openwrt_archive/target/linux/ramips/dts/DIR-615-D.dts
Luka Perkov 2a522a9142 ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

SVN-Revision: 49357
2016-05-10 22:37:24 +00:00

106 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
/ {
compatible = "DIR-615-D", "ralink,rt3050-soc";
model = "D-Link DIR-615 D";
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
devdata: partition@30000 {
label = "devdata";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "devconf";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
esw@10110000 {
mediatek,portmap = <0x2f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&devdata 0x4000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "dir-615-d:amber:status";
gpios = <&gpio0 8 1>;
};
status2 {
label = "dir-615-d:green:status";
gpios = <&gpio0 9 1>;
};
wan {
label = "dir-615-d:amber:wan";
gpios = <&gpio0 14 1>;
};
wan2 {
label = "dir-615-d:green:wan";
gpios = <&gpio0 12 1>;
};
wps {
label = "dir-615-d:blue:wps";
gpios = <&gpio0 13 1>;
};
};
};