Openwrt/svn-openwrt-archive
Archived
1
0
Fork 0
Code
This repository has been archived on 2024-07-22. You can view files and clone it, but cannot push or open issues or pull requests.
master
svn-openwrt-archive/package/boot/uboot-lantiq/patches/0014-MIPS-add-support-for-Lantiq-XWAY-SoCs.patch
John Crispin 03a777c293 Refresh patches 
Refresh uboot-lantiq patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40546
2014-04-22 08:08:19 +00:00

9340 lines
236 KiB
Diff
Raw Permalink Blame History

From 11553b0de8992ded6240d034bd49f561d17bea53 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Thu, 13 Jun 2013 01:18:02 +0200
Subject: MIPS: add support for Lantiq XWAY SoCs
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
--- a/.gitignore
+++ b/.gitignore
@@ -49,6 +49,13 @@
/u-boot.sb
/u-boot.bd
/u-boot.geany
+/u-boot.bin.lzma
+/u-boot.bin.lzo
+/u-boot.ltq.lzma.norspl
+/u-boot.ltq.lzo.norspl
+/u-boot.ltq.norspl
+/u-boot.lzma.img
+/u-boot.lzo.img
#
# Generated files
--- a/Makefile
+++ b/Makefile
@@ -435,6 +435,12 @@ $(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(BOARD_SIZE_CHECK)
+$(obj)u-boot.bin.lzma: $(obj)u-boot.bin
+ cat $< | lzma -9 -f - > $@
+
+$(obj)u-boot.bin.lzo: $(obj)u-boot.bin
+ cat $< | lzop -9 -f - > $@
+
$(obj)u-boot.ldr: $(obj)u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
@@ -454,13 +460,23 @@ ifndef CONFIG_SYS_UBOOT_START
CONFIG_SYS_UBOOT_START := 0
endif
-$(obj)u-boot.img: $(obj)u-boot.bin
- $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
+define GEN_UBOOT_IMAGE
+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C $(1) \
-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
-e $(CONFIG_SYS_UBOOT_START) \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
+endef
+
+$(obj)u-boot.img: $(obj)u-boot.bin
+ $(call GEN_UBOOT_IMAGE,none)
+
+$(obj)u-boot.lzma.img: $(obj)u-boot.bin.lzma
+ $(call GEN_UBOOT_IMAGE,lzma)
+
+$(obj)u-boot.lzo.img: $(obj)u-boot.bin.lzo
+ $(call GEN_UBOOT_IMAGE,lzo)
$(obj)u-boot.imx: $(obj)u-boot.bin depend
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
@@ -571,6 +587,27 @@ $(obj)u-boot-img-spl-at-end.bin: $(obj)s
conv=notrunc 2>/dev/null
cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+$(obj)u-boot.ltq.sfspl: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
+ $(obj)tools/ltq-boot-image -t sfspl -e $(CONFIG_SPL_TEXT_BASE) \
+ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
+
+$(obj)u-boot.ltq.lzo.sfspl: $(obj)u-boot.lzo.img $(obj)spl/u-boot-spl.bin
+ $(obj)tools/ltq-boot-image -t sfspl -e $(CONFIG_SPL_TEXT_BASE) \
+ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
+
+$(obj)u-boot.ltq.lzma.sfspl: $(obj)u-boot.lzma.img $(obj)spl/u-boot-spl.bin
+ $(obj)tools/ltq-boot-image -t sfspl -e $(CONFIG_SPL_TEXT_BASE) \
+ -s $(obj)spl/u-boot-spl.bin -u $< -o $@
+
+$(obj)u-boot.ltq.norspl: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
+ cat $(obj)spl/u-boot-spl.bin $< > $@
+
+$(obj)u-boot.ltq.lzo.norspl: $(obj)u-boot.lzo.img $(obj)spl/u-boot-spl.bin
+ cat $(obj)spl/u-boot-spl.bin $< > $@
+
+$(obj)u-boot.ltq.lzma.norspl: $(obj)u-boot.lzma.img $(obj)spl/u-boot-spl.bin
+ cat $(obj)spl/u-boot-spl.bin $< > $@
+
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
--- a/README
+++ b/README
@@ -468,6 +468,11 @@ The following options need to be configu
CONF_CM_CACHABLE_CUW
CONF_CM_CACHABLE_ACCELERATED
+ CONFIG_SYS_MIPS_CACHE_EXT_INIT
+
+ Enable this to use extended cache initialization for recent
+ MIPS CPU cores.
+
CONFIG_SYS_XWAY_EBU_BOOTCFG
Special option for Lantiq XWAY SoCs for booting from NOR flash.
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
@@ -45,9 +45,13 @@ PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__M
# On the other hand, we want PIC in the U-Boot code to relocate it from ROM
# to RAM. $28 is always used as gp.
#
-PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic $(ENDIANNESS)
+PF_ABICALLS ?= -mabicalls
+PF_PIC ?= -fpic
+PF_PIE ?= -pie
+
+PLATFORM_CPPFLAGS += -G 0 $(PF_ABICALLS) $(PF_PIC) $(ENDIANNESS)
PLATFORM_CPPFLAGS += -msoft-float
PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib $(ENDIANNESS)
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-LDFLAGS_FINAL += --gc-sections -pie
+LDFLAGS_FINAL += --gc-sections $(PF_PIE)
OBJCFLAGS += --remove-section=.dynsym
--- a/arch/mips/cpu/mips32/cache.S
+++ b/arch/mips/cpu/mips32/cache.S
@@ -29,7 +29,11 @@
*/
#define MIPS_MAX_CACHE_SIZE 0x10000
+#ifdef CONFIG_SYS_MIPS_CACHE_EXT_INIT
+#define INDEX_BASE 0x9fc00000
+#else
#define INDEX_BASE CKSEG0
+#endif
.macro cache_op op addr
.set push
@@ -65,7 +69,11 @@
*/
LEAF(mips_init_icache)
blez a1, 9f
+#ifdef CONFIG_SYS_MIPS_CACHE_EXT_INIT
+ mtc0 zero, CP0_ITAGLO
+#else
mtc0 zero, CP0_TAGLO
+#endif
/* clear tag to invalidate */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
@@ -90,7 +98,11 @@ LEAF(mips_init_icache)
*/
LEAF(mips_init_dcache)
blez a1, 9f
+#ifdef CONFIG_SYS_MIPS_CACHE_EXT_INIT
+ mtc0 zero, CP0_DTAGLO
+#else
mtc0 zero, CP0_TAGLO
+#endif
/* clear all tags */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/Makefile
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS-y += cgu.o chipid.o ebu.o mem.o pmu.o rcu.o
+SOBJS-y += cgu_init.o mem_init.o
+
+COBJS := $(COBJS-y)
+SOBJS := $(SOBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/cgu.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/clk.h>
+#include <asm/lantiq/io.h>
+
+#define LTQ_CGU_SYS_DDR_MASK 0x0003
+#define LTQ_CGU_SYS_DDR_SHIFT 0
+#define LTQ_CGU_SYS_CPU0_MASK 0x000C
+#define LTQ_CGU_SYS_CPU0_SHIFT 2
+#define LTQ_CGU_SYS_FPI_MASK 0x0040
+#define LTQ_CGU_SYS_FPI_SHIFT 6
+
+struct ltq_cgu_regs {
+ u32 rsvd0;
+ u32 pll0_cfg; /* PLL0 config */
+ u32 pll1_cfg; /* PLL1 config */
+ u32 pll2_cfg; /* PLL2 config */
+ u32 sys; /* System clock */
+ u32 update; /* CGU update control */
+ u32 if_clk; /* Interface clock */
+ u32 osc_con; /* Update OSC Control */
+ u32 smd; /* SDRAM Memory Control */
+ u32 rsvd1[3];
+ u32 pcm_cr; /* PCM control */
+ u32 pci_cr; /* PCI clock control */
+};
+
+static struct ltq_cgu_regs *ltq_cgu_regs =
+ (struct ltq_cgu_regs *) CKSEG1ADDR(LTQ_CGU_BASE);
+
+static inline u32 ltq_cgu_sys_readl(u32 mask, u32 shift)
+{
+ return (ltq_readl(&ltq_cgu_regs->sys) & mask) >> shift;
+}
+
+unsigned long ltq_get_io_region_clock(void)
+{
+ u32 ddr_sel;
+ unsigned long clk;
+
+ ddr_sel = ltq_cgu_sys_readl(LTQ_CGU_SYS_DDR_MASK,
+ LTQ_CGU_SYS_DDR_SHIFT);
+
+ switch (ddr_sel) {
+ case 0:
+ clk = CLOCK_166_MHZ;
+ break;
+ case 1:
+ clk = CLOCK_133_MHZ;
+ break;
+ case 2:
+ clk = CLOCK_111_MHZ;
+ break;
+ case 3:
+ clk = CLOCK_83_MHZ;
+ break;
+ default:
+ clk = 0;
+ break;
+ }
+
+ return clk;
+}
+
+unsigned long ltq_get_cpu_clock(void)
+{
+ u32 cpu0_sel;
+ unsigned long clk;
+
+ cpu0_sel = ltq_cgu_sys_readl(LTQ_CGU_SYS_CPU0_MASK,
+ LTQ_CGU_SYS_CPU0_SHIFT);
+
+ switch (cpu0_sel) {
+ /* Same as PLL0 output (333,33 MHz) */
+ case 0:
+ clk = CLOCK_333_MHZ;
+ break;
+ /* 1/1 fixed ratio to DDR clock */
+ case 1:
+ clk = ltq_get_io_region_clock();
+ break;
+ /* 1/2 fixed ratio to DDR clock */
+ case 2:
+ clk = ltq_get_io_region_clock() << 1;
+ break;
+ default:
+ clk = 0;
+ break;
+ }
+
+ return clk;
+}
+
+unsigned long ltq_get_bus_clock(void)
+{
+ u32 fpi_sel;
+ unsigned long clk;
+
+ fpi_sel = ltq_cgu_sys_readl(LTQ_CGU_SYS_FPI_MASK,
+ LTQ_CGU_SYS_FPI_SHIFT);
+
+ if (fpi_sel)
+ /* Half the DDR clock */
+ clk = ltq_get_io_region_clock() >> 1;
+ else
+ /* Same as DDR clock */
+ clk = ltq_get_io_region_clock();
+
+ return clk;
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/cgu_init.S
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/addrspace.h>
+#include <asm/arch/soc.h>
+
+/* RCU module register */
+#define LTQ_RCU_RST_REQ 0x0010
+#define LTQ_RCU_RST_STAT 0x0014
+#define LTQ_RCU_RST_REQ_VALUE 0x40000008
+#define LTQ_RCU_RST_STAT_XTAL_F 0x20000
+
+/* CGU module register */
+#define LTQ_CGU_PLL0_CFG 0x0004 /* PLL0 config */
+#define LTQ_CGU_PLL1_CFG 0x0008 /* PLL1 config */
+#define LTQ_CGU_PLL2_CFG 0x000C /* PLL2 config */
+#define LTQ_CGU_SYS 0x0010 /* System clock */
+
+/* Valid SYS.CPU0/1 values */
+#define LTQ_CGU_SYS_CPU0_SHIFT 2
+#define LTQ_CGU_SYS_CPU1_SHIFT 4
+#define LTQ_CGU_SYS_CPU_PLL0 0x0
+#define LTQ_CGU_SYS_CPU_DDR_EQUAL 0x1
+#define LTQ_CGU_SYS_CPU_DDR_TWICE 0x2
+
+/* Valid SYS.DDR values */
+#define LTQ_CGU_SYS_DDR_SHIFT 0
+#define LTQ_CGU_SYS_DDR_167_MHZ 0x0
+#define LTQ_CGU_SYS_DDR_133_MHZ 0x1
+#define LTQ_CGU_SYS_DDR_111_MHZ 0x2
+#define LTQ_CGU_SYS_DDR_83_MHZ 0x3
+
+/* Valid SYS.FPI values */
+#define LTQ_CGU_SYS_FPI_SHIFT 6
+#define LTQ_CGU_SYS_FPI_DDR_EQUAL 0x0
+#define LTQ_CGU_SYS_FPI_DDR_HALF 0x1
+
+/* Valid SYS.PPE values */
+#define LTQ_CGU_SYS_PPE_SHIFT 7
+#define LTQ_CGU_SYS_PPE_266_MHZ 0x0
+#define LTQ_CGU_SYS_PPE_240_MHZ 0x1
+#define LTQ_CGU_SYS_PPE_222_MHZ 0x2
+#define LTQ_CGU_SYS_PPE_133_MHZ 0x3
+
+#if (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_333_DDR_167)
+#define LTQ_CGU_SYS_CPU_CONFIG LTQ_CGU_SYS_CPU_DDR_TWICE
+#define LTQ_CGU_SYS_DDR_CONFIG LTQ_CGU_SYS_DDR_167_MHZ
+#define LTQ_CGU_SYS_FPI_CONFIG LTQ_CGU_SYS_FPI_DDR_HALF
+#define LTQ_CGU_SYS_PPE_CONFIG LTQ_CGU_SYS_PPE_266_MHZ
+#elif (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_111_DDR_111)
+#define LTQ_CGU_SYS_CPU_CONFIG LTQ_CGU_SYS_CPU_DDR_EQUAL
+#define LTQ_CGU_SYS_DDR_CONFIG LTQ_CGU_SYS_DDR_111_MHZ
+#define LTQ_CGU_SYS_FPI_CONFIG LTQ_CGU_SYS_FPI_DDR_HALF
+#define LTQ_CGU_SYS_PPE_CONFIG LTQ_CGU_SYS_PPE_133_MHZ
+#else
+#error "Invalid system clock configuration!"
+#endif
+
+/* Build register values */
+#define LTQ_CGU_SYS_VALUE ((LTQ_CGU_SYS_PPE_CONFIG << \
+ LTQ_CGU_SYS_PPE_SHIFT) | \
+ (LTQ_CGU_SYS_FPI_CONFIG << \
+ LTQ_CGU_SYS_FPI_SHIFT) | \
+ (LTQ_CGU_SYS_CPU_CONFIG << \
+ LTQ_CGU_SYS_CPU1_SHIFT) | \
+ (LTQ_CGU_SYS_CPU_CONFIG << \
+ LTQ_CGU_SYS_CPU0_SHIFT) | \
+ LTQ_CGU_SYS_DDR_CONFIG)
+
+/* Reset values for PLL registers for usage with 35.328 MHz crystal */
+#define PLL0_35MHZ_CONFIG 0x9D861059
+#define PLL1_35MHZ_CONFIG 0x1A260CD9
+#define PLL2_35MHZ_CONFIG 0x8000f1e5
+
+/* Reset values for PLL registers for usage with 36 MHz crystal */
+#define PLL0_36MHZ_CONFIG 0x1000125D
+#define PLL1_36MHZ_CONFIG 0x1B1E0C99
+#define PLL2_36MHZ_CONFIG 0x8002f2a1
+
+LEAF(ltq_cgu_init)
+ /* Load current CGU register value */
+ li t0, (LTQ_CGU_BASE | KSEG1)
+ lw t1, LTQ_CGU_SYS(t0)
+
+ /* Load target CGU register values */
+ li t3, LTQ_CGU_SYS_VALUE
+
+ /* Only update registers if values differ */
+ beq t1, t3, finished
+
+ /*
+ * Check whether the XTAL_F bit in RST_STAT register is set or not.
+ * This bit is latched in via pin strapping. If bit is set then
+ * clock source is a 36 MHz crystal. Otherwise a 35.328 MHz crystal.
+ */
+ li t1, (LTQ_RCU_BASE | KSEG1)
+ lw t2, LTQ_RCU_RST_STAT(t1)
+ and t2, t2, LTQ_RCU_RST_STAT_XTAL_F
+ beq t2, LTQ_RCU_RST_STAT_XTAL_F, boot_36mhz
+
+boot_35mhz:
+ /* Configure PLL for 35.328 MHz */
+ li t2, PLL0_35MHZ_CONFIG
+ sw t2, LTQ_CGU_PLL0_CFG(t0)
+ li t2, PLL1_35MHZ_CONFIG
+ sw t2, LTQ_CGU_PLL1_CFG(t0)
+ li t2, PLL2_35MHZ_CONFIG
+ sw t2, LTQ_CGU_PLL2_CFG(t0)
+
+ b do_reset
+
+boot_36mhz:
+ /* Configure PLL for 36 MHz */
+ li t2, PLL0_36MHZ_CONFIG
+ sw t2, LTQ_CGU_PLL0_CFG(t0)
+ li t2, PLL1_36MHZ_CONFIG
+ sw t2, LTQ_CGU_PLL1_CFG(t0)
+ li t2, PLL2_36MHZ_CONFIG
+ sw t2, LTQ_CGU_PLL2_CFG(t0)
+
+do_reset:
+ /* Store new clock config */
+ sw t3, LTQ_CGU_SYS(t0)
+
+ /* Perform software reset to activate new clock config */
+ li t2, LTQ_RCU_RST_REQ_VALUE
+ sw t2, LTQ_RCU_RST_REQ(t1)
+
+wait_reset:
+ b wait_reset
+
+finished:
+ jr ra
+
+ END(ltq_cgu_init)
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/chipid.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/chipid.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_CHIPID_VERSION_SHIFT 28
+#define LTQ_CHIPID_VERSION_MASK (0xF << LTQ_CHIPID_VERSION_SHIFT)
+#define LTQ_CHIPID_PNUM_SHIFT 12
+#define LTQ_CHIPID_PNUM_MASK (0xFFFF << LTQ_CHIPID_PNUM_SHIFT)
+
+struct ltq_chipid_regs {
+ u32 manid; /* Manufacturer identification */
+ u32 chipid; /* Chip identification */
+};
+
+static struct ltq_chipid_regs *ltq_chipid_regs =
+ (struct ltq_chipid_regs *) CKSEG1ADDR(LTQ_CHIPID_BASE);
+
+unsigned int ltq_chip_version_get(void)
+{
+ u32 chipid;
+
+ chipid = ltq_readl(&ltq_chipid_regs->chipid);
+
+ return (chipid & LTQ_CHIPID_VERSION_MASK) >> LTQ_CHIPID_VERSION_SHIFT;
+}
+
+unsigned int ltq_chip_partnum_get(void)
+{
+ u32 chipid;
+
+ chipid = ltq_readl(&ltq_chipid_regs->chipid);
+
+ return (chipid & LTQ_CHIPID_PNUM_MASK) >> LTQ_CHIPID_PNUM_SHIFT;
+}
+
+const char *ltq_chip_partnum_str(void)
+{
+ enum ltq_chip_partnum partnum = ltq_chip_partnum_get();
+
+ switch (partnum) {
+ case LTQ_SOC_DANUBE:
+ return "Danube";
+ case LTQ_SOC_DANUBE_S:
+ return "Danube-S";
+ case LTQ_SOC_TWINPASS:
+ return "Twinpass";
+ default:
+ printf("Unknown partnum: %x\n", partnum);
+ }
+
+ return "";
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/config.mk
@@ -0,0 +1,25 @@
+#
+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PF_CPPFLAGS_DANUBE := $(call cc-option,-mtune=24kec,)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_DANUBE)
+
+ifdef CONFIG_SPL_BUILD
+PF_ABICALLS := -mno-abicalls
+PF_PIC := -fno-pic
+PF_PIE :=
+USE_PRIVATE_LIBGCC := yes
+endif
+
+LIBS-y += $(CPUDIR)/lantiq-common/liblantiq-common.o
+
+ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_SYS_BOOT_NORSPL
+ALL-y += $(obj)u-boot.ltq.norspl
+ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.norspl
+ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.norspl
+endif
+endif
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/ebu.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/io.h>
+
+#define EBU_ADDRSEL_MASK(mask) ((mask & 0xf) << 4)
+#define EBU_ADDRSEL_REGEN (1 << 0)
+
+#define EBU_CON_WRDIS (1 << 31)
+#define EBU_CON_AGEN_DEMUX (0x0 << 24)
+#define EBU_CON_AGEN_MUX (0x2 << 24)
+#define EBU_CON_SETUP (1 << 22)
+#define EBU_CON_WAIT_DIS (0x0 << 20)
+#define EBU_CON_WAIT_ASYNC (0x1 << 20)
+#define EBU_CON_WAIT_SYNC (0x2 << 20)
+#define EBU_CON_WINV (1 << 19)
+#define EBU_CON_PW_8BIT (0x0 << 16)
+#define EBU_CON_PW_16BIT (0x1 << 16)
+#define EBU_CON_ALEC(cycles) ((cycles & 0x3) << 14)
+#define EBU_CON_BCGEN_CS (0x0 << 12)
+#define EBU_CON_BCGEN_INTEL (0x1 << 12)
+#define EBU_CON_BCGEN_MOTOROLA (0x2 << 12)
+#define EBU_CON_WAITWRC(cycles) ((cycles & 0x7) << 8)
+#define EBU_CON_WAITRDC(cycles) ((cycles & 0x3) << 6)
+#define EBU_CON_HOLDC(cycles) ((cycles & 0x3) << 4)
+#define EBU_CON_RECOVC(cycles) ((cycles & 0x3) << 2)
+#define EBU_CON_CMULT_1 0x0
+#define EBU_CON_CMULT_4 0x1
+#define EBU_CON_CMULT_8 0x2
+#define EBU_CON_CMULT_16 0x3
+
+#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
+#define ebu_region0_enable 1
+#else
+#define ebu_region0_enable 0
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
+#define ebu_region1_enable 1
+#else
+#define ebu_region1_enable 0
+#endif
+
+struct ltq_ebu_regs {
+ u32 clc;
+ u32 rsvd0[3];
+ u32 con;
+ u32 rsvd1[3];
+ u32 addr_sel_0;
+ u32 addr_sel_1;
+ u32 rsvd2[14];
+ u32 con_0;
+ u32 con_1;
+};
+
+static struct ltq_ebu_regs *ltq_ebu_regs =
+ (struct ltq_ebu_regs *) CKSEG1ADDR(LTQ_EBU_BASE);
+
+void ltq_ebu_init(void)
+{
+ if (ebu_region0_enable) {
+ /*
+ * Map EBU region 0 to range 0x10000000-0x13ffffff and enable
+ * region control. This supports up to 32 MiB NOR flash in
+ * bank 0.
+ */
+ ltq_writel(&ltq_ebu_regs->addr_sel_0, LTQ_EBU_REGION0_BASE |
+ EBU_ADDRSEL_MASK(1) | EBU_ADDRSEL_REGEN);
+
+ ltq_writel(&ltq_ebu_regs->con_0, EBU_CON_AGEN_DEMUX |
+ EBU_CON_WAIT_DIS | EBU_CON_PW_16BIT |
+ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
+ EBU_CON_WAITWRC(7) | EBU_CON_WAITRDC(3) |
+ EBU_CON_HOLDC(3) | EBU_CON_RECOVC(3) |
+ EBU_CON_CMULT_16);
+ } else
+ ltq_clrbits(&ltq_ebu_regs->addr_sel_0, EBU_ADDRSEL_REGEN);
+
+ if (ebu_region1_enable) {
+ /*
+ * Map EBU region 1 to range 0x14000000-0x13ffffff and enable
+ * region control. This supports NAND flash in bank 1.
+ */
+ ltq_writel(&ltq_ebu_regs->addr_sel_1, LTQ_EBU_REGION1_BASE |
+ EBU_ADDRSEL_MASK(3) | EBU_ADDRSEL_REGEN);
+
+ ltq_writel(&ltq_ebu_regs->con_1, EBU_CON_AGEN_DEMUX |
+ EBU_CON_SETUP | EBU_CON_WAIT_DIS | EBU_CON_PW_8BIT |
+ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
+ EBU_CON_WAITWRC(2) | EBU_CON_WAITRDC(2) |
+ EBU_CON_HOLDC(1) | EBU_CON_RECOVC(1) |
+ EBU_CON_CMULT_4);
+ } else
+ ltq_clrbits(&ltq_ebu_regs->addr_sel_1, EBU_ADDRSEL_REGEN);
+}
+
+void *flash_swap_addr(unsigned long addr)
+{
+ return (void *)(addr ^ 2);
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/mem.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/io.h>
+
+static void *ltq_mc_ddr_base = (void *) CKSEG1ADDR(LTQ_MC_DDR_BASE);
+
+static inline u32 ltq_mc_dc_read(u32 index)
+{
+ return ltq_readl(ltq_mc_ddr_base + LTQ_MC_DDR_DC_OFFSET(index));
+}
+
+phys_size_t initdram(int board_type)
+{
+ u32 col, row, dc04, dc19, dc20;
+
+ dc04 = ltq_mc_dc_read(4);
+ dc19 = ltq_mc_dc_read(19);
+ dc20 = ltq_mc_dc_read(20);
+
+ row = (dc04 & 0xF) - ((dc19 & 0x700) >> 8);
+ col = ((dc04 & 0xF00) >> 8) - (dc20 & 0x7);
+
+ return (1 << (row + col)) * 4 * 2;
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/mem_init.S
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/addrspace.h>
+#include <asm/arch/soc.h>
+
+/* Must be configured in BOARDDIR */
+#include <ddr_settings.h>
+
+#define LTQ_MC_GEN_ERRCAUSE 0x0010
+#define LTQ_MC_GEN_ERRADDR 0x0020
+#define LTQ_MC_GEN_CON 0x0060
+#define LTQ_MC_GEN_STAT 0x0070
+#define LTQ_MC_GEN_CON_SRAM_DDR_ENABLE 0x5
+#define LTQ_MC_GEN_STAT_DLCK_PWRON 0xC
+
+#define LTQ_MC_DDR_DC03_MC_START 0x100
+
+ /* Store given value in MC DDR CCRx register */
+ .macro dc_sw num, val
+ li t2, \val
+ sw t2, LTQ_MC_DDR_DC_OFFSET(\num)(t1)
+ .endm
+
+LEAF(ltq_mem_init)
+ /* Load MC General and MC DDR module base */
+ li t0, (LTQ_MC_GEN_BASE | KSEG1)
+ li t1, (LTQ_MC_DDR_BASE | KSEG1)
+
+ /* Clear access error log registers */
+ sw zero, LTQ_MC_GEN_ERRCAUSE(t0)
+ sw zero, LTQ_MC_GEN_ERRADDR(t0)
+
+ /* Enable DDR and SRAM module in memory controller */
+ li t2, LTQ_MC_GEN_CON_SRAM_DDR_ENABLE
+ sw t2, LTQ_MC_GEN_CON(t0)
+
+ /* Clear start bit of DDR memory controller */
+ sw zero, LTQ_MC_DDR_DC_OFFSET(3)(t1)
+
+ /* Init memory controller registers with values ddr_settings.h */
+ dc_sw 0, MC_DC00_VALUE
+ dc_sw 1, MC_DC01_VALUE
+ dc_sw 2, MC_DC02_VALUE
+ dc_sw 4, MC_DC04_VALUE
+ dc_sw 5, MC_DC05_VALUE
+ dc_sw 6, MC_DC06_VALUE
+ dc_sw 7, MC_DC07_VALUE
+ dc_sw 8, MC_DC08_VALUE
+ dc_sw 9, MC_DC09_VALUE
+
+ dc_sw 10, MC_DC10_VALUE
+ dc_sw 11, MC_DC11_VALUE
+ dc_sw 12, MC_DC12_VALUE
+ dc_sw 13, MC_DC13_VALUE
+ dc_sw 14, MC_DC14_VALUE
+ dc_sw 15, MC_DC15_VALUE
+ dc_sw 16, MC_DC16_VALUE
+ dc_sw 17, MC_DC17_VALUE
+ dc_sw 18, MC_DC18_VALUE
+ dc_sw 19, MC_DC19_VALUE
+
+ dc_sw 20, MC_DC20_VALUE
+ dc_sw 21, MC_DC21_VALUE
+ dc_sw 22, MC_DC22_VALUE
+ dc_sw 23, MC_DC23_VALUE
+ dc_sw 24, MC_DC24_VALUE
+ dc_sw 25, MC_DC25_VALUE
+ dc_sw 26, MC_DC26_VALUE
+ dc_sw 27, MC_DC27_VALUE
+ dc_sw 28, MC_DC28_VALUE
+ dc_sw 29, MC_DC29_VALUE
+
+ dc_sw 30, MC_DC30_VALUE
+ dc_sw 31, MC_DC31_VALUE
+ dc_sw 32, MC_DC32_VALUE
+ dc_sw 33, MC_DC33_VALUE
+ dc_sw 34, MC_DC34_VALUE
+ dc_sw 35, MC_DC35_VALUE
+ dc_sw 36, MC_DC36_VALUE
+ dc_sw 37, MC_DC37_VALUE
+ dc_sw 38, MC_DC38_VALUE
+ dc_sw 39, MC_DC39_VALUE
+
+ dc_sw 40, MC_DC40_VALUE
+ dc_sw 41, MC_DC41_VALUE
+ dc_sw 42, MC_DC42_VALUE
+ dc_sw 43, MC_DC43_VALUE
+ dc_sw 44, MC_DC44_VALUE
+ dc_sw 45, MC_DC45_VALUE
+ dc_sw 46, MC_DC46_VALUE
+
+ /* Set start bit of DDR memory controller */
+ li t2, LTQ_MC_DDR_DC03_MC_START
+ sw t2, LTQ_MC_DDR_DC_OFFSET(3)(t1)
+
+ /* Wait until DLL has locked and core is ready for data transfers */
+wait_ready:
+ lw t2, LTQ_MC_GEN_STAT(t0)
+ li t3, LTQ_MC_GEN_STAT_DLCK_PWRON
+ and t2, t3
+ bne t2, t3, wait_ready
+
+finished:
+ jr ra
+
+ END(ltq_mem_init)
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/pmu.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/pm.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_PMU_PWDCR_RESERVED 0xFD0C001C
+
+#define LTQ_PMU_PWDCR_TDM (1 << 25)
+#define LTQ_PMU_PWDCR_PPE_ENET0 (1 << 23)
+#define LTQ_PMU_PWDCR_PPE_ENET1 (1 << 22)
+#define LTQ_PMU_PWDCR_PPE_TC (1 << 21)
+#define LTQ_PMU_PWDCR_DEU (1 << 20)
+#define LTQ_PMU_PWDCR_UART1 (1 << 17)
+#define LTQ_PMU_PWDCR_SDIO (1 << 16)
+#define LTQ_PMU_PWDCR_AHB (1 << 15)
+#define LTQ_PMU_PWDCR_FPI0 (1 << 14)
+#define LTQ_PMU_PWDCR_PPE (1 << 13)
+#define LTQ_PMU_PWDCR_GPTC (1 << 12)
+#define LTQ_PMU_PWDCR_LEDC (1 << 11)
+#define LTQ_PMU_PWDCR_EBU (1 << 10)
+#define LTQ_PMU_PWDCR_DSL (1 << 9)
+#define LTQ_PMU_PWDCR_SPI (1 << 8)
+#define LTQ_PMU_PWDCR_UART0 (1 << 7)
+#define LTQ_PMU_PWDCR_USB (1 << 6)
+#define LTQ_PMU_PWDCR_DMA (1 << 5)
+#define LTQ_PMU_PWDCR_FPI1 (1 << 1)
+#define LTQ_PMU_PWDCR_USB_PHY (1 << 0)
+
+struct ltq_pmu_regs {
+ u32 rsvd0[7];
+ u32 pwdcr;
+ u32 sr;
+ u32 pwdcr1;
+ u32 sr1;
+};
+
+static struct ltq_pmu_regs *ltq_pmu_regs =
+ (struct ltq_pmu_regs *) CKSEG1ADDR(LTQ_PMU_BASE);
+
+u32 ltq_pm_map(enum ltq_pm_modules module)
+{
+ u32 val;
+
+ switch (module) {
+ case LTQ_PM_CORE:
+ val = LTQ_PMU_PWDCR_UART1 | LTQ_PMU_PWDCR_FPI0 |
+ LTQ_PMU_PWDCR_LEDC | LTQ_PMU_PWDCR_EBU;
+ break;
+ case LTQ_PM_DMA:
+ val = LTQ_PMU_PWDCR_DMA;
+ break;
+ case LTQ_PM_ETH:
+ val = LTQ_PMU_PWDCR_PPE_ENET0 | LTQ_PMU_PWDCR_PPE_TC |
+ LTQ_PMU_PWDCR_PPE;
+ break;
+ case LTQ_PM_SPI:
+ val = LTQ_PMU_PWDCR_SPI;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+int ltq_pm_enable(enum ltq_pm_modules module)
+{
+ const unsigned long timeout = 1000;
+ unsigned long timebase;
+ u32 sr, val;
+
+ val = ltq_pm_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_clrbits(&ltq_pmu_regs->pwdcr, val);
+
+ timebase = get_timer(0);
+
+ do {
+ sr = ltq_readl(&ltq_pmu_regs->sr);
+ if (~sr & val)
+ return 0;
+ } while (get_timer(timebase) < timeout);
+
+ return 1;
+}
+
+int ltq_pm_disable(enum ltq_pm_modules module)
+{
+ u32 val;
+
+ val = ltq_pm_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_setbits(&ltq_pmu_regs->pwdcr, val);
+
+ return 0;
+}
+
+void ltq_pmu_init(void)
+{
+ u32 set, clr;
+
+ clr = ltq_pm_map(LTQ_PM_CORE);
+ set = ~(LTQ_PMU_PWDCR_RESERVED | clr);
+
+ ltq_clrsetbits(&ltq_pmu_regs->pwdcr, clr, set);
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/danube/rcu.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/cpu.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_RCU_RD_SRST (1 << 30) /* Global SW Reset */
+#define LTQ_RCU_RD_MC (1 << 14) /* Memory Controller */
+#define LTQ_RCU_RD_PCI (1 << 13) /* PCI core */
+#define LTQ_RCU_RD_DFE_AFE (1 << 12) /* Voice DFE/AFE */
+#define LTQ_RCU_RD_DSL_AFE (1 << 11) /* DSL AFE */
+#define LTQ_RCU_RD_SDIO (1 << 10) /* SDIO core */
+#define LTQ_RCU_RD_DMA (1 << 9) /* DMA core */
+#define LTQ_RCU_RD_PPE (1 << 8) /* PPE core */
+#define LTQ_RCU_RD_ARC_DFE (1 << 7) /* ARC/DFE core */
+#define LTQ_RCU_RD_AHB (1 << 6) /* AHB bus */
+#define LTQ_RCU_RD_ENET_MAC1 (1 << 5) /* Ethernet MAC1 */
+#define LTQ_RCU_RD_USB (1 << 4) /* USB and Phy core */
+#define LTQ_RCU_RD_CPU1 (1 << 3) /* CPU1 subsystem */
+#define LTQ_RCU_RD_FPI (1 << 2) /* FPI bus */
+#define LTQ_RCU_RD_CPU0 (1 << 1) /* CPU0 subsystem */
+#define LTQ_RCU_RD_HRST (1 << 0) /* HW reset via HRST pin */
+
+#define LTQ_RCU_STAT_BOOT_SHIFT 18
+#define LTQ_RCU_STAT_BOOT_MASK (0x7 << LTQ_RCU_STAT_BOOT_SHIFT)
+
+struct ltq_rcu_regs {
+ u32 rsvd0[4];
+ u32 req; /* Reset request */
+ u32 stat; /* Reset status */
+ u32 usb_cfg; /* USB configure */
+ u32 rsvd1[2];
+ u32 pci_rdy; /* PCI boot ready */
+};
+
+static struct ltq_rcu_regs *ltq_rcu_regs =
+ (struct ltq_rcu_regs *) CKSEG1ADDR(LTQ_RCU_BASE);
+
+u32 ltq_reset_map(enum ltq_reset_modules module)
+{
+ u32 val;
+
+ switch (module) {
+ case LTQ_RESET_CORE:
+ case LTQ_RESET_SOFT:
+ val = LTQ_RCU_RD_SRST | LTQ_RCU_RD_CPU1;
+ break;
+ case LTQ_RESET_DMA:
+ val = LTQ_RCU_RD_DMA;
+ break;
+ case LTQ_RESET_ETH:
+ val = LTQ_RCU_RD_PPE;
+ break;
+ case LTQ_RESET_HARD:
+ val = LTQ_RCU_RD_HRST;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+int ltq_reset_activate(enum ltq_reset_modules module)
+{
+ u32 val;
+
+ val = ltq_reset_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_setbits(&ltq_rcu_regs->req, val);
+
+ return 0;
+}
+
+int ltq_reset_deactivate(enum ltq_reset_modules module)
+{
+ u32 val;
+
+ val = ltq_reset_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_clrbits(&ltq_rcu_regs->req, val);
+
+ return 0;
+}
+
+enum ltq_boot_select ltq_boot_select(void)
+{
+ u32 stat;
+ unsigned int bootstrap;
+
+ stat = ltq_readl(&ltq_rcu_regs->stat);
+ bootstrap = (stat & LTQ_RCU_STAT_BOOT_MASK) >> LTQ_RCU_STAT_BOOT_SHIFT;
+
+ switch (bootstrap) {
+ case 0:
+ return BOOT_NOR_NO_BOOTROM;
+ case 1:
+ return BOOT_NOR;
+ case 2:
+ return BOOT_MII0;
+ case 3:
+ return BOOT_PCI;
+ case 4:
+ return BOOT_UART;
+ case 5:
+ return BOOT_SPI;
+ case 6:
+ return BOOT_NAND;
+ case 7:
+ return BOOT_RMII0;
+ default:
+ return BOOT_UNKNOWN;
+ }
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/Makefile
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)liblantiq-common.o
+
+START = start.o
+COBJS-y = cpu.o pmu.o
+COBJS-$(CONFIG_SPL_BUILD) += spl.o
+SOBJS-y = lowlevel_init.o
+
+COBJS := $(COBJS-y)
+SOBJS := $(SOBJS-y)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/cpu.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/chipid.h>
+#include <asm/lantiq/clk.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/cpu.h>
+
+static const char ltq_bootsel_strings[][16] = {
+ "NOR",
+ "NOR w/o BootROM",
+ "UART",
+ "UART w/o EEPROM",
+ "SPI",
+ "NAND",
+ "PCI",
+ "MII0",
+ "RMII0",
+ "RGMII1",
+ "unknown",
+};
+
+const char *ltq_boot_select_str(void)
+{ enum ltq_boot_select bootsel = ltq_boot_select();
+
+ if (bootsel > BOOT_UNKNOWN)
+ bootsel = BOOT_UNKNOWN;
+
+ return ltq_bootsel_strings[bootsel];
+}
+
+void ltq_chip_print_info(void)
+{
+ char buf[32];
+
+ printf("SoC: Lantiq %s v1.%u\n", ltq_chip_partnum_str(),
+ ltq_chip_version_get());
+ printf("CPU: %s MHz\n", strmhz(buf, ltq_get_cpu_clock()));
+ printf("IO: %s MHz\n", strmhz(buf, ltq_get_io_region_clock()));
+ printf("BUS: %s MHz\n", strmhz(buf, ltq_get_bus_clock()));
+ printf("BOOT: %s\n", ltq_boot_select_str());
+}
+
+int arch_cpu_init(void)
+{
+ ltq_pmu_init();
+ ltq_ebu_init();
+
+ return 0;
+}
+
+void _machine_restart(void)
+{
+ ltq_reset_activate(LTQ_RESET_CORE);
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/lowlevel_init.S
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+NESTED(lowlevel_init, 0, ra)
+ move t8, ra
+
+ la t7, ltq_cgu_init
+ jalr t7
+
+ la t7, ltq_mem_init
+ jalr t7
+
+ jr t8
+ END(lowlevel_init)
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/pmu.c
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/pm.h>
+
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/spl.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <image.h>
+#include <version.h>
+#include <spi_flash.h>
+#include <linux/compiler.h>
+#include <lzma/LzmaDec.h>
+#include <linux/lzo.h>
+#include <asm/mipsregs.h>
+
+#if defined(CONFIG_LTQ_SPL_CONSOLE)
+#define spl_has_console 1
+
+#if defined(CONFIG_LTQ_SPL_DEBUG)
+#define spl_has_debug 1
+#else
+#define spl_has_debug 0
+#endif
+
+#else
+#define spl_has_console 0
+#define spl_has_debug 0
+#endif
+
+#define spl_debug(fmt, args...) \
+ do { \
+ if (spl_has_debug) \
+ printf(fmt, ##args); \
+ } while (0)
+
+#define spl_puts(msg) \
+ do { \
+ if (spl_has_console) \
+ puts(msg); \
+ } while (0)
+
+#if defined(CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH) && defined(CONFIG_SYS_BOOT_SFSPL)
+#define spl_boot_spi_flash 1
+#else
+#define spl_boot_spi_flash 0
+#ifndef CONFIG_SPL_SPI_BUS
+#define CONFIG_SPL_SPI_BUS 0
+#endif
+#ifndef CONFIG_SPL_SPI_CS
+#define CONFIG_SPL_SPI_CS 0
+#endif
+#ifndef CONFIG_SPL_SPI_MAX_HZ
+#define CONFIG_SPL_SPI_MAX_HZ 0
+#endif
+#ifndef CONFIG_SPL_SPI_MODE
+#define CONFIG_SPL_SPI_MODE 0
+#endif
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH) && defined(CONFIG_SYS_BOOT_NORSPL)
+#define spl_boot_nor_flash 1
+#else
+#define spl_boot_nor_flash 0
+#endif
+
+#define spl_sync() __asm__ __volatile__("sync");
+
+struct spl_image {
+ ulong data_addr;
+ ulong entry_addr;
+ ulong data_size;
+ ulong entry_size;
+ ulong data_crc;
+ u8 comp;
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Emulated malloc area needed for LZMA allocator in BSS */
+static u8 *spl_mem_ptr __maybe_unused;
+static size_t spl_mem_size __maybe_unused;
+
+static int spl_is_comp_lzma(const struct spl_image *spl)
+{
+#if defined(CONFIG_LTQ_SPL_COMP_LZMA)
+ return spl->comp == IH_COMP_LZMA;
+#else
+ return 0;
+#endif
+}
+
+static int spl_is_comp_lzo(const struct spl_image *spl)
+{
+#if defined(CONFIG_LTQ_SPL_COMP_LZO)
+ return spl->comp == IH_COMP_LZO;
+#else
+ return 0;
+#endif
+}
+
+static int spl_is_compressed(const struct spl_image *spl)
+{
+ if (spl_is_comp_lzma(spl))
+ return 1;
+
+ if (spl_is_comp_lzo(spl))
+ return 1;
+
+ return 0;
+}
+
+static void spl_console_init(void)
+{
+ if (!spl_has_console)
+ return;
+
+ gd->flags |= GD_FLG_RELOC;
+ gd->baudrate = CONFIG_BAUDRATE;
+
+ serial_init();
+
+ gd->have_console = 1;
+
+ spl_puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
+ U_BOOT_TIME ")\n");
+}
+
+static int spl_parse_image(const image_header_t *hdr, struct spl_image *spl)
+{
+ spl_puts("SPL: checking U-Boot image\n");
+
+ if (!image_check_magic(hdr)) {
+ spl_puts("SPL: invalid magic\n");
+ return -1;
+ }
+
+ if (!image_check_hcrc(hdr)) {
+ spl_puts("SPL: invalid header CRC\n");
+ return -1;
+ }
+
+ spl->data_addr += image_get_header_size();
+ spl->entry_addr = image_get_load(hdr);
+ spl->data_size = image_get_data_size(hdr);
+ spl->data_crc = image_get_dcrc(hdr);
+ spl->comp = image_get_comp(hdr);
+
+ spl_debug("SPL: data %08lx, size %lu, entry %08lx, comp %u\n",
+ spl->data_addr, spl->data_size, spl->entry_addr, spl->comp);
+
+ return 0;
+}
+
+static int spl_check_data(const struct spl_image *spl, ulong loadaddr)
+{
+ ulong dcrc = crc32(0, (unsigned char *)loadaddr, spl->data_size);
+
+ if (dcrc != spl->data_crc) {
+ spl_puts("SPL: invalid data CRC\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+static void *spl_lzma_alloc(void *p, size_t size)
+{
+ u8 *ret;
+
+ if (size > spl_mem_size)
+ return NULL;
+
+ ret = spl_mem_ptr;
+ spl_mem_ptr += size;
+ spl_mem_size -= size;
+
+ return ret;
+}
+
+static void spl_lzma_free(void *p, void *addr)
+{
+}
+
+static int spl_copy_image(struct spl_image *spl)
+{
+ spl_puts("SPL: copying U-Boot to RAM\n");
+
+ memcpy((void *) spl->entry_addr, (const void *) spl->data_addr,
+ spl->data_size);
+
+ spl->entry_size = spl->data_size;
+
+ return 0;
+}
+
+static int spl_uncompress_lzma(struct spl_image *spl, unsigned long loadaddr)
+{
+ SRes res;
+ const Byte *prop = (const Byte *) loadaddr;
+ const Byte *src = (const Byte *) loadaddr + LZMA_PROPS_SIZE +
+ sizeof(uint64_t);
+ Byte *dest = (Byte *) spl->entry_addr;
+ SizeT dest_len = 0xFFFFFFFF;
+ SizeT src_len = spl->data_size - LZMA_PROPS_SIZE;
+ ELzmaStatus status = 0;
+ ISzAlloc alloc;
+
+ spl_puts("SPL: decompressing U-Boot with LZMA\n");
+
+ alloc.Alloc = spl_lzma_alloc;
+ alloc.Free = spl_lzma_free;
+ spl_mem_ptr = (u8 *) CONFIG_SPL_MALLOC_BASE;
+ spl_mem_size = CONFIG_SPL_MALLOC_MAX_SIZE;
+
+ res = LzmaDecode(dest, &dest_len, src, &src_len, prop, LZMA_PROPS_SIZE,
+ LZMA_FINISH_ANY, &status, &alloc);
+ if (res != SZ_OK)
+ return 1;
+
+ spl->entry_size = dest_len;
+
+ return 0;
+}
+
+static int spl_uncompress_lzo(struct spl_image *spl, unsigned long loadaddr)
+{
+ size_t len;
+ int ret;
+
+ spl_puts("SPL: decompressing U-Boot with LZO\n");
+
+ ret = lzop_decompress(
+ (const unsigned char*) loadaddr, spl->data_size,
+ (unsigned char *) spl->entry_addr, &len);
+
+ spl->entry_size = len;
+
+ return ret;
+}
+
+static int spl_uncompress(struct spl_image *spl, unsigned long loadaddr)
+{
+ int ret;
+
+ if (spl_is_comp_lzma(spl))
+ ret = spl_uncompress_lzma(spl, loadaddr);
+ else if (spl_is_comp_lzo(spl))
+ ret = spl_uncompress_lzo(spl, loadaddr);
+ else
+ ret = 1;
+
+ return ret;
+}
+
+static int spl_load_spi_flash(struct spl_image *spl)
+{
+ struct spi_flash sf = { 0 };
+ image_header_t hdr;
+ int ret;
+ unsigned long loadaddr;
+
+ /*
+ * Image format:
+ *
+ * - 12 byte non-volatile bootstrap header
+ * - SPL binary
+ * - 12 byte non-volatile bootstrap header
+ * - 64 byte U-Boot mkimage header
+ * - U-Boot binary
+ */
+ spl->data_addr = image_copy_end() - CONFIG_SPL_TEXT_BASE + 24;
+
+ spl_puts("SPL: probing SPI flash\n");
+
+ spi_init();
+ ret = spl_spi_flash_probe(&sf);
+ if (ret)
+ return ret;
+
+ spl_debug("SPL: reading image header at offset %lx\n", spl->data_addr);
+
+ ret = spi_flash_read(&sf, spl->data_addr, sizeof(hdr), &hdr);
+ if (ret)
+ return ret;
+
+ spl_debug("SPL: checking image header at offset %lx\n", spl->data_addr);
+
+ ret = spl_parse_image(&hdr, spl);
+ if (ret)
+ return ret;
+
+ if (spl_is_compressed(spl))
+ loadaddr = CONFIG_LOADADDR;
+ else
+ loadaddr = spl->entry_addr;
+
+ spl_puts("SPL: loading U-Boot to RAM\n");
+
+ ret = spi_flash_read(&sf, spl->data_addr, spl->data_size,
+ (void *) loadaddr);
+
+ if (!spl_check_data(spl, loadaddr))
+ return -1;
+
+ if (spl_is_compressed(spl))
+ ret = spl_uncompress(spl, loadaddr);
+
+ return ret;
+}
+
+static int spl_load_nor_flash(struct spl_image *spl)
+{
+ const image_header_t *hdr;
+ int ret;
+
+ /*
+ * Image format:
+ *
+ * - SPL binary
+ * - 64 byte U-Boot mkimage header
+ * - U-Boot binary
+ */
+ spl->data_addr = image_copy_end();
+ hdr = (const image_header_t *) image_copy_end();
+
+ spl_debug("SPL: checking image header at address %p\n", hdr);
+
+ ret = spl_parse_image(hdr, spl);
+ if (ret)
+ return ret;
+
+ if (spl_is_compressed(spl))
+ ret = spl_uncompress(spl, spl->data_addr);
+ else
+ ret = spl_copy_image(spl);
+
+ return ret;
+}
+
+static int spl_load(struct spl_image *spl)
+{
+ int ret;
+
+ if (spl_boot_spi_flash)
+ ret = spl_load_spi_flash(spl);
+ else if (spl_boot_nor_flash)
+ ret = spl_load_nor_flash(spl);
+ else
+ ret = 1;
+
+ return ret;
+}
+
+void __noreturn spl_lantiq_init(void)
+{
+ void (*uboot)(void) __noreturn;
+ struct spl_image spl;
+ gd_t gd_data;
+ int ret;
+
+ gd = &gd_data;
+ barrier();
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ spl_console_init();
+
+ spl_debug("SPL: initializing\n");
+
+#if 0
+ spl_debug("CP0_CONFIG: %08x\n", read_c0_config());
+ spl_debug("CP0_CONFIG1: %08x\n", read_c0_config1());
+ spl_debug("CP0_CONFIG2: %08x\n", read_c0_config2());
+ spl_debug("CP0_CONFIG3: %08x\n", read_c0_config3());
+ spl_debug("CP0_CONFIG6: %08x\n", read_c0_config6());
+ spl_debug("CP0_CONFIG7: %08x\n", read_c0_config7());
+ spl_debug("CP0_STATUS: %08x\n", read_c0_status());
+ spl_debug("CP0_PRID: %08x\n", read_c0_prid());
+#endif
+
+ board_early_init_f();
+ timer_init();
+
+ memset(&spl, 0, sizeof(spl));
+
+ ret = spl_load(&spl);
+ if (ret)
+ goto hang;
+
+ spl_debug("SPL: U-Boot entry %08lx\n", spl.entry_addr);
+ spl_puts("SPL: jumping to U-Boot\n");
+
+ flush_cache(spl.entry_addr, spl.entry_size);
+ spl_sync();
+
+ uboot = (void *) spl.entry_addr;
+ uboot();
+
+hang:
+ spl_puts("SPL: cannot start U-Boot\n");
+
+ for (;;)
+ ;
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/start.S
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+#define S_PRIdCoID 16 /* Company ID (R) */
+#define M_PRIdCoID (0xff << S_PRIdCoID)
+#define S_PRIdImp 8 /* Implementation ID (R) */
+#define M_PRIdImp (0xff << S_PRIdImp)
+
+#define K_CacheAttrCWTnWA 0 /* Cacheable, write-thru, no write allocate */
+#define K_CacheAttrCWTWA 1 /* Cacheable, write-thru, write allocate */
+#define K_CacheAttrU 2 /* Uncached */
+#define K_CacheAttrC 3 /* Cacheable */
+#define K_CacheAttrCN 3 /* Cacheable, non-coherent */
+#define K_CacheAttrCCE 4 /* Cacheable, coherent, exclusive */
+#define K_CacheAttrCCS 5 /* Cacheable, coherent, shared */
+#define K_CacheAttrCCU 6 /* Cacheable, coherent, update */
+#define K_CacheAttrUA 7 /* Uncached accelerated */
+
+#define S_ConfigK23 28 /* Kseg2/3 coherency algorithm (FM MMU only) (R/W) */
+#define M_ConfigK23 (0x7 << S_ConfigK23)
+#define W_ConfigK23 3
+#define S_ConfigKU 25 /* Kuseg coherency algorithm (FM MMU only) (R/W) */
+#define M_ConfigKU (0x7 << S_ConfigKU)
+#define W_ConfigKU 3
+
+#define S_ConfigMM 18 /* Merge mode (implementation specific) */
+#define M_ConfigMM (0x1 << S_ConfigMM)
+
+#define S_StatusBEV 22 /* Enable Boot Exception Vectors (R/W) */
+#define M_StatusBEV (0x1 << S_StatusBEV)
+
+#define S_StatusFR 26 /* Enable 64-bit FPRs (R/W) */
+#define M_StatusFR (0x1 << S_StatusFR)
+
+#define S_ConfigK0 0 /* Kseg0 coherency algorithm (R/W) */
+#define M_ConfigK0 (0x7 << S_ConfigK0)
+
+#define CONFIG0_MIPS32_64_MSK 0x8000ffff
+#define STATUS_MIPS32_64_MSK 0xfffcffff
+
+#define STATUS_MIPS24K 0
+#define CONFIG0_MIPS24K ((K_CacheAttrCN << S_ConfigK23) |\
+ (K_CacheAttrCN << S_ConfigKU) |\
+ (M_ConfigMM))
+
+#define STATUS_MIPS34K 0
+#define CONFIG0_MIPS34K ((K_CacheAttrCN << S_ConfigK23) |\
+ (K_CacheAttrCN << S_ConfigKU) |\
+ (M_ConfigMM))
+
+#define STATUS_MIPS32_64 (M_StatusBEV | M_StatusFR)
+#define CONFIG0_MIPS32_64 (K_CacheAttrCN << S_ConfigK0)
+
+#ifdef CONFIG_SOC_XWAY_DANUBE
+#define CONFIG0_LANTIQ (CONFIG0_MIPS24K | CONFIG0_MIPS32_64)
+#define STATUS_LANTIQ (STATUS_MIPS24K | STATUS_MIPS32_64)
+#endif
+
+#ifdef CONFIG_SOC_XWAY_VRX200
+#define CONFIG0_LANTIQ (CONFIG0_MIPS34K | CONFIG0_MIPS32_64)
+#define STATUS_LANTIQ (STATUS_MIPS34K | STATUS_MIPS32_64)
+#endif
+
+
+ .set noreorder
+
+ .globl _start
+ .text
+_start:
+ /* Entry point */
+ b main
+ nop
+
+ /* Lantiq SoC Boot config word */
+ .org 0x10
+#ifdef CONFIG_SYS_XWAY_EBU_BOOTCFG
+ .word CONFIG_SYS_XWAY_EBU_BOOTCFG
+#else
+ .word 0
+#endif
+ .word 0
+
+ .align 4
+main:
+
+ /* Init Timer */
+ mtc0 zero, CP0_COUNT
+ mtc0 zero, CP0_COMPARE
+
+ /* Setup MIPS24K/MIPS34K specifics (implementation dependent fields) */
+ mfc0 t0, CP0_CONFIG
+ li t1, CONFIG0_MIPS32_64_MSK
+ and t0, t1
+ li t1, CONFIG0_LANTIQ
+ or t0, t1
+ mtc0 t0, CP0_CONFIG
+
+ mfc0 t0, CP0_STATUS
+ li t1, STATUS_MIPS32_64_MSK
+ and t0, t1
+ li t1, STATUS_LANTIQ
+ or t0, t1
+ mtc0 t0, CP0_STATUS
+
+ /* Initialize CGU */
+ la t9, ltq_cgu_init
+ jalr t9
+ nop
+
+ /* Initialize memory controller */
+ la t9, ltq_mem_init
+ jalr t9
+ nop
+
+ /* Initialize caches... */
+ la t9, mips_cache_reset
+ jalr t9
+ nop
+
+ /* Clear BSS */
+ la t1, __bss_start
+ la t2, __bss_end
+ sub t1, 4
+1:
+ addi t1, 4
+ bltl t1, t2, 1b
+ sw zero, 0(t1)
+
+ /* Setup stack pointer and force alignment on a 16 byte boundary */
+ li t0, (CONFIG_SPL_STACK_BASE & ~0xF)
+ la sp, 0(t0)
+
+ la t9, spl_lantiq_init
+ jr t9
+ nop
--- /dev/null
+++ b/arch/mips/cpu/mips32/lantiq-common/u-boot-spl.lds
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+MEMORY { .spl_mem : ORIGIN = CONFIG_SPL_TEXT_BASE, \
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .bss_mem : ORIGIN = CONFIG_SPL_BSS_BASE, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = ALIGN(4);
+ .text : {
+ *(.text*)
+ } > .spl_mem
+
+ . = ALIGN(4);
+ .rodata : {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } > .spl_mem
+
+ . = ALIGN(4);
+ .data : {
+ *(SORT_BY_ALIGNMENT(.data*))
+ *(SORT_BY_ALIGNMENT(.sdata*))
+ } > .spl_mem
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ uboot_end_data = .;
+
+ .bss : {
+ __bss_start = .;
+ *(.bss*)
+ *(.sbss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } > .bss_mem
+
+ . = ALIGN(4);
+ __end = .;
+ uboot_end = .;
+}
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
@@ -105,7 +105,7 @@ reset:
mtc0 zero, CP0_COUNT
mtc0 zero, CP0_COMPARE
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_SYS_DISABLE_CACHE)
/* CONFIG0 register */
li t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/Makefile
@@ -0,0 +1,32 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS-y += cgu.o chipid.o dcdc.o ebu.o gphy.o mem.o pmu.o rcu.o
+SOBJS-y += cgu_init.o mem_init.o
+SOBJS-y += gphy_fw.o
+
+COBJS := $(COBJS-y)
+SOBJS := $(SOBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/cgu.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/gphy.h>
+#include <asm/lantiq/clk.h>
+#include <asm/lantiq/io.h>
+
+#define LTQ_CGU_PLL1_PLLN_SHIFT 6
+#define LTQ_CGU_PLL1_PLLN_MASK (0x3F << LTQ_CGU_PLL1_PLLN_SHIFT)
+#define LTQ_CGU_PLL1_PLLM_SHIFT 2
+#define LTQ_CGU_PLL1_PLLM_MASK (0xF << LTQ_CGU_PLL1_PLLM_SHIFT)
+#define LTQ_CGU_PLL1_PLLL (1 << 1)
+#define LTQ_CGU_PLL1_PLL_EN 1
+
+#define LTQ_CGU_SYS_OCP_SHIFT 0
+#define LTQ_CGU_SYS_OCP_MASK (0x3 << LTQ_CGU_SYS_OCP_SHIFT)
+#define LTQ_CGU_SYS_CPU_SHIFT 4
+#define LTQ_CGU_SYS_CPU_MASK (0xF << LTQ_CGU_SYS_CPU_SHIFT)
+
+#define LTQ_CGU_UPDATE 1
+
+#define LTQ_CGU_IFCLK_GPHY_SEL_SHIFT 2
+#define LTQ_CGU_IFCLK_GPHY_SEL_MASK (0x7 << LTQ_CGU_IFCLK_GPHY_SEL_SHIFT)
+
+struct ltq_cgu_regs {
+ u32 rsvd0;
+ u32 pll0_cfg; /* PLL0 config */
+ u32 pll1_cfg; /* PLL1 config */
+ u32 sys; /* System clock */
+ u32 clk_fsr; /* Clock frequency select */
+ u32 clk_gsr; /* Clock gating status */
+ u32 clk_gcr0; /* Clock gating control 0 */
+ u32 clk_gcr1; /* Clock gating control 1 */
+ u32 update; /* CGU update control */
+ u32 if_clk; /* Interface clock */
+ u32 ddr; /* DDR memory control */
+ u32 ct1_sr; /* CT status 1 */
+ u32 ct_kval; /* CT K value */
+ u32 pcm_cr; /* PCM control */
+ u32 pci_cr; /* PCI clock control */
+ u32 rsvd1;
+ u32 gphy1_cfg; /* GPHY1 config */
+ u32 gphy0_cfg; /* GPHY0 config */
+ u32 rsvd2[6];
+ u32 pll2_cfg; /* PLL2 config */
+};
+
+static struct ltq_cgu_regs *ltq_cgu_regs =
+ (struct ltq_cgu_regs *) CKSEG1ADDR(LTQ_CGU_BASE);
+
+static inline u32 ltq_cgu_sys_readl(u32 mask, u32 shift)
+{
+ return (ltq_readl(&ltq_cgu_regs->sys) & mask) >> shift;
+}
+
+unsigned long ltq_get_io_region_clock(void)
+{
+ unsigned int ocp_sel;
+ unsigned long clk, cpu_clk;
+
+ cpu_clk = ltq_get_cpu_clock();
+
+ ocp_sel = ltq_cgu_sys_readl(LTQ_CGU_SYS_OCP_MASK,
+ LTQ_CGU_SYS_OCP_SHIFT);
+
+ switch (ocp_sel) {
+ case 0:
+ /* OCP ratio 1 */
+ clk = cpu_clk;
+ break;
+ case 2:
+ /* OCP ratio 2 */
+ clk = cpu_clk / 2;
+ break;
+ case 3:
+ /* OCP ratio 2.5 */
+ clk = (cpu_clk * 2) / 5;
+ break;
+ case 4:
+ /* OCP ratio 3 */
+ clk = cpu_clk / 3;
+ break;
+ default:
+ clk = 0;
+ break;
+ }
+
+ return clk;
+}
+
+unsigned long ltq_get_cpu_clock(void)
+{
+ unsigned int cpu_sel;
+ unsigned long clk;
+
+ cpu_sel = ltq_cgu_sys_readl(LTQ_CGU_SYS_CPU_MASK,
+ LTQ_CGU_SYS_CPU_SHIFT);
+
+ switch (cpu_sel) {
+ case 0:
+ clk = CLOCK_600_MHZ;
+ break;
+ case 1:
+ clk = CLOCK_500_MHZ;
+ break;
+ case 2:
+ clk = CLOCK_393_MHZ;
+ break;
+ case 3:
+ clk = CLOCK_333_MHZ;
+ break;
+ case 5:
+ case 6:
+ clk = CLOCK_197_MHZ;
+ break;
+ case 7:
+ clk = CLOCK_166_MHZ;
+ break;
+ case 4:
+ case 8:
+ case 9:
+ clk = CLOCK_125_MHZ;
+ break;
+ default:
+ clk = 0;
+ break;
+ }
+
+ return clk;
+}
+
+unsigned long ltq_get_bus_clock(void)
+{
+ return ltq_get_io_region_clock();
+}
+
+void ltq_cgu_gphy_clk_src(enum ltq_gphy_clk clk)
+{
+ ltq_clrbits(&ltq_cgu_regs->if_clk, LTQ_CGU_IFCLK_GPHY_SEL_MASK);
+ ltq_setbits(&ltq_cgu_regs->if_clk, clk << LTQ_CGU_IFCLK_GPHY_SEL_SHIFT);
+}
+
+static inline int ltq_cgu_pll1_locked(void)
+{
+ u32 pll1_cfg = ltq_readl(&ltq_cgu_regs->pll1_cfg);
+
+ return pll1_cfg & LTQ_CGU_PLL1_PLLL;
+}
+
+static inline void ltq_cgu_pll1_restart(unsigned m, unsigned n)
+{
+ u32 pll1_cfg;
+
+ ltq_clrbits(&ltq_cgu_regs->pll1_cfg, LTQ_CGU_PLL1_PLL_EN);
+ ltq_setbits(&ltq_cgu_regs->update, LTQ_CGU_UPDATE);
+
+ pll1_cfg = ltq_readl(&ltq_cgu_regs->pll1_cfg);
+ pll1_cfg &= ~(LTQ_CGU_PLL1_PLLN_MASK | LTQ_CGU_PLL1_PLLM_MASK);
+ pll1_cfg |= n << LTQ_CGU_PLL1_PLLN_SHIFT;
+ pll1_cfg |= m << LTQ_CGU_PLL1_PLLM_SHIFT;
+ pll1_cfg |= LTQ_CGU_PLL1_PLL_EN;
+ ltq_writel(&ltq_cgu_regs->pll1_cfg, pll1_cfg);
+ ltq_setbits(&ltq_cgu_regs->update, LTQ_CGU_UPDATE);
+
+ __udelay(1000);
+}
+
+/*
+ * From chapter 9 in errata sheet:
+ *
+ * Under certain condition, the PLL1 may failed to enter into lock
+ * status by hardware default N, M setting.
+ *
+ * Since system always starts from PLL0, the system software can run
+ * and re-program the PLL1 settings.
+ */
+static void ltq_cgu_pll1_init(void)
+{
+ unsigned i;
+ const unsigned pll1_m[] = { 1, 2, 3, 4 };
+ const unsigned pll1_n[] = { 21, 32, 43, 54 };
+
+ /* Check if PLL1 has locked with hardware default settings */
+ if (ltq_cgu_pll1_locked())
+ return;
+
+ for (i = 0; i < 4; i++) {
+ ltq_cgu_pll1_restart(pll1_m[i], pll1_n[i]);
+
+ if (ltq_cgu_pll1_locked())
+ goto done;
+ }
+
+done:
+ /* Restart with hardware default values M=5, N=64 */
+ ltq_cgu_pll1_restart(5, 64);
+}
+
+void ltq_pll_init(void)
+{
+ ltq_cgu_pll1_init();
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/cgu_init.S
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/addrspace.h>
+#include <asm/arch/soc.h>
+
+/* RCU module register */
+#define LTQ_RCU_RST_REQ 0x0010 /* Reset request */
+#define LTQ_RCU_RST_REQ_VALUE ((1 << 14) | (1 << 1))
+
+/* CGU module register */
+#define LTQ_CGU_PLL0_CFG 0x0004 /* PLL0 config */
+#define LTQ_CGU_PLL1_CFG 0x0008 /* PLL1 config */
+#define LTQ_CGU_PLL2_CFG 0x0060 /* PLL2 config */
+#define LTQ_CGU_SYS 0x000C /* System clock */
+#define LTQ_CGU_CLK_FSR 0x0010 /* Clock frequency select */
+#define LTQ_CGU_UPDATE 0x0020 /* Clock update control */
+
+/* Valid SYS.CPU values */
+#define LTQ_CGU_SYS_CPU_SHIFT 4
+#define LTQ_CGU_SYS_CPU_600_MHZ 0x0
+#define LTQ_CGU_SYS_CPU_500_MHZ 0x1
+#define LTQ_CGU_SYS_CPU_393_MHZ 0x2
+#define LTQ_CGU_SYS_CPU_333_MHZ 0x3
+#define LTQ_CGU_SYS_CPU_197_MHZ 0x5
+#define LTQ_CGU_SYS_CPU_166_MHZ 0x7
+#define LTQ_CGU_SYS_CPU_125_MHZ 0x9
+
+/* Valid SYS.OCP values */
+#define LTQ_CGU_SYS_OCP_SHIFT 0
+#define LTQ_CGU_SYS_OCP_1 0x0
+#define LTQ_CGU_SYS_OCP_2 0x2
+#define LTQ_CGU_SYS_OCP_2_5 0x3
+#define LTQ_CGU_SYS_OCP_3 0x4
+
+/* Valid CLK_FSR.ETH values */
+#define LTQ_CGU_CLK_FSR_ETH_SHIFT 24
+#define LTQ_CGU_CLK_FSR_ETH_50_MHZ 0x0
+#define LTQ_CGU_CLK_FSR_ETH_25_MHZ 0x1
+#define LTQ_CGU_CLK_FSR_ETH_2_5_MHZ 0x2
+#define LTQ_CGU_CLK_FSR_ETH_125_MHZ 0x3
+
+/* Valid CLK_FSR.PPE values */
+#define LTQ_CGU_CLK_FSR_PPE_SHIFT 16
+#define LTQ_CGU_CLK_FSR_PPE_500_MHZ 0x0 /* Overclock frequency */
+#define LTQ_CGU_CLK_FSR_PPE_450_MHZ 0x1 /* High frequency */
+#define LTQ_CGU_CLK_FSR_PPE_400_MHZ 0x2 /* Low frequency */
+
+#if (CONFIG_SYS_CLOCK_MODE == LTQ_CLK_CPU_500_DDR_250)
+#define LTQ_CGU_SYS_CPU_CONFIG LTQ_CGU_SYS_CPU_500_MHZ
+#define LTQ_CGU_SYS_OCP_CONFIG LTQ_CGU_SYS_OCP_2
+#define LTQ_CGU_CLK_FSR_ETH_CONFIG LTQ_CGU_CLK_FSR_ETH_125_MHZ
+#define LTQ_CGU_CLK_FSR_PPE_CONFIG LTQ_CGU_CLK_FSR_PPE_450_MHZ
+#else
+#error "Invalid system clock configuration!"
+#endif
+
+/* Build register values */
+#define LTQ_CGU_SYS_VALUE ((LTQ_CGU_SYS_CPU_CONFIG << \
+ LTQ_CGU_SYS_CPU_SHIFT) | \
+ LTQ_CGU_SYS_OCP_CONFIG)
+
+#define LTQ_CGU_CLK_FSR_VALUE ((LTQ_CGU_CLK_FSR_ETH_CONFIG << \
+ LTQ_CGU_CLK_FSR_ETH_SHIFT) | \
+ (LTQ_CGU_CLK_FSR_PPE_CONFIG << \
+ LTQ_CGU_CLK_FSR_PPE_SHIFT))
+
+ .set noreorder
+
+LEAF(ltq_cgu_init)
+ /* Load current CGU register values */
+ li t0, (LTQ_CGU_BASE | KSEG1)
+ lw t1, LTQ_CGU_SYS(t0)
+ lw t2, LTQ_CGU_CLK_FSR(t0)
+
+ /* Load target CGU register values */
+ li t3, LTQ_CGU_SYS_VALUE
+ li t4, LTQ_CGU_CLK_FSR_VALUE
+
+ /* Only update registers if values differ */
+ bne t1, t3, update
+ nop
+ beq t2, t4, finished
+ nop
+
+update:
+ /* Store target register values */
+ sw t3, LTQ_CGU_SYS(t0)
+ sw t4, LTQ_CGU_CLK_FSR(t0)
+
+ /* Perform software reset to activate new clock config */
+#if 0
+ li t0, (LTQ_RCU_BASE | KSEG1)
+ lw t1, LTQ_RCU_RST_REQ(t0)
+ or t1, LTQ_RCU_RST_REQ_VALUE
+ sw t1, LTQ_RCU_RST_REQ(t0)
+#else
+ li t1, 1
+ sw t1, LTQ_CGU_UPDATE(t0)
+#endif
+
+#if 0
+wait_reset:
+ b wait_reset
+ nop
+#endif
+
+finished:
+ jr ra
+ nop
+
+ END(ltq_cgu_init)
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/chipid.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/chipid.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_CHIPID_VERSION_SHIFT 28
+#define LTQ_CHIPID_VERSION_MASK (0x7 << LTQ_CHIPID_VERSION_SHIFT)
+#define LTQ_CHIPID_PNUM_SHIFT 12
+#define LTQ_CHIPID_PNUM_MASK (0xFFFF << LTQ_CHIPID_PNUM_SHIFT)
+
+struct ltq_chipid_regs {
+ u32 manid; /* Manufacturer identification */
+ u32 chipid; /* Chip identification */
+};
+
+static struct ltq_chipid_regs *ltq_chipid_regs =
+ (struct ltq_chipid_regs *) CKSEG1ADDR(LTQ_CHIPID_BASE);
+
+unsigned int ltq_chip_version_get(void)
+{
+ u32 chipid;
+
+ chipid = ltq_readl(&ltq_chipid_regs->chipid);
+
+ return (chipid & LTQ_CHIPID_VERSION_MASK) >> LTQ_CHIPID_VERSION_SHIFT;
+}
+
+unsigned int ltq_chip_partnum_get(void)
+{
+ u32 chipid;
+
+ chipid = ltq_readl(&ltq_chipid_regs->chipid);
+
+ return (chipid & LTQ_CHIPID_PNUM_MASK) >> LTQ_CHIPID_PNUM_SHIFT;
+}
+
+const char *ltq_chip_partnum_str(void)
+{
+ enum ltq_chip_partnum partnum = ltq_chip_partnum_get();
+
+ switch (partnum) {
+ case LTQ_SOC_VRX268:
+ case LTQ_SOC_VRX268_2:
+ return "VRX268";
+ case LTQ_SOC_VRX288:
+ case LTQ_SOC_VRX288_2:
+ return "VRX288";
+ case LTQ_SOC_GRX288:
+ case LTQ_SOC_GRX288_2:
+ return "GRX288";
+ default:
+ printf("Unknown partnum: %x\n", partnum);
+ }
+
+ return "";
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PF_CPPFLAGS_XRX := $(call cc-option,-mtune=34kc,)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_XRX)
+
+ifdef CONFIG_SPL_BUILD
+PF_ABICALLS := -mno-abicalls
+PF_PIC := -fno-pic
+PF_PIE :=
+USE_PRIVATE_LIBGCC := yes
+endif
+
+LIBS-y += $(CPUDIR)/lantiq-common/liblantiq-common.o
+
+ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_SYS_BOOT_SFSPL
+ALL-y += $(obj)u-boot.ltq.sfspl
+ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.sfspl
+ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.sfspl
+endif
+ifdef CONFIG_SYS_BOOT_NORSPL
+ALL-y += $(obj)u-boot.ltq.norspl
+ALL-$(CONFIG_SPL_LZO_SUPPORT) += $(obj)u-boot.ltq.lzo.norspl
+ALL-$(CONFIG_SPL_LZMA_SUPPORT) += $(obj)u-boot.ltq.lzma.norspl
+endif
+endif
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/dcdc.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/io.h>
+
+#define LTQ_DCDC_CLK_SET0_CLK_SEL_P (1 << 6)
+#define LTQ_DCDC_CLK_SET1_SEL_DIV25 (1 << 5)
+#define LTQ_DCDC_CONF_TEST_DIG_PID_FREEZE (1 << 5)
+
+struct ltq_dcdc_regs {
+ u8 b0_coeh; /* Coefficient b0 */
+ u8 b0_coel; /* Coefficient b0 */
+ u8 b1_coeh; /* Coefficient b1 */
+ u8 b1_coel; /* Coefficient b1 */
+ u8 b2_coeh; /* Coefficient b2 */
+ u8 b2_coel; /* Coefficient b2 */
+ u8 clk_set0; /* Clock setup */
+ u8 clk_set1; /* Clock setup */
+ u8 pwm_confh; /* Configure PWM */
+ u8 pwm_confl; /* Configure PWM */
+ u8 bias_vreg0; /* Bias and regulator setup */
+ u8 bias_vreg1; /* Bias and regulator setup */
+ u8 adc_gen0; /* ADC and general control */
+ u8 adc_gen1; /* ADC and general control */
+ u8 adc_con0; /* ADC and general config */
+ u8 adc_con1; /* ADC and general config */
+ u8 conf_test_ana; /* not documented */
+ u8 conf_test_dig; /* not documented */
+ u8 dcdc_status; /* not documented */
+ u8 pid_status; /* not documented */
+ u8 duty_cycle; /* not documented */
+ u8 non_ov_delay; /* not documented */
+ u8 analog_gain; /* not documented */
+ u8 duty_cycle_max_sat; /* not documented */
+ u8 duty_cycle_min_sat; /* not documented */
+ u8 duty_cycle_max; /* not documented */
+ u8 duty_cycle_min; /* not documented */
+ u8 error_max; /* not documented */
+ u8 error_read; /* not documented */
+ u8 delay_deglitch; /* not documented */
+ u8 latch_control; /* not documented */
+ u8 rsvd[240];
+ u8 osc_conf; /* OSC general config */
+ u8 osc_stat; /* OSC general status */
+};
+
+static struct ltq_dcdc_regs *ltq_dcdc_regs =
+ (struct ltq_dcdc_regs *) CKSEG1ADDR(LTQ_DCDC_BASE);
+
+void ltq_dcdc_init(unsigned int dig_ref)
+{
+ u8 dig_ref_cur, val;
+
+ /* Set duty cycle max sat. to 70/90, enable PID freeze */
+ ltq_writeb(&ltq_dcdc_regs->duty_cycle_max_sat, 0x5A);
+ ltq_writeb(&ltq_dcdc_regs->duty_cycle_min_sat, 0x46);
+ val = ltq_readb(&ltq_dcdc_regs->conf_test_dig);
+ val |= LTQ_DCDC_CONF_TEST_DIG_PID_FREEZE;
+ ltq_writeb(&ltq_dcdc_regs->conf_test_dig, val);
+
+ /* Program new coefficients */
+ ltq_writeb(&ltq_dcdc_regs->b0_coeh, 0x00);
+ ltq_writeb(&ltq_dcdc_regs->b0_coel, 0x00);
+ ltq_writeb(&ltq_dcdc_regs->b1_coeh, 0xFF);
+ ltq_writeb(&ltq_dcdc_regs->b1_coel, 0xE6);
+ ltq_writeb(&ltq_dcdc_regs->b2_coeh, 0x00);
+ ltq_writeb(&ltq_dcdc_regs->b2_coel, 0x1B);
+ ltq_writeb(&ltq_dcdc_regs->non_ov_delay, 0x8B);
+
+ /* Set duty cycle max sat. to 60/108, disable PID freeze */
+ ltq_writeb(&ltq_dcdc_regs->duty_cycle_max_sat, 0x6C);
+ ltq_writeb(&ltq_dcdc_regs->duty_cycle_min_sat, 0x3C);
+ val = ltq_readb(&ltq_dcdc_regs->conf_test_dig);
+ val &= ~LTQ_DCDC_CONF_TEST_DIG_PID_FREEZE;
+ ltq_writeb(&ltq_dcdc_regs->conf_test_dig, val);
+
+ /* Init clock and DLL settings */
+ val = ltq_readb(&ltq_dcdc_regs->clk_set0);
+ val |= LTQ_DCDC_CLK_SET0_CLK_SEL_P;
+ ltq_writeb(&ltq_dcdc_regs->clk_set0, val);
+ val = ltq_readb(&ltq_dcdc_regs->clk_set1);
+ val |= LTQ_DCDC_CLK_SET1_SEL_DIV25;
+ ltq_writeb(&ltq_dcdc_regs->clk_set1, val);
+ ltq_writeb(&ltq_dcdc_regs->pwm_confh, 0xF9);
+
+ wmb();
+
+ /* Adapt value of digital reference of DCDC converter */
+ dig_ref_cur = ltq_readb(&ltq_dcdc_regs->bias_vreg1);
+
+ while (dig_ref_cur != dig_ref) {
+ if (dig_ref >= dig_ref_cur)
+ dig_ref_cur++;
+ else if (dig_ref < dig_ref_cur)
+ dig_ref_cur--;
+
+ ltq_writeb(&ltq_dcdc_regs->bias_vreg1, dig_ref_cur);
+ __udelay(1000);
+ }
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/ebu.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/io.h>
+
+#define EBU_ADDRSEL_MASK(mask) ((mask & 0xf) << 4)
+#define EBU_ADDRSEL_REGEN (1 << 0)
+
+#define EBU_CON_WRDIS (1 << 31)
+#define EBU_CON_AGEN_DEMUX (0x0 << 24)
+#define EBU_CON_AGEN_MUX (0x2 << 24)
+#define EBU_CON_SETUP (1 << 22)
+#define EBU_CON_WAIT_DIS (0x0 << 20)
+#define EBU_CON_WAIT_ASYNC (0x1 << 20)
+#define EBU_CON_WAIT_SYNC (0x2 << 20)
+#define EBU_CON_WINV (1 << 19)
+#define EBU_CON_PW_8BIT (0x0 << 16)
+#define EBU_CON_PW_16BIT (0x1 << 16)
+#define EBU_CON_ALEC(cycles) ((cycles & 0x3) << 14)
+#define EBU_CON_BCGEN_CS (0x0 << 12)
+#define EBU_CON_BCGEN_INTEL (0x1 << 12)
+#define EBU_CON_BCGEN_MOTOROLA (0x2 << 12)
+#define EBU_CON_WAITWRC(cycles) ((cycles & 0x7) << 8)
+#define EBU_CON_WAITRDC(cycles) ((cycles & 0x3) << 6)
+#define EBU_CON_HOLDC(cycles) ((cycles & 0x3) << 4)
+#define EBU_CON_RECOVC(cycles) ((cycles & 0x3) << 2)
+#define EBU_CON_CMULT_1 0x0
+#define EBU_CON_CMULT_4 0x1
+#define EBU_CON_CMULT_8 0x2
+#define EBU_CON_CMULT_16 0x3
+
+#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
+#define ebu_region0_enable 1
+#else
+#define ebu_region0_enable 0
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
+#define ebu_region1_enable 1
+#else
+#define ebu_region1_enable 0
+#endif
+
+struct ltq_ebu_regs {
+ u32 clc;
+ u32 rsvd0;
+ u32 id;
+ u32 rsvd1;
+ u32 con;
+ u32 rsvd2[3];
+ u32 addr_sel_0;
+ u32 addr_sel_1;
+ u32 addr_sel_2;
+ u32 addr_sel_3;
+ u32 rsvd3[12];
+ u32 con_0;
+ u32 con_1;
+ u32 con_2;
+ u32 con_3;
+};
+
+static struct ltq_ebu_regs *ltq_ebu_regs =
+ (struct ltq_ebu_regs *) CKSEG1ADDR(LTQ_EBU_BASE);
+
+void ltq_ebu_init(void)
+{
+ if (ebu_region0_enable) {
+ /*
+ * Map EBU region 0 to range 0x10000000-0x13ffffff and enable
+ * region control. This supports up to 32 MiB NOR flash in
+ * bank 0.
+ */
+ ltq_writel(&ltq_ebu_regs->addr_sel_0, LTQ_EBU_REGION0_BASE |
+ EBU_ADDRSEL_MASK(1) | EBU_ADDRSEL_REGEN);
+
+ ltq_writel(&ltq_ebu_regs->con_0, EBU_CON_AGEN_DEMUX |
+ EBU_CON_WAIT_DIS | EBU_CON_PW_16BIT |
+ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
+ EBU_CON_WAITWRC(7) | EBU_CON_WAITRDC(3) |
+ EBU_CON_HOLDC(3) | EBU_CON_RECOVC(3) |
+ EBU_CON_CMULT_16);
+ } else
+ ltq_clrbits(&ltq_ebu_regs->addr_sel_0, EBU_ADDRSEL_REGEN);
+
+ if (ebu_region1_enable) {
+ /*
+ * Map EBU region 1 to range 0x14000000-0x13ffffff and enable
+ * region control. This supports NAND flash in bank 1.
+ */
+ ltq_writel(&ltq_ebu_regs->addr_sel_1, LTQ_EBU_REGION1_BASE |
+ EBU_ADDRSEL_MASK(3) | EBU_ADDRSEL_REGEN);
+
+ ltq_writel(&ltq_ebu_regs->con_1, EBU_CON_AGEN_DEMUX |
+ EBU_CON_SETUP | EBU_CON_WAIT_DIS | EBU_CON_PW_8BIT |
+ EBU_CON_ALEC(3) | EBU_CON_BCGEN_INTEL |
+ EBU_CON_WAITWRC(2) | EBU_CON_WAITRDC(2) |
+ EBU_CON_HOLDC(1) | EBU_CON_RECOVC(1) |
+ EBU_CON_CMULT_4);
+ } else
+ ltq_clrbits(&ltq_ebu_regs->addr_sel_1, EBU_ADDRSEL_REGEN);
+}
+
+void *flash_swap_addr(unsigned long addr)
+{
+ return (void *)(addr ^ 2);
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/gphy.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/gphy.h>
+
+static inline void ltq_gphy_copy(const void *fw_start, const void *fw_end,
+ ulong dst_addr)
+{
+ const ulong fw_len = (ulong) fw_end - (ulong) fw_start;
+ const ulong addr = CKSEG1ADDR(dst_addr);
+
+ debug("ltq_gphy_copy: addr %08lx, fw_start %p, fw_end %p\n",
+ addr, fw_start, fw_end);
+
+ memcpy((void *) addr, fw_start, fw_len);
+}
+
+void ltq_gphy_phy11g_a1x_load(ulong addr)
+{
+ extern ulong __ltq_fw_phy11g_a1x_start;
+ extern ulong __ltq_fw_phy11g_a1x_end;
+
+ ltq_gphy_copy(&__ltq_fw_phy11g_a1x_start, &__ltq_fw_phy11g_a1x_end,
+ addr);
+}
+
+void ltq_gphy_phy11g_a2x_load(ulong addr)
+{
+ extern ulong __ltq_fw_phy11g_a2x_start;
+ extern ulong __ltq_fw_phy11g_a2x_end;
+
+ ltq_gphy_copy(&__ltq_fw_phy11g_a2x_start, &__ltq_fw_phy11g_a2x_end,
+ addr);
+}
+
+void ltq_gphy_phy22f_a1x_load(ulong addr)
+{
+ extern ulong __ltq_fw_phy22f_a1x_start;
+ extern ulong __ltq_fw_phy22f_a1x_end;
+
+ ltq_gphy_copy(&__ltq_fw_phy22f_a1x_start, &__ltq_fw_phy22f_a1x_end,
+ addr);
+}
+
+void ltq_gphy_phy22f_a2x_load(ulong addr)
+{
+ extern ulong __ltq_fw_phy22f_a2x_start;
+ extern ulong __ltq_fw_phy22f_a2x_end;
+
+ ltq_gphy_copy(&__ltq_fw_phy22f_a2x_start, &__ltq_fw_phy22f_a2x_end,
+ addr);
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/gphy_fw.S
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/asm.h>
+
+ .section .rodata.__ltq_fw_phy11g_a1x
+EXPORT(__ltq_fw_phy11g_a1x_start)
+ .incbin "fw_phy11g_a1x.blob"
+EXPORT(__ltq_fw_phy11g_a1x_end)
+
+ .section .rodata.__ltq_fw_phy11g_a2x
+EXPORT(__ltq_fw_phy11g_a2x_start)
+ .incbin "fw_phy11g_a2x.blob"
+EXPORT(__ltq_fw_phy11g_a2x_end)
+
+ .section .rodata.__ltq_fw_phy22f_a1x
+EXPORT(__ltq_fw_phy22f_a1x_start)
+ .incbin "fw_phy22f_a1x.blob"
+EXPORT(__ltq_fw_phy22f_a1x_end)
+
+ .section .rodata.__ltq_fw_phy22f_a2x
+EXPORT(__ltq_fw_phy22f_a2x_start)
+ .incbin "fw_phy22f_a2x.blob"
+EXPORT(__ltq_fw_phy22f_a2x_end)
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/mem.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/io.h>
+
+#define LTQ_CCR03_EIGHT_BANK_MODE (1 << 0)
+#define LTQ_CCR08_CS_MAP_SHIFT 24
+#define LTQ_CCR08_CS_MAP_MASK (0x3 << LTQ_CCR08_CS_MAP_SHIFT)
+#define LTQ_CCR11_COLUMN_SIZE_SHIFT 24
+#define LTQ_CCR11_COLUMN_SIZE_MASK (0x7 << LTQ_CCR11_COLUMN_SIZE_SHIFT)
+#define LTQ_CCR11_ADDR_PINS_MASK 0x7
+#define LTQ_CCR15_MAX_COL_REG_SHIFT 24
+#define LTQ_CCR15_MAX_COL_REG_MASK (0xF << LTQ_CCR15_MAX_COL_REG_SHIFT)
+#define LTQ_CCR16_MAX_ROW_REG_MASK 0xF
+
+static void *ltq_mc_ddr_base = (void *) CKSEG1ADDR(LTQ_MC_DDR_BASE);
+
+static inline u32 ltq_mc_ccr_read(u32 index)
+{
+ return ltq_readl(ltq_mc_ddr_base + LTQ_MC_DDR_CCR_OFFSET(index));
+}
+
+phys_size_t initdram(int board_type)
+{
+ u32 max_col_reg, max_row_reg, column_size, addr_pins;
+ u32 banks, cs_map;
+ phys_size_t size;
+
+ banks = (ltq_mc_ccr_read(3) & LTQ_CCR03_EIGHT_BANK_MODE) ? 8 : 4;
+
+ cs_map = (ltq_mc_ccr_read(8) & LTQ_CCR08_CS_MAP_MASK) >>
+ LTQ_CCR08_CS_MAP_SHIFT;
+
+ column_size = (ltq_mc_ccr_read(11) & LTQ_CCR11_COLUMN_SIZE_MASK) >>
+ LTQ_CCR11_COLUMN_SIZE_SHIFT;
+
+ addr_pins = ltq_mc_ccr_read(11) & LTQ_CCR11_ADDR_PINS_MASK;
+
+ max_col_reg = (ltq_mc_ccr_read(15) & LTQ_CCR15_MAX_COL_REG_MASK) >>
+ LTQ_CCR15_MAX_COL_REG_SHIFT;
+
+ max_row_reg = ltq_mc_ccr_read(16) & LTQ_CCR16_MAX_ROW_REG_MASK;
+
+ /*
+ * size (bytes) = 2 ^ rowsize * 2 ^ colsize * banks * chipselects
+ * * datawidth (bytes)
+ */
+ size = (2 << (max_col_reg - column_size - 1)) *
+ (2 << (max_row_reg - addr_pins - 1)) * banks * cs_map * 2;
+
+ return size;
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/mem_init.S
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/addrspace.h>
+#include <asm/arch/soc.h>
+
+/* Must be configured in BOARDDIR */
+#include <ddr_settings.h>
+
+#define LTQ_MC_DDR_START (1 << 8)
+#define LTQ_MC_DDR_DLL_LOCK_IND 1
+
+#define CCS_ALWAYS_LAST 0x0430
+#define CCS_AHBM_CR_BURST_EN (1 << 2)
+#define CCS_FPIM_CR_BURST_EN (1 << 1)
+
+#define CCR03_EIGHT_BANK_MODE (1 << 0)
+
+ /* Store given value in MC DDR CCRx register */
+ .macro ccr_sw num, val
+ li t1, \val
+ sw t1, LTQ_MC_DDR_CCR_OFFSET(\num)(t0)
+ .endm
+
+LEAF(ltq_mem_init)
+ /* Load MC DDR module base */
+ li t0, (LTQ_MC_DDR_BASE | KSEG1)
+
+ /* Put memory controller in inactive mode */
+ sw zero, LTQ_MC_DDR_CCR_OFFSET(7)(t0)
+
+ /* Init MC DDR CCR registers with values from ddr_settings.h */
+ ccr_sw 0, MC_CCR00_VALUE
+ ccr_sw 1, MC_CCR01_VALUE
+ ccr_sw 2, MC_CCR02_VALUE
+ ccr_sw 3, MC_CCR03_VALUE
+ ccr_sw 4, MC_CCR04_VALUE
+ ccr_sw 5, MC_CCR05_VALUE
+ ccr_sw 6, MC_CCR06_VALUE
+ ccr_sw 7, MC_CCR07_VALUE
+ ccr_sw 8, MC_CCR08_VALUE
+ ccr_sw 9, MC_CCR09_VALUE
+
+ ccr_sw 10, MC_CCR10_VALUE
+ ccr_sw 11, MC_CCR11_VALUE
+ ccr_sw 12, MC_CCR12_VALUE
+ ccr_sw 13, MC_CCR13_VALUE
+ ccr_sw 14, MC_CCR14_VALUE
+ ccr_sw 15, MC_CCR15_VALUE
+ ccr_sw 16, MC_CCR16_VALUE
+ ccr_sw 17, MC_CCR17_VALUE
+ ccr_sw 18, MC_CCR18_VALUE
+ ccr_sw 19, MC_CCR19_VALUE
+
+ ccr_sw 20, MC_CCR20_VALUE
+ ccr_sw 21, MC_CCR21_VALUE
+ ccr_sw 22, MC_CCR22_VALUE
+ ccr_sw 23, MC_CCR23_VALUE
+ ccr_sw 24, MC_CCR24_VALUE
+ ccr_sw 25, MC_CCR25_VALUE
+ ccr_sw 26, MC_CCR26_VALUE
+ ccr_sw 27, MC_CCR27_VALUE
+ ccr_sw 28, MC_CCR28_VALUE
+ ccr_sw 29, MC_CCR29_VALUE
+
+ ccr_sw 30, MC_CCR30_VALUE
+ ccr_sw 31, MC_CCR31_VALUE
+ ccr_sw 32, MC_CCR32_VALUE
+ ccr_sw 33, MC_CCR33_VALUE
+ ccr_sw 34, MC_CCR34_VALUE
+ ccr_sw 35, MC_CCR35_VALUE
+ ccr_sw 36, MC_CCR36_VALUE
+ ccr_sw 37, MC_CCR37_VALUE
+ ccr_sw 38, MC_CCR38_VALUE
+ ccr_sw 39, MC_CCR39_VALUE
+
+ ccr_sw 40, MC_CCR40_VALUE
+ ccr_sw 41, MC_CCR41_VALUE
+ ccr_sw 42, MC_CCR42_VALUE
+ ccr_sw 43, MC_CCR43_VALUE
+ ccr_sw 44, MC_CCR44_VALUE
+ ccr_sw 45, MC_CCR45_VALUE
+ ccr_sw 46, MC_CCR46_VALUE
+
+ ccr_sw 52, MC_CCR52_VALUE
+ ccr_sw 53, MC_CCR53_VALUE
+ ccr_sw 54, MC_CCR54_VALUE
+ ccr_sw 55, MC_CCR55_VALUE
+ ccr_sw 56, MC_CCR56_VALUE
+ ccr_sw 57, MC_CCR57_VALUE
+ ccr_sw 58, MC_CCR58_VALUE
+ ccr_sw 59, MC_CCR59_VALUE
+
+ ccr_sw 60, MC_CCR60_VALUE
+ ccr_sw 61, MC_CCR61_VALUE
+
+ /* Disable bursts between FPI Master bus and XBAR bus */
+ li t4, (LTQ_MC_GLOBAL_BASE | KSEG1)
+ li t5, CCS_AHBM_CR_BURST_EN
+ sw t5, CCS_ALWAYS_LAST(t4)
+
+ /* Init abort condition for DRAM probe */
+ move t4, zero
+
+ /*
+ * Put memory controller in active mode and start initialitation
+ * sequence for connected DDR-SDRAM device
+ */
+mc_start:
+ lw t1, LTQ_MC_DDR_CCR_OFFSET(7)(t0)
+ li t2, LTQ_MC_DDR_START
+ or t1, t1, t2
+ sw t1, LTQ_MC_DDR_CCR_OFFSET(7)(t0)
+
+ /*
+ * Wait until DLL has locked and core is ready for data transfers.
+ * DLL lock indication is in register CCR47 and CCR48
+ */
+wait_ready:
+ li t1, LTQ_MC_DDR_DLL_LOCK_IND
+ lw t2, LTQ_MC_DDR_CCR_OFFSET(47)(t0)
+ and t2, t2, t1
+ bne t1, t2, wait_ready
+
+ lw t2, LTQ_MC_DDR_CCR_OFFSET(48)(t0)
+ and t2, t2, t1
+ bne t1, t2, wait_ready
+
+#ifdef CONFIG_SYS_DRAM_PROBE
+dram_probe:
+ /* Initialization is finished after the second MC start */
+ bnez t4, mc_finished
+
+ /*
+ * Preload register values for CCR03 and CCR11. Initial settings
+ * are 8-bank mode enabled, 14 use address row bits, 10 used
+ * column address bits.
+ */
+ li t1, CONFIG_SYS_SDRAM_BASE_UC
+ li t5, MC_CCR03_VALUE
+ li t6, MC_CCR11_VALUE
+ addi t4, t4, 1
+
+ /*
+ * Store test values to DRAM at offsets 0 and 2^13 (bit 2 in bank select
+ * address BA[3]) and read back the value at offset 0. If the resulting
+ * value is equal to 1 we can skip to the next test. Otherwise
+ * the 8-bank mode does not work with the current DRAM device,
+ * thus we need to clear the according bit in register CCR03.
+ */
+ li t2, 1
+ sw t2, 0x0(t1)
+ li t3, (1 << 13)
+ add t3, t3, t1
+ sw zero, 0(t3)
+ lw t3, 0(t1)
+ bnez t3, row_col_test
+
+ /* Clear CCR03.EIGHT_BANK_MODE */
+ li t3, ~CCR03_EIGHT_BANK_MODE
+ and t5, t5, t3
+
+row_col_test:
+ /*
+ * Store test values to DRAM at offsets 0, 2^27 (bit 13 of row address
+ * RA[14]) and 2^26 (bit 12 of RA[14]). The chosen test values
+ * represent the difference between max. row address bits (14) and used
+ * row address bits. Then the read back value at offset 0 indicates
+ * the useable row address bits with the current DRAM device. This
+ * value must be set in the CCR11 register.
+ */
+ sw zero, 0(t1)
+
+ li t2, 1
+ li t3, (1 << 27)
+ add t3, t3, t1
+ sw t2, 0(t3)
+
+ li t2, 2
+ li t3, (1 << 26)
+ add t3, t3, t1
+ sw t2, 0(t3)
+
+ /* Update CCR11.ADDR_PINS */
+ lw t3, 0(t1)
+ add t6, t6, t3
+
+ /*
+ * Store test values to DRAM at offsets 0, 2^10 (bit 9 of column address
+ * CA[10]) and 2^9 (bit 8 of CA[10]). The chosen test values represent
+ * the difference between max. column address bits (12) and used
+ * column address bits. Then the read back value at offset 0 indicates
+ * the useable column address bits with the current DRAM device. This
+ * value must be set in the CCR11 register.
+ */
+ sw zero, 0(t1)
+
+ li t2, 1
+ li t3, (1 << 10)
+ add t3, t3, t1
+ sw t2, 0(t3)
+
+ li t2, 2
+ li t3, (1 << 9)
+ add t3, t3, t1
+ sw t2, 0(t3)
+
+ /* Update CCR11.COLUMN_SIZE */
+ lw t3, 0(t1)
+ sll t3, t3, 24
+ add t6, t6, t3
+
+ /* Put memory controller in inactive mode */
+ sw zero, LTQ_MC_DDR_CCR_OFFSET(7)(t0)
+
+ /* Update CCR03 and CCR11 and restart memory controller initialiation */
+ sw t5, LTQ_MC_DDR_CCR_OFFSET(3)(t0)
+ sw t6, LTQ_MC_DDR_CCR_OFFSET(11)(t0)
+ b mc_start
+
+mc_finished:
+#endif /* CONFIG_SYS_DRAM_PROBE */
+
+ jr ra
+
+ END(ltq_mem_init)
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/pmu.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/pm.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_PMU_PWDCR_RESERVED ((1 << 13) | (1 << 4))
+
+#define LTQ_PMU_PWDCR_PCIELOC_EN (1 << 31)
+#define LTQ_PMU_PWDCR_GPHY (1 << 30)
+#define LTQ_PMU_PWDCR_PPE_TOP (1 << 29)
+#define LTQ_PMU_PWDCR_SWITCH (1 << 28)
+#define LTQ_PMU_PWDCR_USB1 (1 << 27)
+#define LTQ_PMU_PWDCR_USB1_PHY (1 << 26)
+#define LTQ_PMU_PWDCR_TDM (1 << 25)
+#define LTQ_PMU_PWDCR_PPE_DPLUS (1 << 24)
+#define LTQ_PMU_PWDCR_PPE_DPLUM (1 << 23)
+#define LTQ_PMU_PWDCR_PPE_EMA (1 << 22)
+#define LTQ_PMU_PWDCR_PPE_TC (1 << 21)
+#define LTQ_PMU_PWDCR_DEU (1 << 20)
+#define LTQ_PMU_PWDCR_PPE_SLL01 (1 << 19)
+#define LTQ_PMU_PWDCR_PPE_QSB (1 << 18)
+#define LTQ_PMU_PWDCR_UART1 (1 << 17)
+#define LTQ_PMU_PWDCR_SDIO (1 << 16)
+#define LTQ_PMU_PWDCR_AHBM (1 << 15)
+#define LTQ_PMU_PWDCR_FPIM (1 << 14)
+#define LTQ_PMU_PWDCR_GPTC (1 << 12)
+#define LTQ_PMU_PWDCR_LEDC (1 << 11)
+#define LTQ_PMU_PWDCR_EBU (1 << 10)
+#define LTQ_PMU_PWDCR_DSL (1 << 9)
+#define LTQ_PMU_PWDCR_SPI (1 << 8)
+#define LTQ_PMU_PWDCR_USIF (1 << 7)
+#define LTQ_PMU_PWDCR_USB0 (1 << 6)
+#define LTQ_PMU_PWDCR_DMA (1 << 5)
+#define LTQ_PMU_PWDCR_DFEV1 (1 << 3)
+#define LTQ_PMU_PWDCR_DFEV0 (1 << 2)
+#define LTQ_PMU_PWDCR_FPIS (1 << 1)
+#define LTQ_PMU_PWDCR_USB0_PHY (1 << 0)
+
+struct ltq_pmu_regs {
+ u32 rsvd0[7];
+ u32 pwdcr; /* Power down control */
+ u32 sr; /* Power down status */
+ u32 pwdcr1; /* Power down control 1 */
+ u32 sr1; /* Power down status 1 */
+};
+
+static struct ltq_pmu_regs *ltq_pmu_regs =
+ (struct ltq_pmu_regs *) CKSEG1ADDR(LTQ_PMU_BASE);
+
+u32 ltq_pm_map(enum ltq_pm_modules module)
+{
+ u32 val;
+
+ switch (module) {
+ case LTQ_PM_CORE:
+ val = LTQ_PMU_PWDCR_UART1 | LTQ_PMU_PWDCR_FPIM |
+ LTQ_PMU_PWDCR_LEDC | LTQ_PMU_PWDCR_EBU;
+ break;
+ case LTQ_PM_DMA:
+ val = LTQ_PMU_PWDCR_DMA;
+ break;
+ case LTQ_PM_ETH:
+ val = LTQ_PMU_PWDCR_GPHY | LTQ_PMU_PWDCR_PPE_TOP |
+ LTQ_PMU_PWDCR_SWITCH | LTQ_PMU_PWDCR_PPE_DPLUS |
+ LTQ_PMU_PWDCR_PPE_DPLUM | LTQ_PMU_PWDCR_PPE_EMA |
+ LTQ_PMU_PWDCR_PPE_TC | LTQ_PMU_PWDCR_PPE_SLL01 |
+ LTQ_PMU_PWDCR_PPE_QSB;
+ break;
+ case LTQ_PM_SPI:
+ val = LTQ_PMU_PWDCR_SPI;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+int ltq_pm_enable(enum ltq_pm_modules module)
+{
+ const unsigned long timeout = 1000;
+ unsigned long timebase;
+ u32 sr, val;
+
+ val = ltq_pm_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_clrbits(&ltq_pmu_regs->pwdcr, val);
+
+ timebase = get_timer(0);
+
+ do {
+ sr = ltq_readl(&ltq_pmu_regs->sr);
+ if (~sr & val)
+ return 0;
+ } while (get_timer(timebase) < timeout);
+
+ return 1;
+}
+
+int ltq_pm_disable(enum ltq_pm_modules module)
+{
+ u32 val;
+
+ val = ltq_pm_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_setbits(&ltq_pmu_regs->pwdcr, val);
+
+ return 0;
+}
+
+void ltq_pmu_init(void)
+{
+ u32 set, clr;
+
+ clr = ltq_pm_map(LTQ_PM_CORE);
+ set = ~(LTQ_PMU_PWDCR_RESERVED | clr);
+
+ ltq_clrsetbits(&ltq_pmu_regs->pwdcr, clr, set);
+}
--- /dev/null
+++ b/arch/mips/cpu/mips32/vrx200/rcu.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/cpu.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_RCU_RD_GPHY0 (1 << 31) /* GPHY0 */
+#define LTQ_RCU_RD_SRST (1 << 30) /* Global SW Reset */
+#define LTQ_RCU_RD_GPHY1 (1 << 29) /* GPHY1 */
+#define LTQ_RCU_RD_ENMIP2 (1 << 28) /* Enable NMI of PLL2 */
+#define LTQ_RCU_RD_REG25_PD (1 << 26) /* Power down 2.5V regulator */
+#define LTQ_RCU_RD_ENDINIT (1 << 25) /* FPI slave bus access */
+#define LTQ_RCU_RD_PPE_ATM_TC (1 << 23) /* PPE ATM TC */
+#define LTQ_RCU_RD_PCIE (1 << 22) /* PCI-E core */
+#define LTQ_RCU_RD_ETHSW (1 << 21) /* Ethernet switch */
+#define LTQ_RCU_RD_DSP_DEN (1 << 20) /* Enable DSP JTAG */
+#define LTQ_RCU_RD_TDM (1 << 19) /* TDM module interface */
+#define LTQ_RCU_RD_ENMIP1 (1 << 18) /* Enable NMI of PLL1 */
+#define LTQ_RCU_RD_SWBCK (1 << 17) /* Switch backward compat */
+#define LTQ_RCU_RD_HSNAND (1 << 16) /* HSNAND controller */
+#define LTQ_RCU_RD_ENMIP0 (1 << 15) /* Enable NMI of PLL0 */
+#define LTQ_RCU_RD_MC (1 << 14) /* Memory Controller */
+#define LTQ_RCU_RD_PCI (1 << 13) /* PCI core */
+#define LTQ_RCU_RD_PCIE_PHY (1 << 12) /* PCI-E Phy */
+#define LTQ_RCU_RD_DFE_CORE (1 << 11) /* DFE core */
+#define LTQ_RCU_RD_SDIO (1 << 10) /* SDIO core */
+#define LTQ_RCU_RD_DMA (1 << 9) /* DMA core */
+#define LTQ_RCU_RD_PPE (1 << 8) /* PPE core */
+#define LTQ_RCU_RD_DFE (1 << 7) /* DFE core */
+#define LTQ_RCU_RD_AHB (1 << 6) /* AHB bus */
+#define LTQ_RCU_RD_HRST_CFG (1 << 5) /* HW reset configuration */
+#define LTQ_RCU_RD_USB (1 << 4) /* USB and Phy core */
+#define LTQ_RCU_RD_PPE_DSP (1 << 3) /* PPE DSP interface */
+#define LTQ_RCU_RD_FPI (1 << 2) /* FPI bus */
+#define LTQ_RCU_RD_CPU (1 << 1) /* CPU subsystem */
+#define LTQ_RCU_RD_HRST (1 << 0) /* HW reset via HRST pin */
+
+#define LTQ_RCU_STAT_BOOT_SHIFT 17
+#define LTQ_RCU_STAT_BOOT_MASK (0xF << LTQ_RCU_STAT_BOOT_SHIFT)
+#define LTQ_RCU_STAT_BOOT_H (1 << 12)
+
+#define LTQ_RCU_GP_STRAP_CLOCKSOURCE (1 << 15)
+
+struct ltq_rcu_regs {
+ u32 rsvd0[4];
+ u32 req; /* Reset request */
+ u32 stat; /* Reset status */
+ u32 usb0_cfg; /* USB0 configure */
+ u32 gp_strap; /* GPIO strapping */
+ u32 gfs_add0; /* GPHY0 firmware base addr */
+ u32 stat2; /* SLIC and USB reset status */
+ u32 pci_rdy; /* PCI boot ready */
+ u32 ppe_conf; /* PPE ethernet config */
+ u32 pcie_phy_con; /* PCIE PHY config/status */
+ u32 usb1_cfg; /* USB1 configure */
+ u32 usb_ana_cfg1a; /* USB analog config 1a */
+ u32 usb_ana_cfg1b; /* USB analog config 1b */
+ u32 rsvd1;
+ u32 gf_mdio_add; /* GPHY0/1 MDIO address */
+ u32 req2; /* SLIC and USB reset request */
+ u32 ahb_endian; /* AHB bus endianess */
+ u32 rsvd2[4];
+ u32 gcc; /* General CPU config */
+ u32 rsvd3;
+ u32 gfs_add1; /* GPHY1 firmware base addr */
+};
+
+static struct ltq_rcu_regs *ltq_rcu_regs =
+ (struct ltq_rcu_regs *) CKSEG1ADDR(LTQ_RCU_BASE);
+
+u32 ltq_reset_map(enum ltq_reset_modules module)
+{
+ u32 val;
+
+ switch (module) {
+ case LTQ_RESET_CORE:
+ case LTQ_RESET_SOFT:
+ val = LTQ_RCU_RD_SRST | LTQ_RCU_RD_CPU | LTQ_RCU_RD_ENMIP2 |
+ LTQ_RCU_RD_GPHY1 | LTQ_RCU_RD_GPHY0;
+ break;
+ case LTQ_RESET_DMA:
+ val = LTQ_RCU_RD_DMA;
+ break;
+ case LTQ_RESET_ETH:
+ val = LTQ_RCU_RD_PPE | LTQ_RCU_RD_ETHSW;
+ break;
+ case LTQ_RESET_PHY:
+ val = LTQ_RCU_RD_GPHY1 | LTQ_RCU_RD_GPHY0;
+ break;
+ case LTQ_RESET_HARD:
+ val = LTQ_RCU_RD_HRST;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ return val;
+}
+
+int ltq_reset_activate(enum ltq_reset_modules module)
+{
+ u32 val;
+
+ val = ltq_reset_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_setbits(&ltq_rcu_regs->req, val);
+
+ return 0;
+}
+
+int ltq_reset_deactivate(enum ltq_reset_modules module)
+{
+ u32 val;
+
+ val = ltq_reset_map(module);
+ if (unlikely(!val))
+ return 1;
+
+ ltq_clrbits(&ltq_rcu_regs->req, val);
+
+ return 0;
+}
+
+enum ltq_boot_select ltq_boot_select(void)
+{
+ u32 stat;
+ unsigned int bootstrap;
+
+ /*
+ * Boot select value is built from bits 20-17 and bit 12.
+ * The bit sequence is read as 4-2-1-0-3.
+ */
+ stat = ltq_readl(&ltq_rcu_regs->stat);
+ bootstrap = ((stat & LTQ_RCU_STAT_BOOT_H) << 4) |
+ ((stat & LTQ_RCU_STAT_BOOT_MASK) >> LTQ_RCU_STAT_BOOT_SHIFT);
+
+ switch (bootstrap) {
+ case 0:
+ return BOOT_NOR_NO_BOOTROM;
+ case 1:
+ return BOOT_RGMII1;
+ case 2:
+ return BOOT_NOR;
+ case 4:
+ return BOOT_UART_NO_EEPROM;
+ case 6:
+ return BOOT_PCI;
+ case 8:
+ return BOOT_UART;
+ case 10:
+ return BOOT_SPI;
+ case 12:
+ return BOOT_NAND;
+ default:
+ return BOOT_UNKNOWN;
+ }
+}
+
+void ltq_rcu_gphy_boot(unsigned int id, ulong addr)
+{
+ u32 module;
+ void *gfs_add;
+
+ switch (id) {
+ case 0:
+ module = LTQ_RCU_RD_GPHY0;
+ gfs_add = &ltq_rcu_regs->gfs_add0;
+ break;
+ case 1:
+ module = LTQ_RCU_RD_GPHY1;
+ gfs_add = &ltq_rcu_regs->gfs_add1;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Stop and reset GPHY */
+ ltq_setbits(&ltq_rcu_regs->req, module);
+
+ /* Configure firmware and boot address */
+ ltq_writel(gfs_add, CPHYSADDR(addr & 0xFFFFC000));
+
+ /* Start GPHY by releasing reset */
+ ltq_clrbits(&ltq_rcu_regs->req, module);
+}
--- /dev/null
+++ b/arch/mips/include/asm/arch-danube/config.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Common board configuration for Lantiq XWAY Danube family
+ *
+ * Use following defines in your board config to enable specific features
+ * and drivers for this SoC:
+ *
+ * CONFIG_LTQ_SUPPORT_UART
+ * - support the Danube ASC/UART interface and console
+ *
+ * CONFIG_LTQ_SUPPORT_NOR_FLASH
+ * - support a parallel NOR flash via the CFI interface in flash bank 0
+ *
+ * CONFIG_LTQ_SUPPORT_ETHERNET
+ * - support the Danube ETOP and MAC interface
+ *
+ * CONFIG_LTQ_SUPPORT_SPI_FLASH
+ * - support the Danube SPI interface and serial flash drivers
+ * - specific SPI flash drivers must be configured separately
+ */
+
+#ifndef __DANUBE_CONFIG_H__
+#define __DANUBE_CONFIG_H__
+
+/* CPU and SoC type */
+#define CONFIG_SOC_LANTIQ
+#define CONFIG_SOC_XWAY_DANUBE
+
+/* Cache configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+#define CONFIG_SYS_DCACHE_SIZE (16 * 1024)
+#define CONFIG_SYS_ICACHE_SIZE (16 * 1024)
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_MIPS_CACHE_EXT_INIT
+
+/*
+ * Supported clock modes
+ * PLL0 clock output is 333 MHz
+ * PLL1 clock output is 262.144 MHz
+ */
+#define LTQ_CLK_CPU_333_DDR_167 0 /* Base PLL0, OCP 2 */
+#define LTQ_CLK_CPU_111_DDR_111 1 /* Base PLL0, OCP 1 */
+
+/* CPU speed */
+#define CONFIG_SYS_CLOCK_MODE LTQ_CLK_CPU_333_DDR_167
+#define CONFIG_SYS_MIPS_TIMER_FREQ 166666667
+#define CONFIG_SYS_HZ 1000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_MEMTEST_START 0x81000000
+#define CONFIG_SYS_MEMTEST_END 0x82000000
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
+#define CONFIG_SYS_INIT_SP_OFFSET 0x4000
+
+/* SRAM */
+#define CONFIG_SYS_SRAM_BASE 0xBE1A0000
+#define CONFIG_SYS_SRAM_SIZE 0x10000
+
+/* ASC/UART driver and console */
+#define CONFIG_LANTIQ_SERIAL
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* GPIO */
+#define CONFIG_LANTIQ_GPIO
+#define CONFIG_LTQ_GPIO_MAX_BANKS 2
+
+/* FLASH driver */
+#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_FLASH_BASE 0xB0000000
+#define CONFIG_FLASH_16BIT
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_FLASH_SHOW_PROGRESS 50
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_CFI_FLASH_USE_WEAK_ADDR_SWAP
+
+#define CONFIG_CMD_FLASH
+#else
+#define CONFIG_SYS_NO_FLASH
+#endif /* CONFIG_NOR_FLASH */
+
+#if defined(CONFIG_LTQ_SUPPORT_SPI_FLASH)
+#define CONFIG_LANTIQ_SPI
+#define CONFIG_SPI_FLASH
+
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
+#define CONFIG_NAND_LANTIQ
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0xB4000000
+
+#define CONFIG_CMD_NAND
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
+#define CONFIG_LANTIQ_DMA
+#define CONFIG_LANTIQ_DANUBE_ETOP
+
+#define CONFIG_PHYLIB
+#define CONFIG_MII
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#endif
+
+#define CONFIG_SPL_MAX_SIZE (32 * 1024)
+#define CONFIG_SPL_BSS_MAX_SIZE (8 * 1024)
+#define CONFIG_SPL_STACK_MAX_SIZE (8 * 1024)
+#define CONFIG_SPL_MALLOC_MAX_SIZE (32 * 1024)
+/*#define CONFIG_SPL_STACK_BSS_IN_SRAM*/
+
+#if defined(CONFIG_SPL_STACK_BSS_IN_SRAM)
+#define CONFIG_SPL_STACK_BASE (CONFIG_SYS_SRAM_BASE + \
+ CONFIG_SPL_MAX_SIZE + \
+ CONFIG_SPL_STACK_MAX_SIZE - 1)
+#define CONFIG_SPL_BSS_BASE (CONFIG_SPL_STACK_BASE + 1)
+#define CONFIG_SPL_MALLOC_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+#else
+#define CONFIG_SPL_STACK_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_SP_OFFSET + \
+ CONFIG_SPL_STACK_MAX_SIZE - 1)
+#define CONFIG_SPL_BSS_BASE (CONFIG_SPL_STACK_BASE + 1)
+#define CONFIG_SPL_MALLOC_BASE (CONFIG_SPL_BSS_BASE + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#endif
+
+#if defined(CONFIG_SYS_BOOT_RAM)
+#define CONFIG_SYS_TEXT_BASE 0xa0100000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_DISABLE_CACHE
+#endif
+
+#if defined(CONFIG_SYS_BOOT_NOR)
+#define CONFIG_SYS_TEXT_BASE 0xB0000000
+#endif
+
+#if defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+#define CONFIG_SPL_TEXT_BASE 0xB0000000
+#endif
+
+#if defined(CONFIG_SYS_BOOT_NOR) || defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x688C688C
+#define CONFIG_XWAY_SWAP_BYTES
+#endif
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#endif /* __DANUBE_CONFIG_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-danube/gpio.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DANUBE_GPIO_H__
+#define __DANUBE_GPIO_H__
+
+#include <asm/lantiq/gpio.h>
+
+#endif /* __DANUBE_GPIO_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-danube/nand.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DANUBE_NAND_H__
+#define __DANUBE_NAND_H__
+
+struct nand_chip;
+int ltq_nand_init(struct nand_chip *nand);
+
+#endif /* __DANUBE_NAND_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-danube/soc.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DANUBE_SOC_H__
+#define __DANUBE_SOC_H__
+
+#define LTQ_ASC0_BASE 0x1E100400
+#define LTQ_SPI_BASE 0x1E100800
+#define LTQ_GPIO_BASE 0x1E100B00
+#define LTQ_SSIO_BASE 0x1E100BB0
+#define LTQ_ASC1_BASE 0x1E100C00
+#define LTQ_DMA_BASE 0x1E104100
+
+#define LTQ_EBU_BASE 0x1E105300
+#define LTQ_EBU_REGION0_BASE 0x10000000
+#define LTQ_EBU_REGION1_BASE 0x14000000
+#define LTQ_EBU_NAND_BASE (LTQ_EBU_BASE + 0xB0)
+
+#define LTQ_PPE_BASE 0x1E180000
+#define LTQ_PPE_ETOP_BASE (LTQ_PPE_BASE + 0x11800)
+#define LTQ_PPE_ENET0_BASE (LTQ_PPE_BASE + 0x11840)
+
+#define LTQ_PMU_BASE 0x1F102000
+#define LTQ_CGU_BASE 0x1F103000
+#define LTQ_MPS_BASE 0x1F107000
+#define LTQ_CHIPID_BASE (LTQ_MPS_BASE + 0x340)
+#define LTQ_RCU_BASE 0x1F203000
+
+#define LTQ_MC_GEN_BASE 0x1F800000
+#define LTQ_MC_SDR_BASE 0x1F800200
+#define LTQ_MC_DDR_BASE 0x1F801000
+#define LTQ_MC_DDR_DC_OFFSET(x) (x * 0x10)
+
+#endif /* __DANUBE_SOC_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/config.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Common board configuration for Lantiq XWAY VRX200 family
+ *
+ * Use following defines in your board config to enable specific features
+ * and drivers for this SoC:
+ *
+ * CONFIG_LTQ_SUPPORT_UART
+ * - support the VRX200 ASC/UART interface and console
+ *
+ * CONFIG_LTQ_SUPPORT_NOR_FLASH
+ * - support a parallel NOR flash via the CFI interface in flash bank 0
+ *
+ * CONFIG_LTQ_SUPPORT_ETHERNET
+ * - support the VRX200 internal switch
+ *
+ * CONFIG_LTQ_SUPPORT_SPI_FLASH
+ * - support the VRX200 SPI interface and serial flash drivers
+ * - specific SPI flash drivers must be configured separately
+ *
+ * CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH
+ * - build a preloader that runs in the internal SRAM and loads
+ * the U-Boot from SPI flash into RAM
+ */
+
+#ifndef __VRX200_CONFIG_H__
+#define __VRX200_CONFIG_H__
+
+/* CPU and SoC type */
+#define CONFIG_SOC_LANTIQ
+#define CONFIG_SOC_XWAY_VRX200
+
+/* Cache configuration */
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+#define CONFIG_SYS_DCACHE_SIZE (32 * 1024)
+#define CONFIG_SYS_ICACHE_SIZE (32 * 1024)
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_MIPS_CACHE_EXT_INIT
+
+/*
+ * Supported clock modes
+ * PLL0 clock output is 1000 MHz
+ * PLL1 clock output is 393.219 MHz
+ */
+#define LTQ_CLK_CPU_600_DDR_300 0 /* Base PLL0, OCP 2 */
+#define LTQ_CLK_CPU_600_DDR_200 1 /* Base PLL0, OCP 3 */
+#define LTQ_CLK_CPU_500_DDR_250 2 /* Base PLL0, OCP 2 */
+#define LTQ_CLK_CPU_500_DDR_200 3 /* Base PLL0, OCP 2.5 */
+#define LTQ_CLK_CPU_333_DDR_167 4 /* Base PLL0, OCP 2 */
+#define LTQ_CLK_CPU_167_DDR_167 5 /* Base PLL0, OCP 1 */
+#define LTQ_CLK_CPU_125_DDR_125 6 /* Base PLL0, OCP 1 */
+#define LTQ_CLK_CPU_393_DDR_197 7 /* Base PLL1, OCP 2 */
+#define LTQ_CLK_CPU_197_DDR_197 8 /* Base PLL1, OCP 1 */
+
+/* CPU speed */
+#define CONFIG_SYS_CLOCK_MODE LTQ_CLK_CPU_500_DDR_250
+#define CONFIG_SYS_MIPS_TIMER_FREQ 250000000
+#define CONFIG_SYS_HZ 1000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_BASE_UC 0xa0000000
+#define CONFIG_SYS_MEMTEST_START 0x81000000
+#define CONFIG_SYS_MEMTEST_END 0x82000000
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
+#define CONFIG_SYS_INIT_SP_OFFSET (32 * 1024)
+
+/* SRAM */
+#define CONFIG_SYS_SRAM_BASE 0xBE220000
+#define CONFIG_SYS_SRAM_SIZE 0x10000
+
+/* ASC/UART driver and console */
+#define CONFIG_LANTIQ_SERIAL
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* GPIO */
+#define CONFIG_LANTIQ_GPIO
+#define CONFIG_LTQ_GPIO_MAX_BANKS 3
+#define CONFIG_LTQ_HAS_GPIO_BANK3
+
+/* FLASH driver */
+#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_FLASH_BASE 0xB0000000
+#define CONFIG_FLASH_16BIT
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_FLASH_SHOW_PROGRESS 50
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_CFI_FLASH_USE_WEAK_ADDR_SWAP
+
+#define CONFIG_CMD_FLASH
+#else
+#define CONFIG_SYS_NO_FLASH
+#endif /* CONFIG_NOR_FLASH */
+
+#if defined(CONFIG_LTQ_SUPPORT_SPI_FLASH)
+#define CONFIG_LANTIQ_SPI
+#define CONFIG_SPI_FLASH
+
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_NAND_FLASH)
+#define CONFIG_NAND_LANTIQ
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0xB4000000
+
+#define CONFIG_CMD_NAND
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_ETHERNET)
+#define CONFIG_LANTIQ_DMA
+#define CONFIG_LANTIQ_VRX200_SWITCH
+#define CONFIG_PHY_LANTIQ
+
+#define CONFIG_SYS_RX_ETH_BUFFER 8
+#define CONFIG_PHYLIB
+#define CONFIG_MII
+#define CONFIG_UDP_CHECKSUM
+
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#endif
+
+#define CONFIG_SPL_MAX_SIZE (32 * 1024)
+#define CONFIG_SPL_BSS_MAX_SIZE (8 * 1024)
+#define CONFIG_SPL_STACK_MAX_SIZE (8 * 1024)
+#define CONFIG_SPL_MALLOC_MAX_SIZE (32 * 1024)
+#define CONFIG_SPL_STACK_BSS_IN_SRAM
+
+#if defined(CONFIG_SPL_STACK_BSS_IN_SRAM)
+#define CONFIG_SPL_STACK_BASE (CONFIG_SYS_SRAM_BASE + \
+ CONFIG_SPL_MAX_SIZE + \
+ CONFIG_SPL_STACK_MAX_SIZE - 1)
+#define CONFIG_SPL_BSS_BASE (CONFIG_SPL_STACK_BASE + 1)
+#define CONFIG_SPL_MALLOC_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+#else
+#define CONFIG_SPL_STACK_BASE (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_SP_OFFSET + \
+ CONFIG_SPL_STACK_MAX_SIZE - 1)
+#define CONFIG_SPL_BSS_BASE (CONFIG_SPL_STACK_BASE + 1)
+#define CONFIG_SPL_MALLOC_BASE (CONFIG_SPL_BSS_BASE + \
+ CONFIG_SPL_BSS_MAX_SIZE)
+#endif
+
+#if defined(CONFIG_SYS_BOOT_RAM)
+#define CONFIG_SYS_TEXT_BASE 0xA0100000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_DISABLE_CACHE
+#endif
+
+#if defined(CONFIG_SYS_BOOT_NOR)
+#define CONFIG_SYS_TEXT_BASE 0xB0000000
+#endif
+
+#if defined(CONFIG_SYS_BOOT_SFSPL)
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+#define CONFIG_SPL_TEXT_BASE 0xBE220000
+#endif
+
+#if defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+#define CONFIG_SPL_TEXT_BASE 0xB0000000
+#endif
+
+#if defined(CONFIG_SYS_BOOT_NOR) || defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x688C688C
+#define CONFIG_XWAY_SWAP_BYTES
+#endif
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#endif /* __VRX200_CONFIG_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/gphy.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_GPHY_H__
+#define __VRX200_GPHY_H__
+
+enum ltq_gphy_clk {
+ /* XTAL 36 MHz input */
+ LTQ_GPHY_CLK_36MHZ_XTAL = 1,
+ /* 25 MHz from PLL0 with divider */
+ LTQ_GPHY_CLK_25MHZ_PLL0 = 2,
+ /* derived from PLL2 output (XTAL is 36 MHz) */
+ LTQ_GPHY_CLK_24MHZ_PLL2 = 3,
+ /* 25 MHz Clock from Pin GPIO3 */
+ LTQ_GPHY_CLK_25MHZ_GPIO3 = 4,
+};
+
+/*
+ * Load PHY11G firmware for VRX200 v1.1 to given RAM address
+ *
+ * Address must be 16k aligned!
+ */
+extern void ltq_gphy_phy11g_a1x_load(ulong addr);
+
+/*
+ * Load PHY11G firmware for VRX200 v1.2 to given RAM address
+ *
+ * Address must be 16k aligned!
+ */
+extern void ltq_gphy_phy11g_a2x_load(ulong addr);
+
+/*
+ * Load PHY22F firmware for VRX200 v1.1 to given RAM address
+ *
+ * Address must be 16k aligned!
+ */
+extern void ltq_gphy_phy22f_a1x_load(ulong addr);
+
+/*
+ * Load PHY22F firmware for VRX200 v1.2 to given RAM address
+ *
+ * Address must be 16k aligned!
+ */
+extern void ltq_gphy_phy22f_a2x_load(ulong addr);
+
+/*
+ * Set clock source of internal GPHYs
+ *
+ * According registers resides in CGU address space. Thus this function
+ * is implemented by the CGU driver.
+ */
+extern void ltq_cgu_gphy_clk_src(enum ltq_gphy_clk clk);
+
+/*
+ * Boot internal GPHY with id from given RAM address
+ *
+ * According registers resides in RCU address space. Thus this function
+ * is implemented by the RCU driver.
+ */
+extern void ltq_rcu_gphy_boot(unsigned int id, ulong addr);
+
+#endif /* __VRX200_GPHY_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/gpio.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_GPIO_H__
+#define __VRX200_GPIO_H__
+
+#include <asm/lantiq/gpio.h>
+
+#endif /* __VRX200_GPIO_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/nand.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_NAND_H__
+#define __VRX200_NAND_H__
+
+struct nand_chip;
+int ltq_nand_init(struct nand_chip *nand);
+
+#endif /* __VRX200_NAND_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/soc.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_SOC_H__
+#define __VRX200_SOC_H__
+
+#define LTQ_ASC0_BASE 0x1E100400
+#define LTQ_SPI_BASE 0x1E100800
+#define LTQ_GPIO_BASE 0x1E100B00
+#define LTQ_SSIO_BASE 0x1E100BB0
+#define LTQ_ASC1_BASE 0x1E100C00
+#define LTQ_DMA_BASE 0x1E104100
+
+#define LTQ_EBU_BASE 0x1E105300
+#define LTQ_EBU_REGION0_BASE 0x10000000
+#define LTQ_EBU_REGION1_BASE 0x14000000
+#define LTQ_EBU_NAND_BASE (LTQ_EBU_BASE + 0xB0)
+
+#define LTQ_SWITCH_BASE 0x1E108000
+#define LTQ_SWITCH_CORE_BASE LTQ_SWITCH_BASE
+#define LTQ_SWITCH_TOP_PDI_BASE LTQ_SWITCH_CORE_BASE
+#define LTQ_SWITCH_BM_PDI_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x40)
+#define LTQ_SWITCH_MAC_PDI_0_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x900)
+#define LTQ_SWITCH_MAC_PDI_X_BASE(x) (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30)
+#define LTQ_SWITCH_TOPLEVEL_BASE (LTQ_SWITCH_BASE + 4 * 0xC40)
+#define LTQ_SWITCH_MDIO_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE)
+#define LTQ_SWITCH_MII_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36)
+#define LTQ_SWITCH_PMAC_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82)
+
+#define LTQ_PMU_BASE 0x1F102000
+#define LTQ_CGU_BASE 0x1F103000
+#define LTQ_DCDC_BASE 0x1F106A00
+#define LTQ_MPS_BASE 0x1F107000
+#define LTQ_CHIPID_BASE (LTQ_MPS_BASE + 0x340)
+#define LTQ_RCU_BASE 0x1F203000
+
+#define LTQ_MC_GLOBAL_BASE 0x1F400000
+#define LTQ_MC_DDR_BASE 0x1F401000
+#define LTQ_MC_DDR_CCR_OFFSET(x) (x * 0x10)
+
+#endif /* __VRX200_SOC_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/arch-vrx200/switch.h
@@ -0,0 +1,502 @@
+/*
+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VRX200_SWITCH_H__
+#define __VRX200_SWITCH_H__
+
+/* Switch core registers */
+struct vr9_switch_core_regs {
+ __be32 swres;
+ /* TODO: implement registers */
+ __be32 rsvd0[0x3f];
+};
+
+/* Switch buffer management registers */
+struct vr9_switch_bm_regs {
+ struct bm_core {
+ __be32 ram_val3; /* RAM value 3 */
+ __be32 ram_val2; /* RAM value 2 */
+ __be32 ram_val1; /* RAM value 1 */
+ __be32 ram_val0; /* RAM value 0 */
+ __be32 ram_addr; /* RAM address */
+ __be32 ram_ctrl; /* RAM access control */
+ __be32 fsqm_gctrl; /* Free segment queue global control */
+ __be32 cons_sel; /* Number of consumed segments */
+ __be32 cons_pkt; /* Number of consumed packet pointers */
+ __be32 gctrl; /* Global control */
+ __be32 queue_gctrl; /* Queue manager global control */
+ /* TODO: implement registers */
+ __be32 rsvd0[0x35];
+ } core;
+
+ struct bm_port {
+ __be32 pcfg; /* Port config */
+ __be32 rmon_ctrl; /* RMON control */
+ } port[13];
+
+ __be32 rsvd0[0x66];
+
+ struct bm_queue {
+ __be32 rsvd0;
+ __be32 pqm_rs; /* Packet queue manager rate shape assignment */
+ } queue[32];
+
+ struct bm_shaper {
+ __be32 ctrl; /* Rate shaper control */
+ __be32 cbs; /* Rate shaper committed burst size */
+ __be32 ibs; /* Rate shaper instantaneous burst size */
+ __be32 cir_ext; /* Rate shaper rate exponent */
+ __be32 cir_mant; /* Rate shaper rate mantissa */
+ } shaper[16];
+
+ __be32 rsvd1[0x2a8];
+};
+
+/* Switch parser and classification engine registers */
+struct vr9_switch_pce_regs {
+ struct pce_core {
+ __be32 tbl_key[16]; /* Table key data */
+ __be32 tbl_mask; /* Table mask */
+ __be32 tbl_val[5]; /* Table value */
+ __be32 tbl_addr; /* Table entry address */
+ __be32 tbl_ctrl; /* Table access control */
+ __be32 tbl_stat; /* Table general status */
+ __be32 age_0; /* Aging counter config 0 */
+ __be32 age_1; /* Aging counter config 1 */
+ __be32 pmap_1; /* Port map (monitoring) */
+ __be32 pmap_2; /* Port map (multicast) */
+ __be32 pmap_3; /* Port map (unknown unicast) */
+ __be32 gctrl_0; /* Global control 0 */
+ __be32 gctrl_1; /* Global control 1 */
+ __be32 tcm_gctrl; /* Three-color marker global control */
+ __be32 igmp_ctrl; /* IGMP control */
+ __be32 igmp_drpm; /* IGMP default router port map */
+ __be32 igmp_age_0; /* IGMP aging 0 */
+ __be32 igmp_age_1; /* IGMP aging 1 */
+ __be32 igmp_stat; /* IGMP status */
+ __be32 wol_gctrl; /* Wake-on-LAN control */
+ __be32 wol_da_0; /* Wake-on-LAN destination address 0 */
+ __be32 wol_da_1; /* Wake-on-LAN destination address 1 */
+ __be32 wol_da_2; /* Wake-on-LAN destination address 2 */
+ __be32 wol_pw_0; /* Wake-on-LAN password 0 */
+ __be32 wol_pw_1; /* Wake-on-LAN password 1 */
+ __be32 wol_pw_2; /* Wake-on-LAN password 2 */
+ __be32 ier_0; /* PCE global interrupt enable 0 */
+ __be32 ier_1; /* PCE global interrupt enable 1 */
+ __be32 isr_0; /* PCE global interrupt status 0 */
+ __be32 isr_1; /* PCE global interrupt status 1 */
+ __be32 parser_stat; /* Parser status */
+ __be32 rsvd0[0x6];
+ } core;
+
+ __be32 rsvd0[0x10];
+
+ struct pce_port {
+ __be32 pctrl_0; /* Port control 0 */
+ __be32 pctrl_1; /* Port control 1 */
+ __be32 pctrl_2; /* Port control 2 */
+ __be32 pctrl_3; /* Port control 3 */
+ __be32 wol_ctrl; /* Wake-on-LAN control */
+ __be32 vlan_ctrl; /* VLAN control */
+ __be32 def_pvid; /* Default port VID */
+ __be32 pstat; /* Port status */
+ __be32 pier; /* Interrupt enable */
+ __be32 pisr; /* Interrupt status */
+ } port[13];
+
+ __be32 rsvd1[0x7e];
+
+ struct pce_meter {
+ /* TODO: implement registers */
+ __be32 rsvd0[0x7];
+ } meter[8];
+
+ __be32 rsvd2[0x308];
+};
+
+static inline unsigned int to_pce_tbl_key_id(unsigned int id)
+{
+ BUG_ON(id > 15);
+
+ return 15 - id;
+}
+
+static inline unsigned int to_pce_tbl_value_id(unsigned int id)
+{
+ BUG_ON(id > 4);
+
+ return 4 - id;
+}
+
+/* Switch ethernet MAC registers */
+struct vr9_switch_mac_regs {
+ struct mac_core {
+ __be32 test; /* MAC test */
+ __be32 pfad_cfg; /* Pause frame source address config */
+ __be32 pfsa_0; /* Pause frame source address 0 */
+ __be32 pfsa_1; /* Pause frame source address 1 */
+ __be32 pfsa_2; /* Pause frame source address 2 */
+ __be32 flen; /* Frame length */
+ __be32 vlan_etype_0; /* VLAN ethertype 0 */
+ __be32 vlan_etype_1; /* VLAN ethertype 1 */
+ __be32 ier; /* Interrupt enable */
+ __be32 isr; /* Interrupt status */
+ __be32 rsvd0[0x36];
+ } core;
+
+ struct mac_port {
+ __be32 pstat; /* Port status */
+ __be32 pisr; /* Interrupt status */
+ __be32 pier; /* Interrupt enable */
+ __be32 ctrl_0; /* Control 0 */
+ __be32 ctrl_1; /* Control 1 */
+ __be32 ctrl_2; /* Control 2 */
+ __be32 ctrl_3; /* Control 3 */
+ __be32 ctrl_4; /* Control 4 */
+ __be32 ctrl_5; /* Control 5 */
+ __be32 rsvd0[0x2];
+ __be32 testen; /* Test enable */
+ } port[13];
+
+ __be32 rsvd0[0xa4];
+};
+
+/* Switch Fetch DMA registers */
+struct vr9_switch_fdma_regs {
+ struct fdma_core {
+ __be32 ctrl; /* FDMA control */
+ __be32 stetype; /* Special tag ethertype control */
+ __be32 vtetype; /* VLAN tag ethertype control */
+ __be32 stat; /* FDMA status */
+ __be32 ier; /* FDMA interrupt enable */
+ __be32 isr; /* FDMA interrupt status */
+ } core;
+
+ __be32 rsvd0[0x3a];
+
+ struct fdma_port {
+ __be32 pctrl; /* Port control */
+ __be32 prio; /* Port priority */
+ __be32 pstat_0; /* Port status 0 */
+ __be32 pstat_1; /* Port status 1 */
+ __be32 tstamp_0; /* Egress time stamp 0 */
+ __be32 tstamp_1; /* Egress time stamp 1 */
+ } port[13];
+
+ __be32 rsvd1[0x72];
+};
+
+/* Switch Store DMA registers */
+struct vr9_switch_sdma_regs {
+ struct sdma_core {
+ __be32 ctrl; /* SDMA Control */
+ __be32 fcthr_1; /* Flow control threshold 1 */
+ __be32 rsvd0;
+ __be32 fcthr_3; /* Flow control threshold 3 */
+ __be32 fcthr_4; /* Flow control threshold 4 */
+ __be32 fcthr_5; /* Flow control threshold 5 */
+ __be32 fcthr_6; /* Flow control threshold 6 */
+ __be32 fcthr_7; /* Flow control threshold 7 */
+ __be32 stat_0; /* SDMA status 0 */
+ __be32 stat_1; /* SDMA status 1 */
+ __be32 stat_2; /* SDMA status 2 */
+ __be32 ier; /* SDMA interrupt enable */
+ __be32 isr; /* SDMA interrupt status */
+ } core;
+
+ __be32 rsvd0[0x73];
+
+ struct sdma_port {
+ __be32 pctrl; /* Port control */
+ __be32 prio; /* Port priority */
+ __be32 pstat_0; /* Port status 0 */
+ __be32 pstat_1; /* Port status 1 */
+ __be32 tstamp_0; /* Ingress time stamp 0 */
+ __be32 tstamp_1; /* Ingress time stamp 1 */
+ } port[13];
+
+ __be32 rsvd1[0x32];
+};
+
+/* Switch MDIO control and status registers */
+struct vr9_switch_mdio_regs {
+ __be32 glob_ctrl; /* Global control 0 */
+ __be32 rsvd0[7];
+ __be32 mdio_ctrl; /* MDIO control */
+ __be32 mdio_read; /* MDIO read data */
+ __be32 mdio_write; /* MDIO write data */
+ __be32 mdc_cfg_0; /* MDC clock configuration 0 */
+ __be32 mdc_cfg_1; /* MDC clock configuration 1 */
+ __be32 rsvd1[0x3];
+ __be32 phy_addr[6]; /* PHY address port 5..0 */
+ __be32 mdio_stat[6]; /* MDIO PHY polling status port 0..5 */
+ __be32 aneg_eee[6]; /* EEE auto-neg overrides port 0..5 */
+ __be32 rsvd2[0x14];
+};
+
+static inline unsigned int to_mdio_phyaddr_id(unsigned int id)
+{
+ BUG_ON(id > 5);
+
+ return 5 - id;
+}
+
+/* Switch xMII control registers */
+struct vr9_switch_mii_regs {
+ __be32 mii_cfg0; /* xMII port 0 configuration */
+ __be32 pcdu0; /* Port 0 clock delay configuration */
+ __be32 mii_cfg1; /* xMII port 1 configuration */
+ __be32 pcdu1; /* Port 1 clock delay configuration */
+ __be32 rsvd0[0x6];
+ __be32 mii_cfg5; /* xMII port 5 configuration */
+ __be32 pcdu5; /* Port 5 clock delay configuration */
+ __be32 rsvd1[0x14];
+ __be32 rxb_ctl_0; /* Port 0 receive buffer control */
+ __be32 rxb_ctl_1; /* Port 1 receive buffer control */
+ __be32 rxb_ctl_5; /* Port 5 receive buffer control */
+ __be32 rsvd2[0x28];
+ __be32 dbg_ctl; /* Debug control */
+};
+
+/* Switch Pseudo-MAC registers */
+struct vr9_switch_pmac_regs {
+ __be32 hd_ctl; /* PMAC header control */
+ __be32 tl; /* PMAC type/length */
+ __be32 sa1; /* PMAC source address 1 */
+ __be32 sa2; /* PMAC source address 2 */
+ __be32 sa3; /* PMAC source address 3 */
+ __be32 da1; /* PMAC destination address 1 */
+ __be32 da2; /* PMAC destination address 2 */
+ __be32 da3; /* PMAC destination address 3 */
+ __be32 vlan; /* PMAC VLAN */
+ __be32 rx_ipg; /* PMAC interpacket gap in RX direction */
+ __be32 st_etype; /* PMAC special tag ethertype */
+ __be32 ewan; /* PMAC ethernet WAN group */
+ __be32 ctl; /* PMAC control */
+ __be32 rsvd0[0x2];
+};
+
+struct vr9_switch_regs {
+ struct vr9_switch_core_regs core;
+ struct vr9_switch_bm_regs bm;
+ struct vr9_switch_pce_regs pce;
+ struct vr9_switch_mac_regs mac;
+ struct vr9_switch_fdma_regs fdma;
+ struct vr9_switch_sdma_regs sdma;
+ struct vr9_switch_mdio_regs mdio;
+ struct vr9_switch_mii_regs mii;
+ struct vr9_switch_pmac_regs pmac;
+};
+
+static inline void *to_pce_tbl_key(struct vr9_switch_regs *regs,
+ unsigned int id)
+{
+ return &regs->pce.core.tbl_key[to_pce_tbl_key_id(id)];
+}
+
+static inline void *to_pce_tbl_value(struct vr9_switch_regs *regs,
+ unsigned int id)
+{
+ return &regs->pce.core.tbl_val[to_pce_tbl_value_id(id)];
+}
+
+static inline void *to_mac_ctrl(struct vr9_switch_regs *regs,
+ unsigned int id, unsigned int ctrl)
+{
+ struct mac_port *mac = &regs->mac.port[id];
+
+ switch (ctrl) {
+ case 0:
+ return &mac->ctrl_0;
+ case 1:
+ return &mac->ctrl_1;
+ case 2:
+ return &mac->ctrl_2;
+ case 3:
+ return &mac->ctrl_3;
+ case 4:
+ return &mac->ctrl_4;
+ case 5:
+ return &mac->ctrl_5;
+ default:
+ return NULL;
+ }
+}
+
+static inline void *to_mdio_phyaddr(struct vr9_switch_regs *regs,
+ unsigned int id)
+{
+ return &regs->mdio.phy_addr[to_mdio_phyaddr_id(id)];
+}
+
+static inline void *to_mii_miicfg(struct vr9_switch_regs *regs,
+ unsigned int id)
+{
+ switch (id) {
+ case 0:
+ return &regs->mii.mii_cfg0;
+ case 1:
+ return &regs->mii.mii_cfg1;
+ case 5:
+ return &regs->mii.mii_cfg5;
+ default:
+ return NULL;
+ }
+}
+
+static inline void *to_mii_pcdu(struct vr9_switch_regs *regs,
+ unsigned int id)
+{
+ switch (id) {
+ case 0:
+ return &regs->mii.pcdu0;
+ case 1:
+ return &regs->mii.pcdu1;
+ case 5:
+ return &regs->mii.pcdu5;
+ default:
+ return NULL;
+ }
+}
+
+#define VR9_SWITCH_REG_OFFSET(reg) (4 * (reg))
+
+#define BUILD_CHECK_VR9_REG(name, offset) \
+ BUILD_BUG_ON(offsetof(struct vr9_switch_regs, name) != (4 * offset))
+
+static inline void build_check_vr9_registers(void)
+{
+ BUILD_CHECK_VR9_REG(core, 0x0);
+ BUILD_CHECK_VR9_REG(bm.core, 0x40);
+ BUILD_CHECK_VR9_REG(bm.core.queue_gctrl, 0x4a);
+ BUILD_CHECK_VR9_REG(bm.port[0], 0x80);
+ BUILD_CHECK_VR9_REG(bm.queue, 0x100);
+ BUILD_CHECK_VR9_REG(bm.shaper, 0x140);
+ BUILD_CHECK_VR9_REG(pce.core, 0x438);
+ BUILD_CHECK_VR9_REG(pce.core.tbl_ctrl, 0x44f);
+ BUILD_CHECK_VR9_REG(pce.core.parser_stat, 0x469);
+ BUILD_CHECK_VR9_REG(pce.port[0], 0x480);
+ BUILD_CHECK_VR9_REG(pce.meter[0], 0x580);
+ BUILD_CHECK_VR9_REG(mac.core, 0x8c0);
+ BUILD_CHECK_VR9_REG(mac.port[0].pstat, 0x900);
+ BUILD_CHECK_VR9_REG(mac.port[0].ctrl_0, 0x903);
+ BUILD_CHECK_VR9_REG(mac.port[1].pstat, 0x90c);
+ BUILD_CHECK_VR9_REG(mac.port[1].ctrl_0, 0x90f);
+ BUILD_CHECK_VR9_REG(mac.port[2].pstat, 0x918);
+ BUILD_CHECK_VR9_REG(mac.port[2].ctrl_0, 0x91b);
+ BUILD_CHECK_VR9_REG(fdma.core, 0xa40);
+ BUILD_CHECK_VR9_REG(fdma.port[0], 0xa80);
+ BUILD_CHECK_VR9_REG(sdma.core, 0xb40);
+ BUILD_CHECK_VR9_REG(sdma.port[0], 0xbc0);
+ BUILD_CHECK_VR9_REG(mdio, 0xc40);
+ BUILD_CHECK_VR9_REG(mii, (0xc40 + 0x36));
+ BUILD_CHECK_VR9_REG(pmac, (0xc40 + 0x82));
+}
+
+#define BM_GCTRL_F_SRES 1
+
+#define MAC_CTRL0_BM (1 << 12)
+#define MAC_CTRL0_APADEN (1 << 11)
+#define MAC_CTRL0_VPAD2EN (1 << 10)
+#define MAC_CTRL0_VPADEN (1 << 9)
+#define MAC_CTRL0_PADEN (1 << 8)
+#define MAC_CTRL0_FCS (1 << 7)
+#define MAC_CTRL0_FCON_SHIFT 4
+#define MAC_CTRL0_FCON_AUTO (0x0 << MAC_CTRL0_FCON_SHIFT)
+#define MAC_CTRL0_FCON_RX (0x1 << MAC_CTRL0_FCON_SHIFT)
+#define MAC_CTRL0_FCON_TX (0x2 << MAC_CTRL0_FCON_SHIFT)
+#define MAC_CTRL0_FCON_RXTX (0x3 << MAC_CTRL0_FCON_SHIFT)
+#define MAC_CTRL0_FCON_NONE (0x4 << MAC_CTRL0_FCON_SHIFT)
+#define MAC_CTRL0_FDUP_SHIFT 2
+#define MAC_CTRL0_FDUP_AUTO (0x0 << MAC_CTRL0_FDUP_SHIFT)
+#define MAC_CTRL0_FDUP_EN (0x1 << MAC_CTRL0_FDUP_SHIFT)
+#define MAC_CTRL0_FDUP_DIS (0x3 << MAC_CTRL0_FDUP_SHIFT)
+#define MAC_CTRL0_GMII_AUTO 0x0
+#define MAC_CTRL0_GMII_MII 0x1
+#define MAC_CTRL0_GMII_GMII 0x2
+#define MAC_CTRL0_GMII_GMII_2G 0x3
+
+#define MAC_CTRL1_DEFERMODE (1 << 15)
+#define MAC_CTRL1_SHORTPRE (1 << 8)
+
+#define MAC_CTRL2_MLEN (1 << 3)
+#define MAC_CTRL2_LCHKL (1 << 2)
+#define MAC_CTRL2_LCHKS_DIS 0x0
+#define MAC_CTRL2_LCHKS_UNTAG 0x1
+#define MAC_CTRL2_LCHKS_TAG 0x2
+
+#define PHY_ADDR_LNKST_SHIFT 13
+#define PHY_ADDR_LNKST_AUTO (0x0 << PHY_ADDR_LNKST_SHIFT)
+#define PHY_ADDR_LNKST_UP (0x1 << PHY_ADDR_LNKST_SHIFT)
+#define PHY_ADDR_LNKST_DOWN (0x2 << PHY_ADDR_LNKST_SHIFT)
+#define PHY_ADDR_SPEED_SHIFT 11
+#define PHY_ADDR_SPEED_M10 (0x0 << PHY_ADDR_SPEED_SHIFT)
+#define PHY_ADDR_SPEED_M100 (0x1 << PHY_ADDR_SPEED_SHIFT)
+#define PHY_ADDR_SPEED_G1 (0x2 << PHY_ADDR_SPEED_SHIFT)
+#define PHY_ADDR_SPEED_AUTO (0x3 << PHY_ADDR_SPEED_SHIFT)
+#define PHY_ADDR_FDUP_SHIFT 9
+#define PHY_ADDR_FDUP_AUTO (0x0 << PHY_ADDR_FDUP_SHIFT)
+#define PHY_ADDR_FDUP_EN (0x1 << PHY_ADDR_FDUP_SHIFT)
+#define PHY_ADDR_FDUP_DIS (0x3 << PHY_ADDR_FDUP_SHIFT)
+#define PHY_ADDR_FCONTX_SHIFT 7
+#define PHY_ADDR_FCONTX_AUTO (0x0 << PHY_ADDR_FCONTX_SHIFT)
+#define PHY_ADDR_FCONTX_EN (0x1 << PHY_ADDR_FCONTX_SHIFT)
+#define PHY_ADDR_FCONTX_DIS (0x3 << PHY_ADDR_FCONTX_SHIFT)
+#define PHY_ADDR_FCONRX_SHIFT 5
+#define PHY_ADDR_FCONRX_AUTO (0x0 << PHY_ADDR_FCONRX_SHIFT)
+#define PHY_ADDR_FCONRX_EN (0x1 << PHY_ADDR_FCONRX_SHIFT)
+#define PHY_ADDR_FCONRX_DIS (0x3 << PHY_ADDR_FCONRX_SHIFT)
+
+#define MII_CFG_RES (1 << 15)
+#define MII_CFG_EN (1 << 14)
+#define MII_CFG_LDCLKDIS (1 << 12)
+#define MII_CFG_MIIRATE_SHIFT 4
+#define MII_CFG_MIIRATE_MASK (0x7 << MII_CFG_MIIRATE_SHIFT)
+#define MII_CFG_MIIRATE_M2P5 (0x0 << MII_CFG_MIIRATE_SHIFT)
+#define MII_CFG_MIIRATE_M25 (0x1 << MII_CFG_MIIRATE_SHIFT)
+#define MII_CFG_MIIRATE_M125 (0x2 << MII_CFG_MIIRATE_SHIFT)
+#define MII_CFG_MIIRATE_M50 (0x3 << MII_CFG_MIIRATE_SHIFT)
+#define MII_CFG_MIIRATE_AUTO (0x4 << MII_CFG_MIIRATE_SHIFT)
+#define MII_CFG_MIIMODE_MASK 0xf
+#define MII_CFG_MIIMODE_MIIP 0x0
+#define MII_CFG_MIIMODE_MIIM 0x1
+#define MII_CFG_MIIMODE_RMIIP 0x2
+#define MII_CFG_MIIMODE_RMIIM 0x3
+#define MII_CFG_MIIMODE_RGMII 0x4
+
+#define PCDU_RXDLY_SHIFT 7
+#define PCDU_RXDLY_MASK (0x7 << PCDU_RXDLY_SHIFT)
+#define PCDU_TXDLY_MASK 0x7
+
+#define PMAC_HD_CTL_FC (1 << 10)
+#define PMAC_HD_CTL_CCRC (1 << 9)
+#define PMAC_HD_CTL_RST (1 << 8)
+#define PMAC_HD_CTL_AST (1 << 7)
+#define PMAC_HD_CTL_RXSH (1 << 6)
+#define PMAC_HD_CTL_RC (1 << 4)
+#define PMAC_HD_CTL_AS (1 << 3)
+#define PMAC_HD_CTL_AC (1 << 2)
+
+#define PCE_PCTRL_0_IGSTEN (1 << 11)
+
+#define FDMA_PCTRL_STEN (1 << 1)
+#define FDMA_PCTRL_EN (1 << 0)
+
+#define SDMA_PCTRL_EN (1 << 0)
+
+#define MDIO_GLOB_CTRL_SE (1 << 15)
+
+#define MDIO_MDC_CFG1_RES (1 << 15)
+#define MDIO_MDC_CFG1_MCEN (1 << 8)
+
+#define MDIO_CTRL_MBUSY (1 << 12)
+#define MDIO_CTRL_OP_READ (1 << 11)
+#define MDIO_CTRL_OP_WRITE (1 << 10)
+#define MDIO_CTRL_PHYAD_SHIFT 5
+#define MDIO_CTRL_PHYAD_MASK (0x1f << MDIO_CTRL_PHYAD_SHIFT)
+#define MDIO_CTRL_REGAD_MASK 0x1f
+
+#endif /* __VRX200_SWITCH_H__ */
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -53,6 +53,7 @@
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
+ .section .text.symbol,"x"; \
symbol: .frame sp, 0, ra
/*
@@ -62,7 +63,8 @@ symbol: .frame sp, 0, ra
.globl symbol; \
.align 2; \
.type symbol, @function; \
- .ent symbol, 0; \
+ .ent symbol, 0; \
+ .section .text.symbol,"x"; \
symbol: .frame sp, framesize, rpc
/*
--- /dev/null
+++ b/arch/mips/include/asm/gpio.h
@@ -0,0 +1,6 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/gpio.h>
+#include <asm-generic/gpio.h>
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/chipid.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CHIPID_H__
+#define __LANTIQ_CHIPID_H__
+
+enum ltq_chip_partnum {
+ LTQ_SOC_UNKNOWN = 0,
+ LTQ_SOC_VRX288_2 = 0x000B, /* VRX288 v1.2 */
+ LTQ_SOC_VRX268_2 = 0x000C, /* VRX268 v1.2 */
+ LTQ_SOC_GRX288_2 = 0x000D, /* GRX288 v1.2 */
+ LTQ_SOC_DANUBE = 0x0129,
+ LTQ_SOC_DANUBE_S = 0x012B,
+ LTQ_SOC_TWINPASS = 0x012D,
+ LTQ_SOC_VRX288 = 0x01C0, /* VRX288 v1.1 */
+ LTQ_SOC_VRX268 = 0x01C2, /* VRX268 v1.1 */
+ LTQ_SOC_GRX288 = 0x01C9, /* GRX288 v1.1 */
+};
+
+extern unsigned int ltq_chip_version_get(void);
+extern unsigned int ltq_chip_partnum_get(void);
+extern const char *ltq_chip_partnum_str(void);
+
+extern void ltq_chip_print_info(void);
+
+#ifdef CONFIG_SOC_XWAY_DANUBE
+static inline int ltq_soc_is_danube(void)
+{
+ return 1;
+}
+#else
+static inline int ltq_soc_is_danube(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_XWAY_VRX200
+static inline int ltq_soc_is_vrx200(void)
+{
+ return 1;
+}
+
+static inline int ltq_soc_is_vrx200_v1(void)
+{
+ return ltq_chip_version_get() == 1;
+}
+
+static inline int ltq_soc_is_vrx200_v2(void)
+{
+ return ltq_chip_version_get() == 2;
+}
+#else
+static inline int ltq_soc_is_vrx200(void)
+{
+ return 0;
+}
+
+static inline int ltq_soc_is_vrx200_v1(void)
+{
+ return 0;
+}
+
+static inline int ltq_soc_is_vrx200_v2(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* __LANTIQ_CHIPID_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/clk.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ * *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CLK_H__
+#define __LANTIQ_CLK_H__
+
+/* Symbolic clock speeds */
+enum ltq_clk {
+ CLOCK_83_MHZ = 83333333,
+ CLOCK_111_MHZ = 111111111,
+ CLOCK_125_MHZ = 125000000,
+ CLOCK_133_MHZ = 133333333,
+ CLOCK_166_MHZ = 166666667,
+ CLOCK_197_MHZ = 197000000,
+ CLOCK_333_MHZ = 333333333,
+ CLOCK_393_MHZ = 393219000,
+ CLOCK_500_MHZ = 500000000,
+ CLOCK_600_MHZ = 600000000,
+ CLOCK_1000_MHZ = 1000000000,
+};
+
+extern unsigned long ltq_get_cpu_clock(void);
+extern unsigned long ltq_get_bus_clock(void);
+extern unsigned long ltq_get_io_region_clock(void);
+
+#endif /* __LANTIQ_CLK_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/config.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CONFIG_H__
+#define __LANTIQ_CONFIG_H__
+
+/* Memory usage */
+#define CONFIG_SYS_MAXARGS 24
+#define CONFIG_SYS_MALLOC_LEN 1024*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
+
+/* Command line */
+#define CONFIG_SYS_PROMPT CONFIG_MACH_TYPE " # "
+#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT)+16)
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Enable advanced console features on demand to reduce
+ * flash and RAM footprint
+ */
+#if defined(CONFIG_LTQ_ADVANCED_CONSOLE)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#endif
+
+/* SPI flash SPL */
+#if defined(CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH) && defined(CONFIG_SYS_BOOT_SFSPL)
+#define CONFIG_SPL
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPI_SPL_SIMPLE
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH) && defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_SPL
+#endif
+
+/* Common SPL */
+#if defined(CONFIG_SPL)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_START_S_PATH \
+ "arch/mips/cpu/mips32/lantiq-common"
+#define CONFIG_SPL_LDSCRIPT \
+ "arch/mips/cpu/mips32/lantiq-common/u-boot-spl.lds"
+#endif
+
+#if defined(CONFIG_LTQ_SPL_CONSOLE)
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#endif
+
+#if defined(CONFIG_LTQ_SPL_COMP_LZMA)
+#define CONFIG_LZMA
+#define CONFIG_SPL_LZMA_SUPPORT
+#endif
+
+#if defined(CONFIG_LTQ_SPL_COMP_LZO)
+#define CONFIG_LZO
+#define CONFIG_SPL_LZO_SUPPORT
+#endif
+
+/* Basic commands */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_LOADB
+
+/* Other U-Boot settings */
+#define CONFIG_TIMESTAMP
+
+/* Default environment */
+#define CONFIG_ENV_CONSOLEDEV \
+ "consoledev=" CONFIG_CONSOLE_DEV "\0"
+
+#define CONFIG_ENV_ADDCONSOLE \
+ "addconsole=setenv bootargs $bootargs" \
+ " console=$consoledev,$baudrate\0"
+
+#if defined(CONFIG_NET_DEV)
+#define CONFIG_ENV_NETDEV \
+ "netdev=" CONFIG_NET_DEV "\0"
+#else
+#define CONFIG_ENV_NETDEV \
+ "netdev=eth0\0"
+#endif
+
+#define CONFIG_ENV_ADDIP \
+ "addip=setenv bootargs $bootargs" \
+ " ip=$ipaddr:$serverip::::$netdev:off\0"
+
+#define CONFIG_ENV_ADDETH \
+ "addeth=setenv bootargs $bootargs" \
+ " ethaddr=$ethaddr\0"
+
+#define CONFIG_ENV_ADDMACHTYPE \
+ "addmachtype=setenv bootargs $bootargs" \
+ " machtype=" CONFIG_MACH_TYPE "\0"
+
+#if defined(CONFIG_LTQ_SUPPORT_NOR_FLASH)
+#define CONFIG_ENV_WRITE_UBOOT_NOR \
+ "write-uboot-nor=" \
+ "protect off " __stringify(CONFIG_SYS_FLASH_BASE) " +$filesize && " \
+ "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +$filesize && " \
+ "cp.b $fileaddr " __stringify(CONFIG_SYS_FLASH_BASE) " $filesize\0"
+
+#define CONFIG_ENV_LOAD_UBOOT_NOR \
+ "load-uboot-nor=tftpboot u-boot.bin\0" \
+ "load-uboot-norspl=tftpboot u-boot.ltq.norspl\0" \
+ "load-uboot-norspl-lzo=tftpboot u-boot.ltq.lzo.norspl\0" \
+ "load-uboot-norspl-lzma=tftpboot u-boot.ltq.lzma.norspl\0"
+#else
+#define CONFIG_ENV_WRITE_UBOOT_NOR
+#define CONFIG_ENV_LOAD_UBOOT_NOR
+#endif
+
+#if defined(CONFIG_LTQ_SUPPORT_SPI_FLASH)
+#define CONFIG_ENV_SF_PROBE \
+ "sf-probe=sf probe " __stringify(CONFIG_ENV_SPI_CS) " " \
+ __stringify(CONFIG_ENV_SPI_MAX_HZ) " " \
+ __stringify(CONFIG_ENV_SPI_MODE) " \0"
+
+#define CONFIG_ENV_WRITE_UBOOT_SF \
+ "write-uboot-sf=" \
+ "run sf-probe && sf erase 0 +$filesize && " \
+ "sf write $fileaddr 0 $filesize\0"
+
+#define CONFIG_ENV_LOAD_UBOOT_SF \
+ "load-uboot-sfspl=tftpboot u-boot.ltq.sfspl\0" \
+ "load-uboot-sfspl-lzo=tftpboot u-boot.ltq.lzo.sfspl\0" \
+ "load-uboot-sfspl-lzma=tftpboot u-boot.ltq.lzma.sfspl\0"
+#else
+#define CONFIG_ENV_SF_PROBE
+#define CONFIG_ENV_WRITE_UBOOT_SF
+#define CONFIG_ENV_LOAD_UBOOT_SF
+#endif
+
+#define CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_CONSOLEDEV \
+ CONFIG_ENV_ADDCONSOLE \
+ CONFIG_ENV_NETDEV \
+ CONFIG_ENV_ADDIP \
+ CONFIG_ENV_ADDETH \
+ CONFIG_ENV_ADDMACHTYPE \
+ CONFIG_ENV_WRITE_UBOOT_NOR \
+ CONFIG_ENV_LOAD_UBOOT_NOR \
+ CONFIG_ENV_SF_PROBE \
+ CONFIG_ENV_WRITE_UBOOT_SF \
+ CONFIG_ENV_LOAD_UBOOT_SF
+
+#endif /* __LANTIQ_CONFIG_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/cpu.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_CPU_H__
+#define __LANTIQ_CPU_H__
+
+enum ltq_boot_select {
+ BOOT_NOR,
+ BOOT_NOR_NO_BOOTROM,
+ BOOT_UART,
+ BOOT_UART_NO_EEPROM,
+ BOOT_SPI,
+ BOOT_NAND,
+ BOOT_PCI,
+ BOOT_MII0,
+ BOOT_RMII0,
+ BOOT_RGMII1,
+ BOOT_UNKNOWN,
+};
+
+enum ltq_boot_select ltq_boot_select(void);
+const char *ltq_boot_select_str(void);
+
+void ltq_pmu_init(void);
+void ltq_ebu_init(void);
+void ltq_gpio_init(void);
+
+void ltq_pll_init(void);
+void ltq_dcdc_init(unsigned int dig_ref);
+
+#endif /* __LANTIQ_CPU_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/dma.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_DMA_H__
+#define __LANTIQ_DMA_H__
+
+enum ltq_dma_endianess {
+ LTQ_DMA_ENDIANESS_B0_B1_B2_B3, /* No byte swapping */
+ LTQ_DMA_ENDIANESS_B1_B0_B3_B2, /* B0B1B2B3 => B1B0B3B2 */
+ LTQ_DMA_ENDIANESS_B2_B3_B0_B1, /* B0B1B2B3 => B2B3B0B1 */
+ LTQ_DMA_ENDIANESS_B3_B2_B1_B0, /* B0B1B2B3 => B3B2B1B0 */
+};
+
+enum ltq_dma_burst_len {
+ LTQ_DMA_BURST_2WORDS = 1,
+ LTQ_DMA_BURST_4WORDS = 2,
+ LTQ_DMA_BURST_8WORDS = 3,
+};
+
+struct ltq_dma_desc {
+ u32 ctl;
+ u32 addr;
+};
+
+struct ltq_dma_channel {
+ struct ltq_dma_device *dev;
+ u8 chan_no;
+ u8 class;
+ u16 num_desc;
+ struct ltq_dma_desc *desc_base;
+ void *mem_base;
+ u32 dma_addr;
+};
+
+struct ltq_dma_device {
+ enum ltq_dma_endianess rx_endian_swap;
+ enum ltq_dma_endianess tx_endian_swap;
+ enum ltq_dma_burst_len rx_burst_len;
+ enum ltq_dma_burst_len tx_burst_len;
+ struct ltq_dma_channel rx_chan;
+ struct ltq_dma_channel tx_chan;
+ u8 port;
+};
+
+/**
+ * Initialize DMA hardware and driver
+ */
+void ltq_dma_init(void);
+
+/**
+ * Register given DMA client context
+ *
+ * @returns 0 on success, negative value otherwise
+ */
+int ltq_dma_register(struct ltq_dma_device *dev);
+
+/**
+ * Reset and halt all channels related to given DMA client
+ */
+void ltq_dma_reset(struct ltq_dma_device *dev);
+void ltq_dma_enable(struct ltq_dma_device *dev);
+void ltq_dma_disable(struct ltq_dma_device *dev);
+
+/**
+ * Map RX DMA descriptor to memory region
+ *
+ * @returns 0 on success, negative value otherwise
+ */
+int ltq_dma_rx_map(struct ltq_dma_device *dev, int index, void *data, int len);
+
+/**
+ * Check if new data is available.
+ *
+ * @returns length of received data, 0 otherwise
+ */
+int ltq_dma_rx_poll(struct ltq_dma_device *dev, int index);
+
+int ltq_dma_rx_length(struct ltq_dma_device *dev, int index);
+
+/**
+ * Map TX DMA descriptor to memory region
+ *
+ * @returns 0 on success, negative value otherwise
+ */
+int ltq_dma_tx_map(struct ltq_dma_device *dev, int index, void *data, int len,
+ unsigned long timeout);
+
+int ltq_dma_tx_wait(struct ltq_dma_device *dev, int index,
+ unsigned long timeout);
+
+#endif /* __LANTIQ_DMA_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/eth.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_ETH_H__
+#define __LANTIQ_ETH_H__
+
+#include <phy.h>
+
+enum LTQ_ETH_PORT_FLAGS {
+ LTQ_ETH_PORT_NONE = 0,
+ LTQ_ETH_PORT_PHY = 1,
+ LTQ_ETH_PORT_SWITCH = (1 << 1),
+ LTQ_ETH_PORT_MAC = (1 << 2),
+};
+
+struct ltq_eth_port_config {
+ u8 num;
+ u8 phy_addr;
+ u16 flags;
+ phy_interface_t phy_if;
+ u8 rgmii_rx_delay;
+ u8 rgmii_tx_delay;
+};
+
+struct ltq_eth_board_config {
+ const struct ltq_eth_port_config *ports;
+ int num_ports;
+};
+
+extern int ltq_eth_initialize(const struct ltq_eth_board_config *board_config);
+
+#endif /* __LANTIQ_ETH_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/gpio.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_GPIO_H__
+#define __LANTIQ_GPIO_H__
+
+enum ltq_gpio_dir {
+ GPIO_DIR_IN = 0,
+ GPIO_DIR_OUT
+};
+
+enum ltq_gpio_od {
+ GPIO_OD_ACTIVE = 0,
+ GPIO_OD_NORMAL
+};
+
+enum ltq_gpio_altsel {
+ GPIO_ALTSEL_CLR = 0,
+ GPIO_ALTSEL_SET
+};
+
+extern int gpio_set_altfunc(unsigned gpio, int altsel0, int altsel1, int dir);
+extern int gpio_set_opendrain(unsigned gpio, int od);
+
+static inline int gpio_to_port(unsigned gpio)
+{
+ return gpio >> 4;
+}
+
+static inline int gpio_to_pin(unsigned gpio)
+{
+ return gpio & 0xF;
+}
+
+static inline int gpio_to_bit(unsigned gpio)
+{
+ return 1 << gpio_to_pin(gpio);
+}
+
+static inline int gpio_to_gpio(unsigned port, unsigned pin)
+{
+ return (port << 4) | (pin & 0xF);
+}
+
+#include <asm-generic/gpio.h>
+
+#endif /* __LANTIQ_GPIO_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/io.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_IO_H__
+#define __LANTIQ_IO_H__
+
+#include <asm/io.h>
+
+#define ltq_readb(a) __raw_readb(a)
+#define ltq_writeb(a, v) __raw_writeb(v, a)
+
+#define ltq_readl(a) __raw_readl(a)
+#define ltq_writel(a, v) __raw_writel(v, a)
+
+#define ltq_clrbits(a, clear) \
+ ltq_writel(a, ltq_readl(a) & ~(clear))
+
+#define ltq_setbits(a, set) \
+ ltq_writel(a, ltq_readl(a) | (set))
+
+#define ltq_clrsetbits(a, clear, set) \
+ ltq_writel(a, (ltq_readl(a) & ~(clear)) | (set))
+
+static inline void ltq_reg_dump(const void *addr, const char *desc)
+{
+ u32 data;
+
+ data = ltq_readl(addr);
+ printf("ltq_reg_dump: %s 0x%p = 0x%08x\n",
+ desc, addr, data);
+}
+
+#endif /* __LANTIQ_IO_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/pm.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_PM_H__
+#define __LANTIQ_PM_H__
+
+enum ltq_pm_modules {
+ LTQ_PM_CORE,
+ LTQ_PM_DMA,
+ LTQ_PM_ETH,
+ LTQ_PM_SPI,
+};
+
+u32 ltq_pm_map(enum ltq_pm_modules module);
+int ltq_pm_enable(enum ltq_pm_modules module);
+int ltq_pm_disable(enum ltq_pm_modules module);
+
+#endif /* __LANTIQ_PM_H__ */
--- /dev/null
+++ b/arch/mips/include/asm/lantiq/reset.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LANTIQ_RESET_H__
+#define __LANTIQ_RESET_H__
+
+enum ltq_reset_modules {
+ LTQ_RESET_CORE,
+ LTQ_RESET_DMA,
+ LTQ_RESET_ETH,
+ LTQ_RESET_PHY,
+ LTQ_RESET_HARD,
+ LTQ_RESET_SOFT,
+};
+
+extern u32 ltq_reset_map(enum ltq_reset_modules module);
+extern int ltq_reset_activate(enum ltq_reset_modules module);
+extern int ltq_reset_deactivate(enum ltq_reset_modules module);
+
+static inline int ltq_reset_once(enum ltq_reset_modules module, ulong usec)
+{
+ int ret;
+
+ ret = ltq_reset_activate(module);
+ if (ret)
+ return ret;
+
+ __udelay(usec);
+ ret = ltq_reset_deactivate(module);
+
+ return ret;
+}
+
+#endif /* __LANTIQ_RESET_H__ */
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -46,7 +46,10 @@
#define CP0_ENTRYLO1 $3
#define CP0_CONF $3
#define CP0_CONTEXT $4
+#define CP0_CONTEXTCONFIG $4,1
+#define CP0_USERLOCAL $4,1
#define CP0_PAGEMASK $5
+#define CP0_PAGEGRAIN $5,1
#define CP0_WIRED $6
#define CP0_INFO $7
#define CP0_BADVADDR $8
@@ -54,10 +57,19 @@
#define CP0_ENTRYHI $10
#define CP0_COMPARE $11
#define CP0_STATUS $12
+#define CP0_INTCTL $12,1
+#define CP0_SRSCTL $12,2
+#define CP0_SRSMAP $12,3
+#define CP0_SRSHIGH $12,4
#define CP0_CAUSE $13
#define CP0_EPC $14
#define CP0_PRID $15
+#define CP0_EBASE $15,1
#define CP0_CONFIG $16
+#define CP0_CONFIG1 $16,1
+#define CP0_CONFIG2 $16,2
+#define CP0_CONFIG3 $16,3
+#define CP0_CONFIG7 $16,7
#define CP0_LLADDR $17
#define CP0_WATCHLO $18
#define CP0_WATCHHI $19
@@ -70,7 +82,17 @@
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
+#define CP0_ITAGLO $28
+#define CP0_IDATALO $28,1
+#define CP0_DTAGLO $28,2
+#define CP0_DDATALO $28,3
+#define CP0_L23TAGLO $28,4
+#define CP0_L23DATALO $28,5
#define CP0_TAGHI $29
+#define CP0_IDATAHI $29,1
+#define CP0_DTAGHI $29,2
+#define CP0_L23TAGHI $29,4
+#define CP0_L23DATAHI $29,5
#define CP0_ERROREPC $30
#define CP0_DESAVE $31
@@ -395,6 +417,12 @@
#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
+ * Bits in the coprocessor 0 EBase register.
+ */
+#define EBASEB_CPUNUM 0
+#define EBASEF_CPUNUM (_ULCAST_(1023))
+
+/*
* Bits in the coprocessor 0 config register.
*/
/* Generic bits. */
--- a/arch/mips/include/asm/u-boot-mips.h
+++ b/arch/mips/include/asm/u-boot-mips.h
@@ -23,3 +23,4 @@ static inline unsigned long image_copy_e
}
extern int incaip_set_cpuclk(void);
+extern int arch_cpu_init(void);
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -33,6 +33,16 @@ static char *failed = "*** failed ***\n"
*/
const unsigned long mips_io_port_base = -1;
+int __arch_cpu_init(void)
+{
+ /*
+ * Nothing to do in this dummy implementation
+ */
+ return 0;
+}
+int arch_cpu_init(void)
+ __attribute__((weak, alias("__arch_cpu_init")));
+
int __board_early_init_f(void)
{
/*
@@ -106,6 +116,7 @@ static int init_baudrate(void)
typedef int (init_fnc_t)(void);
init_fnc_t *init_sequence[] = {
+ arch_cpu_init,
board_early_init_f,
timer_init,
env_init, /* initialize environment */
--- /dev/null
+++ b/board/lantiq/easy50712/Makefile
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/board/lantiq/easy50712/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
--- /dev/null
+++ b/board/lantiq/easy50712/ddr_settings.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
+#define MC_DC01_VALUE 0x0
+#define MC_DC02_VALUE 0x0
+#define MC_DC03_VALUE 0x0
+#define MC_DC04_VALUE 0x0
+#define MC_DC05_VALUE 0x200
+#define MC_DC06_VALUE 0x605
+#define MC_DC07_VALUE 0x303
+#define MC_DC08_VALUE 0x102
+#define MC_DC09_VALUE 0x70a
+#define MC_DC10_VALUE 0x203
+#define MC_DC11_VALUE 0xc02
+#define MC_DC12_VALUE 0x1C8
+#define MC_DC13_VALUE 0x1
+#define MC_DC14_VALUE 0x0
+#define MC_DC15_VALUE 0x13c
+#define MC_DC16_VALUE 0xC800
+#define MC_DC17_VALUE 0xd
+#define MC_DC18_VALUE 0x300
+#define MC_DC19_VALUE 0x200
+#define MC_DC20_VALUE 0xA04
+#define MC_DC21_VALUE 0xd00
+#define MC_DC22_VALUE 0xd0d
+#define MC_DC23_VALUE 0x0
+#define MC_DC24_VALUE 0x62
+#define MC_DC25_VALUE 0x0
+#define MC_DC26_VALUE 0x0
+#define MC_DC27_VALUE 0x0
+#define MC_DC28_VALUE 0x510
+#define MC_DC29_VALUE 0x2d89
+#define MC_DC30_VALUE 0x8300
+#define MC_DC31_VALUE 0x0
+#define MC_DC32_VALUE 0x0
+#define MC_DC33_VALUE 0x0
+#define MC_DC34_VALUE 0x0
+#define MC_DC35_VALUE 0x0
+#define MC_DC36_VALUE 0x0
+#define MC_DC37_VALUE 0x0
+#define MC_DC38_VALUE 0x0
+#define MC_DC39_VALUE 0x0
+#define MC_DC40_VALUE 0x0
+#define MC_DC41_VALUE 0x0
+#define MC_DC42_VALUE 0x0
+#define MC_DC43_VALUE 0x0
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x500
+#define MC_DC46_VALUE 0x0
--- /dev/null
+++ b/board/lantiq/easy50712/easy50712.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <switch.h>
+#include <spi.h>
+#include <asm/gpio.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/chipid.h>
+
+static void gpio_init(void)
+{
+ /* SPI/CS output (low-active) for serial flash */
+ gpio_direction_output(22, 1);
+
+ /* EBU.FL_CS1 as output for NAND CE */
+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* EBU.FL_A23 as output for NAND CLE */
+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* EBU.FL_A24 as output for NAND ALE */
+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+
+ /* enable CLK_OUT2 for external switch */
+ gpio_set_altfunc(3, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
+
+int board_early_init_f(void)
+{
+ gpio_init();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: " CONFIG_BOARD_NAME "\n");
+ ltq_chip_print_info();
+
+ return 0;
+}
+
+static const struct ltq_eth_port_config eth_port_config[] = {
+ /* MAC0: Lantiq ADM6996I switch */
+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
+};
+
+static const struct ltq_eth_board_config eth_board_config = {
+ .ports = eth_port_config,
+ .num_ports = ARRAY_SIZE(eth_port_config),
+};
+
+int board_eth_init(bd_t *bis)
+{
+ return ltq_eth_initialize(&eth_board_config);
+}
+
+static struct switch_device adm6996i_dev = {
+ .name = "adm6996i",
+ .cpu_port = 5,
+ .port_mask = 0xF,
+};
+
+int board_switch_init(void)
+{
+ /* Deactivate HRST line to release reset of ADM6996I switch */
+ ltq_reset_once(LTQ_RESET_HARD, 200000);
+
+ /* ADM6996I needs some time to come out of reset */
+ __udelay(50000);
+
+ return switch_device_register(&adm6996i_dev);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ if (bus)
+ return 0;
+
+ switch (cs) {
+ case 2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 2:
+ gpio_set_value(22, 0);
+ break;
+ default:
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 2:
+ gpio_set_value(22, 1);
+ break;
+ default:
+ break;
+ }
+}
--- /dev/null
+++ b/board/lantiq/easy80920/Makefile
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/board/lantiq/easy80920/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
--- /dev/null
+++ b/board/lantiq/easy80920/ddr_settings.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_CCR00_VALUE 0x101
+#define MC_CCR01_VALUE 0x1000100
+#define MC_CCR02_VALUE 0x1010000
+#define MC_CCR03_VALUE 0x101
+#define MC_CCR04_VALUE 0x1000000
+#define MC_CCR05_VALUE 0x1000101
+#define MC_CCR06_VALUE 0x1000100
+#define MC_CCR07_VALUE 0x1010000
+#define MC_CCR08_VALUE 0x1000101
+#define MC_CCR09_VALUE 0x0
+#define MC_CCR10_VALUE 0x2000100
+#define MC_CCR11_VALUE 0x2000300
+#define MC_CCR12_VALUE 0x30000
+#define MC_CCR13_VALUE 0x202
+#define MC_CCR14_VALUE 0x7080A0F
+#define MC_CCR15_VALUE 0x2040F
+#define MC_CCR16_VALUE 0x40000
+#define MC_CCR17_VALUE 0x70102
+#define MC_CCR18_VALUE 0x4020002
+#define MC_CCR19_VALUE 0x30302
+#define MC_CCR20_VALUE 0x8000700
+#define MC_CCR21_VALUE 0x40F020A
+#define MC_CCR22_VALUE 0x0
+#define MC_CCR23_VALUE 0xC020000
+#define MC_CCR24_VALUE 0x4401B04
+#define MC_CCR25_VALUE 0x0
+#define MC_CCR26_VALUE 0x0
+#define MC_CCR27_VALUE 0x6420000
+#define MC_CCR28_VALUE 0x0
+#define MC_CCR29_VALUE 0x0
+#define MC_CCR30_VALUE 0x798
+#define MC_CCR31_VALUE 0x0
+#define MC_CCR32_VALUE 0x0
+#define MC_CCR33_VALUE 0x650000
+#define MC_CCR34_VALUE 0x200C8
+#define MC_CCR35_VALUE 0x1D445D
+#define MC_CCR36_VALUE 0xC8
+#define MC_CCR37_VALUE 0xC351
+#define MC_CCR38_VALUE 0x0
+#define MC_CCR39_VALUE 0x141F04
+#define MC_CCR40_VALUE 0x142704
+#define MC_CCR41_VALUE 0x141b42
+#define MC_CCR42_VALUE 0x141b42
+#define MC_CCR43_VALUE 0x566504
+#define MC_CCR44_VALUE 0x566504
+#define MC_CCR45_VALUE 0x565F17
+#define MC_CCR46_VALUE 0x565F17
+#define MC_CCR47_VALUE 0x0
+#define MC_CCR48_VALUE 0x0
+#define MC_CCR49_VALUE 0x0
+#define MC_CCR50_VALUE 0x0
+#define MC_CCR51_VALUE 0x0
+#define MC_CCR52_VALUE 0x133
+#define MC_CCR53_VALUE 0xF3014B27
+#define MC_CCR54_VALUE 0xF3014B27
+#define MC_CCR55_VALUE 0xF3014B27
+#define MC_CCR56_VALUE 0xF3014B27
+#define MC_CCR57_VALUE 0x7800301
+#define MC_CCR58_VALUE 0x7800301
+#define MC_CCR59_VALUE 0x7800301
+#define MC_CCR60_VALUE 0x7800301
+#define MC_CCR61_VALUE 0x4
--- /dev/null
+++ b/board/lantiq/easy80920/easy80920.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/gpio.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/chipid.h>
+#include <asm/lantiq/cpu.h>
+#include <asm/arch/gphy.h>
+
+#if defined(CONFIG_SPL_BUILD)
+#define do_gpio_init 1
+#define do_pll_init 1
+#define do_dcdc_init 0
+#elif defined(CONFIG_SYS_BOOT_RAM)
+#define do_gpio_init 1
+#define do_pll_init 0
+#define do_dcdc_init 1
+#elif defined(CONFIG_SYS_BOOT_NOR)
+#define do_gpio_init 1
+#define do_pll_init 1
+#define do_dcdc_init 1
+#else
+#define do_gpio_init 0
+#define do_pll_init 0
+#define do_dcdc_init 1
+#endif
+
+static void gpio_init(void)
+{
+ /* SPI CS 0.4 to serial flash */
+ gpio_direction_output(10, 1);
+
+ /* EBU.FL_CS1 as output for NAND CE */
+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* EBU.FL_A23 as output for NAND CLE */
+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* EBU.FL_A24 as output for NAND ALE */
+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* GPIO 3.0 as input for NAND Ready Busy */
+ gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
+ /* GPIO 3.1 as output for NAND Read */
+ gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
+
+int board_early_init_f(void)
+{
+ if (do_gpio_init)
+ gpio_init();
+
+ if (do_pll_init)
+ ltq_pll_init();
+
+ if (do_dcdc_init)
+ ltq_dcdc_init(0x7F);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: " CONFIG_BOARD_NAME "\n");
+ ltq_chip_print_info();
+
+ return 0;
+}
+
+static const struct ltq_eth_port_config eth_port_config[] = {
+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
+ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+ /* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
+ { 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
+ /* GMAC3: unused */
+ { 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
+ /* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
+ { 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
+ /* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
+ { 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+};
+
+static const struct ltq_eth_board_config eth_board_config = {
+ .ports = eth_port_config,
+ .num_ports = ARRAY_SIZE(eth_port_config),
+};
+
+int board_eth_init(bd_t * bis)
+{
+ const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
+ const ulong fw_addr = 0x80FF0000;
+
+ ltq_gphy_phy11g_a1x_load(fw_addr);
+
+ ltq_cgu_gphy_clk_src(clk);
+
+ ltq_rcu_gphy_boot(0, fw_addr);
+ ltq_rcu_gphy_boot(1, fw_addr);
+
+ return ltq_eth_initialize(&eth_board_config);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ if (bus)
+ return 0;
+
+ if (cs == 4)
+ return 1;
+
+ return 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 4:
+ gpio_set_value(10, 0);
+ break;
+ default:
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 4:
+ gpio_set_value(10, 1);
+ break;
+ default:
+ break;
+ }
+}
--- a/boards.cfg
+++ b/boards.cfg
@@ -502,10 +502,17 @@ Active mips mips32 au1x0
Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
+Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
+Active mips mips32 vrx200 lantiq easy80920 easy80920_nor easy80920:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 vrx200 lantiq easy80920 easy80920_norspl easy80920:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 vrx200 lantiq easy80920 easy80920_ram easy80920:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 vrx200 lantiq easy80920 easy80920_sfspl easy80920:SYS_BOOT_SFSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -12,6 +12,7 @@ LIB := $(obj)libdma.o
COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
COBJS-$(CONFIG_APBH_DMA) += apbh_dma.o
COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o
+COBJS-$(CONFIG_LANTIQ_DMA) += lantiq_dma.o
COBJS-$(CONFIG_OMAP3_DMA) += omap3_dma.o
COBJS := $(COBJS-y)
--- /dev/null
+++ b/drivers/dma/lantiq_dma.c
@@ -0,0 +1,387 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <watchdog.h>
+#include <linux/compiler.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/dma.h>
+#include <asm/lantiq/pm.h>
+#include <asm/lantiq/reset.h>
+#include <asm/arch/soc.h>
+#include <asm/processor.h>
+
+#define DMA_CTRL_PKTARB (1 << 31)
+#define DMA_CTRL_MBRSTARB (1 << 30)
+#define DMA_CTRL_MBRSTCNT_SHIFT 16
+#define DMA_CTRL_MBRSTCNT_MASK (0x3ff << DMA_CTRL_MBRSTCNT_SHIFT)
+#define DMA_CTRL_DRB (1 << 8)
+#define DMA_CTRL_RESET (1 << 0)
+
+#define DMA_CPOLL_EN (1 << 31)
+#define DMA_CPOLL_CNT_SHIFT 4
+#define DMA_CPOLL_CNT_MASK (0xFFF << DMA_CPOLL_CNT_SHIFT)
+
+#define DMA_CCTRL_TXWGT_SHIFT 16
+#define DMA_CCTRL_TXWGT_MASK (0x3 << DMA_CCTRL_TXWGT_SHIFT)
+#define DMA_CCTRL_CLASS_SHIFT 9
+#define DMA_CCTRL_CLASS_MASK (0x3 << DMA_CCTRL_CLASS_SHIFT)
+#define DMA_CCTRL_RST (1 << 1)
+#define DMA_CCTRL_ONOFF (1 << 0)
+
+#define DMA_PCTRL_TXBL_SHIFT 4
+#define DMA_PCTRL_TXBL_2WORDS (1 << DMA_PCTRL_TXBL_SHIFT)
+#define DMA_PCTRL_TXBL_4WORDS (2 << DMA_PCTRL_TXBL_SHIFT)
+#define DMA_PCTRL_TXBL_8WORDS (3 << DMA_PCTRL_TXBL_SHIFT)
+#define DMA_PCTRL_RXBL_SHIFT 2
+#define DMA_PCTRL_RXBL_2WORDS (1 << DMA_PCTRL_RXBL_SHIFT)
+#define DMA_PCTRL_RXBL_4WORDS (2 << DMA_PCTRL_RXBL_SHIFT)
+#define DMA_PCTRL_RXBL_8WORDS (3 << DMA_PCTRL_RXBL_SHIFT)
+#define DMA_PCTRL_TXENDI_SHIFT 10
+#define DMA_PCTRL_TXENDI_MASK (0x3 << DMA_PCTRL_TXENDI_SHIFT)
+#define DMA_PCTRL_RXENDI_SHIFT 8
+#define DMA_PCTRL_RXENDI_MASK (0x3 << DMA_PCTRL_RXENDI_SHIFT)
+
+#define DMA_DESC_OWN (1 << 31)
+#define DMA_DESC_C (1 << 30)
+#define DMA_DESC_SOP (1 << 29)
+#define DMA_DESC_EOP (1 << 28)
+#define DMA_DESC_TX_OFFSET(x) ((x & 0x1f) << 23)
+#define DMA_DESC_RX_OFFSET(x) ((x & 0x3) << 23)
+#define DMA_DESC_LENGTH(x) (x & 0xffff)
+
+#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a)))
+
+struct ltq_dma_regs {
+ u32 clc; /* Clock control */
+ u32 rsvd0;
+ u32 id; /* Identification */
+ u32 rsvd1;
+ u32 ctrl; /* Control */
+ u32 cpoll; /* Channel polling */
+ u32 cs; /* Channel select */
+ u32 cctrl; /* Channel control */
+ u32 cdba; /* Channel descriptor base address */
+ u32 cdlen; /* Channel descriptor length */
+ u32 cis; /* Channel interrupt status */
+ u32 cie; /* Channel interrupt enable */
+ u32 cgbl; /* Channel global buffer length */
+ u32 cdptnrd; /* Current descriptor pointer */
+ u32 rsvd2[2];
+ u32 ps; /* Port select */
+ u32 pctrl; /* Port control */
+ u32 rsvd3[43];
+ u32 irnen; /* Interrupt node enable */
+ u32 irncr; /* Interrupt node control */
+ u32 irnicr; /* Interrupt capture */
+};
+
+static struct ltq_dma_regs *ltq_dma_regs =
+ (struct ltq_dma_regs *) CKSEG1ADDR(LTQ_DMA_BASE);
+
+static inline unsigned long ltq_dma_addr_to_virt(u32 dma_addr)
+{
+ return KSEG0ADDR(dma_addr);
+}
+
+static inline u32 ltq_virt_to_dma_addr(void *addr)
+{
+ return CPHYSADDR(addr);
+}
+
+static inline int ltq_dma_burst_align(enum ltq_dma_burst_len burst_len)
+{
+ switch (burst_len) {
+ case LTQ_DMA_BURST_2WORDS:
+ return 2 * 4;
+ case LTQ_DMA_BURST_4WORDS:
+ return 4 * 4;
+ case LTQ_DMA_BURST_8WORDS:
+ return 8 * 4;
+ }
+
+ return 0;
+}
+
+static inline void ltq_dma_sync(void)
+{
+ __asm__ __volatile__("sync");
+}
+
+static inline void ltq_dma_dcache_wb_inv(const void *ptr, size_t size)
+{
+ unsigned long addr = (unsigned long) ptr;
+
+ flush_dcache_range(addr, addr + size);
+ ltq_dma_sync();
+}
+
+static inline void ltq_dma_dcache_inv(const void *ptr, size_t size)
+{
+ unsigned long addr = (unsigned long) ptr;
+
+ invalidate_dcache_range(addr, addr + size);
+}
+
+void ltq_dma_init(void)
+{
+ /* Power up DMA */
+ ltq_pm_enable(LTQ_PM_DMA);
+
+ /* Reset DMA */
+ ltq_setbits(&ltq_dma_regs->ctrl, DMA_CTRL_RESET);
+
+ /* Disable and clear all interrupts */
+ ltq_writel(&ltq_dma_regs->irnen, 0);
+ ltq_writel(&ltq_dma_regs->irncr, 0xFFFFF);
+
+#if 0
+ /* Enable packet arbitration */
+ ltq_setbits(&ltq_dma_regs->ctrl, DMA_CTRL_PKTARB);
+#endif
+
+#if 0
+ /* Enable descriptor read back */
+ ltq_setbits(&ltq_dma_regs->ctrl, DMA_CTRL_DRB);
+#endif
+
+ /* Enable polling for descriptor fetching for all channels */
+ ltq_writel(&ltq_dma_regs->cpoll, DMA_CPOLL_EN |
+ (4 << DMA_CPOLL_CNT_SHIFT));
+}
+
+static void ltq_dma_channel_reset(struct ltq_dma_channel *chan)
+{
+ ltq_writel(&ltq_dma_regs->cs, chan->chan_no);
+ ltq_setbits(&ltq_dma_regs->cctrl, DMA_CCTRL_RST);
+}
+
+static void ltq_dma_channel_enable(struct ltq_dma_channel *chan)
+{
+ ltq_writel(&ltq_dma_regs->cs, chan->chan_no);
+ ltq_setbits(&ltq_dma_regs->cctrl, DMA_CCTRL_ONOFF);
+}
+
+static void ltq_dma_channel_disable(struct ltq_dma_channel *chan)
+{
+ ltq_writel(&ltq_dma_regs->cs, chan->chan_no);
+ ltq_clrbits(&ltq_dma_regs->cctrl, DMA_CCTRL_ONOFF);
+}
+
+static void ltq_dma_port_init(struct ltq_dma_device *dev)
+{
+ u32 pctrl;
+
+ pctrl = dev->tx_endian_swap << DMA_PCTRL_TXENDI_SHIFT;
+ pctrl |= dev->rx_endian_swap << DMA_PCTRL_RXENDI_SHIFT;
+ pctrl |= dev->tx_burst_len << DMA_PCTRL_TXBL_SHIFT;
+ pctrl |= dev->rx_burst_len << DMA_PCTRL_RXBL_SHIFT;
+
+ ltq_writel(&ltq_dma_regs->ps, dev->port);
+ ltq_writel(&ltq_dma_regs->pctrl, pctrl);
+}
+
+static int ltq_dma_alloc_descriptors(struct ltq_dma_device *dev,
+ struct ltq_dma_channel *chan)
+{
+ size_t size;
+ void *desc_base;
+
+ size = ALIGN(sizeof(struct ltq_dma_desc) * chan->num_desc +
+ ARCH_DMA_MINALIGN, ARCH_DMA_MINALIGN);
+
+ chan->mem_base = malloc(size);
+ if (!chan->mem_base)
+ return 1;
+
+ memset(chan->mem_base, 0, size);
+ ltq_dma_dcache_wb_inv(chan->mem_base, size);
+
+ desc_base = PTR_ALIGN(chan->mem_base, ARCH_DMA_MINALIGN);
+
+ debug("DMA: mem %p, desc %p\n", chan->mem_base, desc_base);
+
+ /* Align descriptor base to 8 bytes */
+ chan->desc_base = (void *) CKSEG1ADDR(desc_base);
+ chan->dma_addr = CPHYSADDR(desc_base);
+ chan->dev = dev;
+
+ debug("DMA: desc_base %p, size %u\n", chan->desc_base, size);
+
+ /* Configure hardware with location of descriptor list */
+ ltq_writel(&ltq_dma_regs->cs, chan->chan_no);
+ ltq_writel(&ltq_dma_regs->cdba, chan->dma_addr);
+ ltq_writel(&ltq_dma_regs->cdlen, chan->num_desc);
+ ltq_writel(&ltq_dma_regs->cctrl, (3 << DMA_CCTRL_TXWGT_SHIFT) |
+ (chan->class << DMA_CCTRL_CLASS_SHIFT));
+ ltq_writel(&ltq_dma_regs->cctrl, DMA_CCTRL_RST);
+
+ return 0;
+}
+
+static void ltq_dma_free_descriptors(struct ltq_dma_channel *chan)
+{
+ ltq_writel(&ltq_dma_regs->cs, chan->chan_no);
+ ltq_writel(&ltq_dma_regs->cdba, 0);
+ ltq_writel(&ltq_dma_regs->cdlen, 0);
+
+ ltq_dma_channel_reset(chan);
+
+ free(chan->mem_base);
+}
+
+int ltq_dma_register(struct ltq_dma_device *dev)
+{
+ int ret;
+
+ ltq_dma_port_init(dev);
+
+ ret = ltq_dma_alloc_descriptors(dev, &dev->rx_chan);
+ if (ret)
+ return ret;
+
+ ret = ltq_dma_alloc_descriptors(dev, &dev->tx_chan);
+ if (ret) {
+ ltq_dma_free_descriptors(&dev->rx_chan);
+ return ret;
+ }
+
+ return 0;
+}
+
+void ltq_dma_reset(struct ltq_dma_device *dev)
+{
+ ltq_dma_channel_reset(&dev->rx_chan);
+ ltq_dma_channel_reset(&dev->tx_chan);
+}
+
+void ltq_dma_enable(struct ltq_dma_device *dev)
+{
+ ltq_dma_channel_enable(&dev->rx_chan);
+ ltq_dma_channel_enable(&dev->tx_chan);
+}
+
+void ltq_dma_disable(struct ltq_dma_device *dev)
+{
+ ltq_dma_channel_disable(&dev->rx_chan);
+ ltq_dma_channel_disable(&dev->tx_chan);
+}
+
+int ltq_dma_rx_map(struct ltq_dma_device *dev, int index, void *data, int len)
+{
+ struct ltq_dma_channel *chan = &dev->rx_chan;
+ struct ltq_dma_desc *desc = &chan->desc_base[index];
+ u32 dma_addr = ltq_virt_to_dma_addr(data);
+ unsigned int offset;
+
+ offset = dma_addr % ltq_dma_burst_align(dev->rx_burst_len);
+
+ ltq_dma_dcache_inv(data, len);
+
+#if 0
+ printf("%s: index %d, data %p, dma_addr %08x, offset %u, len %d\n",
+ __func__, index, data, dma_addr, offset, len);
+#endif
+
+
+ desc->addr = dma_addr - offset;
+ desc->ctl = DMA_DESC_OWN | DMA_DESC_RX_OFFSET(offset) |
+ DMA_DESC_LENGTH(len);
+
+#if 0
+ printf("%s: index %d, desc %p, desc->ctl %08x\n",
+ __func__, index, desc, desc->ctl);
+#endif
+
+ return 0;
+}
+
+int ltq_dma_rx_poll(struct ltq_dma_device *dev, int index)
+{
+ struct ltq_dma_channel *chan = &dev->rx_chan;
+ struct ltq_dma_desc *desc = &chan->desc_base[index];
+
+#if 0
+ printf("%s: index %d, desc %p, desc->ctl %08x\n",
+ __func__, index, desc, desc->ctl);
+#endif
+
+ if (desc->ctl & DMA_DESC_OWN)
+ return 0;
+
+ if (desc->ctl & DMA_DESC_C)
+ return 1;
+
+ return 0;
+}
+
+int ltq_dma_rx_length(struct ltq_dma_device *dev, int index)
+{
+ struct ltq_dma_channel *chan = &dev->rx_chan;
+ struct ltq_dma_desc *desc = &chan->desc_base[index];
+
+ return DMA_DESC_LENGTH(desc->ctl);
+}
+
+int ltq_dma_tx_map(struct ltq_dma_device *dev, int index, void *data, int len,
+ unsigned long timeout)
+{
+ struct ltq_dma_channel *chan = &dev->tx_chan;
+ struct ltq_dma_desc *desc = &chan->desc_base[index];
+ unsigned int offset;
+ unsigned long timebase = get_timer(0);
+ u32 dma_addr = ltq_virt_to_dma_addr(data);
+
+ while (desc->ctl & DMA_DESC_OWN) {
+ WATCHDOG_RESET();
+
+ if (get_timer(timebase) >= timeout) {
+#if 0
+ printf("%s: timeout: index %d, desc %p, desc->ctl %08x\n",
+ __func__, index, desc, desc->ctl);
+#endif
+ return -1;
+ }
+ }
+
+ offset = dma_addr % ltq_dma_burst_align(dev->rx_burst_len);
+
+#if 0
+ printf("%s: index %d, desc %p, data %p, dma_addr %08x, offset %u, len %d\n",
+ __func__, index, desc, data, dma_addr, offset, len);
+#endif
+
+ ltq_dma_dcache_wb_inv(data, len);
+
+ desc->addr = dma_addr - offset;
+ desc->ctl = DMA_DESC_OWN | DMA_DESC_SOP | DMA_DESC_EOP |
+ DMA_DESC_TX_OFFSET(offset) | DMA_DESC_LENGTH(len);
+
+#if 0
+ printf("%s: index %d, desc %p, desc->ctl %08x\n",
+ __func__, index, desc, desc->ctl);
+#endif
+
+ return 0;
+}
+
+int ltq_dma_tx_wait(struct ltq_dma_device *dev, int index,
+ unsigned long timeout)
+{
+ struct ltq_dma_channel *chan = &dev->tx_chan;
+ struct ltq_dma_desc *desc = &chan->desc_base[index];
+ unsigned long timebase = get_timer(0);
+
+ while ((desc->ctl & (DMA_DESC_OWN | DMA_DESC_C)) != DMA_DESC_C) {
+ WATCHDOG_RESET();
+
+ if (get_timer(timebase) >= timeout)
+ return -1;
+ }
+
+ return 0;
+}
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ LIB := $(obj)libgpio.o
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
+COBJS-$(CONFIG_LANTIQ_GPIO) += lantiq_gpio.o
COBJS-$(CONFIG_MARVELL_GPIO) += mvgpio.o
COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
--- /dev/null
+++ b/drivers/gpio/lantiq_gpio.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/gpio.h>
+#include <asm/lantiq/io.h>
+
+#define SSIO_GPIO_BASE 64
+
+#define SSIO_CON0_SWU (1 << 31)
+#define SSIO_CON0_RZFL (1 << 26)
+#define SSIO_CON0_GPHY1_SHIFT 27
+#define SSIO_CON0_GPHY1_CONFIG ((CONFIG_LTQ_SSIO_GPHY1_MODE & 0x7) << 27)
+
+#define SSIO_CON1_US_FPI (2 << 30)
+#define SSIO_CON1_FPID_2HZ (0 << 23)
+#define SSIO_CON1_FPID_4HZ (1 << 23)
+#define SSIO_CON1_FPID_8HZ (2 << 23)
+#define SSIO_CON1_FPID_10HZ (3 << 23)
+#define SSIO_CON1_FPIS_1_2 (1 << 20)
+#define SSIO_CON1_FPIS_1_32 (2 << 20)
+#define SSIO_CON1_FPIS_1_64 (3 << 20)
+
+#define SSIO_CON1_GPHY2_SHIFT 15
+#define SSIO_CON1_GPHY2_CONFIG ((CONFIG_LTQ_SSIO_GPHY2_MODE & 0x7) << 15)
+
+#define SSIO_CON1_GROUP2 (1 << 2)
+#define SSIO_CON1_GROUP1 (1 << 1)
+#define SSIO_CON1_GROUP0 (1 << 0)
+#define SSIO_CON1_GROUP_CONFIG (0x3)
+
+#ifdef CONFIG_LTQ_SSIO_SHIFT_REGS
+#define enable_ssio 1
+#else
+#define enable_ssio 0
+
+#define CONFIG_LTQ_SSIO_GPHY1_MODE 0
+#define CONFIG_LTQ_SSIO_GPHY2_MODE 0
+#define CONFIG_LTQ_SSIO_INIT_VALUE 0
+#endif
+
+#ifdef CONFIG_LTQ_SSIO_EDGE_FALLING
+#define SSIO_RZFL_CONFIG SSIO_CON0_RZFL
+#else
+#define SSIO_RZFL_CONFIG 0
+#endif
+
+struct ltq_gpio_port_regs {
+ __be32 out;
+ __be32 in;
+ __be32 dir;
+ __be32 altsel0;
+ __be32 altsel1;
+ __be32 od;
+ __be32 stoff;
+ __be32 pudsel;
+ __be32 puden;
+ __be32 rsvd1[3];
+};
+
+struct ltq_gpio_regs {
+ u32 rsvd[4];
+ struct ltq_gpio_port_regs ports[CONFIG_LTQ_GPIO_MAX_BANKS];
+};
+
+struct ltq_gpio3_regs {
+ u32 rsvd0[13];
+ __be32 od;
+ __be32 pudsel;
+ __be32 puden;
+ u32 rsvd1[9];
+ __be32 altsel1;
+ u32 rsvd2[14];
+ __be32 out;
+ __be32 in;
+ __be32 dir;
+ __be32 altsel0;
+};
+
+struct ltq_ssio_regs {
+ __be32 con0;
+ __be32 con1;
+ __be32 cpu0;
+ __be32 cpu1;
+ __be32 ar;
+};
+
+static struct ltq_gpio_regs *ltq_gpio_regs =
+ (struct ltq_gpio_regs *) CKSEG1ADDR(LTQ_GPIO_BASE);
+
+static struct ltq_gpio3_regs *ltq_gpio3_regs =
+ (struct ltq_gpio3_regs *) CKSEG1ADDR(LTQ_GPIO_BASE);
+
+static struct ltq_ssio_regs *ltq_ssio_regs =
+ (struct ltq_ssio_regs *) CKSEG1ADDR(LTQ_SSIO_BASE);
+
+static int is_gpio_bank3(unsigned int port)
+{
+#ifdef CONFIG_LTQ_HAS_GPIO_BANK3
+ return port == 3;
+#else
+ return 0;
+#endif
+}
+
+static int is_gpio_ssio(unsigned int gpio)
+{
+#ifdef CONFIG_LTQ_SSIO_SHIFT_REGS
+ return gpio >= SSIO_GPIO_BASE;
+#else
+ return 0;
+#endif
+}
+
+static inline int ssio_gpio_to_bit(unsigned gpio)
+{
+ return 1 << (gpio - SSIO_GPIO_BASE);
+}
+
+int ltq_gpio_init(void)
+{
+ ltq_writel(&ltq_ssio_regs->ar, 0);
+ ltq_writel(&ltq_ssio_regs->cpu0, CONFIG_LTQ_SSIO_INIT_VALUE);
+ ltq_writel(&ltq_ssio_regs->cpu1, 0);
+ ltq_writel(&ltq_ssio_regs->con0, SSIO_CON0_SWU);
+
+ if (enable_ssio) {
+ ltq_writel(&ltq_ssio_regs->con0, SSIO_CON0_GPHY1_CONFIG |
+ SSIO_RZFL_CONFIG);
+ ltq_writel(&ltq_ssio_regs->con1, SSIO_CON1_US_FPI |
+ SSIO_CON1_FPID_8HZ | SSIO_CON1_GPHY2_CONFIG |
+ SSIO_CON1_GROUP_CONFIG);
+ }
+
+ return 0;
+}
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+ return 0;
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+ unsigned port = gpio_to_port(gpio);
+ const void *gpio_od = &ltq_gpio_regs->ports[port].od;
+ const void *gpio_altsel0 = &ltq_gpio_regs->ports[port].altsel0;
+ const void *gpio_altsel1 = &ltq_gpio_regs->ports[port].altsel1;
+ const void *gpio_dir = &ltq_gpio_regs->ports[port].dir;
+
+ if (is_gpio_ssio(gpio))
+ return 0;
+
+ if (is_gpio_bank3(port)) {
+ gpio_od = &ltq_gpio3_regs->od;
+ gpio_altsel0 = &ltq_gpio3_regs->altsel0;
+ gpio_altsel1 = &ltq_gpio3_regs->altsel1;
+ gpio_dir = &ltq_gpio3_regs->dir;
+ }
+
+ /*
+ * Reset open drain and altsel configs to workaround improper
+ * reset values or unwanted modifications by BootROM
+ */
+ ltq_clrbits(gpio_od, gpio_to_bit(gpio));
+ ltq_clrbits(gpio_altsel0, gpio_to_bit(gpio));
+ ltq_clrbits(gpio_altsel1, gpio_to_bit(gpio));
+
+ /* Switch to input */
+ ltq_clrbits(gpio_dir, gpio_to_bit(gpio));
+
+ return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ unsigned port = gpio_to_port(gpio);
+ const void *gpio_od = &ltq_gpio_regs->ports[port].od;
+ const void *gpio_altsel0 = &ltq_gpio_regs->ports[port].altsel0;
+ const void *gpio_altsel1 = &ltq_gpio_regs->ports[port].altsel1;
+ const void *gpio_dir = &ltq_gpio_regs->ports[port].dir;
+ const void *gpio_out = &ltq_gpio_regs->ports[port].out;
+ u32 data = gpio_to_bit(gpio);
+
+ if (is_gpio_ssio(gpio)) {
+ data = ssio_gpio_to_bit(gpio);
+ if (value)
+ ltq_setbits(&ltq_ssio_regs->cpu0, data);
+ else
+ ltq_clrbits(&ltq_ssio_regs->cpu0, data);
+
+ return 0;
+ }
+
+ if (is_gpio_bank3(port)) {
+ gpio_od = &ltq_gpio3_regs->od;
+ gpio_altsel0 = &ltq_gpio3_regs->altsel0;
+ gpio_altsel1 = &ltq_gpio3_regs->altsel1;
+ gpio_dir = &ltq_gpio3_regs->dir;
+ gpio_out = &ltq_gpio3_regs->out;
+ }
+
+ /*
+ * Reset open drain and altsel configs to workaround improper
+ * reset values or unwanted modifications by BootROM
+ */
+ ltq_setbits(gpio_od, data);
+ ltq_clrbits(gpio_altsel0, data);
+ ltq_clrbits(gpio_altsel1, data);
+
+ if (value)
+ ltq_setbits(gpio_out, data);
+ else
+ ltq_clrbits(gpio_out, data);
+
+ /* Switch to output */
+ ltq_setbits(gpio_dir, data);
+
+ return 0;
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ unsigned port = gpio_to_port(gpio);
+ const void *gpio_in = &ltq_gpio_regs->ports[port].in;
+ u32 data = gpio_to_bit(gpio);
+ u32 val;
+
+ if (is_gpio_ssio(gpio)) {
+ gpio_in = &ltq_ssio_regs->cpu0;
+ data = ssio_gpio_to_bit(gpio);
+ }
+
+ if (is_gpio_bank3(port))
+ gpio_in = &ltq_gpio3_regs->in;
+
+ val = ltq_readl(gpio_in);
+
+ return !!(val & data);
+}
+
+int gpio_set_value(unsigned gpio, int value)
+{
+ unsigned port = gpio_to_port(gpio);
+ const void *gpio_out = &ltq_gpio_regs->ports[port].out;
+ u32 data = gpio_to_bit(gpio);
+
+ if (is_gpio_ssio(gpio)) {
+ gpio_out = &ltq_ssio_regs->cpu0;
+ data = ssio_gpio_to_bit(gpio);
+ }
+
+ if (is_gpio_bank3(port))
+ gpio_out = &ltq_gpio3_regs->out;
+
+ if (value)
+ ltq_setbits(gpio_out, data);
+ else
+ ltq_clrbits(gpio_out, data);
+
+ return 0;
+}
+
+int gpio_set_altfunc(unsigned gpio, int altsel0, int altsel1, int dir)
+{
+ unsigned port = gpio_to_port(gpio);
+ const void *gpio_od = &ltq_gpio_regs->ports[port].od;
+ const void *gpio_altsel0 = &ltq_gpio_regs->ports[port].altsel0;
+ const void *gpio_altsel1 = &ltq_gpio_regs->ports[port].altsel1;
+ const void *gpio_dir = &ltq_gpio_regs->ports[port].dir;
+
+ if (is_gpio_ssio(gpio))
+ return 0;
+
+ if (is_gpio_bank3(port)) {
+ gpio_od = &ltq_gpio3_regs->od;
+ gpio_altsel0 = &ltq_gpio3_regs->altsel0;
+ gpio_altsel1 = &ltq_gpio3_regs->altsel1;
+ gpio_dir = &ltq_gpio3_regs->dir;
+ }
+
+ if (altsel0)
+ ltq_setbits(gpio_altsel0, gpio_to_bit(gpio));
+ else
+ ltq_clrbits(gpio_altsel0, gpio_to_bit(gpio));
+
+ if (altsel1)
+ ltq_setbits(gpio_altsel1, gpio_to_bit(gpio));
+ else
+ ltq_clrbits(gpio_altsel1, gpio_to_bit(gpio));
+
+ if (dir) {
+ ltq_setbits(gpio_od, gpio_to_bit(gpio));
+ ltq_setbits(gpio_dir, gpio_to_bit(gpio));
+ } else {
+ ltq_clrbits(gpio_od, gpio_to_bit(gpio));
+ ltq_clrbits(gpio_dir, gpio_to_bit(gpio));
+ }
+
+ return 0;
+}
+
+int gpio_set_opendrain(unsigned gpio, int od)
+{
+ unsigned port = gpio_to_port(gpio);
+ const void *gpio_od = &ltq_gpio_regs->ports[port].od;
+
+ if (is_gpio_ssio(gpio))
+ return 0;
+
+ if (is_gpio_bank3(port))
+ gpio_od = &ltq_gpio3_regs->od;
+
+ if (od)
+ ltq_setbits(gpio_od, gpio_to_bit(gpio));
+ else
+ ltq_clrbits(gpio_od, gpio_to_bit(gpio));
+
+ return 0;
+}
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -161,6 +161,18 @@ u64 flash_read64(void *addr)__attribute_
#define flash_read64 __flash_read64
#endif
+static inline void *__flash_swap_addr(unsigned long addr)
+{
+ return (void *) addr;
+}
+
+#ifdef CONFIG_CFI_FLASH_USE_WEAK_ADDR_SWAP
+void *flash_swap_addr(unsigned long addr)
+ __attribute__((weak, alias("__flash_swap_addr")));
+#else
+#define flash_swap_addr __flash_swap_addr
+#endif
+
/*-----------------------------------------------------------------------
*/
#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
@@ -196,7 +208,7 @@ flash_map (flash_info_t * info, flash_se
{
unsigned int byte_offset = offset * info->portwidth;
- return (void *)(info->start[sect] + byte_offset);
+ return flash_swap_addr(info->start[sect] + byte_offset);
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -53,6 +53,7 @@ COBJS-$(CONFIG_NAND_JZ4740) += jz4740_na
COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
+COBJS-$(CONFIG_NAND_LANTIQ) += lantiq_nand.o
COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o
COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o
--- /dev/null
+++ b/drivers/mtd/nand/lantiq_nand.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/mtd/nand.h>
+#include <linux/compiler.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/nand.h>
+#include <asm/lantiq/io.h>
+
+#define NAND_CON_ECC_ON (1 << 31)
+#define NAND_CON_LATCH_PRE (1 << 23)
+#define NAND_CON_LATCH_WP (1 << 22)
+#define NAND_CON_LATCH_SE (1 << 21)
+#define NAND_CON_LATCH_CS (1 << 20)
+#define NAND_CON_LATCH_CLE (1 << 19)
+#define NAND_CON_LATCH_ALE (1 << 18)
+#define NAND_CON_OUT_CS1 (1 << 10)
+#define NAND_CON_IN_CS1 (1 << 8)
+#define NAND_CON_PRE_P (1 << 7)
+#define NAND_CON_WP_P (1 << 6)
+#define NAND_CON_SE_P (1 << 5)
+#define NAND_CON_CS_P (1 << 4)
+#define NAND_CON_CLE_P (1 << 3)
+#define NAND_CON_ALE_P (1 << 2)
+#define NAND_CON_CSMUX (1 << 1)
+#define NAND_CON_NANDM (1 << 0)
+
+#define NAND_WAIT_WR_C (1 << 3)
+#define NAND_WAIT_RDBY (1 << 0)
+
+#define NAND_CMD_ALE (1 << 2)
+#define NAND_CMD_CLE (1 << 3)
+#define NAND_CMD_CS (1 << 4)
+#define NAND_CMD_SE (1 << 5)
+#define NAND_CMD_WP (1 << 6)
+#define NAND_CMD_PRE (1 << 7)
+
+struct ltq_nand_regs {
+ __be32 con; /* NAND controller control */
+ __be32 wait; /* NAND Flash Device RD/BY State */
+ __be32 ecc0; /* NAND Flash ECC Register 0 */
+ __be32 ecc_ac; /* NAND Flash ECC Register address counter */
+ __be32 ecc_cr; /* NAND Flash ECC Comparison */
+};
+
+static struct ltq_nand_regs *ltq_nand_regs =
+ (struct ltq_nand_regs *) CKSEG1ADDR(LTQ_EBU_NAND_BASE);
+
+static void ltq_nand_wait_ready(void)
+{
+ while ((ltq_readl(&ltq_nand_regs->wait) & NAND_WAIT_WR_C) == 0)
+ ;
+}
+
+static int ltq_nand_dev_ready(struct mtd_info *mtd)
+{
+ u32 data = ltq_readl(&ltq_nand_regs->wait);
+ return data & NAND_WAIT_RDBY;
+}
+
+static void ltq_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip == 0) {
+ ltq_setbits(&ltq_nand_regs->con, NAND_CON_NANDM);
+ ltq_setbits(&ltq_nand_regs->con, NAND_CON_LATCH_CS);
+ } else {
+ ltq_clrbits(&ltq_nand_regs->con, NAND_CON_LATCH_CS);
+ ltq_clrbits(&ltq_nand_regs->con, NAND_CON_NANDM);
+ }
+}
+
+static void ltq_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned long addr = (unsigned long) chip->IO_ADDR_W;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ addr |= NAND_CMD_ALE;
+ else
+ addr &= ~NAND_CMD_ALE;
+
+ if (ctrl & NAND_CLE)
+ addr |= NAND_CMD_CLE;
+ else
+ addr &= ~NAND_CMD_CLE;
+
+ chip->IO_ADDR_W = (void __iomem *) addr;
+ }
+
+ if (cmd != NAND_CMD_NONE) {
+ writeb(cmd, chip->IO_ADDR_W);
+ ltq_nand_wait_ready();
+ }
+}
+
+int ltq_nand_init(struct nand_chip *nand)
+{
+ /* Enable NAND, set NAND CS to EBU CS1, enable EBU CS mux */
+ ltq_writel(&ltq_nand_regs->con, NAND_CON_OUT_CS1 | NAND_CON_IN_CS1 |
+ NAND_CON_PRE_P | NAND_CON_WP_P | NAND_CON_SE_P |
+ NAND_CON_CS_P | NAND_CON_CSMUX);
+
+ nand->dev_ready = ltq_nand_dev_ready;
+ nand->select_chip = ltq_nand_select_chip;
+ nand->cmd_ctrl = ltq_nand_cmd_ctrl;
+
+ nand->chip_delay = 30;
+ nand->options = 0;
+ nand->ecc.mode = NAND_ECC_SOFT;
+
+ /* Enable CS bit in address offset */
+ nand->IO_ADDR_R = nand->IO_ADDR_R + NAND_CMD_CS;
+ nand->IO_ADDR_W = nand->IO_ADDR_W + NAND_CMD_CS;
+
+ return 0;
+}
+
+__weak int board_nand_init(struct nand_chip *chip)
+{
+ return ltq_nand_init(chip);
+}
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -37,6 +37,8 @@ COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-i
COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
COBJS-$(CONFIG_KS8851_MLL) += ks8851_mll.o
COBJS-$(CONFIG_LAN91C96) += lan91c96.o
+COBJS-$(CONFIG_LANTIQ_DANUBE_ETOP) += lantiq_danube_etop.o
+COBJS-$(CONFIG_LANTIQ_VRX200_SWITCH) += lantiq_vrx200_switch.o
COBJS-$(CONFIG_MACB) += macb.o
COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
--- /dev/null
+++ b/drivers/net/lantiq_danube_etop.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <switch.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/pm.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/dma.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_PPE_ETOP_MDIO_ACC_RA (1 << 31)
+#define LTQ_PPE_ETOP_MDIO_CFG_UMM1 (1 << 2)
+#define LTQ_PPE_ETOP_MDIO_CFG_UMM0 (1 << 1)
+
+#define LTQ_PPE_ETOP_CFG_TCKINV1 (1 << 11)
+#define LTQ_PPE_ETOP_CFG_TCKINV0 (1 << 10)
+#define LTQ_PPE_ETOP_CFG_FEN1 (1 << 9)
+#define LTQ_PPE_ETOP_CFG_FEN0 (1 << 8)
+#define LTQ_PPE_ETOP_CFG_SEN1 (1 << 7)
+#define LTQ_PPE_ETOP_CFG_SEN0 (1 << 6)
+#define LTQ_PPE_ETOP_CFG_TURBO1 (1 << 5)
+#define LTQ_PPE_ETOP_CFG_REMII1 (1 << 4)
+#define LTQ_PPE_ETOP_CFG_OFF1 (1 << 3)
+#define LTQ_PPE_ETOP_CFG_TURBO0 (1 << 2)
+#define LTQ_PPE_ETOP_CFG_REMII0 (1 << 1)
+#define LTQ_PPE_ETOP_CFG_OFF0 (1 << 0)
+
+#define LTQ_PPE_ENET0_MAC_CFG_CGEN (1 << 11)
+#define LTQ_PPE_ENET0_MAC_CFG_DUPLEX (1 << 2)
+#define LTQ_PPE_ENET0_MAC_CFG_SPEED (1 << 1)
+#define LTQ_PPE_ENET0_MAC_CFG_LINK (1 << 0)
+
+#define LTQ_PPE_ENETS0_CFG_FTUC (1 << 28)
+
+#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
+#define LTQ_ETH_TX_BUFFER_CNT 8
+#define LTQ_ETH_RX_DATA_SIZE PKTSIZE_ALIGN
+#define LTQ_ETH_IP_ALIGN 2
+
+#define LTQ_MDIO_DRV_NAME "ltq-mdio"
+#define LTQ_ETH_DRV_NAME "ltq-eth"
+
+struct ltq_ppe_etop_regs {
+ u32 mdio_cfg; /* MDIO configuration */
+ u32 mdio_acc; /* MDIO access */
+ u32 cfg; /* ETOP configuration */
+ u32 ig_vlan_cos; /* IG VLAN priority CoS mapping */
+ u32 ig_dscp_cos3; /* IG DSCP CoS mapping 3 */
+ u32 ig_dscp_cos2; /* IG DSCP CoS mapping 2 */
+ u32 ig_dscp_cos1; /* IG DSCP CoS mapping 1 */
+ u32 ig_dscp_cos0; /* IG DSCP CoS mapping 0 */
+ u32 ig_plen_ctrl; /* IG frame length control */
+ u32 rsvd0[3];
+ u32 vpid; /* VLAN protocol ID */
+};
+
+struct ltq_ppe_enet_regs {
+ u32 mac_cfg; /* MAC configuration */
+ u32 rsvd0[3];
+ u32 ig_cfg; /* Ingress configuration */
+ u32 ig_pgcnt; /* Ingress buffer used page count */
+ u32 rsvd1;
+ u32 ig_buf_ctrl; /* Ingress buffer backpressure ctrl */
+ u32 cos_cfg; /* Classification configuration */
+ u32 ig_drop; /* Total ingress drop frames */
+ u32 ig_err; /* Total ingress error frames */
+ u32 mac_da0; /* Ingress MAC address 0 */
+ u32 mac_da1; /* Ingress MAC address 1 */
+ u32 rsvd2[22];
+ u32 pgcnt; /* Page counter */
+ u32 rsvd3;
+ u32 hf_ctrl; /* Half duplex control */
+ u32 tx_ctrl; /* Transmit control */
+ u32 rsvd4;
+ u32 vlcos0; /* VLAN insertion config CoS 0 */
+ u32 vlcos1; /* VLAN insertion config CoS 1 */
+ u32 vlcos2; /* VLAN insertion config CoS 2 */
+ u32 vlcos3; /* VLAN insertion config CoS 3 */
+ u32 eg_col; /* Total egress collision frames */
+ u32 eg_drop; /* Total egress drop frames */
+};
+
+struct ltq_eth_priv {
+ struct ltq_dma_device dma_dev;
+ struct mii_dev *bus;
+ struct eth_device *dev;
+ int rx_num;
+ int tx_num;
+};
+
+struct ltq_mdio_access {
+ union {
+ struct {
+ unsigned ra:1;
+ unsigned rw:1;
+ unsigned rsvd:4;
+ unsigned phya:5;
+ unsigned rega:5;
+ unsigned phyd:16;
+ } reg;
+ u32 val;
+ };
+};
+
+static struct ltq_ppe_etop_regs *ltq_ppe_etop_regs =
+ (struct ltq_ppe_etop_regs *) CKSEG1ADDR(LTQ_PPE_ETOP_BASE);
+
+static struct ltq_ppe_enet_regs *ltq_ppe_enet0_regs =
+ (struct ltq_ppe_enet_regs *) CKSEG1ADDR(LTQ_PPE_ENET0_BASE);
+
+static inline int ltq_mdio_poll(void)
+{
+ struct ltq_mdio_access acc;
+ unsigned cnt = 10000;
+
+ while (likely(cnt--)) {
+ acc.val = ltq_readl(&ltq_ppe_etop_regs->mdio_acc);
+ if (!acc.reg.ra)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int ltq_mdio_read(struct mii_dev *bus, int addr, int dev_addr,
+ int regnum)
+{
+ struct ltq_mdio_access acc;
+ int ret;
+
+ acc.val = 0;
+ acc.reg.ra = 1;
+ acc.reg.rw = 1;
+ acc.reg.phya = addr;
+ acc.reg.rega = regnum;
+
+ ret = ltq_mdio_poll();
+ if (ret)
+ return ret;
+
+ ltq_writel(&ltq_ppe_etop_regs->mdio_acc, acc.val);
+
+ ret = ltq_mdio_poll();
+ if (ret)
+ return ret;
+
+ acc.val = ltq_readl(&ltq_ppe_etop_regs->mdio_acc);
+
+ return acc.reg.phyd;
+}
+
+static int ltq_mdio_write(struct mii_dev *bus, int addr, int dev_addr,
+ int regnum, u16 val)
+{
+ struct ltq_mdio_access acc;
+ int ret;
+
+ acc.val = 0;
+ acc.reg.ra = 1;
+ acc.reg.rw = 0;
+ acc.reg.phya = addr;
+ acc.reg.rega = regnum;
+ acc.reg.phyd = val;
+
+ ret = ltq_mdio_poll();
+ if (ret)
+ return ret;
+
+ ltq_writel(&ltq_ppe_etop_regs->mdio_acc, acc.val);
+
+ return 0;
+}
+
+static inline void ltq_eth_write_hwaddr(const struct eth_device *dev)
+{
+ u32 da0, da1;
+
+ da0 = (dev->enetaddr[0] << 24) + (dev->enetaddr[1] << 16) +
+ (dev->enetaddr[2] << 8) + dev->enetaddr[3];
+ da1 = (dev->enetaddr[4] << 24) + (dev->enetaddr[5] << 16);
+
+ ltq_writel(&ltq_ppe_enet0_regs->mac_da0, da0);
+ ltq_writel(&ltq_ppe_enet0_regs->mac_da1, da1);
+}
+
+static inline u8 *ltq_eth_rx_packet_align(int rx_num)
+{
+ u8 *packet = (u8 *) NetRxPackets[rx_num];
+
+ /*
+ * IP header needs
+ */
+ return packet + LTQ_ETH_IP_ALIGN;
+}
+
+static int ltq_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ int i;
+
+ ltq_eth_write_hwaddr(dev);
+
+ for (i = 0; i < LTQ_ETH_RX_BUFFER_CNT; i++)
+ ltq_dma_rx_map(dma_dev, i, ltq_eth_rx_packet_align(i),
+ LTQ_ETH_RX_DATA_SIZE);
+
+ ltq_dma_enable(dma_dev);
+
+ priv->rx_num = 0;
+ priv->tx_num = 0;
+
+ return 0;
+}
+
+static void ltq_eth_halt(struct eth_device *dev)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+
+ ltq_dma_reset(dma_dev);
+}
+
+static int ltq_eth_send(struct eth_device *dev, void *packet, int length)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ int err;
+
+ /* Minimum payload length w/ CRC is 60 bytes */
+ if (length < 60)
+ length = 60;
+
+ err = ltq_dma_tx_map(dma_dev, priv->tx_num, packet, length, 10);
+ if (err) {
+ puts("NET: timeout on waiting for TX descriptor\n");
+ return -1;
+ }
+
+ priv->tx_num = (priv->tx_num + 1) % LTQ_ETH_TX_BUFFER_CNT;
+
+ return err;
+}
+
+static int ltq_eth_recv(struct eth_device *dev)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ u8 *packet;
+ int len;
+
+ if (!ltq_dma_rx_poll(dma_dev, priv->rx_num))
+ return 0;
+
+#if 0
+ printf("%s: rx_num %d\n", __func__, priv->rx_num);
+#endif
+
+ len = ltq_dma_rx_length(dma_dev, priv->rx_num);
+ packet = ltq_eth_rx_packet_align(priv->rx_num);
+
+#if 0
+ printf("%s: received: packet %p, len %u, rx_num %d\n",
+ __func__, packet, len, priv->rx_num);
+#endif
+
+ if (len)
+ NetReceive(packet, len);
+
+ ltq_dma_rx_map(dma_dev, priv->rx_num, packet,
+ LTQ_ETH_RX_DATA_SIZE);
+
+ priv->rx_num = (priv->rx_num + 1) % LTQ_ETH_RX_BUFFER_CNT;
+
+ return 0;
+}
+
+static void ltq_eth_hw_init(const struct ltq_eth_port_config *port)
+{
+ u32 data;
+
+ /* Power up ethernet subsystems */
+ ltq_pm_enable(LTQ_PM_ETH);
+
+ /* Reset ethernet subsystems */
+ ltq_reset_once(LTQ_RESET_ETH, 1);
+
+ /* Disable MDIO auto-detection */
+ ltq_clrbits(&ltq_ppe_etop_regs->mdio_cfg, LTQ_PPE_ETOP_MDIO_CFG_UMM1 |
+ LTQ_PPE_ETOP_MDIO_CFG_UMM0);
+
+ /* Enable CRC generation, Full Duplex, 100Mbps, Link up */
+ ltq_writel(&ltq_ppe_enet0_regs->mac_cfg, LTQ_PPE_ENET0_MAC_CFG_CGEN |
+ LTQ_PPE_ENET0_MAC_CFG_DUPLEX |
+ LTQ_PPE_ENET0_MAC_CFG_SPEED |
+ LTQ_PPE_ENET0_MAC_CFG_LINK);
+
+ /* Reset ETOP cfg and disable all */
+ data = LTQ_PPE_ETOP_CFG_OFF0 | LTQ_PPE_ETOP_CFG_OFF1;
+
+ /* Enable ENET0, enable store and fetch */
+ data &= ~LTQ_PPE_ETOP_CFG_OFF0;
+ data |= LTQ_PPE_ETOP_CFG_SEN0 | LTQ_PPE_ETOP_CFG_FEN0;
+
+ if (port->phy_if == PHY_INTERFACE_MODE_RMII)
+ data |= LTQ_PPE_ETOP_CFG_REMII0;
+ else
+ data &= ~LTQ_PPE_ETOP_CFG_REMII0;
+
+ ltq_writel(&ltq_ppe_etop_regs->cfg, data);
+
+ /* Set allowed packet length from 64 bytes to 1518 bytes */
+ ltq_writel(&ltq_ppe_etop_regs->ig_plen_ctrl, (64 << 16) | 1518);
+
+ /* Enable filter for unicast packets */
+ ltq_setbits(&ltq_ppe_enet0_regs->ig_cfg, LTQ_PPE_ENETS0_CFG_FTUC);
+}
+
+int ltq_eth_initialize(const struct ltq_eth_board_config *board_config)
+{
+ struct eth_device *dev;
+ struct mii_dev *bus;
+ struct ltq_eth_priv *priv;
+ struct ltq_dma_device *dma_dev;
+ const struct ltq_eth_port_config *port = &board_config->ports[0];
+ struct phy_device *phy;
+ struct switch_device *sw;
+ int ret;
+
+ ltq_dma_init();
+ ltq_eth_hw_init(port);
+
+ dev = calloc(1, sizeof(*dev));
+ if (!dev)
+ return -1;
+
+ priv = calloc(1, sizeof(*priv));
+ if (!priv)
+ return -1;
+
+ bus = mdio_alloc();
+ if (!bus)
+ return -1;
+
+ sprintf(dev->name, LTQ_ETH_DRV_NAME);
+ dev->priv = priv;
+ dev->init = ltq_eth_init;
+ dev->halt = ltq_eth_halt;
+ dev->recv = ltq_eth_recv;
+ dev->send = ltq_eth_send;
+
+ sprintf(bus->name, LTQ_MDIO_DRV_NAME);
+ bus->read = ltq_mdio_read;
+ bus->write = ltq_mdio_write;
+ bus->priv = priv;
+
+ dma_dev = &priv->dma_dev;
+ dma_dev->port = 0;
+ dma_dev->rx_chan.chan_no = 6;
+ dma_dev->rx_chan.class = 3;
+ dma_dev->rx_chan.num_desc = LTQ_ETH_RX_BUFFER_CNT;
+ dma_dev->rx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+ dma_dev->rx_burst_len = LTQ_DMA_BURST_2WORDS;
+ dma_dev->tx_chan.chan_no = 7;
+ dma_dev->tx_chan.class = 3;
+ dma_dev->tx_chan.num_desc = LTQ_ETH_TX_BUFFER_CNT;
+ dma_dev->tx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+ dma_dev->tx_burst_len = LTQ_DMA_BURST_2WORDS;
+
+ priv->bus = bus;
+ priv->dev = dev;
+
+ ret = ltq_dma_register(dma_dev);
+ if (ret)
+ return ret;
+
+ ret = mdio_register(bus);
+ if (ret)
+ return ret;
+
+ ret = eth_register(dev);
+ if (ret)
+ return ret;
+
+ if (port->flags & LTQ_ETH_PORT_SWITCH) {
+ sw = switch_connect(bus);
+ if (!sw)
+ return -1;
+
+ switch_setup(sw);
+ }
+
+ if (port->flags & LTQ_ETH_PORT_PHY) {
+ phy = phy_connect(bus, port->phy_addr, dev, port->phy_if);
+ if (!phy)
+ return -1;
+
+ phy_config(phy);
+ }
+
+ return 0;
+}
--- /dev/null
+++ b/drivers/net/lantiq_vrx200_switch.c
@@ -0,0 +1,675 @@
+/*
+ * Copyright (C) 2010-2011 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define DEBUG
+
+#include <common.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <linux/compiler.h>
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/pm.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/dma.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/switch.h>
+
+#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
+#define LTQ_ETH_TX_BUFFER_CNT 8
+#define LTQ_ETH_RX_DATA_SIZE PKTSIZE_ALIGN
+#define LTQ_ETH_IP_ALIGN 2
+
+#define LTQ_MDIO_DRV_NAME "ltq-mdio"
+#define LTQ_ETH_DRV_NAME "ltq-eth"
+
+#define LTQ_ETHSW_MAX_GMAC 6
+#define LTQ_ETHSW_PMAC 6
+
+struct ltq_mdio_phy_addr_reg {
+ union {
+ struct {
+ unsigned rsvd:1;
+ unsigned lnkst:2; /* Link status control */
+ unsigned speed:2; /* Speed control */
+ unsigned fdup:2; /* Full duplex control */
+ unsigned fcontx:2; /* Flow control mode TX */
+ unsigned fconrx:2; /* Flow control mode RX */
+ unsigned addr:5; /* PHY address */
+ } bits;
+ u16 val;
+ };
+};
+
+enum ltq_mdio_phy_addr_lnkst {
+ LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0,
+ LTQ_MDIO_PHY_ADDR_LNKST_UP = 1,
+ LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2,
+};
+
+enum ltq_mdio_phy_addr_speed {
+ LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0,
+ LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1,
+ LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2,
+ LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3,
+};
+
+enum ltq_mdio_phy_addr_fdup {
+ LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0,
+ LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1,
+ LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3,
+};
+
+enum ltq_mdio_phy_addr_fcon {
+ LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0,
+ LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1,
+ LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3,
+};
+
+struct ltq_mii_mii_cfg_reg {
+ union {
+ struct {
+ unsigned res:1; /* Hardware reset */
+ unsigned en:1; /* xMII interface enable */
+ unsigned isol:1; /* xMII interface isolate */
+ unsigned ldclkdis:1; /* Link down clock disable */
+ unsigned rsvd:1;
+ unsigned crs:2; /* CRS sensitivity config */
+ unsigned rgmii_ibs:1; /* RGMII In Band status */
+ unsigned rmii:1; /* RMII ref clock direction */
+ unsigned miirate:3; /* xMII interface clock rate */
+ unsigned miimode:4; /* xMII interface mode */
+ } bits;
+ u16 val;
+ };
+};
+
+enum ltq_mii_mii_cfg_miirate {
+ LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0,
+ LTQ_MII_MII_CFG_MIIRATE_M25 = 1,
+ LTQ_MII_MII_CFG_MIIRATE_M125 = 2,
+ LTQ_MII_MII_CFG_MIIRATE_M50 = 3,
+ LTQ_MII_MII_CFG_MIIRATE_AUTO = 4,
+};
+
+enum ltq_mii_mii_cfg_miimode {
+ LTQ_MII_MII_CFG_MIIMODE_MIIP = 0,
+ LTQ_MII_MII_CFG_MIIMODE_MIIM = 1,
+ LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2,
+ LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3,
+ LTQ_MII_MII_CFG_MIIMODE_RGMII = 4,
+};
+
+struct ltq_eth_priv {
+ struct ltq_dma_device dma_dev;
+ struct mii_dev *bus;
+ struct eth_device *dev;
+ struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
+ int rx_num;
+ int tx_num;
+};
+
+static struct vr9_switch_regs *switch_regs =
+ (struct vr9_switch_regs *) CKSEG1ADDR(LTQ_SWITCH_BASE);
+
+static inline void vr9_switch_sync(void)
+{
+ __asm__("sync");
+}
+
+static inline int vr9_switch_mdio_is_busy(void)
+{
+ u32 mdio_ctrl = ltq_readl(&switch_regs->mdio.mdio_ctrl);
+
+ return mdio_ctrl & MDIO_CTRL_MBUSY;
+}
+
+static inline void vr9_switch_mdio_poll(void)
+{
+ while (vr9_switch_mdio_is_busy())
+ cpu_relax();
+}
+
+static int vr9_switch_mdio_read(struct mii_dev *bus, int phyad, int devad,
+ int regad)
+{
+ u32 mdio_ctrl;
+ int retval;
+
+ mdio_ctrl = MDIO_CTRL_OP_READ |
+ ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
+ (regad & MDIO_CTRL_REGAD_MASK);
+
+ vr9_switch_mdio_poll();
+ ltq_writel(&switch_regs->mdio.mdio_ctrl, mdio_ctrl);
+ vr9_switch_mdio_poll();
+ retval = ltq_readl(&switch_regs->mdio.mdio_read);
+
+ return retval;
+}
+
+static int vr9_switch_mdio_write(struct mii_dev *bus, int phyad, int devad,
+ int regad, u16 val)
+{
+ u32 mdio_ctrl;
+
+ mdio_ctrl = MDIO_CTRL_OP_WRITE |
+ ((phyad << MDIO_CTRL_PHYAD_SHIFT) & MDIO_CTRL_PHYAD_MASK) |
+ (regad & MDIO_CTRL_REGAD_MASK);
+
+ vr9_switch_mdio_poll();
+ ltq_writel(&switch_regs->mdio.mdio_write, val);
+ ltq_writel(&switch_regs->mdio.mdio_ctrl, mdio_ctrl);
+
+ return 0;
+}
+
+static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
+{
+ struct ltq_mdio_phy_addr_reg phy_addr_reg;
+ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
+
+ phy_addr_reg.val = ltq_readl(to_mdio_phyaddr(switch_regs, num));
+
+ switch (num) {
+ case 0:
+ case 1:
+ case 5:
+ mii_cfg_reg.val = ltq_readl(to_mii_miicfg(switch_regs, num));
+ break;
+ default:
+ mii_cfg_reg.val = 0;
+ break;
+ }
+
+ phy_addr_reg.bits.addr = phydev->addr;
+
+ if (phydev->link)
+ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP;
+ else
+ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
+
+ switch (phydev->speed) {
+ case SPEED_1000:
+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1;
+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125;
+ break;
+ case SPEED_100:
+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100;
+ switch (mii_cfg_reg.bits.miimode) {
+ case LTQ_MII_MII_CFG_MIIMODE_RMIIM:
+ case LTQ_MII_MII_CFG_MIIMODE_RMIIP:
+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50;
+ break;
+ default:
+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25;
+ break;
+ }
+ break;
+ default:
+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
+ break;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL)
+ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE;
+ else
+ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
+
+ ltq_writel(to_mdio_phyaddr(switch_regs, num), phy_addr_reg.val);
+
+ switch (num) {
+ case 0:
+ case 1:
+ case 5:
+ ltq_writel(to_mii_miicfg(switch_regs, num), mii_cfg_reg.val);
+ break;
+ default:
+ break;
+ }
+}
+
+static inline u8 *ltq_eth_rx_packet_align(int rx_num)
+{
+ u8 *packet = (u8 *) NetRxPackets[rx_num];
+
+ /*
+ * IP header needs
+ */
+ return packet + LTQ_ETH_IP_ALIGN;
+}
+
+static int ltq_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ struct phy_device *phydev;
+ int i;
+
+ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
+ phydev = priv->phymap[i];
+ if (!phydev)
+ continue;
+
+ phy_startup(phydev);
+ ltq_eth_gmac_update(phydev, i);
+ }
+
+ for (i = 0; i < LTQ_ETH_RX_BUFFER_CNT; i++)
+ ltq_dma_rx_map(dma_dev, i, ltq_eth_rx_packet_align(i),
+ LTQ_ETH_RX_DATA_SIZE);
+
+ ltq_dma_enable(dma_dev);
+
+ priv->rx_num = 0;
+ priv->tx_num = 0;
+
+ return 0;
+}
+
+static void ltq_eth_halt(struct eth_device *dev)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ struct phy_device *phydev;
+ int i;
+
+ ltq_dma_reset(dma_dev);
+
+ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) {
+ phydev = priv->phymap[i];
+ if (!phydev)
+ continue;
+
+ phy_shutdown(phydev);
+ phydev->link = 0;
+ ltq_eth_gmac_update(phydev, i);
+ }
+}
+
+static int ltq_eth_send(struct eth_device *dev, void *packet, int length)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+
+#if 0
+ printf("%s: packet %p, len %d\n", __func__, packet, length);
+#endif
+
+ ltq_dma_tx_map(dma_dev, priv->tx_num, packet, length, 10);
+ priv->tx_num = (priv->tx_num + 1) % LTQ_ETH_TX_BUFFER_CNT;
+
+ return 0;
+}
+
+static int ltq_eth_recv(struct eth_device *dev)
+{
+ struct ltq_eth_priv *priv = dev->priv;
+ struct ltq_dma_device *dma_dev = &priv->dma_dev;
+ u8 *packet;
+ int len;
+
+ if (!ltq_dma_rx_poll(dma_dev, priv->rx_num))
+ return 0;
+
+#if 0
+ printf("%s: rx_num %d\n", __func__, priv->rx_num);
+#endif
+
+ len = ltq_dma_rx_length(dma_dev, priv->rx_num);
+ packet = ltq_eth_rx_packet_align(priv->rx_num);
+
+#if 0
+ printf("%s: received: packet %p, len %u, rx_num %d\n",
+ __func__, packet, len, priv->rx_num);
+#endif
+
+ if (len)
+ NetReceive(packet, len);
+
+ ltq_dma_rx_map(dma_dev, priv->rx_num, packet,
+ LTQ_ETH_RX_DATA_SIZE);
+
+ priv->rx_num = (priv->rx_num + 1) % LTQ_ETH_RX_BUFFER_CNT;
+
+ return 0;
+}
+
+static void ltq_eth_gmac_init(int num)
+{
+ struct ltq_mdio_phy_addr_reg phy_addr_reg;
+ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
+
+ /* Reset PHY status to link down */
+ phy_addr_reg.val = ltq_readl(to_mdio_phyaddr(switch_regs, num));
+ phy_addr_reg.bits.addr = num;
+ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
+ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
+ ltq_writel(to_mdio_phyaddr(switch_regs, num), phy_addr_reg.val);
+
+ /* Reset and disable MII interface */
+ switch (num) {
+ case 0:
+ case 1:
+ case 5:
+ mii_cfg_reg.val = ltq_readl(to_mii_miicfg(switch_regs, num));
+ mii_cfg_reg.bits.en = 0;
+ mii_cfg_reg.bits.res = 1;
+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
+ ltq_writel(to_mii_miicfg(switch_regs, num), mii_cfg_reg.val);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * - enable frame checksum generation
+ * - enable padding of short frames
+ * - disable flow control
+ */
+ ltq_writel(to_mac_ctrl(switch_regs, num, 0),
+ MAC_CTRL0_PADEN | MAC_CTRL0_FCS | MAC_CTRL0_FCON_NONE);
+
+ vr9_switch_sync();
+}
+
+static void ltq_eth_pmac_init(void)
+{
+ /*
+ * WAR: buffer congestion:
+ * - shorten preambel to 1 byte
+ * - set TX IPG to 7 bytes
+ */
+#if 1
+ ltq_writel(to_mac_ctrl(switch_regs, LTQ_ETHSW_PMAC, 1),
+ MAC_CTRL1_SHORTPRE | 7);
+#endif
+
+ /*
+ * WAR: systematical concept weakness ACM bug
+ * - set maximum number of used buffer segments to 254
+ * - soft-reset BM FSQM
+ */
+#if 1
+ ltq_writel(&switch_regs->bm.core.fsqm_gctrl, 253);
+ ltq_setbits(&switch_regs->bm.core.gctrl, BM_GCTRL_F_SRES);
+ ltq_clrbits(&switch_regs->bm.core.gctrl, BM_GCTRL_F_SRES);
+#endif
+
+ /*
+ * WAR: switch MAC drop bug
+ */
+#if 1
+ ltq_writel(to_pce_tbl_key(switch_regs, 0), 0xf);
+ ltq_writel(to_pce_tbl_value(switch_regs, 0), 0x40);
+ ltq_writel(&switch_regs->pce.core.tbl_addr, 0x3);
+ ltq_writel(&switch_regs->pce.core.tbl_ctrl, 0x902f);
+#endif
+
+ /*
+ * Configure frame header control:
+ * - enable flow control
+ * - enable CRC check for packets from DMA to PMAC
+ * - remove special tag from packets from PMAC to DMA
+ * - add CRC for packets from DMA to PMAC
+ */
+ ltq_writel(&switch_regs->pmac.hd_ctl, /*PMAC_HD_CTL_FC |*/
+ PMAC_HD_CTL_CCRC | PMAC_HD_CTL_RST | PMAC_HD_CTL_AC |
+ PMAC_HD_CTL_RC);
+
+#if 1
+ ltq_writel(&switch_regs->pmac.rx_ipg, 0x8b);
+#endif
+
+ /*
+ * - enable frame checksum generation
+ * - enable padding of short frames
+ * - disable flow control
+ */
+ ltq_writel(to_mac_ctrl(switch_regs, LTQ_ETHSW_PMAC, 0),
+ MAC_CTRL0_PADEN | MAC_CTRL0_FCS | MAC_CTRL0_FCON_NONE);
+
+ vr9_switch_sync();
+}
+
+static void ltq_eth_hw_init(void)
+{
+ int i;
+
+ /* Power up ethernet and switch subsystems */
+ ltq_pm_enable(LTQ_PM_ETH);
+
+ /* Reset ethernet and switch subsystems */
+#if 0
+ ltq_reset_once(LTQ_RESET_ETH, 10);
+#endif
+
+ /* Enable switch macro */
+ ltq_setbits(&switch_regs->mdio.glob_ctrl, MDIO_GLOB_CTRL_SE);
+
+ /* Disable MDIO auto-polling for all ports */
+ ltq_writel(&switch_regs->mdio.mdc_cfg_0, 0);
+
+ /*
+ * Enable and set MDIO management clock to 2.5 MHz. This is the
+ * maximum clock for FE PHYs.
+ * Formula for clock is:
+ *
+ * 50 MHz
+ * x = ----------- - 1
+ * 2 * f_MDC
+ */
+ ltq_writel(&switch_regs->mdio.mdc_cfg_1, MDIO_MDC_CFG1_RES |
+ MDIO_MDC_CFG1_MCEN | 5);
+
+ vr9_switch_sync();
+
+ /* Init MAC connected to CPU */
+ ltq_eth_pmac_init();
+
+ /* Init MACs connected to external MII interfaces */
+ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++)
+ ltq_eth_gmac_init(i);
+}
+
+static void ltq_eth_port_config(struct ltq_eth_priv *priv,
+ const struct ltq_eth_port_config *port)
+{
+ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
+ struct phy_device *phydev;
+ int setup_gpio = 0;
+
+ switch (port->num) {
+ case 0: /* xMII0 */
+ case 1: /* xMII1 */
+ mii_cfg_reg.val = ltq_readl(to_mii_miicfg(switch_regs,
+ port->num));
+ mii_cfg_reg.bits.en = port->flags ? 1 : 0;
+
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ if (port->flags & LTQ_ETH_PORT_PHY)
+ /* MII MAC mode, connected to external PHY */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_MIIM;
+ else
+ /* MII PHY mode, connected to external MAC */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_MIIP;
+ setup_gpio = 1;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if (port->flags & LTQ_ETH_PORT_PHY)
+ /* RMII MAC mode, connected to external PHY */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_RMIIM;
+ else
+ /* RMII PHY mode, connected to external MAC */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_RMIIP;
+ setup_gpio = 1;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* RGMII MAC mode, connected to external PHY */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_RGMII;
+ setup_gpio = 1;
+
+ /* RGMII clock delays */
+ ltq_writel(to_mii_pcdu(switch_regs, port->num),
+ port->rgmii_rx_delay << PCDU_RXDLY_SHIFT |
+ port->rgmii_tx_delay);
+ break;
+ default:
+ break;
+ }
+
+ ltq_writel(to_mii_miicfg(switch_regs, port->num),
+ mii_cfg_reg.val);
+ break;
+ case 2: /* internal GPHY0 */
+ case 3: /* internal GPHY0 */
+ case 4: /* internal GPHY1 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ setup_gpio = 1;
+ break;
+ default:
+ break;
+ }
+ break;
+ case 5: /* internal GPHY1 or xMII2 */
+ mii_cfg_reg.val = ltq_readl(to_mii_miicfg(switch_regs,
+ port->num));
+ mii_cfg_reg.bits.en = port->flags ? 1 : 0;
+
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ /* MII MAC mode, connected to internal GPHY */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_MIIM;
+ setup_gpio = 1;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* RGMII MAC mode, connected to external PHY */
+ mii_cfg_reg.bits.miimode =
+ LTQ_MII_MII_CFG_MIIMODE_RGMII;
+ setup_gpio = 1;
+
+ /* RGMII clock delays */
+ ltq_writel(to_mii_pcdu(switch_regs, port->num),
+ port->rgmii_rx_delay << PCDU_RXDLY_SHIFT |
+ port->rgmii_tx_delay);
+ break;
+ default:
+ break;
+ }
+
+ ltq_writel(to_mii_miicfg(switch_regs, port->num),
+ mii_cfg_reg.val);
+ break;
+ default:
+ break;
+ }
+
+ /* Setup GPIOs for MII with external PHYs/MACs */
+ if (setup_gpio) {
+ /* MII/MDIO */
+ gpio_set_altfunc(42, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR,
+ GPIO_DIR_OUT);
+ /* MII/MDC */
+ gpio_set_altfunc(43, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR,
+ GPIO_DIR_OUT);
+ }
+
+ /* Connect to internal/external PHYs */
+ if (port->flags & LTQ_ETH_PORT_PHY) {
+ phydev = phy_connect(priv->bus, port->phy_addr, priv->dev,
+ port->phy_if);
+ if (phydev)
+ phy_config(phydev);
+
+ priv->phymap[port->num] = phydev;
+ }
+}
+
+int ltq_eth_initialize(const struct ltq_eth_board_config *board_config)
+{
+ struct eth_device *dev;
+ struct mii_dev *bus;
+ struct ltq_eth_priv *priv;
+ struct ltq_dma_device *dma_dev;
+ int i, ret;
+
+ build_check_vr9_registers();
+
+ ltq_dma_init();
+ ltq_eth_hw_init();
+
+ dev = calloc(1, sizeof(struct eth_device));
+ if (!dev)
+ return -1;
+
+ priv = calloc(1, sizeof(struct ltq_eth_priv));
+ if (!priv)
+ return -1;
+
+ bus = mdio_alloc();
+ if (!bus)
+ return -1;
+
+ sprintf(dev->name, LTQ_ETH_DRV_NAME);
+ dev->priv = priv;
+ dev->init = ltq_eth_init;
+ dev->halt = ltq_eth_halt;
+ dev->recv = ltq_eth_recv;
+ dev->send = ltq_eth_send;
+
+ sprintf(bus->name, LTQ_MDIO_DRV_NAME);
+ bus->read = vr9_switch_mdio_read;
+ bus->write = vr9_switch_mdio_write;
+ bus->priv = priv;
+
+ dma_dev = &priv->dma_dev;
+ dma_dev->port = 0;
+ dma_dev->rx_chan.chan_no = 0;
+ dma_dev->rx_chan.class = 0;
+ dma_dev->rx_chan.num_desc = LTQ_ETH_RX_BUFFER_CNT;
+ dma_dev->rx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+ dma_dev->rx_burst_len = LTQ_DMA_BURST_2WORDS;
+ dma_dev->tx_chan.chan_no = 1;
+ dma_dev->tx_chan.class = 0;
+ dma_dev->tx_chan.num_desc = LTQ_ETH_TX_BUFFER_CNT;
+ dma_dev->tx_endian_swap = LTQ_DMA_ENDIANESS_B3_B2_B1_B0;
+ dma_dev->tx_burst_len = LTQ_DMA_BURST_2WORDS;
+
+ priv->bus = bus;
+ priv->dev = dev;
+
+ ret = ltq_dma_register(dma_dev);
+ if (ret)
+ return -1;
+
+ ret = mdio_register(bus);
+ if (ret)
+ return -1;
+
+ ret = eth_register(dev);
+ if (ret)
+ return -1;
+
+ for (i = 0; i < board_config->num_ports; i++)
+ ltq_eth_port_config(priv, &board_config->ports[i]);
+
+ return 0;
+}
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,6 +20,7 @@ COBJS-$(CONFIG_PHY_BROADCOM) += broadcom
COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o
COBJS-$(CONFIG_PHY_ET1011C) += et1011c.o
COBJS-$(CONFIG_PHY_ICPLUS) += icplus.o
+COBJS-$(CONFIG_PHY_LANTIQ) += lantiq.o
COBJS-$(CONFIG_PHY_LXT) += lxt.o
COBJS-$(CONFIG_PHY_MARVELL) += marvell.o
COBJS-$(CONFIG_PHY_MICREL) += micrel.o
--- /dev/null
+++ b/drivers/net/phy/lantiq.c
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define DEBUG
+
+#include <common.h>
+#include <miiphy.h>
+
+#define ADVERTIZE_MPD (1 << 10)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Update link status.
+ *
+ * Based on genphy_update_link in phylib.c
+ */
+static int ltq_phy_update_link(struct phy_device *phydev)
+{
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ /*
+ * If we already saw the link up, and it hasn't gone down, then
+ * we don't need to wait for autoneg again
+ */
+ if (phydev->link && mii_reg & BMSR_LSTATUS)
+ return 0;
+
+ if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
+ phydev->link = 0;
+ return 0;
+ } else {
+ /* Read the link a second time to clear the latched state */
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ if (mii_reg & BMSR_LSTATUS)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Update speed and duplex.
+ *
+ * Based on genphy_parse_link in phylib.c
+ */
+static int ltq_phy_parse_link(struct phy_device *phydev)
+{
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ /* We're using autonegotiation */
+ if (mii_reg & BMSR_ANEGCAPABLE) {
+ u32 lpa = 0;
+ u32 gblpa = 0;
+
+ /* Check for gigabit capability */
+ if (mii_reg & BMSR_ERCAP) {
+ /* We want a list of states supported by
+ * both PHYs in the link
+ */
+ gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000);
+ gblpa &= phy_read(phydev,
+ MDIO_DEVAD_NONE, MII_CTRL1000) << 2;
+ }
+
+ /* Set the baseline so we only have to set them
+ * if they're different
+ */
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+
+ /* Check the gigabit fields */
+ if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ phydev->speed = SPEED_1000;
+
+ if (gblpa & PHY_1000BTSR_1000FD)
+ phydev->duplex = DUPLEX_FULL;
+
+ /* We're done! */
+ return 0;
+ }
+
+ lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
+ lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA);
+
+ if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+
+ } else if (lpa & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else {
+ u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ }
+
+ return 0;
+}
+
+static int ltq_phy_config(struct phy_device *phydev)
+{
+ u16 val;
+
+ /* Advertise as Multi-port device */
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+ val |= ADVERTIZE_MPD;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, val);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int ltq_phy_startup(struct phy_device *phydev)
+{
+ /*
+ * Update PHY status immediately without any delays as genphy_startup
+ * does because VRX200 switch needs to be configured dependent
+ * on this information.
+ */
+ ltq_phy_update_link(phydev);
+ ltq_phy_parse_link(phydev);
+
+ debug("ltq_phy: addr %d, link %d, speed %d, duplex %d\n",
+ phydev->addr, phydev->link, phydev->speed, phydev->duplex);
+
+ return 0;
+}
+
+static struct phy_driver xrx_11g_13_driver = {
+ .name = "Lantiq XWAY XRX PHY11G v1.3 and earlier",
+ .uid = 0x030260D0,
+ .mask = 0xFFFFFFF0,
+ .features = PHY_GBIT_FEATURES,
+ .config = ltq_phy_config,
+ .startup = ltq_phy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+static struct phy_driver xrx_11g_14_driver = {
+ .name = "Lantiq XWAY XRX PHY11G v1.4 and later",
+ .uid = 0xd565a408,
+ .mask = 0xFFFFFFF8,
+ .features = PHY_GBIT_FEATURES,
+ .config = ltq_phy_config,
+ .startup = ltq_phy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+static struct phy_driver xrx_22f_14_driver = {
+ .name = "Lantiq XWAY XRX PHY22F v1.4 and later",
+ .uid = 0xd565a418,
+ .mask = 0xFFFFFFF8,
+ .features = PHY_BASIC_FEATURES,
+ .config = ltq_phy_config,
+ .startup = ltq_phy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+static struct phy_driver pef7071_driver = {
+ .name = "Lantiq XWAY PEF7071",
+ .uid = 0xd565a400,
+ .mask = 0xFFFFFFFF,
+ .features = PHY_GBIT_FEATURES,
+ .config = ltq_phy_config,
+ .startup = ltq_phy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+static struct phy_driver xrx_genphy_driver = {
+ .name = "Generic PHY at Lantiq XWAY XRX switch",
+ .uid = 0,
+ .mask = 0,
+ .features = 0,
+ .config = genphy_config,
+ .startup = ltq_phy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+int phy_lantiq_init(void)
+{
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ xrx_11g_13_driver.config = ltq_phy_config;
+ xrx_11g_13_driver.startup = ltq_phy_startup;
+ xrx_11g_13_driver.shutdown = genphy_shutdown;
+ xrx_11g_13_driver.name += gd->reloc_off;
+
+ xrx_11g_14_driver.config = ltq_phy_config;
+ xrx_11g_14_driver.startup = ltq_phy_startup;
+ xrx_11g_14_driver.shutdown = genphy_shutdown;
+ xrx_11g_14_driver.name += gd->reloc_off;
+
+ xrx_22f_14_driver.config = ltq_phy_config;
+ xrx_22f_14_driver.startup = ltq_phy_startup;
+ xrx_22f_14_driver.shutdown = genphy_shutdown;
+ xrx_22f_14_driver.name += gd->reloc_off;
+
+ pef7071_driver.config = ltq_phy_config;
+ pef7071_driver.startup = ltq_phy_startup;
+ pef7071_driver.shutdown = genphy_shutdown;
+ pef7071_driver.name += gd->reloc_off;
+
+ xrx_genphy_driver.config = genphy_config;
+ xrx_genphy_driver.startup = ltq_phy_startup;
+ xrx_genphy_driver.shutdown = genphy_shutdown;
+ xrx_genphy_driver.name += gd->reloc_off;
+#endif
+
+ phy_register(&xrx_11g_13_driver);
+ phy_register(&xrx_11g_14_driver);
+ phy_register(&xrx_22f_14_driver);
+ phy_register(&pef7071_driver);
+ phy_register(&xrx_genphy_driver);
+
+ return 0;
+}
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -16,9 +16,10 @@
#include <command.h>
#include <miiphy.h>
#include <phy.h>
-#include <errno.h>
#include <linux/err.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Generic PHY support and helper functions */
/**
@@ -440,6 +441,16 @@ static LIST_HEAD(phy_drivers);
int phy_init(void)
{
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ INIT_LIST_HEAD(&phy_drivers);
+
+ genphy_driver.config = genphy_config;
+ genphy_driver.startup = genphy_startup;
+ genphy_driver.shutdown = genphy_shutdown;
+
+ genphy_driver.name += gd->reloc_off;
+#endif
+
#ifdef CONFIG_PHY_ATHEROS
phy_atheros_init();
#endif
@@ -455,6 +466,9 @@ int phy_init(void)
#ifdef CONFIG_PHY_ICPLUS
phy_icplus_init();
#endif
+#ifdef CONFIG_PHY_LANTIQ
+ phy_lantiq_init();
+#endif
#ifdef CONFIG_PHY_LXT
phy_lxt_init();
#endif
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -24,6 +24,7 @@ COBJS-$(CONFIG_SYS_NS16550_SERIAL) += se
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
+COBJS-$(CONFIG_LANTIQ_SERIAL) += serial_lantiq.o
COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
COBJS-$(CONFIG_MXC_UART) += serial_mxc.o
COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -160,6 +160,7 @@ serial_initfunc(sa1100_serial_initialize
serial_initfunc(sh_serial_initialize);
serial_initfunc(arm_dcc_initialize);
serial_initfunc(mxs_auart_initialize);
+serial_initfunc(ltq_serial_initialize);
/**
* serial_register() - Register serial driver with serial driver core
@@ -253,6 +254,7 @@ void serial_initialize(void)
sh_serial_initialize();
arm_dcc_initialize();
mxs_auart_initialize();
+ ltq_serial_initialize();
serial_assign(default_serial_console()->name);
}
--- /dev/null
+++ b/drivers/serial/serial_lantiq.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <serial.h>
+#include <asm/errno.h>
+#include <asm/arch/soc.h>
+#include <asm/lantiq/clk.h>
+#include <asm/lantiq/io.h>
+
+#if CONFIG_CONSOLE_ASC == 0
+#define LTQ_ASC_BASE LTQ_ASC0_BASE
+#else
+#define LTQ_ASC_BASE LTQ_ASC1_BASE
+#endif
+
+#define LTQ_ASC_ID_TXFS_SHIFT 24
+#define LTQ_ASC_ID_TXFS_MASK (0x3F << LTQ_ASC_ID_TXFS_SHIFT)
+#define LTQ_ASC_ID_RXFS_SHIFT 16
+#define LTQ_ASC_ID_RXFS_MASK (0x3F << LTQ_ASC_ID_RXFS_SHIFT)
+
+#define LTQ_ASC_MCON_R (1 << 15)
+#define LTQ_ASC_MCON_FDE (1 << 9)
+
+#define LTQ_ASC_WHBSTATE_SETREN (1 << 1)
+#define LTQ_ASC_WHBSTATE_CLRREN (1 << 0)
+
+#define LTQ_ASC_RXFCON_RXFITL_SHIFT 8
+#define LTQ_ASC_RXFCON_RXFITL_MASK (0x3F << LTQ_ASC_RXFCON_RXFITL_SHIFT)
+#define LTQ_ASC_RXFCON_RXFITL_RXFFLU (1 << 1)
+#define LTQ_ASC_RXFCON_RXFITL_RXFEN (1 << 0)
+
+#define LTQ_ASC_TXFCON_TXFITL_SHIFT 8
+#define LTQ_ASC_TXFCON_TXFITL_MASK (0x3F << LTQ_ASC_TXFCON_TXFITL_SHIFT)
+#define LTQ_ASC_TXFCON_TXFITL_TXFFLU (1 << 1)
+#define LTQ_ASC_TXFCON_TXFITL_TXFEN (1 << 0)
+
+#define LTQ_ASC_FSTAT_TXFREE_SHIFT 24
+#define LTQ_ASC_FSTAT_TXFREE_MASK (0x3F << LTQ_ASC_FSTAT_TXFREE_SHIFT)
+#define LTQ_ASC_FSTAT_RXFREE_SHIFT 16
+#define LTQ_ASC_FSTAT_RXFREE_MASK (0x3F << LTQ_ASC_FSTAT_RXFREE_SHIFT)
+#define LTQ_ASC_FSTAT_TXFFL_SHIFT 8
+#define LTQ_ASC_FSTAT_TXFFL_MASK (0x3F << LTQ_ASC_FSTAT_TXFFL_SHIFT)
+#define LTQ_ASC_FSTAT_RXFFL_MASK 0x3F
+
+#ifdef __BIG_ENDIAN
+#define LTQ_ASC_RBUF_OFFSET 3
+#define LTQ_ASC_TBUF_OFFSET 3
+#else
+#define LTQ_ASC_RBUF_OFFSET 0
+#define LTQ_ASC_TBUF_OFFSET 0
+#endif
+
+struct ltq_asc_regs {
+ u32 clc;
+ u32 pisel;
+ u32 id;
+ u32 rsvd0;
+ u32 mcon;
+ u32 state;
+ u32 whbstate;
+ u32 rsvd1;
+ u8 tbuf[4];
+ u8 rbuf[4];
+ u32 rsvd2[2];
+ u32 abcon;
+ u32 abstat;
+ u32 whbabcon;
+ u32 whbabstat;
+ u32 rxfcon;
+ u32 txfcon;
+ u32 fstat;
+ u32 rsvd3;
+ u32 bg;
+ u32 bg_timer;
+ u32 fdv;
+ u32 pmw;
+ u32 modcon;
+ u32 modstat;
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ltq_asc_regs *ltq_asc_regs =
+ (struct ltq_asc_regs *) CKSEG1ADDR(LTQ_ASC_BASE);
+
+static int ltq_serial_init(void)
+{
+ /* Set clock divider for normal run mode to 1 and enable module */
+ ltq_writel(&ltq_asc_regs->clc, 0x100);
+
+ /* Reset MCON register */
+ ltq_writel(&ltq_asc_regs->mcon, 0);
+
+ /* Use Port A as receiver input */
+ ltq_writel(&ltq_asc_regs->pisel, 0);
+
+ /* Enable and flush RX/TX FIFOs */
+ ltq_setbits(&ltq_asc_regs->rxfcon,
+ LTQ_ASC_RXFCON_RXFITL_RXFFLU | LTQ_ASC_RXFCON_RXFITL_RXFEN);
+ ltq_setbits(&ltq_asc_regs->txfcon,
+ LTQ_ASC_TXFCON_TXFITL_TXFFLU | LTQ_ASC_TXFCON_TXFITL_TXFEN);
+
+ serial_setbrg();
+
+ /* Disable error flags, enable receiver */
+ ltq_writel(&ltq_asc_regs->whbstate, LTQ_ASC_WHBSTATE_SETREN);
+
+ return 0;
+}
+
+/*
+ * fdv asc_clk
+ * Baudrate = ----- * -------------
+ * 512 16 * (bg + 1)
+ */
+static void ltq_serial_calc_br_fdv(unsigned long asc_clk,
+ unsigned long baudrate, u16 *fdv,
+ u16 *bg)
+{
+ const u32 c = asc_clk / (16 * 512);
+ u32 diff1, diff2;
+ u32 bg_calc, br_calc, i;
+
+ diff1 = baudrate;
+ for (i = 512; i > 0; i--) {
+ /* Calc bg for current fdv value */
+ bg_calc = i * c / baudrate;
+
+ /* Impossible baudrate */
+ if (!bg_calc)
+ return;
+
+ /*
+ * Calc diff to target baudrate dependent on current
+ * bg and fdv values
+ */
+ br_calc = i * c / bg_calc;
+ if (br_calc > baudrate)
+ diff2 = br_calc - baudrate;
+ else
+ diff2 = baudrate - br_calc;
+
+ /* Perfect values found */
+ if (diff2 == 0) {
+ *fdv = i;
+ *bg = bg_calc - 1;
+ return;
+ }
+
+ if (diff2 < diff1) {
+ *fdv = i;
+ *bg = bg_calc - 1;
+ diff1 = diff2;
+ }
+ }
+}
+
+static void ltq_serial_setbrg(void)
+{
+ unsigned long asc_clk, baudrate;
+ u16 bg = 0;
+ u16 fdv = 511;
+
+ /* ASC clock is same as FPI clock with CLC.RMS = 1 */
+ asc_clk = ltq_get_bus_clock();
+ baudrate = gd->baudrate;
+
+ /* Calculate FDV and BG values */
+ ltq_serial_calc_br_fdv(asc_clk, baudrate, &fdv, &bg);
+
+ /* Disable baudrate generator */
+ ltq_clrbits(&ltq_asc_regs->mcon, LTQ_ASC_MCON_R);
+
+ /* Enable fractional divider */
+ ltq_setbits(&ltq_asc_regs->mcon, LTQ_ASC_MCON_FDE);
+
+ /* Set fdv and bg values */
+ ltq_writel(&ltq_asc_regs->fdv, fdv);
+ ltq_writel(&ltq_asc_regs->bg, bg);
+
+ /* Enable baudrate generator */
+ ltq_setbits(&ltq_asc_regs->mcon, LTQ_ASC_MCON_R);
+}
+
+static unsigned int ltq_serial_tx_free(void)
+{
+ unsigned int txfree;
+
+ txfree = (ltq_readl(&ltq_asc_regs->fstat) &
+ LTQ_ASC_FSTAT_TXFREE_MASK) >>
+ LTQ_ASC_FSTAT_TXFREE_SHIFT;
+
+ return txfree;
+}
+
+static unsigned int ltq_serial_rx_fill(void)
+{
+ unsigned int rxffl;
+
+ rxffl = ltq_readl(&ltq_asc_regs->fstat) & LTQ_ASC_FSTAT_RXFFL_MASK;
+
+ return rxffl;
+}
+
+static void ltq_serial_tx(const char c)
+{
+ ltq_writeb(&ltq_asc_regs->tbuf[LTQ_ASC_TBUF_OFFSET], c);
+}
+
+static u8 ltq_serial_rx(void)
+{
+ return ltq_readb(&ltq_asc_regs->rbuf[LTQ_ASC_RBUF_OFFSET]);
+}
+
+static void ltq_serial_putc(const char c)
+{
+ if (c == '\n')
+ ltq_serial_putc('\r');
+
+ while (!ltq_serial_tx_free())
+ ;
+
+ ltq_serial_tx(c);
+}
+
+static int ltq_serial_getc(void)
+{
+ while (!ltq_serial_rx_fill())
+ ;
+
+ return ltq_serial_rx();
+}
+
+static int ltq_serial_tstc(void)
+{
+ return (0 != ltq_serial_rx_fill());
+}
+
+static struct serial_device ltq_serial_drv = {
+ .name = "ltq_serial",
+ .start = ltq_serial_init,
+ .stop = NULL,
+ .setbrg = ltq_serial_setbrg,
+ .putc = ltq_serial_putc,
+ .puts = default_serial_puts,
+ .getc = ltq_serial_getc,
+ .tstc = ltq_serial_tstc,
+};
+
+void ltq_serial_initialize(void)
+{
+ serial_register(&ltq_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+ return &ltq_serial_drv;
+}
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -25,6 +25,7 @@ COBJS-$(CONFIG_DAVINCI_SPI) += davinci_s
COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
COBJS-$(CONFIG_ICH_SPI) += ich.o
COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
+COBJS-$(CONFIG_LANTIQ_SPI) += lantiq_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
--- /dev/null
+++ b/drivers/spi/lantiq_spi.c
@@ -0,0 +1,666 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+#include <watchdog.h>
+#include <asm/gpio.h>
+#include <asm/lantiq/io.h>
+#include <asm/lantiq/clk.h>
+#include <asm/lantiq/pm.h>
+#include <asm/arch/soc.h>
+
+#define LTQ_SPI_CLC_RMC_SHIFT 8
+#define LTQ_SPI_CLC_RMC_MASK (0xFF << LTQ_SPI_CLC_RMC_SHIFT)
+#define LTQ_SPI_CLC_DISS (1 << 1)
+#define LTQ_SPI_CLC_DISR 1
+
+#define LTQ_SPI_ID_TXFS_SHIFT 24
+#define LTQ_SPI_ID_TXFS_MASK (0x3F << LTQ_SPI_ID_TXFS_SHIFT)
+#define LTQ_SPI_ID_RXFS_SHIFT 16
+#define LTQ_SPI_ID_RXFS_MASK (0x3F << LTQ_SPI_ID_RXFS_SHIFT)
+
+#define LTQ_SPI_CON_ENBV (1 << 22)
+#define LTQ_SPI_CON_BM_SHIFT 16
+#define LTQ_SPI_CON_BM_MASK (0x1F << LTQ_SPI_CON_BM_SHIFT)
+#define LTQ_SPI_CON_IDLE (1 << 23)
+#define LTQ_SPI_CON_RUEN (1 << 12)
+#define LTQ_SPI_CON_AEN (1 << 10)
+#define LTQ_SPI_CON_REN (1 << 9)
+#define LTQ_SPI_CON_TEN (1 << 8)
+#define LTQ_SPI_CON_LB (1 << 7)
+#define LTQ_SPI_CON_PO (1 << 6)
+#define LTQ_SPI_CON_PH (1 << 5)
+#define LTQ_SPI_CON_HB (1 << 4)
+#define LTQ_SPI_CON_RXOFF (1 << 1)
+#define LTQ_SPI_CON_TXOFF 1
+
+#define LTQ_SPI_STAT_RXBV_SHIFT 28
+#define LTQ_SPI_STAT_RXBV_MASK (0x7 << LTQ_SPI_STAT_RXBV_SHIFT)
+#define LTQ_SPI_STAT_BSY (1 << 13)
+
+#define LTQ_SPI_WHBSTATE_SETMS (1 << 3)
+#define LTQ_SPI_WHBSTATE_CLRMS (1 << 2)
+#define LTQ_SPI_WHBSTATE_SETEN (1 << 1)
+#define LTQ_SPI_WHBSTATE_CLREN 1
+#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
+
+#define LTQ_SPI_TXFCON_TXFLU (1 << 1)
+#define LTQ_SPI_TXFCON_TXFEN 1
+
+#define LTQ_SPI_RXFCON_RXFLU (1 << 1)
+#define LTQ_SPI_RXFCON_RXFEN 1
+
+#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
+#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
+#define LTQ_SPI_FSTAT_TXFFL_MASK (0x3f << LTQ_SPI_FSTAT_TXFFL_SHIFT)
+
+#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF
+#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF
+
+#define LTQ_SPI_GPIO_DIN 16
+#define LTQ_SPI_GPIO_DOUT 17
+#define LTQ_SPI_GPIO_CLK 18
+
+struct ltq_spi_regs {
+ __be32 clc; /* Clock control */
+ __be32 pisel; /* Port input select */
+ __be32 id; /* Identification */
+ __be32 rsvd0;
+ __be32 con; /* Control */
+ __be32 stat; /* Status */
+ __be32 whbstate; /* Write HW modified state */
+ __be32 rsvd1;
+ __be32 tb; /* Transmit buffer */
+ __be32 rb; /* Receive buffer */
+ __be32 rsvd2[2];
+ __be32 rxfcon; /* Recevie FIFO control */
+ __be32 txfcon; /* Transmit FIFO control */
+ __be32 fstat; /* FIFO status */
+ __be32 rsvd3;
+ __be32 brt; /* Baudrate timer */
+ __be32 brstat; /* Baudrate timer status */
+ __be32 rsvd4[6];
+ __be32 sfcon; /* Serial frame control */
+ __be32 sfstat; /* Serial frame status */
+ __be32 rsvd5[2];
+ __be32 gpocon; /* General purpose output control */
+ __be32 gpostat; /* General purpose output status */
+ __be32 fgpo; /* Force general purpose output */
+ __be32 rsvd6;
+ __be32 rxreq; /* Receive request */
+ __be32 rxcnt; /* Receive count */
+ __be32 rsvd7[25];
+ __be32 dmacon; /* DMA control */
+ __be32 rsvd8;
+ __be32 irnen; /* Interrupt node enable */
+ __be32 irnicr; /* Interrupt node interrupt capture */
+ __be32 irncr; /* Interrupt node control */
+};
+
+struct ltq_spi_drv_data {
+ struct ltq_spi_regs __iomem *regs;
+
+ struct spi_slave slave;
+ unsigned int max_hz;
+ unsigned int mode;
+ unsigned int tx_todo;
+ unsigned int rx_todo;
+ unsigned int rx_req;
+ unsigned int bits_per_word;
+ unsigned int speed_hz;
+ const u8 *tx;
+ u8 *rx;
+ int status;
+};
+
+static struct ltq_spi_drv_data *to_ltq_spi_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct ltq_spi_drv_data, slave);
+}
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * We do not have or want malloc in a SPI flash SPL.
+ * Neither we have to support multiple SPI slaves. Thus we put the
+ * SPI slave context in BSS for SPL builds.
+ */
+static struct ltq_spi_drv_data ltq_spi_slave;
+
+static struct ltq_spi_drv_data *ltq_spi_slave_alloc(unsigned int bus,
+ unsigned int cs)
+{
+ ltq_spi_slave.slave.bus = bus;
+ ltq_spi_slave.slave.cs = cs;
+
+ return &ltq_spi_slave;
+}
+
+static void ltq_spi_slave_free(struct spi_slave *slave)
+{
+}
+#else
+static struct ltq_spi_drv_data *ltq_spi_slave_alloc(unsigned int bus,
+ unsigned int cs)
+{
+ return spi_alloc_slave(struct ltq_spi_drv_data, bus, cs);
+}
+
+static void ltq_spi_slave_free(struct spi_slave *slave)
+{
+ struct ltq_spi_drv_data *drv;
+
+ if (slave) {
+ drv = to_ltq_spi_slave(slave);
+ free(drv);
+ }
+}
+#endif
+
+static unsigned int tx_fifo_size(struct ltq_spi_drv_data *drv)
+{
+ u32 id = ltq_readl(&drv->regs->id);
+
+ return (id & LTQ_SPI_ID_TXFS_MASK) >> LTQ_SPI_ID_TXFS_SHIFT;
+}
+
+static unsigned int rx_fifo_size(struct ltq_spi_drv_data *drv)
+{
+ u32 id = ltq_readl(&drv->regs->id);
+
+ return (id & LTQ_SPI_ID_RXFS_MASK) >> LTQ_SPI_ID_RXFS_SHIFT;
+}
+
+static unsigned int tx_fifo_level(struct ltq_spi_drv_data *drv)
+{
+ u32 fstat = ltq_readl(&drv->regs->fstat);
+
+ return (fstat & LTQ_SPI_FSTAT_TXFFL_MASK) >> LTQ_SPI_FSTAT_TXFFL_SHIFT;
+}
+
+static unsigned int rx_fifo_level(struct ltq_spi_drv_data *drv)
+{
+ u32 fstat = ltq_readl(&drv->regs->fstat);
+
+ return fstat & LTQ_SPI_FSTAT_RXFFL_MASK;
+}
+
+static unsigned int tx_fifo_free(struct ltq_spi_drv_data *drv)
+{
+ return tx_fifo_size(drv) - tx_fifo_level(drv);
+}
+
+static void hw_power_on(struct ltq_spi_drv_data *drv)
+{
+ u32 clc;
+
+ /* Power-up mdule */
+ ltq_pm_enable(LTQ_PM_SPI);
+
+ /*
+ * Set clock divider for run mode to 1 to
+ * run at same frequency as FPI bus
+ */
+ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
+ ltq_writel(&drv->regs->clc, clc);
+}
+
+static void hw_reset_fifos(struct ltq_spi_drv_data *drv)
+{
+ u32 val;
+
+ val = LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
+ ltq_writel(&drv->regs->txfcon, val);
+
+ val = LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
+ ltq_writel(&drv->regs->rxfcon, val);
+}
+
+static int hw_is_busy(struct ltq_spi_drv_data *drv)
+{
+ u32 stat = ltq_readl(&drv->regs->stat);
+
+ return stat & LTQ_SPI_STAT_BSY;
+}
+
+static void hw_enter_config_mode(struct ltq_spi_drv_data *drv)
+{
+ ltq_writel(&drv->regs->whbstate, LTQ_SPI_WHBSTATE_CLREN);
+}
+
+static void hw_enter_active_mode(struct ltq_spi_drv_data *drv)
+{
+ ltq_writel(&drv->regs->whbstate, LTQ_SPI_WHBSTATE_SETEN);
+}
+
+static void hw_setup_speed_hz(struct ltq_spi_drv_data *drv,
+ unsigned int max_speed_hz)
+{
+ unsigned int spi_hz, speed_hz, brt;
+
+ /*
+ * SPI module clock is derived from FPI bus clock dependent on
+ * divider value in CLC.RMS which is always set to 1.
+ *
+ * f_SPI
+ * baudrate = --------------
+ * 2 * (BR + 1)
+ */
+ spi_hz = ltq_get_bus_clock() / 2;
+
+ /* TODO: optimize baudrate calculation */
+ for (brt = 0; brt < 0xFFFF; brt++) {
+ speed_hz = spi_hz / (brt + 1);
+ if (speed_hz <= max_speed_hz)
+ break;
+ }
+
+ ltq_writel(&drv->regs->brt, brt);
+}
+
+static void hw_setup_bits_per_word(struct ltq_spi_drv_data *drv,
+ unsigned int bits_per_word)
+{
+ u32 bm;
+
+ /* CON.BM value = bits_per_word - 1 */
+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
+
+ ltq_clrsetbits(&drv->regs->con, LTQ_SPI_CON_BM_MASK, bm);
+}
+
+static void hw_setup_clock_mode(struct ltq_spi_drv_data *drv, unsigned int mode)
+{
+ u32 con_set = 0, con_clr = 0;
+
+ /*
+ * SPI mode mapping in CON register:
+ * Mode CPOL CPHA CON.PO CON.PH
+ * 0 0 0 0 1
+ * 1 0 1 0 0
+ * 2 1 0 1 1
+ * 3 1 1 1 0
+ */
+ if (mode & SPI_CPHA)
+ con_clr |= LTQ_SPI_CON_PH;
+ else
+ con_set |= LTQ_SPI_CON_PH;
+
+ if (mode & SPI_CPOL)
+ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
+ else
+ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
+
+ /* Set heading control */
+ if (mode & SPI_LSB_FIRST)
+ con_clr |= LTQ_SPI_CON_HB;
+ else
+ con_set |= LTQ_SPI_CON_HB;
+
+ /* Set loopback mode */
+ if (mode & SPI_LOOP)
+ con_set |= LTQ_SPI_CON_LB;
+ else
+ con_clr |= LTQ_SPI_CON_LB;
+
+ ltq_clrsetbits(&drv->regs->con, con_clr, con_set);
+}
+
+static void hw_set_rxtx(struct ltq_spi_drv_data *drv)
+{
+ u32 con;
+
+ /* Configure transmitter and receiver */
+ con = ltq_readl(&drv->regs->con);
+ if (drv->tx)
+ con &= ~LTQ_SPI_CON_TXOFF;
+ else
+ con |= LTQ_SPI_CON_TXOFF;
+
+ if (drv->rx)
+ con &= ~LTQ_SPI_CON_RXOFF;
+ else
+ con |= LTQ_SPI_CON_RXOFF;
+
+ ltq_writel(&drv->regs->con, con);
+}
+
+static void hw_init(struct ltq_spi_drv_data *drv)
+{
+ hw_power_on(drv);
+
+ /* Put controller into config mode */
+ hw_enter_config_mode(drv);
+
+ /* Disable all interrupts */
+ ltq_writel(&drv->regs->irnen, 0);
+
+ /* Clear error flags */
+ ltq_clrsetbits(&drv->regs->whbstate, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS);
+
+ /* Enable error checking, disable TX/RX */
+ ltq_writel(&drv->regs->con, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF |
+ LTQ_SPI_CON_RXOFF);
+
+ /* Setup default SPI mode */
+ drv->bits_per_word = 8;
+ drv->speed_hz = 0;
+ hw_setup_bits_per_word(drv, drv->bits_per_word);
+ hw_setup_clock_mode(drv, SPI_MODE_0);
+
+ /* Enable master mode and clear error flags */
+ ltq_writel(&drv->regs->whbstate, LTQ_SPI_WHBSTATE_SETMS |
+ LTQ_SPI_WHBSTATE_CLR_ERRORS);
+
+ /* Reset GPIO/CS registers */
+ ltq_writel(&drv->regs->gpocon, 0);
+ ltq_writel(&drv->regs->fgpo, 0xFF00);
+
+ /* Enable and flush FIFOs */
+ hw_reset_fifos(drv);
+
+ /* SPI/DIN input */
+ gpio_set_altfunc(16, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
+ /* SPI/DOUT output */
+ gpio_set_altfunc(17, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* SPI/CLK output */
+ gpio_set_altfunc(18, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
+
+static void tx_fifo_write(struct ltq_spi_drv_data *drv)
+{
+ const u8 *tx8;
+ const u16 *tx16;
+ const u32 *tx32;
+ u32 data;
+ unsigned int tx_free = tx_fifo_free(drv);
+
+ while (drv->tx_todo && tx_free) {
+ switch (drv->bits_per_word) {
+ case 8:
+ tx8 = drv->tx;
+ data = *tx8;
+ drv->tx_todo--;
+ drv->tx++;
+ break;
+ case 16:
+ tx16 = (u16 *) drv->tx;
+ data = *tx16;
+ drv->tx_todo -= 2;
+ drv->tx += 2;
+ break;
+ case 32:
+ tx32 = (u32 *) drv->tx;
+ data = *tx32;
+ drv->tx_todo -= 4;
+ drv->tx += 4;
+ break;
+ default:
+ return;
+ }
+
+ ltq_writel(&drv->regs->tb, data);
+ tx_free--;
+ }
+}
+
+static void rx_fifo_read_full_duplex(struct ltq_spi_drv_data *drv)
+{
+ u8 *rx8;
+ u16 *rx16;
+ u32 *rx32;
+ u32 data;
+ unsigned int rx_fill = rx_fifo_level(drv);
+
+ while (rx_fill) {
+ data = ltq_readl(&drv->regs->rb);
+
+ switch (drv->bits_per_word) {
+ case 8:
+ rx8 = drv->rx;
+ *rx8 = data;
+ drv->rx_todo--;
+ drv->rx++;
+ break;
+ case 16:
+ rx16 = (u16 *) drv->rx;
+ *rx16 = data;
+ drv->rx_todo -= 2;
+ drv->rx += 2;
+ break;
+ case 32:
+ rx32 = (u32 *) drv->rx;
+ *rx32 = data;
+ drv->rx_todo -= 4;
+ drv->rx += 4;
+ break;
+ default:
+ return;
+ }
+
+ rx_fill--;
+ }
+}
+
+static void rx_fifo_read_half_duplex(struct ltq_spi_drv_data *drv)
+{
+ u32 data, *rx32;
+ u8 *rx8;
+ unsigned int rxbv, shift;
+ unsigned int rx_fill = rx_fifo_level(drv);
+
+ /*
+ * In RX-only mode the bits per word value is ignored by HW. A value
+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read.
+ * If remaining RX bytes are less than 4, the FIFO must be read
+ * differently. The amount of received and valid bytes is indicated
+ * by STAT.RXBV register value.
+ */
+ while (rx_fill) {
+ if (drv->rx_todo < 4) {
+ rxbv = (ltq_readl(&drv->regs->stat) &
+ LTQ_SPI_STAT_RXBV_MASK) >>
+ LTQ_SPI_STAT_RXBV_SHIFT;
+ data = ltq_readl(&drv->regs->rb);
+
+ shift = (rxbv - 1) * 8;
+ rx8 = drv->rx;
+
+ while (rxbv) {
+ *rx8++ = (data >> shift) & 0xFF;
+ rxbv--;
+ shift -= 8;
+ drv->rx_todo--;
+ drv->rx++;
+
+ if (drv->rx_req)
+ drv->rx_req --;
+ }
+ } else {
+ data = ltq_readl(&drv->regs->rb);
+ rx32 = (u32 *) drv->rx;
+
+ *rx32++ = data;
+ drv->rx_todo -= 4;
+ drv->rx += 4;
+
+ if (drv->rx_req >= 4)
+ drv->rx_req -= 4;
+ }
+ rx_fill--;
+ }
+}
+
+static void rx_request(struct ltq_spi_drv_data *drv)
+{
+ unsigned int rxreq, rxreq_max;
+
+ if (drv->rx_req)
+ return;
+
+ /*
+ * To avoid receive overflows at high clocks it is better to request
+ * only the amount of bytes that fits into all FIFOs. This value
+ * depends on the FIFO size implemented in hardware.
+ */
+ rxreq = drv->rx_todo;
+ rxreq_max = rx_fifo_size(drv) * 4;
+ if (rxreq > rxreq_max)
+ rxreq = rxreq_max;
+
+ drv->rx_req = rxreq;
+ ltq_writel(&drv->regs->rxreq, rxreq);
+}
+
+void spi_init(void)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct ltq_spi_drv_data *drv;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ drv = ltq_spi_slave_alloc(bus, cs);
+ if (!drv)
+ return NULL;
+
+ drv->regs = (struct ltq_spi_regs *) CKSEG1ADDR(LTQ_SPI_BASE);
+
+ hw_init(drv);
+
+ drv->max_hz = max_hz;
+ drv->mode = mode;
+
+ return &drv->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ ltq_spi_slave_free(slave);
+}
+
+static int ltq_spi_wait_ready(struct ltq_spi_drv_data *drv)
+{
+ const unsigned long timeout = 20000;
+ unsigned long timebase;
+
+ timebase = get_timer(0);
+
+ do {
+ WATCHDOG_RESET();
+
+ if (!hw_is_busy(drv))
+ return 0;
+ } while (get_timer(timebase) < timeout);
+
+ return 1;
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct ltq_spi_drv_data *drv = to_ltq_spi_slave(slave);
+ int ret;
+
+ ret = ltq_spi_wait_ready(drv);
+ if (ret) {
+ debug("cannot claim bus\n");
+ return ret;
+ }
+
+ hw_enter_config_mode(drv);
+ hw_setup_clock_mode(drv, drv->mode);
+ hw_setup_speed_hz(drv, drv->max_hz);
+ hw_setup_bits_per_word(drv, drv->bits_per_word);
+ hw_enter_active_mode(drv);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct ltq_spi_drv_data *drv = to_ltq_spi_slave(slave);
+
+ hw_enter_config_mode(drv);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+
+ struct ltq_spi_drv_data *drv = to_ltq_spi_slave(slave);
+ int ret = 0;
+
+ if (bitlen % 8)
+ return 1;
+
+ if (!bitlen) {
+ ret = 0;
+ goto done;
+ }
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ drv->tx = dout;
+ drv->tx_todo = 0;
+ drv->rx = din;
+ drv->rx_todo = 0;
+ hw_set_rxtx(drv);
+
+ if (drv->tx) {
+ drv->tx_todo = bitlen / 8;
+
+ tx_fifo_write(drv);
+ }
+
+ if (drv->rx) {
+ drv->rx_todo = bitlen / 8;
+
+ if (!drv->tx)
+ rx_request(drv);
+ }
+
+ for (;;) {
+ if (drv->tx) {
+ if (drv->rx && drv->rx_todo)
+ rx_fifo_read_full_duplex(drv);
+
+ if (drv->tx_todo)
+ tx_fifo_write(drv);
+ else
+ goto done;
+ } else if (drv->rx) {
+ if (drv->rx_todo) {
+ rx_fifo_read_half_duplex(drv);
+
+ if (drv->rx_todo)
+ rx_request(drv);
+ else
+ goto done;
+ } else {
+ goto done;
+ }
+ }
+ }
+
+done:
+ ret = ltq_spi_wait_ready(drv);
+
+ drv->rx = NULL;
+ drv->tx = NULL;
+ hw_set_rxtx(drv);
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return ret;
+}
--- /dev/null
+++ b/include/configs/easy50712.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MACH_TYPE "EASY50712"
+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
+#define CONFIG_BOARD_NAME "Lantiq EASY50712 Danube Reference Board"
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
+
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
+
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
+
+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL /* Have an AT45DB321D serial flash */
+
+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
+
+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
+
+#define CONFIG_LTQ_SPL_COMP_LZO
+#define CONFIG_LTQ_SPL_CONSOLE
+
+/* Switch devices */
+#define CONFIG_SWITCH_MULTI
+#define CONFIG_SWITCH_ADM6996I
+
+/* Environment */
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 2
+#define CONFIG_ENV_SPI_MAX_HZ 20000000
+#define CONFIG_ENV_SPI_MODE 0
+
+#if defined(CONFIG_SYS_BOOT_NOR)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (256 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#elif defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (128 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
+/* Commands */
+#define CONFIG_CMD_PING
+
+/* Pull in default board configs for Lantiq XWAY Danube */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_UPDATE_UBOOT_NOR
+
+#endif /* __CONFIG_H */
--- /dev/null
+++ b/include/configs/easy80920.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MACH_TYPE "EASY80920"
+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
+#define CONFIG_BOARD_NAME "Lantiq EASY80920 VRX200 Family Board"
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
+
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
+
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
+
+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
+#define CONFIG_SPI_FLASH_MACRONIX /* Have a MX29LV620 serial flash */
+
+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
+
+#define CONFIG_LTQ_SUPPORT_SPL_SPI_FLASH /* Build SPI flash SPL */
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 4
+#define CONFIG_SPL_SPI_MAX_HZ 25000000
+#define CONFIG_SPL_SPI_MODE 0
+
+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
+
+#define CONFIG_LTQ_SPL_COMP_LZO
+#define CONFIG_LTQ_SPL_CONSOLE
+
+#define CONFIG_SYS_DRAM_PROBE
+
+/* Environment */
+#define CONFIG_ENV_SPI_BUS CONFIG_SPL_SPI_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SPL_SPI_CS
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SPL_SPI_MAX_HZ
+#define CONFIG_ENV_SPI_MODE CONFIG_SPL_SPI_MODE
+
+#if defined(CONFIG_SYS_BOOT_NOR)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (384 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#elif defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (192 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#elif defined(CONFIG_SYS_BOOT_SFSPL)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (192 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
+/* Commands */
+#define CONFIG_CMD_PING
+
+/* Pull in default board configs for Lantiq XWAY VRX200 */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
+
+#define CONFIG_ENV_UPDATE_UBOOT_SF \
+ "update-uboot-sf=run load-uboot-sfspl-lzo write-uboot-sf\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_UPDATE_UBOOT_NOR \
+ CONFIG_ENV_UPDATE_UBOOT_SF
+
+#endif /* __CONFIG_H */
--- a/include/phy.h
+++ b/include/phy.h
@@ -214,6 +214,7 @@ int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_davicom_init(void);
int phy_et1011c_init(void);
+int phy_lantiq_init(void);
int phy_lxt_init(void);
int phy_marvell_init(void);
int phy_micrel_init(void);
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -100,6 +100,8 @@ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += dri
LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/libwatchdog.o
+LIBS-$(CONFIG_SPL_LZMA_SUPPORT) += lib/lzma/liblzma.o
+LIBS-$(CONFIG_SPL_LZO_SUPPORT) += lib/lzo/liblzo.o
ifneq ($(CONFIG_OMAP_COMMON),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -2,6 +2,7 @@
/envcrc
/gen_eth_addr
/img2srec
+/ltq-boot-image
/kwboot
/mkenvimage
/mkimage
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -49,6 +49,7 @@ BIN_FILES-$(CONFIG_VIDEO_LOGO) += bmp_lo
BIN_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc$(SFX)
BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
+BIN_FILES-$(CONFIG_SOC_LANTIQ) += ltq-boot-image$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
@@ -95,6 +96,7 @@ OBJ_FILES-$(CONFIG_MX28) += mxsboot.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o
+OBJ_FILES-$(CONFIG_SOC_LANTIQ) += ltq-boot-image.o
OBJ_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo.o
OBJ_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes.o
@@ -195,6 +197,10 @@ $(obj)img2srec$(SFX): $(obj)img2srec.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+$(obj)ltq-boot-image$(SFX): $(obj)ltq-boot-image.o
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
+ $(HOSTSTRIP) $@
+
$(obj)xway-swap-bytes$(SFX): $(obj)xway-swap-bytes.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
--- /dev/null
+++ b/tools/ltq-boot-image.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <compiler.h>
+#include <sys/stat.h>
+
+enum image_types {
+ IMAGE_NONE,
+ IMAGE_SFSPL
+};
+
+/* Lantiq non-volatile bootstrap command IDs */
+enum nvb_cmd_ids {
+ NVB_CMD_DEBUG = 0x11,
+ NVB_CMD_REGCFG = 0x22,
+ NVB_CMD_IDWNLD = 0x33,
+ NVB_CMD_CDWNLD = 0x44,
+ NVB_CMD_DWNLD = 0x55,
+ NVB_CMD_IFCFG = 0x66,
+ NVB_CMD_START = 0x77
+};
+
+/* Lantiq non-volatile bootstrap command flags */
+enum nvb_cmd_flags {
+ NVB_FLAG_START = 1,
+ NVB_FLAG_DEC = (1 << 1),
+ NVB_FLAG_DBG = (1 << 2),
+ NVB_FLAG_SDBG = (1 << 3),
+ NVB_FLAG_CFG0 = (1 << 4),
+ NVB_FLAG_CFG1 = (1 << 5),
+ NVB_FLAG_CFG2 = (1 << 6),
+ NVB_FLAG_RST = (1 << 7)
+};
+
+struct args {
+ enum image_types type;
+ __u32 entry_addr;
+ const char *uboot_bin;
+ const char *spl_bin;
+ const char *out_bin;
+};
+
+static void usage_msg(const char *name)
+{
+ fprintf(stderr, "%s: [-h] -t type -e entry-addr -u uboot-bin [-s spl-bin] -o out-bin\n",
+ name);
+ fprintf(stderr, " Image types:\n"
+ " sfspl - SPL + [compressed] U-Boot for SPI flash\n");
+}
+
+static enum image_types parse_image_type(const char *type)
+{
+ if (!type)
+ return IMAGE_NONE;
+
+ if (!strncmp(type, "sfspl", 6))
+ return IMAGE_SFSPL;
+
+ return IMAGE_NONE;
+}
+
+static int parse_args(int argc, char *argv[], struct args *arg)
+{
+ int opt;
+
+ memset(arg, 0, sizeof(*arg));
+
+ while ((opt = getopt(argc, argv, "ht:e:u:s:o:")) != -1) {
+ switch (opt) {
+ case 'h':
+ usage_msg(argv[0]);
+ return 1;
+ case 't':
+ arg->type = parse_image_type(optarg);
+ break;
+ case 'e':
+ arg->entry_addr = strtoul(optarg, NULL, 16);
+ break;
+ case 'u':
+ arg->uboot_bin = optarg;
+ break;
+ case 's':
+ arg->spl_bin = optarg;
+ break;
+ case 'o':
+ arg->out_bin = optarg;
+ break;
+ default:
+ fprintf(stderr, "Invalid option -%c\n", opt);
+ goto parse_error;
+ }
+ }
+
+ if (arg->type == IMAGE_NONE) {
+ fprintf(stderr, "Invalid image type\n");
+ goto parse_error;
+ }
+
+ if (!arg->uboot_bin) {
+ fprintf(stderr, "Missing U-Boot binary\n");
+ goto parse_error;
+ }
+
+ if (!arg->out_bin) {
+ fprintf(stderr, "Missing output binary\n");
+ goto parse_error;
+ }
+
+ if (arg->type == IMAGE_SFSPL && !arg->spl_bin) {
+ fprintf(stderr, "Missing SPL binary\n");
+ goto parse_error;
+ }
+
+ return 0;
+
+parse_error:
+ usage_msg(argv[0]);
+ return -1;
+}
+
+static __u32 build_nvb_command(unsigned cmdid, unsigned cmdflags)
+{
+ __u32 cmd;
+ __u16 tag;
+
+ tag = (cmdid << 8) | cmdflags;
+ cmd = (tag << 16) | (0xFFFF - tag);
+
+ return cpu_to_be32(cmd);
+}
+
+static int write_header(int fd, const void *hdr, size_t size)
+{
+ ssize_t n;
+
+ n = write(fd, hdr, size);
+ if (n != size) {
+ fprintf(stderr, "Cannot write header: %s\n",
+ strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+static int write_nvb_dwnld_header(int fd, size_t size, __u32 addr)
+{
+ __u32 hdr[3];
+
+ hdr[0] = build_nvb_command(NVB_CMD_DWNLD, NVB_FLAG_START |
+ NVB_FLAG_SDBG);
+ hdr[1] = cpu_to_be32(size + 4);
+ hdr[2] = cpu_to_be32(addr);
+
+ return write_header(fd, hdr, sizeof(hdr));
+}
+
+static int write_nvb_start_header(int fd, __u32 addr)
+{
+ __u32 hdr[3];
+
+ hdr[0] = build_nvb_command(NVB_CMD_START, NVB_FLAG_SDBG);
+ hdr[1] = cpu_to_be32(4);
+ hdr[2] = cpu_to_be32(addr);
+
+ return write_header(fd, hdr, sizeof(hdr));
+}
+
+static int open_input_bin(const char *name, void **ptr, size_t *size)
+{
+ struct stat sbuf;
+ int ret, fd;
+
+ fd = open(name, O_RDONLY | O_BINARY);
+ if (0 > fd) {
+ fprintf(stderr, "Cannot open %s: %s\n", name,
+ strerror(errno));
+ return -1;
+ }
+
+ ret = fstat(fd, &sbuf);
+ if (0 > ret) {
+ fprintf(stderr, "Cannot fstat %s: %s\n", name,
+ strerror(errno));
+ return -1;
+ }
+
+ *ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, fd, 0);
+ if (*ptr == MAP_FAILED) {
+ fprintf(stderr, "Cannot mmap %s: %s\n", name,
+ strerror(errno));
+ return -1;
+ }
+
+ *size = sbuf.st_size;
+
+ return fd;
+}
+
+static void close_input_bin(int fd, void *ptr, size_t size)
+{
+ munmap(ptr, size);
+ close(fd);
+}
+
+static int copy_bin(int fd, void *ptr, size_t size)
+{
+ ssize_t n;
+
+ n = write(fd, ptr, size);
+ if (n != size) {
+ fprintf(stderr, "Cannot copy binary: %s\n", strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+static int open_output_bin(const char *name)
+{
+ int fd;
+
+ fd = open(name, O_RDWR | O_CREAT | O_TRUNC | O_BINARY, 0666);
+ if (0 > fd) {
+ fprintf(stderr, "Cannot open %s: %s\n", name,
+ strerror(errno));
+ return -1;
+ }
+
+ return fd;
+}
+
+static int create_sfspl(const struct args *arg)
+{
+ int out_fd, uboot_fd, spl_fd, ret;
+ void *uboot_ptr, *spl_ptr;
+ size_t uboot_size, spl_size;
+
+ out_fd = open_output_bin(arg->out_bin);
+ if (0 > out_fd)
+ goto err;
+
+ spl_fd = open_input_bin(arg->spl_bin, &spl_ptr, &spl_size);
+ if (0 > spl_fd)
+ goto err_spl;
+
+ uboot_fd = open_input_bin(arg->uboot_bin, &uboot_ptr, &uboot_size);
+ if (0 > uboot_fd)
+ goto err_uboot;
+
+ ret = write_nvb_dwnld_header(out_fd, spl_size, arg->entry_addr);
+ if (ret)
+ goto err_write;
+
+ ret = copy_bin(out_fd, spl_ptr, spl_size);
+ if (ret)
+ goto err_write;
+
+ ret = write_nvb_start_header(out_fd, arg->entry_addr);
+ if (ret)
+ goto err_write;
+
+ ret = copy_bin(out_fd, uboot_ptr, uboot_size);
+ if (ret)
+ goto err_write;
+
+ close_input_bin(uboot_fd, uboot_ptr, uboot_size);
+ close_input_bin(spl_fd, spl_ptr, spl_size);
+ close(out_fd);
+
+ return 0;
+
+err_write:
+ close_input_bin(uboot_fd, uboot_ptr, uboot_size);
+err_uboot:
+ close_input_bin(spl_fd, spl_ptr, spl_size);
+err_spl:
+ close(out_fd);
+err:
+ return -1;
+}
+
+int main(int argc, char *argv[])
+{
+ int ret;
+ struct args arg;
+
+ ret = parse_args(argc, argv, &arg);
+ if (ret)
+ goto done;
+
+ switch (arg.type) {
+ case IMAGE_SFSPL:
+ ret = create_sfspl(&arg);
+ break;
+ default:
+ fprintf(stderr, "Image type not implemented\n");
+ ret = -1;
+ break;
+ }
+
+done:
+ if (ret >= 0)
+ return EXIT_SUCCESS;
+
+ return EXIT_FAILURE;
+}
View Git Blame Copy Permalink