f34397d1b7
The following patches were dropped because they are already applied upstream: - 0038-MIPS-lantiq-fpi-on-ar9.patch - 0039-MIPS-lantiq-initialize-usb-on-boot.patch - 0042-USB-DWC2-big-endian-support.patch - 0043-gpio-stp-xway-fix-phy-mask.patch All other patches were simply refreshed, except the following: - 0001-MIPS-lantiq-add-pcie-driver.patch Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled some PMU gates for the vrx200 / VR9 SoCs) were removed since the upstream kernel disables unused PMU gates automatically (since 95135bfa7ead1becc2879230f72583dde2b71a0c "MIPS: Lantiq: Deactivate most of the devices by default"). - 0025-NET-MIPS-lantiq-adds-xrx200-net.patch Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers should use of_get_mac_address(). of_get_mac_address_mtd is not available for drivers anymore since it's called automatically within of_get_mac_address(). - 0028-NET-lantiq-various-etop-fixes.patch Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch While refreshing the kernel configuration SPI support had to be moved to config-4.4 because otherwise M25P80 was disabled. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48307
47 lines
1.5 KiB
Diff
47 lines
1.5 KiB
Diff
--- a/drivers/usb/dwc2/platform.c
|
|
+++ b/drivers/usb/dwc2/platform.c
|
|
@@ -145,6 +145,34 @@ static int __dwc2_lowlevel_hw_enable(str
|
|
return ret;
|
|
}
|
|
|
|
+static const struct dwc2_core_params params_ltq = {
|
|
+ .otg_cap = 2, /* non-HNP/non-SRP */
|
|
+ .otg_ver = -1,
|
|
+ .dma_enable = -1,
|
|
+ .dma_desc_enable = -1,
|
|
+ .speed = -1,
|
|
+ .enable_dynamic_fifo = -1,
|
|
+ .en_multiple_tx_fifo = -1,
|
|
+ .host_rx_fifo_size = 288, /* 288 DWORDs */
|
|
+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
|
|
+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
|
|
+ .max_transfer_size = -1,
|
|
+ .max_packet_count = 511,
|
|
+ .host_channels = -1,
|
|
+ .phy_type = -1,
|
|
+ .phy_utmi_width = -1,
|
|
+ .phy_ulpi_ddr = -1,
|
|
+ .phy_ulpi_ext_vbus = -1,
|
|
+ .i2c_enable = -1,
|
|
+ .ulpi_fs_ls = -1,
|
|
+ .host_support_fs_ls_low_power = -1,
|
|
+ .host_ls_low_power_phy_clk = -1,
|
|
+ .ts_dline = -1,
|
|
+ .reload_ctl = -1,
|
|
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
|
|
+ .uframe_sched = -1,
|
|
+};
|
|
+
|
|
/**
|
|
* dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
|
|
* @hsotg: The driver state
|
|
@@ -310,6 +338,8 @@ static int dwc2_driver_remove(struct pla
|
|
static const struct of_device_id dwc2_of_match_table[] = {
|
|
{ .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
|
|
{ .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 },
|
|
+ { .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = ¶ms_ltq },
|
|
+ { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = ¶ms_ltq },
|
|
{ .compatible = "snps,dwc2", .data = NULL },
|
|
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
|
|
{},
|