openwrt_archive/target/linux/ramips/dts/ASL26555-8M.dts
Luka Perkov 2a522a9142 ramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>

SVN-Revision: 49357
2016-05-10 22:37:24 +00:00

151 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
/ {
compatible = "ASL26555", "ralink,rt3050-soc";
model = "Alpha ASL26555";
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "s25sl064p";
spi-max-frequency = <10000000>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
ubootenv: partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "rgdb";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "cert";
reg = <0x7e0000 0x10000>;
read-only;
};
partition@7f0000 {
label = "langpack";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&ubootenv 0x4004>;
};
esw@10110000 {
mediatek,portmap = <0x1e>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&ubootenv 0x4000>;
};
otg@101c0000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 0>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 12 0>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
eth {
label = "asl26555:green:eth";
gpios = <&gpio0 0 1>;
};
wan-red {
label = "asl26555:red:wan";
gpios = <&gpio0 1 0>;
};
wan-green {
label = "asl26555:green:wan";
gpios = <&gpio0 2 0>;
};
wlan {
label = "asl26555:green:wlan";
gpios = <&gpio0 7 0>;
};
power-green {
label = "asl26555:green:power";
gpios = <&gpio0 8 0>;
};
power-red {
label = "asl26555:red:power";
gpios = <&gpio0 9 0>;
};
3g-green {
label = "asl26555:green:3g";
gpios = <&gpio0 14 1>;
};
3g-red {
label = "asl26555:red:3g";
gpios = <&gpio0 17 1>;
};
};
};