
mac 0 link down
mac 1 link down
mac 2 link down
mac 3 link down
Init Pdt opticaldrv
8<�O�Kn
pdt_motI2CProbe_func 0x50 success!
****vendor name(B0 0x14) = ****
optical PN(0x60) = �������PT=��\����
optical PN(0x28) = 8<�O�Kn
optical PN(B0:0x60) =
Init Pdt opticaldrv Success
register fpga driver success, major=222
= TM Module SYS FS Init ended successfully =
tm_initModule begin...
enter tm_sdk_init
api lock init!!
tm_initModule end...
8<�O�Kn
Kmodule GN25L95.ko insmod successfully !
Init switch module
g_sw_cap.sw_uni_count=4
g_sw_cap.sw_uni_mask=0xf
g_sw_cap.sw_wan_port=5
g_sw_cap.sw_wan_mask=0x20
g_sw_cap.sw_all_port_count=7
g_sw_cap.sw_all_port_mask=0xef
g_sw_cap.gwtype0
g_sw_cap.wantype4
g_sw_cap.onutype2
ptSwInfo->wan_logicport=-1
g_mii_dev_name[0] sw
g_mii_dev_name[1] pon
tm_pon_protocol_pktdeal_set fail, error protocal 33
tm_pon_protocol_pktdeal_set fail, error protocal 31
protocal fail, error deal 43
tm_pon_protocol_pktdeal_set fail, error protocal 35
tm_pon_protocol_pktdeal_set fail, error protocal 36
tm_pon_protocol_pktdeal_set fail, error protocal 37
tm_pon_protocol_pktdeal_set fail, error protocal 69
tm_pon_protocol_pktdeal_set fail, error protocal 34
protocol fail, error deal 66
[TM][dpa_set_protocol_type_i_act] failed
protocol fail, error deal 65
[TM][dpa_set_protocol_type_i_act] failed
-------chip_tm_init end-----
[SW]set cpu queue rate limit to 8000pps
Capacity=256000
Capacity=256000[SW][sw_init_switch] reg hff
register npu driver 12
Init personal switch module Success
zteGpmac_initModule begin...
=== GponMac Supported MaxTcont: 16 MaxPLI: 800B ===
= PON Module Operate ended successfully =
DEbug: GPON PIN_MUX_REG3:(0x3e3f85)
DEbug: GPON GPIO_PDD_REG:(0x1fac)
DEbug: GPON GPIO_POSEDGE_REG:(0x4)
create zteGpon_rei_task ok!
= GMAC Module SYS FS Init ended successfully =
zteGpmac_initModule end...
Init Pdt Gpondrv
gpon_Init ok
11930:23:02 [KernOSS][Warn] [oss_kernel_comm(296)Kernel_ASEND] failed:net = (null), receiver = cspd.cspd.gpon_mgr, msgid = 0xe413, ptr = (null), len = 0, priority = 0, iRet=-1009
Init Pdt Gpondrv Success
insmod: can't insert '/kmodule/zte_xgmii.ko': No such file or directory
tdm registered!
zx_tdm2.0_probe!
g_tdm_buf =c8b84000,45a6e000
remap tdm reg 9a106000 to f0806000
tdm irq=36
reg 0xf0800020 value is 0x20080b
udpwatchd inited!
kudp inited!
Init codec v2.3(2019-05-17)!
P_2833: Setup 0
DSP device setup OK!
Database default setting is [current : 139]
cp: can't stat '/etc/gateinfoSCPD.xml': No such file or directory
cp: can't stat '/etc/gateconnSCPD.xml': No such file or directory
check for kasan
supportkasanstr=
not_support_kasan
check for kmemleak
11930:23:03 [KernOSS][Warn] [oss_kernel_comm(336)kern_oss_timer_] bufCnt=1: Receiver=cspd.cspd.gpon_mgr, wMsgId=0XE413
IN task: sh(618)
systools cmd: ck
console [0] enabled
create thread systools log success!ck run ok
11930:23:03 [OSS][Error] [pc.c(3077)main] Could not set affinity
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
11930:23:03 [OSS][Error] [oss_cgroup.c(180)_cgroup_init] cannot access root of cgroup,kernel may not enable the cgroup
F670L
login: 11930:23:04 [User][Error] [dbc_mgr_tbl.c(514)dbCreateDomainN] create table fail (GPONCFG) domain(Vendor_Specific) error default value
11930:23:04 [User][Error] [cspd_main.c(1115)pdt_proc_contro] portinfo.iWan: 64
11930:23:04 [User][Error] [cspd_main.c(1118)pdt_proc_contro] CSPGetCapPortInfo , PonType 64
11930:23:04 [gpon_mgr][Error] [gpon_adapter.c(236)gponCommInitAda] ====GPON ONU MODE====
11930:23:04 [dhcp4c][Warn] [dhcp4c_inst.c(4913)_dhcp4cRegSendO] Send code[60]fun[0x1e7f30] is replaced by fun[0x1ed0a8]
[log_file.c(1604)ProcLogConf] Set LOG_FILE_CONF_SET_PDTCONF.
[log_file.c(1652)ProcLogConf] Set cAutoSave = 1
IN task: sh(637)
11930:23:04 [ipisystools cmd: ck
f_mgr][Error] [ock run ok
ss_subscribe.c(527)SubScribPublish] SubScribPublish server 10002 already exist!
11930:23:04 [ipif_mgr][Error] [oss_subscribe.c(527)SubScribPublish] SubScribPublish server 10008 already exist!
11930:23:04 [DB][Warn] [dbc_mgr_tbl.c(1734)dbSetValComm] not find domain table(FFECfg) domain(Enable)
11930:23:04 [DB][Error] [dbc_mgr_tbl.c(951)dbSetDmDefault] default val error val() table(GPONCFG) domain(Vendor_Specific)
11930:23:04 [DB][Error] [dbc_mgr_tbl.c(4329)dbSetDmOriginal] default val error dbSetDmOriginal val() table(GPONCFG) domain(Vendor_Specific)
11930:23:04 [DB][Error] [dbc_def_gponcfg(234)dbDefGPONCFG] get RegisterID from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(266)dbDefGPONCFG] get Loid from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(280)dbDefGPONCFG] get LoidPwd from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(295)dbDefGPONCFG] get psk from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(44)dbSetRidHexVal] get ridFlag from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(64)dbSetRidHexVal] get HexRegisterID from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(122)dbSetPwdHexVal] get pwFlag from flash failed !
11930:23:04 [DB][Error] [dbc_def_gponcfg(143)dbSetPwdHexVal] get HexPassword from flash failed !
11930:23:04 [bsp_mgr][Error] [bsp_mgr.c(328)BspMgrInit] BspMgr INIT_SUCCESS
11930:23:04 [sntp_mgr][Error] [dbl_api.c(287)dbAPIGetView] get view failed VID(SNTP) VN(IGD) Err(-4)
11930:23:04 [sntp_mgr][Warn] [sntp_api.c(1603)sntpSetCurrentS] call dbAPIGetView failed!DBVIEW_SNTP
11930:23:04 [sntp_mgr][Error] [sntp_mgr.c(2020)sntpInit] sntpSetCurrentSyncWayToDB error!
11930:23:04 [upgrade_mgr][Error] [upgrade_mgr.c(2918)UpgradeInit] =====RegionCodeForTools=-14=====
11930:23:04 [DB][Warn] [dbc_def_dev_inf(277)dbPersonInitVer] get parameter from Flash failed!VersionMode
11930:23:04 [DB][Warn] [dbc_mgr_tbl.c(1734)dbSetValComm] not find domain table(DevInfo) domain(VersionMode)
11930:23:04 [DB][Warn] [dbc_def_dev_inf(918)dbGetParamFromV] readSoftHardWVersionCode failed
11930:23:04 [DB][Warn] [dbc_mgr_tbl.c(1734)dbSetValComm] not find domain table(DHCP4sPool) domain(Chaddr)
11930:23:04 [DB][Error] [dbc_def_lan_inf(56)GetValueFromCur] GetValueFromCurLine: CurLine is illegal!
11930:23:04 [DB][Error] [dbc_def_lan_inf(241)dbDefLANInfo] dbDefLANInfo: GetValueFromCurLine failed in 4 line!
11930:23:04 [DB][Error] [dbc_mgr_view.c(488)dbMgrCommViewAd] db view init fail(ParentControlUrl)
11930:23:04 [DB][Warn] [dbc_mgr_file_xm(1533)_dbXMLTblChk] load database failed table(AddrConf) cut or exceed max row or unequal row.
11930:23:04 [DB][Warn] [dbc_person_dev_(380)dbPersonInitHVT] get parameter from Flash failed!HardwareVerTag
11930:23:04 [DB][Warn] [dbc_person_auth(47)dbPersonInitAut] get parameter from Flash failed!Adminname
11930:23:04 [DB][Warn] [dbc_person_auth(136)dbPersonInitAut] get parameter from Flash failed!adminPassword
11930:23:04 [DB][Warn] [dbc_person_auth(99)dbPersonInitUse] get parameter from Flash failed!Username
11930:23:04 [DB][Warn] [dbc_person_auth(191)dbPersonInitPas] get parameter from Flash failed!userPassword
----------------------------------------------GetEnvPara_noproc /userconfig/env_param
11930:23:06 [DB][Warn] [dbc_core.c(577)dbPersonInitPro] Set VoIP Protocol SIP
11930:23:06 [dhcps][Warn] [interface_api.c(599)GetIFBaseIN task: sh(641)
Info] call dbAPIsystools cmd: ck
QryView failed!Ick run ok
F_ID[DEV.IP.IF1], count[0]
11930:23:06 [dhcps][Warn] [dhcpsinst.c(406)getIFInfoAndCre] Call function failed!GetWANLANBaseInfo, IF_ID[DEV.IP.IF1]
[log_file.c(1380)ProcLogConf] Set SaveEnable=0
[log_file.c(1397)ProcLogConf] Set SaveEnable=0
[log_file.c(2954)logFileProcMsg] operation result --- Success
[log_file.c(2818)logRegisterToLogcat] RegisterToLogcat success.
sip alg change power[1] ok!
ftp alg change power[1] ok!
h323 alg change power[1] ok!
rtsp alg change power[1] ok!
pptp alg change power[1] ok!
tftp alg change power[1] ok!
iptables: Bad rule (does a matching rule exist in that chain?).
11930:23:07 [OSS][Warn] [pc.c(1636)StartProgram] pName(insmod_wlan) ,startMode=0x0008,fpid=cspd.csp_wlan_config.wlan_config,Starter(wlan_config)
iptables: Bad rule (does a matching rule exist in that chain?).
ip6tables v1.4.13: Couldn't find match `rt'
Try `ip6tables -h' or 'ip6tables --help' for more information.
register mt_drv
mt_drv 0000:01:00.0: enabling device (0140 -> 0142)
=== pAd = c9562000, size = 1064776 ===
<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xf3400000, csr_addr=0xf3400000!
device_id =0x7603
RtmpChipOpsHook(507): Not support for HIF_MT yet!
mt7603_init()-->
mt_bcn_buf_init(224): Not support for HIF_MT yet!
<--mt7603_init()
iptables: Bad rule (does a matching rule exist in that chain?).
11930:23:08 [OSS][Error] [pc.c(2TX_BCN DESC c53b2c00 size = 320
382)ProgramExit]RX[0] DESC c53bb800 size = 2048
ptMsg->tSender:RX[1] DESC c53bb000 size = 2048
cspd.csp_wlan_config.wlan_config,tempNode->fatheE2pAccessMode=2
rPID:cspd.csp_wlcfg_mode=9
an_config.wlan_ccfg_mode=9
onfig
ip6tableswmode_band_equal(): Band Equal!
: Bad rule (does a matching ruleKey1Str is Invalid key length(0) or Type(0)
exist in that cKey1Str is Invalid key length(0) or Type(0)
hain?).
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
FW Version:_mt7603mp
FW Build Date:20151020155902
CmdAddressLenReq:(ret = 0)
CmdFwStartReq: override = 1, address = 1048576
CmdStartDLRsp: WiFI FW Download Success
AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
efuse_probe: efuse = 10000002
RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
RtmpEepromGetDefault::e2p_dafault=1
RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
NVM is FLASH mode, flash_offset = 0x40000
1. Phy Mode = 14
@@@ NICReadEEPROMParameters : pAd->FWLoad=0
2. Phy Mode = 14
3. Phy Mode = 14
MCS Set = ff ff 00 00 01
<==== rt28xx_init, Status=0
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f
WiFi Startup Cost (wlan0): 0.370s
net_ratelimit: 11 callbacks suppressed
11930:23:08 [OSS][Error] [oss_msg.c(662)_asynSendMsg] [cspd.log_task.log_mgr] ASEND [0xA2BF] to [multiapd.map.slave],(swLen=-1)<(Len=1212),path=/var/tmp/multiapd.map_asy,errno=[2:No such file gpio_map, invalid gpio 10
or directory] !
11930:23:08 [wlan_config][Error] [pon_wlan_adapte(7482)__rlk_wlan_ioct] [_rlk_wlan_wps_start](7315) ioctl_set wlan4 WscConfMode=0: errno 19-No such device
11930:23:08 [wlan_config][Error] [wlan_config.c(4495)handle_wlan_set] Call setup_wpsconfig fail, iRet:-1
11930:23:08 [wlan_config][Error] [wlan_config.c(4495)handle_wlan_set] Call setup_wpsconfig fail, iRet:-1
11930:23:08 [wlan_config][Error] [wlan_config.c(4495)handle_wlan_set] Call setup_wpsconfig fail, iRet:-1
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
gpio_map, invalid gpio 10
RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
RTMPDrvClose call RT28xxPciAsicRadioOff fail !!
tx_kickout_fail_count = 0
tx_timeout_fail_count = 0
rx_receive_fail_count = 0
alloc_cmd_msg = 47
free_cmd_msg = 47
11930:23:09 [OSS][Error] [oss_msg.c(662)_asynSendMsg] [cspd.log_task.log_mgr] ASEND [0xA2BF] to [multiapd.map.slave],(swLen=-1)<(Len=1212),path=/var/tmp/multiapd.map_asy,errno=[2:No such file or directory] !
iptables: Bad rule (does a matching rule exist in that chain?).
ip6tables: Bad rule (does a matching rule exist in that chain?).
11930:23:09 [OSS][Warn] gpondrvCfgXGRegInfoAdapter not support now!
[oss_sche.c(295)RunPCB] RunPCB process[fw_core_mo7_flag = 0,arg_o7_Flag->ctl=0
gr] Event[0x1103=== GponMac Supported MaxTcont: 16 MaxPLI: 800B ===
] dwUsedTicks[309]
11930:23:09 [gpon_mgr][Error] [gpon_private_ad(199)GponRegACDNotif] switchRegACDNotify Success
11930:23:09 [ipif_mgr][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.ETH.LINK1]
****vendor name(B0 0x14) = ****
optical PN(0x60) =
optical PN(0x28) = GN25L95
optical PN(B0:0x60) =
11930:23:10 [switch_mgr][Error] [switch_adapter.(855)switchDBInit] DB EthPortConfProduct is Aleady Full, Skip DBInit!
11930:23:10 [switch_mgr][Error] [switch_adapter.(855)switchDBInit] DB ETHRMON is Aleady Full, Skip DBInit!
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
Capacity=200000
Capacity=200000
Capacity=200000
Capacity=200000
ffe npu is 1
IN task: sh(937)
systools cmd: ck
ck run ok
ffe layer2_enabled:0 layer3_enabled:1
11930:23:10 [ethlinkvlan][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT1]
11930:23:10 [upgrade_remote][Error] [remote_upgrade.(1496)RemoteUpgradeIn] FirmwareUrl is illegal
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT2]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT3]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT4]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT5]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT6]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT7]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT8]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT9]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT10]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT11]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT12]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT13]
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.BRIDGING.BR1.BRPORT14]
set max age failed: Numerical result out of range
11930:23:10 [bridge][Warn] [ifs_netif.c(904)lowlayerIFChang] Call function failed!GetInterFaceBaseInfo[DEV.OPTICAL.IF1]
insmod: can't insert '/kmodule/usbcore.ko': No such file or directory
11930:23:10 [OSS][Warn] [pc.c(1636)StartProgram] pName(insmod_wlan) ,startMode=0x0008,fpid=cspd.csp_wlan_config.wlan_config,Starxhci_plat_hcd: unknown parameter 'usbmode' ignored
ter(wlan_config)xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
creating file 'devices'creating file '001'
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66c hci version 0x100 quirks 0x00010010
xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0x09100000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.25 xhci-hcd
usb usb1: SerialNumber: xhci-hcd.0.auto
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb1: csp_report_dev_addok iMsgId = a453, vid = 1d6b,pid = 2
creating file '001'
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
creating file '002'
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.25 xhci-hcd
usb usb2: SerialNumber: xhci-hcd.0.auto
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb usb2: csp_report_dev_addok iMsgId = a453, vid = 1d6b,pid = 3
mt_drv_7613 0000:00:00.0: enabling device (0140 -> 0142)
creating file '001'11930:23:11 [OSS][Error] [pc.c(2382)ProgramExit] ptMsg->tSender:cspd.csp_wlan_config.wlan_config,tempNode->fathe
rPID:cspd.csp_wl**********TOP_CRM_BASE+0x08=0x1ff7ffff******
an_config.wlan_config
dwc2 9000000.usb: 1792 invalid for host_rx_fifo_size. Check HW configuration.
dwc2 9000000.usb: 1024 invalid for host_nperio_tx_fifo_size. Check HW configuration.
dwc2 9000000.usb: 1024 invalid for max_packet_count. Check HW configuration.
dwc2 9000000.usb: DWC OTG Controller
creating file '003'
dwc2 9000000.usb: new USB bus registered, assigned bus number 3
dwc2 9000000.usb: irq 41, io mem 0x00000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: DWC OTG Controller
usb usb3: Manufacturer: Linux 4.1.25 dwc2_hsotg
usb usb3: SerialNumber: 9000000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usb usb3: csp_report_dev_addok iMsgId = a453, vid = 1d6b,pid = 2
creating file '001'
registering usb led module!
11930:23:14 [OSS][Warn] [oss_sche.c(295)RunPCB] RunPCB process[usb_mgr] Event[0x1103] dwUsedTicks[406]
insmod: can't insert '/kmodule/usbserial.ko': No such file or directory
insmod: can't insert '/kmodule/usb_wwan.ko': No such file or directory
insmod: can't insert '/kmodule/option.ko': No such file or directory
MtPwrLimitLoadParamHandle: Read Power Table Error!!
11930:23:16 [OSS][Error] [oss_msg.c(662)_asynSendMsg] [cspd.log_task.log_mgr] ASEND [0xAgpio_map, invalid gpio 10
2BF] to [multiapd.map.slave],(swLen=-1)<(Len=1212),path=/var/tmp/multiapd.map_asy,errno=[2:No such file or directory] !
11930:23:16 [OSS][Warn] [oss_sche.c(295)RunPCB] RunPCB process[CmdExtDevInfoUpdateRsp::BUG::EventExtCmdResult.u4Status = 0xc00000bb
wlan_config] Event[0xa204] dwUsedTicks[575]
11930:23:16 [wlan_config][Error] [wlan_config.c(6121)get_wlan_led_sgpio_map, invalid gpio 10
t] handle backhagpio_map, invalid gpio 10
ul bss ViewName:gpio_map, invalid gpio 10
DEV.WIFI.AP8 tCfgpio_map, invalid gpio 10
g->bEnable:0
11gpio_map, invalid gpio 10
930:23:16 [wlan_gpio_map, invalid gpio 10
config][Error] [gpio_map, invalid gpio 10
pon_wlan_adapte(gpio_map, invalid gpio 10
7482)__rlk_wlan_gpio_map, invalid gpio 10
ioct] [_rlk_wlangpio_map, invalid gpio 10
_wps_start](7315gpio_map, invalid gpio 10
) ioctl_set wlangpio_map, invalid gpio 10
0 WscConfMode=0:gpio_map, invalid gpio 10
errno 100-Netwogpio_map, invalid gpio 10
rk is down
1193gpio_map, invalid gpio 10
0:23:16 [wlan_cogpio_map, invalid gpio 10
nfig][Error] [wlan_config.c(4495)handle_wlan_set] Call setup_wpsconfig fail, iRet:-1
11930:23:16 [wlan_config][Error] [wlan_config.c(4495)handle_wlan_set] Call setup_wpsconfig fail, iRet:-1
11930:23:16 [wlan_config][Error] [wlan_config.c(5774)DBView2WlanCfgS] handle backhaul bss ViewName:DEV.WIFI.AP8 tCfg->bEnable:0
11930:23:16 [wlan_config][Error] [wlan_config.c(4495)handle_wlan_set] Call setup_wpsconfig fail, iRet:-1
insmod: can't insert '/kmodule/cdc-acm.ko': No such file or directory
11930:23:16 [OSS][Error] [oss_msg.c(662)_asynSendMsg] [cspd.log_task.log_mgr] ASEND [0xA2BF] to [multiapd.map.slave],(swLen=-1)<(Len=1212),path=/var/tmp/multiapd.map_asy,errno=[2:No such file or directory] !
insmod: can't insert '/kmodule/usbnet.ko': No such file or directory
insmod: can't insert '/kmodule/cdc_ether.ko': No such file or directory
insmod: can't insert '/kmodule/rndis_host.ko': No such file or directory
Error: argument "policydrop" is wrong: Failed to parse rule type
11930:23:16 [ddns_mgr][Warn] [ddns_mgr.c(1656)ddnsAddClientLi] call dbAPIQryView failed!DBVIEW_DDNS_SERVICE,name
11930:23:16 [ddns_mgr][Warn] [ddns_mgr.c(1569)ddnsInitClientL] Call function failed!ddnsAddClientListNode
11930:23:16 [integrate][Warn] [pdt_integrate.c(2184)IntegrateStart] Call function failed!RegisterPrefixNotify
sh: can't create proc/net/kernel_panic_diag: nonexistent directory
11930:23:16 [upgrade_mgr][Error] [upgrade_mgr.c(6381)fw_upgrade_init] PcStartProgram fw_test
11930:23:16 [factorytest][Warn] [factory_test_mg(3337)factorytestMain] **set 120 second TIMER7**
11930:23:16 [pon_dev][Error] [pon_dev_mgr.c(733)get_falsify_def] call GetTagParam failed!!!!
11930:23:16 [pon_dev][Error] [pon_dev_mgr.c(1371)FalsfyDefInitVi] call get_falsify_defend_mode failed! iRet = -7
>>>>>>>>>>>>>>>>>>>>>>>>gpon_omci start successed!<<<<<<<<<<<<<<<<<<<<<<<<<<<
11930:23:16 [OSS][Error] [oss_msg.c(605)_asynSendMsg] [fwtestprocess.fwupgrademgr.fwmgr] ASEND [0x2612] to [],wMsgLen[140],parameter invalid!
11930:23:16 [xpon_mgr][Error] [xpon_mgr.c(630)XponRegACDNotif] XponRegACDNotify Success
11930:23:16 [l2tp_mgr][Error] [l2tp_mgr.c(2047)l2tp_start_tunn] l2tp_start_tunnels: l2tp_tunnel_check failed result=-257
11930:23:16 [l2tp_mgr][Error] [l2tp_mgr.c(2096)l2tp_start_sess] l2tp_start_sessions: l2tp_session_check failed result=-257
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(77)portLocateInit] portLocateInit begin
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(108)portLocateInit] portLocateInit begin set eth and lan match info tList.dwCount:12
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)device eth0 entered promiscuous mode
portLocateInit] eth and lan match info[1]:eth0-1
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[2]:eth1-2
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLodevice eth1 entered promiscuous mode
cateInit] eth and lan match info[3]:eth2-3
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[4]:eth3-4
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[5]:wlan0-5
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan madevice eth2 entered promiscuous mode
tch info[6]:wlan1-6
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[7]:wlan2-7
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[8]:wlan3-8
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth device eth3 entered promiscuous mode
and lan match info[9]:wlan4-9
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[10]:wlan5-10
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInit] eth and lan match info[11]:wlan6-11
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(117)portLocateInitdevice wlan0 entered promiscuous mode
] eth and lan match info[12]:wlan7-12
11930:23:16 [cspd_misc][Warn] [portLocate_mgr.(128)portLocateInit] portLocateInit end ok
[log_filesave.c(527)logFileConfAction] Set SaveEnable=0
device wlan1 entered promiscuous mode
device wlan2 entered promiscuous mode
device wlan3 entered promiscuous mode
====================gpon_omci start======================
device wlan4 entered promiscuous mode
=====================omci sender process start=====================
==========================sys prodevice wlan5 entered promiscuous mode
cess start=========================
Process_Perf's Event(4352) is not support !!
Omci get Byte Order is Little-Endian
=========================omci process start=========================
IN task: sh(1083)
systools cmd: ck
ck run ok
device wlan6 entered promiscuous mode
[OADRV_VlanDefaultConfig]iRet1-257,iRet2-257
[OADRV_VlanDefaultConfig]iRet1-257,iRet2-257
11930:23:17 [omci][Warn] [interface_api.c(599)GetIFBaseInfo] call dbAPIQryView failed!IF_ID[DEV.ETH.IF5], count[0]
11930:23:17 [omci][Error] [vlan_module_cma(53)PortIDConvert] GetIFBaseInfo fail,DEV.ETH.IF5
11930:23:17 [omci][Error] [vlan_module_cma(2403)CmVlanDEFSet] PortIDConvert:!RET_CMAPI_OK FAILURE!
11930:23:17 [omci][Warn] [interface_api.c(599)GetIFBaseInfo] call dbAPIQryView failed!IF_ID[DEV.ETH.IF5], count[0]
11930:23:17 [omci][Error] [vlan_module_cma(53)PortIDConvert] GetIFBaseInfo fail,DEV.ETH.IF5
11930:23:17 [omci][Error] [vlan_module_cma(2403)CmVlanDEFSet] PortIDConvert:!RET_CMAPI_OK FAILURE!
11930:23:17 [omci][Warn] [interface_api.c(599)GetIFBaseInfo] call dbAPIQryView failed!IF_ID[DEV.ETH.IF5], count[0]
11930:23:17 [omci][Error] [vlan_module_cma(53)PortIDConvert] GetIFBaseInfo fail,DEV.ETH.IF5
11930:23:17 [device wlan7 entered promiscuous mode
omci][Error] [vlan_module_cma(2543)CmVlanUNTAGSet] PortIDConvert:!RET_CMAPI_OK FAILURE!
11930:23:17 [omci][Warn] [interface_api.c(599)GetIFBaseInfo] call dbAPIQryView failed!IF_ID[DEV.ETH.IF5], count[0]
11930:23:17 [omci][Error] [vlan_module_cma(53)PortIDConvert] GetIFBaseInfo fail,DEV.ETH.IF5
11930:23:17 [omci][Error] [vlan_module_cma(2543)CmVlanUNTAGSet] PortIDConvert:!RET_CMAPI_OK FAILURE!
Omci Debug:CmWLANListConfig.dwCount = 8
device nbif0 entered promiscuous mode
11930:23:17 [frame][Error] [hnmp_mgr.c(1105)PA_Netsphere_As] Asyn Event is not defined!
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(370)loopbackConfIni] LOW_IF_ID is invalid
11930:23:17 [diagnos_mgr][Error] [loopback_mgr.c(403)loopbackConfIni] FUNC fail:iRet:-2
[FWPM]pInstList.dwCount = 0
[FWIP]pInstList.dwCount = 0
[FWSC]pInstList.dwCount = 0
g_MeCtr_Configure=0x00000000,g_MeCtr_CreateMark1=0x00000000,g_MeCtr_CreateMark2=0x00000000
Sub_SNOntStaticDB:Don't create meclass:350!
Sub_SNOntStaticDB:Don't create meclass:336!
11930:23:17 [omci][Error] [pon_dev_cmapi.c(309)CmPonGetIspCode] 04##################call GetTagParam failed!!!!##################
call CmPonGetIspCode error! dwRet = -7
11930:23:17 [omci][Error] [pon_dev_cmapi.c(358)CmFalsifyGetPdt] ##################call Get TAG_ID_PRODUCTION_SN failed!!!!##################
call CmFalsifyGetPdtSn error!dwRet = -7
Open /proc/capability/battery fail
11930:23:17 [omci][Error] [pon_baseinfo_cm(358)cmGetUPSInfo] cmGetUPSInfo: Get upsOnline error!
Call cmGPonGetUPSInfo error, iRet = -257
11930:23:17 [omci][Error] [gpon_cmapi.c(3815)CmPonGetOmciPsk] get psk from flash failed !
Call CmPonGetPsk error,dwRet=-7
Call CmGetPrivateProfileInt error,iRet=-14,KeyName=IsOmciUpgrading
11930:23:17 [omci][Error] [pon_upgrade_cma(774)CmGetPrivatePro] CmGetPrivateProfileInt: GetPrivateProfileInt FAILURE!
OMCI_UPGRADE_GET_CFGFILE_INFO failed
power status is 0x0!!!
[LHP]Update loid_authencation state wResult 0 G_ONU_REG_Authenstates 0
[OADRV_L2_Get_Onu_Response_Time]Onu Response Time(0) out of the range!!!
[OMCI_me_ont_optical_transceiver_info_create]ZTE OMCI PROCESS :create ont_optical_transceiver_info me fail!
##Get management vlan about HG failed!##-zhangyc
====EVENT_O7_STATE_SAVE OFF====
[alecal]ZTE----pon link activate success!
IN task: sh(1120)
systools cmd: ck
ck run ok
11930:23:18 [BCC][Warn] [bcc_entry.c(271)BCC_TaskEntry] Unknown Event=0x00001100 when BCC PowerOn!
VOP_TaskEntry entered:POWER ON!!!wState:0
##O7 STATE 0##!
11930:23:18 [User][Warn] [tr069_bandsteeIN task: sh(1125)
r(593)_tr098_Bansystools cmd: ck
dstee] Bandsteeck run ok
r node has been registered !
11930:23:18 [dev][Error] [topology_dev_mg(1403)_topoDevMgrInit] SubScribPublish multiapd topo dev Service Fail!!!
11930:23:18 [acd][Warn] [acd_main.c(390)acdInit] The MESH is disable.
11930:23:18 [wlan_mgr][Warn] [pon_wlan_adapte(75random: multiapd urandom read with 93 bits of entropy available
30)__rlk_wlan_ioct] Call function failed!get wlan4 get_channel,errno 100-Network is down
11930:23:18 [wlan_mgr][Error] [pon_wlan_adapte(7531)__rlk_wlan_ioct] get wlan4 get_channel
11930:23:18 [wlan_mgr][Warn] [pon_wlan_adapte(7530)__rlk_wlan_ioct] Call function failed!get wlan4 get_tx_rate,errno 100-Network is down
11930:23:18 [wlan_mgr][Error] [pon_wlan_adapte(7531)__rlk_wlan_ioct] get wlan4 get_tx_rate
11930:23:18 [base][Warn] [ieee1905_base.c(2178)_baseStart] _baseStart g_bP1905Enable: 0
Process_Perf's Event(4355) is not support !!
ParseAlarmMsg Error!
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan0] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan1] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan2] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan3] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan4] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan5] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan6] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
11930:23:18 [topo][Error] [ieee1905_socket(94)_I5GetInterface] ioctl hwaddr fail
11930:23:18 [topo][Error] [topology_main.c(378)_topoUpdateWlan] get interface[wlan7] mac fail.
11930:23:18 [topo][Error] [topology_main.c(480)topoUpdateInter] assertion 'iRet==TOPO_OK' failed
IN task: sh(1137)
systools cmd: ck
ck run ok
GetEnvPara_noproc /userconfig/env_param
11930:23:19 [webd][Error] [webd_mesh_sysdi(255)_WebdNormalStar] _WebdNormalStartHandler start
11930:23:19 [webd][Error] [webd_mesh_sysdi(229)webMultiapVendo] webMultiapVendorTunSynRegSubNotify start
11930:23:19 [webd][Error] [webd_mesh_sysdi(246)webMultiapVendo] webMultiapVendorTunSynRegSubNotify end
11930:23:19 [webd][Error] [webd_mesh_sysdi(264)_WebdNormalStar] _WebdNormalStartHandler end
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
GetEnvPara_noproc /userconfig/env_param
11930:23:19 [tr069][Error] [dbl_api.c(287)dbAPIGetView] get view failed VID(ScheduleInform) VN(DEV.ScheduleInform1) Err(-5)
open DSP_dev driver!
ch:0 pcm mode:G711A_U
ch 0 set pcm type is ok,val is 0!
ch:1 pcm mode:G711A_U
ch 1 set pcm type is ok,val is 0!
-----VOP_TaskEntry entered:DSP START WORK!!!-------wState:1
IN task: sh(1141)
systools cmd: ck
ck run ok
Board default NO PTC
slc binding cpu1....
Board default NO PTC
Board default NO PTC
Board default NO PTC
SLC:User SLIC Driver V3.0.0 Init Finish.
port:0 potsscanen is 0
port:0 Dc:0 U:48 A:20 Ring:2 VPK:70 100msEn:0, DisPowerSave:0 impe:2 ePTC:0 dwImpe:600 rxgain(D-A):-8, txgain(A-D):0 bReverseforBatteryPolarity 0
Find a port:0 with chan 0 cs 1
cann't Find a port:1
cann't Find a port:2
cann't Find a port:3
Init port 0
Siliconlab chip Si3219x found! id:0xaa
ProSLIC:loading patch: 05042017
Si3219x: Channel 0 : VBAT Up = 59.204 v
Register the port:0.
11930:23:24 [upgrade_mgr][Error] [upgrade_mgr.c(3616)upgradeProcTime] time is 31!
11930:23:24 [upgrade_mgr][Error] [upgrade_mgr.c(3631)upgradeProcTime] tagparam file same, no need copy!
random: nonblocking pool is initialized
11930:23:36 [pon_dev][Error] [pon_dev_mgr.c(733)get_falsify_def] call GetTagParam failed!!!!
11930:23:36 [pon_dev][Error] [pon_dev_mgr.c(1337)FalsfyDefInit] call get_falsify_defend_mode failed! iRet = -7
Capacity=200000
Capacity=20000011930:25:16 [factorytest][Warn] [factory_test_mg(2980)factorytestProc] **Timer7Event:factorytest Start **
11930:25:16 [factorytest][Error] [factory_test_mg(1116)getFactoryHLTmo] call GetTagParam failed!!!
```
Assignees
Sirherobrine23 (Matheus Sampaio Queiroga)
Clear assignees
Sirherobrine23 (Matheus Sampaio Queiroga)
No Assignees
Notifications
Due Date
No due date set.
Dependencies
No dependencies set.
Reference: Sirherobrine23/OffTopics#3
Reference in New Issue
Block a user