20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
98 lines
2.3 KiB
YAML
98 lines
2.3 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Maxim 17040 fuel gauge series
|
|
|
|
maintainers:
|
|
- Sebastian Reichel <sre@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: power-supply.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- maxim,max17040
|
|
- maxim,max17041
|
|
- maxim,max17043
|
|
- maxim,max17044
|
|
- maxim,max17048
|
|
- maxim,max17049
|
|
- maxim,max17058
|
|
- maxim,max17059
|
|
- maxim,max77836-battery
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
maxim,alert-low-soc-level:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 32
|
|
description: |
|
|
The alert threshold that sets the state of charge level (%) where an interrupt is generated.
|
|
If skipped the power up default value of 4 (%) will be used.
|
|
|
|
maxim,double-soc:
|
|
type: boolean
|
|
description: |
|
|
Certain devices return double the capacity.
|
|
Specify this to divide the reported value in 2 and thus normalize it.
|
|
SoC == State of Charge == Capacity.
|
|
|
|
maxim,rcomp:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
minItems: 1
|
|
maxItems: 2
|
|
description: |
|
|
A value to compensate readings for various battery chemistries and operating temperatures.
|
|
max17040,41 have 2 byte rcomp, default to 0x97 0x00.
|
|
All other devices have one byte rcomp, default to 0x97.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
wakeup-source:
|
|
type: boolean
|
|
description: |
|
|
Use this property to use alert low SoC level interrupt as wake up source.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
battery@36 {
|
|
compatible = "maxim,max17048";
|
|
reg = <0x36>;
|
|
maxim,rcomp = /bits/ 8 <0x56>;
|
|
maxim,alert-low-soc-level = <10>;
|
|
maxim,double-soc;
|
|
};
|
|
};
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
battery@36 {
|
|
compatible = "maxim,max77836-battery";
|
|
reg = <0x36>;
|
|
maxim,alert-low-soc-level = <10>;
|
|
interrupt-parent = <&gpio7>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|