openwrt_archive/target/linux/ramips/dts/DIR-645.dts
Luka Perkov 2a522a9142 ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

SVN-Revision: 49357
2016-05-10 22:37:24 +00:00

143 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "rt3883.dtsi"
/ {
compatible = "DIR-645", "ralink,rt3883-soc";
model = "D-Link DIR-645";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <25000000>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x4000>;
read-only;
};
factory: partition@34000 {
label = "factory";
reg = <0x34000 0x4000>;
read-only;
};
partition@38000 {
label = "nvram";
reg = <0x38000 0x8000>;
read-only;
};
partition@40000 {
label = "devdata";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
port@0 {
mediatek,fixed-link = <1000 1 1 0>;
};
};
wmac@10180000 {
ralink,5ghz = <0>;
ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
rtl8367b {
compatible = "realtek,rtl8367b";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 9 0>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 14 0>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
inet {
label = "dir-645:green:inet";
gpios = <&gpio0 0 1>;
};
wps {
label = "dir-645:green:wps";
gpios = <&gpio1 2 0>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name = "usb";
gpio-export,output = <1>;
gpios = <&gpio1 6 0>;
};
};
};