openwrt_deco_e4r/target/linux/ar71xx/db120.dts

/*
 * Copyright (c) 2013 The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation.
 */

/dts-v1/;

/ {
	model = "Qualcomm Atheros DB120";
	compatible = "ath79,db120";
	#address-cells = <1>;
	#size-cells = <1>;
	interrupt-parent = <&vic>;

	gpios: ath79-gpio {
		#gpio-cells = <2>;
		gpio-controller;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		vic: intc {
			compatible = "interrupt-controller";
			interrupt-controller;
			#interrupt-cells = <1>;
		};

		ehci@1b000000 {
			compatible = "qcom,ag71xx-ehci";
			reg = <0x1b000000 0x20000>;
			interrupts = <3>;
			interrupt-parent = <&vic>;
		};

		spi@1f000000 {
			compatible = "qcom,ag71xx-spi";	 /* master */
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x1f000000 0x01000000>;

			flash: m25p80@0 {
				compatible = "st,m25p80";	/* modalias */
				#address-cells = <1>;
				#size-cells = <1>;
				spi-max-frequency = <25000000>; /* max_speed_hz */
				reg = <0>;			/* chip_select */
				spi-controller-data = <1 0 0>;  /* is_flash cs_type cs_line */

				partition@u-boot {
					label = "u-boot";
					reg = <0x00000000 0x00040000>;
                                        read-only;
                                };
				partition@u-boot-env {
					label = "u-boot-env";
					reg = <0x00040000 0x00010000>;
                                        read-only;
                                };
                                partition@rootfs {
                                        label = "rootfs";
                                        reg = <0x00050000 0x00630000>;
                                };
                                partition@kernel {
                                        label = "kernel";
                                        reg = <0x00680000 0x00160000>;
                                        read-only;
                                };
                                partition@dtb {
                                        label = "dtb";
                                        reg = <0x007e0000 0x00010000>;
                                        read-only;
                                };
                                partition@art {
                                        label = "art";
                                        reg = <0x007f0000 0x00010000>;
                                        read-only;
                                };
                                partition@firmware {
                                        label = "firmware";
                                        reg = <0x00050000 0x00790000>;
                                };
			};
		};

		pci@10000000 {
			compatible = "qcom,ag71xx-pci";
			reg = <0x10000000 0x04000000>,
			      <0x00000000 0x00000000>,
			      <0x14000000 0x00001000>,
			      <0x180f0000 0x00000100>,
			      <0x180c0000 0x00001000>;
			reg-names = "mem_base",
				    "io_base",
				    "cfg_base",
				    "ctrl_base",
				    "crp_base";
			interrupts = <46>;
			interrupt-parent = <&vic>;
		};

		wmac@18100000 {
			compatible = "qcom,ag71xx-wmac";
			reg = <0x18100000 0x20000>;
			interrupts = <47>;
			interrupt-parent = <&vic>;
		};

		MDIO0: mdio@19000000 {
			compatible = "qcom,ag71xx-mdio";
			reg = <0x19000000 0x200>;
			reg-names = "mdio_base";

			bi-phy-addr = <0>;
			bi-port0-cfg = <1 2 1 1 1>; /* force_link speed:1G txpause rxpause duplex */
			bi-led-cfg = <0 0xc737c737 0 0x00c30c00 1>; /* led_ctrl0 led_ctrl1 led_ctrl2 led_ctrl3 open_drain*/
			bi-pad0-cfg = <6 0 0 0 1 1 1 2 0 0>; /* mode rxclk_sel txclk_sel pipe_rxclk_sel txclk_delay_en
				rxclk_delay_en txclk_delay_sel rxclk_delay_sel sgmii_txclk_phase_sel sgmii_rxclk_phase_sel */
		};

		MDIO1: mdio@1a000000 {
			compatible = "qcom,ag71xx-mdio";
			reg = <0x1a000000 0x200>;
			reg-names = "mdio_base";
		};

		ETH0: ethernet@19000000 { /* s17 */
			compatible = "qcom,ag71xx-eth";
			reg = <0x19000000 0x200>,
			      <0x18070000 0x14>;
			reg-names = "mac_base",
				"cfg_base";
			interrupts = <4>;
			interrupt-names = "mac_irq";
			interrupt-parent = <&vic>;
			mdio-handle = <&MDIO0>;

			eth-cfg = <0x00000041>; /* RGMII_GMAC0 | SW_ONLY_MODE */
			eth-phy-cfg = <6 1 1000 1>; /* phy_if_mode:RGMII phy_mask:1 speed:1G duplex:DUPLEX_FULL */
			eth-pll-data = <0 0 0x06000000>; /* pll_10 pll_100 pll_1000 */
		};

		ETH1: ethernet@1a000000 { /* s27 */
			compatible = "qcom,ag71xx-eth";
			reg = <0x1a000000 0x200>;
			reg-names = "mac_base";
			interrupts = <5>;
			interrupt-names = "mac_irq";
			interrupt-parent = <&vic>;
			mdio-handle = <&MDIO1>;

			eth-phy-cfg = <2 0 1000 1>; /* phy_if_mode:GMII phy_mask:0 speed:1G duplex:DUPLEX_FULL */
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		wps {
			label = "wps";
			gpios = <&gpios 16 1>;
			linux,code = <529>; /* KEY_WPS_BUTTON */
			debounce-interval = <60>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		pwr-green {
			label = "db120:green:pwr";
			gpios = <&gpios 17 1>;
			linux,default-trigger = "default-on";
		};

		pwr-red {
			label = "db120:red:pwr";
			gpios = <&gpios 21 1>;
			default-state = "off";
		};

		wlan2g {
			label = "db120:green:wlan-2g";
			gpios = <&gpios 13 1>;
			default-state = "off";
		};

		wlan5g {
			label = "db120:green:wlan-5g";
			gpios = <&gpios 4 1>;
			default-state = "off";
		};

		wps {
			label = "db120:green:wps";
			gpios = <&gpios 15 1>;
			default-state = "off";
		};

		usb {
			label = "db120:green:usb";
			gpios = <&gpios 11 1>;
			default-state = "off";
		};
	};
};