Shakib-Molla/openwrt
1
0
Fork 0
forked from dlink-dir_819/openwrt
Code Pull Requests Activity
Files
main
openwrt/package/boot/uboot-d1/patches/0050-gpio-axp-Select-variant-from-compatible-at-runtime.patch
Zoltan HERPAI d41d9befb9 uboot-d1: add bootloader for upcoming d1 target 
Add u-boot bootloader based on 2023.01 to support D1-based boards, currently:

 - Dongshan Nezha STU
 - LicheePi RV Dock
 - MangoPi MQ-Pro
 - Nezha D1

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2024-02-29 16:50:20 +01:00

376 lines
11 KiB
Diff
Raw Permalink Blame History

From 697eb56ed8c9b3814ddbd87ae0c6e749ccafc9e3 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 28 Aug 2021 00:27:19 -0500
Subject: [PATCH 50/90] gpio: axp: Select variant from compatible at runtime
There are three major variants of the AXP PMIC GPIO functionality (plus
PMICs with no GPIOs at all). Except for GPIO3 on the AXP209, which uses
a different register layout, it is straightforward to support all three
variants with a single driver. Do this, and in the process remove the
GPIO-related definitions from the PMIC-specific headers, and therefore
the dependency on AXP_PMIC_BUS.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/gpio/Kconfig | 1 -
drivers/gpio/axp_gpio.c | 137 +++++++++++++++++++++-------------------
drivers/power/axp209.c | 6 +-
drivers/power/axp221.c | 4 +-
include/axp152.h | 10 ---
include/axp209.h | 16 ++---
include/axp221.h | 13 ++--
include/axp809.h | 8 ---
include/axp818.h | 8 ---
9 files changed, 89 insertions(+), 114 deletions(-)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -107,7 +107,6 @@ config ALTERA_PIO
config AXP_GPIO
bool "X-Powers AXP PMICs GPIO driver"
depends on DM_GPIO && PMIC_AXP
- depends on AXP_PMIC_BUS
help
This driver supports the GPIO pins on
X-Powers AXP152, AXP2xx, and AXP8xx PMICs.
--- a/drivers/gpio/axp_gpio.c
+++ b/drivers/gpio/axp_gpio.c
@@ -7,110 +7,117 @@
#include <common.h>
#include <asm/gpio.h>
-#include <axp_pmic.h>
#include <dm.h>
+#include <dm/device-internal.h>
#include <errno.h>
#include <power/pmic.h>
#define AXP_GPIO_PREFIX "AXP0-"
#define AXP_GPIO_COUNT 4
-static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
-
-static u8 axp_get_gpio_ctrl_reg(unsigned pin)
-{
- switch (pin) {
- case 0: return AXP_GPIO0_CTRL;
- case 1: return AXP_GPIO1_CTRL;
-#ifdef AXP_GPIO2_CTRL
- case 2: return AXP_GPIO2_CTRL;
-#endif
-#ifdef AXP_GPIO3_CTRL
- case 3: return AXP_GPIO3_CTRL;
-#endif
- }
- return 0;
-}
-
-static int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
-{
- u8 reg;
-
- reg = axp_get_gpio_ctrl_reg(pin);
- if (reg == 0)
- return -EINVAL;
-
- return pmic_reg_write(dev->parent, reg, AXP_GPIO_CTRL_INPUT);
-}
-
-static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
- int val)
-{
- u8 reg;
-
- reg = axp_get_gpio_ctrl_reg(pin);
- if (reg == 0)
- return -EINVAL;
-
- return pmic_reg_write(dev->parent, reg,
- val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
- AXP_GPIO_CTRL_OUTPUT_LOW);
-}
+#define AXP_GPIO_CTRL_MASK 0x7
+#define AXP_GPIO_CTRL_OUTPUT_LOW 0
+#define AXP_GPIO_CTRL_OUTPUT_HIGH 1
+
+struct axp_gpio_desc {
+ const u8 *pins;
+ u8 npins;
+ u8 status_reg;
+ u8 status_offset;
+ u8 input_mux;
+};
static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
{
- u8 reg, mask;
+ const struct axp_gpio_desc *desc = dev_get_priv(dev);
int ret;
- reg = axp_get_gpio_ctrl_reg(pin);
- if (reg == 0)
- return -EINVAL;
-
- ret = pmic_reg_read(dev->parent, AXP_GPIO_STATE);
+ ret = pmic_reg_read(dev->parent, desc->status_reg);
if (ret < 0)
return ret;
- mask = 1 << (pin + AXP_GPIO_STATE_OFFSET);
-
- return (ret & mask) ? 1 : 0;
+ return !!(ret & BIT(desc->status_offset + pin));
}
-static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
+static int axp_gpio_set_flags(struct udevice *dev, unsigned pin, ulong flags)
{
- u8 reg;
+ const struct axp_gpio_desc *desc = dev_get_priv(dev);
+ u8 mux;
- reg = axp_get_gpio_ctrl_reg(pin);
- if (reg == 0)
+ if (flags & (GPIOD_MASK_DSTYPE | GPIOD_MASK_PULL))
return -EINVAL;
- return pmic_reg_write(dev->parent, reg,
- val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
- AXP_GPIO_CTRL_OUTPUT_LOW);
+ if (flags & GPIOD_IS_IN)
+ mux = desc->input_mux;
+ else if (flags & GPIOD_IS_OUT_ACTIVE)
+ mux = AXP_GPIO_CTRL_OUTPUT_HIGH;
+ else
+ mux = AXP_GPIO_CTRL_OUTPUT_LOW;
+
+ return pmic_clrsetbits(dev->parent, desc->pins[pin],
+ AXP_GPIO_CTRL_MASK, mux);
}
static const struct dm_gpio_ops axp_gpio_ops = {
- .direction_input = axp_gpio_direction_input,
- .direction_output = axp_gpio_direction_output,
.get_value = axp_gpio_get_value,
- .set_value = axp_gpio_set_value,
+ .xlate = gpio_xlate_offs_flags,
+ .set_flags = axp_gpio_set_flags,
};
static int axp_gpio_probe(struct udevice *dev)
{
+ struct axp_gpio_desc *desc = (void *)dev_get_driver_data(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ dev_set_priv(dev, desc);
+
/* Tell the uclass how many GPIOs we have */
uc_priv->bank_name = AXP_GPIO_PREFIX;
- uc_priv->gpio_count = AXP_GPIO_COUNT;
+ uc_priv->gpio_count = desc->npins;
return 0;
}
+static const u8 axp152_gpio_pins[] = {
+ 0x90, 0x91, 0x92, 0x93,
+};
+
+static const struct axp_gpio_desc axp152_gpio_desc = {
+ .pins = axp152_gpio_pins,
+ .npins = ARRAY_SIZE(axp152_gpio_pins),
+ .status_reg = 0x97,
+ .status_offset = 4,
+ .input_mux = 3,
+};
+
+static const u8 axp209_gpio_pins[] = {
+ 0x90, 0x92, 0x93,
+};
+
+static const struct axp_gpio_desc axp209_gpio_desc = {
+ .pins = axp209_gpio_pins,
+ .npins = ARRAY_SIZE(axp209_gpio_pins),
+ .status_reg = 0x94,
+ .status_offset = 4,
+ .input_mux = 2,
+};
+
+static const u8 axp221_gpio_pins[] = {
+ 0x90, 0x92,
+};
+
+static const struct axp_gpio_desc axp221_gpio_desc = {
+ .pins = axp221_gpio_pins,
+ .npins = ARRAY_SIZE(axp221_gpio_pins),
+ .status_reg = 0x94,
+ .input_mux = 2,
+};
+
static const struct udevice_id axp_gpio_ids[] = {
- { .compatible = "x-powers,axp152-gpio" },
- { .compatible = "x-powers,axp209-gpio" },
- { .compatible = "x-powers,axp221-gpio" },
- { .compatible = "x-powers,axp813-gpio" },
+ { .compatible = "x-powers,axp152-gpio", .data = (ulong)&axp152_gpio_desc },
+ { .compatible = "x-powers,axp209-gpio", .data = (ulong)&axp209_gpio_desc },
+ { .compatible = "x-powers,axp221-gpio", .data = (ulong)&axp221_gpio_desc },
+ { .compatible = "x-powers,axp813-gpio", .data = (ulong)&axp221_gpio_desc },
{ }
};
--- a/drivers/power/axp209.c
+++ b/drivers/power/axp209.c
@@ -215,15 +215,15 @@ int axp_init(void)
* Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
* from android these are sometimes on.
*/
- rc = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
+ rc = pmic_bus_write(AXP209_GPIO0_CTRL, AXP209_GPIO_CTRL_INPUT);
if (rc)
return rc;
- rc = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
+ rc = pmic_bus_write(AXP209_GPIO1_CTRL, AXP209_GPIO_CTRL_INPUT);
if (rc)
return rc;
- rc = pmic_bus_write(AXP_GPIO2_CTRL, AXP_GPIO_CTRL_INPUT);
+ rc = pmic_bus_write(AXP209_GPIO2_CTRL, AXP209_GPIO_CTRL_INPUT);
if (rc)
return rc;
--- a/drivers/power/axp221.c
+++ b/drivers/power/axp221.c
@@ -226,11 +226,11 @@ int axp_init(void)
* Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
* from android these are sometimes on.
*/
- ret = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
+ ret = pmic_bus_write(AXP221_GPIO0_CTRL, AXP221_GPIO_CTRL_INPUT);
if (ret)
return ret;
- ret = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
+ ret = pmic_bus_write(AXP221_GPIO1_CTRL, AXP221_GPIO_CTRL_INPUT);
if (ret)
return ret;
--- a/include/axp152.h
+++ b/include/axp152.h
@@ -14,17 +14,7 @@ enum axp152_reg {
#define AXP152_POWEROFF (1 << 7)
-/* For axp_gpio.c */
#ifdef CONFIG_AXP152_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
-#define AXP_GPIO0_CTRL 0x90
-#define AXP_GPIO1_CTRL 0x91
-#define AXP_GPIO2_CTRL 0x92
-#define AXP_GPIO3_CTRL 0x93
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
-#define AXP_GPIO_STATE 0x97
-#define AXP_GPIO_STATE_OFFSET 0
#endif
--- a/include/axp209.h
+++ b/include/axp209.h
@@ -21,6 +21,9 @@ enum axp209_reg {
AXP209_IRQ_ENABLE5 = 0x44,
AXP209_IRQ_STATUS5 = 0x4c,
AXP209_SHUTDOWN = 0x32,
+ AXP209_GPIO0_CTRL = 0x90,
+ AXP209_GPIO1_CTRL = 0x92,
+ AXP209_GPIO2_CTRL = 0x93,
};
#define AXP209_POWER_STATUS_ON_BY_DC BIT(0)
@@ -73,16 +76,11 @@ enum axp209_reg {
#define AXP209_POWEROFF BIT(7)
-/* For axp_gpio.c */
+#define AXP209_GPIO_CTRL_OUTPUT_LOW 0x00
+#define AXP209_GPIO_CTRL_OUTPUT_HIGH 0x01
+#define AXP209_GPIO_CTRL_INPUT 0x02
+
#ifdef CONFIG_AXP209_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
-#define AXP_GPIO0_CTRL 0x90
-#define AXP_GPIO1_CTRL 0x92
-#define AXP_GPIO2_CTRL 0x93
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
-#define AXP_GPIO_STATE 0x94
-#define AXP_GPIO_STATE_OFFSET 4
#endif
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -44,20 +44,17 @@
#define AXP221_ALDO3_CTRL 0x2a
#define AXP221_SHUTDOWN 0x32
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
+#define AXP221_GPIO0_CTRL 0x90
+#define AXP221_GPIO1_CTRL 0x92
+#define AXP221_GPIO_CTRL_OUTPUT_LOW 0x00
+#define AXP221_GPIO_CTRL_OUTPUT_HIGH 0x01
+#define AXP221_GPIO_CTRL_INPUT 0x02
#define AXP221_PAGE 0xff
/* Page 1 addresses */
#define AXP221_SID 0x20
-/* For axp_gpio.c */
#ifdef CONFIG_AXP221_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
-#define AXP_GPIO0_CTRL 0x90
-#define AXP_GPIO1_CTRL 0x92
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
-#define AXP_GPIO_STATE 0x94
-#define AXP_GPIO_STATE_OFFSET 0
#endif
--- a/include/axp809.h
+++ b/include/axp809.h
@@ -43,15 +43,7 @@
#define AXP809_SHUTDOWN 0x32
#define AXP809_SHUTDOWN_POWEROFF (1 << 7)
-/* For axp_gpio.c */
#ifdef CONFIG_AXP809_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
-#define AXP_GPIO0_CTRL 0x90
-#define AXP_GPIO1_CTRL 0x92
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
-#define AXP_GPIO_STATE 0x94
-#define AXP_GPIO_STATE_OFFSET 0
#endif
--- a/include/axp818.h
+++ b/include/axp818.h
@@ -57,15 +57,7 @@
#define AXP818_SHUTDOWN 0x32
#define AXP818_SHUTDOWN_POWEROFF (1 << 7)
-/* For axp_gpio.c */
#ifdef CONFIG_AXP818_POWER
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
-#define AXP_GPIO0_CTRL 0x90
-#define AXP_GPIO1_CTRL 0x92
-#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
-#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
-#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
-#define AXP_GPIO_STATE 0x94
-#define AXP_GPIO_STATE_OFFSET 0
#endif
View Git Blame Copy Permalink