openwrt_archive/target/linux/lantiq/dts/ARV7519RW22.dts
John Crispin d5b866bd33 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-02 18:50:18 +00:00

233 lines
4.3 KiB
Plaintext

/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "ARV7519RW22 - Orange Livebox 2.1";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_green;
failsafe = &power_green;
running = &power_green;
internet = &internet_green;
};
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x60000>;
read-only;
};
partition@60000 {
label = "uboot-env";
reg = <0x60000 0x20000>;
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0x1f00000>;
};
boardconfig: partition@1f80000 {
label = "boardconfig";
reg = <0x1f80000 0x80000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pcie-rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 32 0>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 32 0>;
};
pcie@d900000 {
status = "disabled";
};
pci@E105400 {
status = "disabled";
compatible = "lantiq,pci-xway";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 1>;
linux,code = <0x198>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 33 1>;
linux,code = <0xf7>;
};
wps {
label = "wps";
gpios = <&gpio 37 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
lan_green {
label = "arv7519rw22:green:lan";
gpios = <&gpio 2 1>;
};
internet_red {
label = "arv7519rw22:red:internet";
gpios = <&gpio 10 1>;
};
power_green: power_green {
label = "arv7519rw22:green:power";
gpios = <&gpio 14 1>;
default-state = "keep";
};
alarm_blue {
label = "arv7519rw22:blue:alarm";
gpios = <&gpio 15 1>;
};
internet_orange {
label = "arv7519rw22:orange:internet";
gpios = <&gpio 19 1>;
};
internet_green: internet_green {
label = "arv7519rw22:green:internet";
gpios = <&gpio 28 1>;
};
voice_green {
label = "arv7519rw22:green:voice";
gpios = <&gpio 29 1>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "mii";
phy-handle = <&phy14>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <3>;
phy-mode = "mii";
phy-handle = <&phy12>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy12: ethernet-phy@12 {
reg = <0x12>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
phy14: ethernet-phy@14 {
reg = <0x14>;
compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
};
};
};