1
0
This repository has been archived on 2024-07-22. You can view files and clone it, but cannot push or open issues or pull requests.
svn-openwrt-archive/target/linux/ramips/dts/CS-QR10.dts
Luka Perkov 617250d8b3 ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

SVN-Revision: 49357
2016-05-10 22:37:24 +00:00

164 lines
2.4 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex CS-QR10";
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
i2c@900 {
status = "okay";
};
i2s: i2s@a00 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pcm_i2s_pins>;
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
pcm@2000 {
status = "okay";
};
gdma@2800 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi refclk", "rgmii1";
ralink,function = "gpio";
};
wdt {
ralink,group = "wdt";
ralink,function = "wdt refclk";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
};
sdhci@10130000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pcie@10140000 {
status = "okay";
};
sound {
compatible = "mediatek,mt7620-audio-wm8960";
model = "mt7620-wm8960";
i2s-controller = <&i2s>;
audio-routing =
"Ext Spk", "SPK_LP",
"Ext Spk", "SPK_LN",
"Ext Spk", "SPK_RP",
"Ext Spk", "SPK_RN";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "cs-qr10:red:power";
gpios = <&gpio1 4 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "reset";
gpios = <&gpio1 1 1>;
linux,code = <0x198>;
};
s2 {
label = "wps";
gpios = <&gpio1 3 1>;
linux,code = <0x211>;
};
};
};