openwrt_archive/target/linux/ramips/dts/MZK-EX750NP.dts
Luka Perkov 2a522a9142 ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

SVN-Revision: 49357
2016-05-10 22:37:24 +00:00

151 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex MZK-EX750NP";
palmbus@10000000 {
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x730000>;
};
partition@780000 {
label = "Udata";
reg = <0x780000 0x80000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pcie@10140000 {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "mzk-ex750np:red:power";
gpios = <&gpio0 14 1>;
};
wifi {
label = "mzk-ex750np:red:wifi";
gpios = <&gpio3 0 1>;
};
wps {
label = "mzk-ex750np:green:wps";
gpios = <&gpio0 10 1>;
};
rep {
label = "mzk-ex750np:blue:rep";
gpios = <&gpio2 16 1>;
};
wifi1 {
label = "mzk-ex750np:blue:wifi1";
gpios = <&gpio2 19 1>;
};
wifi2 {
label = "mzk-ex750np:blue:wifi2";
gpios = <&gpio2 18 1>;
};
wifi3 {
label = "mzk-ex750np:blue:wifi3";
gpios = <&gpio2 17 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 13 0>;
linux,code = <0x211>;
};
};
};