Shakib-Molla/openwrt
1
0
Fork 0
forked from dlink-dir_819/openwrt
Code Pull Requests Activity
Files
main
openwrt/target/linux/realtek/image/rtl838x.mk
Alexandru Gagniuc ba674fea40 realtek: support EnGenius EWS2910P v3 
Add support for V3 of the Engenius EWS2910P PoE switch. Like its v1
brother, This is an RTL8380 based switch with two SFP slots, and PoE
802.3af one every RJ-45 port.

Unlike its older brother, the max budget is 55W instead of 61.6 W.
Investigation into the communication protocol with the PoE controller
is ongoing, though it appears the vendor firmware configures the PSE
with a per-port budget of 30.0W.

Specifications:
---------------
* SoC:       Realtek RTL8380M
* Flash:     32 MiB SPI flash Macronix MX25L25635E
* RAM:       256 MiB (As reported by bootloader)
* Ethernet:  8x 10/100/1000 Mbps with PoE
             2x SFP slots
* Buttons:   1 "Reset" button on front panel
             1 "LED mode: button on front panel
             1 "On/Off" Toggle switch on the back
* Power:     48V-54V DC barrel jack
* UART:      1 serial header (JP1) with populated 2.54mm pitch header
             Labeled GRTV for ground, rx, tx, and 3.3V respectively
* PoE:       1 STM ST32... microcontroller (U15)
             1 RTL8238B PSE controller
Works:
------
  - (8) RJ-45 ethernet ports
  - Switch functions
  - LEDs and buttons

Not yet enabled:
----------------
  - Power-over-Ethernet (requires realtek-poe support for RTL8232B)

Install via web interface:
-------------------------

The factory firmware will accept and flash the initramfs image. It is
recommended to flash to "Partition 0". Flashing to "Partition 1" is
not supported at this point.

The factory web GUI will show the following warning:

 " Warning: The firmware version is v0.00.00-c0.0.00
     The firmware image you are uploading is older than the current
     firmware of the switch. The device will reset back to default
     settings. Are you sure you want to proceed?"

This is expected when flashing OpenWrt. After the initramfs image
boots, flash the -sysupgrade using either the commandline or LuCI.

Install via serial console/tftp:
--------------------------------

See commit 2cfaab4549 ("realtek: add support for EnGenius EWS2910P").

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15217
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-05-31 23:19:01 +02:00

458 lines
10 KiB
Makefile
Raw Permalink Blame History

# SPDX-License-Identifier: GPL-2.0-only
include ./common.mk
define Device/allnet_all-sg8208m
SOC := rtl8382
IMAGE_SIZE := 7168k
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-SG8208M
UIMAGE_MAGIC := 0x00000006
UIMAGE_NAME := 2.2.2.0
endef
TARGET_DEVICES += allnet_all-sg8208m
define Device/apresia_aplgs120gtss
$(Device/cameo-fw)
SOC := rtl8382
IMAGE_SIZE := 14848k
DEVICE_VENDOR := APRESIA
DEVICE_MODEL := ApresiaLightGS120GT-SS
UIMAGE_MAGIC := 0x12345000
CAMEO_KERNEL_PART_SIZE := 1572864
CAMEO_KERNEL_PART := 3
CAMEO_ROOTFS_PART := 4
CAMEO_CUSTOMER_SIGNATURE := 2
CAMEO_BOARD_MODEL := APLGS120GTSS
CAMEO_BOARD_VERSION := 4
endef
TARGET_DEVICES += apresia_aplgs120gtss
define Device/d-link_dgs-1210-10mp-f
$(Device/d-link_dgs-1210)
SOC := rtl8380
DEVICE_MODEL := DGS-1210-10MP
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += d-link_dgs-1210-10mp-f
define Device/d-link_dgs-1210-10p
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-10P
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += d-link_dgs-1210-10p
define Device/d-link_dgs-1210-16
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-16
endef
TARGET_DEVICES += d-link_dgs-1210-16
define Device/d-link_dgs-1210-20
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-20
endef
TARGET_DEVICES += d-link_dgs-1210-20
define Device/d-link_dgs-1210-26
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-26
endef
TARGET_DEVICES += d-link_dgs-1210-26
define Device/d-link_dgs-1210-28
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28
endef
TARGET_DEVICES += d-link_dgs-1210-28
define Device/d-link_dgs-1210-28mp-f
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28MP
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
endef
TARGET_DEVICES += d-link_dgs-1210-28mp-f
define Device/d-link_dgs-1210-28p-f
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28P
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
endef
TARGET_DEVICES += d-link_dgs-1210-28p-f
define Device/engenius_ews2910p-v1
$(Device/engenius_ews2910p)
SOC := rtl8380
DEVICE_MODEL := EWS2910P
DEVICE_VARIANT := v1
DEVICE_PACKAGES += realtek-poe
UIMAGE_MAGIC := 0x03802910
SUPPORTED_DEVICES += engenius,ews2910p
endef
TARGET_DEVICES += engenius_ews2910p-v1
define Device/engenius_ews2910p-v3
$(Device/engenius_ews2910p)
SOC := rtl8380
DEVICE_MODEL := EWS2910P
DEVICE_VARIANT := v3
UIMAGE_MAGIC := 0x03010500
endef
TARGET_DEVICES += engenius_ews2910p-v3
define Device/hpe_1920-8g
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G (JG920A)
H3C_DEVICE_ID := 0x00010023
endef
TARGET_DEVICES += hpe_1920-8g
define Device/hpe_1920-8g-poe-65w
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G-PoE+ 65W (JG921A)
DEVICE_PACKAGES += realtek-poe
H3C_DEVICE_ID := 0x00010024
endef
TARGET_DEVICES += hpe_1920-8g-poe-65w
define Device/hpe_1920-8g-poe-180w
$(Device/hpe_1920)
$(Device/hwmon-fan-migration)
SOC := rtl8380
DEVICE_MODEL := 1920-8G-PoE+ 180W (JG922A)
DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan
H3C_DEVICE_ID := 0x00010025
SUPPORTED_DEVICES += hpe,1920-8g-poe
endef
TARGET_DEVICES += hpe_1920-8g-poe-180w
define Device/hpe_1920-16g
$(Device/hpe_1920)
SOC := rtl8382
DEVICE_MODEL := 1920-16G (JG923A)
H3C_DEVICE_ID := 0x00010026
endef
TARGET_DEVICES += hpe_1920-16g
define Device/hpe_1920-24g
$(Device/hpe_1920)
SOC := rtl8382
DEVICE_MODEL := 1920-24G (JG924A)
H3C_DEVICE_ID := 0x00010027
endef
TARGET_DEVICES += hpe_1920-24g
define Device/hpe_1920-24g-poe-180w
$(Device/hpe_1920)
$(Device/hwmon-fan-migration)
SOC := rtl8382
DEVICE_MODEL := 1920-24G-PoE+ 180W (JG925A)
DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan
H3C_DEVICE_ID := 0x00010028
endef
TARGET_DEVICES += hpe_1920-24g-poe-180w
define Device/hpe_1920-24g-poe-370w
$(Device/hpe_1920)
$(Device/hwmon-fan-migration)
SOC := rtl8382
DEVICE_MODEL := 1920-24G-PoE+ 370W (JG926A)
DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan
H3C_DEVICE_ID := 0x00010029
endef
TARGET_DEVICES += hpe_1920-24g-poe-370w
define Device/inaba_aml2-17gp
SOC := rtl8382
IMAGE_SIZE := 13504k
DEVICE_VENDOR := INABA
DEVICE_MODEL := Abaniact AML2-17GP
UIMAGE_MAGIC := 0x83800000
endef
TARGET_DEVICES += inaba_aml2-17gp
define Device/iodata_bsh-g24mb
SOC := rtl8382
IMAGE_SIZE := 13696k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := BSH-G24MB
UIMAGE_MAGIC := 0x83800013
endef
TARGET_DEVICES += iodata_bsh-g24mb
define Device/linksys_lgs310c
SOC := rtl8380
IMAGE_SIZE := 13504k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := LGS310C
BELKIN_MODEL := BKS-RTL83xx
BELKIN_HEADER := 0x07800001
LINKSYS_MODEL := 60402060
IMAGES += factory.imag
IMAGE/factory.imag := \
append-kernel | \
pad-to 64k | \
append-rootfs | \
pad-rootfs | \
check-size | \
append-metadata | \
linksys-image | \
belkin-header
endef
TARGET_DEVICES += linksys_lgs310c
# "NGE" refers to the uImage magic
define Device/netgear_nge
KERNEL := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
SOC := rtl8380
IMAGE_SIZE := 14848k
UIMAGE_MAGIC := 0x4e474520
UIMAGE_NAME := 9.9.9.9
DEVICE_VENDOR := NETGEAR
endef
# "NGG" refers to the uImage magic
define Device/netgear_ngg
KERNEL := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
SOC := rtl8380
IMAGE_SIZE := 14848k
UIMAGE_MAGIC := 0x4e474720
DEVICE_VENDOR := NETGEAR
endef
define Device/netgear_gs108t-v3
$(Device/netgear_nge)
DEVICE_MODEL := GS108T
DEVICE_VARIANT := v3
endef
TARGET_DEVICES += netgear_gs108t-v3
define Device/netgear_gs110tpp-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS110TPP
DEVICE_VARIANT := v1
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += netgear_gs110tpp-v1
define Device/netgear_gs110tup-v1
$(Device/netgear_ngg)
DEVICE_MODEL := GS110TUP
DEVICE_VARIANT := v1
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += netgear_gs110tup-v1
define Device/netgear_gs308t-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS308T
DEVICE_VARIANT := v1
UIMAGE_MAGIC := 0x4e474335
endef
TARGET_DEVICES += netgear_gs308t-v1
define Device/netgear_gs310tp-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS310TP
DEVICE_VARIANT := v1
UIMAGE_MAGIC := 0x4e474335
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += netgear_gs310tp-v1
define Device/panasonic_m16eg-pn28160k
SOC := rtl8382
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M16eG
DEVICE_VARIANT := PN28160K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m16eg-pn28160k
define Device/panasonic_m24eg-pn28240k
SOC := rtl8382
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M24eG
DEVICE_VARIANT := PN28240K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m24eg-pn28240k
define Device/panasonic_m8eg-pn28080k
SOC := rtl8380
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M8eG
DEVICE_VARIANT := PN28080K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m8eg-pn28080k
define Device/tplink_sg2008p-v1
SOC := rtl8380
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := SG2008P
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-hwmon-tps23861
endef
TARGET_DEVICES += tplink_sg2008p-v1
define Device/tplink_sg2210p-v3
SOC := rtl8380
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := SG2210P
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-hwmon-tps23861
endef
TARGET_DEVICES += tplink_sg2210p-v3
define Device/tplink_t1600g-28ts-v3
SOC := rtl8382
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := T1600G-28TS
DEVICE_VARIANT := v3
endef
TARGET_DEVICES += tplink_t1600g-28ts-v3
define Device/zyxel_gs1900-10hp
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-10HP
ZYXEL_VERS := AAZI
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-10hp
define Device/zyxel_gs1900-16
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-16
ZYXEL_VERS := AAHJ
endef
TARGET_DEVICES += zyxel_gs1900-16
define Device/zyxel_gs1900-8-v1
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHH
SUPPORTED_DEVICES += zyxel,gs1900-8
endef
TARGET_DEVICES += zyxel_gs1900-8-v1
define Device/zyxel_gs1900-8-v2
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8
DEVICE_VARIANT := v2
ZYXEL_VERS := AAHH
SUPPORTED_DEVICES += zyxel,gs1900-8
endef
TARGET_DEVICES += zyxel_gs1900-8-v2
define Device/zyxel_gs1900-8hp-v1
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8HP
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHI
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-8hp-v1
define Device/zyxel_gs1900-8hp-v2
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8HP
DEVICE_VARIANT := v2
ZYXEL_VERS := AAHI
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-8hp-v2
define Device/zyxel_gs1900-24-v1
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHL
endef
TARGET_DEVICES += zyxel_gs1900-24-v1
define Device/zyxel_gs1900-24e
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24E
ZYXEL_VERS := AAHK
endef
TARGET_DEVICES += zyxel_gs1900-24e
define Device/zyxel_gs1900-24ep
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24EP
ZYXEL_VERS := ABTO
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-24ep
define Device/zyxel_gs1900-24hp-v1
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24HP
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHM
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-24hp-v1
define Device/zyxel_gs1900-24hp-v2
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24HP
DEVICE_VARIANT := v2
ZYXEL_VERS := ABTP
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-24hp-v2
View Git Blame Copy Permalink