209 lines
6.8 KiB
INI
209 lines
6.8 KiB
INI
#############################################################################
|
|
# Sample NRPE Config File
|
|
# Written by: Ethan Galstad (nagios@nagios.org)
|
|
#
|
|
# Last Modified: 03-09-2007
|
|
#
|
|
# NOTES:
|
|
# This is a sample configuration file for the NRPE daemon. It needs to be
|
|
# located on the remote host that is running the NRPE daemon, not the host
|
|
# from which the check_nrpe client is being executed.
|
|
#############################################################################
|
|
|
|
|
|
# PID FILE
|
|
# The name of the file in which the NRPE daemon should write it's process ID
|
|
# number. The file is only written if the NRPE daemon is started by the root
|
|
# user and is running in standalone mode.
|
|
|
|
pid_file=/var/run/nrpe.pid
|
|
|
|
|
|
|
|
# PORT NUMBER
|
|
# Port number we should wait for connections on.
|
|
# NOTE: This must be a non-priviledged port (i.e. > 1024).
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
server_port=5666
|
|
|
|
|
|
|
|
# SERVER ADDRESS
|
|
# Address that nrpe should bind to in case there are more than one interface
|
|
# and you do not want nrpe to bind on all interfaces.
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
server_address=192.168.1.1
|
|
|
|
|
|
# NRPE USER
|
|
# This determines the effective user that the NRPE daemon should run as.
|
|
# You can either supply a username or a UID.
|
|
#
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
nrpe_user=nagios
|
|
|
|
|
|
|
|
# NRPE GROUP
|
|
# This determines the effective group that the NRPE daemon should run as.
|
|
# You can either supply a group name or a GID.
|
|
#
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
nrpe_group=nagios
|
|
|
|
|
|
|
|
# ALLOWED HOST ADDRESSES
|
|
# This is an optional comma-delimited list of IP address or hostnames
|
|
# that are allowed to talk to the NRPE daemon.
|
|
#
|
|
# Note: The daemon only does rudimentary checking of the client's IP
|
|
# address. I would highly recommend adding entries in your /etc/hosts.allow
|
|
# file to allow only the specified host to connect to the port
|
|
# you are running this daemon on.
|
|
#
|
|
# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
|
|
|
|
allowed_hosts=192.168.1.2
|
|
|
|
|
|
|
|
# COMMAND ARGUMENT PROCESSING
|
|
# This option determines whether or not the NRPE daemon will allow clients
|
|
# to specify arguments to commands that are executed. This option only works
|
|
# if the daemon was configured with the --enable-command-args configure script
|
|
# option.
|
|
#
|
|
# *** ENABLING THIS OPTION IS A SECURITY RISK! ***
|
|
# Read the SECURITY file for information on some of the security implications
|
|
# of enabling this variable.
|
|
#
|
|
# Values: 0=do not allow arguments, 1=allow command arguments
|
|
|
|
dont_blame_nrpe=0
|
|
|
|
|
|
|
|
# COMMAND PREFIX
|
|
# This option allows you to prefix all commands with a user-defined string.
|
|
# A space is automatically added between the specified prefix string and the
|
|
# command line from the command definition.
|
|
#
|
|
# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
|
|
# Usage scenario:
|
|
# Execute restricted commmands using sudo. For this to work, you need to add
|
|
# the nagios user to your /etc/sudoers. An example entry for alllowing
|
|
# execution of the plugins from might be:
|
|
#
|
|
# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
|
|
#
|
|
# This lets the nagios user run all commands in that directory (and only them)
|
|
# without asking for a password. If you do this, make sure you don't give
|
|
# random users write access to that directory or its contents!
|
|
|
|
# command_prefix=/usr/bin/sudo
|
|
|
|
|
|
|
|
# DEBUGGING OPTION
|
|
# This option determines whether or not debugging messages are logged to the
|
|
# syslog facility.
|
|
# Values: 0=debugging off, 1=debugging on
|
|
|
|
debug=0
|
|
|
|
|
|
|
|
# COMMAND TIMEOUT
|
|
# This specifies the maximum number of seconds that the NRPE daemon will
|
|
# allow plugins to finish executing before killing them off.
|
|
|
|
command_timeout=60
|
|
|
|
|
|
|
|
# CONNECTION TIMEOUT
|
|
# This specifies the maximum number of seconds that the NRPE daemon will
|
|
# wait for a connection to be established before exiting. This is sometimes
|
|
# seen where a network problem stops the SSL being established even though
|
|
# all network sessions are connected. This causes the nrpe daemons to
|
|
# accumulate, eating system resources. Do not set this too low.
|
|
|
|
connection_timeout=300
|
|
|
|
|
|
|
|
# WEEK RANDOM SEED OPTION
|
|
# This directive allows you to use SSL even if your system does not have
|
|
# a /dev/random or /dev/urandom (on purpose or because the necessary patches
|
|
# were not applied). The random number generator will be seeded from a file
|
|
# which is either a file pointed to by the environment valiable $RANDFILE
|
|
# or $HOME/.rnd. If neither exists, the pseudo random number generator will
|
|
# be initialized and a warning will be issued.
|
|
# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
|
|
|
|
#allow_weak_random_seed=1
|
|
|
|
|
|
|
|
# INCLUDE CONFIG FILE
|
|
# This directive allows you to include definitions from an external config file.
|
|
|
|
#include=<somefile.cfg>
|
|
|
|
|
|
|
|
# INCLUDE CONFIG DIRECTORY
|
|
# This directive allows you to include definitions from config files (with a
|
|
# .cfg extension) in one or more directories (with recursion).
|
|
|
|
#include_dir=<somedirectory>
|
|
#include_dir=<someotherdirectory>
|
|
|
|
|
|
|
|
# COMMAND DEFINITIONS
|
|
# Command definitions that this daemon will run. Definitions
|
|
# are in the following format:
|
|
#
|
|
# command[<command_name>]=<command_line>
|
|
#
|
|
# When the daemon receives a request to return the results of <command_name>
|
|
# it will execute the command specified by the <command_line> argument.
|
|
#
|
|
# Unlike Nagios, the command line cannot contain macros - it must be
|
|
# typed exactly as it should be executed.
|
|
#
|
|
# Note: Any plugins that are used in the command lines must reside
|
|
# on the machine that this daemon is running on! The examples below
|
|
# assume that you have plugins installed in a /usr/local/nagios/libexec
|
|
# directory. Also note that you will have to modify the definitions below
|
|
# to match the argument format the plugins expect. Remember, these are
|
|
# examples only!
|
|
|
|
|
|
# The following examples use hardcoded command arguments...
|
|
|
|
command[check_users]=/usr/libexec/nagios/check_users -w 3 -c 5
|
|
command[check_load]=/usr/libexec/nagios/check_load -w 7,4,2 -c 10,5,3
|
|
command[check_tmp]=/usr/libexec/nagios/check_disk -w 50% -c 25% -p /tmp
|
|
command[check_zombie_procs]=/usr/libexec/nagios/check_procs -w 1 -c 3 -s Z
|
|
command[check_total_procs]=/usr/libexec/nagios/check_procs -w 25 -c 30
|
|
|
|
|
|
|
|
# The following examples allow user-supplied arguments and can
|
|
# only be used if the NRPE daemon was compiled with support for
|
|
# command arguments *AND* the dont_blame_nrpe directive in this
|
|
# config file is set to '1'. This poses a potential security risk, so
|
|
# make sure you read the SECURITY file before doing this.
|
|
|
|
#command[check_users]=/usr/lib/check_users -w $ARG1$ -c $ARG2$
|
|
#command[check_load]=/usr/lib/check_load -w $ARG1$ -c $ARG2$
|
|
#command[check_disk]=/usr/lib/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
|
|
#command[check_procs]=/usr/lib/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
|