openwrt_archive/target/linux/ramips/dts/TEW-692GR.dts
Luka Perkov 2a522a9142 ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

SVN-Revision: 49357
2016-05-10 22:37:24 +00:00

129 lines
1.8 KiB
Plaintext

/dts-v1/;
#include "rt3883.dtsi"
/ {
compatible = "TEW-692GR", "ralink,rt3883-soc";
model = "TRENDnet TEW-692GR";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
status = "okay";
mtd-mac-address = <&factory 0x28>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
pci@10140000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
};
};
};
wmac@10180000 {
ralink,5ghz = <0>;
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x0030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x007b0000>;
label = "firmware";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "tew-692gr:orange:wps";
gpios = <&gpio0 9 1>;
};
wps2 {
label = "tew-692gr:green:wps";
gpios = <&gpio1 4 1>;
};
};
};